ra bill 01 -colt bangalore(1)

SUMMARY FOR CIVIL & INTERIORS WORK

P.O

SUMMARY AMOUNTA Civil Works 0.00

B Door & Window 2,752,994.00

C Partitions #REF!

D Ceiling & Flooring 888,923.00

E Built In Furniture 1,296,135.00

F Loose Furniture 1,974,078.00

G Finishes 1,028,355.00

H Plumbing 1,859,314.00

NET TOTAL #REF!

(RUPEES EIGHTY THREE LAKHS ONE THOUSAND NINE HUNDRED ONE AND PAISE FOURTY FIVE ONLY)

E & O.E

Sales Tax Registration Numbers Shriji Kraft Decorators Pvt. Ltd.

ST No :- 001AAKCS8251J

VAT TIN No.29970205361 w.e.f. 01.04.05 Abir Kumar Chakraborty

Proposed Fitout Works for COLT Technology India, Manyata Business Park, Nagavara, Bangalore.

PAN No. AAKCS8251J

SUMMARY FOR CIVIL & INTERIORS WORK

EXECUTED

AMOUNT0.00

858984.50#REF!

213069.00356019.50287995.00

184,768.75 955656.5

#REF!

(RUPEES EIGHTY THREE LAKHS ONE THOUSAND NINE HUNDRED ONE AND PAISE FOURTY FIVE ONLY)

E & O.E

Shriji Kraft Decorators Pvt. Ltd.

Abir Kumar Chakraborty


SHRIJI KRAFT DECORATORS PVT. LTD.

of 79

A CIVIL & WET WORKS Nos L B H Qty

I Dismantling

1

AHU Shaft 6 0.96 1.50 8.64Reception wall 1 3.40 4.98 16.932AHU -01 duct 1 2.15 0.60 1.29AHU -01 duct 1 1.60 0.60 0.96Noc side 1 4.70 0.50 2.35AHU -2 duct 1 2.15 0.60 1.29

1 1.60 0.60 0.961 4.70 0.50 2.35

Café store wall duct 1 0.60 0.70 0.42Total In Sqmtrs 35.192

2 - -

a)1800WX2400HReception Main entrance door 1 1.00Service lift lobby door 1 1.00Total in Nos 2.00

Break out -01 1 5.70 3.76 21.432Break out -02 1 5.70 3.95 22.515Total in Sqmts 43.947

II Masonry and Plaster - - 1

Ups room wall 1 9.8 3.75 36.75Less 1 1.4 -0.32 -0.45

1 1.3 -0.32 -0.421 0.15 -0.32 -0.05

Ups room right side wall 1 10.57 3.75 39.64Less 12 0.15 -0.32 -0.58Ups room door side wall 1 4 3.75 15.00Less door 1 1.65 2.25 3.71


Dismantling/removal and disposal of existing brick wall and trucking away all debris.

Dismantling and removal of existing door frames and lintels. Contractor to visit site and verify. Size of door

Chipping & removing existing screed from floor. Ht of trough to be atleast 80mm & width to be 450mm.

P/F 200mm thk solid block wall with 1:3 cement-sand mortar including 1:6 cement- sand plaster on both sides. Wall should be ready to receive paint.


of 79



1 1.4 -0.32 -0.452 0.15 -0.32 -0.10

Server/Lab room wall 1 18.24 3.75 68.40Less Column 1 0.98 -3.35 -3.28Lessd lab store door 1 1.1 -2.84 -3.12Lab room wall 2 11.3 3.75 84.75Lessd lab store door 1 0.9 -2.84 -2.56server room wall 1 10.6 3.75 39.75Lab supp room wall 1 4.34 3.75 16.28Server &lab passage wall 1 18.58 3.75 69.68Less Column 2 0.95 -3.75 -7.13Lessd lab store door 2 1.65 -2.6 -8.58Janitar & Hnadi cap passage 1 18.58 3.75 69.68Less gents toilet passage 1 1.9 -3.09 -5.87Less handi cap door 1 1.14 -3.09 -3.52Gents toilet wash basin wall 1 3.79 2.82 10.69G.T And Ahu wall 1 8.72 3.2 27.90AHU left side wall 1 4.9 3.7 18.13Ahu door side wall 1 4.9 3.7 18.13Less door 1 1.65 -2.28 -3.76Less toilet door 2 1.9 -0.45 -1.71Ahu -2 left side wall 1 5.9 3.7 21.83Right side wall 1 5.9 3.7 21.83Ahu door side wall 1 5.45 3.7 20.17Less door 1 1.65 -2.28 -3.76Café wash basin wall 1 2.49 3.75 9.34Less duct 1 0.4 -0.4 -0.16Café dish wash room 2 3.66 3.75 27.45Less duct 1 0.4 -0.4 -0.16Less plate drop 1 1.16 -0.4 -0.46less duct 1 0.4 -0.4 -0.16Ladies toilet shaft 2 1.28 3.72 9.52

2 1.01 3.72 7.51Elec room door side wall 1 2.34 3.72 8.70Less door 1 1.1 -2.25 -2.48Elec D.B side wall 1 0.7 3.4 2.38Café door 1 2.4 2.7 6.48Plumbing shaft 1 0.76 0.3 0.23Terrace pipe 5 0.3 0.2 0.30

7 0.3 0.3 0.638 0.45 0.35 1.26

Total in Sqmts 607.36


of 79



2

G.toilet W.C wall 4 1.68 2.85 19.15Door side wall 1 3.79 2.85 10.80Less door 3 0.8 -2.25 -5.40W.C wall 5 1.7 2.85 24.22Door side wall 1 5.24 2.85 14.93Less door 4 0.8 -2.25 -7.20Ent wall 1 6.65 2.85 18.95Less door 1 1.1 -2.25 -2.48Janitar wall 2 1.64 2.85 9.35Less door 1 0.8 -2.25 -1.80Handicap & passage wall 1 1.64 2.85 4.67L.toilet W.C wall 4 1.7 2.85 19.38Door side wall 1 4.8 2.85 13.68Less door 4 0.8 -2.25 -7.20L.Toilet W.C wall 4 1.7 2.85 19.38Door side wall 1 4.8 2.85 13.68Less door 4 0.8 -2.25 -7.20Wash basin wall 2 3.63 2.85 20.69Café store room wall 1 4.77 3.44 16.41Café sdish wash wall 2 0.22 3.72 1.64

2 0.5 3.72 3.72Café hand wash 2 1.36 3.72 10.12L.toilet ent wall 2 0.6 2.4 2.88

1 1.38 2.4 3.31Less door 1 1.1 -2.25 -2.48Gents toilet passage above 2 1.65 0.9 2.97ceiling 1 5.84 0.9 5.26Ahu 1 & 2 2 1.6 0.2 0.64


AHU room pedestal 2 2.65 3.05 0.15 2.42 Terrace 40 0.18 0.15 0.15 1.08

Total in Sqmts 3.50

P/F 100mm thk solid block wall with 1:3 cement-sand mortar including 1:6 cement- sand plaster on both sides. Add appropriate reinforcement bars with 75 thk concrete band at every 6th coarse.

Providing and constructing 150 thk RCC slab 1:2:4 at terrace level with appropriate reinforcements. Rate to be inclusive of all necessary centering, curing, plastering edges & waterproofing (crystalline type), weatherproof coarse on top to slope etc. (For chiller panels)


of 79



4

0 0

a)100W X 100H lintelsGents Toilet passage door 1 1.4 1.4Janitor room door 1 1.1 1.1G.Toilet W.C door 7 1.1 7.7L.Toilet door 8 1.1 8.8L.Toilet main door 1 1.4 1.4

Total in Rmt 20.4

b)200W X 200H lintelsUps room 1 1.95 1.95AHU Rooms 1 & 2 2 1.95 3.90Server room 1 1.95 1.95Lab 1 1.95 1.95Lab store 1 1.4 1.40Lab supp store 1 1.2 1.20Handicap toilet 1 1.4 1.40Ladies toilet 1 1.4 1.40Electric room 1 1.4 1.40Dish wash room 1 1.4 1.40

Total in Rmt 17.95

5

Gents Toilet 1 6.7 8.36 0.3 16.80Handicap toilet 1 2 2.58 0.3 1.55Janitors Room 1 1.93 1.61 0.3 0.93Toilet passage 1 2.66 1.61 0.3 1.28Toilet &server passage 1 9.3 1.90 0.30 5.30Ramp 2 2.9 1.90 0.20 2.20L.Toilet wash area 1 4.87 3.66 0.30 5.35L.toilet W.C area 1 4.8 5.05 0.30 7.27Café Hand wash area 1 2.84 1.85 0.20 1.05

Total in Cmts 41.74

6

Gents Toilet 1 6.7 8.36 56.01Handicap toilet 1 2 2.58 5.16Janitors Room 1 1.93 1.61 3.11

P/F Lintels above doors as required in 1:2:4 R.C.C as per sizes of lintels mentioned below.

Filling floor slab of varying height in toilets with cinder, well compacted. Rate to include necessary curing etc for consolidating cinder. The cinder bed shall be ready to receive hard PCC. Include cost of perimeter building of wall with brick masonry (if required).

Filling floor slab above cinder filling with well compacted and finished 40 thk layer of PCC bed. Rate to include necessary curing etc. Incl 2 layers of water proofing above PCC


of 79



Toilet passage 1 2.66 1.61 4.28Toilet &server passage 1 9.3 1.90 17.67Ramp 2 2.9 1.90 11.02L.Toilet wash area 1 4.87 3.66 17.82L.toilet W.C area 1 4.8 5.05 24.24Café Hand wash area 1 2.84 1.85 5.25Break out-01 1 5.7 3.76 21.43Café glass side 1 21.65 1.40 30.31Wall side 1 10.95 1.43 15.66

1 7.6 2.70 20.52Café store out side 1 4.23 3.25 13.75Café centre 1 15.75 4.80 75.60water dispencer 1 2.45 0.40 0.98

1 1.44 0.30 0.43Electrical room passage 1 4.19 2.36 9.89Electrical room 1 5.14 2.34 12.03UPS room 1 1.7 1.40 2.38NOC room 1 4.83 0.50 2.42


7 - -

B 12mm thk averageInt. room walls 1 2.79 2.7 7.53Column 1 1.88 2.7 5.08Store room & passage 1 5.82 2.7 15.71Store room column 1 0.7 2.7 1.89Stairecase -01 side wall 1 4.53 2.7 12.23Less staircase door 1 1.1 -2.4 -2.64Technical room store 1 8.23 2.7 22.22Less shaft 1 1.98 -0.75 -1.48NOC room -1 window wall 1 12.77 2.7 34.48Less window 1 6.09 -1.64 -9.99NOC -1 wall 1 18.8 2.7 50.76Less shaft door 1 0.73 -2 -1.46Less fireshaft 1 0.89 -1.2 -1.07AHU -1 side out side wall 1 4.9 2.7 13.23AHU -1 door side wall 1 4.9 2.7 13.23Less door 1 1.65 -2.28 -3.76Printer No -03 1 2.73 2.7 7.37Toilet & server passage 1 16.17 2.7 43.66Less toilet entrance 1 1.9 -2.3 -4.37Less handi cap toilet 1 1.1 -2.3 -2.53Less shaft door 1 0.73 -2 -1.46Less Ladies toilet 1 1.1 -2.3 -2.53Server room & lab room wall 1 18.58 2.7 50.17Less server & lab door 2 2.34 -2.7 -12.64Electrical room door wall 2 2.34 3.7 17.32Less door 2 1.1 -2.25 -4.95

Providing & finishing POP punning over cement plaster in line & plumb finished smooth to receive paint of following thickness -


of 79



D.B side wall 1 0.9 2.7 2.432 7 3.7 51.80

Electrical room 1 2.36 3.7 8.73Staircase -2 side wall 1 6.35 2.7 17.15Less staircase door 1 1.7 -2.4 -4.08Service lift lobby wall 1 8.12 2.7 21.92Less door 1 1.8 -2.3 -4.14Medical room wall 1 5.83 2.7 15.74Medical & facility wall 1 5.9 2.7 15.93Ahu -2 door side wall 1 5.46 2.7 14.74Less door 1 1.6 -2.3 -3.68AHU -2 right side & NOC -2 wall 1 5.9 2.7 15.93NOC -2 wall 1 1.78 2.7 4.81NOC -2 & open office wall 1 11 2.7 29.70Less window 1 4.4 -1.6 -7.04Window patta 4 4.4 0.06 1.06

4 1.6 0.06 0.38Window side column 1 5.3 2.7 14.31Window wall column to column 1 11.2 2.9 32.48Less window 1 4.4 -1.6 -7.04Window patta 4 4.4 0.06 1.06

4 1.6 0.06 0.38Column window side 1 5.14 2.7 13.88Window side wall 1 12.8 2.7 34.56Less window 1 11.6 -1.6 -18.56Window patta 2 11.6 0.08 1.86

2 1.6 0.08 0.26West side wall column to column 1 5.85 2.9 16.97Less window 1 8.14 -1.6 -13.02Window patta 2 8.14 0.08 1.30

2 1.6 0.08 0.26Column 1 2.59 2.7 6.99Window wall 1 9.87 2.9 28.62Less window 1 4.4 -1.6 -7.04

2 4.4 0.08 0.702 1.6 0.08 0.26

Column side café 1 2.5 2.7 6.75Service lift lobby wall 1 9.9 2.7 26.73Less door 1 1.1 -2.6 -2.86Column 1 2.2 2.7 5.94Café shaft wall 1 13.67 2.7 36.91Less shaft door 1 0.88 -2 -1.76UPS room & training room column 1 3.6 3.7 13.32UPS room & training room wall 2 9.8 2.7 52.92Ups &lab store & 14 pax wall 2 10.57 2.7 57.08Ups room door side wall 2 4 2.7 21.60Less UPS door 1 1.65 -2.25 -3.71Server & lab wall 1 18.24 3.75 68.40Less door 1 1.1 -2.6 -2.86Lab room wall 4 11.3 3.75 169.50Out side wall 1 11.3 2.7 30.51Less lab sup door 1 0.9 -2.6 -2.34Lab sup wall 2 4.34 3.75 32.55


of 79



Server & break out side wall 1 11.3 2.7 30.51Server out side wall 1 2.7 2.7 7.29Lab room inside column 1 2.7 3.75 10.13Server & passage wall inside 1 18.58 3.75 69.68Less server & lab door 2 1.1 -2.6 -5.72Printer -1 coumn 1 0.77 2.7 2.08Printer -1 14 pax column 1 1.72 2.7 4.64Ups room wall 1 4.55 2.7 12.29Mgr cabin column 1 2.7 2.7 7.29Break out -2 column 1 3.77 2.7 10.18Gents toilet passage wall 2 1.87 2.7 10.10Less janiters door 1 0.8 -2.25 -1.80

2 2.56 2.5 12.80Less gents toilet door 1 1.1 -2.25 -2.48Less gents toilet entrance 1 1.8 -2.25 -4.05Column near staircase -1 side 1 1 2.7 2.7014 pax & server room wall 1 4 2.7 10.80Break out - 1 mgr cabin column 1 1.77 2.7 4.78Break out - 1 side column 1 2.7 2.7 7.29G.T W.C side wall 14 1.66 1.27 29.51 7 1.05 1.27 9.33G.T door side wall 7 1.05 1.28 9.41Less door 7 0.82 -0.88 -5.05Wash basin area door wall 1 6.47 0.15 0.97Wash basin wall 2 1.55 0.15 0.46Urinal wall 1 8.32 0.15 1.25W.C & Door out side wall 1 6.48 0.15 0.97

1 3.83 0.15 0.57W.C out side wall 2 2.1 0.15 0.63L.T w.c side wall 16 1.68 1.3 34.94

8 1.03 1.3 10.718 1.03 1.3 10.71

Less door 8 0.82 -0.87 -5.71W.C out side door wall 2 4.8 0.13 1.25Passage 1 1.31 0.13 0.17W.C out side wall 2 1.73 0.13 0.45Door wall 1 5.93 0.13 0.77Shaft wall 2 2.76 0.13 0.72L.T door side wall 2 0.7 2.54 3.56

1 1.38 2.54 3.51Less door 1 1.1 -2.25 -2.48North side window patta 1 0.4 2.7 1.08Café shaft demolition wall 1 3.7 2.7 9.99Reception right side wall 1 1.6 2.7 4.32Café door closed wall 2 2.4 2.7 12.96Café dstore room wall 1 3.95 2.7 10.67Handicap toilet 1 9 1.2 10.80Less door 1 1.03 -0.97 -1.00


C 19mm thk averageServer room ceiling 72 1.5 1.50 162.00


of 79



145 1.5 1.50 326.25

Total in sqmts 488.25

16 -

0

B 19mm thk AverageInt room wall 1 2.79 3.32 9.26Column 1 1.88 3.32 6.24Store room & passage 1 5.82 3.32 19.32Store room column 1 0.70 3.32 2.32Staire case wall 1 4.53 3.32 15.04Less stair case door 1 1.10 -2.4 -2.64Store room cum store 1 8.23 3.32 27.32Less shaft 1 1.98 -0.75 -1.48NOC -1 window side wall 1 12.77 3.32 42.40Less window 1 6.09 -1.64 -9.99NOC -1 wall 1 18.80 3.32 62.42Less shaft door 1 0.75 -2 -1.50Less fire shaft 1 0.89 -1.2 -1.07AHU -1 wall 1 4.95 3.32 16.43Less 1 0.80 -1.5 -1.20G.Toilet wall 1 8.34 3.32 27.69G.T W.c wall 1 8.50 3.32 28.22Plumbing shaft wall 1 1.40 3.32 4.65Less shaft 1 0.70 -2 -1.40L.T wall 1 5.40 3.32 17.93Electrical room wall 1 2.36 3.7 8.73Less shaft 1 0.88 -2.6 -2.29Elec room & staircase wall 1 7.00 3.32 23.24Staircase -2 wall 1 6.35 3.32 21.08Less staircase door 1 1.70 -2.4 -4.08Servivce lift lobby wall 1 8.12 3.32 26.96Less door 1 1.80 -2.3 -4.14Medical oom 1 5.83 3.32 19.36AHU -2 1 5.00 3.32 16.60NOC -2 wall 1 18.78 3.32 62.35Column to column window side 1 11.00 3.5 38.50Less window 2 4.40 -1.6 -14.08Window patta 4 4.40 0.06 1.06

4 1.60 0.06 0.38

Window side column 1 5.30 3.5 18.55

Window wall column to column 1 11.20 3.5 39.20Less window 2 4.40 -1.6 -14.08Window patta 4 4.40 0.06 1.06

4 1.60 0.06 0.38

Column window side 1 5.14 3.5 17.99Window side wall 1 12.80 3.5 44.80Less window 1 11.60 -1.6 -18.56

P/L normal cement plaster of undermentioned thickness made with 1:3 cement- sand on one side of existing wall / column / RCC structure. Add appropriate chicken wire mesh, hacking where ever required.


of 79



Window patta 2 11.60 0.08 1.862 1.60 0.08 0.26

Window side wall column 1 5.85 2.9 16.97Less window 1 8.14 -1.6 -13.02window patta 2 8.14 0.08 1.30

1 1.60 0.08 0.13

Column 1 2.59 3.32 8.60window wall 1 9.87 3.32 32.77Less window 1 4.40 -1.6 -7.04Window patta 2 4.40 0.08 0.70

2 1.60 0.08 0.26

Column café side 1 2.50 3.39 8.48Service lift lobby wall 1 9.90 3.39 33.56Less door 1 1.82 -2.4 -4.37Column café side 1 2.20 3.39 7.46Café shaft wall 1 13.67 3.39 46.34Less shaft door 1 0.88 -2 -1.76Server room column 1 3.60 3.35 12.06Lab room column 1 3.60 3.35 12.06

1 3.60 3.35 12.06Server room & Mgr cabin 1 3.60 3.35 12.06UPS room column 1 3.60 3.35 12.06Janitor room shat column 1 1.73 3.35 5.80Passage beam 2 6.45 0.3 3.87

2 5.16 0.3 3.10Meeting 14 pax column 1 1.70 2.7 4.59Column near staircase -1 1 1.00 2.7 2.70Reception right side wall 1 1.60 2.7 4.32Café shaft demolition wall 1 3.70 2.7 9.99Electrical jerry filling 1 450 0.3 135.00Total Sqmts 905.11

0

-

0

Providing & laying Italian marble flooring @ appropriate areas as per design. Work rate to be quoted per dimensions mentioned below. Marble to be fixed with cement sand mortar and top layer of white cement, marble shall be mirror polished to architect's approval. The rate shall be inclusive of adding extra mortar (where ever required), chamfering edges, necessary preparation, cleaning, protection with POP, etc. complete. (Color & Lot of Italian marble shall be to Architect's approval). Extra thickness of mortar (45-55mm) to be considered & water proof sealer on all sides to be considered. Marble shall be as mentioned below.


of 79



a

Reception 1 3.74 4.80 17.95 1 2.9 4.15 12.04

Door matt 1 5.38 1.65 8.88

Total Sqmts 38.86

b

Reception left side 4 0.2 0.80Reception back side wall 1 1.89 1.89

1 2.33 2.331 4 4.001 2.31 2.31

Graphic wall 1 4.8 4.80Right side wall 1 3.87 3.87

Total RMTs 20.00

Type A 900 X 900 slab (exact size to approval of architect) on flooring, ramps (with 25mm x 25mm groove in slope), vertical facia in ramp, steps (riser facia to be included in this item), Dado (with 6mm x 6mm birds mouth joint) as per detail, etc.

Type B 100mm high exposed pre polished skirting (with top chamfered edge) at floor level above existing brick wall & column. Skirting to project out by 12mm.


of 79



d 0 - -

f

Gents Toilet 2 3.66 0.61 4.47Ladies Toilet 2 3.6 0.61 4.39Café Hand wash 1 2.45 0.70 1.72

1 1.4 2.31 3.232 0.7 2.31 3.23

Ladies toilet ent 1 1.38 2.32 3.201 1.05 2.25 2.36

Less door 2 -0.7 2.32 -3.25

Total in RMT 19.36

f Sile stone FlooringCafetaria 4 4.8 0.70 19.20

Total in Rmt 19.20

gType G ledge (150 deep) above 115 thk wall

G.toilet 7 0.7 0.20 4.90

L.Toilet 8 0.7 0.20 5.60

Café hand wash 2 1.13 1.18 2.26

Server opp 4 2.4 0.28 9.60

Dish wash window 4 0.34 0.30 1.36

2 1.14 0.30 2.28

3 1.2 0.45 3.60

Granite door frame 2 2.25 0.30 4.50

2 1.01 0.30 2.02

Total in Rmts 36.12

Providing and laying mirror polished 20mm thk Granite slab for flooring / counter top / counter facia / dadoing / dado band as mentioned below. The rate shall be inclusive of necessary base preparation, chasing, making of grooves, cleaning, protection with POP, etc., complete. Colour and size as mentioned below, design as per Architect's approval. Refer fixing details at door frame junctions with respect to cladding. Qty mentioned below are laid qty only & water proof sealer on top, bottom & sides to be considered.

Type C 700mm wide floating counter tops with necessary marine ply (20mm thk) base slab, Brushed SS brackets for supporting base slab & sile stone (20mm thk) counter slab, cutouts for washbasins and plumbing with necessary slope, Edge details & over counter type wash basin fixing & 200mm high front facia. Include cost of counter construction.


of 79



h -

b 1000 x 600Gents Toilet 11 11

Total in Nos 11 - 0

3 Flooring - - - -

AHU Room -1 1 4.7 4.95 23.27

Door patta 1 1.65 0.20 0.33

Pedestal 150mm ht 1 2.65 3.05 8.08

Skirting 2 2.65 0.15 0.79

2 3.05 0.15 0.91

AHU -2 1 5.9 5.00 29.50

Door patt 1 1.65 0.20 0.33

Pedestal 1 2.66 3.05 8.11

Skirting 2 2.66 0.15 0.80

2 3.05 0.15 0.91

Café dish wash 1 2.28 3.67 8.37

Pedestal 1 3.62 0.50 1.81

Café store room 1 2.35 3.00 7.05


Gents Toilet 1 6.65 2.98 19.82

Door side 1 2.1 1.4 2.94

Urinal side passage 1 5.34 1.4 7.48

W.C door passage 1 5.24 1.4 7.34

Type H Urinal Divider made of 20mm thk Granite slab of undermentioned sizes with round edges. Divider to be grouted in existing wall.

Providing, fixing & Laying 19mm thk "Under mentioned Tile" on floor & dado as per design & manufacturer's instruction. Cost to include Preparation of subfloor to plumb level with normal PCC coarse, base mortar upto 40mm thk in ratio 1:4 ( 1 part of cement to 4 parts of sand) with appropriate slope as per architects instructions, Laying tiles on a thin cement slurry paste & necessary protection after laying. Gap for expansion of tiles to be left as per manufacturers instructions. Tile joints to be filled with water sealant (2mm wide grout) of approved color by architects. Laying & fixing details as suggested by the manufacturer to be followed. Extra thickness of mortar (45-55mm) to be considered.

a) Green Kota Tile (600mm x 600mm) all exposed edges to be polished.

c) Vitrified tiles type-1 (antiskid) basic cost 90/sft


of 79



W.C inside 7 1.46 1.05 10.73

Janitor room 1 1.92 1.64 3.15

Handicap toilet 1 1.96 2.35 4.61

1 0.2 1.08 0.22

Ladies ToiletWash Basin area 1 4.77 3.6 17.17

Less shaft 1 1.7 -1.06 -1.80

Less door wall 1 1.7 -0.6 -1.02

W.C door passage 1 4.81 1.31 6.30

W.C inside 8 1.5 1.05 12.60


Break out -1 1 5.7 3.76 21.43

Less column 1 0.96 -0.94 -0.90

Break out -2 1 5.7 3.95 22.52

Less column 1 0.94 -0.94 -0.88

Reception 1 7.98 1.43 11.41

1 3.85 1.4 5.39

Café glass side 1 21.65 1.4 30.31

1 10.95 1.43 15.66

1 7.6 2.7 20.52

1 4.23 3.25 13.75

Less column 1 0.95 -0.9 -0.86


Café centre 1 15.75 4.8 75.60

Less sail stone 4 0.7 -4.8 -13.44

Hand wash side wall 2 1.36 -0.15 -0.41

1 2.45 -0.2 -0.49

Café break out side 1 0.75 0.78 0.59

1 1.25 0.78 0.98

1 0.4 0.78 0.3121 0.3 0.78 0.234

Café water dispencer 1 2.45 0.4 0.981 1.44 0.3 0.432


Skirting

d) Vitrified tiles type-2 (antiskid) basic cost 90/sft

e)Vitrifed tiles type-3(antiskid) basic cost 90/sft

Providing & fixing pre polished skirting of undermentioned Tile / slab on skirting as per design & manufacturer's instruction. Cost to include Preparation of sub surface to plumb level, preparation of thin layer of cement slurry in ratio 1:3 (1 part of cement to 3 parts of water) to be applied to tile & fixed to surface, necessary protection of tiles after fixing.

a) Providing & fixing 19mm thk "granite slab" skirting on walls/Columns. All exposed sides to be polished.


of 79



4 DadoingA

Gents Toilet door wall 1 6.47 2.4 15.53Less door 1 1.05 -2.25 -2.36Wash bashin wall 2 1.55 2.4 7.44Urinal wall 1 8.3 2.4 19.92Urinal right side wall 1 1.4 2.4 3.36W.C out side wall 1 2.18 2.4 5.23

1 1.85 2.4 4.441 2.25 2.4 5.40

W.C door passage wall 1 5.24 2.4 12.58Less door 4 0.75 -2.07 -6.21

1 3.84 2.4 9.22Less door 3 0.75 -2.07 -4.66W.C inside wall 14 1.66 1.25 29.05Less ledge wall 7 0.19 -1.22 -1.62W.C wall 7 1.05 1.46 10.73W.C door wall 7 1.05 1.25 9.19Less door 7 0.75 -1.25 -6.56Handicap side wall 1 1.8 1.25 2.25

1 2.9 1.25 3.63Less ledge wall 1 0.19 -1.2 -0.23W.C wall 1 1.96 1.45 2.84Door wall 1 1.28 1.25 1.60Less ledge wall 1 0.19 -1.2 -0.23Ladies ToiletDoor side wall 1 5.97 2.4 14.33Less Door 1 1.04 -2.23 -2.32W.C out side wall 2 1.74 2.4 8.35W.C door wall out side 2 4.81 2.4 23.09Less Door 8 0.75 -2.06 -12.36W.c inside wall 16 1.67 1.25 33.40Less ledge wall 8 0.2 -1.21 -1.94W.C wall 8 1.05 1.45 12.18W.C door wall 8 1.05 1.25 10.50Less doors 8 0.75 -1.25 -7.50Shaft wall 2 1.06 2.4 5.09

2 1.7 2.4 8.16Café hand wash wall 2 1.36 2.55 6.94

2 0.71 2.3 3.27Café dish wash wall 1 4.8 2.55 12.24Less window 1 1.04 -0.34 -0.35Less step flooring 1 2.84 -0.15 -0.43

b) Green Kota tile with all exposed surfaces polished.

P/F 600 x 600 mm Glazed Vitrified wall tiles @ indicated locations, shade to architect's approval, provide 4mm chemical grout using plastic spacers. Base mortar 1:4. The rate shall be inclusive of necessary preparation, cleaning, protection with POP, etc. complete. Basic Cost of tile shall be Rs 45/Sft


of 79



Café dish wash door wall 1 2.88 2.55 7.34Less door 1 1.04 -2.23 -2.32Café dish wash sop dispencer 1 3.24 2.45 7.94Dismantled Tiles 30 0.6 0.6 10.80

Total Sqmts 256.93

c

Gents Toilet wash basin area 2 3.6 2.55 18.36Ladies toiet 2 3.6 2.55 18.36Café feature wall 1 4.8 2.55 12.24Café wash area 1 2.45 2.3 5.64


5

Ahu Rooms 2 1.65 2

Total in Nos 2

P/F 900 x 450 mm Unglazed Vitrified wall tiles @ Hand Wash Back counter, shade to architect's approval, provide 4mm chemical grout using plastic spacers. Base mortar 1:3. The rate shall be inclusive of necessary preparation, cleaning, protection with POP, etc. complete. Basic cost of tile Rs 210 /sft.

Kota stone threshold of size 1650 x200x200mm


of 79



AHU cum store room 1 8.4 3.70 31.08Less door 1 1 (2.25) -2.25Technical room 1 4.2 3.70 15.54Less door 1 1 (2.25) -2.25Staircase -1 side store room 1 8.83 3.70 32.671Less store room door 1 0.95 (2.20) -2.09Less mtg room glass & door 1 2.25 (2.00) -4.5Store, meeting, mgr cabin centre 1 4.1 3.70 15.17Store & int room centre 1 8.73 3.70 32.301Mgr & 10 pax & 6 pax meeting room 1 10.47 3.70 38.739Less 10 pax meeting room door 1 1.05 (2.20) -2.31Less glass & door 1 2.25 (2.00) -4.5Int room & 10 pax centre partition 1 3.46 3.70 12.80210 pax & 6 pax meeting 1 8.97 3.70 33.189Less door 1 0.9 (2.60) -2.34Less glass & door 1 2.7 (2.60) -7.026pax meeting & reception back side 1 4.7 3.70 17.39

"A1" - P/F 66 mm thk partition framework comprising of 50x25mm aluminum stud (16 guage min) @ 600mm x 600mm distance running upto roof slab and one base layer of 8mm thk ply on both sides of stud cladded upto false ceiling level (atleast 75mm above false celing level).Include one layer of gypsum cladding above false ceiling to the true ceiling on both sides of framework. Include 50mm thk mineral fibre wool / glass wool insulation of 48kg/cum density from raw floor upto roof slab. (Rate inclusive of supply & filling with insulation material). 8mm thk ply ready to receive finishing material such as gyp board / veneer panelling (8mm thk ply + 4mm thk veneer) / laminate panelling (12mm thk ply + 1mm thk laminate) / glass writing board (6mm thk or 8mm thk saint gobain make with 6mm / 4mm thk ply backing / color back glass / duco painted glass / lacquered glass as per detail of individual rooms & detail mentioned in item 2 to 9 below & hardwood (scantelling of 8mm ply for fixing of skirting).

note: bottom of slab is app. +3400 (check on site before quoting); contractor to provide requisite bracing to reinforce partition. Only one side of partition shall be measured for quantities upto false ceiling only. Rate not to include supplying & installing skirting. Cut outs where ever required (for AV camera placing, light fixture etc) to be considered.


of 79



Door side 1 3.16 3.70 11.692Less glass & door 1 1.4 (2.60) -3.64Mgr cabin centre partition 2 3.69 3.70 27.306Mgr cabin & 14 pax centre partition 1 2.75 3.70 10.17514 pax meeting & Mgr cabin 1 6.92 3.70 25.604Mgr cabin & pinter stn centre partition 1 2.75 3.70 10.175

Mgr cabin & 14 pax door side partiotion 1 13.29 3.70 49.173

Less door 3 2.25 (2.20) -14.85Less glass & door 1 1.05 (2.20) -2.3114pax left side partition 1 6.2 3.70 22.94centre partition 1 7.07 3.70 26.15914pax meeting & training room 1 9.89 3.70 36.593Less 14 pax door 1 1.05 (2.20) -2.31Less training room glass & door 1 1.58 (2.20) -3.476NOC room side partition 1 15.1 3.70 55.87Less NOC door 1 1.11 (2.20) -2.442Printer ceing above partition 1 3.48 1.08 3.7584

1 2.15 1.08 2.322Printer side partition 1 0.78 3.70 2.88614 pax door side partition 1 3.74 3.70 13.838Less 14 pax door 1 1.11 (2.20) -2.44214 pax meeting & lab store centre partition 1 3.67 3.70 13.579

Printer stn -2 ceiling above 1 2 0.70 1.41 1.92 0.70 1.344

Printer stn , Mgr cabin back side partition 1 10.75 3.70 39.775

Mgr cabin center partition 2 2.94 3.70 21.756Mgr cabin door side partition 1 7.92 3.70 29.304Less glass & door 2 2.25 (2.20) -9.9Mgr cabin column side 1 3.02 3.70 11.174Mgr cabin center partition 2 3.86 3.70 28.564Mgr cabin door side partition 1 5.13 3.70 18.981Less glass & door 1 1.97 (2.20) -4.334Less glass & door 1 2.25 (2.20) -4.95Printer stn -3 side partition 1 0.77 3.70 2.849Medical room door side partition 1 4.83 3.70 17.871Less medical room door 1 1.97 (2.20) -4.334Facility room 1 4.29 3.70 15.873Less door 1 1.1 (2.20) -2.42Facility room right side partition 1 2.83 3.70 10.471NOC -2 door side partition 1 13.16 3.70 48.692Less door 1 1.1 (2.20) -2.42Reception glass above 1 1.4 1.10 1.54

1 1.43 1.10 1.573Café store out side 1 2.8 1.10 3.08

1 1.75 1.10 1.9256 pax mereting room 1 4.19 3.70 15.503Less door 1 2.35 (2.20) -5.17Panelling in int.room 1 1.36 2.65 3.60Reception Tablr side 1 3.81 2.12 8.08

1 1.9 2.80 5.32


of 79



Café boxing 1 2.75 2.45 6.741 2.82 2.60 7.331 2.74 2.45 6.711 2.82 2.60 7.331 1.76 2.45 4.31



of 79



AHU cum store room 1 8.4 3.70 31.08Less door 1 1 (2.25) -2.25Technical room 1 4.2 3.70 15.54Less door 1 1 (2.25) -2.25Staircase -1 side store room 1 8.83 3.70 32.671Less store room door 1 0.95 (2.20) -2.09Less mtg room glass & door 1 2.25 (2.00) -4.5Store, meeting, mgr cabin centre 1 4.1 3.70 15.17Store & int room centre 1 8.73 3.70 32.301Mgr & 10 pax & 6 pax meeting room 1 10.47 3.70 38.739Less 10 pax meeting room door 1 1.05 (2.20) -2.31Less glass & door 1 2.25 (2.00) -4.5Int room & 10 pax centre partition 1 3.46 3.70 12.80210 pax & 6 pax meeting 1 8.97 3.70 33.189Less door 1 0.9 (2.60) -2.34Less glass & door 1 2.7 (2.60) -7.026pax meeting & reception back side 1 4.7 3.70 17.39Door side 1 3.16 3.70 11.692Less glass & door 1 1.4 (2.60) -3.64Mgr cabin centre partition 2 3.69 3.70 27.306Mgr cabin & 14 pax centre partition 1 2.75 3.70 10.17514 pax meeting & Mgr cabin 1 6.92 3.70 25.604Mgr cabin & pinter stn centre partition 1 2.75 3.70 10.175

Mgr cabin & 14 pax door side partiotion 1 13.29 3.70 49.173

Less door 3 2.25 (2.20) -14.85Less glass & door 1 1.05 (2.20) -2.3114pax left side partition 1 6.2 3.70 22.94centre partition 1 7.07 3.70 26.15914pax meeting & training room 1 9.89 3.70 36.593Less 14 pax door 1 1.05 (2.20) -2.31Less training room glass & door 1 1.58 (2.20) -3.476NOC room side partition 1 15.1 3.70 55.87Less NOC door 1 1.11 (2.20) -2.442Printer ceing above partition 1 3.48 1.08 3.7584

1 2.15 1.08 2.322Printer side partition 1 0.78 3.70 2.88614 pax door side partition 1 3.74 3.70 13.838Less 14 pax door 1 1.11 (2.20) -2.44214 pax meeting & lab store centre partition 1 3.67 3.70 13.579

Gyp board pannelling - P/F 12.5 mm thk gypboard pannelling on item 1 (as mentioned ablove). One base layer of 12mm thk gyp bd on one sides of stud cladded upto false ceiling level as per manufacturer's specification ("India Gypsum," make) on both sides along its entire length. (Rate inclusive of GI corner beeds, hardwood scantelling and other GI accessories finished with proprietary topcoat ready to receive paint).


of 79



Printer stn -2 ceiling above 1 2 0.70 1.41 1.92 0.70 1.344

Printer stn , Mgr cabin back side partition 1 10.75 3.70 39.775

Mgr cabin center partition 2 2.94 3.70 21.756Mgr cabin door side partition 1 7.92 3.70 29.304Less glass & door 2 2.25 (2.20) -9.9Mgr cabin column side 1 3.02 3.70 11.174Mgr cabin center partition 2 3.86 3.70 28.564Mgr cabin door side partition 1 5.13 3.70 18.981Less glass & door 1 1.97 (2.20) -4.334Less glass & door 1 2.25 (2.20) -4.95Printer stn -3 side partition 1 0.77 3.70 2.849Medical room door side partition 1 4.83 3.70 17.871Less medical room door 1 1.97 (2.20) -4.334Facility room 1 4.29 3.70 15.873Less door 1 1.1 (2.20) -2.42Facility room right side partition 1 2.83 3.70 10.471NOC -2 door side partition 1 13.16 3.70 48.692Less door 1 1.1 (2.20) -2.42Reception glass above 1 1.4 1.10 1.54

1 1.43 1.10 1.573Café store out side 1 2.8 1.10 3.08

1 1.75 1.10 1.9256 pax mereting room 1 4.19 3.70 15.503Less door 1 2.35 (2.20) -5.17Int room side 1 1.36 2.65 3.604Reception table side 1 3.81 2.12 8.0772

1 1.9 2.80 5.32Cfe boxing 1 2.74 2.45 6.713

1 2.82 2.60 7.332Panelling in int.room 1 1.36 2.65 3.60Panelling in int.room 1 1.36 2.65 3.60Reception Tablr side 1 3.81 2.12 8.08

1 1.9 2.80 5.32Café boxing 1 2.75 2.45 6.74

1 2.82 2.60 7.331 2.74 2.45 6.711 2.82 2.60 7.331 1.76 2.45 4.31

Total in sqmts 804.45


of 79



Reception left side 1 2.94 2.70 7.94Less glass 1 0.7 (2.60) -1.82Nishe patta 2 1.22 0.20 0.49

2 0.8 0.20 0.32Glass sode patta 1 0.7 0.20 0.14

2 2.6 0.20 1.04Reception table back side 1 4.02 2.70 10.85Less gyp partition 1 3.61 (2.12) -7.65

1 1.9 2.80 5.32Mgr cabin reception side 1 4.09 0.20 0.82Break out -01 side 1 3.67 0.20 0.73Printe-1 side mgr cabin 2 3.47 0.20 1.39

1 3.02 0.20 0.60Breakout -2 mgr cabin 1 3.66 0.20 0.73Traing Room 2 10.4 0.20 4.16


Maple Veneer pannelling - Panel (on item 1 as mentioned above) shall comprise of veneer (4mm thk melamine polished) along with base panel of 8mm thk ply. Rate to include fabrication of grooves in veneer panelling of size 4mm / 10mm / 12mm (as per design) with paper veneer on front inner facia of groove / detail. All edges of groove to be melamine polished. Rate to include complete fixing of veneer panel & 8mm thk ply, melamine polish / stained as per architects approval. Edges to be finished with maple wood (melamine polished / stained) to architects approval.


of 79



Training room 2 10.4 0.60 12.48


MGr cabin reception side 1 4.09 1.33 5.440Mgr cabin break out 2 3.67 1.33 9.762Printer 01 side mgr cabin 1 3.47 1.33 4.615

2 3.47 1.33 9.2301 3.02 1.33 4.017

Break out -02 side 1 3.86 1.33 5.134


Laminate pannelling - Panel (on item 1 as mentioned above) shall comprise of Laminate (1mm thk min) along with base panel of 12mm thk ply. Rate to include making of grooves (if required) in laminate panelling of size / detail. All edges of groove to be laminate finished. Rate to include complete fixing of laminate panel & 12mm thk base ply. Exposed edges to be finished with maple wood (melamine / stained) to architects approval.

Fabric panel inside conference room fixed on partition -Panel shall comprise of veneered surround (50thk & 50 wide) with fabric wrapped 12thk Salotex softboard on top. Base shall be made of hardwood stud finished with 12mm thk ply and 4mm thk melamine polished maple veneer on side facia and front facia as per details. Base shall receive 12mm thk Salotex make softboard panel wrapped with fabric (Basic cost of fabric shall be Rs 600 per meter). Salotex board shall have al. U channels around its edges.

Feature Light box -P/F 19mm Ply Boxing finished with Polished 4mm Maple Veneer on exposed sides & white balancing Laminate inside to house T-5 Tube fittings.8mm toughened glass with 3M frosting film is fixed onto the boxing using Brushed finish 15mm dia SS studs.as per details.Skirting shall be 100mm aluminium skiritnd in flush with veneer as per details.Size of Light box as mentioned below.Rate not include Light Fittings.


of 79



a)1450LX1650HX200WBreak out 1 &2 4 4Printer 1 2

Total in Nos 6

b)1650LX1650HX200WCafetaria 10 10

Total in Nos 10


of 79



Reception side 10 pax 1 3.43 2.25 7.72 Break out -1 side 14 pax 1 3.58 2.25 8.06 Training roomside 14 pax 1 4.08 2.25 9.18 Training roomside 14 pax 1 6.53 2.25 14.69 Ups room side 14 pax 1 3.66 2.25 8.24

1 1.36 2.65 3.60 Reception left side 1 2.94 2.80 8.23 Less galss 1 0.7 (2.60) (1.82)Reception table back side 1 4.02 2.80 11.26

"A1a" - P/F 66 mm thk Double side partition comprising of 50x25mm aluminum stud (16 guage min) @ 600mm x 600mm distance and one layer of 8mm thk ply + 8mm thk ply on eithier sides . The layer of 8mm thk ply will start above false ceiling and will continue till bottom of raw slab as per manufacturer's specification ("India Gypsum," make) along its entire length. Include 50mm thk mineral fibre wool / glass wool insulation of 48kg/cum density (Rate hardwood scantelling and other GI accessories finished topcoat ; contractor to provide requisite bracing to reinforce partition. Rate not to include supplying & installing skirting. Measured from above false ceiling to True Ceiling (consider 8mm thick ply on both the sides only)

"A4" - P/F glazed partition comprising of 12mm thk tempered edge polished glass to be fixed on U channel (MS powder coated 12mm x 19mm) in floor with normal rubber gasket. Include cost of framework to hold glass above false ceiling & openable teak wood beading at false ceiling level to hold glass. Include one layer of gypsum cladding above false ceiling to the true ceiling on both sides of framework and 50mm thk mineral fibre wool / glass wool insulation of 48kg/cum density. Also include cost of 3M crystalline etching film (75% area) of glass. size of beading shall be 12mm thk x 35mm finished with paint to match ceiling color. Size of glass panel to be minimum 1000mm Length and height of glass to be 2600mm+ 12mm overlap above & below. Cost to include filling joints with silicon sealant where ever applicable.


of 79



1 1.9 2.80 5.32 1 3.81 2.12 8.08

- Total in Sqmts 82.55

Ent Reception 2 1.32 2.60 6.86Int room 1 0.32 2.60 0.83Reception left side 1 0.72 2.60 1.87Back side 1 1.42 2.60 3.69

1 1.42 2.60 3.69Reception right side 1 1.5 2.60 3.90

1 0.61 2.62 1.60Café & passage centre 1 25.41 2.62 66.57Less light box 5 1.65 (1.65) -13.61Service lift 1 2.72 2.62 7.13Less door 1 1.1 (2.62) -2.88Café store right 1 1.75 2.62 4.59Less door 1 1.06 (2.62) -2.78

Total inSqmts 81.46

Café store side partition 2 3 3.74 22.44Less store door 1 1.05 (2.24) -2.35Café store room out side partition 2 8 3.74 59.84

"A4" - P/F glazed partition comprising of 12mm thk tempered edge polished glass to be fixed on U channel (MS powder coated 12mm x 19mm) in floor with normal rubber gasket. Include cost of framework to hold glass above false ceiling & openable teak wood beading at false ceiling level to hold glass. Include one layer of gypsum cladding above false ceiling to the true ceiling on both sides of framework and 50mm thk mineral fibre wool / glass wool insulation of 48kg/cum density. Also include cost of 3M crystalline etching film (75% area) of glass. size of beading shall be 12mm thk x 35mm finished with paint to match ceiling color. Size of glass panel to be minimum 1000mm Length and height of glass to be 2600mm+ 12mm overlap above & below. Cost to include filling joints with silicon sealant where ever applicable.

Boxing of various sizes for partition in 50 X 50 Aluminum studds finished with 12thk base ply and 12 thk MDF finished with Duco paint as approved by the architect with necessary surface prepration etc., complete. The wooden framework to extend upto false ceiling height.


of 79



Less glass & door 1 1.78 (2.60) -4.63 Less glass 1 1.52 (2.60) -3.95Café passage side glass 1 27 1.06 28.62Reception main partition 1 5 0.74 3.70Noc room -1 1 2 3.74 7.48

1 1.6 3.74 5.98


1 1

P/F Pantry counter unit - Low height undercounter storage unit with Shutters fabricated out of 12mm thk ply finished with laminate internally & externally & 150ht drawer unit (laminated externally & internally) with telescopic channels (with MDF duc painted division in drawer). Include 50mm thk 12mm ply patrion finished with Maple Laminateon both sides upto 2400mm lvl.Carcuss to be fabricated out of 19mm thk marine ply finished with laminate on sides, back facia of wall & flooring to be finished with ceramic tiles (basic cost 40/sft) with water proof adhesive. Counter top to be finished with 20mm thick Choco-Brown Granite on 25mm thk marine ply base, with the edge of the partition to be 25mm thk. Undercounter storage to have a adjustable shelf inside at 380mm level (internal clear) to be finished with laminate on both sides. Unit to have 8mm thk color back toughened glass (900ht) with 12mm thk marine ply backing above counter, behind fridge closet, behind water dispenser closet & waste bin closet upto overhead open shelves. Counter to have overhead storage unit partly open & partly closed. Inside the Lowht cabinet Slit Cut-out to be provided at the bottom for ventilation.

All surface internal & external on overhead storage to be finished with laminate. Also include open 12mmm thk toughned glass shelves above & behind water dispenser. supported on 'D' brackets. Rate to be inclusive of all necessary hardware - SS cabinet handles 100mm long, locksets, self closing hinges, spring loaded shutter latch inside, all cabinet hardware to be 'KICH' or equivalent complete as per architects approval. Include cost of waste bin (size 600H x 450D x 450W), vertical SS cap edge (50x50) on all front edges. Refer drg-'Pantry details' for details.

a) Size 2900L x 2400H x 750 deep at Cafeteria


of 79



Total in Nos 1.00

2 2

Total in Nos 2.00

Café break out 4 2.41 9.64Printer -1 1 2.6 2.60Printer -2 1 2.6 2.60Break out -1 5 1.25 6.25Break out -2 5 1.25 6.25prointer -3 1 2.6 2.60Printer -4 1 2.6 2.60

Total in Rmt 32.54

Staircase -1 1 8.84 8.84Less door 1 -1.01 -1.01Technical store out side 1 8.5 8.50Less door 2 -1 -2.00Technical store 2 4.1 8.20Less door 1 -1 -1.00

2 4.2 8.40Facility store 2 4.2 8.40

2 4.1 8.20Less door 1 -1 -1.00North side window 1 0.73 0.73

20 1.03 20.601 0.83 0.832 1.01 2.02

Column 5 4 20.00North side window 1 8.39 8.39Noc 1 partition 1 19.5 19.50Less Noc _1 door 1 -1.1 -1.10Less AHU 1 doo 1 -1.65 -1.65

Same as above but without overhead storage units

a) Size 1500L x 1650H x 750 deep at break out

Providing & fixing in place SS edge cap (2mm thk) bend to profile as per architects approval stuck with areldite on edge of partition/boxing/column/wall. Cap to be U shaped 150mm W with 12mm thk ply backing.

P/F 12 X 100mm high melamine polished maple wood skirting - as per details and instructions of the architect. Cost of scantling & support should not be included in cost of skirting. Include cost of PU coating of skirting on all 4 sides. Skirting which has to be stuck on wall has to be done with silicon. INCLUDE COST OF 12MM PLY BACKING IN COST.


of 79



Noc 1 partition 1 15.36 15.36Less Noc _1 door 1 -1.01 -1.01Window side wall 1 4.73 4.73Shaft wall 1 19.8 19.80AHU -1 wall 1 4.83 4.83Printer -4 side 1 3.22 3.22Mgr cabin break out 2 3.68 7.36

1 2.9 2.901 0.55 0.55

Mgr cabin 2 3.68 7.361 2.9 2.901 0.55 0.55

14 pax meeting 2 6.6 13.202 3.58 7.16

Less door 1 -1.1 -1.10Less storage 1 -1.8 -1.80Mgr cabin printer side 2 3.47 6.94Less glass 1 -2.35 -2.35

2 2.74 5.48Mgr cabin out side 1 13.31 13.31Less glass 3 -2.35 -7.05Less door 1 -1.1 -1.10Printer -1 1 2.11 2.11

1 3.22 3.226 pax meeting inside 1 4.02 4.02

1 3.14. 3.141 1.9 1.901 2.79 2.79

6 pax 10 pax & mgr cabin outside 1 10.58 10.581 -2.35 -2.351 -1.1 -1.10

10 pax meeting inside 2 3.42 6.842 3.43 6.86

Less storage 1 -1.8 -1.80Less door 1 -1.1 -1.10

2 5.5 11.00Less glass 1 -0.7 -0.70Mgr cabin ( reception side ) inside 2 4.09 8.18

1 -2.35 -2.352 2.9 5.80

6pax & store room out side 1 5.84 5.84Less glass 1 -2.35 -2.35Less store door 1 -1 -1.00

1 1.68 1.686 pax meeting room insie 2 4.09 8.18

2 3.16 6.32Less door 1 -2.35 -2.35Store room inside 2 2.5 5.00

2 4.1 8.20Less door 1 -1.05 -1.05INT. room inside 2 3.05 6.10Less door 1 -1.32 -1.32

2 3.43 6.86


of 79



Printer 1 to printer -2 passage 1 20.3 20.30Less 14 pax door 1 -1.1 -1.10Less training room door 1 -1.65 -1.65Less UPS room door 1 -1.65 -1.65Less 14 pax door 1 -1.1 -1.10Printer -2 column 1 4.2 4.20Printer -2 left partition 1 3.06 3.06

1 3.23 3.23Printer -2 to break out -2 out side 1 13.94 13.94Less mgr cabin doors 3 -2.35 -7.05Less mgr cabin doors 1 -1.92 -1.92Mgr cabin 2 3.46 6.92Less door & glass 1 -2.35 -2.35

2 2.9 5.80Mgr cabin 2 3.47 6.94Less door & glass 1 -2.35 -2.35

2 2.92 5.84Mgr cabin 2 2.89 5.78Less door & glass 1 -1.95 -1.95

2 3.86 7.72Mgr cabin break out side 2 2.9 5.80Less door & glass 1 -2.35 -2.35

2 3.87 7.74Break out -2 column 1 1.9 1.90Printer stn -3 1 3.75 3.75Service lift wall Medical side 1 6 6.00Less lift door 1 -1.75 -1.75Medical room out side wall 1 1.6 1.60

1 -1 -1.00Medical room inside wall 2 4.86 9.72

1 -1 -1.002 2.84 5.68

6 pax meeting out side passage 1 4.3 4.301 0.8 0.80

6 pax meeting inside 2 4.19 8.382 3.16 6.32

Les door 1 -2.35 -2.35AHU -2 out side 1 6.75 6.75Less AHU -2 door 1 -1.65 -1.65NOC - 2 inside 2 13.16 26.32Coumn 2 0.68 1.36Less Noc -2 door 1 -1.1 -1.10 2 5.87 11.74NOC -2 out side partition 1 13.16 13.16Less door 1 -1.1 -1.10South side window 1 44.4 44.40West side window elec D.B end 1 21.56 21.56Café store out side partition 1 6.78 6.78Less door & glass 1 -1.63 -1.63Centre column 6 4.1 24.60Lab & server out side wall 1 18.6 18.60Less lab & server doors 2 -1.65 -3.30Toilet passage wall 1 16.9 16.90


of 79



Less gents opening 1 -1.9 -1.90Less handicap toilet door 1 -1.1 -1.10Less ladies toilet door 1 -1 -1.00Ladies toilet out side 2 0.7 1.40Electric D. B side 1 0.65 0.65Electric room out side wall 1 1.65 1.65Less electric room door 1 -1.1 -1.10Stair case -2 wall 1 1.75 1.75

1 3.2 3.20Less staircase door 1 -1.06 -1.06Electric room inside 2 5.1 10.20 2 2.34 4.68Less door 1 -1.1 -1.10Less panel 1 -2.85 -2.85Less panel 1 -2.58 -2.5814 pax meeting room inside 2 6.75 13.50

1 4.06 4.06Less door 1 -1.1 -1.10Less storage 1 -1.8 -1.80Training room inside 2 10.4 20.80

2 6.53 13.06Less door & glass 1 -1.65 -1.65Less storage 1 -3 -3.0014 pax printer -2 side 2 6.45 12.90

2 3.45 6.90Less door 1 -1.1 -1.10Less storage 1 -1.8 -1.80Toilet gents passage 2 2.64 5.28Less gents toilet door 1 -1.13 -1.13Less opening 1 -19 -19.00

2 1.61 3.22Less janitors door 1 -0.83 -0.83Ups room 1 1.68 1.68

1 1.06 1.061 1.16 1.16

Total in Rmts 675.83

Café bain merry counter side wall 4 0.75 2.6 10.4Handwash wall 2 0.2 2.45 4.9Dosh wash wall 4 0.18 2.61 10.44Entrance door 2 0.25 2.61 5.22Door to office area 2 0.25 2.61 5.22Glass side 4 0.3 2.45 9.8

Total in Rmts 35.58

P/F 12mm thk corian onto Block wall Partition at various locations as per details using cement mortar adjoining Glass Partitions


of 79



Reception 1 7.85 3.03 23.79 1 -2.45 1.36 (3.33)1 3.79 1.65 6.25

Int room 1 3.5 3.43 12.01 Less column 1 0.9 (0.80) (0.72)Café 1 21.6 1.40 30.24

5 2.95 0.15 2.21 5 6.5 2.15 69.88

Less hand wash wall 2 1.36 (0.15) (0.41)1 2.45 (0.15) (0.37)1 7.64 2.72 20.78

Less drop ceiling 2 1.4 (1.75) (4.90)3 0.6 1.40 2.52

Water dispenser side 1 3.7 1.84 6.81 1 0.4 (0.15) (0.06)

Café store out side 1 4.25 3.00 12.75 1 0.94 (0.89) (0.84)

Passage opp to UPS 5 2.45 1.77 21.68 Café store out side passage 1 8.2 1.45 11.89 Café fridge side 1 3 0.53 1.59 Printer stn -1 1 2.76 3.60 9.94 Printer stn -2 1 3 3.65 10.95 Less column 1 1 (1.00) (1.00)10 pax meeting reception side 1 3.45 0.42 1.45 14 pax meeting 1 3.58 0.42 1.50 14 pax meeting training room side 1 4.1 0.42 1.72 Training room 1 6.55 0.42 2.75 UPS room side 14 pax meeting 1 3.67 0.72 2.64 Printer -3 staircase sie 1 3.32 0.72 2.39 Printer -4 AHU side 1 2.6 0.68 1.77 Break out -1 1 5.74 3.76 21.58 Drop ceiling 2 3.36 1.45 9.74 Break out -2 1 5.68 3.97 22.55

Gypsum board suspended ceiling with proprietary GI steel suspension system as recommended by mfr (INDIA GYPSUM) frames & accessories, 12.5mm thick gyp board sheets, screws, taping, joint grout as per architects approval & manufacturer's instructions. The rate shall be inclusive of making cutout for light fixtures, diffusers, grills etc and making good 12x12mm groove at all junctions of gyp bd ceiling w/ walls. Include white laminate finish inside groove and proprietary GI corner bead as/detail and architect's approval. Note that all exposed vertical surfaces with this same specifications (irrespective of its height) shall be accounted in this item for measurements except cove / pelmet for window blinds / pelmet trough for AV screen.


of 79



Drop ceiling 2 1.45 3.57 10.35 Vertical patta 1 4.74 0.10 0.47 Gents toilet passage 1 1.6 2.65 4.24 Beam 1 1.87 0.36 0.67 G.Toilet inside passage 1 2.2 1.40 3.08 G.Toilet W.C 7 1.1 1.05 8.09 Ladies toilet out side 1 1.4 0.70 0.98 L.Toilet W.C 8 1.1 1.05 9.24 Reception out side 1 5 0.80 4.00 Bain merry counter 6 0.5 0.50 1.50


Type 01 - straight covesBreak out -1 4 3.36 13.44

4 1.45 5.80Break out -2 4 3.57 14.28

4 1.45 5.80

Total in Rmts 39.32

North side open office area 1 3.37 3.371 22.26 22.26

North side open office NOC side 1 4.06 4.061 2.46 2.461 2.72 2.72

South side open office 1 1.62 1.62Centre column 1 4.42 4.42

Making 200 x 300mm cove as/detail in gypboard and POP including plastic emulsion paint matching with gyp ceiling as per architect's approval.. The rate shall be inclusive of necessary framework, making cutout for light fixtures, bulkheads, internal & external vertical facia etc. complete. Cove section includes exposed L-Shaped gyp work. Refer for cove details.

Window pelmets of size 300x150mm in 19mm thk marine ply. Board with hardwood lipping, and fixed to ceiling with hardwood framing complete including painting (three coats with base primer & putty) with plastic emulsion paint. Paint to match shade of false ceiling. Rate to include paint, Alu powder coated 'L' angle of size 25x25mm to pelmet bottom edge. (Rate to include necessary extra hardwood frame where ever required & silicon joint where marine ply board meets window, glass partition or periphery curtain glass) & one layer of gyp board cover. Pelmet to be fixed at 2750mm lvl .


of 79



South side open office corner column 2 4.44 8.881 11.63 11.63

West side 1 8.19 8.191 4.44 4.44

Total in Rmts 74.05

Reception side 10 pax 1 3.43 3.43Break out -1 side 14 pax 1 3.58 3.58Training room side 14 pax 1 43.08 43.08Training room side 1 6.53 6.53Ups room 1 3.66 3.66Café feature wall 1 4.8 4.8Plasma side wall 1 2.46 2.46

Total in Rmts 67.54

AV trough – 2800W x 200H x 200W made of 19mm thk ply finished with laminate on all exposed surface. Trough to match with false ceiling level. Contractor to ensure requisite bracing & support to soffit of slab is maintained.


of 79



Flooring

Electrical room 1 5.14 2.34 12.03

Ramp in server room 1 1.75 2.20 3.85

Lab 1 1.87 2.20 4.11

UPS room 1 0.2 1.70 0.34


Staircase -1 side storeTechnical store 1 2.5 4.50 11.25Facility store 1 4.1 4.20 17.22

1 4.1 4.20 17.22

Totasl in Sqmts 45.69

Ramp in server room 1 1.75 2.20 3.85Lab 1 1.87 2.20 4.11UPS room 1 0.2 1.70 0.34

Total in Sqmts 8.30

P/L conductive flooring (2mm thk) of Tarkett TORO EL / Equivalent make (tile of size 600 x 600mm) as main area with heat welded copper seams laid as per manufacturer's specifications to architect's approval. The rate shall be inclusive of necessary preparation, cleaning, protection, earthing point, making floor anti-static etc. complete. Note: only laid quatity shall be measured for payment.

P/F 3.3mm thk PVC vinyl flooring @ stores, utility room as per architect's approvals & manufacturers instruction. Only laid quantity to be measured for payments. LG basic price 60/sft to be considered.

Ramp for False / Access flooring - Providing & fixing in place ramp (sloped) made of 25mm thk marine ply supported on wooden pedstals made out of 25mm thk marine ply. The surface of ramp shall be ready to receive carpet. Cost to include complete finishing of ramp including vertical facia.


of 79

Remaks


of 79

BILL OF QUANTITIES FOR DOORS & WINDOWS WORKS

Sl Description EXECUTED QNT (Cumulative) B DOORS & WONDOWS Qty Units Rate Amount Claim Qnt

Notes:-

6) All wood to be treated with anti- termite and fire- retardant paints.

7) Refer dwg. Nos COLT-I-06-09-00 SERIES for elevations and details.

11) All laminates to be 1mm thk. minimum to architect's approvals.

13) All toilet flush doors to be 32mm thick BWP flush shutters.

18) location of locks in glazed doors shall be at 700mm ht.


% of Work Done

Providing and fixing the following Doors and Door/glass composites, Door shall have frame of 125 x 50mm of Maple wood (melamine polished) for 100mm thk solid block wall / partition & 250 x 50mm of maple wood (melamine polished) for 250mm thk solid block wall.

1) All door frames to be braced upto soffit of ceiling slab as required. All rates to include requisite hardwood frame work to be provided above finished ceilings for supporting glazing sections. Note - floor to ceiling slab ht. = 3400 mm approx.

2) All 4mm thk veneer to be "Maple wood" veneer duly matt melamine polished to architect's approval.

3) All door frames to be duly melamine polished Maple wood to shade as/architects' approvals

4) All door shutter lippings to be 12x38 melamine polished maple wood or duco painted as per specs & architect's approvals.

5) All floor spring, door closer, SS butt hindges (ball bearing 4" ht) shall be "Dorma" make unless specified. All door handles (SS) & locks shall be "Dorset Nika" unless specified. Locks to be for both flush doors and for glazed doors. Locks to be installed at 700mm level fr all doors. Contractors to ensure costing of special lock for glazed doors are taken into account where ever applicable.

8) Contractor to prepare samples of all door frame, shutters& glazing types for architect's approvals if specified by Architects.

9) Contractor to submit sample board for all hardware for architect's approvals prior to ordering any hardware.

10) All melamine polished wood to be seasoned Maple wood to architect's approval

12) contractor shall provide all necessary protection of glass until handover. Contractor to include cost of covering glass on both sides with film for protection against scratch & stains. (basic cost of film shall be 15/sft)

14) Rate should include 3M (crystal quality) etching film as per design where ever applicable.

15) All keys shall be manufactured as per the key schedule. Consider 3 local keys + first level of master key (3 sets) + second level of grand master kex (3 sets) + third level of Great grand master key (3 sets) for every lock.

16) Ventilation grill in doors where ever needed shall be of maple wood section (melamine polished) matching with door frame.

17) All door closer/floor springs to be as per manufacturers specifications as per weight and size of door.

19) Include cost of only center lock for glazed door. The lock to have metal plate & fixed at 700mm ht above FFL on glass shutter.

20) All rebated doors shall have concealed door closure & door hinges. Contractors to include all hardware including hinges, door handle as per achitects approval.

21) Part floor is on the concept of raised / access flooring, any extra cost on account of supports of door & window in false floor shall be included in cost by contractor.

22) All doors with floorspring shall be supported on solid wood blocking below door in raised floor. This boxing to be strong enough to hold the floor spring of door. A sample of this is required for approval. Include cost of this blocking in all doors where ever applicable.

23) Contractors to note that some doors have access control system on them & appropriate provisions for fixing them to be made, especially on tempered glass. Rate for these provisions to be included in cost.


of 79




% of Work Done

1 3 nos 33,531.00 100,593.00 3 50%

2 2 nos 31,558.00 63,116.00 2 50%

3 1 nos 34,517.00 34,517.00 1 50%

4 5 nos 32,545.00 162,725.00 5 50%

5 1 nos 34,517.00 34,517.00 1 50%

6 2 nos 32,545.00 65,090.00 2 50%

7 1 nos 31,558.00 31,558.00 1 50%

8 16 Nos. 27,614.00 441,824.00 16 50%

9 6 Nos. 44,379.00 266,274.00 6 50%

24) All doors which would have access control plates installed to its shutters & supported on floor spring shall have floor spring in such a way that door shutters do not open more 85 degrees thus not getting locked on floor spring when open completely.

25) Hardware - Door Closure - Dorma / Union. Door Stopper - Dorma / Sevax. Lock for Glass shutter - Dorma / Union. Hinges - Dorma / Union / Garg. Fire rated Hinges - Dorma / Union. Level Handle with lock - Dorset / Equivalent. Normal Pull Handles (H-Type, D-Type ets) Kiitch or equivalent. Sliding mechanism - Dorma or Equivalent.

D1 (1100 x 2250) ACD -flush door shutter (38mm thk) cladded on both sides with melamine polished maple veneer, with door frame of size 125 x 50 maple wood section (with rebate) as approved by architect. The rate should be inclusive of a view panel (8mm thk clear tempered float glass of size 200W x 1800H as per design detail) & all hardware complete including concealed door closure, hinges & SS handle.

D1a (1100 x 2250) D5 (1100 x 2100 @ toilet entrance door ) flush door shutter (38mm thk) cladded with one side laminate and other side melamine polished maple veneer, with door frame of size 275 x 50 maple wood section (PU coat on all edges & sides of frames - MRF) as approved by architect. The rate should be inclusive of ventilation grills 900 x 150mm (if required made from maple wood section) & all hardware complete including SS strike plate 200mm ht, door handle etc.

D1b (1100 x 2250), (HANDICAPPED TOILET) flush door with one side laminate and other side melamine polished maple veneer door shutter, with door frame of size 250 x 50 maple wood section (PU coated on all sides & edges of frame - MRF) as approved by architect. Include 200 ht SS kick plate on the bottom of door shutter as / drawing on both sides. The rate should be inclusive of ventilation grills 900 x 150mm & all hardware complete with occupancy indicating lock. Door hinge / hardware to allow & support both side opening.

D2 (1100 x 2250) flush door shutter (38mm thk) cadded on one side with melamine polished maple veneer & laminate on other side, with door frame of size 125 x 50 maple wood section (with rebate) as approved by architect. The rate should be inclusive of all hardware complete including concealed door closure, hinges & SS handle.

D1b (1100 x 2100), (HANDICAPPED TOILET) flush door with one side laminate and other side melamine polished maple veneer door shutter, with door frame of size 250 x 50 maple wood section (PU coated on all sides & edges of frame - MRF) as approved by architect. Include 200 ht SS kick plate on the bottom of door shutter as / drawing on both sides. The rate should be inclusive of ventilation grills 900 x 150mm & all hardware complete with occupancy indicating lock. Door hinge / hardware to allow & support both side opening.

D2a (1000 x 2100 @ Pantry / Storage door) flush door shutter (38mm thk) cladded with one side laminate and other side melamine polished maple veneer, with door frame of size 275 x 50 maple wood section (PU coat on all edges & sides of frames - MRF) as approved by architect. The rate should be inclusive of ventilation grills 900 x 150mm (made of maple wood section) & all hardware complete including SS strike plate 200mm ht.

D3 (900 x 2250) flush door shutter (38mm thk) cadded on one side with melamine polished maple veneer & laminate on other side, with door frame of size 125 x 50 maple wood section (with rebate) as approved by architect. The rate should be inclusive of all hardware complete including concealed door closure, hinges & SS handle.

D4 (800 x 2100, toilet WC door) flush door shutter (32mm thk) cladded on both sides with laminate, with door frame of size 225 x 50 duco painted first quality seasoned teakwood as approved by architect. The rate should be inclusive of & all hardware complete. Include in/out indicator lock.

DW1 – (2350 x 2250) Door made with 12 mm thk clear float tempered glass with mirror polished edges, 3M frosted film (crystal quality) including door frame of size 250 x 50 maple wood section (melamine polished) as approved by architect. The rate should be inclusive of all hardware complete including Dorma center locks, hinges & floor spring.


of 79




% of Work Done

10 1 Nos. 39,448.00 39,448.00 1 50%

11 1 Nos. 49,310.00 49,310.00

12 1 Nos. 47,338.00 47,338.00

13 3 Nos. 34,517.00 103,551.00

14 2 Nos. 34,517.00 69,034.00

15 8 Nos 44,379.00 355,032.00

16 1 Nos 44,379.00 44,379.00

17 1 Nos 43,393.00 43,393.00

DW2 – (1650 x 2250) Training room Door made with 12 mm thk clear float tempered glass with mirror polished edges, 3M frosted film (crystal quality) with door frame of size 250 x 50 maple wood section (melamine polished) as approved by architect. The rate should be inclusive of all hardware complete including Dorma center locks, hinges & floor spring.

GD-2000x2600- Door (Single shutter of 1100mm wide x 2550 on patch fitting - DORMA) / Shutter made with 12 mm thk. Clear float tempered glass with mirror polished edges, 3M frosted film (crystal quality) complete as approved by architect. The rate should be inclusive of all hardware viz. Patch Set & Lock, 1000mm SS handle, complete with requisite holes for lock.

GD1-1100x2600-ACD- Door (Single shutter of 1100mm wide x 2550 on patch fitting - DORMA) / Shutter made with 12 mm thk. Clear float tempered glass with mirror polished edges, 3M frosted film (crystal quality) complete as approved by architect. The rate should be inclusive of all hardware viz. Patch Set & Lock, 1000mm SS handle, complete with requisite holes for lock.

GD2-1100x2600- Door (Single shutter of 1100mm wide x 2550 on patch fitting - DORMA) / Shutter made with 12 mm thk. Clear float tempered glass with mirror polished edges, 3M frosted film (crystal quality) complete as approved by architect. The rate should be inclusive of all hardware viz. Patch Set & Lock, 1000mm SS handle, complete with requisite holes for lock.

GD3-1000x2600- Door (Single shutter of 1100mm wide x 2550 on patch fitting - DORMA) / Shutter made with 12 mm thk. Clear float tempered glass with mirror polished edges, 3M frosted film (crystal quality) complete as approved by architect. The rate should be inclusive of all hardware viz. Patch Set & Lock, 1000mm SS handle, complete with requisite holes for lock.

DW1- 2350x2250 (1250 Fixed + 1000 door) Door (Single Glass shutter of 1000mm wide x 2200 on patch fitting - DORMA) / Glazing composite with 12 mm thk. Clear float tempered glass with mirror polished edges, 3M frosted film (crystal quality) & silicone sealant at edges & joints fixed on partition above & floor below on MS / Aluminum U channel complete as approved by architect. The rate should be inclusive of complete hardwood framework (Melamine Polished) above glazing, all hardware viz. Patch Set & Locks, 1200mm SS handle, complete with requisite holes for lock.

DW2-1900X2250 (800 Fixed + 1000 door) Door (Single Glass shutter of 1000mm wide x 2250) / Glazing composite with 12 mm thk. Clear float tempered glass with mirror polished edges, 3M frosted film (crystal quality) & silicone sealant at edges & joints fixed on partition above & floor below on MS / Aluminum U channel complete as approved by architect. The rate should be inclusive of all hardware viz.Patch Set & Locks floor spring, 1200mm SS handle for both shutters complete with requisite holes for access control.

DW3-1650X2250 (550 Fixed + 1000 door) Door (Single glass shutter of 1000mm wide x 2250l) / Glazing composite with 12 mm thk. Clear float tempered glass with mirror polished edges, 3M frosted film (crystal quality) & silicone sealant at edges & joints fixed on partition above & floor below on MS / Aluminum U channel complete as approved by architect. The rate should be inclusive of all hardware viz.Patch Set & Locks, floor spring, 1200mm SS handle for both shutters complete with requisite holes for access control.


of 79




% of Work Done

18 - 0.00

a 6 nos 69,034.00 414,204.00 6 50%

b 1 nos 64,103.00 64,103.00 1 50%

c 2 nos 59,172.00 118,344.00

19 10 sqm 592.00 5,920.00

20 3 nos 2,466.00 7,398.00

21 - 0.00

750 x 2250 ht 3 Nos 4,931.00 14,793.00900 x 2250 ht 5 Nos 7,397.00 36,985.001100 x 2250 ht 5 Nos 9,369.00 46,845.00

22 10 Nos. 2,170.00 21,700.00

23 10 rm 1,381.00 13,810.00

24 2 Nos. 8,876.00 17,752.00

25 - 0.00

PHA 2000 2 nos 10,848.00 21,696.0026 15 rm 1,183.00 17,745.00

- 0.00Total for Door & windows 2,752,994.00

FIRE RATED DOOR (Fire rated Door 90 min size & no of shutters mentioned below) with vision panel (1800Hx200W) with wired glass, access controlled door of non-metallic, 50mm thk asbestos free composite fire & smoke check shutters comprising of two non combustible boards 12mm thk sandwiching 20mm thk fire resistant filler, of 11/2 hour fire resistance rating conforming to BS:476 part-22, IS:3614 suitable for mounting on MS frame as recommended by Manufacturer, 11/2 hr. fire rated vision glass panel, with heat activated intumescent fire seal strips of size 12x4mm fixed on all three sides except the bottom and the frames. Shutter to be mounted with DORMA SS fire rated hinges with necessary screws and one coat of anti-termite fire resistant primer. Rate shall be inclusive of hardware complete with requisite holes for magnetic lock, heavy duty concealed door closure (dorma). Frame of shutter to be claddded with 4mm thk veneer / laminate to match finishes of door shutter.

FD – 1650W x 2250H double leaf door shutter cladded with 4mm thk melamine polished veneer on both sides.

FD1 - 1100W x 2250H double leaf door shutter cladded with 4mm thk melamine polished veneer on outside & laminated on inside.

FD2 – 1000W x 2250H double leaf door shutter cladded with 4mm thk melamine polished veneer on outside & laminated on inside.

Repainting (enamel painted) of existing FHR doors provided by landlord as/site and architect's instructions.

Repainting (enamel painted) of existing FHR doors provided by landlord as/site and architect's instructions. Include cost of 1 tower bolt, handle for shutter & lock in costing.

Refurbishing existing shaft doors by removing shutter, cutting to exact size & refixing it. Rate to also include cladding it with 4mm thk melamine polished maple wood veeer on office area side, laminating on shaft area side & 12x50mm maple wood trims on doorframes with new dead lock as/site and architect's instructions. Include base coat + 2 coats of enamel paint on edges if applicable.

Providing & replacing locks of existing doors to match the key schedule and the interior door locks. (locks to be as per approval from architects)

Providing & fixing in place architrave for existing MS door frame made out of Maple wood (25mm x 40mm, matt melamine polished) sections. The design of architrave shall be similar to proposed door frames.

Providing & fixing in place shaft doors & frames made of MS angles & sheet (2mm thk) finished with enamel paint as per architects approval. Size of shutter shall be 750 x 1500mm

Dorma Panic Bar - supply & fixing in place below mentioned panic bar on locations as approved by Architects.

Providing & fixing in place architrave for existing MS door frame made out of 19mm thk ply (19mm x 100mm, enamel painted finish) sections. The design of architrave shall be similar to proposed door frames.


of 79

EXECUTED QNT (Cumulative) Certified Qnt Amount


of 79


1.5 50296.5

1 31558.0

0.5 17258.5

2.5 81362.5

0.5 17258.5

1 32545.0

0.5 15779.0

8 220,912.00

3 133,137.00


of 79


0.5 19,724.00


of 79


3 207102.0

0.5 32051.5

858984.5


of 79


FOR CEILING & FLOORING WORKS

Sl Description

D Ceiling & Flooring Qty Units Rate

GENERAL NOTES FOR FALSE CEILING

1 415 Sqm. 735.00

2 -

Type 01 - straight coves 55 Rmt 666.00 3 -

Type 01 - straight coves 80 Rm 641.00

A. All perimeter channels to be proprietory 'Peripheral 'L' angle' in straight profile.

B. Refer draing COLT-I-06-06-01 for details of ceiling.C. A groove of 12mm x 12mm or 4mm x 4mm shall be provided along edge of gyp false ceiling where ever the ceiling meets beam/wall.

Gypsum board suspended ceiling with proprietary GI steel suspension system as recommended by mfr (INDIA GYPSUM) frames & accessories, 12.5mm thick gyp board sheets, screws, taping, joint grout as per architects approval & manufacturer's instructions. The rate shall be inclusive of making cutout for light fixtures, diffusers, grills etc and making good 12x12mm groove at all junctions of gyp bd ceiling w/ walls. Include white laminate finish inside groove and proprietary GI corner bead as/detail and architect's approval. Note that all exposed vertical surfaces with this same specifications (irrespective of its height) shall be accounted in this item for measurements except cove / pelmet for window blinds / pelmet trough for AV screen.




of 79



Sl Description

D Ceiling & Flooring Qty Units Rate 4 85 Rm 690.00

5 5 Smt 4,931.00

Flooring - 1 15 Sqm 5,917.00

2 37 Sqm 888.00

3 65 Rm 1,183.00

4 30 Rm 2,663.00

Window pelmets of size 300x150mm in 19mm thk marine ply. Board with hardwood lipping, and fixed to ceiling with hardwood framing complete including painting (three coats with base primer & putty) with plastic emulsion paint. Paint to match shade of false ceiling. Rate to include paint, Alu powder coated 'L' angle of size 25x25mm to pelmet bottom edge. (Rate to include necessary extra hardwood frame where ever required & silicon joint where marine ply board meets window, glass partition or periphery curtain glass) & one layer of gyp board cover. Pelmet to be fixed at 2750mm lvl .

AV trough – 2800W x 200H x 200W made of 19mm thk ply finished with laminate on all exposed surface. Trough to match with false ceiling level. Contractor to ensure requisite bracing & support to soffit of slab is maintained.

P/L conductive flooring (2mm thk) of Tarkett TORO EL / Equivalent make (tile of size 600 x 600mm) as main area with heat welded copper seams laid as per manufacturer's specifications to architect's approval. The rate shall be inclusive of necessary preparation, cleaning, protection, earthing point, making floor anti-static etc. complete. Note: only laid quatity shall be measured for payment.

P/F 3.3mm thk PVC vinyl flooring @ stores, utility room as per architect's approvals & manufacturers instruction. Only laid quantity to be measured for payments. LG basic price 60/sft to be considered.

Windows cill cladding @ general office area consisting of 4mm thk Maple veneer on 19mm thk marine ply and 32 x 12 edge maple wood beading as per detail all duly melamine polished as per architects approval. Vertical facia on the outer side of cill i.e on external glazing side shall be made with 19mm thk marine ply & finished with exterior Grey paint. Include silicon @ junction of wood / glass. This detail to be same as on level 1 & 2.

Providing and fixing transition profiles "Gradus floor trims - adjustable" at junction of various types of floor (joint of carpet with hard floor, joint of carpet with wooden floor, joint of hard floor with wooden floor etc) wherever necessary as per architects approval.


of 79



Sl Description

D Ceiling & Flooring Qty Units Rate

5 25 Rm 3,452.00

6 10 Rm 888.00

- 7 10 Rm 99.00

8 P/F SS L shaped step cover over ply box. Ht of step shall be 300m 25 Rm 641.00

9 7 Sqm 3,156.00

Total for Ceiling & Flooring Works

Treatment of Expansion joint in ceiling, RCC wall & column - providing & fixing in place expansion joint cover comprising of 70mm thk extruded aluminum frame with clip & fitting system as per manufacturer (C/S group - W70) instructions. Joint size shall be 25mm with horizontal movement of +/- 6mm. No component to be of black color

Providing and fixing transition profiles "SS" at junction of various types of floor (joint of carpet with hard floor, joint of carpet with wooden floor, joint of hard floor with wooden floor etc) wherever necessary as per architects approval.

P/F MS Black Enamel Painted Trough above False ceiling and at junction of Expansion joint.

Ramp for False / Access flooring - Providing & fixing in place ramp (sloped) made of 25mm thk marine ply supported on wooden pedstals made out of 25mm thk marine ply. The surface of ramp shall be ready to receive carpet. Cost to include complete finishing of ramp including vertical facia.


of 79



EXECUTED QNT (Cumulative) Amount Claim Qnt Amount

305,025.00 415 50% 207.5 152,512.50

-

36,630.00 -

51,280.00

% of Work Done

Certified Qnt


of 79



EXECUTED QNT (Cumulative) Amount Claim Qnt Amount% of

Work Done

Certified Qnt 58,650.00 85 75% 63.75 43,987.50

24,655.00

- 88,755.00

32,856.00

76,895.00

79,890.00


of 79



EXECUTED QNT (Cumulative) Amount Claim Qnt Amount% of

Work Done

Certified Qnt 86,300.00

8,880.00

- 990.00

16,025.00

22,092.00 7 75% 5.25 16,569.00

888,923.00 213069.00


of 79

Date: 04.01.2008

BILL OF QUANTITIES FOR BUILT IN FURNITURE

Sl Description EXECUTED QNT (Cumulative) E Built in Furniture Qty Units Rate Amount Claim Qnt

1 -

Type A of size - 6550L X 2250 H X 600 D 1 Nos 88,758.00 88,758.00 1 50%Type B of size – 4050L X 2250 H X 600 D 3 Nos 83,827.00 251,481.00 3 50%Type C of size – 3450L X 2250 H X 600 D 1 Nos 78,896.00 78,896.00 1 50%

- - 2 - -

A size-3500x750x2250mm 1 Nos 78,896.00 78,896.00 1 50%B size-3300x750x2250mm 1 Nos 73,965.00 73,965.00 1 50%c size-2900x750x2250mm 1 Nos 71,993.00 71,993.00 1 50%

- - - - - -

3 2 Rm 8,876.00 17,752.00 2 50%

4 6 Rm 8,876.00 53,256.00

5 7 Rm 9,862.00 69,034.00


% of Work Done

Feature cabinet @ conference room - comprising of low height storage & Gyp boxing on sides with carcass and shutters from best quality comm. blockbard finished with 4mm matt melamine polished maple veneer outside, and all internal surface shall be finished with 1mm thk laminate. Incl. 600D X 32 thk ledge top between gyp boxing. Lege to be supported on under counter storage finished with 4mm matt melamine polished maple veneer. The rate shall include 50 wide melamine polished maple wood surround as per detail drg no FII - 013B for details Incl cost of all hardware- SS d-shaped cabinet handles 100mm long, Lock sets, self-closing hinges, spring loaded shutter latch inside, all cabinet hardware to be `BLUM' or equivalent, complete as per architect's approval. Cost to incl. both side gyp boxing but not gyp partition behind. Include 300x300mm cut-out for cameras & cove for light behind with as per details.

Fax/Printer Counter unit in open office to include low height cabinet, overhead cabinets, pinup boards (fabric on 12mm thk salotex board with Al. U channel around Salotex board) clad with fabric and 100thk low height partition. Carcass and shutters for low height and overhead cabinet shall be of 19mm thk comm block board. Top for the low height cabinet to be of 25mm thk straight edge board. All shutters to have maple laminate (1mm thk) outside and balance laminate inside. Counter top shall have a 150mm ht skirting made of 12mm ply & finished with 1mm thk laminate. Low height cabinet to have cable dump (50mm x 50mm) channel with nylon bristles & O.H. cabinet to have lighting pelmet as per design. (BR of fabric to be Rs 650/- per R.m.) Include hardware- SS d-shaped cabinet handles 100mm long, Lock sets, self-closing hinges, spring loaded shutter latch inside, all cabinet hardware to be `BLUM' or equivalent, complete as per architect's approval. Include a semi ht partition (900 ht) bifurcating the printer counter & floor mounted printer area. Semi ht partition shall be 100mm thk partition fabricated of 60mm x 60mm hard wood stud clad with 19mm thk ply finished with 1mm thk laminate on both sides. Top edge of this partition shall be finished with a capping member 12mm thk x 100mm wide of solid maple wood (melamine polished). Cost to include 2400H SS capping at edges of 100thk partition

Printer Counter - 700 deep, 900high made of 19mm thk comm b/b finished with 1mm thk Maple laminate with laminated shutter/storage below counter

Counter - 700 deep made of 19mm thk comm b/b finished with 1mm thk Maple laminate including key board tray with laminated panelling below counter

Counter - Made of 19mm thk ply finished with 20mm thk Granite(Basic cost 150/sft) with 100mm ht splash band. Counter to be supported on underneath storage. Carcass & shutter made of 19mm thk BWP board finished with laminate externally & internally. Provision for sink to be made on corian counter. Rate to incl complete hardware for storage. Rate to include maple wood (melamine polished) fabricated ventilation grill in every shutter. Counter depth to be 700mm.


of 79

Date: 04.01.2008

BILL OF QUANTITIES FOR BUILT IN FURNITURE

Sl Description EXECUTED QNT (Cumulative) E Built in Furniture Qty Units Rate Amount Claim Qnt


% of Work Done

6 20 Sqm 6,164.00 123,280.00

7 - -

TYPE A finished with 1mm thick Maple laminate on outside. 16 Sqm 7,397.00 118,352.00

6 Sqm 7,890.00 47,340.00

8 17 sqm 6,410.00 108,970.00

9 6 Sqm 8,383.00 50,298.00 6 50%

10 - -

Type a 200 x 200 15 Rm 740.00 11,100.00 Type b 300 x 300 15 Rm 888.00 13,320.00

11 12 Rm 986.00 11,832.00

12 20 rm 789.00 15,780.00

13 12 No 986.00 11,832.00

- Total for built in furniture 1,296,135.00

Providing & fixing DB rnclosure comprising of carcass and shutters constructed from 19mm thk. comm. board finished in Laminate as/ approval, balancing laminate inside.The rate should be inclusive of necessary hardware- SS cabinet handles kich, Lock sets, self-closing hinges, spring loaded shutter latch inside, all cabinet hardware to be KICH or equivalent, complete as per architect's approval. Rate to include 150 X 300 mm wide powder coated aluminium grills. (Note - contractor to coordinate w/ architect & electricals/networking vendor prior to fabrication of shutters for appropriate sizes).

P/F full height storages of size 900w x 450d x 2400 h.with carcass and shutters of 19thk commercial blockboard with 1mm thk balancing laminate inside. Rate to be inclusive of all necessary hardware - SS cabinet handles, locksets, self closing hinges, spring loaded shutter latch inside, all cabinet hardware to be 'KICH' or equivalent complete as per architects approval for the following types

Type C - open shelves finished with 1mm laminate on all surfaces & 12mm x 25mm polished matching Maple wood beading on all exposed edges.

Providing & fixing mirrors @ toilets as per sizes indicated with 12mm thk float glass with mirror polish in the rear side as per detail and mounted on 15mm dia brushed SS studs with 12mm thk ply backing. Provision for light pelmet to be made as per design detail. Refer drg no COLT-I-06-10-00 series for details.

P/F Low height undercounter storage unit with carcass and shutters with 19mm thick comm blockboard finished with 1mm thick laminate. counter top to be finished with 1mm thick laminate, with the edge of the partition to be 32mm thk on both sides. Include 100 high skirting above the counter finished with laminate also 50mm thk polished Maple wd edge beading.. Undercounter storage to have a adjustable shelf inside at 380mm level (internal clear) to be finished with inside white balacing laminate and 4mm thk polished Maple veneer outside. Rate to be inclusive of all necessary hardware - SS cabinet handles 100mm long, locksets, self closing hinges, spring loaded shutter latch inside, all cabinet hardware to be 'KICH' or equivalent complete as per architects approval.

Providing and fixing 16 guage brushed SS sheet (curved edges) of undermentioned size to be installed for access control and exit switches with SS studs screws for fixing. Cost to include necessary holes for cables & equipments, cutting gyp board, supply & fixing 4mm thk rigid PVC sheet (curved on sides) & finishing edges complete.

Column edge protection - to have C/S edge sheet (L - Shaped 37 x 37) in same plane as POP punning. Cost not to include POP punning.

Veneer ledge in meeting room – 250mm deep 75mm thk ledge made out of 15mm thk comm b/b finished with 4mm thk Appd.Maple Veneer & on all sides

P/S of 12mm thk. Glass top and SS bracket with necessary hardware, completed. Size 450*300mm.


of 79

EXECUTED QNT (Cumulative) Amount

0.5 44,379.00 1.5 125,740.50 0.5 39,448.00

0.5 39,448.00 0.5 36,982.50 0.5 35,996.50

1 8,876.00

Certified Qnt


of 79

EXECUTED QNT (Cumulative) AmountCertified

Qnt

3 25,149.00

356019.5


of 79

Date: 04.01.2008

Proposed Fitout Works for COLT Technology India, Manyata Business Park, Nagavara,BILL OF QUANTITIES FOR LOOSE FURNITURE

Sl Description EXECUTED QNT (Cumulative) F LOOSE FURNITURE Qty Units Rate Amount Claim Qnt

1 0.00

a)size 3050x750x1050H 1 Nos 98,620.00 98,620.00

22A 1 Nos 49,310.00 49,310.00

3 18 Nos 5,720.00 102,960.00

4 - 0.00

17 Nos. 7,890.00 134,130.0018 Nos. 23,669.00 426,042.004 Nos. 25,641.00 102,564.00

- 0.00 - 0.00

5 - 0.00

a) 1800 x 1200 10 Nos 13,807.00 138,070.00 10 50%b) 1200 x 1200 8 Nos 7,890.00 63,120.00 8 50%

- 0.006 15 Sqm 3,945.00 59,175.00

7 400 Nos. 937.00 374,800.00 400 50%

8 3 Nos. 5,917.00 17,751.00

9 2 Nos. 8,383.00 16,766.00

10 10 Nos 2,170.00 21,700.00

11 125 Rm 641.00 80,125.00

12 15 Rm 986.00 14,790.00

13 35 rm 986.00 34,510.00

14 0 nos 99.00 0.00

15 10 Sqm 1,775.00 17,750.00

16 1 nos 14,793.00 14,793.00

% of Work Done

Reception Table - Carcuss made of 19mm thk ply finished with Ceramic Tile cladding & Transaction counter made of 6mm corian of appd shade & table top finished with poliseh maple wd veneer with 2 drawer unit of size 450x400x700 veneer as per design detail in Drawing no FI- 008 H Drawing no COLT-I-06-11-05

Security table as per details similar to reception table but no tile cladding & transaction counter on front facia . Refer drawing no COLT-I-06-11-06

900w x 2100hx 600d Slotted Angle Racks (Godrej - REGULAR TYPE).

Providing and fixing on wall the following recessed fixtures of same as lower floors, SS brushed finish :

i) Toilet roll holder (Item code 14.7055.02.140)ii) Soap dispenser (Item code 14.7045.02.002) iv) Wall mounted paper towel dispenser/Hand dryer not consider (Item code 14.7080.02.004)

Providing and Fixing "Alkosign or equivalent" - Astra series magnetic Writing Board. Rate shall include starter kit, fixing etc complete of the undermentioned sizes. Include removal of aluminum beading. Edges to be finished with maple wood beading of size 40w x 19d.

P/F 3M BRAND CLEAR-DOOR MATS Size : BASED ON ACTUAL REQUIREMENT PER SITE CONDITION

Providing Wastebins of size 200 dia, 400 high perforated S.S. as per design and details.

P/F key chest of size 1000 x 1200 made of 19mm thk ply finished with laminate on all sides. Cost to include u-hooks to hold keys.

P/F TV bracket for wall mounting 29" television set. Bracket of size 16" x 4" fabricated out of MS section, duco painted.

Trap Door of size 600 x 600. Provide 75 x 75 teak wood frame above false ceiling. Frame to have rebate to receivedoor made of 19mm thk ply finished with emulsion paint.

Window jamb -sides 400 deep, made of 19mm thk marine ply finished with Nova Fine paint fixed on side MS sheet / wall edge / column edge as provided by builder. Include packing & approx putty.

Window & column jambing to match existing window section - providing & fixing in place wooden members to match existing aluminum members supporting external glazing finished with silver Duco paint matching aluminum color.

P/F 50x50mm 6mm Corian 'L'-Shaped corners as various locations as corner guard upto a height of 2250mm Lvl. partition / column of high traffic area

Installing fire extinguishers on RCC column / Wall. Cost not to include supply of fire extinguishers.

Providing & fixing on glass "3M" Sun control film as per manufaturer's instruction.

P/F diwan 2100 X 900 X 450H in 'Medical Room' with 19mm thick plywood understructure finished with 4mm thk melamine polished maple wood veneer on all external surfaces as per architects approval. Also include side wall panelling with 12mm thick comm. Ply finished with 4mm thick matt melamine polished maple veneer. Rate to be inclusive of spring matress (springwell make - 150thk) and PU pillow of approved make.


of 79

Date: 04.01.2008

Proposed Fitout Works for COLT Technology India, Manyata Business Park, Nagavara,BILL OF QUANTITIES FOR LOOSE FURNITURE

Sl Description EXECUTED QNT (Cumulative) F LOOSE FURNITURE Qty Units Rate Amount Claim Qnt % of Work

Done17 1 nos 118,344.00 118,344.00

18 6 nos 14,793.00 88,758.00

Total for loose furniture 1,974,078.00

Bainmarie counter top with front facia (size 3750L x 1500D x 950H) - counter made of 12mm thk Granite top supported on 19mm thk ply & back facia (50mm ht) with underneath storage (on back side) made of 19mm thk ply finished with laminate internally, shutters (louvered) to be fabricated out of maple wood secion. Front facia of counter to be finised with Granite & storage to be finished with lamiante .Counter to have 50mm ht SS skirting all around (recessed by 100mm on all sides). Include cost of constructing semi ht walls (4 nos on either end of counter) & center pedestal (1750L x 750D x 950H) made of same adjoining counter with Granite top. Size of wall shall be 200W x 1000D x 950H finished with italian marble (mirror polished) cladding on all exposed sides. Top of wall to be finished with 19mm thk ply & 12mm thk corian. Also include single side tray slider on front facia 50mm below counter top & 300mm deep. Tray slider to be made of 12mm corian top supported on framework made of hard wood. Tray slider to include 6mm x 6mm brushed SS box section (3 nos) as inserts. Refer drawing no FI - 031 for details.

Glass posters (900W X 1500H) made of 10mm thk toughened glass poster panel mounted on 38 dia SS stud as per design and detail. Art work to be provided by client. Posters shall be printed on approved 3M make film. Posters shall have a 50mm wide, 75mm deep matt melamine polished Maple wood surround as per design. REF DRG NO:


of 79


5 69,035.00 4 31,560.00

200 187,400.00


of 79


287995.0


of 79

Proposed Fitout Works for COLT Technology India, Manyata Business Park, Nagavara, Bangalore. FOR GENERAL FINISHES WORKS

Sl Description

G Finishes Qty Units Rate Amount

1

Type A - Normal plastic emulsion Paint 1100 Sqm 138.00 151,800.00 Type B - Dark colored Accent Paint with a base coat of oil paint. 250 Sqm 153.00 38,250.00

Type C - Novafine paint for partition / Wall 1200 Sqm 444.00 532,800.00 Type E – Grey paint on soffit of ceiling 275 Sqm 59.00 16,225.00

2 35 rm 207.00 7,245.00

3 65 Sqm 4,339.00 282,035.00

- - Total for Finishes 1,028,355.00

Paint on walls and gypboard/POP ceiling including surface preparation, primer coats, levelling patti and minimum 3 coats of brush and roller finish.

p/f silicone sealant at all areas where partitions abutt external glass wall..

Digital art by 3M - Solvent printed (water proof ink) art work on opaque vinyl to be stuck directly on wall.Art work to be supplied by client


of 79

Proposed Fitout Works for COLT Technology India, Manyata Business Park, Nagavara, Bangalore. FOR PLUMBING WORKS

EXECUTED QNT (Cumulative) SL. NO. DESCRIPTION Make Qty Units Rate Amount Amount

- SANITARY FIXTURES -

-

1 MAKE : Hindware

-

INSTALLATION

16 Nos 1,479.00 23,664.00

- -

- -

MODEL NO 1093 - -

SUPPLY 16 Nos 14,793.00 236,688.00 16 50% 8 118,344.00 - - - -

3 MAKE: JAQUAR

- -

INSTALLATION 16 Nos 197.00 3,152.00

- -

SUPPLY 16 Nos 1,381.00 22,096.00 16 50% 8 11,048.00 - -

4 MAKE: Hindware

- -

- -

INSTALLATION12 Nos 1,972.00 23,664.00

- -

- -

- -

SUPPLY 12 Nos 5,917.00 71,004.00 12 50% 6 35,502.00 - -

5 MAKE : JAQUAR

- -

- -

INSTALLATION 12 Nos 1,479.00 17,748.00 - -

SUPPLY 12 Nos 9,862.00 118,344.00 12 50% 6 59,172.00 - -

6 MAKE : Hindware

- -

- -

MODEL: TF - 0409 - -

INSTALLATION

2 Nos 1,972.00 3,944.00

Claim Qnt

% of Work Done

Certified Qnt

Collecting, installing , testing and commissioning bone color glazed European water closet ' P ' trap, with flush valve fixing materials, CI chair brackets, pan connector, pair of brass screws, solid seat and cover with hinges and fixing screws, sealant complete.

MODEL NUMBER TF - 3190 FV

COLOR BONE COLOR

FLUSH VALVE : JAQUAR

Collecting, installing testing and commissioning CP. Health faucet with flexible hose,CP Angle valve, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete.

MODEL NO : 563 and 053

Collecting, installing, testing and commissioningbone color bone color wash brook junior urinals with CP urinal spreader,CP dome grating,40mm dia heavy cast CP waste coupling, 40 mm dia CP bottle trap, CP extension pipe up to wall , wall falnges, 15 mm CP flush valve, supporting screw / brackets as per manufacturers recommendations , sealant for the joints between fixture and wall surface complete.

MODEL NO TF - 6507BD

SIZE: 350 X 230 X 600

CP FITTINGS : JAQUAR

BOTTLE TRAP - 773

WASTE COUPLING - 709

Fixing of electronic auto flush system to urinal with infrared sensor, solenoid valve , gate valve,black box and necessary wiring in conduit from solenoid valve to black box and to mains complete.

MODEL NUMBER: 51087

Collecting, installing , testing and commissioning bone color glazed rectangular wash basin with pair of C I supporting brackets duly painted with fixing screws or supporting screws as per manufacturers instructions, sealant for the joints, 1 no 15 mm CP pillar tap, CPinlet connection pipe with 1 no 15 mm C P angle valve,C P waste coupling, C P bottle trap, CP extension pipe up to wall, complete.( counter shall be supplied by other agency )

RANGE : HERITAGE

SIZE: 752X510X797MM


of 79


EXECUTED QNT (Cumulative) SL. NO. DESCRIPTION Make Qty Units Rate Amount AmountClaim

Qnt% of Work

DoneCertified

Qnt

- -

- -

BOTLE TRAP : 773 - -

- -

SUPPLY 2 Nos 17,752.00 35,504.00 2 50% 1 17,752.00 - -

7 MAKE : JAQUAR

- -

RANGE : LILY - -

INSTALLATION22 Nos 1,972.00 43,384.00

- -

- -


- -

SUPPLY 22 Nos 14,793.00 325,446.00 22 50% 11 162,723.00 - -

8

- - - -

INSTALLATIONMAKE : ESS - ESS

4 Nos 493.00 1,972.00

MODEL H- 925 - -

- - - -

SUPPLY 4 Nos 2,959.00 11,836.00 4 50% 2 5,918.00 - - - - - -

10 MAKE : DIAMOND

- -

SINGLE BOWL AND DRAIN BOARD TYPE2 Nos 1,479.00 2,958.00

- -

Bib cock : 107 - -

- -


- -

SUPPLY 2 Nos 8,383.00 16,766.00 - -

ONLY BOWL - -

SUPPLY RO Nos 5,917.00 -

INSTALLATION RO Nos 1,479.00 - - -

11

- - - -

SUPPLY 2 Nos 8,876.00 17,752.00



WASTE COUPLING: 709

CENSOR TAP MODEL NO 5104

Collecting, installing , testing and commissioning bone color glazed oval wash basin with pair of C I supporting brackets duly painted with fixing screws or supporting screws as per manufacturers instructions, sealant for the joints, 1 no 15 mm CP pillar tap, CPinlet connection pipe with 1 no 15 mm C P angle valve,C P waste coupling, C P bottle trap, CP censor tap, CP extension pipe up to wall, complete.( counter shall be supplied by other agency )

MODEL: TF - 4702 LM


WASTE COUPLING: 709

CENSOR TAP MODEL NO 51011

Collecting and placing in position C P grab bar of 600 mm long with 2 pairs of fixing screws and fixing materials complete.

RANGE : HOTELIER

Installing testing and commissioning of approved make non destructable 18 gauge highly polished stainless steel kitchen sink with required grooves comprising of pair of supporting brackets as recommended by the manufacturer, CP waste coupling, 40 mm dia CP bottle trap, CP connection pipe, 1 no sink mixer with spout, sealant to adjoining material and to the sides of sink complete. .

SIZE : 1000 MM X 500 MM

CPFITTINGS JAQAUR

WASTE COUPLING: 709

Range : Continenetal

Installing testing and commissioning of approved make garbage grinder fixed to the outlet of the sink with required length of cabling, inlet outlet complete.


of 79



Qnt% of Work

DoneCertified

Qnt

12

- - - -

MAKE : NOCHI - - - -

SUPPLY 2 Nos 17,752.00 35,504.00


13

- - - -

SIZE: 1000 MM X 550 MM X 450 MM - - - -

SUPPLY 2 Nos 10,848.00 21,696.00


TOTAL - 1,044,954.00 - -

SEWERAGE SYSTEM - - - -

1

- - - -

a) 75 mm dia 400 Rmt 321.00 128,400.00 400 75% 300 96,300.00 b) 110 mm dia 200 Rmt 345.00 69,000.00 200 75% 150 51,750.00

- -

2

- - - -

a) 40 mm dia 100 Rmt 271.00 27,100.00 100 75% 75 20,325.00 b) 50 mm dia 80 Rmt 296.00 23,680.00 80 75% 60 17,760.00

- -

3

- - a) 75 mm dia floor trap 35 Nos 690.00 24,150.00 35 75% 26.25 18,112.50 b) 'P' trap 6 Nos 740.00 4,440.00 6 75% 4.5 3,330.00

- -

4

600 Kgs 79.00 47,400.00 600 75% 450 35,550.00 - -

5

- -

Size of cut out 150 x 150 x 250 mm - -

a) 75 mm dia 5 Nos 1,972.00 9,860.00

b) 100 mm dia 20 Nos 2,959.00 59,180.00 - -

TOTAL - 393,210.00 - -

WATER SUPPLY SYSTEM - - - -

Installing testing and commissioning of approved make sullage lift pump placed in fabricated tank with required length of cabling, float switch inlet outlet complete.

Installing testing and commissioning of fabricated stainless steel tank to collect the waste water from sink with required supports , leak proof joints non destructable complete. .

Supplying , installing , testing and commissioning approved make SWR P V C double socketed pipes conforming to IS 13592 TYPE ' B ' for soil and waste drainage system including necessary fittings, fixing and jointing material all leads and lifts, P C C support at all fittings and on straight run of pipes laid below ground complete.

MAKE : PRINCE / EQUIVALENT

Supplying , installing , testing and commissioning approved make u P V C pressure pipes ( 6 kg/sqcm)conforming to IS 4985 for waste drainage system including necessary fittings, fixing and jointing material all leads and lifts complete.


Supplying , installing, testing and commissioning u PVC multi inlet floor trap conforming to IS 13592 with required P C C support placed to required level as per site condition complete.


Supplying,fabricating and placing in position M S angle supports with suspending GI thhreaded rods , nuts, bolts and washers, to clamp the pipe ( to fix the watersupply and drainage lines) in shafts, on walls, below ceiling,below soffit of beams with a coat of red oxide primer and two coats of approved colour of enamel paint including all leads and lifts, required scaffolding, complete.

Making core cutting and pressuregrouting as per manufacturer recommendation in slabs


of 79



Qnt% of Work

DoneCertified

Qnt

1

- -

FITTINGS ; UNIK - - a) 50 mm dia 130 Rmt 493.00 64,090.00 130 75% 97.5 48,067.50 b) 40 mm dia 120 Rmt 468.00 56,160.00 120 75% 90 42,120.00 c) 32 mm dia 30 Rmt 444.00 13,320.00 30 75% 22.5 9,990.00 d) 25 mm dia 285 Rmt 345.00 98,325.00 285 75% 213.75 73,743.75 e) 20 mm dia 120 Rmt 321.00 38,520.00 120 75% 90 28,890.00 f) 15 mm dia 30 Rmt 296.00 8,880.00 30 75% 22.5 6,660.00

- -

2

MAKE : ASIAN PAINT

- - a) 50 mm dia 100 Rmt 394.00 39,400.00 100 75% 75 29,550.00 b) 40 mm dia 60 Rmt 370.00 22,200.00 60 75% 45 16,650.00 c) 25 mm dia 0 Rmt 345.00 - - d) 20 mm dia 60 Rmt 321.00 19,260.00 60 75% 45 14,445.00

- - - -

3

MAKE : TAPEX

- -

a) 50 mm dia 30 Rmt 74.00 2,220.00

b) 40 mm dia 60 Rmt 49.00 2,940.00

c) 32 mm dia 30 Rmt 49.00 1,470.00 a) 25 mm dia 150 Rmt 49.00 7,350.00 b) 20 mm dia 60 Rmt 49.00 2,940.00 c) 15 mm dia 30 Rmt 49.00 1,470.00

- -

4

MAKE : AUDCO

- - a) 50mm dia 5 Nos 1,381.00 6,905.00 5 75% 3.75 5,178.75 b) 40 mm dia 20 Nos 986.00 19,720.00 20 75% 15 14,790.00 c) 25mm dia 6 Nos 690.00 4,140.00 6 75% 4.5 3,105.00 d) 20 mm dia 20 Nos 592.00 11,840.00 20 75% 15 8,880.00

- - TOTAL 421,150.00

SUMMARY

SANITARY FIXTURES 1,044,954.00

SEWERAGE SYSTEM 393,210.00

WATER SUPPLY SYSTEM 421,150.00

TOTAL 1,859,314.00 955656.5

Supplying, installing testing of approved make medium quality (Class 'B' ) G I pipe manufactured as per I S 1239 part 1 & 2 with all specials such as bends, tees unions etc., including necessary cutting, threading, welding fixing on walls, laying below ground etc.,The quoted rate shall include for chasing the walls, making bores in walls and making good the chased surfaces in cement mortar 1:3, and two coats of anticorrosive paint above the weld joint etc.

MAKE ; TATA / JINDAL

Supplying and painting the exposed G I pipes with one coat of primer and two coats of enamel paint of approved make and colour and indicating the direction of flow in different colour . (The pipe surface shall be thoroughly cleaned to remove all dirt ,grease, scale etc., before applying the primer. Quantity of pipe is included in item no1)

Supplying and painting two coats of bituminous paint for laying anticorrosive tape wrap for G I pipes buried in ground/ wall installed as per manufacturer's recommendations with 15% overlap etc., complete. ( Quantity of pipe is included in item no 1)

Supplying and fixing approved make gun metal ball valve to suit the diameter including necessary fittings, cutting and threading to pipes etc.complete

ra bill 01 -colt bangalore(1)

Documents

normal rubber gasket

abir kumar chakraborty

proposed fitout works

50x25mm aluminum stud

manyata business park

3m frosted film

alu powder coated

glazing composite