quick start guide s08pt60-evk - nxp semiconductors · pta6-5 pta1-3 pta0-1 16-ptg1 14-ptc3 12-ptc2...
TRANSCRIPT
Quick Start Guide
GET TO KNOW THE S08PT60-EVK
Figure 1: S08PT60-EVK Callouts Figure 2: S08PT60-EVK Pin-Outs
J13 JM60 BDM Header
J3 Header
J4 Header
Thermistor
D1 RGB LED
SW3
IrDA Transceiver
SW1 Reset
J2 Header
J6 PT60 BDM Header
J5
S08PT60
J1 Header
Touch Electrode1
Touch Electrode2
SW2
Potentiometer
Accelerometer/Magnetometer
D5 Power/OSBDM Micro USB
20-PTA318-PTA216-AREF14-GND12-PTE010-PTB48-PTE16-PTB54-PTC02-PTG2
GND-19PTB2-17PTB0-15PTC7-13PTC6-11PTC1-9PTA7-7PTA6-5PTA1-3PTA0-1
16-PTG114-PTC312-PTC210-PTG08-PTB06-PTA14-PTC72-PTC6
1-PTC53-PTC45-PTB57-PTB49-PTD111-PTD013-PTH115-PTH0
1-PTB33-PTC05-PTD27-PTD39-PTF011-PTF1
NC-15NC-13NC-11NC-9NC-7NC-5
PTC2--3NC-1
NC-2P3V3-4PTA5-6P3V3-8P5V-10
GND-12GND-14
P5V_MC_IN-16
PTF4-2PTF5-4PTF6-6PTF7-8
PTA6-10PTA7-12
www.nxp.com
STEP-BY-STEP INSTRUCTIONS
1. Connect the S08PT60-EVK to a PC using the included micro USB cable to power/OSBDM micro USB connectors (J7) of S08PT60-EVK board. A green LED (D5) will illuminate, indicating power is on.
2. The S08PT60-EVK comes pre-programmed with a demo which leverages the on-board accelerometer. When the board is lying flat, the RGB LED (D1) is turned off. When the board is tilted, the red or blue LEDs will gradually illuminate based on the degree of tilt.
3. J6 is the BDM header which can be used to debug/program S08PT60 by the debugger P&E Multilink FX or P&E Multilink.
4. J5 must be open when using P&E Multilink FX to supply power and debug/program S08PT60.
5. Explore more out-of-box demos and download software and tools at www.nxp.com/S08PT60-EVK.
SUPPORT
Visit www.nxp.com/support for a list of phone numbers within your region.
WARRANTY
Visit www.nxp.com/warranty for complete warranty information.
Get StartedDownload installation
software and documentation at www.nxp.com/S08PT60-EVK.
www.nxp.com
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. © 2019 NXP B.V.
Document Number: S08PT60EVKQSG REV 0 Agile Number: 926-46105 Rev A