rakiro corp book -cover pages - 13...
TRANSCRIPT
Reverse Osmosis Chemicals
Cooling Water Chemicals
Boiler Water Chemicals
Sugar Process Chemicals
Specialty Chemicals
Fireside AdditivesSolid Fuel AdditiveFurnace Treatment Compound
Handheld Meters
Multiparameter Meters
Portable Meters
Bench Top Meters
Onilne Meters
Electrodes
Analyzing WatersAnytime... Anywhere...
3
AQUASOL test kits are extremely simple and easy to use & make monitoring convenient and quick, thus preventive
action can be taken immediately. You neither have to be a trained chemist nor require any experience to get reliable
results from these test kits.
AQUASOL test kits based on standard and established analytical methods, backed by chemical research. These are
simple adaptations of classic chemical analytical methods. The analytical methods are based on Standard Methods for
Examination of Water and Waste Water prepared by American Public Health Association (APHA), American Water
Works Association (AWWA), different pharmacopoeias and other standard methods.
You can have complete confidence in the results you obtain from AQUASOL, as they are extremely reliable. AQUASOL®
systems replace conventional analytical methods such as Titrimetric, Colorimetric and Spectrophotometric by simple
drop test & standard colour comparison methods.
AQUASOL reagents are completely ready to use, conveniently packed, and therefore user
friendly. Our drop count procedures and colour comparisons tests are economical.
AQUASOL test kits are extremely convenient, and free you from the tedium of the
laboratory, while saving precious time. Now you do not have to bother about reagent
preparations and standardization. Therefore AQUASOL test kits have been designed
especially for you, who require accuracy of the highest standards.
AQUASOL test kits are available for almost all water parameters.
Calcium
Hardness
Colour
Change
Chlonide
Colour
Change
Alkalinity
Colour
ChangeHydrazine AE 304
1.25 ppm
0.2 ppm
.1 ppm0
m
0.75 pp
0.3 ppm
.0 ppm1
0214
0.4 ppm 0.9 ppm
4
Notes: Reagent Refill Sets are available in a pack of 3 for all the above mentioned products
Individual Test Kits
No. Code Parameter Range No. of Tests/Kit
DROP TITRATION
1 Total Hardness AE 201 2– 40,5–100 mg/l as CaCO 2503
2 Total Hardness AE 211 2 – 40, 25 – 500 mg/l as CaCO 2503
3 Total Hardness AE 221 5 – 100, 25 – 500 mg/l as CaCO 2503
4 Total Hardness AE 231 1 – 20, 5 – 100 mg/l as CaCO 2503
5 Total Hardness AE 241 50 – 1000 mg/l as CaCO 2503
6 Total Hardness AE 501 2 – 40, 5 – 100 mg/l as CaCO 5003
7 Total Hardness AE 511 2 – 40, 25 – 500 mg/l as CaCO 5003
8 Total Hardness AE 521 5 – 100, 25 – 500 mg/l as CaCO 5003
9 Total Hardness AE 531 1 – 20, 5 – 100 mg/l as CaCO 5003
10 Total Hardness AE 541 50 – 1000 mg/l as CaCO 5003
11 Acidity AE 264 10 – 200 & 100 – 2000 mg/l as CaCO 3003
12 Alkalinity AE 204 10 – 200, 100 – 2000 mg/l as CaCO 3003
13 Alkalinity AE 214 5 – 100, 25 – 500 mg/l as CaCO 3003
14 Amine ( For Boiler water only) AE 402 5 – 100 & 50 – 1000 mg/l as Cyclohexylamine 300
15 Amine ( For Boiler water only) AE 412 1 – 20 mg/l as Cyclohexylamine 300
16 Bromine AE 404 0.1 to 2.0 mg/l as Bromine 100
17 Calcium Hardness AE 202 5 – 100 mg/l as CaCO 3003
18 Calcium Hardness AE 212 25 – 500 mg/l as CaCO 3003
19 Carbon Dioxide AE 403 2 – 40 & 10 – 200 as CO 3002
20 Chemical Oxygen Demand (COD) AE 407 40 to 400 mg/l as COD 100
21 Chloride AE 203 10 – 200, 50 – 1000 mg/l as Chloride 300
22 Chloride AE 213 2 – 40, 5 – 100 mg/l as Chloride 300
23 Chloride AE213L 1 – 20 mg/l as Chloride 300
24 Chlorine (Idometric) AE 246 10 – 200 mg/l as Chlorine 300
25 Chlorine (Idometric) AE 246L 1 – 20 mg/l as Chlorine 300
26 Chlorine Dioxide AE 405 0.2 – 4.0 mg/l as Chlorine Dioxide 100
27 Chromate (Hexavalent) AE 208 5 – 100, 25 – 500 mg/l as Chromate 200
28 Dissolved Oxygen AE DO8 0.5 – 8.0 mg/l as O 2502
29 Fluoride AE 210 0.1 – 2.0, 1 – 20 mg/l as Fluoride 500
30 Free Chlorine (DPD) AE 205 0.1 – 2.0 mg/l as chlorine 100
31 Free Chlorine (DPD) AE 215 0.2 – 4 mg/l as chlorine 100
32 Hydrogen Peroxide (Iodometric) AE HP 5 – 100 & 25 – 500 mg/l as H O 3002 2
33 Iodine AE 406 0.1 – 2.0 mg/l as Iodine 100
34 Nitrite AE 207 5 – 100, 50 – 1000 mg/l as NaNO 3002
35 Phosphonate / Sequestrant as HEDP AE 401 5 – 100 & 50 – 1000 mg/l as HEDP 300
36 Phosphonate / Sequestrant as HEDP AE 411 2 – 40 & 5 – 100 mg /l as HEDP 300
37 Sulphate AE 209 10 – 200, 50 – 1000 mg/l as Sulphate 350
38 Sulphite AE 206 5 – 100 mg/l as Na2SO 3003
39 Tannin AE 2TN 5 – 100, 25 – 500 mg/l as Tannin 300
Sr. No. Parameter Code Product Range No. of Tests/Kit
5
AQUASOL Test Kits are available for almost all water parameters in individual packs, as well as combination packs, depending on the specific requirements of different industries. Also for any specific requirements, Custom Made AQUASOL Systems can be devised both as Individual or Combination Kits.
AQUASOL : Application in Different Water Systems
Water Industries Applications ParametersSystems
Cooling Pulp & Paper, Textile, Steel, Fertilizers, Refineries, Make-up Water, Total Hardness, pH, Chloride, Alkalinity,Systems Chemical Manufacturing Units, Sugar, Recirculating Water, Calcium Hardness, Silica, Free Chlorine,
Thermal Power Stations, Engineering Units Basin Water Phosphate/Phosphonate, Iron
Boiler Pulp & Paper, Textile, Steel, Fertilizers, Raw Water, Softener, Total Hardness, Calcium Hardness, Alkalinity, Chemical Manufacturing Units, Refineries, Sugar, Blowdown Water, pH, Silica, Phosphate, Iron, Chloride, Sulphite, Thermal Power Stations, Engineering Units Feed Water, Boiler Water
Potable Universal Drinking Water Total Hardness, Alkalinity, Chloride, Iron,Water Fluoride, Nitrate, Calcium Hardness,
Free Chlorine, pH, Turbidity
RO Water Industries having Reverse Osmosis Feed Water and pH, Total Hardness, Calcium Hardness, Silica, (RO) Plants Permeate Water Sulphate, Iron (Low Level), Nitrate,
Nitrite (Low Level)
Swimming Hotels & Resorts, Houses Monitoring of pH, Free ChlorinePool Pool Water
Purified Pharmaceuticals Purified Water Acidity, Alkalinity, Calcium, Magnesium, Chloride Water Ammonium, Sulphate, Heavy Metal as Pb,
Metal Working Engineering Units Process / D. M. Water Total Hardness, Chloride, pHFluid
Individual Test Kits
No. Code Parameter Range No. of Tests/KitSr. No. Parameter Code Product Range No. of Tests/Kit
COLOUR COMPARISONS
40 Ammonium AE 307* 0.5, 1.0, 2.0, 4.0, 6.0, 8.0 mg/l as NH 2504
41 Ammonium AE 317* 0.05, 0.1, 0.25, 0.5, 0.75, 1.0 mg/l as NH 1004
42 Arsenic AE 408* 0.0, 0.05, 0.1, 0.2, 0.5, 1.0, 2.0, 3.0 mg/l as Arsenic 100
43 Copper AE 310* 0.25, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 4.5, 5.0 mg/l as Copper 250
44 Free Chlorine - Chloroscope (OT) AE 409* 0.05, 0.1, 0.2, 0.4, 0.7, 1, 2, 3, 4, 5 mg/l as Cl 10002
45 Hydrazine AE 304* 0.1, 0.2, 0.3, 0.4, 0.75, 0.9, 1.0, 1.25 mg/l as Hydrazine 200
46 Iron (Dissolved) AE 303* 0.0, 0.05, 0.1, 0.3, 0.4, 0.5, 0.7, 1.0, 1.5, 2.0 Mg/l as Fe 175
47 Iron (Dissolved) AE 313* 0, 2, 4, 6, 8, 10 mg/l as Fe 175
48 Molybdate AE 309* 5, 10, 20, 30, 40, 50 mg/l as MoO 3254
49 Nitrate AE 308* 0.5, 1.0, 2.5, 5, 7.5, 10, 20, 30, 40, 50 mg/l as NO 4003
50 Nitrite AE 217* 0.05, 0.1, 0.2, 0.3 ,0.4, 0.5, 0.6, 0.7, 0.8 mg/l as NO 4002
51 Orthophosphate AE 301* 0.0,5, 10, 20, 30, 40 mg /l as PO 1004
52 Orthophosphate AE 311* 0.1, 0.2, 0.5, 1.0, 2.5, 5.0, 7.5, 10 mg/l as PO 5004
50 pH AE 306* 4 to 10 250
53 Silica AE 302* 5, 10, 20, 40, 60, 80 mg/l as SiO 4002
54 Silica AE 312* 0.01, 0.025, 0.05, 0.075, 0.1 mg/l as SiO 752
55 Silica AE 322* 0.05, 0.1, 0.2, 0.4, 0.8, 1.5, 3.0, 5.0 mg/l as SiO 1002
56 Silica AE 332* 75, 100, 125, 150, 175, 200 mg/l as SiO 1002
57 Turbidity AE 300* 1, 5, 10, 20, 25 NTU NA
58 Zinc AE 305* 0.1, 0.25, 0.5, 1.0, 2.5, 5.0, 7.5 mg/l as Zinc 450
Swimming Pool Test Kit 0.5 to 5.0 PPM as Chlorine 50059 AE 105*
(pH + Free Chlorine) 6.5 to 9 as pH 250
6
Our Aquasol Combination Kits are Available in One Single Pack for Multiple Parameters.
Water is the major ingredient in a water soluble metalworking fluid mix. Corrosion, residue, scum, rancidity, foam, excess concentrate usage, or almost any metalworking fluid performance problem can be caused by the quality of the water used in making the mix. Some impurities affect drastically by reacting or combining with metalworking fluid ingredients. These impurities can change performance characteristics. Therefore, water treatment is necessary to obtain the full benefits of water soluble metalworking fluids.
Combi Kit
PURIFIED WATER (Product Code: AE 106)
METAL WORKING FLUIDS (Product Code: AE 107)
Highly purified water is an essential component of biopharmaceutical industry. It is used as an ingredient in both research procedures and drug formulations and also for general cleaning, rinsing, etc. In each case the water source must be processed and treated to microbial and chemical contaminants that would otherwise compromise the quality, safety, efficacy and purity of finished product.
RO WATER (Product Code: AE 104)
Reverse Osmosis (RO) is a modern process to purify water for a wide range of applications, including semiconductors, boiler feed water treatment, food processing, biotechnology, pharmaceuticals, power generation, seawater desalting, and municipal drinking water. It is important to check chemical and physical parameters of RO water for proper functioning of the RO plant.
pH Total hardness Nitr i teSilica Sulphate Iron Nitrate Calcium Hardness
DRINKING WATER (Product Code: AE 103)
Drinking water is supposed to be safe for consumption by humans and animals. Water may be naturally safe, or it may need to be treated in order to be safe. Water which is not safe to drink can carry disease causing bacteria and heavy metals.
Proper pre-treatment of Boiler feed water is an important part of operating and maintaining a boiler system. In order to protect the boiler, contaminants, should be eliminated or at least reduced through external or internal treatment.
BOILER (Product Code: AE 102)
COOLING WATER SYSTEMS (Product Code: AE 101)Water is required to be cooled for many processes, for example air conditioners, manufacturing processes or power generation, etc. Cooling systems are plagued with corrosion. Many factors affect corrosion rates in a given cooling water system. The presence of dissolved gases, chloride and sulfate levels, pH, alkalinity, scaling tendency, and protective ions such as calcium, magnesium, phosphate nitrate, and silicate must all be taken into consideration. The first step to control is detection therefore regular monitoring of the above is absolutely essential.
Total Hardness Alkalinity Chloride Turbidity Nitrate Fluoride Free chlorine pH Iron
Following parameters can be analyzed
Following parameters can be analyzed
Acidity Alkalnity CalciumMagnesium Ammonium SulphateChloride Heavy metal as Pb
Following parameters can be analyzed
Following parameters can be analyzed
Following parameters can be analyzed Total Hardness pH, C hlorideAlkalinity C alcium Hardness SilicaFree chlorine Orthop hosphate Iron
Total Hardness pH C hloride
Following parameters can be analyzed Total Hardness pH C hlorideAlkalinity C alcium Hardness SilicaSulphite Orthop hosphate Iron
(Dissolved)
(Dissolved)
(Dissolved)
(Dissolved)
6
Aquasol Soil Test Kit (AE - STK)Soil testing is the analysis of a soil sample to determine it's composition, and other major nutrient characteristics. A soil test can determine fertility, or the expected growth potential of the soil which indicates nutrient deficiencies, potential toxicities. The advantages of testing are that excessive use of fertilizer can be avoided which results in reduction of Waste of plant & potential damage to environment can be controlled. Therefore it makes good sense to test the soil for these nutrients and add the required amount of fertilizer. Soil has to contain some major nutrient for the crops to be healthy. The major nutrients which need to be in adequate quantities for the soil to be productive and subsequently give a healthy crop are:
NITROGEN - Nitrogen encourages above ground vegetative growth & it serves as the source for the dark green color in the leaves of various crops.
PHOSPHOROUS - Phosphorus is a component of the complex nucleic acid structure of plants, which regulates protein synthesis. It is therefore, important in cell division and development of new tissue in roots.
POTASSIUM - Potassium takes care of multiple functions like Photosynthesis, Protein Synthesis, and Starch formation and for the translocation of Sugars. It also imparts resistance to the plant against Microbial attack and if deficient results in poor flowering and fruit formation.
pH - pH is important because it influences how easily plants can take up nutrients from the soil. Also is useful in prevention of soil borne disease.
ORGANIC CARBON - Soil carbon improves the physical properties of soil and water-holding capacity of sandy soil. Also it contributes to the structural stability of clay soils by helping to bind particles into aggregates of which carbon is a major part, holds a great proportion of nutrients that are of importance to plant growth. It prevents nutrient leaching, and is integral to the organic acids that make minerals available to plants.
Our specially developed SOIL TEST KIT is available in a ready to use portable pack which is extremely easy to use & get precise results. It has all the required reagents and accessories to carry out on site test for all the above mentioned parameters with convenience and accuracy.
7
Monitor pH, Chlorine&Harmful Bacteria
Bacteria spread through people. Even best maintained swimming pools can spread illnesses due to these microscopic predators, the bacteria.
Therefore to ensure a disease free swimming experience, regular disinfection of the water is essential. Water below pH 6 or above pH 8 could be uncomfortable for skin.
Chlorine and pH can be monitored daily with the AQUASOL Combi Kit for Swimming pools. This is extremely easy to use and can be used anytime, anywhere. The results are achieved within minutes. The test is rapid, reliable and accurate. You don't need a laboratory nor trained manpower.
Now to be doubly sure that the chlorine dose is effective, monitoring of harmful bacterial content is essential. However, detection of these unseen predators is always a tedious and time consuming task, in a laboratory, by the conventional methods of microbiology.
ChekNSee, an easy to use water potability test can be performed by anyone, anywhere in a matter of a few minutes. ChekNSee tests E.coli, the indicator of Faecal contamination. All the National and International Standards of Drinking Water are in terms of E.coli.
Aquasol Swimming Pool Test Kit (AE - SPK)The first thought that comes to mind when we think of safety in swimming pools is drowning, slipping and falling, etc. But do we really know that the most probable hazard is contamination by germs, viz. bacteria. Therefore the likelihood of us falling prey to these sicknesses is much more than that of drowning, etc.
Aquasol Soil Test Kit (AE - STK)Soil testing is the analysis of a soil sample to determine it's composition, and other major nutrient characteristics. A soil test can determine fertility, or the expected growth potential of the soil which indicates nutrient deficiencies, potential toxicities. The advantages of testing are that excessive use of fertilizer can be avoided which results in reduction of Waste of plant & potential damage to environment can be controlled. Therefore it makes good sense to test the soil for these nutrients and add the required amount of fertilizer. Soil has to contain some major nutrient for the crops to be healthy. The major nutrients which need to be in adequate quantities for the soil to be productive and subsequently give a healthy crop are:
NITROGEN - Nitrogen encourages above ground vegetative growth & it serves as the source for the dark green color in the leaves of various crops.
PHOSPHOROUS - Phosphorus is a component of the complex nucleic acid structure of plants, which regulates protein synthesis. It is therefore, important in cell division and development of new tissue in roots.
POTASSIUM - Potassium takes care of multiple functions like Photosynthesis, Protein Synthesis, and Starch formation and for the translocation of Sugars. It also imparts resistance to the plant against Microbial attack and if deficient results in poor flowering and fruit formation.
pH - pH is important because it influences how easily plants can take up nutrients from the soil. Also is useful in prevention of soil borne disease.
ORGANIC CARBON - Soil carbon improves the physical properties of soil and water-holding capacity of sandy soil. Also it contributes to the structural stability of clay soils by helping to bind particles into aggregates of which carbon is a major part, holds a great proportion of nutrients that are of importance to plant growth. It prevents nutrient leaching, and is integral to the organic acids that make minerals available to plants.
Our specially developed SOIL TEST KIT is available in a ready to use portable pack which is extremely easy to use & get precise results. It has all the required reagents and accessories to carry out on site test for all the above mentioned parameters with convenience and accuracy.
Soil Test Kit
Swimming Pool Kit
Dip Slide Test
Pouch Pack Test
Algae Test
Water Potability Test
Sulphate Reducing Bacteria (SRB) Test
9
BACTASLYDE is a quick, easy & economical means of monitoring bacteria in liquids , solids and also on surfaces. It is used virtually in any
industry by engineers, water treatment professionals and facilities management specialists to make bacteria testing quick and easy.
BACTASLYDE is regularly used worldwide for monitoring microbiological contamination and has been found to be reliable as it compares
well with conventional microbiological techniques. BACTASLYDE is extremely easy and can be used even by a non technical person at site
very effectively as it does not require any laboratory or additional equipment. It is an economical & no capital investment is required.
BACTASLYDE helps to improve efficiency, prolong equipment life and reduce breakdowns.
What is BACTASLYDE?
• Avoid breakdowns • Optimise usage of water treatment chemicals • Improve efficiency • Prolong equipment life Provide healthier working environment • Reduce corrosion
WHY BACTASLYDE ?
BACTASLYDE RANGE
*TBC = Total Bacterial Count
BS-PP1
BS-PP2
BS-PP3
BS-PP4
Iron Bacteria
Salmonella
Staphylococcus Aureus
Vibrio
Cooling Waters, Open Ponds, Water Outfalls from Pipelines, Metal Working Fluids.
Food, Eggs, Egg Powder, Spices, Fisheries, Hospitals
Food, Milk Products, Fresh Fish, Meat, Sauces, Canned Foods, Hospitals.Cooling Tower Water, Metal Working Fluids.
Food, Fisheries, Processed Fish viz. Cooked deep frozen Prawns & Shrimps.
POUCH PACK
DIPSLIDEBS101
BS102
BS 103
Yeasts & Fungi + TBC*
Escherichia coli + TBC*
Pseudomonas + TBC*
Food, Soft Drink & Ice-cream, Dairy, Breweries, Pharma, Hospitals, Paper & Pulp, Paint & Pigment, Metal Working Fluids.
Food, Soft Drink and Ice-cream, Pharma, Dairy, Water & Waste Water Treatment
Food, Soft Drink and Ice-cream, Pharma, Dairy, Paper & Pulp, Paint & Pigment, Cooling Tower Water, Metal Working Fluids.
10
At room temperature (18-32°c) No need of
an Incubator
Match with Density Chart
Dip for 20-25 seconds. Use a clean container to
hold the test material
Step 1Dip
Step 2Incubate
Step3Read
How to use ®BACTASLYDE
Dip Slide?
BACTASLYDE POUCH PACK is an easy to use test kit with specially developed media for
various bacteria that will enable you perform a presence or absence test. Even one organism
if not desired in the sample material can be tested and analyzed. Its enables you to perform
onsite bacteria test & can be used virtually in any industry. BACTASLYDE has been found to be
reliable and compares well with conventional microbiological techniques. Such slides are in
regular usage, worldwide, for monitoring microbiological contamination. Our ready to use
Bacteria Test kit has media pouch with sterile container and supplied in a pack of 5 along
with the complete instructions set.
BACTERIA POUCH PACKS TEST
4. Keep in a warm place for 18 to 24 hours.
(The colour of media would change if the bacteria species under test is present.)5. Observe the colour
BACTASLYDE is a presterilized plastic paddle coated with specially developed proprietary
media on each side for the growth of a variety of bacteria, yeasts & fungi. Its dual media
enables you perform the Total Bacterial Count on one side and the specific bacteria
species count on the other side at the same time in just 24 hours. BACTASLYDE has been
found to be reliable and compares well with conventional microbiological techniques.
Such slides are in regular usage, worldwide, for monitoring microbiological
contamination. BACTASLYDE is supplied in a pack of 5 along with the complete
instructions & a density chart for quantitative analysis of bacteria.
DIP SLIDE TEST
How to use ®BACTASLYDE
Pouch Pack?
1. Cut open both the pouches carefully
2. Pour the pouches into the bottle
contents of both 3. Pour water upto the red arrow mark.
Algae the plant like microorganisms are prolific invaders of the open exposed parts of cooling systems such as the tower & the pond areas. They will grow rapidly if conditions are right and only require light; CO & water to synthesize their growth. Algae are often visible 2
as green, felt-like mats in internal sections of cooling towers that are wet and accessible to sunlight. Algal growth is extremely unsightly and will reduce the efficiency of the cooling tower as a heat exchanger. Loosened deposits will block & foul pipe work & other heat exchange surfaces. The dead cells contribute to the formation of the complex organic material “Humus”which supports the growth of other microorganisms particularly the anaerobic types. Filamentous and capsulated colonial algae coat splash packing thus
interfering with the formation of droplets, which aid intimate contact of water and air. Algal growth prevents rainwater from wetting film packing and forming thin films which are detrimental to the rate of heat rejection. The medium used in BS 125 has been specially formulated for the growth of a wide variety of Algae species viz. green, bluegreen, brown, red etc. BS 125 is extremely easy to use. Just cut open media pouch and empty contents into the tube provided. Now add water sample to be tested upto red arrow mark. Place the tube on the Energy Source. Observe the colour of the tube every day, for 4 days.
SULPHATE REDUCING BACTERIA (SRB) TEST KIT
Algae the plant like microorganisms are prolific invaders of the open exposed parts of cooling systems such as the tower & the pond areas. They will grow rapidly if conditions are right and only require light; CO & water to synthesize their growth. Algae are often visible 2
as green, felt-like mats in internal sections of cooling towers that are wet and accessible to sunlight. Algal growth is extremely unsightly and will reduce the efficiency of the cooling tower as a heat exchanger. Loosened deposits will block & foul pipe work & other heat exchange surfaces. The dead cells contribute to the formation of the complex organic material “Humus”which supports the growth of other microorganisms particularly the anaerobic types. Filamentous and capsulated colonial algae coat splash packing thus
interfering with the formation of droplets, which aid intimate contact of water and air. Algal growth prevents rainwater from wetting film packing and forming thin films which are detrimental to the rate of heat rejection. The medium used in BS 125 has been specially formulated for the growth of a wide variety of Algae species viz. green, bluegreen, brown, red etc. BS 125 is extremely easy to use. Just cut open media pouch and empty contents into the tube provided. Now add water sample to be tested upto red arrow mark. Place the tube on the Energy Source. Observe the colour of the tube every day, for 4 days.
Algae the plant like microorganisms are prolific invaders of the open exposed parts of cooling systems such as the tower & the pond areas. They will grow rapidly if conditions are right and only require light; CO & water to synthesize their growth. Algae are often visible 2
as green, felt-like mats in internal sections of cooling towers that are wet and accessible to sunlight. Algal growth is extremely unsightly and will reduce the efficiency of the cooling tower as a heat exchanger. Loosened deposits will block & foul pipe work & other heat exchange surfaces. The dead cells contribute to the formation of the complex organic material “Humus”which supports the growth of other microorganisms particularly the anaerobic types. Filamentous and capsulated colonial algae coat splash packing thus
interfering with the formation of droplets, which aid intimate contact of water and air. Algal growth prevents rainwater from wetting film packing and forming thin films which are detrimental to the rate of heat rejection. The medium used in BS 125 has been specially formulated for the growth of a wide variety of Algae species viz. green, bluegreen, brown, red etc. BS 125 is extremely easy to use. Just cut open media pouch and empty contents into the tube provided. Now add water sample to be tested upto red arrow mark. Place the tube on the Energy Source. Observe the colour of the tube every day, for 4 days.Energy Source
Sulphate-reducing bacteria (SRB) are those bacteria that can obtain energy by oxidizing organic compounds or molecular hydrogen while reducing sulphate to hydrogen sulphide. They are also know as sulphide generating bacteria (SGB) and commonly found in anaerobic environments where they aid in the degradation of organic materials like secondary oil recovery effluents, estuarine waters, deep wells, cooling waters, metalworking fluids, water-based hydraulic fluids, and petroleum based products. They can survive up to 60°C & cause pitting corrosion on metal structures that are exposed to sulphate-containing water by cathodic depolarization. Since sulphate is also found in some other formulations used in
wat e r t re at m e nt , v i z , co r ro s i o n inhibitors, coolants, etc. They also play a role in the anaerobic oxidation of methane below the seabed in the transition zone which leads to heavy production loss.
Sulphate acts as a hydrogen acceptor produces hydrogen sulphide and ferrous sulphide. These together form a malodorous black slime. In some case bubbles of H S rise though the 2
water and cause objectionable odors. The corrosion of iron by sulphate reducing bacteria is rapid and unlike ordinary rusting, is not self – limiting. Our specially developed test kit with a unique 40ml sample size gives a much reproducible quantitative analysis of the SRB count in a sample. BACTASLYDE 115 is supplied in a pack of 5 along with the complete instructions set for a quantitative analysis of the contamination.
ALGAE TESTING SYSTEM
TYPE
Energy Source + Media
Media Refill Pack
CODE
BS 125
BS 125 R
SUITABLE FOR
Cooling Tower Water, Sewage Treatment Pond, Effluent Treatment Pond
Lakes, Rivers, Water Reservoirs etc.
CODE
BS115
TYPE
Sulphate Reducing Bacteria
SUITABLE FOR
Paper & Pulp, Cooling Tower Water, Metal Working Fluids, Injection water etc.
12
Paint & Pigments Process & production waters, raw materials, BS 101, BS 102, BS 103Finished products (water based paint & pigments)
Metal Working Fluids Cutting oils, coolants in the sump, BS 101, BS 103, BS 115raw water (make-up)
Cooling Water Systems Make-up waters, cooling waters, (recirculating BS 103, BS 115 , BS PP 1water, basin water)
Food Processing Raw materials (e.g. cream, milk, meat, fish, BS 101, BS 102, BS 103, Industry vegetables), Water used for production and BS PP2, BS PP 3, BS PP 4,
cleaning purpose, finished products (e.g. meat / BS 125fish preparations, cakes, soups, sauces, jams, squashes, spices)
Pulp & Paper Industry White waters (slurry and pulp mixtures), BS 101, BS 103, BS 115 process waters
Sugar Industry Primary, mixed, clarified juice, process waters, BS 101, BS 103, BS 115finished sugar
Water Treatment Laboratory and onsite, evaluation of biocides BS 103, BS 115 , BS PP 1Chemical Manufacturers Manufacturers Process waters, production water,Bulk Drug (demineralized water) BS 103, BS 115
Manufacturers Monitoring of waste water at different stages BS 102, BS 103, BS 115Water & Waste WaterTreatment Systems
Cosmetics Process waters. (demineralized water) BS 101, BS 102, BS 103, raw materials, finished product. BS PP 2, BS PP 3
Dairy Raw milk, pasteurised milk, evaluation BS 101, BS 102, BS 103 , of the cleaning-in-process. BS PP 2, BS PP 3
Brewery Process waters, pasteurised Beer BS 101 , BS 102,fermentation broth. BS 103, BS 115
Water Based Process waters, raw materials, finished product BS 101, BS 103, BS 115Adhesives
Oil and Petroleum Injection waters, fuel (petrol, aviation) BS 101, BS 103, BS 115
Fisheries Ponds, Sea water, Processed products BS 102, BS PP 2, BS PP 3, BS PP4
Industry Application Bactaslyde Code
MethodsCapital involved manpower of sample
No. of Steps Trained Pre treatment Maintenance Convenience Investment
Plate Count Method 6 Required Not Required Required Tedious Required
Most Probable Number 6 Required Not Required Required Tedious Required
Membrane Filter 6 Required Not Required Required Tedious Required
Direct Counts 4 Required Required Required Convenient Required
Bioluminescence 3 Required Essential Required Convenient Required
Direct Epifluorescence 6 Required Essential Required Convenient RequiredTechnique (DEFT)
BACTASLYDEConvenient
1 Not Required Not Required Not Required Most Not Required
BACTASLYDE : Comparison with Other Methods
BACTASLYDE : Application in Different Industries
Water contaminated with bacteria is a major cause of water-borne disease in humans. Enteric diseases like diarrhoea, dysentery, typhoid, paratyphoid, gastroenteritis, cholera, etc. are caused by the tiny menaces viz bacteria.
Detecting these dangerous but unseen predators is quite a tough task. Normally it is the domain of the white coated microbiologist who works amidst sterile conditions and a lot of hush hush secrecy.
No longer! Modern science has now made testing so easy and convenient.
No laboratory! No hassles!! No hush hush secrecy!!! Just ChekNsee!
ChekNsee tests a group of bacteria, which are found in sewage. They are present in the intestine of man and animal and are generally accompanied by the harmful disease causing bacteria.
Do it yourself easily to check and see!
Power to see the Invisible Danger
Drinking Water Test
Check Se& e
he W ter ouT a Y
inkDr .
ChekNsee helps to check water from all kinds of sources viz.
• Taps • Purifiers • Coolers • Storage Tanks• Rivers • Ponds • Springs
This extremely simple and convenient test can be carried out by anybody, anywhere i.e.
• Homes • Offices • Factories • Shops• Banks • Hospitals • Hotels • Schools
If the Colour is Voilet Water Is Potable
If the Colour Changes to Yellow Water Is Not Potable
Chlorine
Temperature
Conductivity
Turbidity
ORP
O 2
DOpH
ECTDS
Total Chlorine
Free Chlorine
Bench Top Meters
Electrodes
Pen Type Meters
Digital InstrumentsHand Held Meters
Portable Meters
Multiparameter Meter
Calibration Solution
15
Features :?Microprocessor based Fast, Reliable and Accurate
measurement.
?Replaceable Electrode Module.
?Waterproof Impact resistant ABS case (IP 57).
?Large LCD display for reading convenience.
?Easy Calibration.
?Available in a portable pouch.
? Manufacturer Warranty for 6 Months.
Our portable hand held testers are, waterproof and dustproof meters that float if dropped in liquid. have an IP 57
rating for protection against solid objects or liquids & are encased in a protective carrying pouch for safety and portability. A large,
upright, LCD screen affords clear viewing, while a protective cap helps to reduce contamination. A silicone O-ring ensures tight
closure and thus ease of electrode module replacement.
These meter’s
We bring complete Electrochemistry Solutions for all your applications with a wide range of digital testing instruments. These instruments are designed and developed by professionals using advanced technologies in compliance with international standards.We have an extensive range of instruments for electrochemical measurements for a variety of applications including food, agriculture, wastewater treatment, industrial processes, environmental monitoring and research and development. All our instruments are factory calibrated and are ready to use out of the box. However, after prolonged usage, recalibration is recommended using a commercial standard solution.Get in touch with us for your requirements and let us bring our knowledge & experience in the field of testing, to help you solve your application needs.
Digital InstrumentsHandheld Meters
Product Range :
16
Digital InstrumentsDO Hand Held Meters
Our Multi-Parameter Meter is handheld, waterproof and dustproof that float if dropped in liquid.
Its compact design and technology help to measure pH, Conductivity, TDS, Salt and Temperature at
the same time. An important feature of the testers is a replaceable electrode within a reusable
tester body. The microprocessor-based meter gives accurate readings in fluctuating temperatures
and can be easily calibrated. These meters are cost effective and come encased in a protective
carrying pouch for safety and portability.
Our unique designed and engineered DO meters are handheld, waterproof and dustproof that float if dropped in liquid. Its compact design and technology helps to measure Dissolved Oxygen / Oxygen Percentage very effectively at the same time. Testing with portable oxygen meters determines whether or not you have optimal dissolved oxygen levels necessary for good water quality. For accurate results this test should be performed on site. Our handheld type advance microprocessor based, fast and accurate DO/O meter is 2
ideal for such applications. These meters are cost effective and come encased in a protective carrying pouch for safety and portability.
Multi-Parameter Hand Held MeterDigital Instruments
Features :Microprocessor based fast, reliable and accurate measurements.
Memory and Storage function.
Weatherproof Case and compact Design.
Large LCD display for reading convenience.
Product Range :
Product Range :
Model No AM-AL-01
Range (-)2.00 to 16.00 ± 1000 mV 0 to 100 mS/cm 0 to 66.0 ppt 0 to 50 ppt 0 to 110 Deg C
Resolution 0.01 pH 0.1 to 1 mV 0.1µS to 0.1mS 0.1PPM - 0.1PPT 0.1PPM-0.1PPT 0.1 Deg C
Accuracy ±1% ±1% ±2% ±2% ±2% 0.2 Deg C
Temp Yes
Compensation
Power AAA (1.5V) x 4 Batteries
Dimension 42 x 33 x 183 mm
Meter Weight 160 g
Parameter pH ORP Conductivity TDS Salt Temp.
Parameter DO O2 Temp
Model AM-DO-01
Range 0 to 20 mg/L 0 to 200% 0 to 90 Deg C
Accuracy ±0.2 + 1digit ± 2% FS ±0.2+1 digit
Resolution 0.01 0.1 0.1
ATC 0 to 50 Deg C
Power AAA - DC 1.5V x 4 Batteries
Dimensions 195 x 40 x 36 mm
Weight 135g
Features:Microprocessor based for fast and accurate measurements.
Large LCD display DO and Temperature readings simultaneously.
Simple to calibrate by one keyboard and ATC.
Memory with Data-hold and Max/Min and shows PTS after calibration.
Easy to replace the DO probe module.
17
Digital InstrumentsCalibration Solution
Product Code Details Quantity
AM-B5-ORP ORP / Redox Solution 475mv 500 ml
Product Code Details Quantity
AM-B5-C1 Conductivity Solution 1413µS/cm 500 ml
AM-B5-C2 Conductivity Solution 12.88mS/cm 500 ml
AM-B5-C3 Conductivity Solution 84µS/cm 500 ml
AM-B5-C4 Conductivity Solution 100µS/cm 500 ml
AM-B5-C5 Conductivity Solution 500µS/cm 500 ml
AM-B5-C6 Conductivity Solution 2764µS/cm 500 ml
AM-B5-C7 Conductivity Solution 5mS/cm 500 ml
AM-B5-C8 Conductivity Solution 111.8mS/cm 500 ml
Conductivity Standard Solution
Product Code Details Quantity
AM-B5-PH1 pH Solution 1.68 500 ml
AM-B5-PH4 pH Solution 4.01 500 ml
AM-B5-PH6 pH Solution 6.86 500 ml
AM-B5-PH7 pH Solution 7.00 500 ml
AM-B5-PH9 pH Solution 9.18 500 ml
AM-B5-PH10 pH Solution 10.00 500 ml
AM-B5-PH12 pH Solution 12.45 500 ml
pH Standard Solution
ORP Standard Solution
We offer a wide selection of calibration and buffer solutions. All our calibration and buffer solutions are bottled in our state-of-the-art solution facility and comply with National and International standards. These solutions are available in a convenient and economical 500ml bottle with certification.
Our range of portable Pen Type meters are economical range of easy to use and reliable hand held pen type meters. An important feature
of the testers is the compact single chamber design. The meter gives accurate readings with its Built-in temperature sensor and can be
easily calibrated.
Pen Type MetersDigital Instruments
Fast, Reliable and Accurate measurement
Compact Single Chamber Design
Built-in Temperature Sensor
Auto Shut Off Function to Enhance Battery Life
Hold Function for Ease of Read & Record
Easy Calibration
Available in a Portable Pouch
Features :
Parameter pH TDS & Conductivity (EC)
Model AM-P -PH AM-P-EC
Range 0 - 14 0 - 9990 PPM & 0 - 9990 µs/cm
Resolution 0.1 1/10 PPM
Power 1.5V x 2 Lithium Batteries LR44 1.5V x 2 Lithium Batteries LR44
Accuracy ± 2% (4 to 10), ± 5% (<4 & >10) ± 2% (0 to 2000), ± 5% (>2000)
Temperature 0 - 80 Deg C 0 - 80 Deg C
Dimension 35 mm x 155 mm 35 mm x 155 mm
Weight 55g 55g
18
Digital Instruments
Portable Meters
To make on site testing easy and simple we have a specially designed portable meter which enables a user to analyse different
water parameters on site with higher accuracy. The meter is supplied in a hard plastic case with all the accessories which are
required to carry out test on site. These meters have a weatherproof case and are ultra light to carry on site. They are provided
with large LCD display and advance memory storage functionalities.
Parameter Free / Total Chorine Turbidity
Range 0 to 5.00 ppm 1000 NTU
Resolution 0.01 ppm 0.01 to 1 NTU
± 0.03 + 1 digit at < 2 ppm ± 3% of reading + 1 digit at < 500 NTUAccuracy
± 3% FS + 1 digit at > 2 ppm ± 5% of reading + 1 digit at > 500 NTU
Response <5 seconds <10 seconds
Reagent FC1(250 Tests) AUTO Calibration - Standards are provided with the meter
TC1(250 Tests) (0, 20, 100, 800 NTU)
Sample 10 ml
Power AAA - DC 1.5V x 4 Batteries
Dimension 70 x 135 x 65 mm
Meter Weight 168 g
Model AP-CL-01 AP-TB-01
Product Range :
Features :Microprocessor based fast, reliable and accurate measurements.
Spectrophotometric Method for Detailed Analysis.
Reagents & Standards Based on International Methods.
No Operational Cost for Turbidity Meters.
Low Cost Chlorine Reagents.
Weatherproof Hard Case and Compact Design.
Large LCD display for reading convenience.
Memory and Storage function.
Turbidity Meter
Free and Total Chlorine Meter
Digital Instruments
Bench Top Meters
For detailed analyses for parameters like pH, TDS, Conductivity, and Dissolved Oxygen in industries we have specially developed
reliable, accurate and robust meters. These meters are available with a built in stirrer which enhances the measuring
performance and provides accurate readings. Majority of the meters have multi parameter option i.e. same meter can analyse
different parameters by just adding an electrode. All meters are advance microprocessor based with rugged housing & splash
proof keyboard.
Features :Advance Microprocessor based with rugged housing & splash proof keyboard.
Built-in Stirrer function platform with electrode holder for convenience.
Large LCD display for multi parameter display simultaneously.
Built in ATC (Automatic Temperate Compensation).
Advance Storage / Memory function with USB Connectivity.
Product Range :Parameter pH ORP Conductivity TDS Salt DO O2 Temp
Model Parameters
Range (-) 2.00 to 16.00 ± 1999 mV 0 to 100.0 mS/cm 0 to 66.0 ppt 0 to 50.0 ppt 0 to 20.00 mg/L 0 to 200.0 % 0 to 110 Deg C
Accuracy ±0.01 + 1 Digit ±0.2 + 1 Digit ±2% FS ±2% FS ±2% FS ±0.2 + 1 Digit ±2% FS ±0.2 + 1 Digit
Resolution 0.01 pH 1/0.1/1 mV 0.1 to 1 µS/cm 0.1 to 1 ppm 0.1 to 1 ppm 0.01 mg/L 0.10% 0.1 Deg C
Compensation 0 to 100 Deg C N/A 0 to 60 Deg C 0 to 60 Deg C 0 to 60 Deg C 0 to 60 Deg C NA NA
AB-PH-01
AB-TDS-01
AB-DO-01
20
Digital Instruments
Online Meters
Monitoring of PH / ORP / TDS / Conductivity is commonly required in a wide variety of industries ranging from water, chemical,
pharmaceutical, food processing etc. So our online range of meters helps to monitor the process PH / ORP / TDS / Conductivity
/Temperature on continuous basis. These reliable, accurate and robust meters are designed with a compact housing which fits
in standard industry panel with 1/16 DIN fitting. Also these meters can be easily calibrated and can display multiple
parameters at the same time.
Microprocessor based for fast and accurate measurements.
Weatherproof Case and compact Design.
1/16 DIN fitting on the standard industry panel
Large Backlight LCD Display
Easy to Calibrate by one keyboard & Degree C/F are switchable.
Features :
Parameter pH ORP Temperature
Parameter TDS Conductivity Temperature
Online pH / ORP Meter
Online TDS / Conductivity Meter
Model No AO-PH-01
Range (-) 2.00 to 16.00 (-) 1000 to (-) 1000 mV 0 to 90 Deg C
Accuracy ±0.01 ±2 ±0.2
Resolution 0.01 PH 1mV 0.1 Deg C
Power 9V DC (2 Pin 230VAC Adaper Provided)
Dimensions 45mm x 45mm x 110mm, Mounting Details : 1/16 DIN Panel Mount (Cut out Size : 45 x 45 mm) (Depth : 110 mm)
Meter Weight 75g
Sensor* Model : PH Industrial Electrode, Code : AME-PH-IGT, Qty : 1.(Included) Specs : Process Connection : 3/4", Temp I/P : 30K Thermister, Material : Glass Sensor with PVC Housing.
Dimensions : 28 x 165 mm, Lenght : 5M, Temperature Range : Upto 90 Deg C
Model No AO-TDS-01
Range 0 to 13.00 PPT 0 to 20 mS/cm 0 to 90 Deg C
Accuracy ±2% of FS ±2% of FS ±0.2+ 1 Digit
Resolution 1ppm 1 µS/cm 0.1 Deg C
Power 9V DC (2 Pin 230VAC Adaper Provided)
Dimensions 45mm x 45mm x 110mm, Mounting Details: 1/16 DIN Panel Mount (Cut out Size : 45 x 45 mm)(Depth: 110 mm)
Meter Weight 75g
Sensor* Model : Conductivity Industrial Electrode, Code : AME-CN-IGT, Qty : 1(By Defualt) Specs : Process Connection: 3/4"", Temp I/P: 30K Thermister, Material : Glass Sensor with PVC Housing.
Dimensions: 28 x 165 mm, Lenght : 5M, Temperature Range : Upto 90 Deg C
*Note: Sensor model depends on system requirements. Confrim for suitable sensor model with sales person before ordering.
*Note: Sensor model depends on system requirements. Confrim for suitable sensor model with sales person before ordering.
21
Digital Instruments
ControllerPH / ORP / TDS / Conductivity are the primary controlling parameters for any process used in a wide variety of industries ranging
from water, chemical, pharmaceutical, food processing etc. Our online controllers are used to monitors these process
parameters continuously and helps to take corrective action with its relay & current outputs. These reliable, accurate and robust
meters are designed with a compact housing which fits in standard industry panel. Also these meters can be easily calibrated
and can display multiple parameters at the same time.
Features :Microprocessor based for fast and accurate measurements.Weatherproof Case and Compact Design (IP 54)Programmable Relay & 4 to 20mA Outputs with user defined HysteresisProgrammable High & Low Alarm functions1/4 DIN Fitting on the Standard Industry PanelGalvanic separation between Input, Output & SupplyAuto Buffer Adjustment with Automatic Temperature Compensation
Parameter TDS Condutivity Temperature
Model No AOC-TDS-01Range 0 to 10000 PPM 0 to 100mS/cm 0 to 100 Deg CAccuracy ±0.01 ± 1 mv ±0.2 Deg CResolution 1 PPM 0.01 µS/cm - 1mS/cm 0.1 Deg CATC YesRelay Output 2 Programmable Relay Outputs (Max: 250V/10A) With User
Defined Range Adjustment
Current Output 4 to 20 mA Isolated DC Output (Max Load : 750 W)Power Supply 220 VAC @ 50 Hz 220 VAC @ 50 HzDimensions 96 × 96 × 110 mm Size: 96 × 96 × 110 mm,
Mounting Details: 1/4 DIN Panel Mount (Cut out Size : 92 x 92 mm) (Depth: 110 mm)
Weight 500 GmsSensor* Model : Conductivity Industrial Electrode, Code: AME-CN-IGP, (By Defualt) Specs : Process Connection: 3/4”, Temp I/P : PT 100
Material : Glass Sensor with PVC Housing. Dimensions : 28 x 165 mm, Lenght : 5M,Temperature Range : Upto 90 Deg C
Online TDS/conductivity Controller
Parameter PH ORP Temperature
Model No AOC-PH-01 Range 0 to 14.00 (-)2000 to (+)2000 mV 0 to 100 Deg CAccuracy ±0.01 ± 1 mv ±0.2 Deg CResolution 0.01 PH 1 mv 0.1 Deg CATC Yes Automatic / Manual (0 to 100 Deg C)Relay Output 2 Programmable Relay Outputs (Max: 250V/10A) With User
Defined Range AdjustmentCurrent Output Isolated DC 4 to 20 mA Output 4 to 20 mA Isolated DC Output
(Max Load : 750 Ώ)Power Supply 220 VAC @ 50 HzDimensions Size: 96 × 96 × 110 mm, Mounting Details: 1/4 DIN Panel
Mount (Cut out Size : 92 x 92 mm) (Depth: 110 mm)Weight 500 GmsSensor* Model: pH Industrial Electrode, Code: AME-PH-IGP, Qty: 1(By Defualt)" Specs : Process Connection: 3/4”, Temp I/P: PT 100,
Material : Glass Sensor with PVC Housing. Dimensions : 28 x 165 mm, Lenght: 5M, Temperature Range: Upto 90 Deg C
Online pH / ORP Controller
22
Digital Instruments
ElectrodesMeasurement accuracy for parameters like pH, TDS, Conductivity, ORP etc. depends on quality and specification of the instruments you use. Our extensive range of supreme quality electrodes and sensors are designed to make your onsite or lab measurements easy, reliable, and accurate. We have complete range of electrodes for parameters like pH, TDS, Conductivity, ORP etc. available in a variety of body materials and body styles to suit majority of Industrial or Laboratory applications.
We understand the need for continuous monitoring of parameters like pH, TDS, Conductivity, ORP etc in major industries, thus we provide an economical, accurate and reliable industrial electrodes. These electrodes are specially designed for online monitoring and they are compatible with all the major Indicators & Controllers.
Industrial Electrode
Features :Advanced Protective Case DesignBuilt In Temperature SensorSealed Double Junction Reference.High Performance Thermoplastic Body (PVC/Teflon)Convenient installation in form of flow-through or immersion
pH Industrial Electrode
Model AME-PH-IG AME-PH-IGP AME-PH-IGT
Range 0 to 14 0 to 14 0 to 14
Built -in Temp. Sensor No PT 100 30K Thermistor
Operating Temperature Upto 100 Deg C Upto 100Deg C Upto 100Deg C
Body Material PVC PVC PVC
Process Connection 3/4" 3/4" 3/4"
Meter Connection BNC BNC BNC
Dimensions (D x H) mm 28 x 165 28 x 165 28 x 165
Cable Length 5M 5M 5M
Parameter pH
Model AME-CN-IG AME-CN-IGP AME-CN-IGT AME-CN-OS AME-CN-OSP AME-CN-OST
Cell Constant 'K' K = 1 K = 1 K = 1 K = 1 K = 1 K = 1
Built -in Temp. Sensor No PT 100 30K Thermistor No PT 100 30K Thermistor
Operating Temperature Upto 100 Deg C Upto 100Deg C Upto 100Deg C Upto 100 Deg C Upto 100Deg C Upto 100Deg C
Body Material PVC PVC PVC SS SS SS
Process Connection 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"
Meter Connection BNC BNC BNC BNC BNC BNC
Dimensions (D x H) mm 28 x 165 28 x 165 28 x 165 30 x 70 30 x 70 30 x 70
Cable Length 5M 5M 5M 5M 5M 5M
Parameter Conductivity
Conductivity TDS Industrial Electrode
ORP Industrial ElectrodeParameter ORP
Model AME-OR-IG AME-OR-IGP AME-OR-IGT
Range ± 2000 mv ± 2000 mv ± 2000 mv
Built -in Temp. Sensor NA PT 100 30K Thermistor
Operating Temperature Upto 100 Deg C Upto 100Deg C Upto 100Deg C
Body Material PVC PVC PVC
Process Connection 3/4" 3/4" 3/4"
Meter Connection BNC BNC BNC
Dimensions (D x H) mm 28 x 165 28 x 165 28 x 165
Cable Length 5M 5M 5M
23
Measurement of parameters like pH, TDS, Conductivity, ORP etc in laboratory are regularly performed in major industries, thus we provide an economical, accurate and reliable Laboratory electrodes. These electrodes are specially designed with high performance plastic body for precise measurement and they are compatible with all the major meters and Indicators. These electrodes can also be installed on measured surface or devices using a unique designed ½” NPT connector available with us.
Features :Low maintenance, non-refillable, economical Built In Temperature SensorHigh Performance Plastic Body Convenient installation using ½” NPT connector.
Laboratory ElectrodeDigital Instruments
pH Laboratory Electrode
Model AME-PH-LE AME-PH-LEP AME-PH-LET AME-PH-LG AME-PH-LGP AME-PH-LGT
Range 0 to 14 0 to 14 0 to 14 0 to 14 0 to 14 0 to 14
Built -in Temp. Sensor No PT 100 30K Thermistor No PT 100 30K Thermistor
Operating Temperature Upto 70 Deg C Upto 70 Deg C Upto 70 Deg C Upto 90 Deg C Upto 90 Deg C Upto 90 Deg C
Body Material Plastic Plastic Plastic Glass Glass Glass
Process Connection Laboratory Laboratory Laboratory Laboratory Laboratory Laboratory
Meter Connection BNC BNC BNC BNC BNC BNC
Dimensions (D x H) mm 12 x 120 12 x 120 12 x 120 12 x 120 12 x 120 12 x 120
Cable Length 1M 1M 1M 1M 1M 1M
Parameter pH
Model AME-CN-LE AME-CN-LEP AME-CN-LET AME-CN-LG AME-CN-LGP AME-CN-LGT
Cell Constant 'K' K = 1 K = 1 K = 1 K = 1 K = 1 K = 1
Built -in Temp. Sensor No PT 100 30K Thermistor No PT 100 Thermistor
Operating Temperature Upto 70 Deg C Upto 70 Deg C Upto 70 Deg C Upto 90 Deg C Upto 90 Deg C Upto 90 Deg C
Body Material Plastic Plastic Plastic Glass Glass Glass
Process Connection Laboratory Laboratory Laboratory Laboratory Laboratory Laboratory
Meter Connection BNC BNC BNC BNC BNC BNC
Dimensions (D x H) mm 12 x 120 12 x 120 12 x 120 12 x 120 12 x 120 12 x 120
Cable Length 1M 1M 1M 1M 1M 1M
Parameter Conductivity
Conductivity TDS Laboratory Electrode
ORP Industrial ElectrodeParameter ORP
Model AME-OR-LE AME-OR-LG
Range ± 2000 mv ± 2000 mv
Built -in Temp. Sensor No No
Operating Temperature Upto 70 Deg C Upto 90 Deg C
Body Material Plastic Glass
Process Connection Laboratory Laboratory
Meter Connection BNC BNC
Dimensions (D x H) mm 12 x 120 12 x 120
Cable Length 1M 1M
Performance of a R.O. system gets hampered due to impurities that build up on the membrane surface during operations. Suspended solids, microorganisms and mineral scale can foul membrane elements. These deposits can cause loss in output and/or rejection levels and reduce total system performance. Our formulations based on modern polymers help to greatly reduce deposits, impurities, and scale in your system's membranes. Our extensive range of formulated Antiscalants, Antifoulants and Cleaners are specially designed chemicals that keep these contaminants from attaching to the membrane surface. They also prove economical in the long run.
We have in our repertoire a basket full of Water Treatment Chemical Formulations, manufactured to
international quality standards for various applications. Our high performance chemical treatment
products are used successfully in many of the industrial process environments where they help to reduce
cost by improving the productivity & optimizing performance. Our range of formulations include water
treatment chemicals for the following systems.
REVERSE OSMOSIS CHEMICALS
R.O. ANTISCALANTWe have developed a range of easy to handle, cost effective RO Antiscalants which increase the solubility of the hardness salts so they remain in solution rather than forming scale on membranes. Our polymer based RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron.
Sr Product Code Product Description
1 WT - RD300 For Moderate TDS & Moderate Silica
2 WT - RD310 For Moderate TDS & High Silica
3 WT - RD320 For High TDS & High Silica
4 WT - RD340 For Very High Hardness & High Silica
5 WT - RD301 For Moderate TDS & Silica (High Alkalinity)
Sr Product Code Product Description
1 WT - ROC1600 Acidic Cleaner
R O ACIDIC CLEANEROur Acidic Cleaner is highly effective multipurpose cleaning chemical which very effectively removes deposits including carbonate, silicate, sulphate, phosphate of Calcium, Barium, Strontium and Iron scales.
Sr Product Code Product Description
1 WT - ROC1800 Alkaline Cleaner
R O ALKALINE CLEANERR O Alkaline Cleaner is highly effective in removing deposits including colloids and organic biofoulants. It is a combination of Alkaline cleaner and a novel surfactant.
BIOFOULING CLEANER
Our Isothiazoline based non-oxidizing micro biocide is highly effective against all type of biofilms including sessile & planktonic organisms. It helps to cleans organic debris and biofilm & keeps the membrane surface free from Biofouling. Its Broad spectrum efficacy makes it compatible with tap water, brackish water, sea water & other chlorine resistance membranes.
Our Range of Formulations :
Sr Product Code Product Description
1 WT - ROB900 Biofouling Cleaner
R.O. CLEANERRegular chemical cleaning of RO membranes will help to increase its performance and will extend its useful life. Cleaning should be undertaken whenever the permeate flux, differential pressure or conductivity changes to undesirable values. However it is better to clean the membrane regularly after a predetermined interval. Each type of fouling requires a different cleaning strategy depending on the water supply. Membrane fouling may be inorganic, organic, microbiological or a combination.
26
SCALE and CORROSION INHIBITORS (CARBONATE, SULPHATE & SILICA INHIBITOR).
COOLING WATER FORMULATIONS
Sr Product Code Product Description
1 WT - CR100 For Closed System (Chilling Plants)
2 WT - CR200 (P*) For Closed System (Chilling Plants)
MULTIPURPOSE : SCALE, CORROSION INHIBITOR AND DISPERSANTSOur multipurpose organic corrosion and scale inhibitor is designed for use in industrial cooling systems. It is composed of ingredients that are biodegradable and contains no zinc or heavy metal components. It functions by forming a microscopic inhibitive film on the metal surface that acts as a barrier to prevent or minimize corrosion. It also contains effective polymeric antifoulants and sequestrants to help remove metallic oxide, silt and dead microbiological material to maintain a cleaner and more efficiently operating system.
Our Range of Formulations :
Industrial cooling systems are required to function smoothly. Therefore it is essential that correct cooling water conditions are established and maintained at all times. To ensure cooling systems are correctly maintained and operate at optimum efficiency it is essential to carefully select cooling water treatment chemicals. Our comprehensive range of high performance cooling water treatment chemicals have been scientifically formulated to deliver significant operational benefits and performance improvements to cooling systems that use water as a primary coolant. Our wide range of formulations help to minimize scale, corrosion, fouling and biofouling to ensure trouble free operation of the system.
Sr Product Code Product Description
1 WT - 2000 For Low TDS System
2 WT - 2870 For High TDS System
3 WT - 2890 For High Corrosive System
Our technologically advanced cooling water scale and corrosion inhibitors have been scientifically formulated to protect cooling systems from the effects of both scale build-up and metallic corrosion in a single product. Our scale and corrosion inhibitors deliver improved performance, helping to reduce maintenance costs, improve reliability and optimise operational efficiency.
Sr Product Code Product Description
1 WT - D100 For Low TDS System
2 WT - D200 For High TDS System
The detrimental impact of metallic corrosion can be a significant issue that affects the operation and maintenance of open and closed cooling water systems. To ensure that such closed cooling systems are well maintained and operate at optimum efficiency it is essential that the correct water conditions are maintained at all times. This can be achieved using carefully selected corrosion inhibitors designed specifically for cooling systems. Our advanced technology cooling water corrosion inhibitors have been scientifically formulated to protect cooling systems from the effects of metallic corrosion. Our high performance corrosion inhibitors deliver improved system performance, helping to reduce maintenance costs, improve reliability and optimise operational efficiency.
CORROSION INHIBITORS
Sr Product Code Product Description
1 WT - P200 To increase in RO Water (Post Treatment)
Our Isothiazoline based non-oxidizing micro biocide is highly effective against all type of biofilm including sessile & planktonic organisms. It helps to cleans organic debris and biofilm & keeps the membrane surface free from biofouling. Its Broad spectrum efficacy makes it compatible with tap water, brackish water, sea water & other chlorine resistance membranes.
R O SYSTEM PH BOOSTER
27
Sr Product Code Product Description
1 WT - A100 Organic Anti-Foulant
Sr Product Code Product Description
1 WT - 1153A Closed System Chemical De-Scalant & PolymericDispersant (Should be used in combination)2 WT - 1153B
3 WT - IC305 Open System Chemical De-Scalant & PolymericDispersant (Should be used in combination)4 WT - IC315
Sr Product Code Product Description
1 WT - A200 To Prevent Biofouling in the Large System
2 WT - A201 To Prevent Biofouling in the Small System
Our polymeric dispersant is a synthetic organic anti foulant which inhibits the deposition of fouling materials on the heat transfer surfaces. It eliminates fouling caused by phosphates, silicates, metallic oxides, silt and other air-borne materials. Thus it keeps surfaces clean, maintains a high rate of heat transfer and aids the formation of corrosion inhibitor film.
POLYMERIC DISPERSANTS
ON LINE CLEANER
Our cleaning system has been specially developed to effectively remove deposit, sludge / foulants from the system. It is a blend of specific chelating agents designed for removal of Iron, Calcium and Magnesium based deposits from cooling water systems where it is not practical to remove the tower packing. It is found to be most effective in cleaning, where deposition or oil contamination is suspected of reducing heat transfer or restricting flow available. Deposits are softened and solubilized as our cleaner penetrates the deposits and enhances the action of cooling water dispersants to slough off remaining deposits which are later removed during a blow down or draining.
BIOCIDES Our biocides are effective in controlling bacterial slime and fungal growth in industrial recirculating cooling water systems, air washer systems and evaporate condensers. We have a range of both oxidizing and nonoxidizing biocides, which have a broad spectrum efficacy and are effective over a wide range of pH.
BIODISPERSANTOur synthetic organic Biodispersant is effective in removing dead algal and slime mass from cooling system. It has a capacity to penetrate inside the thick algae mats on the cooling tower deck or fills and help the biocide to penetrate the biomass. It also has a deterrent effect and it cleans the system on line.
Sr Product Code Product Description
1 WT - B101 Quaternary Ammonium Based
2 WT - B201 Carbamate Based
3 WT - B660 Chlorine Based
Sr Product Code Product Description
4 WT - B700 Nano Silver & Hydrogen Peroxide Based
5 WT - B900 Isothiazoline Based
28
Sr Product Code Product Description
1 WT - 2110 Low TDS Boiler System
2 WT - 2120 Moderate TDS Boiler System
Our boiler sludge conditioner is designed to combat the accumulation and build-up of boiler sludge as it represents a modern concept in the chemical treatment, making it superior to many older natural organic treatments. It can withstand high temperature and pressure conditions (up to 100 kg/cm2) and does not impart taste or odour to steam. These characteristics make it commendable for usage even where steam is likely to come in contact with edible products. It also has the additional feature of minimizing iron oxide deposition by reducing ferric oxides to the more desirable black oxide magnetite, thus it is effective in removing oil traces in the boiler.
SLUDGE CONDITIONERS
Sr Product Code Product Description
1 WT - 3010 Sulphite Based
2 WT - 3030 Hydrazine Based
Our specially formulated oxygen scavenger helps in rapid and complete removal of dissolved oxygen form feed water and boiler water. It is an instant oxygen scavenger & normal reaction time with oxygen is only 15 to 20 second at ambient temperatures.
OXYGEN SCAVENGER
Primary function of a boiler is to transfer heat into water until it becomes hot or turns to steam. Boiler feed water often contains impurities, which impair boiler operation and efficiency.
Our comprehensive range of high performance formulations have been scientifically formulated to deliver significant operational benefits and performance improvements. Our extensive range of formulated boiler water treatment chemicals help to minimize scale formation, metallic corrosion and sludge deposition. This helps to increase efficiency, reduce fuel consumption, decrease operating and maintenance costs and extend equipment life.
BOILER WATER FORMULATIONS
Our multipurpose boiler water treatment chemicals have been designed to offer multi-component boiler protection in a single chemical product. It is a special product designed to prevent scale and corrosion on the waterside surfaces of medium-and-low pressure boilers using unsoftened feed water. It is a combination of modern water treatment chemicals comprising of chemical softening agents, sludge conditioners and oxygen scavenger which protect the feed lines and the boiler from scale and corrosion. This brings convenience of using a single chemical treatment product, with multifunctional protection capabilities to deliver all-round boiler protection.
MULTIPURPOSE - SCALE, CORROSION INHIBITOR & SLUDGE CONDITIONER
Our Range of Formulations:
Sr Product Code Product Description
1 WT - 1010 For Fire Tube Boiler
2 WT - 1020 For Coil Tube Boiler
Our unique formulation is an all-in-one precise blend of alkalinity builder, softening agent and synthetic organic sludge conditioner. It helps to protect your boiler system from acidic corrosion as it is designed specifically for low hardness softened water and demineralized Water.
ALKALINITY BUILDER
Sr Product Code Product Description
1 WT - 1462 For Very Low Hardness Water and DM Water
29
A cane sugar mill converts sugar cane to sugar crystals using a chain of continuous processes like crushing, evaporating, filtering & distillation. To maximize sugar recovery from each of these processes different sugar process chemicals are used for individual production processes. Our comprehensive range of high performance chemicals have been scientifically formulated to deliver significant operational benefits and economize the production process. Use of these chemicals helps the sugar process unit for a trouble free run and achieving maximum recovery of sugar from cane.
CANE SUGAR PROCESS FORMULATIONS
Our formulation is a synergistic blend of Biocides which sanitises the mill section & restricts
the inversion of sugar in the sugar juice. It has a highly effective micro biocide formulation
forming electrostatic bonds with carboxyl group in protein and enzymes that interfere with
oxidation reduction and other biochemical reactions. Also the chelating agent combines with
the metal ions in the enzymes essential in the metabolism of microorganisms & restrict their
growth.
MILL SANITATION COMPOUND TO CONTROL BACTERIAL GROWTH
Our Range of Formulations :
Sr Product Code Product Description
1 WT - 8100 Quaternary Ammonium Based
2 WT - 8200 Carbamate Based
SOFTENING AGENTOur softening agents treat incoming boiler water hardness by sequestering both calcium and magnesium from the feed water preventing its premature deposition & scale formation. We recommend its use with sludge conditioners and dispersants, antifoam and oxygen scavengers to provide more effective treatment.
Sr Product Code Product Description
1 WT - 4010 Phosphate Based
2 WT - 4020 (P*) Neutral Phosphate Based
3 WT - 4040 (P*) Alkaline Phosphate Based
NEUTRALIZING AMINEOur formulation is a blend of volatile product for steam condensate treatment that provides the direct neutralization of carbon dioxide and ensures positive corrosion protection. It is formulated to provide an ideal vapour-liquid distribution ratio, to protect all parts of the steam/condensate system with the minimal product loss.
Sr Product Code Product Description
1 WT - R101 For Condensate System
30
BAGASSE POL REDUCER
Our unique formulation with its synergistic functions helps in achieving maximum extraction of additional sucrose from bagasse on line. This additional sugar recovered from waste bagasse adds to the savings for the sugar mills while increasing output efficiency.
BAGASSE SOLID FUEL ADDITIVE
Our Bagasse Fuel Additive is a free flowing powder designed primarily for treating Bagasse
fuel used in sugar industry. It acts as combustion catalyst resulting in improved
combustion efficiency. It has an anti–fouling agent that helps to keep heat transfer
surfaces clean improving steam generation. It softens the hard clinker while preventing
hard clinker formation, thus reducing boiler maintenance, provide ease in cleaning and
increase boiler availability for long term operation. It promotes smoke free combustion at
lower excess air levels, resulting in improved fuel economy.
Sr Product Code Product Description
1 WT - 8500 To Extract More Sugar From Bagasse
Sr Product Code Product Description
1 WT - 8600(P*) For Complete Combustion of Bagasse
'C' massecuite consists mainly of highly viscous non sugar material and a low sugar. The non
sugar in 'C' massecuite increases the viscosity and hampers the pan boiling. Our
formulation is a synergistic blend of special chemicals that reduces the viscosity of 'C'
massecuite at the time of pan boiling.
VISCOSITY REDUCER
Sr Product Code Product Description
1 WT - 8400 To Reduce Viscosity Of ‘C’ Massecuite
Sr Product Code Product Description
1 WT - 8300 To Inhibit Carbonate, Sulphate And Silica
Our formulation is a blend of low molecular weight polymers which helps in protecting the
quadruple evaporators from scaling & deposits in multiple ways. It is very effective for
Carbonate, phosphate, sulphate, silicate deposits and it maintains a consistency in the Brixs of
sugar juice in respective evaporator bodies.It thus helps retarding the scale formation in the
evaporator and improves heat transfer by increasing the solubility of dissolved salts reducing
evaporator cleaning frequency.
EVAPORATOR ANTISCALANT
2531
We are consultants to the water industry, wherein we help industries in specialized testing of various water parameters, again both in chemistry as well as microbiology. Also our customized chemical treatment products are used successfully in many of the industrial process environments where they help to reduce cost by improving the productivity & optimizing performance. Our Research and development is an ongoing process for innovating new treatment techniques aimed towards complete satisfaction to the client. Our Industrial Chemicals are formulated with discretion and caution so as to make their properties as environment friendly as possible. Our dedicated workforce is imbibed with the same passion in humane approach and our highly advanced infra structural set-up helps us in our mission to deliver high quality products.
Sr Product Code Product Description
1 WT - D10 Drinking Water Pipelines
DEFOAMERWe provide a complete range of defoamers for different industries such as Adhesive, Agriculture, and Bitumen, Construction, Dyes & Pigments, Emulsion polymerization, Oilfield & petroleum, Paper & Pulp Sugar, Soaps & Detergents, Waste water Treatment. Our Silicon based defoamer is found to be powerful and highly effective due to its unique properties & can be used in practically all industrial applications where unwanted foam creates problems in manufacturing.
Ion exchange resins can become polluted or contaminated with suspended solids, slime, bacteria, and numerous organic or microbiological matters over a time period. Fouling of the resin by iron and organic build up cannot be removed by normal regeneration procedures and can cause gradual performance losses. Our resin cleaner is especially designed to remove bound iron from iron fouled resins and prevent accumulation of fouling conditions to extend the resin life significantly. It will ensure optimum exchange capacity & also keep the softener components clean when used on a regular basis.
RESIN CLEANER
Sr Product Code Product Description
1 WT - AF10 Silicon Based Defoaming Agent
Sr Product Code Product Description
1 WT - Resclean For Ion Exchange Resin
AHU if not cleaned regularly & properly lose their cooling efficiency & consume more electricity which drastically reduces its efficiency. To prevent this problem it is important to clean the AHU regularly. An effective cleaner would keep the AHU, free of muck and dust & running efficiently, thereby keeping the electricity consumption low. Our inhibited alkaline cleaner is useful in cleaning of Air Handling Units (AHU), Aluminium piston and Radiators. Also it has exceptionally long tank life and does not produce any objectionable odour, so it can be used for heavy duty cleaning at a economical price.
AHU (Air Handling Unit) CLEANER
SPECIALITY CHEMICALSWe have a wide range of specialty chemical designed for specific cleaning processes.
Sr Product Code Product Description
1 WT - AHU CLN For Aluminium Cleaning
Corrosion within the pipe work used to transport potable water can lead to several problems like discolouration of water/fittings, increase the level of iron & copper in water & cause leakages in pipes. Our formulation is designed for control of calcium and magnesium deposits, sequestration of dissolved iron & magnesium and control corrosion. It helps in control of Iron and manganese in the well water system.
POTABLE WATER TREATMENT
32
The primary aim of combustion is to obtain maximum amount of steam from each unit of fuel. But impurities in fuels and operational problems are limitations to achieve maximum output from burned fuel. The impurities in fuel can lead to formation of slag in boiler furnace, clinkers on the fuel bed and the presence of sulphur can lead to the cold end corrosion.
A fireside additive plays an important role in complete combustion of fuel along with a control on corrosion deposits, slagging clinker formation, reduction in air borne pollution emission as well as inhibition of fouling.
FIRESIDE ADDITIVES
Sr. Product Code Product Description
1 AGN - 6100 (P*) For Wood, Coal Bagasee Etc.
Combustion Process without Additives
Incomplete Combustion of fuel
Slag & Clinker Formation
Corrosion of surface & Cold Corrosion
Acid Smut Formation
Unburned Carbon in Ash
Increase Fuel Consumption
Decrease in Furnace Efficiency
Increases Particulate Matter from Stack
Combustion Process with Additives
Complete Combustion of Fuel
Reduced Slag & Clinker Formation
Minimizes Corrosion & Cold Corrosion
Reduces Acid Smut Formation
Decrease in Unburned Carbon in Ash
Reduces Fuel Consumption
Increase in Furnace Efficiency
Decreases Particulate Matter from Stack
ADVANTAGES OF USING FIRESIDE ADDITIVES
Our Range of Formulations :
FURNACE POST TREATMENT COMPOUNDOur Furnace Post Treatment compound is a perfect blend of combustion aid chemicals in the form of tube canister for fire side cleaning of furnace. It also comprises of combustion catalyst, oxidizing chemicals, dispersants and corrosion inhibitors. It is available in small packets to simplify the dosing process for a boiler. Therefore the cleaning of furnace wall improves the heat transfer and boiler efficiency with minimum breakdown.
Sr. Product Code Product Description
1 AGN - 6090 (P*) For Furnace Cleaning
Our Multipurpose Solid Fuel Additive is a free flowing powder designed primarily for treating coal, wood and other solid fuels. It acts as combustion catalyst resulting in improved combustion efficiency. It has an anti–fouling agent that helps to keep heat transfer surfaces clean thus improving the steam generation. It softens the hard clinker, while preventing hard clinker formation. Therefore helps in reducing the boiler maintenance, provide ease in cleaning and increases the boiler availability for long term operation. It promotes smoke free combustion, resulting in improved fuel economy.
MULTIPURPOSE SOLID FUEL ADDITIVE