quattro column formwork designed for moving with …a200e220-cc57-4e87... · column formwork...
TRANSCRIPT
QUATTROColumn formwork designed for moving with only one crane lift
Buch 2.indb 1 05.09.13 11:27
Important Notes
Without exception, all current safety regulations and guidelines must be observed in those countries where our products are used.
The photos shown in this brochure feature construction sites in progress. For this reason, safety and anchor details in particular cannot always be considered as conclusive or final. These are subject to the risk assess-ment carried out by the contractor.
Safety instructions and load specifications are to be strictly observed at all times. Separate structural calcu-lations are required for any deviations from the stand-ard design data.
The information contained herein is subject to technical changes in the interests of progress. Errors and typo-graphical mistakes reserved.
Edition 08 l 2013
PERI GmbHFormwork Scaffolding EngineeringP.O. Box 126489259 WeissenhornGermanyTel. +49 (0)7309.950- 0Fax +49 (0)7309.951- [email protected]
Buch 2.indb 2 05.09.13 11:27
1
Content
QUATTRO 3 Column formwork designed for moving with only one
crane lift
Time-saving 4 Moveable as a complete unit, quickly braced and separated
Variable 5 Square or rectangular cross-sections from 20 cm x 20 cm
to 60 cm x 60 cm
Safe 6 Through the concreting platform with integrated access
ladder and ladder cage
High Quality 7 Powder-coated formwork, best concreting results
8 Components
EN_QUATTRO_2013_00-01.indd 3 05.09.13 11:33
Buch 2.indb 2 05.09.13 11:28
33
QUATTROColumn formwork designed for moving with only one crane lift
■ Time-saving Moveable as a complete unit, can be opened and closed with a
minimum of effort.■ Variable Regardless whether square or rectangular-shaped, cross-sections
from 20 cm x 20 cm to 60 cm x 60 cm in 5 cm increments.■ Safe Through the concreting platform with integrated access ladder
and ladder cage.
QUATTRO is equipped with all-plastic formlining which ensures a very good concreting fi nish.
For contractors, PERI QUATTRO means enormous time-savings when using the crane because the complete column including the push-pull props and con-creting platform is moved in only one crane lift. If necessary, QUATTRO can be moved by hand using the transportation wheels. QUATTRO is suitable for square or rectangular cross-sections with edge lengths from 20 cm to 60 cm. With four different element heights, height adjust-ments up to 4.50 m in 25 cm increments are possible.
The permissible fresh concrete pressure of 80 kN/m² allows the customary high concreting speeds when forming the columns. The high-grade plastic formlin-ing is screwed on from the rear resulting in an excellent architectural concrete quality fi nish.
Buch 2.indb 3 05.09.13 11:28
4
Time-savingMoveable as a complete unit, quickly braced and separated
PERI QUATTRO column formwork can be moved as a complete unit, including the push-pull props and concreting plat-form, in only one crane lift. Alternatively, the unit can be moved by hand using four transportation wheels per column.
Shuttering and striking are also carried out easily and quickly: elements are braced and separated in just a few sim-ple steps – all required components are directly fixed to the column formwork.
The frame must be secured in the “hold-open position” by means of an additional bolt.
Formwork up to a max. height of 3.50 m may be moved by means of the transportation wheels. For this, four transportation wheels are to be mounted on the closed formwork unit.
The formwork can then be attached to the crane lifting gear and moved to the next place of use.
Buch 2.indb 4 05.09.13 11:29
5
VariableSquare or rectangular cross-sections from 20 x 20 mm to 60 x 60 cm
With QUATTRO, square or rectangular-shaped column cross-sections from 20 cm x 20 cm to 60 cm x 60 cm can be realised in 5 cm increments.With 4 different element heights of 0.50 m, 1.25 m, 2.75 m and 3.50 m, height adjus tments are possible in 25-cm increments up to 4.50 m. In addition, elements can easily be connected by means of ring bolts which also serve as crane suspension.
The individual elements are connected using ring bolts.
Eye bolt for crane
Eye bolt for extending panels
Chamfer Strip QDLChamfer Strip QDL
Chamfer Strip QDL
Frame Spanner QUATTRO
Frame Spanner QUATTRO
Frame Spanner QUATTRO
60 x 60
20 x 20 50 x 20
Buch 2.indb 5 05.09.13 11:29
6
SafeThrough the concreting platform with integrated access ladder and ladder cage
The aluminium platform suits any layout from 20 cm x 20 cm to 60 cm x 60 cm. Thanks to its low weight, it can easily be assembled by hand. Another advantage is that the mounting of the concreting platform also serves as the crane sus-pension.
The PERI concreting platform is deliv-ered to the construction site ready for use. There are no individual components which can be lost and no time-consum-ing assembly of individual scaffold brackets, planking or handrail boards.
Integrated ladders serve to ensure safe access to the concreting platforms. This consists of a ladder cage, access ladder, ladder connection and ladder hooks. Once installed, they are moved as a com-plete unit together with the formwork.
Ladder Safety Cage 150
Ladder Safety Cage 75
Ladder 180/6 End Ladder 180/2
Buch 2.indb 6 05.09.13 11:29
7
High qualityPowder-coated formwork, best concreting results
QUATTRO column formwork is provided with high-quality powder coating.
With the high-quality formlining that is screwed on from the rear, excellent architectural concrete finishes can be achieved with QUATTRO.
For storage and transportation, the four elements are placed one on top of the other in a stack – extremely compact thanks to the stacking height of only 12 cm.
The frames of the QUATTRO column formwork are powder-coated. This reliably prevents the concrete from sticking and guarantees easy cleaning.
Due to the high-grade plastic formlining being screwed on from the rear, a good architectural concrete finish is achieved – no nail or screw markings. * The maximum permissible fresh con-crete pressure for QUATTRO column formwork is 80 kN/m² and has been de-signed to accommodate high concreting speeds which are customary when forming columns.
*with new plywood and without height extensions.
1212
1212
Buch 2.indb 7 05.09.13 11:29
QUATTRO Column Formwork
8
Item no. Weight kg
109925 158,000 QUATTRO Frame QES 275Column panel with 20 mm plywood, screwed on from behind. For cross-sections in 5 cm incre-ments from 20 x 20 cm to 60 x 60 cm. Eye bolt as load-bearing point and for extensions. Without chamfer strip.
Complete with2 pc. 724812 Stair Tower Eye Bolt M20 x 110, galv.2 pc. 710045 Nut DIN 557-4 M20, galv.9 pc. 105400 Pin Ø 20 x 140, galv.9 pc. 018060 Cotter Pin 4/1, galv.1 pc. 037550 Base Plate QUATTRO QBTechnical DataLoad-bearing point capacity 1.0 t.
725
2750
109926 206,000 QUATTRO Frame QES 350Column panel with 20 mm plywood, screwed on from behind. For cross-sections in 5 cm incre-ments from 20 x 20 cm to 60 x 60 cm. Eye bolt as load-bearing point and for extensions. Without chamfer strip.
Complete with2 pc. 724812 Stair Tower Eye Bolt M20 x 110, galv.2 pc. 710045 Nut DIN 557-4 M20, galv.13 pc. 105400 Pin Ø 20 x 140, galv.13 pc. 018060 Cotter Pin 4/1, galv.1 pc. 037550 Base Plate QUATTRO QBTechnical DataLoad-bearing point capacity 1.0 t.
3500
693
835725
725
Buch 1.indb 1 05.09.13 12:37
QUATTRO Column Formwork
9
Item no. Weight kg
037550 3,240 Base Plate QUATTRO QBFor protecting the plywood formlining against damage.
Complete with2 pc. 030130 Cam Nut DW 15, galv.
725
530
80
1003°
DW 15
105448037610037600037590
0,665 0,520 0,230 0,100
Chamfer Strips QDLChamfer Strip QDL 350Chamfer Strip QDL 275Chamfer Strip QDL 125Chamfer Strip QDL 50Plastic chamfer strip with nailing panel. Edge length 15 x 15 mm.
L 3500 2750 1250 500
L 2015
2,7
15
109923 32,300 QUATTRO Frame QES 50Column panel with 20 mm plywood, screwed on from behind. For cross-sections in 5 cm incre-ments from 20 x 20 cm to 60 x 60 cm. Eye bolt as load-bearing point and for extensions. Without chamfer strip.
Complete with2 pc. 724812 Stair Tower Eye Bolt M20 x 110, galv.2 pc. 710045 Nut DIN 557-4 M20, galv.2 pc. 105400 Pin Ø 20 x 140, galv.2 pc. 018060 Cotter Pin 4/1, galv.Technical DataLoad-bearing point capacity 1.0 t.
500
725
109924 73,800 QUATTRO Frame QES 125Column panel with 20 mm plywood, screwed on from behind. For cross-sections in 5 cm incre-ments from 20 x 20 cm to 60 x 60 cm. Eye bolt as load-bearing point and for extensions. Without chamfer strip.
Complete with2 pc. 724812 Stair Tower Eye Bolt M20 x 110, galv.2 pc. 710045 Nut DIN 557-4 M20, galv.5 pc. 105400 Pin Ø 20 x 140, galv.5 pc. 018060 Cotter Pin 4/1, galv.Technical DataLoad-bearing point capacity 1.0 t.
1250
725
Buch 1.indb 2 05.09.13 12:38
QUATTRO Column Formwork
10
Item no. Weight kg
018060 0,030 Cotter Pin 4/1, galv.
Ø4
105400 0,330 Pin Ø 20 x 140, galv.For different connections.
89140
Ø8
Ø20
018060 0,030AccessoriesCotter Pin 4/1, galv.
724500 0,098 Bolt Ø 20 x 42, QUATTRO, galv.For different connections.
42
20Ø5
018060 0,030AccessoriesCotter Pin 4/1, galv.
037530 1,140 Brace Connector QUATTRO QRFor connecting push-pull props and kickers to QUATTRO and LICO panels.
Complete with1 pc. 027170 Bolt Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.
155
24 93
037540 2,370 Frame Spanner QUATTRO QAFor bracing QUATTRO column elements. Only required at a column corner.
NoteRequired no. of pieces:h = 3.50 m 6 pieces, h = 2.75 m 4 piecesh = 1.25 m 2 pieces, h = 0.50 m 1 piece
5745
89
249
195
Ø21DW 15
Buch 1.indb 3 05.09.13 12:38
QUATTRO Column Formwork
11
Item no. Weight kg
037410 51,400 Concreting Landing, AluAdjusts continuously to all column cross-sections up to max. 60 x 60 cm. Attachment is carried out using the crane eye of the concreting platform.
Technical DataPermissible load 150 kg/m2.
14201524
710
840
620
1524Ø21
Ø14
130
037400 123,000 Concreting Platform, compl.Working and concreting platform for TRIO, RAPID and QUATTRO Column Formwork.
Complete with1 pc. 037410 Concreting Landing, Alu2 pc. 037420 Platform Guardrail 52, galv.2 pc. 037430 Platform Guardrail 134, galv.3 pc. 037440 Crane Hook Concreting Platform
1521
1521
105791 16,900 Transportation Wheel QUATTROFor moving completely assembled QUATTRO column formwork. Always use 4 pieces per column.
Technical DataBearing capacity 500 kg.
642
464 135
Buch 1.indb 4 05.09.13 12:38
QUATTRO Column Formwork
12
Item no. Weight kg
037440 5,660 Crane Hook Concreting PlatformFor assembling the concreting landing to the RAPID and QUATTRO column frames.
Technical DataLoad-bearing point: capacity 1.0 t.
250
508
137
DW 1570
120
115352 15,100 Platform Front Guardrail 86/86As guardrail for PERI concreting platforms towards the column. Mounted with Screw-on Coupler.
NoteWrench size SW 19.
824
115099
4
037430 17,100 Platform Guardrail 134, galv.As guardrail for PERI Concreting Platforms. Locks in place automatically.
1340 50
150
1005
1305
037420 10,200 Platform Guardrail 52, galv.As guardrail for PERI Concreting Platforms. Locks in place automatically.
1005
1305
525
150
50
Buch 1.indb 5 05.09.13 12:38
QUATTRO Column Formwork
13
Item no. Weight kg
103718 0,684 Ladder Hook, galv.For adjusting the bottom ladder. Always use in pairs.
Complete with2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv.2 pc. 710381 Nut ISO 7042 M12-8, galv.
330 SW 19
051460 2,180 Ladder Base, galv.As bottom ladder connection and for securing ladders against sliding on the scaffold decks.
405
210
50
103724 10,400 End Ladder 180/2, galv.As access for PERI formwork systems.
Complete with4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv.4 pc. 710381 Nut ISO 7042 M12-8, galv.
298 12001885
450
051410 11,700 Ladder 180/6, galv.As access for PERI formwork systems.
Complete with4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv.4 pc. 710381 Nut ISO 7042 M12-8, galv.
14905 x 298 = 831960
450
SW 19
Buch 1.indb 6 05.09.13 12:38
QUATTRO Column Formwork
14
Item no. Weight kg
118238 12,100 Push-Pull Prop RS 260, galv. Extension length L = 2.30 – 2.60 m. For aligning PERI formwork systems and precast concrete elements.
NotePermissible load see PERI Design Tables.
min 2300 max 2600
60,6
Ø2178Ø21
9
Ø17
Ø48,3
117466 10,600 Push-Pull Prop RS 210, galv. Extension length L = 1.30 – 2.10 m. For aligning PERI formwork systems and precast concrete elements.
NotePermissible load see PERI Design Tables.
1300min max 2100
Ø211178
60,6
Ø
9
Ø17
Ø48,3
104132051450
15,600 25,200
Ladder Safety Cages, galv. Ladder Safety Cage 75, galv.Ladder Safety Cage 150, galv.Ladder safety cage for PERI access ladders.
Complete with4 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv.4 pc. 701763 Clamping Plate Fl 25 x 10 x 90
750
/150
0
710
704
SW 19
103391 4,890 Ladder Connector QUATTROFor connecting ladders to QUATTRO column panels.
Complete with2 pc. 701763 Clamping Plate Fl 25 x 10 x 902 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv.
750
453
260
160
Buch 1.indb 7 05.09.13 12:38
QUATTRO Column Formwork
15
Item no. Weight kg
028990 115,000 Push-Pull Prop RS 1000, galv.Extension length L = 6.40 – 10.00 m. For aligning PERI formwork systems.
NotePermissible load see PERI Design Tables.
min 6325 max 10000
10
102
Ø
Ø21
Ø48,3
Ø21
Ø17
117469 39,900 Push-Pull Prop RS 650, galv. Extension length L = 4.30 – 6.50 m. For aligning PERI formwork systems and precast concrete elements.
NotePermissible load see PERI Design Tables.
4300min max 6500
88,9
Ø4140Ø21
Ø48,3
Ø17
117468 22,900 Push-Pull Prop RS 450, galv. Extension length L = 2.80 – 4.50 m. For aligning PERI formwork systems and precast concrete elements.
NotePermissible load see PERI Design Tables.
min 2800 max 4500
2670
73ØØ21
Ø48,3
Ø17
9
117467 15,400 Push-Pull Prop RS 300, galv. Extension length L = 1.90 – 3.00 m. For aligning PERI formwork systems and precast concrete elements.
NotePermissible load see PERI Design Tables.
min 1900 max 3000
1773
64,5
Ø
Ø21
Ø48,3
9
Ø17
Buch 1.indb 8 05.09.13 12:39
QUATTRO Column Formwork
16
Item no. Weight kg
028010 18,000 Push-Pull Prop RSS IExtension length L = 2.05 – 2.94 m. For aligning PERI formwork systems.
NotePermissible load: see PERI Design Tables.
2050min max 2940
1915Ø16,5
10
Ø32
70Ø
117343 3,250 Base Plate-2 for RS 210 – 1400, galv.For assembly of Push-Pull Props RS 210, 260, 300, 450, 650, 1000 and 1400.
Complete with2 pc. 105400 Pin Ø 20 x 140, galv.2 pc. 018060 Cotter Pin 4/1, galv.
261
106
5264
Ø21
124777 0,210AccessoriesAnchor Bolt PERI 14/20 x 130
103800 271,000 Push-Pull Prop RS 1400, galv.Extension length L = 6.40 – 14.00 m. For aligning PERI formwork systems.
NotePermissible load see PERI Design Tables. Chain can be operated from bottom.
6400min max 14000
6290
400020 x 200 = 400020 x 200 =
Ø48,3
Ø21 Ø21Ø17
Ø48,3
10
Buch 1.indb 9 05.09.13 12:39
QUATTRO Column Formwork
17
Item no. Weight kg
028110 5,180 Kicker AV 140Extension length L = 1.08 – 1.40 m. For aligning PERI formwork systems.
Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.NotePermissible load: see PERI Design Tables.
min 1080 max 1400
980Ø16x42 Ø16,5
1010
Ø30
38Ø
106000 1,820 Base Plate-2 for RSS, galv.For assembly of RSS push-pull props.
Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.
150
Ø21
Ø11
100 1285
124777 0,210AccessoriesAnchor Bolt PERI 14/20 x 130
028030 38,400 Push-Pull Prop RSS IIIExtension length L = 4.60 – 6.00 m. For aligning PERI formwork systems.
NotePermissible load: see PERI Design Tables.
min 4600 max 6000
439916,5 16,5
Ø48,3
915
82,5
Ø
028020 22,100 Push-Pull Prop RSS IIExtension length L = 2.91 – 3.80 m. For aligning PERI formwork systems.
NotePermissible load: see PERI Design Tables.
min 2910 max 3800
Ø16,5Ø16,52775
Ø32
10
70Ø
15
Buch 1.indb 10 05.09.13 12:39
QUATTRO Column Formwork
18
Item no. Weight kg
124777 0,210 Anchor Bolt PERI 14/20 x 130For temporary fixation to reinforced concrete structures.
NoteWrench size SW 24.Drilling Ø 14 mm.Technical DataSee PERI data sheet!
130
SW 24Ø14
028120 16,900 Kicker AV RSS IIIExtension length L = 2.03 – 2.92 m. For aligning PERI formwork systems.
Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.NotePermissible load: see PERI Design Tables.
min 2030 max 2920
1915Ø16x42 Ø16,5
Ø32
10 10
70Ø
108135 12,900 Kicker AV 210Extension length L = 1.28 – 2.10 m. For aligning PERI formwork systems.
Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.NotePermissible load: see PERI Design Tables.
min 1280 max 2100
Ø16x42 Ø16,5
Ø36
70Ø
1171
1010
Buch 1.indb 11 05.09.13 12:39
19
0013.indd 12 05.09.13 12:46
2
1
3
4
5
6
9
11
12
1316
17
18
19
20
22
21
24
2829
30
32
33
34
38
41
42
46
48
52
44
53
60
20
02 PERI S.A.S. 77109 Meaux Cedex [email protected] www.peri.fr
03 PERI AG 8472 Ohringen [email protected] www.peri.ch
04 PERI S.A.U. 28110 Algete - Madrid [email protected] www.peri.es
05 N.V. PERI S.A. 1840 Londerzeel [email protected] www.peri.be
06 PERI Holding B.V. 5480 AH-Schijndel [email protected] www.peri.nl
07 PERI Formwork Systems, Inc. Elkridge, MD 21075 [email protected] www.peri-usa.com
08 PT Beton Perkasa Wijaksana Jakarta 10210 [email protected] www.peri.com
09 PERI S.p.A. 20060 Basiano [email protected] www.peri.it
10 PERI Japan K.K.
Tokyo 103-0015 [email protected] www.perijapan.jp
11 PERI Ltd. Rugby, CV23 0AN [email protected] www.peri.ltd.uk
12 PERI Kalip ve Iskeleleri Sanayi ve Ticaret Ltd. Esenyurt / İstanbul 34510 [email protected] www.peri.com.tr
13 PERI Kft. 1181 Budapest [email protected] www.peri.hu
14 PERI Formwork Malaysia Sdn. Bhd. 43300 Seri Kembangan, Selangor Darul Ehsan [email protected] www.perimalaysia.com
15 PERI ASIA Pte. Ltd Singapore 387355 [email protected] www.periasia.com
16 PERI Ges.mbH 3134 Nußdorf ob der Traisen [email protected] www.peri.at
17 PERI spol. S r.o. 252 42 Jesenice u Prahy [email protected] www.peri.cz
18 PERI Danmark A/S 2670 Greve [email protected] www.peri.dk
19 PERI Suomi Ltd. Oy 05460 Hyvinkää [email protected] www.perisuomi.fi
20 PERI Norge AS 3036 Drammen [email protected] www.peri.no
21 PERI Polska Sp. z o.o. 05-860 Płochocin [email protected] www.peri.com.pl
22 PERIform Sverige AB 30262 Halmstad [email protected] www.periform.se
23 PERI (Korea) Ltd. Seoul 135-936 [email protected] www.perikorea.com
24 Pericofragens Lda. 2790-326 Queijas [email protected] www.peri.pt
25 PERI S.A. B1625GPA Escobar – Bs. As. [email protected] www.peri.com.ar
26 PERI Formas e Escoramentos Ltda. Vargem Grande Paulista – SP [email protected] www.peribrasil.com.br
27 PERI Chile Ltda. Colina, Santiago de Chile [email protected] www.peri.cl
28 PERI România SRL 077015 Baloteşti [email protected] www.peri.ro
29 PERI Agency 2000 Maribor [email protected] www.peri.com
30 PERI spol. s. r.o. 903 01 Senec [email protected] www.peri.sk
31 PERI Australia Pty. Ltd. Glendenning NSW 2761 [email protected] www.periaus.com.au
32 PERI AS 76406 Saku vald Harjumaa [email protected] www.peri.ee
33 PERI Hellas Solely Owned Ltd. 194 00 Koropi [email protected] www.perihellas.gr
34 PERI SIA 2118 Salaspils novads, Rigas rajons [email protected] www.peri-latvija.lv
35 PERI (L.L.C.) Dubai U.A.E. [email protected] www.perime.com
36 PERI Formwork Systems, Inc. Bolton, ON – L7E 1K1 [email protected] www.peri.ca
01 Germany PERI GmbH Rudolf-Diesel-Strasse 89264 Weissenhorn [email protected] www.peri.com
France
Switzerland
Spain
Belgium/Luxembourg
Netherlands
USA
Indonesia
Italy
Japan
United Kingdom/Ireland
Turkey
Hungary
Malaysia
Singapore
Austria
Czech Republic
Denmark
Finland
Norway
Poland
Sweden
Korea
Portugal
Argentina
Brazil
Chile
Romania
Slovania
Slovakia
Australia
Estonia
Greece
Latvia
United Arab Emirates
Canada
PERI International
PERI_International_2013.indd 20 10.09.13 20:39
8
10
1415
23
31
35
3739 40
43
44
45
47
50 51
585457
5660 55
64
63
65
7
25
26
66
27
36
49
61
62
21
37 PERI Representative Office 90416 – Jdeideh [email protected] www.peri.com
38 PERI UAB 02300 Vilnius [email protected] www.peri.lt
39 PERI S.A.U. Tanger [email protected] www.peri.com
40 PERI Formwork Engineering Ltd. Rosh Ha‘ayin, 48104 [email protected] www.peri.co.il
41 PERI Bulgaria EOOD 1839 Sofia [email protected] www.peri.bg
42 Armar ehf. 220 Hafnarfjörður [email protected] www.armar.is
43 TOO PERI Kazakhstan 050000 Almaty [email protected] www.peri.kz
44 OOO PERI 142407, Noginsk District [email protected] www.peri.ru
45 PERI (Pty) Ltd 7600 Stellenbosch [email protected] www.peri.co.za
46 PERI Ukraina 07400 Brovary [email protected] www.peri.ua
47 Egypt Branch Office 11341 Nasr City /Cairo [email protected] www.peri.com.eg
48 PERI – Oplate d.o.o. 22310 Šimanovci [email protected] www.peri.rs
49 PERI Cimbras y Andamios, S.A. de C.V. Estado de México, Huehuetoca [email protected] www.peri.com.mx
50 PERI Repesentative Office Baku [email protected] www.peri.com.tr
51 PERI Kalıp ve İskeleleri Aşgabat [email protected] www.peri.com.tr
52 IOOO PERI Belarus 220100 Minsk [email protected] www.peri.by
53 PERI oplate i skele d.o.o. 10 250 Luöko-Zagreb [email protected] www.peri.com.hr
54 PERI (India) Pvt Ltd Mumbai – 400064 [email protected] www.peri.in
55 PERI GmbH - Jordan 11947 Amman [email protected] www.peri.com
56 PERI Kuwait Company WLL 13011 Kuwait [email protected] www.peri.com
57 PERI Saudi Arabia Com. Ltd. 21463 Jeddah [email protected] www.peri.com.sa
58 PERI Qatar LLC P.O.Box: 31295 - Doha [email protected] www.periqatar.com
59 Sarl PERI Kouba 16092, Alger [email protected] www.peri.com
60 PERI formwork and scaffolding Sh.p.k. Tirane [email protected] www.peri.com.tr
61 PERI Peruana S.A.C. Villa El Salvador, Lima [email protected] www.peri.com.pe
62 PERI Panama Inc. 0832-00155 Panama City [email protected] www.peri.com.pa
63 Pericofragens, Lda. Luanda [email protected] www.peri.pt
64 Heights Access Nigeria Ltd. Victoria Island, Lagos [email protected] www. heightsaccessng.com 65 PERI (L.L.C.) Muscat [email protected] www.perime.com
66 PERI S.A.S. Colombia Chapinero Alto, Bogotá [email protected] www.peri.com.co
Lebanon
Lithuania
Morocco
Israel
Bulgaria
Iceland
Kazakhstan
Russian Federation
South Africa
Ukraine
Egypt
Serbia
Mexico
Azerbaijan
Turkmenistan
Belorussia
Croatia
India
Jordan
Kuwait
Saudi Arabia
Qatar
Algeria
Albania
Peru
Panama
Angola
Nigeria
Oman
Colombia
PERI_International_2013.indd 21 10.09.13 20:39
The optimal System for every Project and every Requirement
PERI GmbHFormwork Scaffolding EngineeringP.O. Box 126489259 WeissenhornGermanyTel. +49 (0)7309.950-0Fax +49 (0)[email protected]
System-Independent Accessories
Wall Formwork Column Formwork
Slab Formwork Climbing Systems Tunnel Formwork Bridge Formwork
Shoring Systems Facade ScaffoldConstruction Scaffold Industrial Scaffold
Access Protection Scaffold Services
DE
en 0
9 | 2
013
5eb
790
570
© P
ER
I Gm
bH
EN_Rueckseite_2011.indd 18 10.09.13 20:36