r1033gw
TRANSCRIPT
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 1/42
SERVICE WASHING MACHINE CONTENTS
WASHING MACHINE
Caution for the safety during servicing1. SPECIFICATIONS
2. SAFETY DEVICES
3. OVERVIEW OF THE WASHING MACHINE
4. OVERVIEW OF THE CONTROL PANEL
5. MAIN FUNCTION
6. TECHNICAL POINT
7. GENERAL ERROR FUNCTION
8. TROUBLE DIAGNOSIS
9. TEST MODE
10. DESIGNATION OF MAIN COMPONENTS
11. PCB SCHEMATIC DIAGRAM
11-1. PCB CIRCUIT DIAGRAM
12. SETTING UP A WASH MACHINE
13. ASSEMBLE AND DISASSEMBLE
14 . TOOLS FOR DISASSEMBLY AND ASSEMBLY
15. EXPLODED VIEW AND PARTS LIST
Manual
R1033GWC/YLWR1233GWC/YLWR833GW/YLW
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 2/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 3/42
2
1. Specifications
WASH TYPE FRONT LOADING TYPE
DIMENSION GROSS W 665mm X D 576mm X H 890mm
NET W 598mm X D 450mm X H 844mmWATER PRESSURE 50 kPa ~ 800 kPa
WEIGHT GROSS 69 kg
NET 66 kg
WASH and SPIN CAPACITY 5.2 kg (DRY LAUNDRY)POWER CONSUMPTION
WASHING220 V 180 W
240 V 180 W
WASHING andHEATING
220 V 1900 W
240 V 2200 W
SPINMODEL R833 R1033 R1233230V 430W 500W 550W
PUMPING 34 W
WATER CONSUMPTION 49 ℓ (STANDARD COURSE)
SPIN REVOLUTIONMODEL R833 R1033 R1233
rpm 800 1000 1200
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 4/42
3
2. Safety Devices
※ We adapt 5 safety devices for users to use this wash machine safely.
1) Balancing device (ASSY-Main PCB)
→ When the laundry is out of balance, to prevent the noises and vibrations, the unbalancedetecting sensor helps the laundry laid even and continue the dehydating process.
2) Anti-over water supply device→ Because water supply value is broken, once water is supplied to the 2/3 level of the door, the
water supplied is drained automatically, Over -flow error is displayed on the panel
3) Temperature-regulating device(thermistor)→ To prevent over-heating over the temperature setted up, THERMISTOR senses the temperature of
the machine continuously and helps the wash machine to work at the temperature given by users.
4 Overheating- controlling system→ Under the circumstances of THERMISTOR inferiority or abnormal condition, if wash-heater is
overheated, automatically, assy -thermal fuse cuts off the power supply to protect the machine to
keep it safe.
5) Delicate clothing safeguard function(ASSY-Main PCB)→ To protect the clothings which is weak to high temperature, the wash machine senses the
temperature inside the washing tub. if the temperature rises over 50 ℃ wool washing course and
Delicate washing course display abnormal water temperature on the panel , after draining the
water.
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 5/42
4
3. Overview of the Washing Machine
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 6/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 7/42
6
5. Main function
1) Auto power S/W off function● After power on, the auto power S/W off function automatically switches power off for you if you do not press
selection button for 10 minutes
● After selecting the function, the auto power S/W off function automatically switches power off for you if you donot press start/pause button for 10 minutes
● After finishing the last function, the auto power S/W off function automatically switches
power off for you if you do not re-select the course button or manual button
2) Door open function● If door is open during the operating, all operating is halted, and door error message will be displayed and error
molody wil coming out.● Door open error can be cleared by colosing the door. the operating keeps going on
3) No spin function● If no spin function selected, the operating is finished after last rinse
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 8/42
7
5. Main function
4) Power-out compensation function● If power is out on selected process, the process before power out is stored to EEPROM, once power is back
the process before power out continues.● When power is back, washing process starts from the process at the point of the power out, rinse/drain process
starts from the initial process.
5) Water heater Error function① This function starts working, when the heater works abnormally.
(this function begins sensing the heater 1 minutes later, after the heater operating)② The value of the initial thermistor(A1) is compared with that of the thermistor(A2) in 2 minutes (Y=A2-A1)
- For 10 minutes, the variance of temperature(Y) is less than 2 ℃ "The display shows 'E5' "
message is displayed on the panel.③ The value of the initial thermistor(A1) is compared with that of the thermistor(A2) in 2 minutes (Y=A2-A1)
- For 2 minute the variance of temperature increases more than 7 ℃ "The display shows 'E5' "
message is displayed on the panel.
④ At this time heater, Error "course led 8ea on 30 ℃/60℃ led on" is displayed and all working process off ⑤ The heater operating continues during heating hours, if washing hour is left over, the residual washing process
keeps going without heating.
POWER-OUT COMPENSATION FUNCTION PROCESS
WASHINGSTART RINSE/DRAIN
PROCESS
RINSE/DRAIN
STARTFINISH
POWER OUT
POWER BACK
SAVE DATA
to EEPROMSAVE DATA
to EEPROM
READ DATA
(PROCESS+TIME)
MICOM RESTORE MICOM RESTORE
RESTART
PROCESS
POWER OUT
POWER BACK
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 9/42
8
5. Main function
6) Fuzzy washing function ( weight-sensing)☞ After finishing initial water supply, when the fall of the water level needs supplementary water supply,
Sensing function perceives the weght with the supplementary water supply numbers and starts to work.
Under the course of Cotton, if the supplementary water supply numbers become 3 - 4 times the
function is going at default condition ( high water level ), if 1-2 below that is going at middle level, if 0 below
low water level, heating hours and rinse hours depend on the above data.
※
After sensing weight, above hours is decreased from above default hours
7) Bubble -detecting function
At the each condition of washing&dehydrating , rinse&dehydrating , hydrating, bubble -detecting function works,
this function works 5times normally, if the function detects bubbles at 6 times , the bubble-detecting function
stops and go on to the next process.● The bubble-detecting function during washing & dehydrating to rinse & dehydrating
after 2 times instant dehydrating and before main dehydrating, if the water level is under 25.45KHZ, Bubble→ Detecting function thinks there are bubbles and add the bubbles-removing rinse, needing hours are above
hours and 6 min 40 sec.
→ The bubble-detecting function during single hydrating processafter 2 times instant dehydrating and before main dehydrating , if the water level is 25.45KHZ below or
during main dehydrating, water level data is 23.80KHZ below Bubble-detecting function thinks there are
bubbles and add the bubbles-removing rinse 1 times, needing hours are above hours and 5 min 50 sec.
Washing hoursRinse water level
Cotton
High Default Default
Middle Default-12 min 23.30KHZ
Low Default-25 min 23.70KHZ
draining &reverse1 min 20sec
unbalancedetecting range
20 seclaundry scattering
bubble detection(default water level 25.45KHZ below)
210rpm
Bubble-detecting function operating process
5sec20sec 15sec 5sec 15sec
210rpm
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 10/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 11/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 12/42
11
6. Technical point
3) The other water level data
※ If water level is 15KHZ below or 30 KHZ above , sensor-pressur is out of order so needs changing.
The water data unter each conditon
1st water supply (only preparation) 24.60 1st water supply level to washing tub
Overflow error 20.50 The water supplied reach 2/3 of door
Bubble
detectingatwashing/rinse/dehydrating25.45 Bubble -detecting water level
Bubble detecting rinse water level 22.60 The water level which can detect bubbles
Water level which can open door 24.10 over It is possible to open the door
Water level which can drive heater 24.50(3.5 ℓ) Safety water level of wash heater
Water level which can reset the drain 24.50 The water level can be detected after 1st draining
unit:Khz
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 13/42
12
7. General Error Function
l When an error occurs, this function starts to keep generating error melody sounds and displays error indicators asshown in the followings per corresponding error by blinking in 0.5sec interval until the error status is completely cleared out.In this case, all the driving devices are turned off until the error is cleared out.
1. WATER SUPPLY ERROR
- Display shows ‘ E1’ .- Water Supply Error occurs when water level frequency does not show changes more than 100Hz or water is not supplied
up to the water level presetting for 20 min or more at the time of initial water supply.- The error status can be cleared by turning POWER S/W OFF and resuming the POWER ON initial status.
2. WATER DRAIN ERROR- Display shows ‘ E2’ .- In case the water level frequency is 25.5KHz or less in the initial phase of UNB-detecting cycle.- Water Drain error can be cleared by turning POWER S/W OFF and resuming the POWER ON initial status.
3. OVER-FLOW ERROR- Display shows ‘ E3’ .- Over-Flow error occurs when the water level is in abnormal operation. It can be cleared by turning POWER S/W OFF.
Water is drained prior to POWER S/W OFF and it is forced to be drained for 2 min if a frequency of more than 25.24KHz is detected.
4. DOOR OPEN ERROR- Display shows
‘
door ’
- Door Open error can be cleared by closing the door.
5. UNBALANCE ERROR- Display shows ‘ E4’ .- Laundry load is unbalanced; loosen any tangled laundry.- If only one item of clothing needs washing, such as a bathrobe or jeans, the final spin result might be unsatisfactory and an
“ E4” error message will be shown in the display window.- Unbalance error is cleared by POWER S/W OFF and by resuming the POWER ON initial status.
6. WATER HEATER ERROR- Display shows ‘ E5,E6’ .- In case the water temperature rises by 7°C or more in 1 min. or by 2°C less in 10 min after heating is started.- It can be cleared by turning POWER S/W OFF.
7. ASS’ Y PRESSURE S/W ERROR* Generated Frequency Signal of WATER LEVEL(W/L) S/W (KHz)
- If the same signal as the above table is detected for more than 5 seconds, it is a PRESSURE S/W Error.- When the error occurs, water drain pump will operate for 3 min. and then turn off the water drain pump.
Then the display shows ‘ E7’ indicating a pressure s/w error indicator.
8. ABNORMAL WATER TEMPERATURE ERROR
- In case the water temperature is 50°C or more in Delicate and Wool course.- At the time of initial water supply, if the water temperature is not appropriate, water starts to be drained
and it is forced to be drained for 2 min when the abnormal frequency of 25.24 KHz is detected.- Display shows ‘ E8’ .- This error can be cleared by POWER S/W OFF.
9. WATER LEAKAGE ERROR (E9)- Water Leakage error occures when water is drained naturally after washing program starts.
Level Low Level High Level
Abnormal W/L Frequency 30.00 KHz 15.00 KHz
Course Water Temp
Delicate 50°C or more
Wool 50°C or more
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 14/42
13
7. General Error Function
10. Tacho Error - This error occurs in case motor thaco is out of order or tacho siganals inputted are fewer than 2- "EA" displayed- This error can be cleared by power s/w off
11. Motor Triac short Error - This error occurs in case over 300 per 1 sec tacho signals are inputted power S/w should be off.- "Eb" diplayed.- This error can be cleared by power s/w off
12. Thermistor error - This error occurs, when Thermistor circuit is abnormal or the detected electrical volt is 0.2v below or 4.5v over - "Ec" displayed- This error can be cleared by power s/w off
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 15/42
14
8. Trouble Diagnosis
- As the micom wash machine is configured of the complicate structure, there might be the service call.Below information is prepared for exact trouble diagnosis and suitable repair guide.
Caution for the Repair and Replacement
1) As some electronic components are damaged by the charged static electricity from the resin part of washmachine or the human body, prepare the human body earth or remove the potential difference of the
human body and wash machine by contacting the power supply plug when the work contacting to PCB isexecuted.
2) Since AC220~240V is applied to the triac T1 and T2 on P.C.B, the electric shock may occur by touchingand be careful that the strong and weak electricity are mixed.
3) As the P.C.B assembly is designed for no trouble, do not replace the P.C.B assembly by the wrongdiagnosis and follow the procedure of the trouble diagnosis when the micom is not operated normally.
Please follow below instruction for the trouble diagnosis and parts replacement.
POWER SUPPLY PLUG
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 16/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 17/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 18/42
17
8-2-2. Reset Part
NO
YES
8-2-3. Interrupt Part
The Value Of
Measurement Result Of
Between Micom 26 And
Gnd Is 5V?
Check The Power Source
267042IC3 R22
CE2 1UF
Check IC3
TR12 KSC815Y11
R44 2.2K
R41 4.7K
R45 C16C13
Check The CurveOutput Of ? Check D16 - D19
Check The Micom
Number 11 ?Check TR12, R41
Check The Part Of Oscillator
C15
R23
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 19/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 20/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 21/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 22/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 23/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 24/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 25/42
24
10-3 Heater
1) Capacity : AC 230V/1900W2) Location : Bottom of TUB3) Function : Raise the water temperature
supplied at the wash process.
4) Resistance value : 23~295) Thermal Fuse : 169°C
10-4 Detergent tub and water supply value
A Detergent tub is composed of housing and 3 drawers . supplied water flows into the 3 drawer-detergent tub by
way of classifier at each washing process.
three open drainage way whith detergent and supplied water by way of connector located under the housing flows
into washing tub.the water supply valve is composed of a hot water valve(1 way) and a cold water valve(2way) and water flow per
min in the valve is below.
10-5 Shock absorber and buffer spring
This wash machine is equipped with 2 Shock absorbers with same
capacity and with 2 buffer springs. 2 Shock absorber are placed
under the tub and outside case , 4 buffer springs are placed on the
right and left of the upper side of outside case.
Shock absorber function: during wash, dehydration absorb the shock.
buffer spring: buffering the vibration
device capacity of Shock absorber
Shock absorber 8 ± 2kg
Hot water valve(1 way)
water flow(L/min) 10L
resistance value 4.3
power consumption AC 220v ~ 240V 50/60
usable water pressure 0.5 ~ 8 /
Thermistor
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 26/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 27/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 28/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 29/42
28
11-1. ASSY-PCB Part List
NO. Part Code Code NO Q'ty Description Spercificatio Remark
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
2122
WB002
WB002
WB003
WB004
WB004
WB004
WB004
WB010
WB003
WB006
WB006
WB006
WB006
WB006
WB007
WB008
WB007
WB007
WB009
WB010
WB011WB012
1401-001007
1401-001024
0402-001023
3501-001180
3501-001156
3501-001157
3501-001007
DC26-00005B
0402-000137
0504-000130
DE13-20016A
0504-0001590504-001080
0501-000465
1202-000141
2802-001058
DE13-20017A
1103-001160
DE30-20016A
3404-001022
DE07-20040A0703-001056
1
5
1
1
2
3
1
1
6
2
1
2
2
1
1
1
3
1
1
7
*1
THYRISTOR-TRIAC
THYRISTOR-TRIAC
DIODE-BRIDGE
RELAY-MINIATURE
RELAY-POWER
RELAY-POWER
RELAY
TRANS-FORMER
DIODE-RECTIFIER
TR-DIGITAL
IC-VOLTREGU
TR-DIGITAL
TR-DIGITAL
TR-SMALL
IC-DRIVE
RESONATOR-CERAMIC
IC-DRIVE
IC-EEPROM
BUZZER
SWITCH-TACT
LED LAMPLED DISPLAY
10A,SM10LZ47(TOSHIBA)
2A,SM2LZ47(TOSHIBA)
RBV1506,600V,15A,SIP-4
12VDC,RTE24012
12VDC,0.53W16000MA,1FORMC
12VDC,0.53W16000MA,1FORMC
12Vdc,200mW,5A,(TAKAMISAYA)
450MA,220~240VAC,11VDC
1N4007,1000V,1A
KSR1105
KA7805A
KSR2105
KRC246S
MMBT390X
7033,SOT-89
8MHz,02%,TP,10 × 5× 8mm
KID65003AP,DIP,STICK
4C010,128 × 8BIT,DIP,8P
CBE2220BA,STICK
15V,20mA,130 °± 40gf,6 × 6× 5mm
SLH-34VC70F,RED,T,P15Y-GRN,4dig,7seg,46 × 19 × 24.6mm
TRIAC4
TRIAC2
BD1
RELAY3
RELAY5
RELAY1,2
RELAY6
TRANS
D15~D19
TR3,TR4
TR7
TR1,TR2
TR3,TR4
TR11-13
IC4
RESO
IC3,IC5,IC6
IC2
BZ
SW1~7
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 30/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 31/42
30
12. Setting up a wash machine.
3) Even though adjustment legs came out all the way, if machine is not levled , prop up themachine with the wood or brick to make it even.(Do not use fragile material or slippery material such as laminated paper)
12-2-2 The condition of setting up sink( Disassembled Ass'y- Cover Top)1) Spin the adjustment leg to the left and remove them from the front and rear side of the machine.2) Remove the 4 locking nuts from adustment legs, and put only adjustment legs back whert those were.
3) After removing the fixing screws(each on right, left side) from the machine whichi is behind ass'y- cover top, disassemble the assy-cover top.
4) Install the sink.
340598
8 4 4
1 7
450
340598
8 4
4
1 7
450
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 32/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 33/42
32
13. Assemble and Disassemble
1. ASS’ Y-COVER TOP1) Remove two screws fixing the top-cover on back side.2) Push the top-cover back about 15mm and pull it up.3) It’ s possible to exchange and service Assy-Panel(PCB), the pressure-sensor, the noise-filter,
the water valve and trans(option).
2. FRAME FRONT1) Remove the top-cover and the ass’ y drawer.2) Remove two screws fixing the control-panel on
front side and the screw on right side.3) Remove the cover-front(L) by using the (-)driver.4) Pull the lever and open the ass’ y-door.5) Part the diaphragm and the wire diaphragm
away from the frame-front.6) Remove the eight screws fixing the frame-front.7) It’ s possible to exchange and service the heater,
the pump, the shock-absorber and the door locks/w.
1 5 m m
SCREW
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 34/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 35/42
34
14. Tools for Disassembly and Assembly
NO. TOOL
À Box driver 10mm13mm19mm
Heater (1)Motor (1), Balance (5)1 Pulley hole
Á Double-endedspanner 10, 13,19mm Replaceable for the box driver.
 Vice pliers Tool to protect the idle and abrasion of the bolt for the box driver.
à Other(Driver, Nipper, Long nose) General tools for the after service.
Ä JIG for the Tub 1 (Disassemble and Assemble)
à Ä Á Ã Â
1 9
m m
1 3
m m
1 0
m m
1 7
1 9
1 2
1 3
8
1
0
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 36/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 37/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 38/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 39/42
38
15. PARTS LIST
NO. CODE NO. DESCRIPTION;SPECIFICATION Q'TY REMARK
A057 DC61-70181A SPRING-BUTTON;SEW-745DW,STS304,-,-,-,-,- 1
B006 DC97-02079D ASSY-LEG;SBP2,SD455,SD405,FLANG TYPE/25M 4 FRAME
C007 DC96-00634A ASSY-M.WIRE HARNESS;F1235,EMZ-DOOR 1
C008 DC64-00791C PANEL-CONTROL;R1033,ABS,-,-,-,-,S/WHITE, 1 R1033
C008 DC64-00791B PANEL-CONTROL;R1233,ABS,-,-,-,-,S/WHITE, 1 R1233
C008 DC64-00791D PANEL-CONTROL;R833,ABS,-,-,-,-,S/WHITE,I 1 R833
C010 DC61-10316B CAP-RINSE;SEW-740DR,PP(TB-52),-,-,-,WHT, 1
C010 DC62-00024F VALVE-WATER;B1215J,NYLON66/250TRMN,-,-,N 1
C013 DC63-00455A COVER-TOP;SD455-PJT,ABS,-,-,-,-,-,SNOW/W 1
C021 DC64-00176J INLAY-PANEL;R1033GWC~833GW,PC,T=0.5,-,-, 1 R1033,R833
C021 DC64-00630F INLAY-PANEL;R1233GWC/YLR,ACRYL,-,-,-,HAL 1 R1233
C023 DC32-30006P SENSOR PRESSURE;DN-S14(P1291),TERMINAL-T 1C051 DC97-02297T ASSY-PANEL CONTROL;R1033GWC/CR-BOTTON,WH 1 R1033
C051 DC97-02297S ASSY-PANEL CONTROL;R1233GWC/CR-BOTTON,WH 1 R1233
C051 DC97-02297V ASSY-PANEL CONTROL;R833GW/WHT-BOTTON,WHT 1 R833
C053 DC61-00889A HINGE-DOOR;HAUZEN(DOM),ZNDC,-,-,-,-,-,18 1
F004 DC64-00646A HANDLE-DOOR;SD455-PJT,POM,-,-,-,-,WHT,RO 1
G003 DC97-00139E ASSY-HOSE DRAIN(O);SB-PJT,PP/L1770/CHINA 1 PUMP-MOTOR
G007 DC97-05469R ASSY-PANEL FRONT;F1033,WHT/CHINA 1
G008 DC96-00146A ASSY-POWER CORD;P1291~P6091,250V/16A(PV) 1 FRAME
G009 DC96-00149A ASSY-PUMP DRAIN;P8091/P6091,220~240V/50H 1
G013 DC64-00175B BUTTON-PUSH;FES/START&STOP,ABS,-,-,CR CO 1 R1033,R1233
G013 DC64-00173B BUTTON-PUSH;FES/FUNCTION,ABS(HG-0760),-, 1 R1033,R1233
G013 DC64-00174C BUTTON-PUSH;SEW-HW955/POWER,ABS(HG-0760) 1 R1033,R1233
G013 DC64-00173A BUTTON-PUSH;FES/FUNCTION,ABS(HG-0760),-, 1 R833
G013 DC64-00175A BUTTON-PUSH;FES/START&STOP,ABS,-,-,P/WHT 1 R833
G018 DC64-00693A SHUTTER;SD455,PP,4,-,-,WHT,45CM SLIM 1
G020 DC61-10672A COVER-FRONT(L);SWF-P12,PP(BJ-730),-,-,-, 1
G025 DC62-10289B HOSE-WATER(C);WIP4013SRW,PVC+NYLON,ID10. 1
J006 DC61-00366A BODY-DRAWER;SL-600,TB-53,-,-,-,-,-,- 1
J008 DC29-00006B FILTER-EMI;CDFC-2712R,SLIM,250V,12A,PI38 1J010 DC67-00051B HOSE-DRAWER;Q1636GW/XEU,EPDM,ID9.0,OD14. 0.42 COLD/PRE-WASH
J012 DC61-00708A S PRING-HANGER;F-PJT,HSWR,CD2.8,-,-,L170, 2
J012 DC61-00708B S PRING-HANGER;F-PJT,HSWR,CD2.8,-,-,L181, 2
J014 DC97-06572C ASSY-HOUSING DRAWER;SD-PJT(R),2WAY/COLD/ 1
J014 DC97-02132C ASSY-HOUSING DRAWER;S1093~S6093/2-WAY,SL 1
P001 DC99-00415A ASSY-PAINT;SD455/WHT,COLD 1
P002 DC97-00702A ASSY-FRAME FRONT;P6091,ROUND-TYPE 1
P003 DC97-00417A ASSY-FRAME PLATE(U);SWF-P12,FRAME-PLATE( 1
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 40/42
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 41/42
40
15. Screw/Bolt List
CODE NO. DESCRIPTION SPECIFICATION Q'TY REMARK
DC97-02412A ASSY-BOLT SWF-P12,MOTOR, M8*L62 1 MOTOR
DC97-02412A ASSY-BOLT SWF-P12,MOTOR, M8*L62 1 WEIGHT BALANCE(R)
DC97-02412A ASSY-BOLT SWF-P12,MOTOR, M8*L62 1 WEIGHT-BALANCER(L)
DC97-06080A ASSY-BOLT SEW-3HR107,BOLT+WASHER 1 PULLEY+SHAFT
6011-001421 BOLT-FLANGE M7,L61(29.4),ZPC(YEL),SWRCH18A 1 -
6011-001421 BOLT-FLANGE M7,L61(29.4),ZPC(YEL),SWRCH18A 1 WEIGHT(L)
6011-001492 BOLT-FLANGE M8,L25,PASS,STS304,NYLOCK,P1.25 3 -
6011-001447 BOLT-HEX M8,L123(25),ZPC(YEL),SWRCH18A,WP,NYLOCK 1 WEIGHT(U)
6011-001448 BOLT-HEX M8,L170(25),ZPC(YEL),SWRCH18A,WP,NYLOCK 1 WEIGHT(U)
6011-001499 BOLT-HEX M8,L104.5(50),ZPC(YEL),SWCH10AK,2BODY,DAMPER 2 TUB+DAMPER
DC60-40005A BOLT-HEX M4,L60,ZPC2(YEL),SS41C,-,-,-,- 1 -
DC60-40144A BOLT-HEX M10,L41,ZPC2(YEL),SM10C/DAMPER 2 DAMPER+FRAME
DC60-40146A BOLT-SPANER -,-,OD36,T2.5,L52,FE,FZY,-,P12 1 ACCESSORY
DC61-00201A BRACKET-NUT SBHG-R,P1291,T3,-,-,-,NO-PAINT/MOTOR 1 MOTOR
DC61-00201A BRACKET-NUT SBHG-R,P1291,T3,-,-,-,NO-PAINT/MOTOR 1 -
DC61-40348B BRACKET-NUT SBHG-R,P1291,T3,-,-,-,NO-PAINT 2 -
DC61-40348B BRACKET-NUT SBHG-R,P1291,T3,-,-,-,NO-PAINT 2 -
DC60-50010A NUT-DIAPHRAGM EGI,M4,-,-,2.5TX20X8 1 -
DC60-50010B NUT-DIAPHRAGM EGI,M4.2,-,-,2.5TX20X8 1 -
DD60-50018A NUT-FLANGE -,M5XP0.8,FZY,MSWR10,- 2 HINGE+FRAME
6006-001170 SCREW-ASSY TAPP WS,TH,+,M4,L10,ZPC(YEL) 1 E/W(SUB)+FRAME(F)
6006-001170 SCREW-ASSY TAPP WS,TH,+,M4,L10,ZPC(YEL) 1 B/K-PRESSURE+FRAME
6006-001170 SCREW-ASSY TAPP WS,TH,+,M4,L10,ZPC(YEL) 1 P/CORD(E/W)
6006-001172 SCREW-ASSY TAPP WE,TH,+,M4,L12,ZPC(YEL) 7 FRAME+FRAME FRONT
6006-001172 SCREW-ASSY TAPP WE,TH,+,M4,L12,ZPC(YEL) 4 FRAME+PLATE UPPER
6001-001773 SCREW-MACHINE TH,+,M5,L12, 2 HINGE+FRAME6009-001342 SCREW-SPECIAL TH,+,,M5,L11,ZPC(YEL) 2 FRAME(TOP)
6009-001343 SCREW-SPECIAL PH,TORX,,M4,L10,PASS 1 P/CORD
6002-000213 SCREW-TAPPING TH,+,1,M4,L12,ZPC(YEL),SWRCH18 3 C-PANEL+PCB
6002-000213 SCREW-TAPPING TH,+,1,M4,L12,ZPC(YEL),SWRCH18 1 -
6002-000213 SCREW-TAPPING TH,+,1,M4,L12,ZPC(YEL),SWRCH18 1 TUB-FRONT+PRESSURE
6002-000444 SCREW-TAPPING TH,+,2S,M4,L14,NTR,STS304 2 B/K-HEATER
6002-000445 SCREW-TAPPING TH,+,2S,M4,L18,NTR,STS304 3 PANEL+FRM+HOUSING-D
6002-000471 SCREW-TAPPING TH,+,1,M4,L12,PASS,STS304,- 1 VANE-CHECK
6002-000525 SCREW-TAPPING FH,+,1,M4,L12,PASS,STS304 1 C-PANEL+FRAME
6002-000630 SCREW-TAPPING PH,+,2S,M3,L8,ZPC(YEL),SWRCH18 2 -
6002-000630 SCREW-TAPPING PH,+,2S,M3,L8,ZPC(YEL),SWRCH18 2 B/K+PRE-S/W6002-001006 SCREW-TAPPING TH,+,2S,M4,L12,-,STS410 2 DOOR-S/W
6002-001006 SCREW-TAPPING TH,+,2S,M4,L12,-,STS410 11 -
6002-001006 SCREW-TAPPING TH,+,2S,M4,L12,-,STS410 2 PUMP+FRAME
6002-001327 SCREW-TAPPING PWH,+,1,M4,L12,NI PLT 2 C/TOP+FRAME
6003-000226 SCREW-TAPTITE TH,+,S,M4,L8,ZPC(YEL),SWRCH18A 2 W/V+FRAME
6003-000226 SCREW-TAPTITE TH,+,S,M4,L8,ZPC(YEL),SWRCH18A 1 EARTH
DC60-60040A WASHER-NYLON -,ID10.5,OD32,T2,-,PBSP-1/2H 1 FIXER
DC60-60044A WASHER-PLAIN -,ID10.5,OD30,T3,-,STS304 2 DAMPER+TUB
DC60-60044B WASHER-PLAIN SBC,ID8.4,OD30,T3,-,-,- 1 FIXER
8/11/2019 R1033GW
http://slidepdf.com/reader/full/r1033gw 42/42
ELECTRONICS
©Samsung Electronics Co., Ltd. February. 2004
Printed in KoreaThis Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicableI t ti l d/ d ti l