radio receivers tecnology

104 105

69

11,529

73

10

3745

14

70

1336

Accessories

250TAUPROG Programmer for TAU rolling code transmitters

250ANTD1 Aerial with mounting bracket and 5 m cable

200 BATTBUG Batteries for T-4, k-SLIM and BUG2-4 transmitters

250ANTD Aerial with 5 m cable (to be mounted on LAMP flashing lights)

Radio receivers

250RXDC1 Self-learning, single-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.

250RXDC4 Self-learning, four-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.

250RXDC2 Self-learning, two-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.

250RXDC4T 230 V Self-learning, four-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.

250RXDC1B Self-learning, single-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.

250E1RXD 126-code memory extension for RXDC self-learning radio receivers

250RXDC2B Self-learning, two-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.



250T-RADIO1Universal system made of one 433,92 MHz single-channel and self-learning receiver with built-in aerial and a two-channel k-SLIM transmitter with rolling code technology

250T-RADIO2Universal system made of one 433,92 MHz two-channel and self-learning receiver with built-in aerial and two four-channel T-4RP transmitters with rolling code technology

TRANSMITTERS AND

RADIO RECEIVERS

250K-SLIMRPTwo-channel transmitter, rolling code technology, 433,92 MHz

250BUG2RTwo-channel transmitter, rolling code technology, 433,92 MHz

250T-4RPFour-channel transmitter, rolling code technology, 433,92 MHz, com-plete with support

250BUG4RFour-channel transmitter, rolling code technology, 433,92 MHz

Features: • frequency: 433,92 MHz• range: up to 200 m in open air (the effective ran-ge depends on terrain and possible radio frequen-cy interferences)• 281.000 billion code combinations• rolling code technology: every time the transmit-ter sends a code, it generates a new code using an encoder. An algorithm identifies and validates only the signal of the transmitters encoded by the radio receiver.

Pros: • virtually impossible to duplicate• code can be personalized thanks to the TAU-PROG programmer• ideal for multi-user systems• a transmitter can be programmed into any num-ber of self-learning radio receivers, thus avoiding the use of different transmitters• tougher shells

Thanks to the TAUPROG handheld programmer and the new TAUPROG management software it is possi-ble to create and manage an access control databa-se, with a wide range of new functions. Rolling code transmitters can’t be duplicated or added an existing system unless enabled by the same TAUPROG han-dheld programmer, thanks to the unique code em-bedded in each TAUPROG encoder. The user-friendly TAUPROG database management software (PC ver-sion) stores database contents and allows multiple functions such as customize and add comments to every transmitter stored, add/remove new transmit-ters to an existing system, enable/disable codes, make back-up copies and prints.

NEW FUNCTIONS

ROLLING CODET E C N O L O G Y

106 107

69

11,529

73

10

3745

14

70

1336

85 18

51

250TXD2Two-channel transmitter, dipswitch tech-nology, 433,92 MHz

250TXD4Four-channel transmitter, dipswitch tech-nology, 433,92 MHz

Accessories

200 BATTTX Batteries for TXD2 and TXD4 transmitters




Radio receivers

250RXTS1 Dipswitch technology, single-channel, 433,92 MHz plug-in radio receiver.

250RXTS2 Dipswitch technology, two-channel, 433,92 MHz plug-in radio receiver.

250RXTS1B Dipswitch technology, single-channel, 433,92 MHz radio receiver with enclosure

250RXTS2B Dipswitch technology, two-channel, 433,92 MHz radio receiver with enclosure

250K-SLIMTwo-channel transmitter, dipswitch technology, 433,92 MHz

250BUG2Two-channel transmitter, dipswitch technology, 433,92 MHz

250T-4Four-channel transmitter, dipswitch technology, 433,92 MHz, complete with support

250BUG4Four-channel transmitter, dipswitch tech-nology, 433,92 MHz

Features: • frequency: 433,92 MHz• range: up to 200 m in open air (the effective ran-ge depends on terrain and possible radio frequen-cy interferences)• 1024 code combinations• dipswitch technology

Pros: • easy programming• code can be easily changed by setting the switches inside the transmitter• dipswitch transmitters can be programmed both in dipswitch and self-learning radio receivers• a transmitter can be programmed into any num-ber of self-learning radio receivers, thus avoiding the use of different transmitters• tougher shells

TRANSMITTERS AND

RADIO RECEIVERS DIP-SWITCH

T E C N O L O G Y

108 109

69

11,529

73

10

3745

14

Accessories




Radio receivers

250RXDC1 Self-learning, single-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.

250RXDC4 Self-learning, four-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.

250RXDC2 Self-learning, two-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.

250RXDC4T 230 V Self-learning, four-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.

250RXDC1B Self-learning, single-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.


250RXDC2B Self-learning, two-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.


Features: • frequency: 433,92 MHz• range: up to 200 m in open air (the effective ran-ge depends on terrain and possible radio frequen-cy interferences)• 1024 code combinations• self-learning technology

Pros: • quick and easy programming, without opening the transmitter’s shell• code can be easily changed by setting the switches inside the transmitter• dipswitch transmitters can be programmed both in dipswitch and self-learning radio receivers• ideal for multi-user systems• a transmitter can be programmed into any num-ber of self-learning radio receivers, thus avoiding the use of different transmitters• tougher shells

250K-SLIMCTwo-channel transmitter, self-lear-ning technology, 433,92 MHz

250T-4CFour-channel transmitter, self-lear-ning technology, 433,92 MHz, com-plete with support


TRANSMITTERS AND

RADIO RECEIVERS SELF LEARNING

T E C N O L O G Y

110 111

Features: • synchronized infrared beams• maximum range 20 m• adjustable up to 180° (FOTEC / FOTS) • 12 / 24 V power input

Pros: • compact design• design suits any architectural style• 180° adjustable photocells are very useful when beams can’t be perfectly aligned

900FOTISet of infrared safety photocells, 12 / 24 V, flush mount, beam alignment adjustable up to 15°, up to 20 m range

900FOTECSet of infrared safety photocells, 12 / 24 V, surface mount, adjustable up to 180°, up to 10 m range

900FOTSSet of infrared safety photocells with wire-less transmitter, surface mount, adjustable up to 180°, up to 10 m range. Receiver: 12 /24 V; transmitter: wireless, 3,6 V battery with built-in solar panel

SAFETY DEVICES

FOTPhotocells

Features: • synchronized infrared beams• maximum range 20 m• beam alignment adjustable up to 15° • 12 / 24 V power input• surface mount (no welding required)

Pros: • compact design• design suits any architectural style• full range of accessories • removable mounting post cover for easy installation • photocells can be mounted inside the post in th-ree different positions• flat back post fits snugly against the wall and al-lows back-to-back installation

900OPTICSet of infrared safety photocells, 12 / 24 V, surface mount, beam alignment adjusta-ble up to 15°, up to 20 m range

900TOWERFPhotocell standard mounting post, pain-ted aluminium, 49 cm, with removable cover for easy installation and photocell adjustment

900TOWER2FPhotocell double mounting post, pain-ted aluminium, 98 cm, with removable cover for easy installation and photocell adjustment (optional key-switch and key-switch bracket to be ordered separately)

Photocells and Mounting posts

SAFETY DEVICES

OPTIC

Accessories

900CPTOWER TOWER counterplate

300TkEY Die-cast aluminium key switch

300TkEYS key switch bracket

300TkEYD Die-cast aluminium key switch, Euro Profile Cylinder

112 113

Features: • wide input voltage range 230 VAC, 24 VDC and 12 VDC• built-in aerial support• cycle count for maintenance alert available • built-in bracket for wall mount

Pros: • horizontal or vertical installation• versions with cycle count for maintenance alert will indicate when the requisite threshold (set by the user) has been reached

900LAMP112 V flashing light

900LAMP2230 V flashing light

900LAMP3230 V flashing light for TAU electronic control units



900LAMP3C230 V flashing light with cycle count for maintenance alert

900LAMP4C12 V flashing light with cycle count for maintenance alert

SAFETY DEVICES

LAMP

300RTAProximity transponder reader for access control. Maximum 80 users

Features: • 12 / 24 V power input• up to 80 users• NO / NC contact output• self-learning card memorization through master card

Pros: • ideal for small scale applications• simplified user management• 12 / 24 V power input• standalone system (no PC or special equipment needed) Accessories

300Pk key fob transponder

300CARD Transponder card

300APM 300RTA extended range aerial

for max. 80 users

ACCESS CONTROL

RTAFlashing light

114 115

Features: • electromechanical safety edge to stop the gate operator in case of impact • low voltage watertight micro switches • standard length: 1,2 and 1,8 m• controlled version available (8,2k Ω )

Pros: • ideal for up-and-over garage doors and swing gates• ensure compliance to EN 12445-12453 standards• possible wireless application; the safety edge fitted to the leading edge of the gate will offer ma-ximum safety and compliance to EN 12445-12453 standards

900KICM1201,20 m safety edge

900KICM1801,80 m safety edge

900KONT1201,20 m controlled safety edge (8,2K Ω)

900KONT1801,80 m controlled safety edge (8,2K Ω)

SAFETYEDGES

900TAP Set of 2 plugs for kICM/kONT

900CUR Set of 2 curves for kICM/kONT

900GIU Set of 2 joints for kICM/kONT

Features: • electromechanical safety edge to stop the gate operator in case of impact • rubber edge height: 60 mm • standard length: 1,5 and 2 m (longer edges avai-lable upon request)

Pros: • ideal for sliding gates and doors• possible wireless application; the safety edge fitted to the leading edge of the gate will offer ma-ximum safety and compliance to EN 12445-12453 standards

900KITCF2 m safety edge kit

900KITCF151,5 m safety edge kit

For sliding gates and doors

SAFETYEDGES

900TWC Wireless safety edge transmitter

900TWM Wireless safety edge master receiver

For up-and-over garage doors and swing gates

116 117

300TSG

300SC

300SES

300SCMS1

300SCE

300TSGWireless keypad, battery operated. Works with RXDC radio receivers or with electronic control units with built-in radio receiver

300SCEkey switch, surface mount

300SCKey switch, flush mount

300SESSurface-mounted, Europrofile cylinder, key switch with emergency release system and tamper-proof housing (for T-WIN central motors)

300SCMS1Magnetic key switch

OTHERACCESSORIES

300SCMS3 Decoder for 300SCMS1

300CMS Magnetic key

300SA1 Magnetic loop detector

300PPI Heavy duty pushbutton panel

300PP Pushbutton panel

Features: • available with standard or Europrofile cylinderdie-cast aluminium key switch• LED courtesy light available• surface or post mount

Pros: • tamper-proof• easy installation

300TKEYDie-cast aluminium key switch

300TKEYDDie-cast aluminium key switch, Europrofile cylinder

kEYSWITCHES

T-kEY

300TSL LED courtesy light for T-kEY

900TOWER2F Photocell double mounting post, painted aluminium, 98 cm, with removable cover for easy installation and photocell adjustment

300TkEYS key switch bracket

118 119

255

202

230101

255

202

230

131

750D750MElectronic control unit for one or two 230 V gate operators with soft-stop and built-in 433,92 MHz radio receiver, complete with enclosure

Accessories

S-750D752M10 Control unit enclosure protective lid

750COLC Control unit mounting post

Programmable Functions D750MAutomatic operation

Semiautomatic operation

Man present functions

Pre-flashing disable

Gate open led with proportional flashing

Gate open led

Limit switch

Photocell test at start of manoeuvre

Disable photocell test

Twin pair of photocells

Close 5 secs after photocells

Working time (TL) adjustment

Gate open time (TCA) adjustment

Gate open time (TCA) disable

Delay wing closing

Electronic force adjustment

Automatic realignment after black-out

Step-by-step operation (openstop-close-stop-open)

No reverse in opening manoeuvre

Pedestrian feature

Clock function

Encoder

Built-in radio card

Slow-down

Receiver preset for digital keypads

Outputs-Inputs D750MM1 outputM2 outputFlashing light outputCourtesy light outputElectric lock outputGate open LED output12 Vdc output for auxiliaries24 Vdc output for auxiliariesInternal photocell FTI outputExternal photocell FTE outputOpen/close inputPedestrian inputStop inputOpen button inputClose button inputSensitive edge input

For swing gates operators

ELECTRONIC CONTROL UNIT

D750M

750D747MElectronic control unit for one or two 12 V gate operators with encoder, complete with transformer and enclosure


D747MFor swing gate operators

12V O LT

Accessories

200BATT 12 V Battery, 7,2 Ah

750SCB12 Battery charger (optional)



Programmable Functions D747MAutomatic operation





Gate open led

Limit switch








Delay wing closing





Pedestrian feature

Clock function

Encoder

Built-in radio card

Slow-down


Outputs-Inputs D747MM1 outputM2 outputFlashing light outputCourtesy light outputElectric lock outputGate open LED output12 Vdc output for auxiliaries24 Vdc output for auxiliariesInternal photocell FTI outputExternal photocell FTE outputOpen/close inputPedestrian inputStop inputOpen button inputClose button inputSensitive edge input

120 121

255

202

230101

255

202

230

131

200K892MElectronic control unit for one or two 230 V up-and-over garage door openers with soft-stop, built-in 433,92 MHz radio receiver and enclosure

Programmable Functions K892MAutomatic operation





Gate open led

Limit switch








Delay wing closing





Pedestrian feature

Clock function

Encoder

Built-in radio card

Slow-down


Outputs-Inputs K892MM1 outputM2 outputFlashing light outputCourtesy light outputElectric lock outputGate open LED output12 Vdc output for auxiliaries24 Vdc output for auxiliariesInternal photocell FTI outputExternal photocell FTE outputOpen/close inputPedestrian inputStop inputOpen button inputClose button inputSensitive edge input

For up-and-over garage door openers


k892M

200K996MElectronic control unit for one or two 12 V up-and-over garage door openers with soft-stop, built-in 433,92 MHz radio receiver and enclosure


k996MFor up-and-over garage door openers

12V O LT

Accessories

200BATT 12 V Battery, 7,2 Ah

750SCB12 Battery charger (optional)






Gate open led

Limit switch








Delay wing closing





Pedestrian feature

Clock function

Encoder

Built-in radio card

Slow-down



122 123

49

112

112139

255

202

230101

750K330MElectronic control unit for 230 V central motors with built-in 433,92 MHz radio receiver, complete with en-closure






Gate open led

Limit switch








Delay wing closing





Pedestrian feature

Clock function

Encoder

Built-in radio card

Slow-down



For central motors


k330M

600D703230/400 V electronic control unit for one gate ope-rator with electrical brake, complete with enclosure


D703For commercial sliding gate operators

Accessories



Programmable Functions D703Automatic operation





Gate open led

Limit switch








Delay wing closing





Pedestrian feature

Clock function

Encoder

Built-in radio card

Slow-down


Outputs-Inputs D703M1 outputM2 outputFlashing light outputCourtesy light outputElectric lock outputGate open LED output12 Vdc output for auxiliaries24 Vdc output for auxiliariesInternal photocell FTI outputExternal photocell FTE outputOpen/close inputPedestrian inputStop inputOpen button inputClose button inputSensitive edge input

124 125

To find out the optimal size of the PV power system please contact our custo-mer care at: [email protected]

200MFR50 Watt photovoltaic panel complete with adjustment board and 27 AH battery

200MFR290 Watt photovoltaic panel complete with adjustment board and 27 AH battery

SOLAR POWER

MFR12V O LT

Features: • photovoltaic panels can be combined with all TAU 12 V operators• no need for power lines or a smart gridPros: • easy and quick installation• ideal when the installation is far from available power lines• battery ensures that the gate continues to work even in the event of prolonged cloudy weather• energy saving and environmental friendly

126 127

Point-Of-Purchase tools

Demo material

EXPO

C-SHOW01 Demogate with R18BENC underground swing gate operator

C-BLN Notepad

C-PENNA Pen

C-SHOW02 Demogate with T-ONE5B sliding gate operator

C-SHOW03 Demogate with ARM2000ENC swing gate operator

C-TOTEM Advertising totem pole, 165 cm

900FUSBUSB FORCE IMPACT GAUGESupplied in a cushioned carrying case complete with software (PC), USB cable for data transmission, handle key, memory up to 50 tests, instruction manual and calibration certificate. Linear extension for 30 to 50 cm included

900FBLUBLUETOOTH FORCE IMPACT GAUGESupplied in a cushioned carrying case complete with software (PC), Bluetooth Dongle key for data transmission, spanner for handle, memory up to 50 tests, instruction manual and calibration certificate. Linear extension for 30 to 50 cm included

IMPACT FORCE GAUGE

Features: • impact force gauge for automatic/power opera-ted doors/gates according to EN12445-EN12453 standards• display and internal storage allowing up to 50 measurements to be saved• interactive menu allows sending, deleting and scrolling saved tests

Pros: • quick and easy set-up and software installation • blue-tooth version allows a quick data transmis-sion to the PC for an immediate analysis of values and diagrams • with the extension (supplied) and the practical 180° turning handle all tests can easily be carried out even on difficult installations

128 129

A

L

B

C

260

90°

A

L

B

SALES CONDITIONS

Unless agreed otherwise, prices indicated in the current price-list are intended as ex works and inclusive packing in cardboard boxes. VAT and all Taxes are to the customer’s charge. The prices indicated in the current price-list are not binding and company TAU s.r.l. reserves the right to amend them without notice. TAU s.r.l. disclaims all resposibility for non-compliance of safety standars and for incorrect use of the product by unqualified installer. Company TAU s.r.l. conserves ownership of the goods supplied until such time as full payment has been made. For bulk quantities ask for offer.

DELIVERY: Ex works.GUARANTEE: See the certificate enclose to the product.

THESE GENERAL SALES CONDITIONS CANCEL AND REPLACE THE PREVIOUS VERSIONS IN USE.

SALESTERMS

N.B.: Due to its continued product improvement policy and its desire to more closely satisfy market requirements, TAU srl reserves the right to modify the technical data and the contents of this publication without prior notice. It also declines liability for any printing or transcription errors.

SPECS

Installation sizes (mm)*

EASYwith articulated arm

Installation sizes (mm)*

EASY with BRCE1

* Follow the instructions for the installation * Follow the instructions for the installation

ARM200Installation (mm)

EASYInstallation (mm)

ARM2000Installation (mm)

BRCE1Installation (mm)

140

minimo250 mm

90°

Code Door opening A B C LARM225 - ARM225BENC

90° 80 ÷ 180 110 ÷ 200 20 1080100° 100 ÷ 150 110 ÷ 150 20 1080

ARM250 - ARM250BENC

90° 80 ÷ 200 115 ÷ 250 20 1360100° 100 ÷ 200 115 ÷ 250 20 1360

ARM270 - ARM270BENC

90° 80 ÷ 250 120 ÷ 300 20 1570100° 130 ÷ 250 120 ÷ 300 20 1570

Code Door opening A B LARM2000/F - ARM2000ENC

90° 140 ÷ 190 150 ÷ 210 805100° 170 ÷ 175 150 ÷ 155 805

ARM2000FC 90° 140 ÷ 190 150 ÷ 210 775100° 170 ÷ 175 150 ÷ 155 775

radio receivers tecnology

Documents