rajiv gandhi rural housing corporation limited user manual gps based physical progress report...
TRANSCRIPT
Rajiv Gandhi Rural Housing Corporation Limited
User Manual
GPS based Physical Progress Report Updation
Concept and Purpose
• To capture unique GPS Co-ordinates of the area.
• To avoid duplications.
• To maintain transparency.
• “Fund Releases” based on GPS based Physical Progress Updation.
HARDWARE USED FOR CAPTURING PHOTO AND GPS CO-ORDINATES
Samsung Galaxy-Y GT-S5360
Micro SD Card 8 GB
How to install Application and Database software to the Mobile phone
1. Download “GPS Mobile Software” from:• http://ashraya.kar.nic.in • Download Menu.• Download Sub Menu.• Click GPS Mobile Software to download.
2. Save the file on desktop of your local computer.3. The downloaded file is named as “RGRHCL.zip” a folder by name “RGRHCL” will
be there, containing one folder and one file as shown below:
4. Connect Mobile phone to the computer using Data Cable and copy the above said RGRHCL folder and RGRHCL.apk file to Micro SD Card 8 GB.
5. Disconnect the mobile phone from the computer and Run / Open RGRHCL.apk file from Micro SD Card 8 GB, through mobile, which will install the software onto the mobile.
6. End of the Mobile Software Installation…
How to Download the Physical Progress Data from Online Application
http://ashraya.kar.nic.in/ashrayanew
TNO should login using Taluk Login ID
and Password
Click on this sub-menu…
NOTE: 1. PDO’s can download the GPS Data under GP Login. Only IAY scheme data can be downloaded for PDO’s.2. TNO’s can download the GPS Data under Taluk Login. Only Basava Housing Scheme and SDP Scheme
data can be downloaded for TNO’s.
Contd…
Checklist Download
STEP-1Input.csv file will be saved on the desktop of the local computer.
STEP-2Connect the mobile phone to the computer using data cable, where Input.csv file is residing. Copy the Input.csv file to the Micro SD Card RGRHCL <Folder> of the mobile phone.
How to use Mobile Software
RGRHCLAp
Click here to Open the application software…
How to use Mobile Software
Enter Benf. Code and click on Go button…
These details are displayed automatically on entry of Benf.Code and click of Go button for confirmation.
This displays the GPS Accuracy for information.
By default Yes will be ticked. If the Site or House not found, tick No.
Click to Save the record.
Progress Progress shown, but GPS not captured.
Status Once the Photo is captured, the status will turn to Captured.
Photo Click here to capture the Photo.
1st Photo to be taken out side the house / site, it should be clearly visible.2nd Photo to be taken inside the house / site exactly in the Center of four corner, which capture the GPS co-ordinates.
How to Upload / Transfer data from Mobile phone to the Central Server
STEP-1Connect the mobile phone to the computer using data cable.
STEP-2Press the finger on this area and drag towards down. And click on USB Connected Connect Storage to PC OK.
STEP-3
Open Micro SD Card by double clicking on Removable Disk drive and copy RGRHCL folder to ‘C’ Drive of your local computer.
How to Upload / Transfer data from Mobile phone to the Central ServerSTEP-4Login to Online Application and follow the steps as shown below:
Click on this sub-menu…
STEP-5
Select Database File : C:\RGRHCL\Database\BenfDetails.db Browse…
Data Uploaded successfully…
Smt. Madhu [email protected]
Sri. Subbu [email protected]
Sri. [email protected]
Contact:
Tel(Off): 080-23118888 Ext: 45/ 46/ 47/ 49
Thank you!!!