QUANZHOU SEASUNSTAR CRAFT CO.,LTD.

Fountain Process（ Material: Polyresin）

Drawing Design:

Carving:

→

The new sculptures are generally based on the drawing designs.

Material: Black mud, Gesso

→

Carving:Sometimes ,our engineers finish the new sculpture according to some material, things such as bark , wood ,stone ,animal etc.

←↙

The board and bucket are made of gesso.

The pipe is real, not sculptural.

→

↑The base and shoes are made of black mud. It makes the sculpture more natural than using gesso.

Opening Mold:

The mold sample

→ →

↓

Pour the slurry of Silica gel and brush.

←←

Paste the fiberglass on the mold sample.

Material: Polyfoam, The slurry of silica gel ,The slurry of polyresin , Yellow mud ,Fiberglass.

Opening Mold:Pour, brush and paste again.

→ →

↓

←

Then brush the slurry of polyresin.

Remove the partial polyfoam. Repeat the above steps.

Opening Mold:

→

→

The mold is OK.

Shaping：

→

One mold consists of two parts.

Join the two parts of the mold.

←

Material: Slurry of Poly resin

Check the mold and make sure the mold is good for production

→

Fix two parts tight with screws.

○

→

Pour the slurry of poly resin into the mold

○

Roll the mold to make the slurry cover the whole silica mold.

Shaping：

→

After rolling, need 15 minutes for the slurry to solidify.

Open the mold and remove the silica mold from the shaped product

→→

Shaped product

Grinding ,Drilling and Trimming:

→

←

Washing and Steeping :

→

Mending:

Makes the mold line smooth and natural after trimming.

Mending:Before Mending After Mending

Painting:Spraying

Painting:Brushing

Testing:(1) Water leakage test (2) Function testing

Testing:

＼□Use paper to test the splash. If splash is too much, test fail, then product needs to be re-worked.

( Dry paper )

(Testing time: 24 hours)Water flow testing

Testing:

The good testing.

□←

Water flow testing

Packaging:

→

□□

Pump/Transformer Instruction manualPlace the Pump ， Transformer ，Product Instruction in related space.

→ →