[quality] for - car repair system...polyester filler with a high-density content of aluminium that...

Since its inception, Car Repair System’s priority is to ensure the quality of its products and ser-vices. As a consequence, the Quality Department keeps putting all its efforts into working in this direction. This is one of the reasons why the company obtained a certification of quality only half a year after its foundation.

Paying a special attention to markets evolution and new technologies, the development of an active Research & Development Department has become essential. The R&D team, whole sole concern is excellence and pioneering in the sector, updates constantly the range of products.

In this day and age, Car Repair System has managed to establish a new embedded system to check Quality, R&D, Environmental and Social Responsibility management.

[Quality] for System.

This allows the company to obtain and maintain the follow-ing certification:

ISO 9001:2008 [Certification of Quality since 2001]

ISO 14001:2004 [Certification of Environmental Protection since 2005]

UNE 166002:2006 [Certification of Research & Development since 2011]

SA 8000:2008 [Certification of Social Responsibility since 2012]

Behind those efforts since several years, Car Repair System group is now present all over the world trough subsidiaries and distribution agreements. As consequences, the opening of a recent subsidiary in Italy and the good performance of its known subsidiaries in Spain, France, Italy, Portugal and Morocco.

To be present anywhere, the group has succeeded in getting distribution agreements in the rest of Europe and with local importers in Eastem Europe, Northern Africa, Angola, Mozambique, Cape Verde, Middle East, Central América, South America and Australia.

International Presence

14-21

06-12

22-25

26-33

34-37

38-41

42-53

54-59

FILLING & CARBON REPAIR Polyester Fillers and Carbon Fibre Repair

PLASTIC REPAIRPlastic Repair

FILLER, CLEAR COAT & MATT FINISHING REPAIRFillers, Clear Coats, Matt Finishes, Thinners and Degreasers

PROTECT REPAIR Anti-Corrosive Coatings

SEAL REPAIRWindscreen Adhesives and Bodywork Sealers

HIGH EFFICIENCY SYSTEM High Efficiency Products

TECHNO REPAIR Technical Paints

PAINT PREPARATION SYSTEMSPaint Preparation Systems

General Content

68-72

60-67

74-82

84-91

92-104

106-112

114-118

120-132

CAR CAREVehicle Cleaning, Care and Protection

COMPOUNDING REPAIRVehicle Polishing, Buffering and Protection

PERSONAL PROTECTION EQUIPMENTPersonal Protection Equipment

BODYSHOP EQUIPMENTBodyshop Equipment

MASKING SYSTEM & PROTECTIONMasking System and Protection

ABRASIVESAbrasives

ELECTRIC & PNEUMATIC TOOLSWorkshop Tools

ALPHABETICAL INDEX BY DESCRIPTIONShould you know the description of the product, you will find it in the “INDEX BY DESCRIPTION”

7

Filling & Carbon RepairPolyester Fillers and Carbon Fibre Repair

1

Polyester Fillers and Carbon Fibre Repair [Polyester Fillers]

8

Exceptionally low weight ultra-light filler. Extremely compact and easy to spread with a spatula. Exceptional sanding, minimum humidity absorption, great adhesive power and excellent finish. Since it contains no mineral charges, dust is significantly reduced during sanding in comparison to other traditional fillers. Putty with adherent charges and resins over aluminium.

Ref. 5001-006106 White 1000 ml 12 Un.

3-5’ 25’ P150-P220

FILL MULTILIGHT PLUS [Lightweight Filler]

Exceptionally low weight ultra-light filler, that allows for exceptional sanding, minimum humidity absorption and has great adhesive power over zinc and aluminium. Since it contains no mineral charges, the dust is significantly reduced during sanding in comparison to other traditional fillers. Putty with adherent charges and resins over aluminium.

3-5’ 25’ P80-P220

FILL LIGHT PLUS [Lightweight Filler]

Ref. 5001-001082 Blue 1000 ml 12 Un.

Traditional filler with excellent adhering properties on tin, steel, galvanised steel and wood. Ideal for larger fillings and easy to sand. Available in 2 kg cartridges that come with a manual applicator and hardener.

2-4’ 20’ P80-P220

FILL SOFT WHITE [Traditional Filler]

Ref. 5001-001083 White Tin 2 kg 12 Un.

Ref. 5001-001081 White Cartridge 2 kg 12 Un.


9

Traditional beige polyester filler for any kind of repair. Very creamy and compact. Easy to sand and fast drying. Especially indicated for large ridges.

2-4’ 20’ P80-P220

FILL MULTISOFT BEIGE [Traditional Filler]

Ref. 5001-001086 Beige 1.8 kg 10 Un.

Ref. 5001-001092 Beige 3 kg 4 Un.

Polyester filler with a high-density content of aluminium that makes it strongly adhesive on steel, galvanised steel, aluminium, fibreglass, wood, etc. Strong filling power, flexible and easy to sand. Efficient anti-corrosive protection.

Ref. 5001-001125 Dark Grey 1.5 kg 12 Un.

2-4’ 20’ P80-P220

FILL METAL [Special Filler]

FILL GLASS [Special Filler]

Fibreglass polyester filler created especially for filling larger imperfections and rusted areas. It sticks directly to the steel surface or body. Easy to sand.

2-4’ 25’ P60-P150

Ref. 5001-001031 Green 1.8 kg 12 Un.


10

KIT FIBER REPAIR

Kit for fixing fibreglass, metal and other materials. Best used for general repair on industrial vehicles or auto bodywork, as well as tuning.Composition: Polyester resin: 750 ml • Hardener: 30 g • Fibreglass cloth: 500 x 500 mm • Mixing cup and brush.

2-5’ 30’ P60-P150

Ref. 5001-001128 Kit 6 Un.

FILL POLISPRAY [Liquid Filler]

Polyester filler to be spread with a two-component application gun. Used for the filling of shallow sanding marks and scratches. Fast drying. Easy to sand. Hardener included.

20’ 2-3 h 2-3.5 mm

Ref. 5001-000032 Light Grey 1.5 kg 6 Un.

NITRO PUTTY 1K

Nitro putty especially indicated in filling pores and light scratches. Fast drying.

Ref. 5000-000001 Grey Tube 180 g 24 Un.

Filling & Carbon Repair [Réparation de Fibre de Carbone]

11

Black polyester filler for carbon fiber parts repair. Application with spatulas. Fast drying and easy to sand. Compatible with all primers or filler. This filling putty is especially designed for high filling repair and repainting afterward. Included a paste hardener. Mixture 2 - 3 %.

Ref. 5001-001454 Black 500 ml 8 Un.

2-4’ 30’ P120-P220

FILL BLACK CARBON

Transparent acrylic filler of high filing properties. Especially designed to apply on carbon fiber surfaces. Allows leveling and sealing the porosity without losing the transparent coating. Apply a clear coat on the surface to finish the repair process. Application recommended with the 1.6 or 1.8 mm spray guns for filler and primer.

FILLER TRANSPARENT CARBON 2K + HARDENER

Ref. 5001-001456 Transparent 1 l + 300 g 6 Un.

1000 g Filler300 g Hardener100 g Thinner

1-312 h


12

Cleaner tank for spatulas. Especially designed to ensure a fast and efficient cleaning. Compatible with all cleaning solvents. Spatulas cleaning process: introduce the spatula through the groove. The friction between the inner fibre and the solvent permits a perfect cleaning, free of residues.

SPATULA CLEANER

SET OF 4 METAL SPATULAS

Set of four different-sized metal spatulas.

Ref. 2004-001720 50, 80, 100 and 200 mm 10 Sets 4 Un.

SET OF 5 PLASTIC SPATULAS

Set of five hard plastic spatulas for filler application. Best used for the application of adhesives and stickers.

Ref. 2004-001620 5 x 100 mm 10 Sets 5 Un.

Flexible rubber spatula used for applying filler on curved surfaces. It adapts to the shape making for an even spread. Resistant to cleaning solvents.

WHITE RUBBER SPATULAS

Ref. 2004-001540 100 mm 1 Set 24 Un.

Ref. 2004-001701 Star Brite 1 Pack 5 Un.

Ref. 2004-001700 2 Un.

15

Seal RepairWindscreen Adhesives and Bodywork Sealers

2

Seal Repair [Windscreen Adhesives and Bodywork Sealers]

16

Quick Seal Quick Seal Plus

One Step Glass Primer One Step Glass Primer

Cleaning Cloth Cleaning Cloth

Kit DG Quick Seal Kit DG Quick Seal Plus

Single-component polyurethane adhesive for direct windscreen gluing. Viscous sealer with dynamic drying. Polymerises whilst in contact with humidity. Apply with a manual or air extrusion gun.Skin forming time: 40 min. Delivery of vehicle without airbag: 2 hours. With airbag: 6 hours.

Ref. 5002-001062 Black Cartridge 310 ml 12 Un.

QUICK SEAL [Standard Windscreen Glue]

Polyurethane quick adhesive for direct windscreen gluing. Viscous sealant with dynamic drying.Skin forming time: 25 min. Delivery of vehicle without airbag: 1,5 hour. With airbag: 3 hours.


QUICK SEAL PLUS [Quick Windscreen Glue]

Quick single-component adhesive made of MS polymer, a next-generation product for direct windscreen gluing, with high thixotropic properties and dynamic drying. No need to use with Quick Primer Glass.

QUICK SEAL MS 974 [Windscreen MS Glue]


KIT DG QUICK SEAL / SEAL PLUS [Windscreen Glue Set]

Ref. 5002-001061 Kit DG Quick Seal Standard 6 Un.

Ref. 5002-001060 Kit DG Quick Seal Plus Fast 6 Un.


17

Black primer that forms a hard and opaque film once dry, improving its adhesion on polyurethane adhesives during gluing of glass, varnish and plastic (PVC, ABS, PMMA and SMC).

Ref. 5002-001110 Black Tube 24 Un.

ONE STEP GLASS PRIMER

Cotton swab for applying Quick Primer Glass and Activ Glass.

PRIMER [Applicator]

Ref. 2004-001160 100 Un.

Ref. 2003-002400 Wipe 12 Un.

Cleaning and degreasing wipe.

CLEANING CLOTH

Universal primer and activator for glass surfaces, ceramic screen printing and painted surfaces.

QUICK PRIMER AND ACTIV GLASS [Primer and Activator for Glass Surfaces]

Ref. 5002-001109 Primer 30 ml 12 Un.

Ref. 5002-001108 Activator 30 ml 12 Un.


18

Ecopolymeric multifunctional single-component sealer. VOC content: 0%. Does not turn yellow over time. Immediately overpaintable (wet on wet), does not get reduced after the application.

Ref. 5003-006032 966 White Cartridge 290 ml 12 Un.

Ref. 5003-006038 965 Black Cartridge 290 ml 12 Un.

QUICK MS ECO [Body MS Sealer]

Single-component bodywork sealer spray to be used on different metallic (steel, galvanised steel, stainless steel, tin), painted or primed surfaces and plas-tic materials elastic. Immediately overpaintable.

QUICK FLEX MS [Sprayable Sealer]

Ref. 5003-001043 Grey Cartridge 290 ml 12 Un.

Quick polyurethane single-component adhesive sealer. Used for joining, sealing and filling bodywork pieces. Overpaintable once dry. Can be sanded easily.

Two-components structural epoxy-based adhesive for sealing metals quickly. Recommended for the substitution of non-structural panels like roofs, doors, side panels, etc. Sticks on steel, galvanised steel and tin. Includes some glass pearls of 0,25mm that guarantees the bond line thickness. Provided with a mixing cannula. Apply with conventional sealing gun.

Drying at room temperature or accelerated drying through heat. • Pot life 60 min. • Working time 4 hours. • Total dry 24 hours at 23 ºC. • Resists to temperatures up to 230 °C. • Conductive welding before cure.


Ref. 5003-001052 White Cartridge 310 ml 12 Un.

Ref. 5003-001042 Grey Cartridge 310 ml 12 Un.


QUICK FILL [Bodywork Sealer]

QUICK METAL BONDING [Structural Epoxy Adhesive]


19

Auto-adhesive prefabricated butyl cord for sealing joints, headlights, stirrups, etc. Moisture protection and acoustic isolation.Thickness: 8 mm. Length: 4,5 m per roll.

Ref. 5003-000001 Black 1 Roll 8 Rolls

Hard nylon fibre brush especially designed for applying watertightness sealers and permitting to obtain a new perfect finish.

Ref. 2004-004030 10 Un.


Butyl filler for sealing and waterproofing. Can be used on joints, headlights, stirrups, etc.

Ref. 5003-001037 Grey Tin 1 kg 12 Un.

Single-component sealer for leak-free gaskets to be used with a brush. Fast drying. Overpaintable with any kind of paint system once totally dry.

BUTYL CORD

DOUBLE NYLON BRUSH

BUTYL FILLER

QUICK FILL BRUSH [Brush-Designed Sealer]


20

QUICK GLUE [Adhesive Spray]

LOGO TAPE [Sticking Strips]

Sprayable primer. Guarantees adhesion of the prefabricated PU cord and prevents corrosion.Prefabricated PU applicator. Allows the adherence and adaptation to the bodywork, ensuring its perfect positioning.

Prefabricated PU cord for door, boot and car bonnet sealing. Original finish guaranteed. Always use PU cords with a primer.

Ref. 2008-056290 Primer Colourless Spray 400 ml 6 Un.

Ref. 2008-056250 Roll 8 mm x 16 m 10 Rolls

Ref. 2008-056260 Roll 10 mm x 16 m 10 Rolls

PRIMER AND PU CORD APPLICATOR ROLLER

PREFABRICATED PU CORD

Adhesive spray to be used on fabric, felt, tapestry, rubber, plastic, vinyl, polystyrene foam, cardboard, paper as well as on carpets and rugs.

Sticking strips to recover logos and imprints. Once the anagram has been removed through Logo Tape before the repair, this one can be fixed again on the repaired surface as the adhesive part from the Logo Tape adheres on the anagram.

Ref. 5011-001077 Colourless Spray 400 ml 12 Un.

Ref. 2002-001980 50 mm x 300 mm 5 Packs Pack 10 Un.

Ref. 2008-056295 PU Cord Apllicator Roller 6 Un.

PU Cord Accessories


21

Pneumatic gun for cartridges or bags up to 310 ml of bodywork sealers and windscreen adhesives.

PNEUMATIC GUN CRS 4547

Ref. 1010-001188 1 Un.

Manual gun for cartridges or bags of bodywork sealers and windscreen adhesives.

MANUAL GUN CRS 2050

Ref. 1010-007522 1 Un.

Multifunctional pneumatic gun for sprayable sealers, cartridges and bags of windscreen adhesives.

MULTIFUNCTIONAL PNEUMATIC GUN CRS 2100

Ref. 1010-007524 1 Un.

23

Protect RepairAnti-Corrosive Protection

3

Protect Repair [Anti-Corrosive Protection]

24

Water-based stone chip protection. Protects the paint from the road gravel and prevents the corrosion. Its elastic and hermetic properties guarantee the required protection by vehicles manufacturer after any paint process.

Overpaintable textured stone chip protection. Perfectly protects and isolates the bodywork from the gravel. Its density permits to obtain very similar texture as originally. Anti-corrosive product, overpaintable, can be diluted.

Polymer stone chip protection in spray. Excellent structure and flexibility. Overpaintable with any painting system. Excellent protective and anti-corro-sion power. Provides several type of texture finish according to the distance and thickness of layer during the application.

HS stone chip protection made of two-component polyurethane, ideal for reinforcing bodywork sealing and protection. Can be used directly on metal, treated surfaces, paint or other reinforced resins. Overpaintable once dry with any system. Includes hardener.The cartridge allows to completely open the metallic lid so mixture between the product and its hardener is easier. Apply with stone chip standard gun or disposal lids (always clean).

Ref. 5008-001043 Black Tin 1000 ml 12 Un.

Ref. 5008-001044 Grey Tin 1000 ml 12 Un.


Ref. 5008-001053 Grey Tin 1000 ml 12 Un.

Ref. 5008-001054 White Tin 1000 ml 12 Un.

Ref. 5008-001055 Black Spray 500 ml 12 Un.

Ref. 5008-001058 Grey Spray 500 ml 12 Un.

Ref. 5008-001059 White Spray 500 ml 12 Un.

Ref. 5008-001038 Black Tin 750 g + 250 g 12 Un.

Ref. 5008-001039 Beige Tin 750 g + 250 g 12 Un.

STONE CHIP PROTECTION WB

QUICK SHIELD 2K PU + HARDENER [HS Stone Chip Protection - Hardener ]

STONE CHIP PROTECTION KS-2000

QUICK SHIELD POLYMER [Stone Chip Polymer Protection Spray]

Protect Repair [Anti-Corrosive Protection]

25

Gun for applying anti-gravel products and waxes, either water-based or acrylic.

Gun with a disposable tip, specifically designed for applying anti-gravel products. Disposable tips for applying two- and single-component anti-gravel products.

Cavity-protecting wax with anti-corrosive properties, especially indicated for inside door panels, headlights, bumpers, bonnets, boots, etc. Includes a new valve with 360º dispenser tube, to apply inside the cavities.

Flexible sheets that reduce vibrations and increase insulation.

Ref. 1009-007520 Gun 1 Un.

Ref. 1009-003090 Tip for 1000 ml 12 Un.

Ref. 1009-007521 Tip for QS 2K 12 Un.

Ref. 5008-001066 Transparent Tin 1000 ml 12 Un.

Ref. 5008-001036 Transparent Spray 500 ml 12 Un.

STONE CHIP STANDARD GUN

SOUNDPROOF SHEET

STONE CHIP QS 2K GUN

QUICK WAX [Cavity Wax]

Ref. 2005-006000 50 cm x 50 cm x 2 mm 10 Un.

Ref. 1009-007519 1 Un.

27

Plastic Repair

4

Plastic Repair

28

Ref. 1016-010001 1 Un.

Welding machine for plastic. Can fix any piece of car or motorbike bodywork (bumpers, aisles, headlights, footrests, grills, dashboards, mouldings, wheel arches, etc.). Easily and rapidly fixes, strengthens or redesigns any of these elements. Enables to fix without dismantling. Reduces work time and material costs. Three available intensities and three repair angles to permit an easy access to damaged area, even in hard-to-reach ones.

SP WELDING

Ref. 1016-010003 1 Un.

Cordless welding machine equipped with a nickel–metal hydride battery. Its design enables a more versatile, precise use and total freedom of movement. Led lid integrated between the two staple-holders electrodes for a better visibility of the repair area. Security system to avoid inadvertently switching on. Battery life: up to 600 staples.Three available repair angles to permit an easy access to damaged area, even in hard-to-reach ones.

SP WELDING POCKET

SP WELDING MOBILE

Ref. 1016-010004 1 Un.

Cordless welding machine powered by batteries AA. Its design allows a versatile, precise use and freedom of movement. Autonomy up to 100 staples with disposable batteries.

Ten compatible shapes of stainless staples for SP Welding Conventional, Mobile and Pocket.

Ref. 1016-010016 Staples SPW16 (Standard fine) 100 Un. / bag 1 Bag

Ref. 1016-010018 Staples SPW18 (Standard coarse) 100 Un. / bag 1 Bag

Ref. 1016-010026 Staples SPW26 (Fine reinforcement) 100 Un. / bag 1 Bag

Ref. 1016-010028 Staples SPW28 (Coarse reinforcement) 100 Un. / bag 1 Bag

Ref. 1016-010038 Staples SPW38 (Internal angles) 100 Un. / bag 1 Bag

Ref. 1016-010047 Staples SPW47 (External angles) 100 Un. / bag 1 Bag

Ref. 1016-010068 Staples SPW68 (Double internal angle) 100 Un. / bag 1 Bag

Ref. 1016-010078 Staples SPW78 (Double external angle) 100 Un. / bag 1 Bag

Ref. 1016-010088 Staples SPW88 (Adaptable) 100 Un. / bag 1 Bag

Ref. 1016-010099 Staples SPW99 (Strength / Smelting) 25 Un. / bag 1 Bag

STAPLES SPW

SPW47

SPW68 SPW78

SPW99

SPW16 SPW18

SPW26 SPW28

SPW38

SPW88

Plastic Repair

29

Two tubes of epoxy to be used for all types of plastic repair (including oleofinic types such as TPO, PP, XENOY and PPO). Easy to sand. VOC content: 0%.

Ref. 5006-006029 2 Tubes 2 x 250 g 3 Sets

Polyester filler with plastic fibre charges, designed especially for filling repairs on plastic surfaces. Flexible and extremely easy to sand.

Ref. 5006-001126 Dark Grey Tin 1.5 kg 12 Un.

Polyester filler with load of plastic fibre charges, especially designed for filling repairs on plastic areas. Flexible and very easy to sand. Low density.

Ref. 5006-001081 Dark Grey Tin 1 kg 6 Un.

FILL PLAS [Plastic Filler]

ADHESIVE FIBRE

FILL FLEX [Plastic Filler]

QUICK MIX 4013 [Universal Epoxy Plastic Repair]

Adhesive fibre roll to reinforce during repairs.

Ref. 5006-001098 50 mm x 20 m 10 Rolls

Plastic Repair

30

Application gun to be used with Quick Mix cartridges.

Ref. 1010-007525 50 ml Cartridges 1 Un.

Dynamic tip to be used with Quick Mix. Reduces the consumption of residual products.

Ref. 5006-001099 Mixing Tip for 50 ml Cartridge 10 Un.

Quick Mix Universal has been designed for quick repair and reinforcing of all plastics, including the most difficult to repair (PP, EPDM, TPO, XENOY, ABS, PPO, SAN, RRIM, HBA). It is 100% solid and provides excellent joining. Includes: 2 mixing tips and a heat resistant film to improve the repair. Once cut, reversing the cartridge closure converts it into a cap and a stopper.

Ref. 5006-001093 Cartridge 50 ml 12 Un.

Quick Mix Express is indicated in quick repairs where setting time is less than 50 seconds. Welds, repairs and refills. Includes: 2 mixing tips and a heat resistant film to improve the repair. Once cut, reversing the cartridge closure converts it into a cap and a stopper.

Ref. 5006-001096 Cartridge 50 ml 12 Un.

QUICK MIX UNIVERSEL [Universal Plastic Repair]

QUICK MIX GUN

QUICK MIX EXPRESS [Quick Plastic Repair]

QUICK MIX MIXING TIP

3’ 10’ 1h

40” 4’ 25’

Plastic Repair

31

QUICK TEX [Textured Paint]

TEXTURED ADHESIVE PLASTIC

QUICK TEX [Textured Paint Spray]

QUICK RCOLOR [Renewal Paint]

Single-component textured paint to paint bumpers and other plastic surfaces for a rough finish. Creates a thin protective shield. Overpaintable.


Ref. 5004-001050 Grey Tin 1000 ml 12 Un.

Single-component textured paint spray to paint bumpers and other plastic surfaces for a rough finish. Creates a thin protective shield. Overpaintable.



Plastic-based paint for vinyl and plastic repair. Completely covers stains on bumpers.


Ref. 5004-001048 Dark Grey Spray 400 ml 12 Un.

Auto-adhesive tape with a textured finish touch that imitates original finish on door frames of certain car models. Easy to lay.

Ref. 2001-001585 Roll 150 mm x 5 m 1 Un.

Plastic Repair

32

Water-based dye, especially designed for plastic surfaces and bumper moulding. Apply with sponge or Hitex 4000 cloth.

Ref. 5004-001083 Black Plastic Bottle 1000 ml 6 Un.

Ref. 5004-001085 Dark Grey Plastic Bottle 1000 ml 6 Un.

Transparent primer created especially to guarantee adhesion of any type of paint used on plastic surfaces.


Ref. 5004-001107 Colourless Tin 1000 ml 12 Un.

Mixture of different resin properties created to generate a chemical union on difficult plastic surfaces, enhancing adhesion during repair.


Renovating gel for renewal of outdoor plastics (bumpers, spoilers, mirror brackets, etc.) and rubbers. Non-stick, long-lasting action and silicone free.

Ref. 5005-001137 Transparent Blue Bottle 1000 ml 12 Un.

QUICK PLAST-GEL [Dye]

QUICK RSTORE [Plastic Renovator]

QUICK PLASTIC PRIMER [Transparent Plastic Primer]

QUICK ADHESION PROMOTER

Plastic Repair

33

Fast-drying liquid cyanoacrylate that generates chemical unions on most surfaces. When used together with Quick Cyan Activator, drying is guaranteed even at lower temperatures.

This product guarantees drying at low temperatures, even below 0ºC.

Ref. 5007-001088 Colourless Bottle 20 g 20 Un.


QUICK CYAN [Cyanoacrylate]

QUICK CYAN ACTIVATOR [Cyanoacrylate Activator]

35

Techno RepairTechnical Paints

5

Techno Repair [Technical Paints]

36

Two layers solvent based paint. Renault code: Pierre Fusil. Indicated to be used on car mouldings, body side mouldings, bumpers,… To be covered with an acrylic clear coat. Recommended clear coat: Quick Clear Lacquer-M 500 ml.

Ref. 5011-001054 Spray 400 ml 12 Un.

Nitro-based, plastified, single-component acrylic paint for surface repainting. Available in three finishes: matt, satin or gloss.

Ref. 5004-006023 Matt Black Tin 1000 ml 12 Un.

Ref. 5004-006024 Satin Black Tin 1000 ml 12 Un.

Ref. 5004-006039 Gloss Black Tin 1000 ml 12 Un.

Anti-heat paint for treating areas exposed to high temperatures. Silver: up to 360 ºC.Black: up to 600 ºC

Ref. 5011-001116 Silver Spray 400 ml 12 Un.


Universal nitrocellulose paint. Available in four finishes: matt, satin and gloss black and glossy white (RAL 9010).

Ref. 5011-006023 Matt Black Spray 500 ml 12 Un.

Ref. 5011-006024 Satin Black Spray 500 ml 12 Un.

Ref. 5011-006039 Gloss Black Spray 500 ml 12 Un.

Ref. 5011-006040 Gloss White Spray 500 ml 12 Un.

QUICK PIERRE FUSIL [Pierre Fusil Paint]

QUICK HEATPROOF [Heat-Resisting Paint]

QUICK RALLY BLACK [Black Paint]

QUICK RALLY BLACK AND WHITE [Spray Paint]

Techno Repair [Technical Paints]

37

ALUMINIUM WHEEL KIT

QUICK WHEEL SILVER [Alloy Spray]

CHROME EFFECT [Chrome paint]

QUICK WHEEL SILVER [Tin for Alloys]

Kit for repairing and painting alloy rims. Kit composed by an aluminium putty and six acrylic paint sprays in different grey tonalities (from the lighter and finer grey to the darker and thicker grey, including an anthracite grey). The kit contains a colour chart to choice the right colour and to apply directly, without mixtures. Includes also some masking cards for rims, a very resistant clear coat and its hardener to finish the repair.

Ref. 5014-001000 KIT 1 Un.

Ref. 5011-001000 Aluminium Paint Ultra Fine B01 Spray 400 ml 12 Un.

Ref. 5011-001001 Aluminium Paint Fine B02 Spray 400 ml 12 Un.

Ref. 5011-001002 Aluminium Paint Medium B03 Spray 400 ml 12 Un.

Ref. 5011-001003 Aluminium Paint Sparkling B04 Spray 400 ml 12 Un.

Ref. 5011-001004 Aluminium Paint Super Sparkling B05 Spray 400 ml 12 Un.

Ref. 5011-001005 Aluminium Paint Dark B06 Spray 400 ml 12 Un.

Ref. 5001-001000 Fill Metal + Hardener Tin 750 g 18 Un.

Ref. 5009-001005 Star Lack Thermo Ceramic Clear Coat Tin 1 l 12 Un.

Ref. 5009-001006 Star Lack Thermo Ceramic Hardener Tin 500 ml 24 Un.

Nitro-based, plastified, single-component acrylic paint for final retouching of surfaces.

Ref. 5004-001136 Grey Aluminium Tin 1000 ml 12 Un.

Acrylic, resin-based spray designed for painting alloys, metals and hard plas-tics. Fast drying.

Ref. 5011-001136 Grey Aluminium Spray 500 ml 12 Un.

Special chrome effect paint to apply in a three layers system. The paint has to be applied on a monolayer glossy black base. Once dry and without sanding. Depending on the number of layers and the equipment used different finishes effects can be obtained. It is recommended to apply a clear coat to ensure the durability and to make a previous test to evaluate the exact required finish.

Ref. 5004-006040 Chrome Tin 750 ml 6 Un.

39

High Efficiency SystemHigh Efficiency Products

6

High Efficiency System [High Efficiency Products]

40

HS Hardener HS for fillers and primers of High Efficiency range, wet on wet and Fast Dryign Filler.

Ref. 5009-001233 Tin 1 l 12 Un.

H.E. UNIVERSAL FILLER HARDERNER

Extremely high solid filler characterized by a high filling level and a very fast drying time with no need of heat. Dry in 2 hours at 20ºC or 15 minutes at 60ºC. Can be used as primer or filler according to the thinner mixing proportions. Mixing proportion 4:1.

Ref. 5009-001230 Light Grey Tin 3.6 l 4 Un.

Ref. 5009-001231 Dark Grey Tin 3.6 l 4 Un.

H.E. FILLER FAST DRYING

4: 1 120-250 µ 120’

Ultra-light filler with high capacity of shock absorption. Thanks to its extreme flexibility it absorbs very well the twists of auto body. It adheres on galvanized steel, aluminium and other steels. Indicated specially for flexible panels or any other panel.

Ref. 5001-001001 Beige Tin 1 kg 12 Un.

H.E. FILL ULTRAFLEXIBLE SOFT [Ligh Beige Filler]

2K acrylic primer for car repaint system professional use. Overpaintable 15 min-utes after its application and on any other system. Specially developed for new panels of cataphoresis not sanded, insulation and sealants of repaired areas. Soft and satin finish that allows to detect defects and impurities before paint-ing. Excellent adherence on cataphoresis, steel, galvanized steel, electro-gal-vanized and aluminium duly degreased. Plastic elements PUR, NORYL, PA, PC, PVC, PP-EPDM, MA, SMC, ABS. Mixing proportion 4:1.

Ref. 5009-001232 Medium Grey Tin 1 l 12 Un.

H.E. FILLER WET ON WET

4: 1 50 µ 20’

3-5’ 25’ P150-320

High Efficiency System [High Efficiency Products]

41


Ref. 5009-001120 Clear Coat Tin 1 l 12 Un.

Ref. 5009-001121 Standard Tin 500 ml 12 Un.

Ref. 5009-001122 Fast Tin 500 ml 12 Un.

Ref. 5009-001123 Slow Tin 500 ml 12 Un.

H.E. WASH PRIMER [Quick primer spray]

H.E. STAR LACK FAST DRYING 2:1

H.E. STAR LACK FAST DRYING HARDENER

Primer/adherence promoter applied directly on bare metals such as steel, zinc and aluminium. Quick dry, repaintable damp upon damp after evapora-tion with any system. Excellent corrosion-resistant properties before the use of any filler.

Clear coat of Air Dry technology without external heat requirement. Hardens easily at room temperatures (20º-23ºC) within two hours. Very fast curing pro-cess when using heat: 15 minutes at 60°C. Available with a range of hardeners that allow the repair of surfaces of any size. Strictly reduces energy costs. Excel-lent finish and easy to apply. Mixing proportion 2:1.

2: 1 1+1 120’

43

Filler, Clear Coat & Matt Finishing RepairFiller, Clear Coat, Matt Finish, Thinner, Degreasers

7

Filler, Clear Coat & Matt Finishing Repair [Fillers]

44

Next-generation filler, created especially for an easy application and sanding. Available in two shades of grey, light and dark. High density filler specially devel-oped to achieve a better finish in car bodywork repair. Better application and sanding. Providing a satin effect once dry. Both light and dark grey colours can be mixed to obtain various grey colour schemes. Mixing proportions 5:1.

Ref. 5009-001220 Light Grey Tin 4 l 4 Un.

Ref. 5009-001221 Dark Grey Tin 4 l 4 Un.

Ref. 5009-001218 White Tin 4 l 4 Un.

Ref. 5009-001219 Black Tin 4 l 4 Un.

EASY FILLER HARDENERRef. 5009-001222 Standard >25 ºC 800 ml 6 Un.

Ref. 5009-001223 Extra fast <25 ºC 800 ml 6 Un.

EASY FILLER 4000

5: 1 150-240 µ 3-5 h

Extremely thick filler. Fast drying and easy to sand. Available in three colours: pure white, grey and black. With the option to mix them to obtain different shades of grey. Can be used with an accelerator to achieve even faster drying. Mixing proportions 4:1.

Ref. 5009-001146 White Tin 3.6 l 4 Un.

Ref. 5009-001147 Grey Tin 3.6 l 4 Un.

Ref. 5009-001150 Black Tin 3.6 l 4 Un.

HS FILLER HARDENER Ref. 5009-001154 541 Extra fast Tin 900 ml 12 Un.

Ref. 5009-001159 541 Standard Tin 900 ml 12 Un.

FILLER AND SURFACER HS 540

4: 1 150-300 µ 4-8 h

Extremely thick filler provided with its extra fast hardener. Fast drying and easy to sand. Available in three colours: pure white, grey and black. With the option to mix them to obtain different shades of grey. Can be used with an accelerator to achieve even faster drying.Mixing proportion 4:1.

Ref. 5009-001160 Grey Tin 1 l + 250 ml 12 Un.

Ref. 5009-001161 Black Tin 1 l + 250 ml 12 Un.

Ref. 5009-001163 White Tin 1 l + 250 ml 12 Un.

FILLER AND SURFACER HS 540 + HARDENER

4: 1 150-300 µ 4-8 h

Filler, Clear Coat & Matt Finishing Repair [Fillers]

45

Quick spray with enhanced filling properties. Fast drying and easy to sand. Applied directly to metals, fillers or properly sanded and worn-out painted areas. Compatible with all repainting systems.

Ref. 5011-001068 Light Grey Spray 500 ml 12 Un.

Ref. 5011-001069 Dark Grey Spray 500 ml 12 Un.

Ref. 5011-001070 White Spray 500 ml 12 Un.

Flexible High Solid filler to be used on metal, wood and plastic. Enhanced filling properties. Can also be used as adhesive base.

Ref. 5011-001056 Dark grey Spray 500 ml 12 Un.

Ref. 5011-001057 Medium grey Spray 500 ml 12 Un.

Ref. 5011-001058 Light grey Spray 500 ml 12 Un.

Semi-glossy, epoxy-based zinc spray to be used on metals. High zinc content (90,5 % once dry). Excellent anti-corrosive properties.

Ref. 5011-001073 Spray 400 ml 12 Un.

Silver-coloured, satin paint that provides great anti-corrosive protection for metals, thanks to its high pure zinc VOC content and its aluminium pigments.

Ref. 5011-001075 Spray 400 ml 12 Un.

QUICK 1K HIGH BUILDER [Quick Filler Spray]

QUICK ZINC-ALU [Zinc-Aluminium Primer ]

QUICK BODYPRIMER HS [High Solid Filler Spray]

QUICK ZINC [Zinc Primer]

Filler, Clear Coat & Matt Finishing Repair [Clear Coats]

46

Next-generation UHS clear coat to be used for repainting car bodies partially or completely. Easy to apply requires no dilution although it can be used to adjust the viscosity at low temperatures. Excellent finish. Can be used in any repaint procedure thanks to its versatility and the range of its hardeners. Mixing proportion 2:1.

Ref. 5009-001110 Tin 5 l 4 Un.

Ref. 5009-001116 Tin 1 l 12 Un.

STAR LACK CLEAR COAT UHS 4000

2: 1 ½+1 5-6 h

STAR LACK HARDENER UHS Y HS

Ref. 5009-001111 1000 Fast 2.5 l 4 Un.

Ref. 5009-001112 2000 Standard 2.5 l 4 Un.

Ref. 5009-001113 3000 Slow 2.5 l 4 Un.

Ref. 5009-001117 2000 Standard 0.5 l 6 Un.

Ref. 5009-001118 1000 Fast 0.5 l 6 Un.

Hardeners for UHS 4000 clear coat and HS 4050 PLUS anti-scratch clear coat.

STAR LACK CLEAR COAT HS 4050 PLUS

2: 1 1+1 3-4 h

HS clear coat with anti-scratch properties. Fast drying. Produces a highly effective finish. Easy to apply. Does not require thinner. There is a large range of compatible hardeners for this product.Mixing proportion 2:1.

Ref. 5009-001022 Tin 5 l 4 Un.

Ref. 5009-001021 Tin 1 l 12 Un.

Next-generation HS clear coat with a high solid content that creates a strong gloss effect. Perfect for any type of repair: does not wear away. There is a large range of compatible hardeners for this product. Mixing proportions 2:1.

Ref. 5009-001195 Tin 5 l 4 Un.

STAR LACK HARDENER HS LVC

STAR LACK CLEAR COAT HS LVC 4020

2: 1 1+1 5-6 h

Ref. 5009-001197 1020 Fast 2.5 l 4 Un.

Ref. 5009-001198 1030 Standard 2.5 l 4 Un.

Ref. 5009-001199 1040 Slow 2.5 l 4 Un.

Filler, Clear Coat & Matt Finishing Repair [Clear Coats]

47

1: 1 1+1 90’

Last generation clear coat with air drying technology, with no need to use heat drying systems altough the products allows it perfectly. Especially developed for all kind of painting works, including flat parts such as roofs, hoods, complete sides. Allows to paint one part after another thanks to its spraying acceptance time of a standard clear coat. A 20 ºC: Operable in: 40 minutes / Imperfection cutting - polishing: 90 minutes / Total dry - Overpaintable: 4 hours.

Ref. 5009-001114 Clear Coat Tin 2.5 l 4 Un.

Ref. 5009-001115 Hardener Tin 2.5 l 4 Un.

STAR LACK EXPRESS

MATTING ADDITIVE CRS

Matting additive agent disolved in acrylic resin. Specially designed to obtain a wide range of matt finishing effects for 2K finishing products such as clear coats and paints.Refer to the mixing recommendations chart of CRS clear coats.

Ref. 5009-001306 Tin 1 l 6 Un.

QUICK SPOTBLENDER [Thinner for Blenders]

Mixture of high-quality thinners to be used for paint blending during repairs. Fine mist spray. To be used with an application gun or directly with the spray.

Ref. 5011-001155 Spray 400 ml 12 Un.

Ref. 5011-001156 Bottle 1000 ml 12 Un.

STARMATE [Matt Clear Coat]

Two-component acrylic clear coat for two-layer matt finish systems. Fast drying and even finish. Mixing proportion 5:1.

Ref. 5009-001300 Clear Coat 1 l 12 Un.

STARMATE HARDENERRef. 5009-001301 Standard 500 ml 6 Un.

Ref. 5009-001302 Fast 500 ml 6 Un.

5: 1 1+1 4h

Filler, Clear Coat & Matt Finishing Repair [Special Finishes]

48

Kit including a high resistant clear coat with its hardener and an additive espe-cially suitable for UV light-protection. This additive protects the polycarbonate panels after repair.

Ref. 5006-001101 Kit 1 Un.

Set for repairing and recovering polycarbonate screens, used for car, industrial vehicle and motorcycle headlight production. Comes with different sanding grains for rectifying minor superficial damage and restoring worn-out surfac-es. Includes a two-component polyester with anti-shock effect to protect the screen after repair.

Ref. 3001-005003 Kit 1 Un.

Monocomponent acrylic clear coat spray with a new formula last generation product. General use for two layers based-water or solvent paints process. High quality resin that guarantees a high level repair. Gloss, satin or matt finish.

Ref. 5011-006021 Colourless Gloss 500 ml 12 Un.

Ref. 5011-006020 Colourless Satin 500 ml 12 Un.

Ref. 5011-006019 Colourless Matt 500 ml 12 Un.

HEADLIGHTS KIT

QUICK CLEAR LACQUER [Acrylic Clear Coat Spray]

HEADLIGHTS REPAIR KIT

Two-component polyester with anti-scratch effect to protect polycarbonate surfac-es. Creates a shield over the windscreen. Protects from gravel and insects. Guaran-tees clear visibility. Extra-fast hardener. Mixing proportion 2:1.

Ref. 5009-001001 Polyester Tin 1 l 6 Un.

Ref. 5009-001002 Hardener Tin 500 ml 6 Un.

STARLIGHT [Polyester for Polycarbonates]

2: 1 ½+1 90’

Filler, Clear Coat & Matt Finishing Repair [Thinners and Degreasers]

49

IONISER WB

ACELERATOR FOR ACRYLICS

DEGREASER CARS

QUICK HYDROCLEANER [Water-Based Degreaser]

Thinner for water-based paint. It is a solution ionised with magnetic charges so that when in contact with paint, positive charges are transferred to the mixture, obtaining a higher paint transfer to the surface being painted. Considerably re-duces drying time and prevents stains and streaks from appearing. Compatible with all water-based systems that admit thinning.

Ref. 5009-001190 Bottle 1 l 14 Un.

Ref. 5009-001189 Cylinder 5 l 4 Un.

Accelerating additive for paints, fillers and primers. Reduces drying time.

Ref. 5009-001155 Colourless Tin 1000 ml 12 Un.

Degreaser with intense cleansing power. Removes wax and silicone surplus.

Ref. 5009-001144 9410 Slow Tin 1 l 12 Un.

Ref. 5009-001145 9410 Slow Tin 5 l 4 Un.

Ref. 5009-001033 0467 Fast Tin 1 l 12 Un.

Ref. 5009-001025 0467 Fast Tin 5 l 4 Un.

THINNER UNIVERSAL CARS

Acrylic thinner for paints, clear coat and acrylic fillers.

Ref. 5009-001018 Slow Tin 1 l 12 Un.

Ref. 5009-001016 Slow Tin 5 l 4 Un.

Ref. 5009-001019 Standard Tin 1 l 12 Un.

Ref. 5009-001020 Standard Tin 5 l 4 Un.

Water-based cleansing degreasers for cleaning the surface before painting with hydrosoluble products. It is recommended to use together with Hitex 4000.


Filler, Clear Coat & Matt Finishing Repair [Application Equipment and Accessories]

50

TechnologyAir consumptionWorking pressureAir entryDeposit capacityTransfer rateOpening width

MP (Medium-low pressure)300l/m 2.5 bar / 36 PSI¼ 600 ml 240-280 mm. 1.3 mm

Ref. 1001-000001 Gun HVLP 1.3 mm 1 Un.

Ref. 1001-000002 Gun MP 1.3 mm 1 Un.

Ref. 1002-000002 PVC Cup 600 ml 1 Un.

Ref. 1002-000004 Projection kit HVLP 1.2 mm 1 Un.

Ref. 1002-000005 Projection kit HVLP 1.3 mm 1 Un.

Ref. 1002-000006 Projection kit MP 1.2 mm 1 Un.

Ref. 1002-000007 Projection kit MP 1.3 mm 1 Un.

CRS-PRO 2017 HVLP 1.3 GUN & PROJECTION KIT 1.2 CRS-PRO 2017 MP 1.3 GUN & PROJECTION KIT 1.2

Professional gravity guns with painting technology M.P. (medium pressure) and HVLP for any base application or ended, that combines the conventional atomization and system H.V.L.P. Ergonomically designed free of joints of rub-ber, anodized finish, and aluminum chassis. Peak and needle in stainless steel.

HVLP 400l/m 2.0 bar / 29 PSI¼ 600 ml 200-240 mm1.3 mm

TechnologyAir consumptionWorking pressureAir entryDeposit capacityTransfer rateOpening width

MP (Medium-low pressure)200l/m1/5 bar ¼ 100 ml 140 -180 mm 1.0 mm

Ref. 1001-000004 Gun 1.0 mm 1 Un.

Ref. 1002-000003 Antidrip PVC Cup 300 ml 1 Un.

Ref. 1002-000009 Projection kit 0.8 mm 1 Un.


TOUCH GUN CRS-PRO MINI 2017 1.0

Mini gravity spray gun for small painting areas or smart repair.

TechnologyAir consumptionWorking pressureAir entryDeposit capacityTransfer rateOpening width Opening width

MP (Medium-low pressure) 300 l/m 2.5 bar / 36 PSI ¼ 600 ml 240 – 280 mm 1.7 mm / Filler2.5 mm / Polyester filling

Ref. 1001-000003 Gun 1.7 mm 1 Un.

Ref. 1002-000002 PVC Cup 600 ml 1 Un.



Professional gravity spray guns with MP (medium pressure) and HVLP spraying technology to cover any base or finish application. Combines the conventional atomization with the HVLP system. Ergonomic design, free of rubber seals, anodised finish and aluminium chassis. Fluid tips and needles in stainless steel.

CRS-PRO MP 1.7 GUN FOR FILLER

Filler, Clear Coat & Matt Finishing Repair [Application Equipment and Accessories]

51

DUST REMOVAL NEEDLES

SPRAY GUN CLEANER [Gun Cleaner]

Equipment cleaning

SPRAY GUN CLEANER KIT

Stand-alone, flexible steel needles with a microscopic tip for removing dust particles, hairs, insects or other objects from fresh paint.

Ref. 2004-001240 Set 6 needles 1 Set

Ref. 2004-001770 Kit 10 needles + Pen 1 Kit

AIR REGULATOR CRS

Analog air pressure regulator for painting guns. InclUn.es a new pressure indicating manometer more compact and resistant, as well as a forged aluminum body. Its new fixing system enables to fix the regulator to the gun without the need of any tools.

Ref. 1002-007102 1 Un.

MAGNETIC GUN BRACKET

Magnetic bracket for two gravity guns. Provides a reliable fix on metals.

Ref. 2004-003000 1 Un.

Water-based soap for cleaning guns, application equipment and water-based clear coats. Spray directly on paint residue, even dry ones, the soap will dis-solve them easily without damaging the equipment.

Ref. 5012-001000 Cylinder 25 l 1 Un.


Gun cleaner set made of different-sized brushes.

Ref. 2004-003020 Kit 5 Kits

Filler, Clear Coat & Matt Finishing Repair [Pre-Paint Cleaning]

52

Pressurised pulveriser with a safety valve and gaskets that resist different chemical products, inclUn.ing acids, solvents and alkalines. Fan-shaped spraying head that can be tilted vertically as well as horizontally. Maximum application pressure allowed by the valve: 2 bar (29 psi).

Ref. 2004-000002 Spray bottle 1 l 5 Un.

Cleaning and degreasing cloth for painting process. Its structure is composed by inserted polypropylene making the cloth more adaptable and elastic. Excellent absorption. Useful roll of 500 precut 320 x 380 mm cloths.

Ref. 2003-001040 Blue 32 cm x 38 cm 1 Roll 500 Un.

Ref. 2003-001050 Blue 38 cm x 30 cm 150 Un.

Degreasing cloth made of a non-woven fabric. Especially resistant to thinners, degreasers and anti-silicone products. Strong absorption power and resistance.

Ref. 2003-002550 Blue 32 cm x 40 cm 6 Boxes 50 Un.

Anti-dust cloth for cleaning surfaces to be painted with water-based paint. Does not leave resin. Porous fabric designed to trap dust. Comes in individual bags.

Ref. 2003-001030 White 50 cm x 75 cm 6 Boxes 50 Un.

White anti-dust cloth. Does not leave resin nor fibre marks. Comes in individual bags.

Ref. 2004-000001 Dispenser for Paper rolls and Polytex 1 Un.

PRESSURISED PULVERISER

TACK RAG SPECIAL WATER-BASED PAINT [Anti-Dust cloth]

TACK RAG [Anti-Dust cloth]

POLYTEX CRS [Degreaser Cloth]

HITEX 4000 [Non-woven degreasing cloth]

Filler, Clear Coat & Matt Finishing Repair [Pre-Paint Cleaning]

53

Transparent water-based emulsion for protection of painting cabins. Creates an adhesive layer on which dust and paint spray can stick. Biodegradable.


Transparent water-based emulsion for protection of painting cabins. Creates a peel-off adhesive layer (peel-off clear coat) to protect windows and walls from sprays. Easily removed by pulling, blowing or wetting.


Special liquid product designed for reducing dust particles in the cabin atmosphere. Easy to apply by spraying the floor with a normal gun. Ionises all dust particles for a period of 1 to 2 weeks.


QUICK GEL CABIN [Protective gel]

QUICK PRO-PEEL CABIN [Protective Film]

QUICK DUST CABIN [Dust Ioniser]

55

Paint Preparation System

8


56

Ref. 2012-001421 Cup + lid 500 ml 100 Un.

Ref. 2012-001422 Cup + lid 1 l 100 Un.

Ref. 2012-001423 Cup + lid 1.8 l 100 Un.

Opaque cup for preparing paint according to weight, and for conserving it. Light resistant. Ensures a safe transport.

For any other models please request availability.

PAINT PLASTIC CUP AND LID

Ref. 2012-001420 Cup 385 ml 200 Un.

Ref. 2012-001440 Cup 750 ml 200 Un.

Ref. 2012-001500 Cup 1400 ml 200 Un.

Ref. 2012-001520 Cup 2300 ml 100 Un.

Ref. 2012-001430 Lid 385 ml 200 Un.

Ref. 2012-001450 Lid 750 ml 200 Un.

Ref. 2012-001510 Lid 1400 ml 200 Un.

Ref. 2012-001530 Lid 2300 ml 200 Un.

Disposable mixing cups for precise preparation of all types of paint. Air-tight seal. Available mixing scales: 1:1, 2:1, 3:1, 4:1, 5:1, 6:1 and 7:1. Each scale includes the unit of measure in ml and the percentage of dilution.

MIXING CUPS & LIDS

KIT CAR REFINISH SYSTEM 600 ML

Ref. 2012-001541 Kit 125 µ 45 Un.

Ref. 2012-001542 Kit 190 µ 45 Un.

Kit composed by 45 flexible cups, 45 lids with filter, 2 rigid cups and 10 caps. Al-lows to mix the paint directly into the cup saving time and costs and reducing the environmental impact. Fill in the flexible cup, remove the excess of air turn-ing the gun upside down and spray with a perfect paint flow from any position and any angle. The excess of paint can be stored in the same flexible cup by closing this cup with a hermetic cap which, at the same time, keeps the filter submerged so it does not get dry.

ADAPTORS CAR REFINISH SYSTEM

Ref. 2012-001543 A CRS 007, SATA, IWATA 1 Un.

Ref. 2012-001544 B IWATA WS, SNOVA, AEROMETAL 1 Un.

Ref. 2012-001545 C DEVILBISS 1 Un.

Ref. 2012-001546 E SATA/KREMLIN 1 Un.

Ref. 2012-001552 G SATA MINI 1 Un.

Ref. 2012-001550 N MINI SAGOLA 4400 1 Un.

Ref. 2012-001549 QCC QCC - SATA 1 Un.

Ref. 2012-001551 L SAGOLA 4400, 4500, 4600 1 Un.

Ref. 2012-001553 D WALCOM 1 Un.


57

Ref. 2012-002390 Cup 600 ml 200 Un.

Disposable paper mixing cup.

PAPER MIXING CUP

PAPER PAINT STRAINERS

Disposable paper strainers for paint, with a nylon mesh.

Ref. 2006-070103 190 Microns 1 Box 1000 Un.

Ref. 2006-070104 125 Microns 1 Box 1000 Un.

PLASTIC PAINT STRAINERS

Washable and reusable plastic strainers for paint, with a nylon mesh.

Ref. 2006-002590 Mesh 2000 Water-based paints 25 Un.

Ref. 2006-001060 Mesh 5000 - 25 Un.

Ref. 2006-001070 Mesh 10000 - 25 Un.

MIXING RULER CRS

Mixing ruler for HS Filler 4:1 and Star Lack LVC 2:1.

Ref. 2012-001334 5 Un.


58

Disposable mixing sticks for paint.

Ref. 2012-001333 20 cm 4 Boxes 500 Un.

Disposable brushes with a flexible tip for precision retouching work. Securely capped to guarantee hygiene.

Ref. 1008-002000 Dispenser 4 Boxes 100 Un.

Paint brushes for retouching. Available in different sizes.

Ref. 2004-004040 Paint brush Nº 0 12 Un.









Bottle for paint samples: 60 ml.

Ref. 2004-007025 Bottle with paint brush 60 ml 1 Box 50 Un.

MINI BOTTLE FOR PAINT SAMPLE

DISPOSABLE MIXING STIRRERS CRS

MICROBRUSH REGULAR BLUE [Disposable Brushes]

OX-EAR HAIR PAINT BRUSHES


59

METALIC SUCTION FILTER

GRAVITY FILTER

UNIVERSAL SUCTION FILTER

PLATES FOR PAINT SAMPLES

Filter for paint gravity gun

Ref. 2006-001050 1 Box 12 Un.

Metallic suction filter.

Ref. 2006-002290 1 Box 12 Un.

Metallic plate (105 mm x 150 mm) with a black middle band for paint samples.

Ref. 2004-001690 1 Bag 200 Un.

Filter for universal suction gun.

Ref. 2006-001040 Medium filter 1 Box 10 Un.

61

Compounding RepairVehicle Polishing, Buffering and Protection

9

Compounding Repair [Vehicle Polishing, Buffering and Protection]

62

MINI SANDING BLOCK

Mini sanding block of 35-mm diameter for adhesive discs or Velcro discs.

Ref. 2007-002190 35 mm 1 Pack 5 Un.

PAINT RUN REMOVER

Ref. 2004-085840 1 Un.

Entirely redesigned blade made of a special material, used to cut off and remove drops, runs and specks from painted surfaces.

SKYFILM DISC

Abrasive discs on latex backing specially developed for defects rectification of painted surfaces. Provides a very smooth and homogenous nuanced result. Its special coating prevents from clogging while sanding relatively fresh clear coats. Standard vacuum system with 15 holes for 150 mm diameter discs and with-out holes for 35 mm and 75 mm diameter discs. Discs of 150 mm diameter are available in 100 units’box. 35 mm and 75 mm discs are available in 50 units’box.Sales unit: 12 Boxes for 75 mm and 150 mm discs.Sales unit: 1 Box for 35 mm discs.

Ref. 2014-006186 150 mm P1200 1 Box 50 Un.

Ref. 2014-006187 150 mm P1500 1 Box 50 Un.

Ref. 2014-006188 150 mm P2000 1 Box 50 Un.

Ref. 2014-006189 75 mm P1200 1 Box 50 Un.

Ref. 2014-006190 75 mm P1500 1 Box 50 Un.

Ref. 2014-006191 75 mm P2000 1 Box 50 Un.

Ref. 2014-006192 35 mm P2000 1 Box 100 Un.

Ref. 2014-006193 35 mm P3000 1 Box 100 Un.

F1 SKYLON + DISC

Foam disc and abrasive fabric that provides a smooth backing on the working surface. Allows the sanding residues to pass through its composition. Can be used in dry or wet sanding system. Highly recommended on bent surfaces.Discs of 150 mm are available in 10 units’box. Discs of 75 mm are available in 20 units’box. Sales unit: 8 Boxes for 150 mm and 75 mm.

Ref. 2014-006031 150 mm P2000 1 Box 10 Un.

Ref. 2014-006032 150 mm P3000 1 Box 10 Un.

Ref. 2014-006033 75 mm P2000 1 Box 20 Un.

Ref. 2014-006034 75 mm P3000 1 Box 20 Un.


63

Ref. 5010-000001 1 kg 1 Box 6 Un.

Fast cut polishing compound especially indicated for new generation clear coats and finishes. Used with the Diamond 1500 pad, its chemical property as emulsion permits to obtain a perfect cut and high gloss finish in one step. Removes easily any sanding marks from grit 1500. Provides a deep brightness.

Ref. 2004-000101 Wool pad Orange 1 Box 6 Un.

DIAMOND 1500

Ref. 2004-000102 Foam pad Yellow 1 Box 6 Un.

Ref. 5010-000002 1 kg 1 Box 6 Un.

Medium cut polishing compound indicated to restore paints losing their original gloss, not completely cured clear coats or to remove sanding marks from grit 2500. Recommended to be used with the Quartz 2500 pad for a professional result.

QUARTZ 2500

Ref. 2004-000103 Foam pad Black 1 Box 6 Un.

Ref. 5010-000003 1 l 1 Box 6 Un.

High gloss polishing compound providing a lasting finish with any car body polishing process. Application by hand or machine. Recommended to be used with the Crystal 4000 pad.

CRYSTAL 4000

ECLIPSE

Ref. 5010-000004 1 l 1 Box 6 Un.

Perfumed protective wax that seals and protects recent polished or painted surfaces. Seals the surface avoiding dust, water or any other contaminants deposit that could prematurely wear out the gloss. Can be used on the whole car body, glasses, painted plastics. Recommended to be applied by hand with our Yellow Microfibre Cloth CRS.

1200 a 1800 rpm

1200 a 1800 rpm

1200 a 1500 rpm


64

Ref. 2004-007000 White 6” 12 Un.

Ref. 2004-007003 Kit 1 Un.

White polishing pad. Hook & Loop system, that ensures the correct centring of plate and isolate it from possible friction by contact.

Polishing kit composed by one white polishing pad, one black buffing pad, one polisher M14 14 mm plate and one microfiber cloth.

Ref. 2004-007001 Black 6” 12 Un.

Black buffing pad. Hook & Loop System, that ensures the correct centring of plate and isolate it from possible friction by contact.

Ref. 2004-007002 Black 14 mm 6” 12 Un.

Plate recommended for the use of polishing and buffing pads. Hook & Loop System, that ensures the correct centring of plate and isolate it from possible friction by contact.

See Family Electric & Pneumatic Tools page 108

APPLICATION KIT CRS 6”

CARS POLISHER PLATE

CARS POLISHING PAD

CARS BUFFING PAD


65

Ref. 5010-001124 Sprayer 1 l 16 Un.


Polish spray for fresh or just-polished paints. Gets rid of polish residues while providing long-lasting protection, so producing a thorough and long-lasting wet-look effect. It is recommended to apply by hand with a microfibre cloth.

QUICK POLISH MOON [Protective Wax]

75 MM FLEXIBLE POLISHER PLATE

Ref. 2004-000004 1 Pack 2 Un.

Plate for electric polisher equipped with a M14 thread. Includes a flexible interface. Velcro system. Specially indicated for 3” or 75 mm diameter polishing pads.

KIT OF 3 EXTENSIONS FOR POLISHERS

Ref. 2004-000005 Kit 1 Un.

Kit of 3 extensions made of aluminium equipped with M14 male and female threads. Extensions of 50, 80 and 120 mm long. Ideal for reaching difficult access areas such as spoilers, rear-view mirrors, optical parts of the headlamp. Compatible with any diameter of plate equipped with a M14 metric.

Ref. 8010-000001 1 Un.

One side, microfiber mitt and the other side, rubber mitt coated with high technology polymer for eliminating contaminants during the car wash. Suitable for eliminating contaminants before painting, polishing or waxing.

CRS DECONTAMINATION MITT


66

Ref. 2003-007029 40 cm x 40 cm 1 Box 10 Un.

Microfibre cloth with multiple uses: cleaning, polishing and absorption.Seams are protected so as not to leave streaks. Useful for manual application of polishes. It is the most recommended option for final cleaning of polished surfaces. Washable and long lasting.

Ref. 2004-002670 1 Un.

Specific tool for drying all types of surfaces. Save time in auto drying thanks to its flexible silicone blade that adapts to any surface.

MICROFIBRE CLOTH

HYDRA FLEXI BLADE [Surface Drying Tool]

SOFTEX [Polishing and Buffering Cloth]

CELLULOSE SPONGE

Ref. 2003-001010 28 cm x 40 cm 1 Roll 250 Un.

Special non-woven cloth for polishing and buffering. Strong absorption power and very soft. Does not leave dust. Antistatic.

Ref. 2004-002770 135 mm x 30 mm x 95 mm 10 Un.

Sponge manufactured from vegetable extracts. 100 % biodegradable.

69

Car CareCar Cleaning, Care and Protection

10

Car Care [Car Cleaning, Care and Protection]

70

Ref. 8010-000002 Bottle 250 ml 1 Box 6 Un.

Moisturizing cream suitable for natural leather or synthetic vinyl. Deeply nourishes the dry and dehydrated leather to be restored to its original ap-pearance.

Ref. 8010-000004 Sprayer 250 ml 1 Box 12 Un.

Regenerating compound for any plastic surface. Nourishes and renews the aged plastics.

Ref. 8010-000005 Tube 75 ml 1 Box 12 Un.

Plastic cleaner especially indicated for interior plastic surfaces. Removes dirt buildup and glass enhancer rests having formed with time a superficial film, which avoids the inside of the car to keep a clean appearance.

LEATHER CARE

PLASTIC CLEANER

Ref. 8010-000003 Tube 75 ml 1 Box 12 Un.

Active cleaner for aged or damaged leather. Removes dirt buildup and slight-ly polishes the worn surface. Must be used with Leather Care for surface rehy-drating and to complete the treatment.

LEATHER CLEANER

PLASTIC CARE

Car Care [Car Cleaning, Care and Protection]

71

METAL POLISH LIQUID

TIRE SHINE

INSECT REMOVER EXTRA STRONG

GLASS CLEANER EXTRA STRONG

WHEEL CLEANER EXTRA STRONG

Ref. 8010-000006 Bottle 250 ml 1 Box 12 Un.

Liquid polishing compound for cleaning and removing dirt and pollutants over metallic or stainless surfaces.


Liquid cleaning and descaling compound for glass. Easily removes resins and insects remainders.


Detergent to remove brake pads residues, oils and others pollutants from the rims and car underside. High descaling formula.


Tire shine that gives a long lasting shine without grease buildup.


Detergent to eliminate insect remainders, resins and other pollutants from car bodywork. High descaling formula.

Car Care [Required complements for its application]

72

Ref. 8010-000001 1 Un.

Ref. 2003-007029 40 cm x 40 cm 1 Box 10 Un.

Ref. 2003-001010 28 cm x 40 cm 1 Roll 250 Un.

Ref. 2004-002670 1 Un.

CRS DECONTAMINATION MITT

MICROFIBRE CLOTH

SOFTEX [Polishing and Buffering Cloth]

HYDRA FLEXI BLADE [Surface Drying Tool]

One side, microfiber mitt and the other side, rubber mitt coated with high technology polymer for eliminating contaminants during the car wash. Suitable for eliminating contaminants before painting, polishing or waxing.

Microfibre cloth with multiple uses: cleaning, polishing and absorption.Seams are protected so as not to leave streaks. Useful for manual application of polishes. It is the most recommended option for final cleaning of polished surfaces. Washable and long lasting.

Special non-woven cloth for polishing and buffering. Strong absorption power and very soft. Does not leave dust. Antistatic.

Specific tool for drying all types of surfaces. Save time in auto drying thanks to its flexible silicone blade that adapts to any surface.

75

Masking System & Protection

11


76

Plastic film with double protection. Inside sticks electrostatically to the surface to protect. Resists temperatures of up to 120ºC. Designed for painting with any paint system.

Waterproof 25 mm masking tape that does not leave glue residue.

Ref. 2001-003525 35 cm x 25 m 20 Un.

Ref. 2001-006025 60 cm x 25 m 20 Un.

Ref. 2001-002580 90 cm x 25 m 20 Un.

Ref. 2001-012025 120 cm x 25 m 20 Un.

Ref. 2001-018025 180 cm x 25 m 20 Un.

Ref. 2001-001330 35 cm x 25 yds 20 Un.

Ref. 2001-001340 60 cm x 25 yds 20 Un.

Ref. 2001-001350 90 cm x 25 yds 20 Un.

Ref. 2001-001360 120 cm x 25 yds 20 Un.

Ref. 2001-001370 180 cm x 25 yds 20 Un.

Ref. 2001-001581 400 cm x 300 m 10 microns - 1 Un.


Ref. 2001-001583 400 cm x 150 m 24 microns High Temperature (HT) 200ºC 1 Un.


Plastic film from 10 to 24 microns and 4 to 5 meters wide for quick masking of car bodywork. The outside has been treated with special products so as to guarantee paint spray adhesion. The inside sticks electrostatically to the car body. The outside has the brand’s name printed on so as to allow for correct laying.

Ref. 2004-001186 1 Un.

Mobile dispenser for film rolls. Easily transportable and highly durable.

Ref. 2004-004010 10 Un.

Blade designed especially for precise cutting of masking plastic film.

PLASTIC FILM WITH MASKING TAPE

KRAFT MASKING PAPER

CUTTING PLASTIC “POLYCUT” BLADE

MASKING FILM OF 4 M

MASKING FILM DISPENSER

Ref. 2001-001860 40 g 45 cm x 400 m 1 Un.

Ref. 2001-001870 40 g 60 cm x 400 m 1 Un.

Ref. 2001-001880 40 g 90 cm x 400 m 1 Un.

Ref. 2001-001890 40 g 120 cm x 400 m 1 Un.

Masking paper. Treated so as not to let paint or clear coat pass through. Each measure comes in an individual bag. Weight: 40 g/m2.


77

PERFECT FOAM “T”

PRIME PROTECT MASKING FOAM TAPE

AUTOADHESIVE MASKING FOAM TAPE

TRIANGULAR MASKING FOAM TAPE

2 IN 1 MASKING FOAM TAPE

Ref. 2001-002440 25 m 1 Un.

Auto-adhesive masking foam tape in the shape of a “T”. The middle of its basis is composed by an adhesive part resisting to drying temperatures of infrared dryers, endothermic panels or air heating. Both sides of the “T” are lightly el-evated to obtain an homogeneous and invisible spray application. Ideal for areas with small spaces.

Ref. 2001-002450 50 m 1 Un.

Adhesiveless foam tape in the shape of a triangle and indicated to avoid the fillers spraying to pass through the panels gaps such as doors gaps, hoods, car boots… To apply it easily, place it into the gaps and just pressure on it with no need of opening the doors. The few remaining spray mist would be easily removed during the sanding process.

Ref. 2001-002480 35 mm x 28 m 10 Un.

Double function foam tape that allows a unique application for a two step process. Composed by an outer perforated part and another inner adhesive one. During a wet on wet application, the external part avoids particles build up in the gaps between panels.The outer piece has to be removed before applying the paint; the inner adhesive piece could then be used as a standard masking foam tape.

Ref. 2001-002490 22 mm x 35 m 10 Un.

Oval adhesiveless foam tape composed of two different sizes parts, to use according the working process. Specifically indicated for outer application when there is a need to open doors, hoods or boots. Introduce between the vehicle gaps with the door closed and put a slight pressure on it. Fast and efficient working process.

Ref. 2001-002460 13 mm x 50 m 1 Un.

Ref. 2001-002470 18 mm x 40 m 1 Un.

Auto-adhesive masking foam tape made of polyester foam with a 28 kg/m3 density, for masking doors, boots, bonnets or any other openings.


78

Ref. 2002-001730 18 mm x 45 m 1 Box 96 Un.

Ref. 2002-001740 24 mm x 45 m 1 Box 72 Un.

Ref. 2002-001750 36 mm x 45 m 1 Box 48 Un.

Ref. 2002-001760 48 mm x 45 m 1 Box 36 Un.

Professional tape for vehicle masking. Resists up to 80ºC for 30 minutes. Does not leave glue residue.

Ref. 2002-007020 18 mm x 45 m 1 Box 48 Un.

Ref. 2002-007021 24 mm x 45 m 1 Box 36 Un.

Ref. 2002-007022 36 mm x 45 m 1 Box 24 Un.

Ref. 2002-007023 48 mm x 45 m 1 Box 24 Un.

Professional tape for vehicle masking. Resists up to 100ºC for 30 minutes. Does not leave glue residue.

Ref. 2002-001000 19 mm x 50 m 1 Box 48 Un.

Ref. 2002-000012 50 mm x 50 m 1 Box 16 Un.

Ref. 1002-007121 Applicator 1 Un.

High performance tape for vehicle masking. Strong adhesion on metal, glass, plastic and rubber. Resists UV rays. Does not leave glue residue, even after a 6-month application period. Resists up to 100ºC for 30 minutes.

Applicator roll for masking tape. Available for 19 mm CRS masking tape. Fold the tape remaining the adhesive part outwards. By pressuring, the applicator allows to directly bend and stick the tape on the surface to be protected, with-out any direct contact with the hands. Place the masking film on the edge of the adhesive tape and remove the excess oof film through the Polycut blade.

MASKING TAPE TOOL

EU ORANGE MASKING TAPE

MASKING TAPE

“TOP” MASKING TAPE


79

PROTECTOR FOR PARKING SENSORS

STRIPPING TAPE

PRE-CUT LIFTING TAPE

LIFTING TAPE

Ref. 2002-003071 10 mm x 10 m 12 Un.

Ref. 2002-003072 15 mm x 10 m 12 Un.

Ref. 2001-001570 20 mm x 10 m 12 Un.

Ref. 2011-001398 18 mm 1 Box 150 Un.

Ref. 2011-001399 13 mm 1 Box 150 Un.

Plastic strip on auto-adhesive tape for masking new windscreens and windowpanes. Pre-cut and very flexible for easy masking of curves.

Adhesive product specially indicated to protect the parking sensors during the process of painting works. Makes the work of the operator easier by saving time and retouching operations. Sales unit: 6 Boxes.

Ref. 2002-003080 25 mm x 14 m 10 Un.

Special outlining tape for vehicle masking. It comes with pre-cut, 1-mm bands so as to obtain multiple combinations. Very flexible. Any shape easily covered. Little paint accumulation.

Ref. 2002-011921 3 mm x 66 m 10 Un.

Ref. 2002-011922 6 mm x 66 m 10 Un.

Ref. 2002-011923 9 mm x 66 m 10 Un.

Ref. 2002-011924 12 mm x 66 m 10 Un.

Ref. 2002-011925 19 mm x 66 m 10 Un.

Outlining tape for vehicle masking. Does not crumple nor fold up at corners. Follows curves perfectly and adapts to any shape. Little paint accumulation.


80

Ref. 2002-001990 50 mm x 50 m 18 Un.

Silver, woven tape, covered by a protective film with strong adhesion power. Waterproof and abrasive-resistant.

Ref. 2001-001585 Roll 150 mm x 5 m 1 Un.

Auto-adhesive tape with a textured finish that imitates original finish on some model door frames. Easy to apply.

Ref. 2002-001780 6 mm x 10 m 10 Un.

Ref. 2002-000910 9 mm x 10 m 10 Un.

Ref. 2002-001210 12 mm x 10 m 10 Un.

Ref. 2002-001910 19 mm x 10 m 10 Un.

Ref. 2002-002510 25 mm x 10 m 10 Un.

Double-sided adhesive tape recommended for fixing moulds, emblems and accessories.

Ref. 2002-005006 9 mm x 10 m 10 Un.

Ref. 2002-005007 12 mm x 10 m 10 Un.

Ref. 2002-005008 19 mm x 10 m 10 Un.

Double-sided adhesive tape recommended for fixing moulds, emblems and accessories. Resists high temperatures. Strong adhesion on metal, glass and most plastics.

ALU TAPE

DOUBLE-SIDED ACRYLIC TAPE

TEXTURED ADHESIVE PLASTIC

DOUBLE-SIDED TAPE


81

Ref. 2001-001470 700 mm x 1 m 1 Roll 50 Sheets

Ref. 2001-001480 650 mm x 50 m 1 Roll 1 Un.

Pre-cut plastic sheet for protecting interior door panels so as to obtain an original finish. Protects against humidity and soundproofs the vehicle. Sheet in roll of 50 sheets pre-cutted of 700 mm x 1 m.Film plastic in roll of 650 mm x 50 m.

WHEEL RIM PROTECTOR FOR PAINTING

DOOR SKIN PLASTIC SHEET & FILM

WHEEL COVER-PP

WHEEL COVER-PLASTIC

Ref. 2011-001397 140 cm x 140 cm 1 Pack 8 Un.

Tyre protector for wheel rim painting. This new solution allows for tyre mask-ing without having to dismantle the entire wheel. The wheel needs deflating slightly, then the opening edge of the cover can be fixed under the wheel rim, then the cover can be adjusted to the whole tyre. There is no need for mask-ing tape nor paper, so reducing masking process from 15-20 minutes, thanks to its ecopolimeric nature, the cover is very flexible and adapts to all types of tyres, including those of trucks and buses. 20 microns.

Ref. 2001-002370 10 Packs 4 Un.

Reusable wheel cover. Resistant fabric. One size fits all.

Ref. 2001-001410 1 Roll 250 Un.

Disposable wheel cover made of transparent plastic.


82

Ref. 2011-001394 820 mm x 1350 mm 1 Roll 500 Un.

Ref. 2011-001301 Roll PE-HD 20 µ 6 x 50 m 1 Un.




Seat cover with a non-slip inside and a non-sticky outside.High resistance to tearing. 13 microns.

Roll of 20 microns plastic film, higly break-resisteant. Rolls of 50 metres long and available in several widths of 6, 8, 10 or 15 metres. Both extremities of the film includes hidden elastics that enable to tense the film under the vehicle and close it as a an airtight bag.

Ref. 2011-001392 490 mm x 150 mm 1 Roll 500 Un.

Steering wheel protector made of 13-micron pre-cut plastic. One size fits all.

Ref. 2011-001395 400 mm x 550 mm 1 Roll 500 Un.

Disposable 13-micron rug for protecting rugs and carpets during repair.

COVER VEHICLES FILM

PAPER PROTECTING CARPET

SEAT COVER

STEERING WHEEL COVER

85

Personal Protection Equipment

12


86

Ref. 2015-001001 30 Un.

Disposable hard mask. Filtration capacity FFPI.

Ref. 2015-001000 20 Un.

Disposable hard mask with a valve and adjustable nose seal.Filtration capacity FFP2.

Ref. 2015-001002 12 Un.

Disposable mask with a valve and adjustable nose seal.Filtration capacity FFP2.

Ref. 2015-001003 20 Un.

Disposable valve-free mask with an adjustable nose seal.Filtration capacity FFP2.

Ref. 2015-001004 12 Un.

Disposable folded mask with a valve and adjustable nose seal. Filtration capacity FFP2.

MASK SUPERONE 3203 (5185) FFP1 [Valve-free Anti-Dust Mask]

MASK CLASSIC CRS (5110) FFP2 [Valve-free Anti-Dust Mask]

FOLDED MASK CRS (4211) FFP2 [Anti-Dust Mask with Valve]

MASK SUPERONE 3206 (5211) FFP2 [Anti-Dust Mask with Valve]

MASK CLASSIC CRS (5209) FFP2 [Anti-Dust Mask with Valve]


87

MOLDEX COMPACT MASK

VALUAIR PLUS MASK [Mask for Protection against Solid Particles]

VALUAIR PLUS FILTER

MASK 5251 [Mask for Protection against Solid Particles]

FREEDOM MASK [Mask for Protection against Solid Particles]

Ref. 2400-000001 5230 FFA2P3 - 1 Un.

Ref. 2400-000002 5120 FFA1P2RD - 1 Un.

Ref. 2410-000001 PRE-FILTER 1 Pack 10 Un.

Light and comfortable mask. Others personal protection equipments may be worn: solder mask, glasses, etc. The exhalation valve has big openings to optimize the air circulation. Better visibility and perfect respiratory protection thanks to an horizontal lining up of the filters.

Ref. 4001-005595 20 Un.

Mask with a valve. Complies with EN 149:2000 standards, filtration capacity FFP2 (D) against welding fumes, organic steams, etc. Edges: boomerang. Nose seal: brown.

Ref. 4001-001573 1 Un.

Mask made of elastomeric rubber to be used with bayonet-mounted filters. Frontal exhalation valve. Can be used with graduate or protective eyewear.

Ref. 4001-001592 A1P1 1 Un.

Ref. 4001-001591 A2P3 1 Un.

Long-lasting disposable mask. Can be used with graduate or protective eyewear.Available with A1P1/ A2P3 filters.

Ref. 4001-001583 Bayonet-mounted filter / A2P3 (A) 2 Un.

Ref. 4001-001619 Bayonet-mounted filter / A1 (B) 2 Un.

Ref. 4001-002800 Pre-filter P1 (C) 20 Un.

Ref. 4001-002801 Pre-filter P2 (D) 20 Un.

Ref. 4001-001590 Retainer (E) 20 Un.


88

Ref. 2009-002330 Plastic PP 4 Boxes 25 Un.

Ref. 2009-002340 TYVEK® white 4 Boxes 25 Un.

Ref. 2009-001680 Non woven (non tissé) 1 Box 50 Pairs

Ref. 2009-002310 Plastique PP 1 Box 50 Pairs

Ref. 2009-002320 TYVEK® 1 Box 50 Pairs

Ref. 4002-006193 10 Un.

Indirect vented goggles with a Fogban® anti-fog lens and elastic headband. Can be used over prescription eyewear. With small hooks for holding protec-tive film. Ocular protection specification: 3-1.2 1 B 349.

V-MAXX GLASSES [Protective Goggles]

Ref. 4003-005821 1 Un.

Earmuffs with three-position adjustable headband, highly comfortable even over extended periods of use. For moderate sound levels. Can be used while wearing other protective accessories such as masks, face shields or hard hats. SNR 26 dB.

BLUE COMFORT EARMUFFS

HOOD FOR PAINTER & SHOES COVER

Hood For Painter

Shoes Cover

Ref. 4002-006437 1 Pack 10 Un.

Disposable protective lens with a polyester cover to be used on V-Maxx goggles.

V-MAXX LENS PROTECTIVE FILM

Ref. 4002-002783 10 Un.

Protective glasses with a one-piece wraparound polycarbonate lens, coated for resisting superficial damage. Shock-resistant polyamide frame.Ocular protection specification: EN 166-F, 3-1.2 D 1 F.

FOGBAN BLUE GLASSES [Protective Glasses]


89

Ref. 2009-000090 Size M 1 Un.

Ref. 2009-000100 Size L 1 Un.

Ref. 2009-000110 Size XL 1 Un.

Ref. 2009-000120 Size XXL 1 Un.

Painter’s hooded coverall with elastic at wrists, waist and hood. Complies with EU standards for personal protection gear, category II.

TYVEK PRO-TECH® COVERALL

Ref. 2009-001005 Size M 1 Un.

Ref. 2009-001006 Size L 1 Un.

Ref. 2009-001007 Size XL 1 Un.

Ref. 2009-001008 Size XXL 1 Un.

Breathable polyester coat with zipper, adjustable sleeves and hood. Front pocket.

POLYESTER WHITE COAT

Ref. 2009-010001 Size M 1 Un.

Ref. 2009-010002 Size L 1 Un.

Ref. 2009-010003 Size XL 1 Un.

Ref. 2009-010004 Size XXL 1 Un.

Painter’s hooded coverall with elastic at wrists, waist and hood.

POLYESTER COVERALL

Ref. 4005-011433 Size M 1 Un.

Ref. 4005-021433 Size L 1 Un.

Ref. 4005-031433 Size XL 1 Un.

Ref. 4005-041433 Size XXL 1 Un.

Painter´s hooded coverall, made of white non-woven polypropylene material (30g/m2) with a waterproof and breathable membrane. Antistatic properties on front and rear.

BASIC COVERALL


90

Ref. 2010-002491 Size M 10 Pairs

Ref. 2010-002492 Size L 10 Pairs

Ref. 2010-002493 Size XL 10 Pairs

Polyester gloves covered on the inside (palm and fingers) by a thin layer of black polyurethane that waterproofs the area and keeps dust and oil from penetrating, allowing full touch.Breathable and elastic.




White knit gloves covered on the inside (palm and finger tips) by a thin layer of polyurethane. Suitable for manipulating sharp pieces in either dry or greasy conditions. Allows full touch.Do not expose to heat: CE EN 420.




Lightweight gloves with full touch for handling delicate pieces. Made of grey polyamide. Gauge: 15. Covered on the inside (palm and fingertips) by a thin layer of grey polyurethane.

Ref. 2010-002660 Size M 10 Boxes Box of 100 Un.

Ref. 2010-002220 Size L 10 Boxes Box of 100 Un.

Ref. 2010-002670 Size XL 10 Boxes Box of 100 Un.

Gloves highly resistant to thinner. AQL 1.5.

Ref. 2010-001711 Size M 10 Boxes Box of 100 Un.

Ref. 2010-001710 Size L 10 Boxes Box of 100 Un.

Ref. 2010-001712 Size XL 10 Boxes Box of 100 Un.

Single-use latex gloves. AQL 1.5.

WORKEASY BLACK GLOVES [Protective Gloves]

CARS NITRILE GLOVES [Protective Gloves]

CARS LATEX GLOVES [Protective Gloves]

PERFECT CUTTING GLOVES [Protective Gloves]

POLY GREY GLOVES [Protective Gloves]


91

SUPER TOP PRO GLOVES [Reinforced Latex Gloves]

LATEX GLOVES PERFECT FIT [Protective Gloves]

QUICK HAND CLEANER [Hand Cleaning Paste]

NITRILE GLOVES PERFECT FIT [Protective Gloves]

NEOPRENE GLOVES PERFECT FIT [Protective Gloves]

Ref. 2010-001714 Size M 10 Boxes 50 Un.

Ref. 2010-001715 Size L 10 Boxes 50 Un.

Ref. 2010-001716 Size XL 10 Boxes 50 Un.

Reinforced elastic latex gloves highly resistant to chemical products, espe-cially cleaning solvents. Quality 20 grams.



Neoprene gloves with flockered cotton inside and non-slip finish. Thickness: 0,6 mm. Suitable when handling batteries, as well as certain thinned acids. CE EN 420.

Ref. 5013-001154 4 kg 4 Un.

Hand cleaning paste with great cleansing action for all types of cleaning. Apply a measure of Quick Hand Cleaner over wet hands, extend and rinse off with abundant water. Does not contain mineral abrasives. 90 % biodegradable.

Ref. 4004-004831 10 Pairs

Nitrile glove with flockered cotton inside and non-slip finish. Polyvalent chemical resistance. Thickness: 0,5 mm. CE EN 420.

Ref. 4004-004401 10 Pairs

Natural latex gloves with flockered cotton inside, non-slip finish. Thickness: 0,42 mm. Suitable when handling compound materials and lightweight objects in a wet environment. CE EN 420.

93

Abrasives

13

Abrasives

94

F1 BLUE LINE DISC 150 MM

15 holes abrasive disc on a high quality and high efficiency flexible plastic backing. Best heat dissipation due to the abrasion process.Fastest cutting speed thanks to the film backing rigidity. Both factors increase the performance of this disc with regard to the conventional paper discs. Velcro system. Diameter: 150 mm.Discs are available in 100 units’box, except for P60 (50 units’box).Sales unit: 6 Boxes.

Ref. 2014-006135 150 mm P60

Ref. 2014-006114 150 mm P80

Ref. 2014-006115 150 mm P100

Ref. 2014-006116 150 mm P120

Ref. 2014-006117 150 mm P150

Ref. 2014-006118 150 mm P180

Ref. 2014-006119 150 mm P220

Ref. 2014-006120 150 mm P240

Ref. 2014-006122 150 mm P320

Ref. 2014-006133 150 mm P360

Ref. 2014-006123 150 mm P400

Ref. 2014-006124 150 mm P500

Ref. 2014-006125 150 mm P600

Ref. 2014-006126 150 mm P800

F1 BLUE LINE DISC 75 MM

Abrasive disc on flexible plastic backing: high quality output. Velcro system. No holes. Diameter: 75 mm. Discs are available in 100 units’ boxes. Sales unit: 1 Box.

Ref. 2014-006085 75 mm P80

Ref. 2014-006086 75 mm P120

Ref. 2014-006087 75 mm P150

Ref. 2014-006088 75 mm P180

Ref. 2014-006089 75 mm P240

Ref. 2014-006090 75 mm P320

Ref. 2014-006091 75 mm P360

Ref. 2014-006092 75 mm P400

Ref. 2014-006093 75 mm P600

Ref. 2014-006109 75 mm P800

F1 SKYLON + DISC

Porous abrasive disc that allows either dust particles to pass when dry-sand-ing or water when wet-sanding. Diameter: 150 mm. No holes. Sales unit: 8 Boxes.

Ref. 2014-006040 150 mm P500 1 Box 10 Un.

Ref. 2014-006041 150 mm P1000 1 Box 10 Un.

Abrasives

95

F1 GOLD LINE + DISC

Abrasive disc system on reinforced paper backing of new generation. Oxide of aluminium with open structure. Thanks to the new protective coating from the grain will reduce the possible strap residue from sanding. Velcro system. Diameter: 150 mm. Discs are available in 100 units’ boxes. Sales unit: 6 Boxes.

Ref. 2014-006136 150 mm 15 Holes P80

Ref. 2014-006137 150 mm 15 Holes P100

Ref. 2014-006138 150 mm 15 Holes P120

Ref. 2014-006139 150 mm 15 Holes P150

Ref. 2014-006140 150 mm 15 Holes P180

Ref. 2014-006141 150 mm 15 Holes P220

Ref. 2014-006142 150 mm 15 Holes P240

Ref. 2014-006144 150 mm 15 Holes P320

Ref. 2014-006145 150 mm 15 Holes P360

Ref. 2014-006146 150 mm 15 Holes P400

Ref. 2014-006147 150 mm 15 Holes P500

Ref. 2014-006148 150 mm 15 Holes P600

Ref. 2014-006149 150 mm 15 Holes P800

F1 GOLD LINE FOAM SANDPAPER

Roll of sandpaper on foam backing. Especially suitable in work of sanding or nuanced hand where you need a high homogeneity. The foam provides the operator a better grip and improves comfort during operation.

Ref. 2007-007085 115 mm x 25 m P240 1 Un.

Ref. 2007-001290 115 mm x 25 m P320 1 Un.

Ref. 2007-001300 115 mm x 25 m P400 1 Un.

Ref. 2007-001310 115 mm x 25 m P500 1 Un.

Ref. 2007-006014 115 mm x 25 m P600 1 Un.

Ref. 2007-001320 115 mm x 25 m P800 1 Un.

F1 GOLD LINE DRY SANDPAPER

Roll of sandpaper for dry-sanding.

Ref. 2014-006159 115 mm x 25 m P40 1 Un.

Ref. 2014-006154 115 mm x 25 m P60 1 Un.

Ref. 2014-006155 115 mm x 25 m P80 1 Un.

Ref. 2014-006156 115 mm x 25 m P120 1 Un.

Ref. 2014-006158 115 mm x 25 m P240 1 Un.

Abrasives

96

Very flexible abrasive sponge allowing the sanding on any working area, even on the most difficult ones. Two sides, both recovered by an abrasive surface. Fine and perfect finishing.

Ref. 2007-001249 100 m x 120 mm Brown Fine grit 50 Un.

Ref. 2007-001250 100 m x 120 mm Blue Superfine grit 50 Un.

Ref. 2007-001251 100 m x 120 mm Violet Microfine grit 50 Un.

Abrasive sponge for sanding of hard-to-reach areas.

Ref. 2007-001200 115 mm x 140 mm Fine grit 100 Un.

Ref. 2007-001210 115 mm x 140 mm Superfine grit 100 Un.

Ref. 2007-001220 115 mm x 140 mm Microfine grit 100 Un.

Ref. 2007-001240 115 mm x 140 mm Ultrafine grit 100 Un.

DOUBLE-SIDED ABRASIVE SPONGE

F1 FOAM LINE + DISC

ABRASIVE SPONGE

15 holes abrasive disc on blue sponge backing of new technology and high flexibility. Composed by the same abrasive as for the double-sided abrasive sponges. This latest technology abrasive provides an even smoother finish. Diameter: 150mm. Discs are available in 15 units boxes. Sales unit: 6 Boxes.

Ref. 2014-006180 150 mm Fine grit 15 Holes 15 Un.

Ref. 2014-006181 150 mm Microfine grit 15 Holes 15 Un.

Ref. 2014-006185 150 mm Superfine grit 15 Holes 15 Un.

Abrasives

97

Ref. 2007-001090 150 mm x 250 mm Red Very fine 10 Un.

Ref. 2007-001080 150 mm x 250 mm Grey Ultrafine 10 Un.

Synthetic felt to be used on dry or wet surfaces. Ideal for matting.

Abrasive paper sheet for wet-sanding of paints, clear coats, fillers, etc.Even and uniform sanding.

Ref. 2014-006094 230 mm x 280 mm P220 100 Un.

Ref. 2014-600095 230 mm x 280 mm P240 100 Un.

Ref. 2014-006096 230 mm x 280 mm P280 100 Un.

Ref. 2014-006097 230 mm x 280 mm P320 100 Un.

Ref. 2014-006098 230 mm x 280 mm P360 100 Un.

Ref. 2014-006099 230 mm x 280 mm P400 100 Un.

Ref. 2014-006100 230 mm x 280 mm P500 100 Un.

Ref. 2014-006101 230 mm x 280 mm P600 100 Un.

Ref. 2014-006102 230 mm x 280 mm P800 100 Un.

Ref. 2014-006103 230 mm x 280 mm P1200 100 Un.

Ref. 2014-006104 230 mm x 280 mm P1500 100 Un.

Ref. 2014-006105 230 mm x 280 mm P2000 100 Un.

STAR BRITE SHEET

F1 LINE WET PAPER SHEET

Ref. 2007-001110 150 mm Red Very fine 15 Un.

Ref. 2007-001100 150 mm Grey Ultrafine 15 Un.

Synthetic felt to be used on dry or wet surfaces. Ideal for matting. Diameter: 150 mm. No holes.

STAR BRITE DISC

Ref. 2007-001125 115 mm x 10 m Red Very fine 1 Un.

Ref. 2007-001120 115 mm x 10 m Grey Ultrafine 1 Un.

Synthetic felt to be used on dry or wet surfaces. Ideal for matting.

STAR BRITE ROLL

Abrasives

98

Manual planer. Velcro system with extractor.

Ref. 2004-002270 81 mm x 153 mm 1 Un.


Ref. 2004-002260 70 mm x 400 mm 1 Un.


Ref. 2004-002620 70 mm x 198 mm 1 Un.


Ref. 2004-002610 70 mm x 125 mm 1 Un.


Ref. 2004-002280 115 mm x 230 mm 1 Un.

SANDING PLANE WITH DUST EXTRACTION





Abrasives

99

ABRASIVE SHEET F1 GOLD LINE

Flexible abrasive belt: high quality output. Velcro system. Artificial corundum abrasive. Bonder: polymerised Phenolic resin. Bonder additive: calcium car-bonate. Backing: paper. 14 Holes.

Ref. 2014-006060 70 mm x 420 mm 14 Holes P80 100 Un.
































Abrasives

100

SANDING BLOCKS KIT

Case containing one flat block, two concave blocks and three convex blocks that adapt to each other, making it easy to reach any area.

Ref. 2004-001610 1 Kit Kit of 6 Un.

SANDING BLOCKS

Sanding block with Velcro fixing system for discs of 150-mm diameter. Available: plane and concave.

Ref. 2004-001790 Plane 6 Un.

Ref. 2004-002350 Concave 6 Un.

RUBBER SANDING BLOCK

Rubber sanding block for wet-sanding.

Ref. 2004-002040 Brown 5 Un.

Ref. 2004-002450 Black 5 Un.

NYLON SANDING BLOCK

Nylon sanding block. Dimensions: 210 mm x 105 mm.

Ref. 2004-002360 1 Un.

Abrasives

101

TWISTER PLATE 15/97

PLATE AND INTERFACE 75 MM

SOFT INTERFACE 15/97

TWISTER INTERFACE PROTECTOR 15/97

Ref. 2004-002700 150 mm Hard Blue 1 Un.

Ref. 2004-002701 150 mm Medium Black 1 Un.

Ref. 2004-002542 Protector 1 Bag 10 Un.

Ref. 2004-002540 15/97 Holes 5 mm 1 Bag 10 Un.

Ref. 2004-002541 15/97 Holes 10 mm 1 Bag 10 Un.

Ref. 2004-007099 Plate 3 Holes 75 mm 1 Un.

Ref. 2004-002580 Interface No holes 75 mm 1 Un.

Revolutionary plate that provides almost total elimination of dust from the working surface and even part from the atmosphere. Universal system of 15 holes combined with a multi-holes system (97 holes in total). Provided with two screws: 5/16” and M8. Available in two harnesses: medium or hard. Diameter 150 mm.

Velcro protector disc of 1 mm thick. Extends the lifetime of the sanding plate.

Sponge disc to be placed between the abrasive disc and the plate. Enables a finer cut and therefore a better finish. For an optimum result with this inter-face, it is recommended to use fine grain (P220 and above). Velcro system.Thickness: 5 mm and 10 mm.

Hard velcro plate for mini sanding machine of 75 mm diameter.Sponge interface to be placed between the abrasive and the plate. Enables a finer cut and therefore a better finish. For an optimum result with this in-terface, it is recommended to use fine grain (P220 and above). Velcro system. Thickness: 10 mm.

Abrasives

102

STRIPPING GEL

SODA BLASTING GUN

Manual gun with tank designed for paint abrasion, serigraphs and elimination of superficial pollutants on metal. Specially indicated for precision work on very low or heat sensitive metals during the scraping due to the under pressure sandblast-ing process.

Gun content capacity: 1,2 liters. Consumable: sodium bicarbonate, available in 5 liters bags.

Ref. 1001-007102 Gun 1.2 l 1 Un.

Ref. 1002-007100 Consumable sodium bicarbonate 5 l 1 Un.

Ref. 1002-007120 Peak Nozzle Mod. 145950 1 Un.

Ref. 1002-007122 Plane Nozzle Mod. 145955 1 Un.

Stripping gel to remove paints, primers, putties and powder coatings.

Ref. 5015-000001 Tin 1 kg 1 Box 12 Un.

Ref. 5015-000002 Cylinder 5 kg 1 Box 3 Un.

CARBON FIBRE DISC

Fibre disc designed for getting rid of oxide residue, rust, paint, synthetic material, etc.Diameter: 150 mm.

Ref. 2013-001140 150 mm 15 Un.

FIBRE DISC

Fibre disc specifically used for removing residue and waste as well as oxide and paint.Diameter: 115 mm.

Ref. 2007-002090 115 mm Grit 16 25 Un.

Ref. 2007-002100 115 mm Grit 24 25 Un.

Ref. 2007-002110 115 mm Grit 36 25 Un.

Ref. 2007-002120 115 mm Grit 60 25 Un.

FIBRE DISC

Fibre disc specifically used for removing residue and waste as well as oxide and paint.Diameter: 178 mm.

Ref. 2007-002130 178 mm Grit 16 25 Un.

Ref. 2007-002140 178 mm Grit 24 25 Un.

Ref. 2007-002150 178 mm Grit 36 25 Un.

Ref. 2007-002160 178 mm Grit 60 25 Un.

Abrasives

103

EASY SANDING [Lubricant]

QUICK SANDING CONTROL [Sanding Control Spray]

ABRASIVE RUBBER

DRY COAT CONTROL [Sanding Control]

Lubricating spray to be used with water-based, manual or power abrasives as well as with spray removal abrasive rubbers. When used with finish sandpapers like Skylon, it reduces temperature during sanding, therefore, increasing output and improving finish.


Ref. 2007-002520 Sprayer 1 l 16 Un.

Abrasive rubber for removing paint spray, metal, dust, etc., from painted surfaces without damage.Blue: fine grain.Pink: medium grain.Provided in a 385 ml mixing cup with its lid.

Ref. 2007-055330 Blue 3 Un.

Ref. 2007-055340 Pink 3 Un.

Sanding control manual applicator. Presents two interchangeable containers. To be placed directly on the bodywork, then sprayed and finally spread over surface to sand.

Ref. 2004-000010 1 Un.

Sanding control spray. Fast drying. Fat and silicone-free.

Ref. 5011-006022 Spray 500 ml 12 Un.

Abrasives

104

Rubber disc for removing adhesives and moulding residues without scratching nor damaging paint work.

Ref. 2013-001111 6 Un.

Rubber disc for removing adhesives and moulding residues without scratching nor damaging paint work. The fan system makes work easier and cleaner.

Ref. 2013-001112 6 Un.

Handy adapter for placing decal or adhesive removal discs.

Ref. 2013-001113 1 Un.

STRIPPING TOOL CRS

ADAPTER FOR REMOVAL DISCS

ADHESIVE REMOVAL RUBBER DISC - STANDARD

ADHESIVE REMOVAL RUBBER DISC - VENTILATED

Pneumatic tool for adhesive-remover rubber discs.

Ref. 1007-007530 1 Un.

107

Electric & Pneumatic ToolsWorkshop Tools

14

Electric & Pneumatic Tools [Workshop Tools]

108

Rotative polisher for professional use for works of polishing and buffering in body workshops, washing and polishing, industry, etc. Its ergonomic design and light weight makes it very handy and reduces the physical work of the operator.

Rotative polisher for professional use for works of polishing and buffering in body workshops, washing and polishing, industry, etc. Ergonomic design and light weight. Includes a plate and a travel bag.

Random orbital polisher for professional use with 150 mm plate and 21 mm or-bit. Low vibrations technology that reduces the physical work of the operator. Ideal for polishing works that require an important roughing and for buffering process to avoid holograms.

Ref. 1014-005005 1 Un.

Ref. 1014-005002 1 Un.

Ref. 1014-005006 1 Un.

ELECTRIC POLISHER HP SPC 7100

ELECTRIC POLISHER SPC 7102

ELECTRIC ROTATING ORBITAL POLISHER SPC 7121

Voltage Power Speed WeightAxisAccessories

Voltage Power Speed WeightAxisLenghtAccessories

Voltage Power Speed Weight OrbitAccessories

220/2401100 W700-1850 r.p.m2 kgM14Side handle

220/2401150 W100-3500 r.p.m2.2 kgM146 mSide handle, plate and travel bag

220/2401150 W2000-4500 r.p.m2.5 kg21 mmSide handle, plate 150 mm


109

Electric random orbital sander 150 mm. Includes a 15 holes plate and an auto vacuum system for dust. Available in two orbits: 5 mm and 3 mm.

Pneumatic manual rotating orbital sander with dust removal device to con-nect to hoovers. Equipped with an auto-lock system for changing the pad with no need for keys. Work pressure regulator. Blow hole for blowing air out during work and cleaning after work. Plate: 150 y 75 mm. Plate not included.

Ref. 1014-005003 Ø 5 mm 1 Un.

Ref. 1014-005004 Ø 3 mm 1 Un.

ELECTRIC ROTATING ORBITAL SANDER CRS 7105 y CRS 7103

ROTATING ORBITAL SANDER GPS304 Y GPS306

Air pressure

Air consumption

Orbit diameter

Orbits per minute

Dust extractor connection

Noise level

Weight

Size

Pad diameter

6.3

270

5

12000

29

84

750

20x15x12

150

GPS304 GPS3066.3

270

2,5

12000

29

81

690

17x7x8

75

atm

l/min

mm

nº

d.mm

dBA

g

cm

mm

Ref. 1013-000020 GPS304 Ø 5 mm 150 mm plate 1 Un.

Ref. 1013-000023 GPS306 Ø 2,5 mm 75 mm plate 1 Un.

High power pneumatic sander equipped with low vibration technology. The chassis is covered with a non-slip rubber which improves grip and comfort. Lever-action ergonomic and progressive. Bearing on line that extends the useful life of the Sander.

Ref. 1013-000024 Ø 6 mm 1 Un.

PNEUMATIC ROTATING ORBITAL SANDER CRS7115

Presure Air consumptionSpeedWeightPadScrew anchorOrbitAccessories

6.2 bar340l/minutes0-11000 r.p.m.0.8 kg150 mmM8-H6 mmIncludes pad

VoltagePowerSpeed WeightPlateScrew anchorOrbitAccessories

220/240450 W5000-10000 r.p.m2.1 kg150 mmM8-H5 and 3 mmIncludes pad


110

SMART REPAIR KIT

INFRARED THERMOMETER CRS

STRIPPING TOOL CRS

Ref. 1007-005001 Kit - 1 Un.

Ref. 9004-001072 Plate 30 mm 1 Un.

Ref. 9004-001071 Plate 75 mm 1 Un.

· Mini sanding machine - pneumatic polishing machine

Kit for mending minor imperfections and small express repairs. Contains:

LengthWeight OrbitPlatesMaximum SpeedAir ConsumptionEntry thread diameter

· 30 mm plate· 75 mm plate· Smart Repair Compounding Foam 3’’· Smart Repair Polishing Foam 3’’· Air regulator· Spare plate· Dismantling spanner key set· F1 Blue Line 75 mm discs (P1200, 1500, 2500 y 3000). Samples.· F1 Blue Line 35 mm discs (P1500, 2500 y 3000). Samples.

109 x 47 mm340 g3 mm75 y 35 mm / M616500 rpm368 l/m¼

OPTIMUM LIGHT

Cordless rechargeable lamp for a perfect colours perception. This lamp is equipped with a lithium battery and a charge indicator. Enables a perfect co-lours perception thanks to two natural light intensities. The LED characteris-tics makes the lamp perfect for preparing, painting, polishing and cleaning tasks. Adaptable hook and magnetic base for comfortable work and easy movements.Two available powers. Battery life: up to 3 hours. Automatic shut down sensor after three minutes at maximum power.

Ref. 1008-001800 Lamp 1 Un.

Ref. 1008-001801 Stylo 1 Un.

Thermometer equipped with an infrared sensor and an ultrasound transmitter to measure exactly any surface temperature. Fast and accurate. Display on LCD screen, in Celsius or Fahrenheit degrees. Temperature measurement: -50ºC to 380ºC / - 58ºF to 716ºF.Especially indicated when direct contact with the surface is not recommend-ed or considered as dangerous.

Pneumatic tool for adhesive-remover rubber discs.

Ref. 1014-005000 1 Un.

Ref. 1007-007530 1 Un.


111

INFRARED CRS-3C WITH DISTANCE SENSOR

Time indicator

4 Memories

Emitter selection

Flash time programming

Continued time programming

Distance sensor

On/Off

Power

This short-wave infrared system (CRS-3C) is suitable for drying two-component products used in bodywork repair. Its main characteristics are deep reach, reduced drying time, low power consumption, maximum adaptability and use efficiency. Highly flexible and easy to move.

Equipped with distance sensor.

The CRS-3C lamp is equipped with a timer that determines both drying level and time. The equipment distance and height can be easily adjusted. Heights: 40 and 200 cm. Comes with 4 digital memories that store drying time for each product.

Ref. 1011-007768 Infrarouges 1 Un.

Ref. 1011-007767 Lamp spare parts 1 Un.

Input power

Voltage

Short-wave infrared quartz halogen emitter

Maximum power

Time ranges

Drying surface

Drying temperature

13.7 A

220-240 V / 50 HZ

3 × 1050 W

3200 W

2 × 35 min.

1.0 × 0.8 m

60°C - 70°C


112

INFRARED CRS-1C

This infrared system (CRS-1C) is suitable for drying two-component products used in bodywork repair. Its main characteristics are deep reach, reduced drying time, low power consumption, maximum adaptability and use efficiency. Highly flexible and easy to move.

The CRS-1C lamp is equipped with a timer that determines both drying level and time. The equipment distance and height can be easily adjusted. Height is comprised between 20 cm and 160 cm.

Ref. 1011-007769 Infrarouges 1 Un.

Ref. 1011-007767 Lamp spare parts 1 Un.

Input power

Voltage

Short-wave infrared quartz halogen emitter

Maximum power

Time ranges

Drying surface

Drying temperature

4,6 A

220-240 V / 50 HZ

1 × 1050 W

1100 W

2 × 35 min

0.6 × 0.4 m

60°C - 70°C

Flash time programming

Continued time programming

Power

115

Bodyshop Equipment

15

Bodyshop Equipment

116

Drying gun with abundant air flow and acute blowing precision. InclUn.es a plastic tip to protect bodywork while blowing.

Ref. 1008-007109 1 Un.

Complete blow gun.

Ref. 1008-007518 1 Un.

High volume blow gun.

Ref. 1008-007550 1 Un.

VENTURI AIR GUN

CRS-BG1 AIR GUN

DUSTER CRS-2012 AIR GUN

HIGH VOLUME AIR GUN

STONE CHIP STANDARD GUN

Gun for applying anti-gravel products and waxes, either water-based or acrylic.

Venturi air gun for drying of water-borne paints. The channeling of the com-pressed air creates turbulence (Venturi) that directly impacts the surface to dry, reducing significantly waiting times.

Ref. 1009-007519 1 Un.

Ref. 1011-001185 1 Un.

Bodyshop Equipment

117

STAND FOR DISMANTLED PARTS

STAND FOR SMALL PARTS

EASY QUICK ROTATING STAND

HOLDING STAND

JUMBO STAND

Mobile trolley for storing dismantled pieces during repair in bodyshop.

Ref. 2004-001813 1 Un.

Stand for pieces and mirrors. Stable and handy. InclUn.es three clamps for holding small pieces and 1 mirror holder.The maximum weight that it can support is 20 kg.

Ref. 2004-001811 Stand 1 Un.

Ref. 1008-001811 Clamp 1 Un.

Ref. 1008-001812 Mirror Holder 1 Un.

Application stand with a wide rotating angle. Easy and quick to move.

Ref. 2004-001187 1 Un.

Stand for horizontal and vertical holding of door panels and other items. Equipped with a rotating system (up to 360º) controlled by a pedal. InclUn.es an extension that allows working with 2 items at a time.Dimensions, inclUn.ing extension: 2100 mm x 810 mm x 1050 mm.

Ref. 2004-002050 1 Un.

Stand for horizontal and vertical holding of all types of items. Made of gal-vanised steel. Dimensions : 1060 mm x 1300 mm x 60 mm.Adjustable height: 46, 69, 88, 104 and 117 cm.

Ref. 2004-001810 1 Un.

Bodyshop Equipment

118

Adjustable grip to hold the door handles, grilles, covers, mouldings, etc. Easy to fit to two stands (Multiflex and Easyflex) thanks to a quick attachment.

Ref. 2004-001805 1 Un.

FLEX STABLE GRIP

Holds all small parts (covers, moulding…) in need of painting.

Ref. 2004-001806 1 Un.

FLEX GRIP WITH BRACKETS

Clamps for holding on to any and all items that can only be held on to from within (squeeze out).

Ref. 2004-001807 1 Un.

FLEX PRESS OUT CLAMPS

Kit composed by 4 stainless steal rods with 4,5,6 & 8mm male and female threads. Easy to screw up the spoiler thanks to its quick attachment.

Ref. 2004-001803 1 Un.

FLEX SPOLIERS KIT

Multiflex and easyflex accessories

121

IndexAlphabetical Index

16

Index [Alphabetical Index by Description]

122

2007-055330 P-103 ABRASIVE RUBBER BLUE

2007-055340 P-103 ABRASIVE RUBBER PINK

2014-006065 P-99ABRASIVE SHEET F1 GOLD LINE 70 MM x 125 MM 8 HOLES P80
























2007-001200 P-96 ABRASIVE SPONGE 115 MM x 140 MM FINE GRIT

2007-001220 P-96 ABRASIVE SPONGE 115 MM x 140 MM MICROFINE GRIT

2007-001210 P-96 ABRASIVE SPONGE 115 MM x 140 MM SUPERFINE GRIT

2007-001240 P-96 ABRASIVE SPONGE 115 MM x 140 MM ULTRAFINE GRIT

5009-001155 P-49 ACELERATOR FOR ACRYLICS

2013-001113 P-104 ADAPTER FOR REMOVAL DISCS

2012-001543 P-56ADAPTORS CAR REFINISH SYSTEM FOR CRS007, SATA AND IWATA

2012-001545 P-56 ADAPTORS CAR REFINISH SYSTEM FOR DEVILBISS

2012-001544 P-56ADAPTORS CAR REFINISH SYSTEM FOR IWATA WS, SUPERNOVA, AEROMETAL

2012-001550 P-56 ADAPTORS CAR REFINISH SYSTEM FOR MINI SAGOLA 4400

2012-001549 P-56 ADAPTORS CAR REFINISH SYSTEM FOR QCC-SATA

2012-001551 P-56ADAPTORS CAR REFINISH SYSTEM FOR SAGOLA 4400, 4500, 4600

2012-001546 P-56 ADAPTORS CAR REFINISH SYSTEM FOR SATA / KREMLIN

2012-001552 P-56 ADAPTORS CAR REFINISH SYSTEM FOR SATA MINI

2012-001553 P-56 ADAPTORS CAR REFINISH SYSTEM FOR WALCOM

5006-001098 P-29 ADHESIVE FIBRE

2013-001111 P-104 ADHESIVE REMOVAL RUBBER DISC-STANDARD

2013-001112 P-104 ADHESIVE REMOVAL RUBBER DISC-VENTILATED

1002-007102 P-51 AIR REGULATOR CRS

2002-001990 P-80 ALU TAPE

5011-001005 P-37 ALUMINIUM PAINT DARK B06 SPRAY 400 ML

5011-001001 P-37 ALUMINIUM PAINT FINE B02 SPRAY 400 ML

5011-001002 P-37 ALUMINIUM PAINT MEDIUM B03 SPRAY 400 ML

5011-001003 P-37 ALUMINIUM PAINT SPARKLING B04 SPRAY 400 ML

5011-001004 P-37 ALUMINIUM PAINT SUPER SPARKLING B05 SPRAY 400 ML

5011-001000 P-37 ALUMINIUM PAINT ULTRA FINE B01 SPRAY 400 ML

5014-001000 P-37 ALUMINIUM WHEEL KIT

1002-000003 P-50ANTIDRIP PVC CUP FOR TOUCH GUN CRS-PRO MINI 2017 300 ML

2004-007003 P-64 APPLICATION KIT CRS 6"

2001-002460 P-77 AUTOADHESIVE MASKING FOAM TAPE 13 MM x 50 M

2001-002470 P-77 AUTOADHESIVE MASKING FOAM TAPE 18 MM x 40 M

4005-011433 P-89 BASIC COVERALL SIZE M


123

4005-021433 P-89 BASIC COVERALL SIZE L

4005-031433 P-89 BASIC COVERALL SIZE XL

4005-041433 P-89 BASIC COVERALL SIZE XXL

5003-000001 P-19 BUTYL CORD

5003-001002 P-19 BUTYL FILLER

2013-001140 P-102 CARBON FIBRE DISC 150 MM

2004-007001 P-64 CARS BUFFING PAD BLACK

2010-001711 P-90 CARS LATEX GLOVES SIZE M

2010-001710 P-90 CARS LATEX GLOVES SIZE L

2010-001712 P-90 CARS LATEX GLOVES SIZE XL

2010-002660 P-90 CARS NITRILE GLOVES SIZE M

2010-002220 P-90 CARS NITRILE GLOVES SIZE L

2010-002670 P-90 CARS NITRILE GLOVES SIZE XL

2004-007002 P-64 CARS POLISHER PLATE

2004-007000 P-64 CARS POLISHING PAD WHITE

2004-002770 P-66 CELLULOSE SPONGE

5004-006040 P-37 CHROME EFFECT

2003-002400 P-17 CLEANING CLOTH

1002-007100 P-102 CONSUMABLE SODIUM BICARBONATE 5 L

2011-001301 P-82 COVER VEHICLES FILM PE-HD 20 µ 6 X 50 M




8010-000001P-65

P-72CRS DECONTAMINATION MITT

1008-007109 P-116 CRS-BG1 AIR GUN

1001-000001 P-50 CRS-PRO 2017 HVLP 1.3 MM GUN

1001-000002 P-50 CRS-PRO 2017 MP 1.3 MM GUN

1001-000003 P-50 CRS-PRO MP 1.7 MM GUN FOR FILLER

5010-000003 P-63 CRYSTAL 4000

2004-004010 P-76 CUTTING PLASTIC “POLYCUT” BLADE

5009-001033 P-49 DEGREASER CARS 0467 FAST 1 L

5009-001025 P-49 DEGREASER CARS 0467 FAST 5 L

5009-001144 P-49 DEGREASER CARS 9410 SLOW 1 L

5009-001145 P-49 DEGREASER CARS 9410 SLOW 5 L

5010-000001 P-63 DIAMOND 1500

2004-000001 P-52 DISPENSER FOR PAPER ROLLS AND POLYTEX

2012-001333 P-58 DISPOSABLE MIXING STIRRERS CRS

2001-001480 P-81 DOOR SKIN FILM

2001-001470 P-81 DOOR SKIN PLASTIC SHEET

2004-004030 P-19 DOUBLE NYLON BRUSH

2004-001250 P-96DOUBLE-SIDED ABRASIVE SPONGE 100 M X 120 MM BLUE SUPERFINE GRIT

2004-001249 P-96DOUBLE-SIDED ABRASIVE SPONGE 100 M X 120 MM BROWN FINE GRIT

2004-001251 P-96DOUBLE-SIDED ABRASIVE SPONGE 100 M X 120 MM VIOLET MICROFINE GRIT

2002-005006 P-80 DOUBLE-SIDED ACRYLIC TAPE 9 MM x 10 M



2002-001780 P-80 DOUBLE-SIDED TAPE 6 MM x 10 M





2004-000010 P-103 DRY COAT CONTROL

2004-001240 P-51 DUST REMOVAL NEEDLES SET 6 NEEDLES

2004-001770 P-51 DUST REMOVAL NEEDLES KIT 10 NEEDLES + PEN

1008-007518 P-116 DUSTER CRS-2012 AIR GUN

5009-001219 P-44 EASY FILLER 4000 BLACK

5009-001221 P-44 EASY FILLER 4000 DARK GREY

5009-001220 P-44 EASY FILLER 4000 LIGHT GREY


124

5009-001218 P-44 EASY FILLER 4000 WHITE

5009-001223 P-44 EASY FILLER HARDENER EXTRA FAST

5009-001222 P-44 EASY FILLER HARDENER STANDARD

2004-001187 P-117 EASY QUICK ROTATING STAND

2007-001150 P-103 EASY SANDING 5 L

2007-002520 P-103 EASY SANDING 1 L

5010-000004 P-63 ECLIPSE 1 L

1014-005005 P-108 ELECTRIC POLISHER HP SPC 7100

1014-005002 P-108 ELECTRIC POLISHER SPC 7102

1014-005006 P-108 ELECTRIC ROTATING ORBITAL POLISHER SPC 7121

1014-005004 P-109 ELECTRIC ROTATING ORBITAL SANDER CRS 7103 - Ø 3 MM

1014-005003 P-109 ELECTRIC ROTATING ORBITAL SANDER CRS 7105 - Ø 5 MM

2002-001000 P-78 EU ORANGE MASKING TAPE 19 MM x 50 M

2002-000012 P-78 EU ORANGE MASKING TAPE 50 MM x 50 M

2014-006085 P-94 F1 BLUE LINE DISC 75 MM P80
























2014-006180 P-96 F1 FOAM LINE + DIS 150 MM FINE GRIT 15 HOLES

2014-006181 P-96 F1 FOAM LINE + DIS 150 MM MICROFINE GRIT 15 HOLES

2014-006185 P-96 F1 FOAM LINE + DIS 150 MM SUPERFINE GRIT 15 HOLES

2014-006136 P-95 F1 GOLD LINE + DISC 150 MM 15 HOLES P80













2014-006159 P-95 F1 GOLD LINE DRY SANDPAPER 115 MM x 25 M P40





125


2007-007085 P-95 F1 GOLD LINE FOAM SANDPAPER 115 MM x 25 M P240






2014-006094 P-97 F1 LINE WET PAPER SHEET 230 x 280 MM P220












2014-006033 P-62 F1 SKYLON + DISC 75 MM P2000






2007-002090 P-102 FIBRE DISC 115 MM GRIT 16








5001-001454 P-11 FILL BLACK CARBON

5006-001081 P-29 FILL FLEX

5001-001031 P-09 FILL GLASS

5001-001082 P-08 FILL LIGHT PLUS

5001-001125 P-09 FILL METAL

5001-001000 P-37 FILL METAL 750 G + HARDENER 750 ML

5001-006106 P-08 FILL MULTILIGHT PLUS

5001-001086 P-09 FILL MULTISOFT BEIGE 1.8 KG

5001-001092 P-09 FILL MULTISOFT BEIGE 3 KG

5006-001126 P-29 FILL PLAS

5001-000032 P-10 FILL POLISPRAY

5001-001081 P-08 FILL SOFT BLANC CARTOUCHE 2 KG

5001-001083 P-08 FILL SOFT BLANC TIN 2 KG

5009-001150 P-44 FILLER AND SUFACER HS 540 BLACK 3.6 L

5009-001147 P-44 FILLER AND SUFACER HS 540 GREY 3.6 L

5009-001146 P-44 FILLER AND SUFACER HS 540 WHITE 3.6 L

5009-001161 P-44 FILLER AND SURFACER HS 540 1 L BLACK + HARDENER

5009-001160 P-44 FILLER AND SURFACER HS 540 1 L GREY + HARDENER

5009-001163 P-44 FILLER AND SURFACER HS 540 1 L WHITE + HARDENER

5001-001456 P-11 FILLER TRANSPARENT CARBON 2K + HARDENER

2004-001806 P-118 FLEX GRIP WITH BRACKETS

2004-001807 P-118 FLEX PRESS OUT CLAMPS

2004-001803 P-118 FLEX SPOLIERS KIT

2004-001805 P-118 FLEX STABLE GRIP

2004-000004 P-65 75 MM FLEXIBLE POLISHER PLATE


126

5004-000103 P-63 FOAM PAD CRYSTAL 4000

5010-000102 P-63 FOAM PAD QUARTZ 2500

4002-002783 P-88 FOGBAN BLUE GLASSES

2015-001004 P-86 FOLDED MASK CRS (4211) FFP2

4001-001592 P-87 FREEDOM MASK A1P1

4001-001591 P-87 FREEDOM MASK A2P3

8010-000007 P-71 GLASS CLEANER EXTRA STRONG 500 ML

2006-001050 P-59 GRAVITY FILTER

5001-001001 P-40 H.E. FILL ULTRAFLEXIBLE SOFT

5009-001231 P-40 H.E. FILLER FAST DRYING DARK GREY

5009-001230 P-40 H.E. FILLER FAST DRYING LIGHT GREY

5009-001232 P-40 H.E. FILLER WET ON WET

5011-001067 P-41 H.E. QUICK WASH PRIMER

5009-001120 P-41 H.E. STAR LACK FAST DRYING 2:1

5009-001122 P-41 H.E. STAR LACK FAST DRYING HARDENER FAST

5009-001123 P-41 H.E. STAR LACK FAST DRYING HARDENER SLOW

5009-001121 P-41 H.E. STAR LACK FAST DRYING HARDENER STANDARD

5009-001233 P-40 H.E. UNIVERSAL FILLER HARDENER

5006-001101 P-48 HEADLIGHTS KIT

3001-005003 P-48 HEADLIGHTS REPAIR KIT

1008-007550 P-116 HIGH VOLUME AIR GUN

2003-001050 P-52 HITEX 4000

2004-002050 P-117 HOLDING STAND

2009-002330 P-88 HOOD FOR PAINTER PLASTIC PP

2009-002340 P-88 HOOD FOR PAINTER TYVEK® WHITE

5009-001154 P-44 HS FILLER HARDENER 541 EXTRA FAST

5009-001159 P-44 HS FILLER HARDENER 541 STANDARD

2004-002670P-66

P-72HYDRA FLEXI BLADE

1011-007769 P-112 INFRARED CRS-1C

1011-007768 P-111 INFRARED CRS-3C WITH DISTANCE SENSOR

1014-005000 P-110 INFRARED THERMOMETER CRS

8010-000010 P-71 INSECT REMOVER EXTRA STRONG 500 ML

2004-002580 P-101 INTERFACE 75 MM NO HOLES

5009-001190 P-49 IONISER WB 1 L

5009-001189 P-49 IONISER WB 5 L

2004-001810 P-117 JUMBO STAND

2012-001541 P-56 KIT CAR REFINISH SYSTEM 125 µ

2012-001542 P-56 KIT CAR REFINISH SYSTEM 190 µ

5002-001060 P-16 KIT DG QUICK SEAL PLUS FAST

5002-001061 P-16 KIT DG QUICK SEAL STANDARD

5001-001128 P-10 KIT FIBER REPAIR

2004-000005 P-65 KIT OF 3 EXTENSIONS FOR POLISHERS

2001-001860 P-76 KRAFT MASKING PAPER 40 G 45 CM x 400 M




1011-007767 P-112 LAMP SPARE PARTS FOR INFRARED CRS-1C

1011-007767 P-111 LAMP SPARE PARTS FOR INFRARED CRS-3C

4004-004401 P-91 LATEX GLOVES PERFECT FIT

8010-000002 P-70 LEATHER CARE 250 ML

8010-000003 P-70 LEATHER CLEANER 75 ML

2002-011921 P-79 LIFTING TAPE 3 MM x 66 M





2002-001980 P-20 LOGO TAPE

4003-005821 P-88 BLUE COMFORT EARMUFFS


127

2004-003000 P-51 MAGNETIC GUN BRACKET

1010-007522 P-21 MANUAL GUN CRS 2050

4001-005595 P-87 MASK 5251

2015-001003 P-86 MASK CLASSIC CRS (5110) FFP2

2015-001002 P-86 MASK CLASSIC CRS (5209) FFP2

2015-001001 P-86 MASK SUPERONE 3203 (5185) FFP1

2015-001000 P-86 MASK SUPERONE 3206 (5211) FFP2

2001-001582 P-76 MASKING FILM 400 CM x 150 M 10 MICRONS

2001-001581 P-76 MASKING FILM 400 CM x 300 M 10 MICRONS

2001-001586 P-76 MASKING FILM 500 CM X 150 M 10 MICRONS

2004-001186 P-76 MASKING FILM DISPENSER

2001-001583 P-76 MASKING FILM HT (200ºC) 400 CM x 150 M 24 MICRONS

2002-001730 P-78 MASKING TAPE 18 MM x 45 M




1002-007121 P-78 MASKING TAPE TOOL

5009-001306 P-47 MATTING ADDITIVE CRS

8010-000006 P-71 METAL POLISH LIQUID 250 ML

2006-002290 P-59 METALIC SUCTION FILTER

1008-002000 P-58 MICROBRUSH REGULAR BLUE

2003-007029P-66

P-72MICROFIBRE CLOTH

2004-007025 P-58 MINI BOTTLE FOR PAINT SAMPLE

2007-002190 P-62 MINI SANDING BLOCK

1008-001812 P-117 MIRROR HOLDER FOR STAND FOR SMALL PARTS

2012-001420 P-56 MIXING CUP 385 ML

2012-001440 P-56 MIXING CUP 750 ML

2012-001500 P-56 MIXING CUP 1400 ML

2012-001520 P-56 MIXING CUP 2300 ML

2012-001430 P-56 MIXING LID 385 ML

2012-001450 P-56 MIXING LID 750 ML

2012-001510 P-56 MIXING LID 1400 ML

2012-001530 P-56 MIXING LID 2300 ML

2012-001334 P-57 MIXING RULER CRS

2400-000002 P-87 MOLDEX COMPACT MASK 5120 FFA1P2RD

2400-000001 P-87 MOLDEX COMPACT MASK 5230 FFA2P3

2410-000001 P-87 MOLDEX COMPACT PRE-FILTER

1010-007524 P-21 MULTIFUNCTIONAL PNEUMATIC GUN CRS 2100

4004-005020 P-91 NEOPRENE GLOVES PERFECT FIT SIZE L

4004-005021 P-91 NEOPRENE GLOVES PERFECT FIT SIZE XL

4004-004831 P-91 NITRILE GLOVES PERFECT FIT

5000-000001 P-10 NITRO PUTTY 1K

2004-002360 P-100 NYLON SANDING BLOCK

5002-001110 P-17 ONE STEP GLASS PRIMER

1008-001800 P-110 OPTIMUM LIGHT LAMP

1008-001801 P-110 OPTIMUM LIGHT STYLO

2004-004040 P-58 OX-EAR HAIR PAINT BRUSH Nº 0









2012-001422 P-56 PAINT PLASTIC CUP AND LID 1 L

2012-001423 P-56 PAINT PLASTIC CUP AND LID 1.8 L

2012-001421 P-56 PAINT PLASTIC CUP AND LID 500 ML


128

2004-085840 P-62 PAINT RUN REMOVER

2012-002390 P-57 PAPER MIXING CUP 600 ML

2006-070104 P-57 PAPER PAINT STRAINERS 125 MICRONS

2006-070103 P-57 PAPER PAINT STRAINERS 190 MICRONS

2011-001395 P-82 PAPER PROTECTING CARPET

1002-007120 P-102 PEAK NOZZLE FOR SODA BLASTING GUN

4004-002244 P-90 PERFECT CUTTING GLOVES SIZE M

4004-002245 P-90 PERFECT CUTTING GLOVES SIZE L

4004-002246 P-90 PERFECT CUTTING GLOVES SIZE XL

2001-002440 P-77 PERFECT FOAM “T”

1008-001811 P-117 PINCE FOR STAND FOR SMALL PARTS

1002-007122 P-102 PLANE NOZZLE FOR SODA BLASTING GUN

8010-000004 P-70 PLASTIC CARE 250 ML

8010-000005 P-70 PLASTIC CLEANER 75 ML

2001-003525 P-76 PLASTIC FILM WITH MASKING TAPE 35 CM x 25 M





2001-001330 P-76 PLASTIC FILM WITH MASKING TAPE 35 CM x 25 YDS





2006-002590 P-57 PLASTIC PAINT STRAINERS MESH 2000



2004-007099 P-101 PLATE 75 MM 3 HOLES

2004-001690 P-59 PLATES FOR PAINT SAMPLES

1010-001188 P-21 PNEUMATIC GUN CRS 4547

1013-000024 P-109 PNEUMATIC ROTATING ORBITAL SANDER CRS 7115

4004-000250 P-90 POLY GREY GLOVES SIZE M

4004-000251 P-90 POLY GREY GLOVES SIZE L

4004-000252 P-90 POLY GREY GLOVES SIZE XL

2009-010001 P-89 POLYESTER COVERALL SIZE M

2009-010002 P-89 POLYESTER COVERALL SIZE L

2009-010003 P-89 POLYESTER COVERALL SIZE XL

2009-010004 P-89 POLYESTER COVERALL SIZE XXL

2009-001005 P-89 POLYESTER WHITE COAT SIZE M

2009-001006 P-89 POLYESTER WHITE COAT SIZE L

2009-001007 P-89 POLYESTER WHITE COAT SIZE XL

2009-001008 P-89 POLYESTER WHITE COAT SIZE XXL

2003-001040 P-52 POLYTEX CRS

2002-003071 P-79 PRE-CUT LIFTING TAPE 10 MM x 10 M



2008-056250 P-20 PREFABRICATED PU CORD 8 MM x 16 M

2008-056260 P-20 PREFABRICATED PU CORD 10 MM x 16 M

2004-000002 P-52 PRESSURISED PULVERISER

2001-002490 P-77 PRIME PROTECT MASKING FOAM TAPE

2004-001160 P-17 PRIMER APPLICATOR

2008-056290 P-20 PRIMER CORDON PU

1002-000004 P-50 PROJECTION KIT CRS-PRO 2017 HVLP 1.2 MM

1002-000005 P-50 PROJECTION KIT CRS-PRO 2017 HVLP 1.3 MM

1002-000006 P-50 PROJECTION KIT CRS-PRO 2017 MP 1.2 MM

1002-000007 P-50 PROJECTION KIT CRS-PRO 2017 MP 1.3 MM

1002-000008 P-50 PROJECTION KIT CRS-PRO MP 1.7 MM

1002-000011 P-50 PROJECTION KIT CRS-PRO MP 2.5 MM


129

1002-000009 P-50 PROJECTION KIT TOUCH GUN CRS-PRO MINI 0.8 MM

1002-000010 P-50 PROJECTION KIT TOUCH GUN CRS-PRO MINI 1.0 MM

2011-001399 P-79 PROTECTOR FOR PARKING SENSORS 13 MM

2011-001398 P-79 PROTECTOR FOR PARKING SENSORS 18 MM

2008-056295 P-20 PU CORD APPLICATOR ROLLER

1002-000002 P-50 PVC CUP FOR CRS-PRO 2017 HVLP AND MP GUN

1002-000002 P-50 PVC CUP FOR CRS-PRO MP GUN FOR FILLER

5010-000002 P-63 QUARTZ 2500

5011-001069 P-45 QUICK 1K HIGH BUILDER DARK GREY

5011-001068 P-45 QUICK 1K HIGH BUILDER LIGHT GREY

5011-001070 P-45 QUICK 1K HIGH BUILDER WITE

5002-001108 P-17 QUICK ACTIV GLASS

5006-001091 P-32 QUICK ADHESION PROMOTER

5011-001056 P-45 QUICK BODYPRIMER HS DARK GREY

5011-001057 P-45 QUICK BODYPRIMER HS MEDIUM GREY

5011-001058 P-45 QUICK BODYPRIMER HS LIGHT GREY

5011-006021 P-48 QUICK CLEAR LACQUER GLOSS 500 ML

5011-006019 P-48 QUICK CLEAR LACQUER MATT 500 ML

5011-006020 P-48 QUICK CLEAR LACQUER SATIN 500 ML

5007-001089 P-33 QUICK CYAN ACTIVATOR 200 ML

5007-001088 P-33 QUICK CYAN 20 G

5012-001119 P-53 QUICK DUST CABIN 5 L

5003-001041 P-18 QUICK FILL BLACK

5003-001037 P-19 QUICK FILL BRUSH

5003-001042 P-18 QUICK FILL GREY

5003-001052 P-18 QUICK FILL WHITE

5003-001043 P-18 QUICK FLEX MS

5012-001070 P-53 QUICK GEL CABIN 5 L

5011-001077 P-20 QUICK GLUE

5013-001154 P-91 QUICK HAND CLEANER

5011-001117 P-36 QUICK HEATPROOF BLACK

5011-001116 P-36 QUICK HEATPROOF SILVER

5009-001194 P-49 QUICK HYDROCLEANER

5003-001045 P-18 QUICK METAL BONDING

5006-006029 P-29 QUICK MIX 4013

5006-001096 P-30 QUICK MIX EXPRESS 50 ML

1010-007525 P-30 QUICK MIX GUN

5006-001099 P-30 QUICK MIX MIXING TIP 50 ML

5006-001093 P-30 QUICK MIX UNIVERSEL 50 ML

5003-006038 P-18 QUICK MS ECO 965 BLACK

5003-006032 P-18 QUICK MS ECO 966 WHITE

5011-001054 P-36 QUICK PIERRE FUSIL 400 ML

5004-001083 P-32 QUICK PLAST-GEL BLACK 1000 ML

5004-001085 P-32 QUICK PLAST-GEL DARK GREY 1000 ML

5004-001106 P-32 QUICK PLASTIC PRIMER 400 ML

5004-001107 P-32 QUICK PLASTIC PRIMER 1000 ML

5010-001046 P-65 QUICK POLISH MOON 5 L

5010-001124 P-65 QUICK POLISH MOON 1 L

5002-001109 P-17 QUICK PRIMER GLASS

5012-000024 P-53 QUICK PRO-PEEL CABIN 5 L

5011-006039 P-36 QUICK RALLY GLOSS BLACK 500 ML

5004-006039 P-36 QUICK RALLY GLOSS BLACK 1000 ML

5011-006040 P-36 QUICK RALLY GLOSS WHITE 500 ML

5011-006023 P-36 QUICK RALLY MATT BLACK 500 ML

5004-006023 P-36 QUICK RALLY MATT BLACK 1000 ML

5011-006024 P-36 QUICK RALLY SATIN BLACK 500 ML

5004-006024 P-36 QUICK RALLY SATIN BLACK 1000 ML

5004-001047 P-31 QUICK RCOLOR BLACK


130

5004-001048 P-31 QUICK RCOLOR DARK GREY

5005-001137 P-32 QUICK RSTORE

5011-006022 P-103 QUICK SANDING CONTROL

5002-001062 P-16 QUICK SEAL

5002-001107 P-16 QUICK SEAL MS 974

5002-001045 P-16 QUICK SEAL PLUS

5008-001039 P-24 QUICK SHIELD 2K PU BEIGE + HARDENER

5008-001038 P-24 QUICK SHIELD 2K PU BLACK + HARDENER

5008-001055 P-24 QUICK SHIELD POLYMER BLACK

5008-001058 P-24 QUICK SHIELD POLYMER GREY

5008-001059 P-24 QUICK SHIELD POLYMER WHITE

5011-001156 P-47 QUICK SPOTBLENDER 1000 ML

5011-001155 P-47 QUICK SPOTBLENDER 400 ML

5004-001034 P-31 QUICK TEX BLACK 400 ML

5004-001035 P-31 QUICK TEX BLACK 1000 ML

5004-001049 P-31 QUICK TEX GREY 400 ML

5004-001050 P-31 QUICK TEX GREY 1000 ML

5008-001036 P-25 QUICK WAX 500 ML

5008-001066 P-25 QUICK WAX 1000 ML

5004-001136 P-37 QUICK WHEEL SILVER 500 ML

5011-001136 P-37 QUICK WHEEL SILVER 1000 ML

5011-001073 P-45 QUICK ZINC

5011-001075 P-45 QUICK ZINC-ALU

1013-000020 P-109 ROTATING ORBITAL SANDER GPS304 - Ø 5 MM

1013-000023 P-109 ROTATING ORBITAL SANDER GPS306 - Ø 2.5 MM

2004-002450 P-100 RUBBER SANDING BLOCK BLACK

2004-002040 P-100 RUBBER SANDING BLOCK BROWN

2004-002350 P-100 SANDING BLOCK CONCAVE

2004-001790 P-100 SANDING BLOCK PLANE

2004-001610 P-100 SANDING BLOCKS KIT

2004-002610 P-98SANDING PLANE WITH DUST EXTRACTION 70 MM x 125 MM





2011-001394 P-82 SEAT COVER

2004-001720 P-12 SET OF 4 METAL SPATULAS (50, 80, 100 and 200 MM)

2004-001620 P-12 SET OF 5 PLASTIC SPATULAS (5 x 100 MM)

2009-001680 P-88 SHOES COVER NON WOVEN

2009-002310 P-88 SHOES COVER PLASTIC PP

2009-002320 P-88 SHOES COVER TYVEK®

2014-006192 P-62 SKYFILM DISC 15 HOLES 35 MM P2000








1007-005001 P-110 SMART REPAIR KIT

9004-001072 P-110 SMART REPAIR PLATES 30 MM

9004-001071 P-110 SMART REPAIR PLATES 75 MM

1001-007102 P-102 SODA BLASTING GUN

2004-002540 P-101 SOFT INTERFACE 15/97 HOLES 5 MM

2004-002541 P-101 SOFT INTERFACE 15/97 HOLES 10 MM

2003-001010P-66

P-72SOFTEX

2005-006000 P-25 SOUNDPROOF SHEET

1016-010001 P-28 SP WELDING


131

1016-010004 P-28 SP WELDING MOBILE

1016-010003 P-28 SP WELDING POCKET

2004-001700 P-12 SPATULA CLEANER

2004-001701 P-12 SPATULA CLEANER FOR STAR BRITE

5012-001001 P-51 SPRAY GUN CLEANER 5 L

5012-001000 P-51 SPRAY GUN CLEANER 25 L

2004-003020 P-51 SPRAY GUN CLEANER KIT

2004-001813 P-117 STAND FOR DISMANTLED PARTS

1016-010016 P-28 STAPLES SPW16

1016-010018 P-28 STAPLES SPW18

1016-010026 P-28 STAPLES SPW26

1016-010028 P-28 STAPLES SPW28

1016-010038 P-28 STAPLES SPW38

1016-010047 P-28 STAPLES SPW47

1016-010068 P-28 STAPLES SPW68

1016-010078 P-28 STAPLES SPW78

1016-010088 P-28 STAPLES SPW88

1016-010099 P-28 STAPLES SPW99

2007-001100 P-97 STAR BRITE DISC 150 MM GREY ULTRAFINE

2007-001110 P-97 STAR BRITE DISC 150 MM RED VERY FINE

2007-001120 P-97 STAR BRITE ROLL 150 MM x 10 M GREY ULTRAFINE

2007-001125 P-97 STAR BRITE ROLL 150 MM x 10 M RED VERY FINE

2007-001080 P-97 STAR BRITE SHEET 150 MM X 250 MM GREY ULTRAFINE

2007-001090 P-97 STAR BRITE SHEET 150 MM X 250 MM RED VERY FINE

5009-001021 P-46 STAR LACK CLEAR COAT HS 4050 PLUS 1 L

5009-001022 P-46 STAR LACK CLEAR COAT HS 4050 PLUS 5 L

5009-001195 P-46 STAR LACK CLEAR COAT HS LVC 4020 5 L

5009-001116 P-46 STAR LACK CLEAR COAT UHS 4000 1 L

5009-001110 P-46 STAR LACK CLEAR COAT UHS 4000 5 L

5009-001114 P-47 STAR LACK EXPRESS CLEAR COAT

5009-001115 P-47 STAR LACK EXPRESS HARDENER

5009-001197 P-46 STAR LACK HARDENER HS LVC 1020 FAST 2.5 L

5009-001198 P-46 STAR LACK HARDENER HS LVC 1030 STANDARD 2.5 L

5009-001199 P-46 STAR LACK HARDENER HS LVC 1040 SLOW 2.5 L

5009-001111 P-46 STAR LACK HARDENER UHS AND HS 1000 FAST 2.5 L

5009-001117 P-46 STAR LACK HARDENER UHS AND HS 2000 STANDARD 0.5 L

5009-001112 P-46 STAR LACK HARDENER UHS AND HS 2000 STANDARD 2.5 L

5009-001113 P-46 STAR LACK HARDENER UHS AND HS 3000 SLOW 2.5 L

5009-001118 P-46 STAR LACK HARDENER UHS AND HS 1000 FAST 0.5 L

5009-001005 P-37 STAR LACK THERMO CERAMIC CLEAR COAT 1 L

5009-001006 P-37 STAR LACK THERMO CERAMIC HARDENER 500 ML

5009-001002 P-48 STARLIGHT HARDENER 500 ML

5009-001001 P-48 STARLIGHT POLYESTER 1 L

5009-001300 P-47 STARMATE CLEAR COAT

5009-001302 P-47 STARMATE HARDENER FAST 500 ML

5009-001301 P-47 STARMATE HARDENER STANDARD 500 ML

2011-001392 P-82 STEERING WHEEL COVER

5008-001042 P-24 STONE CHIP PROTECTION KS-2000 BLACK

5008-001053 P-24 STONE CHIP PROTECTION KS-2000 GREY

5008-001054 P-24 STONE CHIP PROTECTION KS-2000 WHITE

5008-001043 P-24 STONE CHIP PROTECTION WB BLACK

5008-001044 P-24 STONE CHIP PROTECTION WB GREY

1009-007520 P-25 STONE CHIP QS 2K GUN

1009-007519P-25

P-116STONE CHIP STANDARD GUN

5015-000002 P-102 STRIPPING GEL 5 KG

5015-000001 P-102 STRIPPING GEL 1 KG

2002-003080 P-79 STRIPPING TAPE

1007-007530P-104

P-110STRIPPING TOOL CRS


132

2004-001811 P-117 STAND FOR SMALL PARTS

2003-001030 P-52 TACK RAG

2003-002550 P-52 TACK RAG SPECIAL WATER-BASED PAINT

2001-001585P-31

P-80TEXTURED ADHESIVE PLASTIC

5009-001018 P-49 THINNER UNIVERSAL CARS SLOW 1 L

5009-001016 P-49 THINNER UNIVERSAL CARS SLOW 5 L

5009-001019 P-49 THINNER UNIVERSAL CARS STANDARD 1 L

5009-001020 P-49 THINNER UNIVERSAL CARS STANDARD 5 L

1009-003090 P-25 TIP FOR STONE CHIP GUN 1000 ML

1009-007521 P-25 TIP FOR STONE CHIP QS 2K GUN

8010-000009 P-71 TIRE SHINE 250 ML

2002-007020 P-78 "TOP" MASKING TAPE 18 MM x 45 M




2010-001714 P-91 TOP PRO GLOVES SIZE M

2010-001715 P-91 TOP PRO GLOVES SIZE L

2010-001716 P-91 TOP PRO GLOVES SIZE XL

1001-000004 P-50 TOUCH GUN CRS-PRO MINI 2017 1.0 MM

2001-002450 P-77 TRIANGULAR MASKING FOAM TAPE

2004-002542 P-101 TWISTER INTERFACE PROTECTOR 15/97

2004-002700 P-101 TWISTER PLATE 15/97 150 MM HARD

2004-002701 P-101 TWISTER PLATE 15/97 150 MM MEDIUM

2009-000090 P-89 TYVEK PRO-TECH® COVERALL SIZE M

2009-000100 P-89 TYVEK PRO-TECH® COVERALL SIZE L

2009-000120 P-89 TYVEK PRO-TECH® COVERALL SIZE XXL

2009-000110 P-89 TYVEK PRO-TECH® COVERALL SIZE XL

2006-001040 P-59 UNIVERSAL SUCTION FILTER MEDIUM

4001-001619 P-87 VALUAIR PLUS FILTER (BAYONET / A1)

4001-001583 P-87 VALUAIR PLUS FILTER (BAYONET / A2P3)

4001-001590 P-87 VALUAIR PLUS FILTER RETAINER

4001-001573 P-87 VALUAIR PLUS MASK

4001-002800 P-87 VALUAIR PLUS PRE-FILTER P1

4001-002801 P-87 VALUAIR PLUS PRE-FILTER P2

1011-001185 P-116 VENTURI AIR GUN

4002-006193 P-88 V-MAXX GLASSES

4002-006437 P-88 V-MAXX LENS PROTECTIVE FILM

8010-000008 P-71 WHEEL CLEANER EXTRA STRONG 500 ML

2001-001410 P-81 WHEEL COVER-PLASTIC

2001-002370 P-81 WHEEL COVER-PP

2011-001397 P-81 WHEEL RIM PROTECTOR FOR PAINTING

2004-001540 P-12 WHITE RUBBER SPATULAS

2004-000101 P-63 WOOL PAD DIAMOND 1500

2010-002491 P-90 WORKEASY BLACK GLOVES SIZE M

2010-002492 P-90 WORKEASY BLACK GLOVES SIZE L

2010-002493 P-90 WORKEASY BLACK GLOVES SIZE XL

2001-002480 P-77 2 IN 1 MASKING FOAM TAPE

Polígono Industrial 2 de Octubre,Calle José Muñoz, 618230 Santa Fe. (Granada) · ESPAÑATel. (+34) 902 180 470 · Fax. (+34) 902 180 [email protected]

5 Chemin Du Moulin84350 Courthezon · FRANCETel. (+33) (0) 141 735 438 · Fax. (+33) (0) 141 735 [email protected]

Ribeira de Eiras, Adémia3020 · 326 Coimbra · PORTUGALTel. (+351) 239 433 720 · Fax. (+351) 239 433 [email protected]

Via Campazzi, 2321040 Gerenzano (Varese) · ITALIATel. (+39) (0) 2 968 9862 · Fax. (+39) (0) 2 964 [email protected]

127, Rue Zoubeir Ibnou Al AouameRésidence Dounia, Quartier Des Roches Noires20290 Casablanca · MAROCTél. (+212) (0) 522 247 811 · Fax. (+212) (0) 522 247 [email protected]

[quality] for - car repair system...polyester filler with a high-density content of aluminium that...

Documents