quick start up
TRANSCRIPT
-
8/12/2019 Quick Start Up
1/24
-
8/12/2019 Quick Start Up
2/24
2 / 24 Quick Start Up DynaWorks 7- Edition 1.0
-
8/12/2019 Quick Start Up
3/24
Quick Start Up DynaWorks 7- Edition 1.0 3 / 24
Table of contents
System requirements ...........................................................................................4
DynaWorks 7 installation on Windows 7 ............................................................4License installation ..............................................................................................6Start DynaWorks 7 ................................................................................................7About DynaWorks 7 .............................................................................................. 8DynaWorks 7 principle .........................................................................................9
Core Workbenches ........................................................................................... 10Expertise Workbenches ................................................................................... 13
Open a database ................................................................................................ 14Browse through browsing Panel ....................................................................... 15
Browse through browsing Path ........................................................................ 16Close a database ................................................................................................ 17Display data ......................................................................................................... 18Process data by commands .............................................................................. 19Copyright ............................................................................................................. 20
-
8/12/2019 Quick Start Up
4/24
4 / 24 Quick Start Up DynaWorks 7- Edition 1.0
System requirements
Supported operated systems
Windows 7 - 64 bits Red hat Linux Enterprise 6.1 - 64 bits
Minimum material configuration for a standard use of DynaWorks 7:
Windows 7 (64 bits) Red Hat Linux enterprise 6.1(64 bits)
Intel or AMD 64 bits processor Graphic card: 256 Mo for standard
workbenches - minimum resolution1280x1024 pixels
Processor: Bi-processor or "dual core" Memory: 4 Go Disk capacity for installation: 1 Go Disk capacity to store databases: 500
Go
Intel or AMD 64 bits processor Graphic card: 256 Mo for standard
workbenches - minimum resolution1280x1024 pixels
Processor: Bi-processor or "dual core" Memory: 4 Go Disk capacity for installation: 1 Go Disk capacity to store databases: 500
Go
-
8/12/2019 Quick Start Up
5/24
Quick Start Up DynaWorks 7- Edition 1.0 5 / 24
DynaWorks 7 installation on Windows 7
Installer launching
Log on the computer as anadministrator, and run theDWSetup.exe program to launchthe installation wizard.TheDynaWorks Installationwindow is displayed.
Choose the installation procedurelanguage and click OK.
Standard installation
Manage instancesSelectInstall a New Instanceand click OK(This choice does not appear if DynaWorks7 is installed for the first time in your machine).
IntroductionRead carefully the general recommendations and click Nextto continue the installation.
License managementRead it carefully and then Acceptthe terms of the LicenseAgreement. Click Nexttocontinue the installation.
Choose Install SetSelect theStandardoption andclick Nextto continue theinstallation.
Choose Install FolderLeave the default specifiedinstallation directory C:\ProgramFiles\DynaWorks7.0and clickNextto continue the installation.
Databases administratorLeave the default specified value (*) to allow everybody to administrate all the databases on thelocal computer. Click Nextto continue the installation.
Databases server authenticationCheck Noneto disable authentication (default option) and click Nextto continue the installation.
Common resources databaseLeave the default options to install the resources database locally in the default folder:
-
8/12/2019 Quick Start Up
6/24
6 / 24 Quick Start Up DynaWorks 7- Edition 1.0
. Host: local,
. Folder: C:\Program Files\DynaWorks7.0\base,
. Name: CommResourcesclick Nextto continue the installation.
Choose Shortcut FolderCheck In a new Program Group:DynaWorks 7.0(default option) and click Nextto continuethe installation.
Pre-Installation SummaryVerify the installation summaryinformation and click Installtoproceed or Previousto modify theinstallation parameters.
Installing ...The installation progress bar isdisplayed.
Configuring FLEXlm licenseserverCheck Yesto setup your localnode-locked licenseOrCheckNoto use a remote floatinglicense server.
Click Nextto continue the installation.
For more information about FLEXlm configuration, see chapter Licenses installation. Installation completed
See the installation result and click Doneto close the installation wizard.DynaWorks 7 is now installed.
On some computers, a message is displayed prompting to restart the computer.It is recommended to reboot your computer after the installation is done.
-
8/12/2019 Quick Start Up
7/24
Quick Start Up DynaWorks 7- Edition 1.0 7 / 24
License installation
DynaWorks 7 license manager is based on FLEXlmTM11.12.
Installing a node-locked license (local)
Copy the license.datfile delivered by the DynaWorks support team ([email protected]), tothe local C:\flexlmdirectory (create the directory if necessary).
From the FLEXlmLMTOOLS, select theConfig Servicestab.
Check the UseServices and Startserver at Power Upoptions.
Click Save Service. Answer Yesto the
question that follows.
Select theStart/Stop/Reread tab.
Click Start Server. Close the FLEXlm
LMTOOLS program.
Installing a floating license (remote)
For all installation on a client machine with a floating license on remote server,
Copythe license.datfile delivered by the DynaWorks support team ([email protected]) to thelocal C:\flexlmdirectory (create the directory if necessary). The license.dat file specify the name of thlicense server to use.
OR
Set the MS Windows environment variableLMITS_LICENSE_FILE to port_number@server_name.Administrator rights are required.
-
8/12/2019 Quick Start Up
8/24
8 / 24 Quick Start Up DynaWorks 7- Edition 1.0
Start DynaWorks 7
In the MS Windows Startmenu,Select All programs.Open the DynaWorks 7.0 group.Select DynaWorks v7 Standard.
DynaWorks 7starts.The different available plug-ins areloaded.
DynaWorks 7 opens the main windowonthe Welcomeworkbench by default.
-
8/12/2019 Quick Start Up
9/24
Quick Start Up DynaWorks 7- Edition 1.0 9 / 24
About DynaWorks 7
Relevant information about DynaWorks 7
From theHelpmenu ofmain window, selectAbout DynaWorks.It displays:
The DynaWorksversion
The current profile
The Commonresources databasecurrently used
The right part of this window provides the customer supportandcommercialcontactinformation.An access to the INTESPACE website is proposed using the Go to web site link.
-
8/12/2019 Quick Start Up
10/24
10 / 24 Quick Start Up DynaWorks 7- Edition 1.0
DynaWorks 7 principle
DynaWorks 7 consists of a single window organized by Workbenches.Each workbench isidentified by its icon on the left end of the main window.
Keyboard shortcut Ctrl+number can be used to access a specific workbench at any time (to findthe number associated with the workbench, display the tooltip using the mouse over the icon).
2 types of workbenches:
Core workbenches: workbenches provided by default in DynaWorks 7 (Welcome,View, Help)
Expertise workbenches: additional workbenches (Analysis, Dydgets, ...) focused on
specific business needs are installed as plug-ins.
Note: You can switch from one workbench to another one at any time by clicking onits icons without losing the contents of current workbench.
Core Workbenches
DynaWorks 7 provides 3 core workbenches (mandatory to use DynaWorks 7):
TheWelcomeworkbench acts as a home page, it allows the user to access hisrecent and favorite sessions or databases.
TheViewworkbench is the core of DynaWorks 7. It shows the content of the openeddatabases or imported files in the portfolio.
TheHelpworkbench provides access to the DynaWorks 7 on-line help.
These core workbenches can be completed by expertise workbenches.
-
8/12/2019 Quick Start Up
11/24
Quick Start Up DynaWorks 7- Edition 1.0 11 / 24
Welcome Workbench
Access to the Welcome Workbench
To activate Welcome workbench, click on theWelcomeiconon the left panel or use the shortcut Ctrl+1at anytime.
When starting DynaWorks 7, theWelcomeworkbench is activated bydefault.
TheWelcomeworkbench provides
access to two tabs: Getting Started Fast Databases access
The Getting Started tabprovides:
a list of tutorials video teaching some important feature of DynaWorks 7. a direct link to open an existing user session. a section "Did You Know?" providing tips and tricks.
The Fast Databases access tabprovides:
a quick access open a recently used or favorite database. a shortcut to Open/Organize commandto manage the DynaWorks 7 databases (this
command is the same as the one in the Database menu of the View workbench).
-
8/12/2019 Quick Start Up
12/24
12 / 24 Quick Start Up DynaWorks 7- Edition 1.0
View Workbench
Access to the View Workbench
To activate View workbench, click on theViewicononthe left panel or use the shortcut Ctrl+2at any time.
This workbench allows to: simultaneously open multiple
databasesregardless of the datamodel
manage the content of the currentdatabase (consult, create, modify,
delete according to the accessrights)
Display dataas curves ornumerical values
import/export data in/out of thecurrent database or portfolio
management of user sessions print results
-
8/12/2019 Quick Start Up
13/24
Quick Start Up DynaWorks 7- Edition 1.0 13 / 24
Help Workbench
Access to the Help Workbench
To activate Help workbench, click on theHelpicononthe left panel or use the shortcut Ctrl+numberat any time.
(to find the number associated to Helpworkbench, display the tooltip using themouse over the button icon)
Note: Whatever the configuration of your DynaWorks 7, the button icon Helpworkbench will always be located in last position. This is why the shortcut number isnot fixed.
-
8/12/2019 Quick Start Up
14/24
14 / 24 Quick Start Up DynaWorks 7- Edition 1.0
Expertise Workbenches
The most useful expertise workbench is the Analysisone.
The Analysis workbench provide a dedicated environment to analyze the data storedin the database or portfolio using commands or scripts.
Analysis Workbench
Access to the Analysis workbench
To activate Analysis workbench, click on theAnalysisiconon the left panel or use the shortcut Ctrl+numberatany time.
(to find the number associated toAnalysisworkbench, display the tooltipusing the mouse over the button icon)
This workbench allows to: run processing commandsfrom the
400 analysis functions organized byfield of expertise.
manage processing scripts(consult, create, modify, delete,load, unload, according to theaccess rights).
share the display user, with theView workbench, calculation resultsas 2D curve or table of numericvalues.
Note: Whatever the configuration of your DynaWorks 7, the button icon Helpworkbench will always be located in last position. This is why the shortcut number isnot fixed.
-
8/12/2019 Quick Start Up
15/24
Quick Start Up DynaWorks 7- Edition 1.0 15 / 24
Open a database
Open a database
By default, a demo database named Initiationis installed in the directory C:\ProgramFiles\DynaWorks7.0\base.
Select theViewworkbench inthe workbench panel.
From the Databasemenu ofmain window, selectOpen/Organize...
In the left part of the Open /Organize databaseswindow,double-click on This computeritem and select the databasefolder C:\ProgramFiles\DynaWorks7.0\base.
The list of databases appears inthe right part.
Select the Initiationdatabaseand click on Open.
The Initiationdatabase isopened in Database View.Read/ write mode is set by default.
A tab on Programclass isautomatically displayed namedProgram (Initiation).
The Program (Initiation)tab is divided in 3 areas:
- on the left, a browsing panel(in purple on image above) displaying the database tree classes
- on the right, the content of the class selected in browsing panel named Database view(in blueon image above)
- in the middle of Database view toolbar, abrowsing path(in red on image above).
-
8/12/2019 Quick Start Up
16/24
16 / 24 Quick Start Up DynaWorks 7- Edition 1.0
Browse through browsing Panel
Browsing Panel
Browsing the current database is done by:
using the favorite database views delivered as standard or created by the DynaWorks 7administrator.
expanding the database tree, selecting the desired class to display its content in the DatabaseView.
Use favorite database views
Expand the favorite databases views tree
Click on the white triangle to the left of favorites views.
View dataClick on the name of one favorite view to display itscontent in the Database View.
Use tree of the database
Expand the database tree
Click on the white triangle to the left of thedatabasename Initiation or class name.
View dataClick on the name of one class to display its content in the
Database View.
-
8/12/2019 Quick Start Up
17/24
Quick Start Up DynaWorks 7- Edition 1.0 17 / 24
Browse through browsing Path
Browsing Path
The browsing feature is an easy way to retrieve linked data based on the selected records in the
Database view.Browsing the current database is done by successive filtering: select a record to go to its linkeddata.
From a database view, select a record.
Click on the drop down menu in the browsing path(trianglepointing down to the right of SubProgram class on imagebelow against)
Select the target linked class to display.
Data of selected classappears in the same Database View.
-
8/12/2019 Quick Start Up
18/24
18 / 24 Quick Start Up DynaWorks 7- Edition 1.0
Close a database
DynaWorks provides two ways to close a database open from the Viewworkbench:
Close all open tabs on the samedatabase (same color) by clicking onthe cross to the right of the tabname.
From the Databasemenu of mainwindow,
- Select Close database.
- Selectthe databaseto close.All open tabs on this database will beclosed.
-
8/12/2019 Quick Start Up
19/24
Quick Start Up DynaWorks 7- Edition 1.0 19 / 24
Display data
Select theViewworkbench in theworkbench panel.
Open the Initiationdatabaseforexample.
Browse through the browsing paneltoselect the Responseclass.
Double-clickon one record of theDatabase View.The data is displayed in the 2Dviewer underneath the DatabaseView.
Click on the blue expansion bar on the right of the graphic viewer.A panel is opened to access to the numeric values displayed.
Drag&Dropanother record from the Database View in the same 2D frame.The display of this data is superimposed the selected record with the first one.
Selectanother record from the Database View. By right click, select Open data with Numericviewer.The display of this data is appeared in a new frame named Numeric viewer
-
8/12/2019 Quick Start Up
20/24
20 / 24 Quick Start Up DynaWorks 7- Edition 1.0
Process data by commands
Select theAnalysisworkbench in theworkbench panel.
Click on the vertical bar on the right ofAnalysis window.A panel is opened with 3 tabsVariables, Functions, Scripts.
Click on the Functions tab.The list of analysis functionsdisplays organized by field of
expertise.
Drag&Drop a function from the list inthe input area commands.The name of the function is copied.
Example proposed:
In the input area commands, write:MIN(58, 76, 95, 158)and press Enter.The command is moved in the Display area commandsfollowed by the result ingreen.
t = 0:10:0.01and press Enter.The command is written in the Display area commandscompleted with aninformation message.
FFT(SIN(2*PI*20*t))and press Enter.The command is written in the Display area commandscompleted with informationmessages.
Drag&Drop, from the Portfolioto graphic viewer, the SpectreComplexeelement created by thefunction FFT.the curve is displayed.
-
8/12/2019 Quick Start Up
21/24
Quick Start Up DynaWorks 7- Edition 1.0 21 / 24
Copyright
Important notice
This document is provided for information only. Intespace will not be held liable for any damages incurred
as a result of its use. This document may be revised or updated without notice.All translation, adaptation and copying rights reserved in all countries.The Statute of 11 March 1957, as provided in paragraphs 2 and 3 of article 41 therein, authorizes only
copies or reproductions that are strictly reserved for the personal use of the copier and not for collective
purposes and, secondly, analyses and short quotations to be used as examples or illustrations. This stated,
any representation or copy, in whole or in part, made without the prior consent of the author or its assigns
is a punishiable violation of the law (paragraph 1 of article 40).Any such representation or copy, by whatever means, therefore constitutes a breach of copyright punishable
under the provisions of articles 425 and subsequent of the French Code of Penal Law.
DynaWorks is a registered trademark of Intespace.
UNIX is a registered trademark of The Open Group.
PostScript is a registered trademark of Adobe Systems, Incorporated.
Sun Microsystem, Sun SparcStation, NFS are trademarks of Oracle Corporation, Incorporated.
Ethernet is a registered trademark of Xerox Corporation.
Matlab is a registered trademark of Mathworks, Incorporated.
FLEXlm is a registered trademark of Flexera Software, Incorporated.
Qt is a registered trademark of Digia Plc and/or their subsidiaries company.
Copyright 2014 by INTESPACE. All Rights Reserved.
-
8/12/2019 Quick Start Up
22/24
22 / 24 Quick Start Up DynaWorks 7- Edition 1.0
Notes
-
8/12/2019 Quick Start Up
23/24
Quick Start Up DynaWorks 7- Edition 1.0 23 / 24
Notes
-
8/12/2019 Quick Start Up
24/24
Worldwide presence
Toulouse :
2, rond-point Pierre Guillaumat - CS 6435631029 TOULOUSE CEDEX 4 - FRANCETl. : +33 (0) 5 61 28 11 11Fax.: +33 (0) 5 61 28 11 12
lancourt :
1, boulevard Jean MoulinZ.A.C. de la Cl St PierreMtapole 78990 ELANCOURT - FRANCETl. : +33 (0) 5 61 28 11 11Fax.: +33 (0) 5 61 28 11 12
www.intespace.fr - [email protected]