r-s202 owner’s manual - yamaha corporation · pdf fileoperating and maintenance...

UA

ENOWNER’S MANUAL

Receiver

• Explanation of Graphical SymbolsThe lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1 Read these instructions.2 Keep these instructions.3 Heed all warnings.4 Follow all instructions.5 Do not use this apparatus near water.6 Clean only with dry cloth.7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANTPlease record the serial number of this unit in the space below.MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

We Want You Listening For A LifetimeYamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

i En

IMPORTANT SAFETY INSTRUCTIONS

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3 NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America A/V Division, 6600 Orangethorpe Avenue, Buena Park, CA 90620, USA.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

FOR CANADIAN CUSTOMERSTo prevent electric shock, match wide blade of plug to wide slot and fully insert.CAN ICES-3 (B)/NMB-3(B)

NOTICEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.This equipment compiles with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person’s body.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

FCC CAUTIONChange or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Do not use this unit within 22 cm (9 inches) of persons with a heart pacemaker implant or defibrillator implant.

Radio waves may affect electro-medical devices.Do not use this unit near medical devices or inside medical facilities.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

ii En

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances around this unit.Top: 30 cm (11-3/4 in)Rear: 20 cm (7-7/8 in)Sides: 20 cm (7-7/8 in)

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:– Other components, as they may cause damage and/or

discoloration on the surface of this unit.– Burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.– Containers with liquid in them, as they may fall and

liquid may cause electrical shock to the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to an AC wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.10 When disconnecting the power cable from the AC wall

outlet, grasp the plug; do not pull the cable.11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.12 Only voltage specified on this unit must be used. Using

this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from an AC wall outlet or this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the AC wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that this unit is faulty.

17 Before moving this unit, press A (power) to set this unit to standby mode, and then disconnect the AC power plug from the AC wall outlet.

18 Condensation will form when the surrounding temperature changes suddenly. Disconnect the power cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may become warm. Turn the power off, then leave this unit alone for cooling.

20 Install this unit near the AC wall outlet and where the AC power plug can be reached easily.

21 The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

22 Excessive sound pressure from earphones and headphones can cause hearing loss.

This label is required to be attached to a product of which the temperature of the top cover may be hot during operation.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source as long as it is connected to the AC wall outlet, even if this unit itself is turned off by A. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

WARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

iii En

1 En

USEFUL FEATURES............................................... 1

SUPPLIED ACCESSORIES.................................... 1

CONTROLS AND FUNCTIONS ............................ 2Front panel.................................................................... 2Front panel display ....................................................... 4Rear panel ..................................................................... 5Remote control ............................................................. 6Using the remote control .............................................. 8

CONNECTIONS ....................................................... 9Connecting speakers and source components .............. 9Connecting the FM/AM antennas .............................. 11Connecting power cable ............................................. 11

PLAYBACK ............................................................ 12Playing a source.......................................................... 12Using the sleep timer .................................................. 12

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE...................................................13

Playing back from your Bluetooth device .................. 13Connecting an already-paired device via Bluetooth ... 14Disconnecting a Bluetooth connection ....................... 14

FM/AM TUNING ....................................................15Using preset functions ................................................ 15

SETTING THE OPTION MENU FOR EACH INPUT SOURCE .....................................................19

Option menu items ..................................................... 19

TROUBLESHOOTING ..........................................20

SPECIFICATIONS .................................................23

■ About this manual• y indicates a tip for your operation.• The instructions in this manual describe the operation of this unit with the supplied remote control. You can also use the buttons or

knobs on the front panel if they have the same or similar names as those on the remote control.

This unit allows you to:◆ Enjoy clear audio sound wirelessly using Bluetooth

technology (see page 13).◆ Listen to FM and AM radio stations (see page 15).

◆ Use the remote control of this unit to operate a Yamaha CD player (see page 7).

◆ Save power by using the AUTO POWER STANDBY function (see page 19).

Please check that you received all of the following parts.

CONTENTS

USEFUL FEATURES

SUPPLIED ACCESSORIES

Remote control

AM antenna Batteries (x2) (AA, R6, UM-3)

FM antenna

* One of the above is supplied depending on the region of purchase.

1 A (power)Turns this unit on, or sets it to standby mode.

2 FM MODEChanges the FM radio wave reception mode (stereo or monaural) when TUNER is selected as the input source (see page 15).

3 Remote control sensorReceives infrared signals from the remote control.

4 STANDBY/ON indicator

5 MEMORYStores the current radio station as a preset when TUNER is selected as the input source (see page 16).

6 BANDSets the radio tuner band when TUNER is selected as the input source (see page 15).

7 PRESET j / i Selects a preset radio station when TUNER is selected as the input source (see page 17).

8 TUNING jj / ii Selects the tuning frequency when TUNER is selected as the input source (see page 15).

9 Bluetooth indicatorIndicates the status of the connection with the Bluetooth device (see page 13).

0 Front panel displayShows information about the operational status of this unit (see page 4).

CONTROLS AND FUNCTIONS

Front panel

BAND

1 2 54 9 03 6

A B FC D E

7 8

Indicator Status

Brightly lit The power of this unit is “on”.

Dimly lit This unit is in “standby” mode.

Off The power of this unit is “off”.To turn off this unit, disconnect the power cable from an AC wall outlet.

2 En


A PHONES jackFor connecting headphones.

yPress SPEAKERS A/B so that the SP A/B indicators (see page 4) turn off before you connect your headphones to the PHONES jack.

B SPEAKERS A/BTurns on or off the speaker set connected to the SPEAKERS A and/or SPEAKERS B terminals on the rear panel each time the corresponding button is pressed (see page 12).

C BASS –/+Increases or decreases the low frequency response. Control range: –10 dB to +10 dB

D TREBLE –/+Increases or decreases the high frequency response.Control range: –10 dB to +10 dB

E INPUT l / hSelects the input source you want to listen to.

F VOLUME controlIncreases or decreases the sound output level.

3 En


1 PRESET indicatorLights up or blinks when using the preset function (see page 16).

2 MEMORY indicatorLights up or blinks when registering radio stations as presets (see page 16).

3 SP (SPEAKERS) A/B indicatorsLight up according to the set of speakers selected.Both indicators light up when both sets of speakers are selected.

4 TUNED indicatorLights up when this unit is tuned in to an FM or AM station with a strong signal.

5 SLEEP indicatorLights up when the sleep timer is turned on (see page 12).

6 ST indicatorLights up when this unit is in stereo mode and tuning in an FM station with a stereo broadcast.

7 kHz/MHz indicatorsLights up according to the current broadcast frequency.kHz: AMMHz: FM

8 Multi-information displayShows information when adjusting or changing settings.

Front panel display

4 En


1 ANTENNA terminalsUsed to connect the radio antennas (see page 11).

2 Power cableFor connecting this unit to an AC wall outlet (see page 11).

3 CD jacksUsed to connect a CD player (see page 9).

4 LINE 1-2 jacksUsed to connect audio components (see page 9).

5 LINE 3 jacksIN jacksUsed to connect to audio output jacks of an audio component (see page 9).

OUT jacksUsed to connect to audio input jacks of an audio component (see page 9).

6 SPEAKERS terminalsUsed to connect speakers (see page 9).

7 VOLTAGE SELECTOR (Only for General model)

Rear panel

763 4 5

21

5 En


■ Common controlsThe following parts and controls can be used no matter which input source is selected.

1 Infrared signal transmitterSends infrared signals.

2 A (power)Turns this unit on, or sets it to standby mode.

3 SLEEPSets the sleep timer (see page 12).

4 Input selector buttonsSelect the input source you want to listen to.

yThe input source names correspond to the names of the connection jacks on the rear panel.

5 TREBLE –/+Increases or decreases the high frequency response.Control range: –10 dB to +10 dB

6 BASS –/+Increases or decreases the low frequency response.Control range: –10 dB to +10 dB

7 BALANCE L/RAdjusts the sound output balance of the left and right speakers to compensate for sound imbalances.Control range:

8 / / / / ENTERSelects and confirms items in the Option menu (see page 19).

9 MENUTurns the Option menu on and off (see page 19).

0 VOLUME +/–Increases or decreases the sound output level.

A SPEAKERS A/BTurns on or off the speaker set connected to the SPEAKERS A and/or SPEAKERS B terminals on the rear panel each time the corresponding button is pressed (see page 12).

B DIMMERSelect the brightness level of the front panel display from 3 levels by pressing this button repeatedly.

y• This setting is retained even if you turn off this unit.• The default setting is the brightest.

C MUTEMutes the sound output. Press again to restore the sound output to the previous volume level.

Remote control

SLEEP

LINE 1

CD TUNER

TUNING

PRESET

TREBLE

SPEAKERS

B

A

R

BASS

MENU DIMMER

MUTE

VOLUME

DISC SKIP

BALANCE

BLUETOOTH

ENTER

MEMORY

INFO

BAND

LINE 2 LINE 3

1

2

3

9 B

C

E

A

4

5

6

0

7

8

D

(+20 dB) (center) (+20 dB)The opposite side of channel is muted.

The opposite side of channel is muted.

6 En


■ Radio function controlsThe following buttons can be used when TUNER is selected as the input source.

D TUNING jj / ii Selects the tuning frequency (see page 15).

PRESET j / i Selects a preset radio station (see page 17).

BANDSwitches the radio tuner band.

MEMORYStores the current radio station as a preset (see page 16).

INFOOnly for Europe model:Switches information shown on the front panel display.

■ Yamaha CD player controlsThe following buttons can be used to control a Yamaha CD player.

E Yamaha CD player control buttonss Stops playbacke Pauses playbackp Starts playbackDISC SKIP Skips to the next disc in a CD changerb Skips backward a Skips forward

Ejects the discw Rewinds playbackf Fast-forwards playback

Even when using a Yamaha CD player, certain components and features may not be available. Refer to your component’s owner’s manual for more information.

■ Bluetooth controlsThe following buttons can be used to control a Bluetooth device.

8 Bluetooth control buttonsBLUETOOTH Switches the audio source to

BluetoothI Skips backwardI Skips forwardII Starts/pauses playback

Yamaha does not guarantee the operation of all Bluetooth devices.

Note

Note

7 En


■ Installing batteriesChange all batteries if you notice the operation range of the remote control narrows. Before inserting new batteries, wipe the battery compartment clean.

■ Operation rangePoint the remote control at the remote control sensor on this unit and remain within the operating range shown below. The area between the remote control and this unit must be clear of large obstacles.

• Be careful not to drop the remote control.• If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.• If you find leaking batteries, discard the batteries immediately, taking care not to touch the leaked material. If the leaked material

comes into contact with your skin or gets into your eyes or mouth, rinse it away immediately and consult a doctor. Clean the battery compartment thoroughly before installing new batteries.

• Do not use old batteries together with new ones. This may shorten the life of the new batteries or cause old batteries to leak.• Do not use different types of batteries (such as alkaline and manganese batteries) together. Batteries that look the same may have a

different specification.• Dispose of batteries according to your regional regulations.• Keep the batteries in a location out of reach of children.

Batteries can be dangerous if a child were to put in his or her mouth. • If you plan not to use this unit for a long period of time, remove the batteries from this unit. Otherwise, the batteries will wear out,

possibly resulting in a leakage of battery liquid that may damage this unit.

Using the remote control

AA, R6, UM-3 batteries

Approximately6 m (20 ft)

Remote control

CAUTION

8 En

Make sure to connect L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. Refer to the owner’s manual for each of your components.Make sure to use RCA cables to connect audio components.

• Do not connect this unit or other components to the main power until all connections between components are complete.

• Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers.

CONNECTIONS

Connecting speakers and source components

CAUTION

Audio out

CD recorder, etc.

DVD player, etc.

Audio out

Left

Audio out

Audio out

Audio in

Speakers B

Tape deck, etc.CD player

Speakers A

Right

LeftRight

9 En

CONNECTIONS

■ OUT jacks• The OUT jacks output audio signals of the currently

selected input (except when LINE 3 is selected).• Volume level, tone control and balance settings do not

affect the OUT jacks.

■ Connecting speaker cables

When inserting speaker cables into the speaker terminals, insert only the bare speaker wire. If insulated cable is inserted, the connection may be poor and sound may not be heard.

Connect the speakers with an impedance as shown below. If you connect speakers with an excessively low impedance, this unit may overheat.

■ Bi-wire connectionBi-wire connection separates the woofer from the combined midrange and tweeter section.A bi-wire compatible speaker has four binding post terminals. These two sets of terminals allow the speaker to be split into two independent sections. With these connections, the mid and high frequency drivers are connected to one set of terminals and the low frequency driver to another set of terminals.

Connect the other speaker to the other set of terminals in the same way.

When making bi-wire connections, remove the shorting bridges or cables on the speaker.

yTo use the bi-wire connections, press SPEAKERS A and SPEAKERS B so that both SP A and B light up on the front panel display.

Note

CAUTION

Speaker connection Speaker impedance

SPEAKERS A or SPEAKERS B

8 or higher

SPEAKERS A and SPEAKERS B

16 or higher(except for North America model)

Bi-wiring 8 or higher

Remove approximately 10 mm (3/8 in) of insulation from the end of each speaker cable.

Note

Rear panelSpeaker

SLEEP

LINE 1

CD TUNER

TUNING

PRESET

TREBLE

SPEAKERS

R

BASS

BALANCE

MEMORY

INFO

BAND

LINE 2 LINE 3

B

A

B

A

SPEAKERS A/B

10 En

CONNECTIONS

Connect the supplied FM/AM antenna to this unit.Fix the end of the FM antenna to a wall, and place the AM antenna.

• If you experience poor reception quality, install an outdoor antenna.

• Unwind only the length of cable needed from the AM antenna unit.

• The wires of the AM antenna have no polarity.

■ Assembling the AM antenna

■ Connecting the wire of the AM antenna

Plug the power cable into an AC wall outlet after all other connections are complete.

Only for General model:Before connecting the power cable, make sure you set VOLTAGE SELECTOR of this unit according to your local voltage. Improper setting of VOLTAGE SELECTOR may cause fire and damage to this unit.

Connecting the FM/AM antennas

Notes

FM antenna AM antenna

Connecting power cable

CAUTION

To the AC wall outlet with the power cable

11 En

1 Press A (power) to turn on this unit.

2 Press one of the Input selector buttons to select the desired input source.

3 Press SPEAKERS A and/or SPEAKERS B to select the desired speaker(s).

y• When one set of speakers is connected using bi-wire

connections, or when using two sets of speakers simultaneously (A and B), make sure SP A and SP B are displayed on the front panel display.

• When listening with headphones, turn off the speakers.

4 Play the source.

5 Press VOLUME +/– to adjust the sound output level.

yYou can adjust the tonal quality by using BASS –/+ and TREBLE –/+, and the left/right sound balance of speakers by using BALANCE L/R (see page 6).

6 When finished listening, press A (power) to set this unit to standby mode.Press A (power) to turn this unit on again.

y• You can also use the buttons or knobs on the front panel if

they have the same or similar names as those on the remote control.

• For recording, see page 5.

Use this feature to automatically set this unit to standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source.

Press SLEEP repeatedly to set the time duration until the unit enters standby mode.Each time you press SLEEP, the time duration indicated on the front panel display changes cyclically as shown below.

The SLEEP indicator blinks while setting the amount of time for the sleep timer.

If the sleep timer is set, the SLEEP indicator on the front panel display lights up.

yTo cancel the sleep timer, do one of the following:

– Select “SLEEP OFF”.– Press A (power) to set this unit to standby mode.

PLAYBACK

Playing a source

SLEEP

LINE 1

CD TUNER

TUNING

PRESET

TREBLE

SPEAKERS

R

BASS

MENU DIMMER

MUTE

VOLUME

BALANCE

BLUETOOTH

ENTER

MEMORY

INFO

BAND

LINE 2 LINE 3

B

A

R

B

A

A (power)

Input selector buttons

SPEAKERS A/B

VOLUME +/–

TREBLE –/+

BASS –/+

BALANCE L/R

Using the sleep timer

SLEEP

LINE 1

CD TUNER BAND

LINE 2 LINE 3

A (power)SLEEP

120 min 90 min

60 min30 minoff

12 En

This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device (mobile phone, digital audio player, etc.). Please also refer to the owner’s manual of your Bluetooth device.

You’ll need to perform the pairing operation the first time you use your Bluetooth device with this unit, or if the pairing settings have been deleted. Pairing is an operation that registers the Bluetooth device with this unit. If pairing is not successful, refer to the item “Bluetooth” in “TROUBLESHOOTING” (see page 21).

• Yamaha does not guarantee all connections between this unit and Bluetooth device.

• This unit can be paired with up to 8 Bluetooth devices. When pairing with the 9th device has succeeded, pairing data for the device with the oldest connection date will be deleted.

• While connecting to the Bluetooth device and perform the pairing with another device, the current Bluetooth connection will be canceled.

1 Press the BLUETOOTH source button for more than 3 seconds to enter pairing mode.• Pairing mode lasts for 5 minutes.• In pairing mode, the front panel display of this unit

will indicate “PAIRING,” and the Bluetooth indicator will blink.

yYou can also enter pairing mode in either of the following two ways:

– Press and hold down INPUT l or h on this unit for three seconds.

– Select “PAIRING” from the Option menu, and then press ENTER (see page 19).

2 Turn on the Bluetooth function on the Bluetooth device.For details refer to the owner’s manual of the Bluetooth device.

3 From the Bluetooth connection list of the Bluetooth device, choose this unit (R-S202 Yamaha).• When pairing has been completed, the front panel

display of this unit will indicate “COMPLETED”. • When the Bluetooth device is connected, the front

panel display of this unit will indicate “CONNECTED” and the Bluetooth indicator will light up.

yIf you are asked to enter a password, enter the numerals “0000”.

4 Play back music from the Bluetooth device.

• Take care that the volume setting of this unit is not too high. We recommend that you adjust the volume on the Bluetooth device.

• If Bluetooth is selected as the audio source, this unit will automatically turn off when 20 minutes have elapsed without any Bluetooth connection nor any operation performed.

yYou can use the Bluetooth control buttons on the remote control to control playback (see page 7).

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

Playing back from your Bluetooth device

Notes

R

MENU DIMMER

MUTE

VOLUME

BALANCE

BLUETOOTH

ENTER

BLUETOOTHBLUETOOTHNotes

13 En

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

Once pairing has been completed, connecting a Bluetooth will be easy the next time.

■ Connecting from the Bluetooth device

1 In the Bluetooth settings of the Bluetooth device, turn Bluetooth on.

2 From the Bluetooth connection list of the Bluetooth device, choose this unit (R-S202 Yamaha).The Bluetooth connection will be established, and the front panel display of this unit will indicate “CONNECTED”.

Bluetooth connections cannot be established from the Bluetooth device when this unit is in standby.

yYou can use the Bluetooth control buttons on the remote control to control playback (see page 7).

If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth connection will be disconnected.– Switch the audio source other than Bluetooth.– Press A (power) to set this unit to standby mode.– Turn off the Bluetooth setting of the Bluetooth device.

Connecting an already-paired device via Bluetooth

Note

Disconnecting a Bluetooth connection

14 En

You can tune in to a radio station by specifying its frequency or selecting from registered radio stations.

• The radio frequencies differ depending on the country or region where this unit is being used. Front panel display illustrations shown in this section are based on Europe model.

• Only for Asia and General models: Be sure to set the tuner frequency step according to the frequency spacing in your area before you tune in to a radio station (see page 19).

1 Press TUNER to select the tuner as the input source.

2 Press BAND to select the FM/AM band.

3 Press and hold TUNING jj / ii to begin tuning.Press ii to tune in to a higher frequency.Press jj to tune in to a lower frequency.When this unit tunes in to a station, the TUNED indicator lights up on the front panel display.

If the tuning search does not stop at the desired station because the station signals are weak, press TUNING jj / ii repeatedly to tune in to the desired station.

yYou can also use the buttons on the front panel if they have the same or similar names as those on the remote control.

■ Improving FM receptionIf the signal from the station is weak and the sound quality is not good, set the FM band reception mode to monaural mode to improve reception.

Front panelPress FM MODE, and then make sure the ST indicator is turned off (see page 4).

Remote controlEnter FM MODE from the Option menu to select MONO (monaural mode) (see page 19).

You can register up to 40 radio stations as presets. Once you have registered stations, you can easily tune in to them by recalling the presets. You can automatically register FM stations that have strong signals. If the FM stations you want to store have weak signals, you can register them manually (see page 16).

■ Presetting stations automatically (Only for FM stations)

• If a station is registered to a preset number that already has a station registered to it, the previously registered station is overwritten.

• Only for Europe model: Only Radio Data System broadcasting stations can be preset automatically.

yFM stations registered as presets using the automatic preset registration feature will be heard in stereo.

FM/AM TUNING

Notes

Note

SLEEP

LINE 1

CD TUNER

TUNING

PRESET

MEMORY

INFO

BAND

LINE 2 LINE 3

TUNING jj / ii TUNERBAND

Using preset functions

Notes

SLEEP

LINE 1

CD TUNER

TUNING

PRESET

TREBLE

SPEAKERS

R

BASS

MENU DIMMER

MUTE

VOLUME

BALANCE

BLUETOOTH

ENTER

MEMORY

INFO

BAND

LINE 2 LINE 3

B

A

BLUETOOTH

ENTER

PRESET j / i

TUNER

/ / ENTER

MENU

BAND

15 En

FM/AM TUNING


2 Press BAND to select the FM band.

3 Press MENU to enter the Option menu.The Option menu for TUNER is displayed (see page 19).

4 Press / to select “AUTO PRESET”, and then press ENTER.

This unit starts scanning the FM band about 3 seconds later from the lowest frequency upwards.

y• Before scanning begins, you can specify the first preset

number to be used by pressing PRESET j / i or / .• To cancel scanning, press .

When a station to preset is found, information is displayed on the front panel display as shown in the illustration above.When scanning is complete, “FINISH” is displayed, and then the display returns to the Option menu.To return the display to the original state, press MENU.

■ Presetting stations manuallyYou can manually register the desired radio stations.

1 Tune in to the desired FM/AM station.See page 15 for tuning instructions.

2 Press MEMORY.“MANUAL PRESET” is displayed briefly on the front panel display, and then the preset number to which the station will be registered is displayed.

yBy holding down MEMORY for more than 2 seconds, you can skip the following steps and automatically register the selected station to an empty preset number (i.e., the preset number following the last preset number used).

3 Press PRESET j / i to select the preset number to which the station will be registered.When you select a preset number to which no station is registered, “EMPTY” is displayed. When you select a preset number to which a station has already been registered, the frequency of the station is displayed.

4 Press MEMORY.When registration is complete, the display returns to the original state.

y• To cancel registration, switch input or band or do not perform

any operations for about 30 seconds.• You can also preset stations manually by pressing buttons on

the front panel with the same names as remote control.

Preset number Frequency

SLEEP

LINE 1

CD TUNER

TUNING

PRESET

TREBLE

MEMORY

INFO

BAND

LINE 2 LINE 3

A

PRESET j / i

MEMORY

Preset number

16 En

FM/AM TUNING

■ Recalling a preset stationYou can recall preset stations that were registered by presetting automatically or manually.



3 Press PRESET j / i to select a preset number.

y• Preset numbers to which no stations are registered are

skipped.• If this unit does not have any preset stations, “NO

PRESET” is displayed.• If the station signals that you want to recall are weak, try

tuning in to a station manually.• You can also recall a preset station by pressing

PRESET j / i on the front panel.

■ Clearing a preset stationFollow the steps below to clear a preset station.




4 Press / to select “CLEAR PRESET”, and then press ENTER.

5 Select the desired preset station number by pressing / repeatedly.The selected preset number blinks on the front panel display.

y• You can also use PRESET j / i instead.• To cancel clearing the preset station, press or leave this

unit without any operations for about 30 seconds.

SLEEP

LINE 1

CD TUNER

TUNING

PRESET

TREBLE

MEMORY

INFO

BAND

LINE 2 LINE 3

A

PRESET j / i

TUNERBAND

SLEEP

LINE 1

CD TUNER

TUNING

PRESET

TREBLE

SPEAKERS

R

BASS

MENU DIMMER

MUTE

VOLUME

BALANCE

BLUETOOTH

ENTER

MEMORY

INFO

BAND

LINE 2 LINE 3

B

A

BLUETOOTH

ENTER

PRESET j / i

TUNER

/ / ENTER

MENU

BAND

17 En

FM/AM TUNING

6 Press ENTER again to confirm.“CLEARED” is displayed on the front panel display. Then, another preset station is shown on the front panel display. When there is no more preset station, “NO PRESET” is displayed, and then the display returns to the Option menu.To return the display to the original state, press MENU.

■ Clearing all preset stationsFollow the steps below to clear all preset stations.




4 Press / to select “CLEAR ALL PRESET”, and then press ENTER.

yTo cancel the operation and return to the Option menu, press .

5 Press / to select “CLEAR OK”, and then press ENTER.

yTo cancel without clearing the presets, select “CLEAR NO”.

When all presets have been cleared, “CLEARED” is displayed, and then the display returns to the Option menu.To return the display to the original state, press MENU.

SLEEP

LINE 1

CD TUNER

TUNING

PRESET

TREBLE

SPEAKERS

R

BASS

MENU DIMMER

MUTE

VOLUME

BALANCE

BLUETOOTH

ENTER

MEMORY

INFO

BAND

LINE 2 LINE 3

B

A

BLUETOOTH

ENTER

TUNER

/ / ENTER

MENU

BAND

18 En

19 En

The Option menu allows you to configure various settings for each input source and recall those settings automatically when an input source is selected.

1 Press one of the Input selector buttons to select the desired input source.

2 Press MENU.

3 Press / to select the desired menu item, and then press ENTER.

4 Press / to change the settings, and then press ENTER.

yTo return to the screen where you can select menu items, press .

5 To exit the Option menu, press MENU.

Available menu items vary depending on the selected input source.

yThe default settings are marked with “*”.

SETTING THE OPTION MENU FOR EACH INPUT SOURCE

SLEEP

LINE 1

CD TUNER

TUNING

PRESET

TREBLE

SPEAKERS

R

BASS

MENU DIMMER

MUTE

VOLUME

BALANCE

BLUETOOTH

ENTER

MEMORY

INFO

BAND

LINE 2 LINE 3

B

A

BLUETOOTH

ENTER

Input selector buttons

MENU

/ / ENTER

Option menu items

Menu item Description

MAX VOLUME (MAX VOL) Sets the maximum volume level so that the volume will not be accidentally increased above a certain level.Adjustable range: 01 to 99, MAX*

INITIAL VOLUME (INIT VOL) Sets the volume at the time this unit is turned on. When this parameter is set to “OFF”, the volume level used when this unit was set to standby is applied.Adjustable range: OFF*, MUTE, 01 to 99, MAX

TUNER STEP (TUNER STP)Only for Asia and General models

Sets tuner frequency step.Choices: AM10/FM100, AM9/FM50*

FM MODE Changes the FM radio wave reception mode (see page 15).Choices: STEREO*, MONO

AUTO PRESET (A, PREST) Automatically detects FM radio stations and registers them as preset stations (see page 15).

CLEAR PRESET (C, PREST) Clears a selected preset station (see page 17).

CLEAR ALL PRESET (C,A, PREST) Clears all preset stations (see page 18).

AUTO POWER STANDBY(AUTO STBY)

Sets this unit to standby mode automatically if no operation is performed in the specified time.Choices: OFF, 2H, 4H, 8H*, 12H

BLUETOOTH Enables or disables the Bluetooth function.Choices: OFF, ON*

PAIRING Enters pairing mode (see page 13).

Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, set this unit to standby mode, disconnect the power cable, and then contact the nearest authorized Yamaha dealer or service center.

■ General

TROUBLESHOOTING

Problem Cause RemedySee

page

This unit fails to turn on.

The power cable is not connected or the plug is not completely inserted.

Connect the power cable firmly.—

The impedance setting of the connected speaker is too small.

Use speaker(s) with proper speaker impedance. 10

The protection circuitry has been activated because of a short circuit, etc.

Check that the speaker wires are not touching each other and then turn the power of this unit back on.

9

This unit has been exposed to a strong external electric shock (such as lightning or strong static electricity).

Set this unit to standby mode, disconnect the power cable, plug it back in after 30 seconds, then use it normally.

—

No sound Incorrect input or output cable connections.

Connect the cables properly. If the problem persists, the cables may be defective.

9

No appropriate input source has been selected.

Select an appropriate input source by pressing one of the Input selector buttons on the remote control.

12

The SPEAKERS A/B switches are not set properly.

Turn on the corresponding SPEAKERS A or SPEAKERS B.

12

Speaker connections are not secure. Secure the connections. 9

Output has been muted. Deactivate the mute function. 6

The MAX VOL or INITIAL VOLUME setting is set too low.

Set the setting to a higher value.19

The component corresponding to the selected input source is turned off or is not playing.

Turn the component on and make sure it is playing.—

The sound suddenly goes off.

The protection circuitry has been activated because of a short circuit, etc.

Check that the speaker wires are not touching each other and then turn the power of this unit back on.

9

This unit has become too hot. Make sure the openings on the top panel are not blocked.

—

The SLEEP function has engaged and the unit has entered standby mode.

Cancel the sleep timer.12

The AUTO POWER STANDBY has set this unit to standby mode.

Change the AUTO POWER STANDBY setting to a longer setting or OFF from the Option menu by pressing MENU.

19

Only the speaker on one side can be heard.

Incorrect cable connections. Connect the cables properly. If the problem persists, the cables may be defective.

9

Incorrect setting for the BALANCE L/R setting.

Set the BALANCE L/R setting to the appropriate position.

6

There is a lack of bass and no ambience.

The + and – wires are connected in reverse at the amplifier or the speakers.

Connect the speaker wires to the correct + and – phase.

9

A “humming” sound can be heard.

Incorrect cable connections. Connect the audio plugs firmly. If the problem persists, the cables may be defective.

9

The volume level cannot be increased, or the sound is distorted.

The component connected to the LINE 3 IN/OUT jacks of this unit is turned off.

Turn on the power of the component.

—

20 En

TROUBLESHOOTING

■ Bluetooth

The sound is degraded when listening with headphones connected to a CD player connected to this unit.

This unit has been set to standby mode. Turn on the power of this unit.

12

The remote control does not work nor function properly.

Wrong distance or angle. The remote control will function within a maximum range of 6 m (20 ft) and no more than 30 degrees off-axis from the front panel.

8

Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit.

Reposition this unit.

—

The batteries are weak. Replace all batteries. 8

This unit responds to the remote control for a Yamaha AV receiver.

The remote controls for both this unit and the AV receiver have been programmed with the same remote control code.

Change the remote control ID of the Yamaha AV receiver. For more information, please refer to the owner’s manual for the AV receiver.

—

Your CD player cannot be operated with the remote control.

The remote control does not support the CD player.

Refer to the owner’s manual supplied with the CD player.

—

“OVER HEAT” appears on the front panel display.

This unit has become too hot. Make sure the openings on the top panel are not blocked. —

“CHECK SP” appears on the front panel display.

Speaker cables got shorted out. Twist bare wires of speaker cables firmly, and then connect to this unit and speakers properly. —


page


page

Cannot make this unit paired with the Bluetooth device.

The Bluetooth device does not support A2DP.

Perform pairing operations with a device which supports A2DP.

—

A Bluetooth adaptor, etc. that you want to pair with this unit has a password other than “0000”.

Use a Bluetooth adaptor, etc. whose password is “0000”. —

This unit and the Bluetooth device are too far apart.

Move the Bluetooth device closer to this unit.—

There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio-frequency signals. —

In the option menu, BLUETOOTH is set to OFF.

In the option menu, set BLUETOOTH to ON.19

Can’t establish a Bluetooth connection.

This unit is not registered on the connection list of the Bluetooth device.

Perform pairing operations again.13

In the option menu, BLUETOOTH is set to OFF.

In the option menu, set BLUETOOTH to ON.19

21 En

TROUBLESHOOTING

■ FM reception

■ AM reception

No sound is produced or the sound is interrupted during playback.

The Bluetooth connection of this unit with the Bluetooth device is disconnected.

Perform Bluetooth connection operations again.13

This unit and the Bluetooth device are too far apart.

Move the Bluetooth device closer to this unit.—

There is a device (microwave oven, wireless LAN, etc.) outputs signals in the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio-frequency signals. —

The Bluetooth function of the Bluetooth device is off.

Turn on the Bluetooth function of the Bluetooth device.

—

The Bluetooth device is not set to send Bluetooth audio signals to this unit.

Check that the Bluetooth function of the Bluetooth device is set properly.

—

The pairing setting of the Bluetooth device is not set to this unit.

Set the pairing setting of the Bluetooth device to this unit.

—

The Bluetooth device’s volume is set to the minimum.

Increase the volume level.—


page


page

FM stereo reception is noisy.

The particular characteristics of the FM stereo broadcasts being received may cause this problem when the transmitter is too far away or the antenna input is poor.

Check the antenna connections.Try using a high-quality directional FM antenna.

11

Switch to monaural mode. 15

There is distortion, and clear reception cannot be obtained even with a good FM antenna.

There is multipath interference. Adjust the antenna position to eliminate the multipath interference.

—

The desired station cannot be tuned in automatically.

The signal is too weak. Try using a high-quality directional FM antenna. 11

Try tuning manually. 15

“NO PRESET” is displayed.

No preset stations are registered. Register stations you want to listen to as preset stations before operation.

15


page

The desired station cannot be tuned in automatically.

The signal is weak or the antenna connections are loose.

Tighten the AM antenna connections and orient it for the best reception.

—

Try tuning manually. 15

There are continuous crackling and hissing noises.

The noises may result from lightning, fluorescent lamps, motors, thermostats or other electrical equipment.

Try using an outdoor antenna and a earth ground.This will help somewhat, but it is difficult to eliminate all noise.

—

There are buzzing and whining noises.

A TV set is being used nearby. Move this unit away from the TV set.—

“NO PRESET” is displayed.

No preset stations are registered. Register stations you want to listen to as preset stations before operation.

16

22 En

AUDIO SECTION• Minimum RMS output power

(8 , 40 Hz to 20 kHz, 0.2% THD) [North America, General, China, Korea, Australia and Europe models] ................................................. 100 W + 100 W[Asia model] ......................................................... 85 W + 85 W

• Dynamic power per channel (8 6 4 2 IHF) ....................................................... 125 W/150 W/165 W/180 W

• Maximum power per channel (4 1 kHz, 0.7%, THD)[Europe model] ..................................................................... 115 W

• Maximum effective output power (8 1 kHz, 10%, THD)[General model] ....................................................................140 W[Asia model] .........................................................................125 W

• Input sensitivity/Input impedance (1 kHz, 100 W/8 )CD, etc. ................................................................. 500 mV/47 k

• Output level/Output impedanceCD, etc. (Input 1 kHz, 500 mV)

LINE3 OUT....................................................... 500 mV/2.2 kCD, etc. (Input 1 kHz, 500 mV, 8 )

PHONES ............................................................ 470 mV/470 • Frequency response

CD, etc. (20 Hz to 20 kHz) ........................................... 0 ± 0.5 dBCD, etc. (10 Hz to 100 kHz) ......................................... 0 ± 3.0 dB

• Total harmonic distortionCD, etc. to SPEAKERS(20 Hz to 20 kHz, 50 W/8 ) .................................... 0.2% or less

• Signal to noise ratio (IHF-A)CD, etc. (500 mV input shorted) ......................... 100 dB or more

• Residual noise (IHF-A) .......................................................... 70 µV• Tone control characteristics

BASSBoost/Cut (50 Hz) .......................................................... ± 10 dBTurnover frequency .......................................................... 170 Hz

TREBLEBoost/Cut (20 kHz) ........................................................ ± 10 dBTurnover frequency ......................................................... 3.0 kHz

Bluetooth SECTION• Bluetooth version ........................................................ Ver. 4.1+EDR• Supported profile ...................................................... A2DP, AVRCP• Compatible codec ............................................................SBC, AAC• Maximum communication distance ........10m (without interference)• Wireless output ..................................................... Bluetooth Class 2• Supported contents protection ............................... SCMS-T method

FM SECTION• Tuning range

[North America model] ................................... 87.5 to 107.9 MHz[General and Asia models]

................................... 87.5 to 107.9 MHz/87.50 to 108.00 MHz[China, Korea, Australia and Europe models]

................................................................... 87.50 to 108.00 MHz• 50 dB quieting sensitivity (IHF-A, 1 kHz, 100% MOD.)

Mono ................................................................... 3 µV (20.8 dBf)• Signal to noise ratio (IHF-A)

Mono/Stereo .............................................................. 71 dB/70 dB• Harmonic distortion (1 kHz)

Mono/Stereo ................................................................ 0.4%/0.4%• Antenna Input......................................................... 75 , unbalanced

AM SECTION• Tuning range

[North America model] ...................................... 530 to 1710 kHz[General and Asia models] ...... 530 to 1710 kHz/531 to 1611 kHz[China, Korea, Australia and Europe models] .... 531 to 1611 kHz

GENERAL• Power supply

[North America model] ...................................... AC 120 V, 60 Hz[General model] ...................... AC 110-120/220-240 V, 50/60 Hz[China model] ......................................................AC 220 V, 50 Hz[Korea model] .....................................................AC 220 V, 60 Hz[Australia model] ............................................... AC 240 V, 50 Hz[Europe model] ................................................... AC 230 V, 50 Hz[Asia model] .......................................... AC 220-240 V, 50/60 Hz

• Power consumption [North America, General, China, Korea, Australia and

Europe models] ............................................................... 175 W[Asia model] ....................................................................... 140 W

• Standby power consumption [North America, China, Korea, Australia, Europe and

Asia models] .................................................................... 0.3 W• Dimensions (W H D) ................................ 435 141 322 mm

(17'1/8" 5'1/2" 12'5/8")• Weight .................................................................... 6.7 kg (14.8 lbs)

* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license.

BluetoothBluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft) employing the 2.4 GHz frequency band, a band which can be used without a license.

Handling Bluetooth communications• The 2.4 GHz band used by Bluetooth compatible devices is a radio

band shared by many types of equipment. While Bluetooth compatible devices use a technology minimizing the influence of other components using the same radio band, such influence may reduce the speed or distance of communications and in some cases interrupt communications.

• The speed of signal transfer and the distance at which communication is possible differs according to the distance between the communicating devices, the presence of obstacles, radio wave conditions and the type of equipment.

• Yamaha does not guarantee all wireless connections between this unit and devices compatible with Bluetooth function.

SPECIFICATIONS

23 En

ZU46020

Published 03/2016 IP-A0

© 2016 Yamaha CorporationManual Development Department

Printed in Malaysia

Yamaha Downloadshttp://download.yamaha.com/

Yamaha Global Sitehttp://www.yamaha.com/

r-s202 owner’s manual - yamaha corporation · pdf fileoperating and maintenance...

Documents