quick reference guide pvg - aquafin inc. repair aquafin®-1k polymer modified cementitious...
TRANSCRIPT
Fountains and water features
Moisture vapor emission controlConcrete repair and restoration
• Cementitious waterproofing
• Crystalline waterproofing
• Liquid waterproofing admixtures
• Concrete repair products
• Chemical injection grouts
• Topically applied moisture vapor reduction systems
• Self leveling underlayments
Visit our website www.aquafin.net for more information.
AQUAFIN, Inc. • 505 Blue Ball Rd., #160 • Elkton, MD 21921 Toll Free 1-866-AQUAFIN • Phone (410) 392-2300 • Fax (410) 392-2324 [email protected] • www.aquafin.net
Waterproofing & Concrete Restoration • High Performance Coatings Moisture Vapor Remediation & Flooring • Injection Grouting
Servin
g the
co
nstruction industry since 1989
years20+
Quick Reference Product Guide
Injection grouting
Foundations and pitsTraffic bearing coatings
Balconies, patios and walkwaysWater and wastewater facilities
Think Globally. Act Locally.
CONCRETE REPAIR
AQUAFIN®-1KPolymer modified cementitious waterproof coating• Cementitious breathable membrane• For concrete, brick & masonry• Resists strong hydrostatic pressure• Applied to positive or negative side• NSF/ANSI 61 certified for potable water
AQUAFIN®-2K/MHighly flexible cementitious protective coating • Acrylic modified, waterproof, breathable
membrane • Withstands pedestrian traffic • Available in several colors • Elongation up to 85% • Adheres to many substrates
WATERPROOF COATINGS
VAPORTIGHT COAT-SG2 & SG3Post applied “vapor barriers”• Reduce water-vapor emissions of up to
25 lbs to 3 lbs or less• Flooring system can be installed as quickly as
2-3 hours later (with Accelerator)• Suitable for “green” concrete• Applied to damp concrete• Alkalinity barrier (pH 13-14)• SG2 treats oil contaminated slabs
VAPOR EMISSION CONTROL
AQUAFIN®-PM3811Acrylate injection gel • Adjustable curing times• Excellent penetration into various
substrates & soil• Waterproof, stabilize soil & fill voids• Can be injected against water pressure
AQUAFIN®-RAPIDFLEX-213Non-foaming, polyurethane injection grout • Higher tensile & adhesion strengths vs
foaming PU-grouts• Can be injected against water pressure• Bonds tenaciously to wet and dry surfaces,
compatible with water• Extremely quick reaction time
AQUAFIN® InjectPro-LVHydrophobic, flexible polyurethane grout• Low viscosity• For sealing cracks where some movement is
possible• Zero VOC‘s - meets LEED criteria• Can expand more than 20 x initial volume
AQUAFIN® InjectPro-CutHydrophobic polyurethane grout• For sealing static joint and cracks in concrete• Zero VOC‘s - meets LEED criteria• Can expand more than 25 x initial volume
INJECTION GROUTING
Visit our website for complete product information and a complete listing of all products: www.aquafin.net or contact us toll free at 1-866-AQUAFIN (278-2346)
AQUAFIN®-ICCrystalline waterproofing slurry• Penetrates into concrete• Permanently active (breathable)• Applied to damp substrate• Resists strong hydrostatic pressure• Applied to positive or negative side• Self sealing effect to 1/64” crack width• NSF/ANSI 61 certified for potable water
AQUAFIN®-IC-ADMIXLiquid crystalline waterproofing admixture• Ready to use• Easy mixing, minimal influence on mix design• Resists extreme hydrostatic pressures• Waterproofs concrete even at high w/c
ratios• Self sealing effect to 1/64” crack width• NSF/ANSI 61 certified for potable water
CRYSTALLINE WATERPROOFING
SELF LEVELING UNDERLAYMENTS
031313 ED/PG
/AM
LEVEL-Ultra Moisture tolerant, calcium aluminate, cementitious self leveling underlayment• Use both interior and exterior• Installs from 1⁄8” - 1¼”• Great for fast track construction• Compatible with radiant floor heating and a
variety of floor coverings
LEVEL-Plus Moisture tolerant, calcium aluminate, cementitious self leveling underlayment• Use both interior and exterior• Installs from ¼” - 2½”• Great for fast track construction• Compatible with radiant floor heating and a
variety of floor coverings
LEVEL-Patch-FF Rapid setting, horizontal grade floor finish• Skim coat and patch• Feather edge to 3⁄8”• One component - just add water• Fast setting
REBAR PRIMER/BOND-CI Cementitious corrosion-inhibiting coating for reinforcing steel• Extended pot life and contact time• Resistant to penetration of water and chlorides• Very easy to use on vertical & overhead areas• Active corrosion inhibitor
MORTAR-40Polymer modified structural repair mortar• Up to 1½” vertical, 4” horizontal• Can be troweled or sprayed• High strength, interior & exterior• Shrinkage compensated• NSF/ANSI 61 certified for potable water
MORTAR-V/O Vertical & overhead concrete repair mortar• Non-sag - excellent “hang” characteristics• For concrete, masonry & block• Low shrinkage• Excellent workability - can be sculpted and
shaved with ease
MORTAR-LNSlow setting waterproof lining, repair & sealing mortar
• Horizontal, overhead, vertical• Heavy duty - traffic bearing• Patching, reprofiling & strucural repair mortar• Single layer up to 1” thickness• Can be troweled or sprayed• NSF/ANSI 61 certified for potable water
MORTAR-ScreedOne part, polymer modified, full depth concrete repair mortar• Fiber reinforced, strong final strengths• Polymer modified, strong adhesion to concrete• Installs from 3/8“ to 5“
Plug-ICFast set crystalline cementitious waterstop• Stops active water leaks• NSF/ANSI 61 certified for potable water• Waterproof seal strips at joints (coves & reglets)
FIX 10-SUltra fast set cementitious waterstop• Stops active water leaks• 10 to 30 second set time
Download our App today!