ra hydraulic semi-rotary actuators - index
TRANSCRIPT
Titan Works,Claremount Road,Boothtown, Halifax,West Yorkshire, England, HX3 6NT.
General Tel : +44 (0) 1422 398 288General Fax : +44 (0) 1422 398 287Sales Tel : +44 (0) 1422 330 265Sales Fax : +44 (0) 1422 398 289E-Mail : [email protected] : www.titangroup.co.uk
RA HYDRAULIC SEMI-ROTARY ACTUATORS - INDEX
INTRODUCTION
ORDERING CODE
RA 25-S DATA SHEET
RA 40-S DATA SHEET
RA 50-S DATA SHEET
RA 63-S DATA SHEET
RA 80-S DATA SHEET
RA 100-S DATA SHEET
FLUID POWER FORMULAE DATA
TITAN SEMI ROTARY ACTUATORS
DESIGN
Titan semi rotary actuators are designed for long life , suitable for heavy dutyapplications and available in a wide range of torque outputs.
The range comprises both single and double rack versions, the racks beinghydraulic driven against a pinion to provide a rotary output.
PERFORMANCE
Titan actuators are designed for maximum mechanical efficiency, the quoted torquefigures are 100% and take into account losses within the actuator.
The actuators will provide a constant torque output regardless of angular position,torque can be adjusted by regulating the hydraulic system pressure, speed ofoperation can be controlled by regulating the system flow rate.
POSITIONING
Titan actuators are available with standard rotations of 90°, 180°, 270° and 360°,standard variable end stops allow fine setting of each end of rotation position.
Standard position controls will allow a total of 20° angular adjustment i.e. 10° perend.
Mid rotation point is at 12 o’clock and is indicated by the position of the key wayor identified by an arrow on non keyed shafts.
CUSHIONING
Cushioning is used to decelerate rotation at the end of stroke and is effective overthe last 10 to 15 degrees of rotation ,use of end stops will reduce the availablecushioning length proportionally.
OUTPUT SHAFTS
Output shafts can be single or double sided, and can be supplied as plain keyed orsplined, all models can be supplied with keyed hollow shafts. For heavy dutyapplications, actuators can be supplied with a double shaft key.
MATERIALS
Titan actuators are manufactured in alloy steel for industrial applications,marinised and stainless steel versions are available for the offshore, food andsubsea industries.
SEALS
Actuators are fitted with nitrile seals as standard for use with mineral oil up to80°C.
Alternative seals can be supplied for higher temperatures, or to suit other types ofhydraulic fluid.
PORT POSITIONS
As standard, port positions are shown as on the data sheet, if required they can bepositioned at 90° or 180° to standard.
DOUBLE RACK VERSIONS
All TITAN actuators are available in a double rack configuration to provide twicethe torque output shown for single rack models. This configuration ensures that thepinion bearings are balanced by the racks during operation.
VALVE ACTUATORS
These variants can be supplied as spring returned or spring centred with visual orelectrical valve position indicators and manual overrides.
PAINT FINISHES
Actuators are supplied finished in enamel paint, they can be supplied in primeronly or to marine specification as required.
POSITIONAL CONTROL
Positional control can be supplied by end of stroke limit switches, proximityswitches or rotary potentiometer for full range resolution.
SPECIAL UNITS
All actuators can be modified for special requirements, units are available todirectly interchange with existing equipment and custom designed models can besupplied if required.
EXAMPLE RA 63 90 20S 2
ORDERING CODE
MODEL TYPE
TOTAL ROTATION REQUIRED
SINGLE RACK
DOUBLE RACK
SHAFT TYPE
HOLLOW KEYED SHAFT
SINGLE END KEYED SHAFT
DOUBLE END KEYED SHAFT
SINGLE END SPLINED SHAFT
DOUBLE END SPLINED SHAFT
SPECIAL SHAFT
1
2
3
4
5
6
S
D
OPTIONS
20
21
22
23
24
CUSHIONING
MARINISED FINISH
STAINLESS STEEL
VITON SEALS
POSITIONAL CONTROL
WORKING PRESSURE (BAR)ANGULAR POSn.
90°
180°
270°
360°
DISPLACEMENT (CC)
11
22
33
44
70
140
OUTPUT TORQUE (NM)
38
75
90° 180° 270° 360°
A
166 210 232
MAXIMUM WORKING PRESSURE : 210 BAR
KEYWAY DETAIL
65 44
4
35 2.5
20
54.9054.95
DIA
A
80
56 CRS
66 CRS
12
90
4-HOLES M8 X 12 DP.2-PORTS 1/8" BSP
5.966.00
18.9919.01
DIA
3.73.5
198
WORKING PRESSURE (BAR)ANGULAR POSn.
90°
180°
270°
360°
DISPLACEMENT (CC)
70
210
140
OUTPUT TORQUE (NM)
90° 180° 270° 360°
A
MAXIMUM WORKING PRESSURE : 210 BAR
100
90 48
13.513.5
160100 DIA
31.7031.72
DIA140 CRS
70 CRS
70 60 CRS
42.5
27.127.2
42 2
4-HOLES M10 THRO.
14
54
50 DIA.
OPTIONAL HOLLOW SHAFT
2-PORTS 3/8" BSP
A
8
800
831
277
554
225
300
75
150 540420 680
fluid power Ltd
WORKING PRESSURE (BAR)ANGULAR POSn.
90°
180°
270°
360°
DISPLACEMENT (CC)
70
210
140
OUTPUT TORQUE (NM)
90° 180° 270° 360°
A
MAXIMUM WORKING PRESSURE : 210 BAR
A
150
140 80
1515
150 DIA215
470
38.0238.00
DIA185 CRS
10
75 CRS90
68 CRS
125 CRS 4-HOLES M12 X 25 DP.EACH SIDE.
2-PORTS 1/2" BSP
33.032.8
OPTIONAL HOLLOW SHAFT
16
55
50 DIA.
172
345
517
690
641
640 845 9901282
1923
1250
fluid power Ltd
WORKING PRESSURE (BAR)ANGULAR POSn.
90°
180°
270°
360°
DISPLACEMENT (CC)
70
210
140
OUTPUT TORQUE (NM)
180° 270° 360°
A
MAXIMUM WORKING PRESSURE : 210 BAR
90°
A
150
125 CRS
200 CRS
2-PORTS 1/2" BSP
4-HOLES M16 X 30 DP.EACH SIDE.
90 75 CRS
41.8241.87
74 CRS
140
1515
150 DIA
230
50.7250.78
DIA
75 4
85
74
70 DIA.
15.88
OPTIONAL HOLLOW SHAFT
274
548
822
1096
2040
3060
1020
635 795 962 1138
18
WORKING PRESSURE (BAR)ANGULAR POSn.
90°
180°
270°
360°
DISPLACEMENT (CC)
70
210
140
OUTPUT TORQUE (NM)
180° 270° 360°
A
MAXIMUM WORKING PRESSURE : 210 BAR
90°513
2052
1905
3810 692 890 128210861026
1539
A
200
220 116
20 20
186 DIA240
6102
160 CRS
76.1276.17
DIA
80 CRS65.265.4
95
84 CRS
2-PORTS 1/2" BSP
19.05
82.5
20 4-HOLES M20 X 30 DP.EACH SIDE.
200 CRS
75 DIA.
OPTIONAL HOLLOW SHAFT
5715
WORKING PRESSURE (BAR)ANGULAR POSn.
90°
180°
270°
360°
DISPLACEMENT (CC)
70
210
140
OUTPUT TORQUE (NM)
180° 270° 360°
A
MAXIMUM WORKING PRESSURE : 210 BAR
90°
fluid power Ltd
238 125
1111
250200 DIA
102 6
82.5
20
75 DIA.
OPTIONAL HOLLOW SHAFT
2-PORTS 3/4" BSP
200 CRS
190 CRS
65.265.4
4-HOLES M24 X 35 DP.EACH SIDE.
80 CRS
962
1924
2886
3848
3572
7144
10716
1002
19.05
811 1230 1446
76.1276.17
DIA
A
250
105
80 CRS