r mh-12d mh mh... · 2017-03-04 · the mh-12d is a medium format sound reinforcement system...
TRANSCRIPT
R
SINCE 1991
MH-12DApplications
Features
Type
Woofer Size
Woofer Voice Coil
HF Size
HF Voice Coil
Cabinet design
Handles
Suspension
Weight
Dimensions (WxDxH)
Sensitivity (1w/1m) (dB)
-3dB Response
-10dB Response
Power Handling (Watt)
Maximum Continuous SPL (dB)
Dispersion (HxV)
Maximum Peak SPL (dB)
Impedance
Passive Two-Way
12”
3”
1” Throat
1.49”
Rotomolded UV Protected HDPE Resin
None
With MH Rack
27 kg / 59.5 lbs
437x464x407.8 mm / 17.2x18.3x16.1 in
102dB
85Hz-12kHz
65Hz-15kHz
400w Continuous
128dB
90x40
134dB
8 Ohm
MHSERIES
Weatherproof Speaker
19/4,6,7 Moo 2 Putthamonthon Sai 5 Rd. Bangkratuek Sampran Nakornpathom 73210 Thailand Phone.+662 441-6600 email. [email protected] www .paudiothailand.com
P.AUDIO SYSTEM CO.,LTD.
General Specifications
Acoustic Specifications
Electrical Specifications
Point source array for temporary event applicationsHigh level vocal sound reinforcement
Rotomolded UV protected one piece cabinetEasy rigging using MH RackCoaxially Mounted High Frequency Driver
The MH-12D is a medium format sound reinforcement system designed for ease of use for medium scale outdoor events. The cabinet is made from a one piece rotomolded UV resistant polyethylene enclosure, which is horn loaded and ported to aid overall SPL and low frequency extension. The grille is made from CNC punched steel, and coated in a two layer, zinc-rich UV resistant powder coat finish. There are 5 integrated rigging points within the enclosure which can be used in conjunction with the MH Rack or MH U Bracket. The MH Rack allows easy suspension and aiming of the point source array configuration. Up to 4 MH enclosures may be suspended in a single hang.
The 12 inch woofer is designed for high intelligibility and smooth frequency res-ponse. The medium energy ferrite magnetics allow good low frequency response from the system to allow it to be used with the MH SUB directly, with no require-ment for extra mid bass cabinets. The high frequency driver is the BM-D38S. This uses a mylar diaphragm and high energy ferrite magnetics to provide high displacement and therefore high output.
The MH-12D is highly suited to small to medium scale events, wher e an easy to use flown system is required.
MH-12D + MH Rack
**MH Rack Sold separately
437.1mm (17.2”)
407.8mm (16.1”) 464mm (18.3”)
407
.8m
m (1
6.1”
)
466
.9m
m (1
8.4”
)
The MH-12D is available in two Variants : either with the U bracket or MH Rack. This must be specified at the time of ordering.