rack mount ac voltage stabilizers & regulators - single phase 3 to 15 kva - ashley edison ses-r...

SES-R

H & HL - SINGLE PHASE

SERVO ELECTRONIC DESIGN

AC VOLTAGE STABILISERS & REGULATORS

RACK MOUNTABLE AC SINGLE PHASE - 3 TO 15 kVA

ENSURING A STABLE AC MAINS VOLTAGE

AC mains voltage fluctuations can cause equipment to behave erratically and malfunction. Some

systems may even break down due to these fluctuations, noise or spikes. Failure to ensure the

incoming mains voltage is stable and clean can often result in costly equipment repairs and

unplanned down-time.

SES-H/HL-R-JANUARY-2013 www.AshleyEdison.com

SES H/HL-R SERIES - SINGLE PHASE - 3 to 15 kVA

GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS

COST EFFICIENT VOLTAGE STABILISATION

specifically designed for ease of

installation within a 19” rack

environment.

FEATURES

Automatic Voltage Regulation

Step less automated voltage regulation - ideal for 95%

of all applications.

Wide Range of Power Ratings

Single Phase 3 to 15 KVA

Broad Input Voltage Swing Ranges

Input Swing - ±15% (S15), ±20% (S20), ± 25%

(S25), ±30% (S30), ±35% (S35) & ±40% (S40) - to

specify.

Precise Output Voltage Regulation

Output Voltage Accuracy ± 1.%

Transient Voltage Surge Suppression

TVSS - Protects loads against harmful high-energy

surges, transients and spikes.

High Efficiency

Better than 98% for low running costs.

Inbuilt High Overload Capability

Ideal for loads with an inherent initial high current

Input Circuit Breaker

Standard protection on all models

Bypass Control Switch

Manual Electronic Controls Bypass Facility

Soft - Switch On

Load protection on Start Up

Over / Low Voltage Protection Ability to automatically shutdown the Voltage

Stabiliser in the event of the input supply voltage

going outside the input voltage window.

Compliance with International Standards

Designed, manufactured and supplied to comply with

leading international standards

CE Conformity

Fully compliant and labelled

Warranty

3 Years / 36 Months as standard

Available Standard Models:

H Series - High Voltage Models

220V, 230V or 240V (Single Phase)

L Series - Low Voltage Models

100V, 110V, 115V, 120V or 127V (Single Phase)

HL & LH Series

Step-Down & Step-Up Voltage Models (Single Phase)

Ashley-Edison AC Voltage Stabilizers offer -

Voltage Stability & Protection

Suitable for all electrical and electronic equipment, Ashley-Edison’s SES AC Voltage Stabilisers

continuously monitor the incoming supply. Should the incoming voltage rise or drop, the Stabilisers

will automatically control the output to ensure the voltage reaching the load equipment always remains

constant at the requisite voltage. Inbuilt spike protection ensures the load is continuously protected

against harmful utility supply born high energy spikes and surges.

Durability & Dependability

With an impressively wide range of input voltage window options and precise output voltage

regulation, the electro-mechanical / electronic servo design based SES Voltage Stabilisers have

repeatedly proven their durability and dependability in some of the world’s harshest and most

demanding power environments.

Energy Efficiency

Characterised by high efficiency, SES Stabilisers are completely unaffected by power factor and load

variations. Able to withstand high instantaneous overloads, SES Stabilisers do not generate any

magnetic interference - making them ideal for being located near to sensitive equipment. Through

delivering a regulated, stable and optimised voltage to the equipment they support, SES Stabilisers

ensure you only pay for the actual energy you need.

Unparalleled Protection and Value

Unparalleled inbuilt protection features, including the provision of Soft Switch-On as standard on all

models, ensures SES AC Voltage Stabilisers deliver, without compromising on technical performance

or quality, outstanding value for money.

220V - 230V - 240V - 50/60Hz

TYPICAL APPLICATIONS

VOLTAGE CHOICES AVAILABLE

2 WIRE SOLUTIONS SINGLE PHASE WITH NEUTRAL (+ GROUND)

H/HL SERIES 3 to 15 kVA (H)

3 to 5 kVA (HL)

High Voltage Models:

220V, 230V or 240V.

Other voltages available on individual request / quotation.

L/LH SERIES 3 to 10 kVA

3 to 5 kVA (LH)

Low Voltage Models:

100V, 110V, 115V, 120V or 127V.


Output

Voltage

In situations where there is a reasonably good mains supply, a Stabiliser

offering an input variation swing of ±15% (S15 Models) will usually be more

than acceptable, but in more remote locations, or countries where the

national supply infrastructure is less developed, variations of ±20% or greater

may be needed to be accommodated by the Stabiliser.

Please Note – These Stabilisers are not designed to support / protect voltage

“back feed” applications, where energy is required to be also fed back into

the utility supply.

H & HL SERIES INPUT VOLTAGE WINDOW OPTIONS

Input

Voltage

± 1%

SES-H-S*-R Ashley-Edison

Voltage Stabiliser

SES H/HL-R SERIES - SINGLE PHASE - 3 to 15 kVA


SES-H/HL-R-JANUARY-2013 www.AshleyEdison.com

H & HL SERIES - SES-H/HL-S*-R Input Voltage Windows & Output Accuracy

Nominal Single Phase

Voltage

Output Voltage

Accuracy

± % of Nominal

INPUT VOLTAGE SWINGS / SWING MODEL NO VARIANTS

S15 S20 S25 S30 S35 S40

H - 3 to 15 kVA H - 3 to 15 kVA H - 3 to 10 kVA H - 3 to 7.5 kVA H - 3 to 7.5 kVA H - 3 to 5 kVA

HL - 3 to 5 kVA HL - 3 to 5 kVA HL - 3 to 5 kVA

220V

± 1% 187v to 253v (± 15%)

176v to 264v (± 20%)

165v to 275v (± 25%)

154v to 286v (± 30%)

143v to 297v (± 35%)

132v to 308v (± 40%)

± 3% 183v to 260v (-17% / +18%)

172v to 271v (-22% / +23%)

161v to 282v (-27% / +28%)

150v to 293v (-32% / +33%)

139v to 304v (-37% / +38%)

128v to 315v (-42% / +43%)

± 5% 178v to 266v (-19% / +21%)

167v to 277v (-24% / +26%)

156v to 288v (-29% / +31%)

145v to 299v (-34% / +36%)

134v to 310v (-39% / +41%)

123v to 321v (-44% / +46%)

230V

± 1% 196v to 264v (± 15%)

184v to 276v (± 20%)

173v to 287v (± 25%)

161v to 299v (± 30%)

150v to 310v (± 35%)

138v to 322v (± 40%)

± 3% 191v to 271v (-17% / +18%)

179v to 283v (-22% / +23%)

168v to 294v (-27% / +28%)

156v to 306v (-32% / +33%)

145v to 317v (-37% / +38%)

133v to 329v (-42% / +43%)

± 5% 186v to 278v (-19% / +21%)

175v to 290v (-24% / +26%)

163v to 302v (-29% / +31%)

152v to 313v (-34% / +36%)

140v to 324v (-39% / +41%)

129v to 336v (-44% / +46%)

240V

± 1% 204v to 276v (± 15%)

192v to 288v (± 20%)

180v to 300v (± 25%)

168v to 312v (± 30%)

156v to 324v (± 35%)

144v to 336v (± 40%)

± 3% 199v to 283v (-17% / +18%)

187v to 295v (-22% / +23%)

175v to 307v (-27% / +28%)

163v to 319v (-32% / +33%)

151v to 331v (-37% / +38%)

139v to 343v (-42% / +43%)

± 5% 194v to 290v (-19% / +21%)

182v to 302v (-24% / +26%)

170v to 314v (-29% / +31%)

158v to 326v (-34% / +36%)

146v to 338v (-39% / +41%)

134v to 350v (-44% / +46%)

Security Systems

Audio/Video Systems

Testing Equipment

Communication Systems

TV/Radio Broadcasting Stations

Computers & Network Systems

Medical Equipment

Electronic Equipment

H SERIES TECHNICAL SPECIFICATION

Model Rating

kVA

Max Rating (Amps) Dimensions (mm)

W x H x D

Weight

(Kg) @ 220V @ 230V @ 240V

S15 - Single Phase Input Swing ± 15%

SES-3H-S15-R 3 13.6 13 12.5 480 x 240 x 400 28

SES-5H-S15-R 5 23 22 21 480 x 240 x 400 30

SES-10H-S15-R 10 45 44 42 480 x 240 x 400 36

SES-15H-S15-R 15 68 65 63 480 x 240 x 400 53


SES-3H-S20-R 3 13.6 13 12.5 480 x 240 x 400 30

SES-5H-S20-R 5 23 22 21 480 x 240 x 400 36

SES-10H-S20-R 10 45 44 42 480 x 240 x 400 45

SES-15H-S20-R 15 68 65 63 480 x 240 x 400 60


SES-3H-S25-R 3 13.6 13 12.5 480 x 240 x 400 34

SES-5H-S25-R 5 23 22 21 480 x 240 x 400 36

SES-10H-S20-R 10 45 44 42 480 x 240 x 400 48

H SERIES PRODUCT SELECTION TABLE

Copyright 2013 © Ashley-Edison (UK) reserve the right to change any or all the specifications indicated or implied without prior notice. E&EO.

Technology: Servo Electronic - Variable Transformer controlled, series regulation transformer (buck-boast transformer with secondary wired in series with the load).

Input Voltage Swing:

Output Voltage: Presettable for any voltage between 220V, 230V, 240V, (Customer to specify), Single Phase, 2 Wire. 254V & 277V models available to special order.

The permissible input voltage swing is relative to the preset output voltage.

Output Voltage Accuracy: ± 1%, ± 3% or ± 5 % - auto selection based

on input voltage swing.

Frequency: 47 - 65Hz

Response Time: <1.5ms

Correction Time: A 10% supply variation will be corrected to

within 2.5% in 0.6 seconds.

Efficiency: 98%

Power Factor: Any lagging to 0.95 leading

Surge Ratings: 10 x max. current rating for 2 seconds 3 x max. current rating for 1 minute 2 x max. current rating for 2 minutes

Surge Suppression: TVSS - Protects loads against high-energy Spikes and Transient Voltages.

Soft-Switch On: Ensures the output voltage is set at minimum upon Switch-On before commencing stabilization - protects load equipment from damaging start up voltage surges.

Environment: Temperature range –15 to 45 °C. Derate by 2% for each additional °C Up to max 60 °C . Suitable for indoor tropical use 95% RH (non-condensing). Maximum altitude 1000m. Derate by 2.5% for each additional 500m.

Construction: Enclosures to IP20 (NEMA 1 Style) - BS EN 60529.

Paint Colour: RAL 7032 (Grey - Epoxy Powder Coating)

EMC Conformance: Complies with BS EN 55022 and the relevant parts of the BS EN 61000 series of standards.

CE Conformity: CE Marked - being fully compliant with European Union Directives 2004/108/EC (The EMC Directive) and 2006/95/EC (The Low Volt-age Directive).

Standard Warranty: Three Years / 36 Months from date of supply

Standard Features:

Input Circuit Breaker Input / Output Terminals Bypass Control Switch Output Voltmeter Over / Low Voltage Protection Volt Free Contacts - (Normally Open / Closed)

Optional Accessories: Lightning Surge Arrestor AquaStop Protective Coating - protection against damp and moisture ingress

SES H-S*-R SERIES - SINGLE PHASE - 3 to 15 kVA


SES-H-S*-R - JANUARY 2013 www.AshleyEdison.com

Note: Special voltage configurations available to individual order.

Model / Accuracy

± 1% ± 3% ± 5%

S15 ± 15% -17% +18% -19% +21%

S20 ± 20% -22% +23% -24% +26%

S25 ± 25% -27% +28% -29% +31%

S30 ± 30% -32% +33% -34% +36%

S35 ± 35% -32% +33% -34% +36%

S40 ± 40% -42% +43% -44% +46%

Single Phase, 2 Wire ( 1 Phase + Neutral + G/E).

Other swing options available to special quotation / order.

Model Rating

kVA


W x H x D

Weight

(Kg) @ 220V @ 230V @ 240V


SES-3H-S30-R 3 13.6 13 12.5 480 x 240 x 400 37

SES-5H-S30-R 5 23 22 21 480 x 240 x 400 40

SES-7.5H-S30-R 10 36 35 33 480 x 240 x 400 48


SES-3H-S35-R 3 13.6 13 12.5 480 x 240 x 400 41

SES-5H-S35-R 5 23 22 21 480 x 240 x 400 48

SES-7.5H-S30-R 10 36 35 33 480 x 240 x 400 50


SES-3H-S40-R 3 13.6 13 12.5 480 x 240 x 400 44

SES-5H-S40-R 5 23 22 21 480 x 240 x 400 50

Rack Mount Enclosure

Height = 5.4U

220V - 230V - 240V - 50/60Hz

STEP–DOWN AC VOLTAGE STABILISERS

HL SERIES TECHNICAL SPECIFICATION

Model Rating

kVA


W x H x D

Weight

(Kg) @ 100V @ 110V @ 115V @127V @120V


SES-3HL-S15-R 3 30 27 26 480 x 240 x 400 46 23 25

SES-5HL-S15-R 5 50 46 43 480 x 240 x 400 56 39 42


SES-3HL-S20-R 3 30 27 26 480 x 240 x 400 48 23 25

SES-5HL-S20-R 5 50 46 43 480 x 240 x 400 62 39 42


SES-3HL-S25-R 3 30 27 26 480 x 240 x 400 52 23 25

SES-5HL-S25-R 5 50 46 43 480 x 240 x 400 62 39 42

HL SERIES PRODUCT SELECTION TABLE



Input Voltage: 220V, 230V or 240V AC (Customer to specify), Single Phase, 2 Wire.


Output Voltage: Presettable for any voltage between 100V, 110V, 115V & 120V (Customer to specify), Single Phase, 2 Wire.

127V models available to special order.







Efficiency: 98%











Standard Features:



SES HL-S*-R SERIES - SINGLE PHASE - 3 to 5 kVA


SES-HL-S*-R - JANUARY 2013 www.AshleyEdison.com


Model / Accuracy ± 1% ± 3% ± 5%

S15 ± 15% -17% +18% -19% +21%

S20 ± 20% -22% +23% -24% +26%

S25 ± 25% -27% +28% -29% +31%


Height = 5.4U

Ideal for applications where the utility supply voltage is different from the load equipment’s requirement.

220V - 230V - 240V - 50/60Hz

SES-R

L & LH - SINGLE PHASE

SERVO ELECTRONIC DESIGN

AC VOLTAGE STABILIZERS & REGULATORS

RACK MOUNTABLE AC SINGLE PHASE - 3 TO 10 kVA

ENSURING A STABLE AC UTILITY SUPPLY VOLTAGE

AC mains voltage fluctuations can cause equipment to behave erratically and malfunction. Some

systems may even break down due to these fluctuations, noise or spikes. Failure to ensure the

incoming mains voltage is stable and clean can often result in costly equipment repairs and

unscheduled down-time.

SES-L/LH-R-JANUARY-2013 www.AshleyEdison.com

SES L/LH-R SERIES - SINGLE PHASE - 3 to 10 kVA


COST EFFICIENT VOLTAGE STABILIZATION

specifically designed for ease of

installation within a 19” rack

environment.

FEATURES

Automatic Voltage Regulation

Step less automated voltage regulation - ideal for 95%

of all applications.

Wide Range of Power Ratings

Single Phase 3 to 10 KVA

Broad Input Voltage Swing Ranges

Input Swing - ±15% (S15), ±20% (S20), ± 25%

(S25), ±30% (S30) & ±35% (S35) - to specify.

Precise Output Voltage Regulation

Output Voltage Accuracy ± 1.%

Transient Voltage Surge Suppression

TVSS - Protects loads against harmful high-energy

surges, transients and spikes.

High Efficiency

Better than 98% for low running costs.

Inbuilt High Overload Capability

Ideal for loads with an inherent initial high current

Input Circuit Breaker

Standard protection on all models

Bypass Control Switch

Manual Electronic Controls Bypass Facility

Soft - Switch On

Load protection on Start Up

Over / Low Voltage Protection Ability to automatically shutdown the Voltage

Stabiliser in the event of the input supply voltage

going outside the input voltage window.

Compliance with International Standards

Designed, manufactured and supplied to comply with

leading international standards

CE Conformity

Fully compliant and labelled

Warranty

3 Years / 36 Months as standard

Available Standard Models:

L Series - Low Voltage Models

100V, 110V, 115V, 120V or 127V (Single Phase)

H Series - High Voltage Models

220V, 230V or 240V (Single Phase)

LH & HL Series

Step-Up & Step-Down Voltage Models (Single Phase)

Ashley-Edison AC Voltage Stabilizers offer -

Voltage Stability & Protection

Suitable for all electrical and electronic equipment, Ashley-Edison’s SES AC Voltage Stabilizers

continuously monitor the incoming supply. Should the incoming voltage rise or drop, the Stabilizers

will automatically control the output to ensure the voltage reaching the load equipment always remains

constant at the requisite voltage. Inbuilt spike protection ensures the load is continuously protected

against harmful utility supply born high energy spikes and surges.

Durability & Dependability

With an impressively wide range of input voltage window options and precise output voltage

regulation, the electro-mechanical / electronic servo design based SES Voltage Stabilizers have

repeatedly proven their durability and dependability in some of the world’s harshest and most

demanding power environments.

Energy Efficiency

Characterized by high efficiency, SES Stabilizers are completely unaffected by power factor and load

variations. Able to withstand high instantaneous overloads, SES Stabilizers do not generate any

magnetic interference - making them ideal for being located near to sensitive equipment. Through

delivering a regulated, stable and optimized voltage to the equipment they support, SES Stabilizers

ensure you only pay for the actual energy you need.

Unparalleled Protection and Value

Unparalleled inbuilt protection features, including the provision of Soft Switch-On as standard on all

models, ensures SES AC Voltage Stabilizers deliver, without compromising on technical performance

or quality, outstanding value for money.

100V - 110V - 115V - 120V - 127V - 50/60Hz

VOLTAGE CHOICES AVAILABLE

2 WIRE SOLUTIONS SINGLE PHASE WITH NEUTRAL (+ GROUND)

L/LH SERIES 3 to 10 kVA

3 to 5 kVA (LH)

Low Voltage Models:

100V, 110V, 115V, 120V or 127V.

Other voltages available on individual request / quotation

H/HL SERIES 3 to 15 kVA (H)

3 to 5 kVA (HL)

High Voltage Models:

220V, 230V or 240V.


Output

Voltage

In situations where there is a reasonably good mains supply, a Stabilizer

offering an input variation swing of ±15% (S15 Models) will usually be more

than acceptable, but in more remote locations, or countries where the

national supply infrastructure is less developed, variations of ±20% or greater

may be needed to be accommodated by the Stabilizer.

Please Note – These Stabilizers are not designed to support / protect voltage

“back feed” applications, where energy is required to be also fed back into

the utility supply.

L & LH SERIES INPUT VOLTAGE WINDOW OPTIONS

Input

Voltage

± 1%

SES-L-S*-R Ashley-Edison

Voltage Stabilizer

SES L/LH-R SERIES - SINGLE PHASE - 3 to 10 kVA


SES-L/LH-R-JANUARY-2013 www.AshleyEdison.com

L & LH SERIES - SES-L/LH-S*-R Input Voltage Windows & Output Accuracy

Nominal Single

Phase Voltage

Output Voltage

Accuracy

± % of Nominal

INPUT VOLTAGE SWINGS / SWING MODEL NO VARIANTS

S15 S20 S25 S30 S35

L - 3 to 10 kVA L - 3 to 10 kVA L - 3 to 10 kVA L - 3 to 7.5 kVA L - 3 to 7.5 kVA

LH - 3 to 5 kVA LH - 3 to 5 kVA LH - 3 to 5 kVA

100V

± 1% 85v to 115v (± 15%)

80v to 120v (± 20%)

75v to 125v (± 25%)

70v to 130v (± 30%)

65v to 135v (± 35%)

± 3% 83v to 118v (-17% / +18%)

78v to 123v (-22% / +23%)

73v to 128v (-27% / +28%)

68v to 133v (-32% / +33%)

63v to 138v (-37% / +38%)

± 5% 81v to 121v (-19% / +21%)

76v to 126v (-24% / +26%)

71v to 131v (-29% / +31%)

66v to 136v (-34% / +36%)

61v to 141v (-39% / +41%)

110V

± 1% 94v to 127v (± 15%)

88v to 132v (± 20%)

83v to 138v (± 25%)

77v to 143v (± 30%)

72v to 149v (± 35%)

± 3% 91v to 130v (-17% / +18%)

86v to 135v (-22% / +23%)

80v to 141v (-27% / +28%)

75v to 146v (-32% / +33%)

69v to 152v (-37% / +38%)

± 5% 89v to 133v (-19% / +21%)

84v to 139v (-24% / +26%)

78v to 144v (-29% / +31%)

73v to 150v (-34% / +36%)

67v to 155v (-39% / +41%)

115V

± 1% 98v to 132v (± 15%)

92v to 138v (± 20%)

86v to 144v (± 25%)

81v to 150v (± 30%)

75v to 155v (± 35%)

± 3% 95v to 136v (-17% / +18%)

90v to 141v (-22% / +23%)

84v to 147v (-27% / +28%)

78v to 153v (-32% / +33%)

72v to 159v (-37% / +38%)

± 5% 93v to 139v (-19% / +21%)

87v to 145v (-24% / +26%)

82v to 151v (-29% / +31%)

76v to 156v (-34% / +36%)

70v to 162v (-39% / +41%)

120V

± 1% 102v to 138v (± 15%)

96v to 144v (± 20%)

90v to 150v (± 25%)

84v to 156v (± 30%)

78v to 162v (± 35%)

± 3% 100v to 142v (-17% / +18%)

94v to 148v (-22% / +23%)

88v to 154v (-27% / +28%)

82v to 160v (-32% / +33%)

76v to 166v (-37% / +38%)

± 5% 97v to 145v (-19% / +21%)

91v to 151v (-24% / +26%)

85v to 157v (-29% / +31%)

79v to 163v (-34% / +36%)

73v to 169v (-39% / +41%)

127V

± 1% 108v to 146v (± 15%)

102v to 152v (± 20%)

95v to 159v (± 25%)

89v to 165v (± 30%)

83v to 171v (± 35%)

± 3% 105v to 150v (-17% / +18%)

99v to 156v (-22% / +23%)

93v to 163v (-27% / +28%)

86v to 169v (-32% / +33%)

80v to 175v (-37% / +38%)

± 5% 103v to 154v (-19% / +21%)

97v to 160v (-24% / +26%)

90v to 166v (-29% / +31%)

84v to 173v (-34% / +36%)

77v to 179v (-39% / +41%)

L SERIES TECHNICAL SPECIFICATION

Model Rating

kVA


W x H x D

Weight

(Kg) @ 100V @ 110V @ 127V @ 115V @ 120V


SES-3L-S15-R 3 30 27 23 480 x 240 x 400 28 26 25

SES-5L-S15-R 5 50 45 39 480 x 240 x 400 30 43 41

SES-10L-S15-R 10 100 90 78 480 x 240 x 400 36 87 83


SES-3L-S20-R 3 30 27 23 480 x 240 x 400 30 26 25

SES-5L-S20-R 5 50 45 39 480 x 240 x 400 36 43 41

SES-10L-S20-R 10 100 90 78 480 x 240 x 400 45 87 83


SES-3L-S25-R 3 30 27 23 480 x 240 x 400 34 26 25

SES-5L-S25-R 5 50 45 39 480 x 240 x 400 36 43 41

SES-10L-S20-R 10 100 90 78 480 x 240 x 400 48 87 83


SES-3L-S30-R 3 30 27 23 480 x 240 x 400 37 26 25

SES-5L-S30-R 5 50 45 39 480 x 240 x 400 40 43 41

SES-7.5L-S30-R 7.5 75 68 59 480 x 240 x 400 48 65 62


SES-3L-S35-R 3 30 27 23 480 x 240 x 400 41 26 25

SES-5L-S35-R 5 50 45 39 480 x 240 x 400 48 43 41

SES-7.5L-S30-R 7.5 75 68 59 480 x 240 x 400 50 65 62

L SERIES PRODUCT SELECTION TABLE




Output Voltage: Presettable for any voltage between 100V, 110V, 115V or 120V, (Customer to specify), Single Phase, 2 Wire. 127V models available to special order.

The permissible input voltage swing is relative to the preset output voltage.







Efficiency: 98%











Standard Features:



SES L-S*-R SERIES - SINGLE PHASE - 3 to 10 kVA


SES-L-S*-R - JANUARY 2013 www.AshleyEdison.com


Model / Accuracy

± 1% ± 3% ± 5%

S15 ± 15% -17% +18% -19% +21%

S20 ± 20% -22% +23% -24% +26%

S25 ± 25% -27% +28% -29% +31%

S30 ± 30% -32% +33% -34% +36%

S35 ± 35% -32% +33% -34% +36%

Single Phase, 2 Wire ( 1 Phase + Neutral + G/E).

Other swing options available to special quotation / order.


Height = 5.4U

100V - 110V - 115V - 120V - 127V - 50/60Hz

STEP–UP AC VOLTAGE STABILISERS

LH SERIES TECHNICAL SPECIFICATION

Model Rating

kVA


W x H x D

Weight

(Kg) @ 220V @ 230V @240V


SES-3LH-S15-R 3 13.6 13 12.5 480 x 240 x 400 46

SES-5LH-S15-R 5 23 22 21 480 x 240 x 400 56


SES-3LH-S20-R 3 13.6 13 12.5 480 x 240 x 400 48

SES-5LH-S20-R 5 23 22 21 480 x 240 x 400 62


SES-3LH-S25-R 3 13.6 13 12.5 480 x 240 x 400 52

SES-5LH-S25-R 5 23 22 21 480 x 240 x 400 62

HL SERIES PRODUCT SELECTION TABLE



Input Voltage: 100V, 110V, 115V & 120V (Customer to specify), Single Phase, 2 Wire ( 1 Phase + Neutral + G/E). 127V models available to special order.


Output Voltage: Presettable for any voltage between 220V, 230V & 240V (Customer to specify), Single Phase, 2 Wire.







Efficiency: 98%











Standard Features:



SES LH-S*-R SERIES - SINGLE PHASE - 3 to 5 kVA


SES-LH-S*-R - JANUARY 2013 www.AshleyEdison.com


Model / Accuracy ± 1% ± 3% ± 5%

S15 ± 15% -17% +18% -19% +21%

S20 ± 20% -22% +23% -24% +26%

S25 ± 25% -27% +28% -29% +31%


Height = 5.4U

Ideal for applications where the utility supply voltage is different from the load equipment’s requirement.

100V - 110V - 115V - 120V - 127V - 50/60Hz

rack mount ac voltage stabilizers & regulators - single phase 3 to 15 kva - ashley edison ses-r...

Documents