ramset product guide 2011 v1

Product Guide

2011/V1

3 - 113

4

8

9

11

12 - 2112

13

14

15

17

18

20

21

21 - 3221

22

24

29

29

33 - 34

35 - 3735

35

36

37

38 - 4138

38

39

39

40

41 - 4441

42

42

43

43 - 44

43 - 44

45 - 4845

46

47

47

48

48

Reid™ Concreters and Builders Accessories

• Cement Sheet

Pipe Support and Fire Protection Systems

• Chipboard

• Plasterboard

• Cabinet

• Sealants

• Packers

• FomoFill™ Expanding Foams

• Concrete Repair and Additives

• Cementitious and Epoxy Grouts

Construction Chemicals

• Adhesives

• Fire Protection of Pipe Penetrations

• Channel Profiles, Supports and Accessories

• Pipe Clamps and Accessories

• AnkaScrew™ Suspension System

• Anchoring Packs (Heavy Duty)

Direct Fixing Tools and Accessories

Power Tools and Accessories

Mechanical Anchoring

Chemical Anchoring

Self Drilling Screws

• ChemSet™ Injection

• ChemSet™ Capsules

• ChemSet™ Studs

• Applicators and Accessories

• Powder Actuated Tools

• Drive Pins and Powerloads

• Gas Technology Tools

• Electrical & Plumbing Contractor Fixing Packs

• 18V Cordless Range

• Chisels

• Screwdrivers and Drilldrivers

• Concrete Nails

• Gas Pins and Fuel Cells

• Heavy Duty Anchors

• DynaDrill™ Range

• Medium Duty Anchors

• Laser Range

• Allthread Rod and Accessories

• Metal

• Electrical Support Fixings

• Driver Bits & Accessories Range

• Carbide

• Diamond

• Light Duty Anchors

Effective from December 31, 2010. 2

1300 780 063www.ramset.com.au

RAMSETTM

POWDER ACTUATED FIXING TOOLS PG 0100

Item Code Description Pack Qty

JOBMASTER 1

TS750P 1

TYMASTER 1

FORMMASTER 1

ROCKET 1

FRAMEBOSS 1

POWDER ACTUATED TOOL ACCESSORIES PG 0160


JobMasterTM

PA28113 1

PA28235 1

PA28230 1

PA310000 1

FrameMasterTM

(TS750P)

PA27833 1

PA27432 1

PA27831 1

PA27580 1

TyMasterTM

653116 1

PAT1085 1

653021 1

653106 1

653035 1

PA655901 1

PA655902 1

PA655903 1

FormMasterTM

PA28811 1

PA312860 1

PA28816 1

PA310000 1

Rocket

A1010 Piston Kit - Rocket 1

A1130A 1

A1049A 1

Piston Kit High Power - FrameMaster (TS750P)

Fastener Guide Assembly - FrameMaster (TS750P)

Spall Shield - FrameMaster (TS750P)

Spall Shield - FormMaster

Extension Pole - TyMaster

Pole Connector - TyMaster

Pole Round Connector - TyMaster

Piston Kit - FormMaster

Buffer (x5) - FormMaster

Buffer (x5) - JobMaster

Buffer (x3) - TyMaster

Fastener Guide Assembly - TyMaster

Spall Shield - TyMaster

Fastener Guide Assembly - JobMaster

Spall Shield - JobMaster

Piston Kit Standard - FrameMaster (TS750P)

Buffer Assembly (x5) - Rocket

Fastener Guide Assembly - Rocket

Fastener Guide Assembly - FormMaster

DIRECT FIXING TOOLS AND ACCESSORIES

Piston Kit High Power - TyMaster

Piston Kit Standard - TyMaster

JobMasterTM

- General Purpose Tool

FrameMasterTM

- Proven Framing Tool

TyMasterTM

- Dedicated Overhead Tool

FormMasterTM

- High Powered Tool For Formworkers

Rocket - Automatic Short Pin Tool

FrameBossTM

- Fully Automatic Magazine Tool

Piston Kit - JobMaster



PG 0160


FrameBossTM

010984 1

010982 1

010983 1

PA37040 1

PA37038 1

PA37023 1

PA11030 1

Accessories

PA1613 Safety Glasses 1

PA9333 1

PBT Pin Breaker Tool 1

PAWS8 1

PA9316 1

PG 0103

Item Code Shank Length (mm) Head Diameter (mm) Pack Qty

LDU25 25 8 100

LDU32 32 8 100

LDU38 38 8 100

LDU42 42 8 100

LDU50 50 8 100

LDU57 57 8 100

LDU65 65 8 100

LDU75 75 8 100

LDU90 90 8 100

LDU99 100 8 100

PG 0104


C925C 25 9 500

C930C 30 9 500

C940C 40 9 300

C950C 50 9 300

C960C 60 9 300

PG 0103


LDU60F 60 5 200

LDU75F 75 5 200

LDU99F 99 5 200

Piston

Piston Return Spring (x2)

Piston Insulation Ring (x2)

Fastener Guide Assembly

Magazine Assembly

Spall Guard

POWDER ACTUATED TOOL ACCESSORIES (Cont.)

FASTENERS & ASSEMBLIES FOR CURRENT RAMSET TOOLS

Insulation Fastener Adaptor Kit

COLLATED DRIVE PINS FOR USE WITH FrameBoss™

DRIVE PINS FOR USE WITH FrameBoss™ (TS60P), FrameMaster™ (TS750P), FormMaster™ & JobMaster™

TIMBER FORMWORK PINS FOR USE WITH FormMaster™ & FrameMaster™ (TS750P)

Lubricating & Releasing Oil

Tool Maintenance Kit

Safety Warning Sign



PG 0106


SP12 100

SC925 100

SC930 100

SC940 100

SC950 100

SC960 100

SC970 Pin for fixing to steel 100

SC950W 100

SC960W 100

PG 0106


SC925C 25 9 500

SC930C 30 9 500

SC940C 40 9 300

SC950C 50 9 300

SC960C 60 9 300

PG 0106


SBR9 100

WASHERED PIN ASSEMBLIES PG 0103

Item Code Shank Length (mm) Washer Diameter (mm) Pack Qty

LWU25 25 22 100

LWU32 32 22 100

LWU25K 25 Knurled 16 100

LWU75 75 16 100

PG 0106


LAU25 25 8 100

LAU30H 30 8 100

PG 0106

Item CodeInsulation Thickness

(mm)Pack Qty

CI640 40 200

CI650 50 200

CI670 70 - 75 200

CI6100 90 - 100 100

CI960 60 - 65 100

SPECIALIST PINS FOR FIXING TIMBER TO STRUCTURAL STEEL

ANGLE CLIP (CATINERY BRACKET) PIN ASSEMBLIES

Pin for fixing 45mm timber to steel

Washered Pin for fixing 35mm timber to steel

Washered Pin for fixing 45mm timber to steel

INSULATION FASTENERS - (FOR USE WITH InsulFastTM

PA TOOL)

SACRIFICIAL FORMWORK PINS FOR USE WITH FrameBossTM

, FormMaster™ & JobMaster™

SPECIALIST COLLATED PINS FOR FIXING TO STRUCTURAL STEEL & HARD CONCRETE USE WITH FrameBoss™

Pin for fixing track to steel

Pin for fixing to steel

20mm Pin for Steel with 14mm Washer



Pin for fixing 35mm timber to steel



INSULATION FASTENERS PG 0106

Item CodeMax. Insulation

Thickness (mm)Pack Qty

CR950P 25 200

PG 0106


LHS22 22 14 1000

CANE BIN ASSEMBLIES 25 mm PIN PG 0103


LC825 25 mm Double Clip 500

PG 0180


RCA25F Angle (Ramclip) 100

PG 0180

Item Code Disc Diameter Disc Hole Diameter (mm) Pack Qty

RCD16F 16mm (5/8") 5 100

RCD22F 22mm 5 100

ELECTRICAL / PLUMBING FIXING PRODUCTS PG 0184


LZU30H 100

FASTENERS & ASSEMBLIES FOR PREVIOUS RAMSET TOOLS

DRIVE PINS FOR J20, J10 & J20S PG 0113


HDB50 50 6 100

HDB64 64 6 100

HDB75 75 6 100

HDB95 95 6 100

DRIVE PINS FOR USE WITH OTHER MAGAZINE TOOLS PG 0104


RHC22 22 8 100

RHC27 27 8 100

RHC52 52 8 100

RHC62 62 8 100

RHC72 72 8 100

POWDER ACTUATED ACCESSORIES - CLIPS

WASHERS (DISCS) FOR USE WITH STANDARD P.A. PINS

HEAVY DUTY DRIVE PIN ASSEMBLY for DekMaster™ (D230)

PA Threaded Rod Hanger - M10



STRIP POWERLOADS .27 calibre

PG 0107

Item Code Strength Colour Pack Qty

PLSGR22 Weak Green 100

PLSYW22 Medium Yellow 100

PLSRD22 Strong Red 100

SHORT SERIES POWERLOADS .22 calibre

FOR USE WITH JobMaster™ PG 0107


PLCGR22S Weak Green 100

PLCYW22S Medium Yellow 100

PLCRD22S Strong Red 100

FOR USE WITH DekMaster™ (D230) PG 0107


PLDYW25X Medium Yellow 100

PLDBU25X Strong Blue 100

PLDRD25X Very Strong Red 100

DISC POWERLOADS .25 calibre

PG 0107


PLDGR25 Weak Green 100

PLDYW25 Medium Yellow 100

DISC POWERLOADS .25 calibre

FOR USE WITH D200, D90 & D60 PG 0107


PLDGR25 Weak Green 100

PLDYW25 Medium Yellow 100

PLDRD25L Strong Red 100

POWERLOADS

.22 calibre FOR USE WITH J20S & J20 PG 0107


PLCGR22S Weak Green 100

PLCYW22S Medium Yellow 100

PLCRD22S Strong Red 100

PLCPU22S Very Strong Purple 100

POWERLOADS FOR RAMSET POWDER ACTUATED FIXING TOOLS

FOR USE WITH FrameBoss™, FrameMaster™ (TS750P), FormMaster™, TyMaster, Rocket, Striker, S75A, & TS750. (TS60P)

FOR USE WITH InsulFastTM



PG 0120


a TF1100 1

b TrakMaster 1

c CableMaster 1

d InsulFastGT InsulFastTM

GT-Insulation Fixing Tool 1

a b c d

PG 0182


TrakFastTM

B20542 Battery - TrakFast 1

TFBC 1

TrakMasterTM

TMBP 1

TMBC 1

337700 1

333700 1

010670 1

CableMasterTM

TMBP 1

TMBC 1

336800 1

CSA2025 1

CSA1632 1

PULSALIFT 1

InsulFastTM

GT

TMBP 1

TMBC 1

Common Accessories

PA1613 Safety Glasses 1

TMBCPS 1

900507 1

B20544L 1 PulsaLift Pole Tool

Battery Charger (requires power supply)

Fastener Guide - CableMaster

CableMaster Saddle adapt 20/25mm

CableMaster Saddle adapt 16/32mm


Fastener Guide - TrakMaster

Magnetic Washer Adaptor - TrakMaster

40 Pin Magazine - TrakMaster

Battery - TrakMaster / CableMaster

GAS TECHNOLOGY FIXING TOOL ACCESSORIES

Battery - TrakMaster / CableMaster / InsulFast GT

PulsaLift Pole Tool (2.4m - 3.8m Working Height)


Battery - TrakMaster / CableMaster / InsulFast GT

Battery Charger Power Supply

TrakFastTM

- Original Track Fixing Tool

GAS TECHNOLOGY TOOLS

TrakMasterTM

- Pulsa Technology for Track & Mesh

In - Car Charger Lead

Gas Tool Degreaser / Lubricant

CableMasterTM

- Pulsa Tech. For Electrical & Plumbing

Battery Charger - TrakFast (requires power supply)



PG 0124

Item Code Shank Length (mm) Pack Qty

011204 25mm Washers 1000

PG 0123


C620 20 500

C625 25 500

C630 30 500

C635 35 500

PG 0123

Item Code Pack Qty

HC615 500

SC620 500

HC617 500

HC622 500

HC632 Premium Hard Concrete & Steel 32mm 500

PG 0125

Item Code Pack Qty

CG620 500

TRAKFAST PINS & FUEL PACKS - STANDARD DUTY PG 0123


FPP012 13 1000

FPP034B 19 1000

FPP100 25 1000

FPP114 32 1000

TRAKFAST PINS & FUEL PACKS - HEAVY DUTY PG 0123


FPP012S 13 1000

CABLEMASTER PINS & FUEL PACKS - SPECIALIST SOFT WASHERED PINS FOR PVC FITTINGS

Premium Hard Concrete & Steel 17mm

Premium Hard Concrete & Steel 22mm

Description / Shank Length (mm)

Soft Washered Pins - 20mm

ACCESSORIES TO SUIT MAGNETIC WASHER ADAPTOR

TRAKMASTER / CABLEMASTER PINS & FUEL PACKS - STANDARD DUTY

Description / Shank Length (mm)

TRAKMASTER / CABLEMASTER PINS & FUEL PACKS - HEAVY DUTY FOR STEEL AND HARD CONCRETE

Heavy Duty Steel/Concrete - 15mm

Heavy Duty Steel/Concrete - 20mm



TRAKFAST BREAKAWAY PINS & FUEL PACKS PG 0123


FPP034T 19 1000

FPP100T 25 1000

FPP112T 38 1000

TRAKFAST FUEL PACKS PG 0124


TFGAS 6

INSULFAST GT FASTENERS


IG625 White Suits Insulation - 25mm - 30mm 400

IG625B Black Suits Insulation - 25mm - 30mm 400






IG6100 White Suits Insulation - 100mm - 110mm (Available Q1 2011) 200

TrakFast Fuel Cell Pack



CABLEMASTER ELECTRICAL CONTRACTOR PACKS PG 0125


CPGCL 500

CPGCLHC617 500

CPGCLHC622 500

CPGCH 125

CPGCH140 200

CPGCT 500

CPGCTL 300

CPGSH20 400

CPGSH25 400

CPGDAS20 400

CPGDAS25 400

CPGEC16 500

CPGEC20 500

CPGEC25 500

CPGEC32 250

CPGFP02 500

CPGFP04 500

CPGTRH 400

CPGCWB 400

EClipTM

CableHornTM

ClipElecTM

CTClipTM

CABLEMASTER ELECTRICAL CLIPS PG 0125


CABLEHORN Double cable bow 35

CLIPELEC Clipelec & Cable tie 100

CTCLIP One piece Clip w/tie 100

ECLIP20 100

ECLIP25 100

CSH20 100

TRH0810 100

CWBKT 100

SPMW 500

Strap and

Plate WasherSaddles Half Saddles (Metal) FP FireFixTM Catenary Wire Bracket Threaded Rod Hanger

Catinary Wire Bracket Assy.

Strap & Plate Mounting Washer

Contractor Pack - Clipelec

Contractor Pack - Clipelec + Hard Conc. Pins 17mm

Contractor Pack - Clipelec + Hard Conc. Pins 22mm

C/master Saddle Half 20mm

Threaded Rod Hanger M8/M10

* Contractor Packs contain electrical clips, pins, fuel cells and cable ties where applicable.

Contractor Pack - Double Cablehorn

Contractor Pack - Single Cablehorn

Contractor Pack - CTCLIP

Contractor Pack - FP FirefixTM

7 to 8mm

Contractor Pack - FP FirefixTM

8 to 9.5mm

Contractor Pack - Threaded Rod Brkt.

Contractor Pack - Catinary Wire Brkt.

C/Pack - Direct Align H/saddle 25mm

Contractor Pack - ECLIP16




Snap-on Conduit clip 20mm

Snap-on Conduit clip 25mm

Contractor Pack - CTCLIP LARGE 40-60mm

Contractor Pack - H/saddle 20mm

Contractor Pack - H/saddle 25mm

C/Pack - Direct Align H/saddle 20mm



18 VOLT LITHIUM-ION CORDLESS RANGE PG 0201


a CRH18V 18V Rotary Hammer 1

b CHDD18V 18V Hammer Drill Driver 1

c CDD18V 18V Drill Driver 1

d CID18V 18V Impact Driver 1

e CIW18V 18V Impact Wrench 1

f CRS18V 18V Reciprocating Saw 1

g CCS18V 18V Circular Saw 1

h CT18V 18V Torch 1

i CRADIO 18V Radio 1

j CBAT18V 18V Battery 1

k CC1828V Charger 1

l CKITBAG Bag 1

m CBASEKIT18V 18V Base Kit (2xCBAT18V,1xCC1828V,1XCT18V,1XCKITBAG) 1

a

b c d e

f g h i

j k l m

POWER TOOLS AND ACCESSORIES



DRIVERS BITS & ACCESSORIES PG 0580

Item Code Driver Type Pack Qty

HDPH02025 #2 PH x 25 mm 10

HDPH02050 #2 PH x 50 mm 10

HDPH02100 #2 PH x 100 mm 10

HDPH02150 #2 PH x 150 mm 10

HDPH02045DE 10

HDPH02065DE #2 PH Db. x 65 mm 10


HDHX05032 10

HDUN04065 10

HDUN05050 10

HDUN05065 10

HDUN06065 10


920508 8mm Socket 10

920510 10mm Socket 10

920515 15mm Socket 10

920517 17mm Socket 10

920518 18mm Socket 10

920519 19mm Socket 10

Item Code Driver Type Pack Qty PG 0724

016707 10mm Long Socket 1



921556 SDS - 1/2" Drive Socket Adaptor 1

Item Code Description Pack Qty PG 0201

CRS18VBMC 18V Reciprocationg Saw Blade - METAL 5

CRS18VBWC 18V Reciprocationg Saw Blade - WOOD 5

CCS18VBWC 18V Circular Saw Blade - WOOD 1

#2 PH Db. Ended x 45 mm

Int. Hex Drive 5 x 32 mm

Hex Drv. Mag 1/4" x 65 mm






DynaDrill™ HAMMERS & DEMOLITION HAMMERS PG 0200


a DD526 2Kg Rotary Hammer 1

b DD527 2Kg Combi Hammer 1

c DD532 1

d DD544 1

e DD565 1

f DD576 1

g DD665 1

h DD610 1

i DD528A60C 1

DD528CH DD528 Charger 1

DD528BP30 Battery 3.0Ah 1

a b c

d e f

g h

i

5Kg Combi Hammer

7Kg Combi Hammer

10Kg Demolition Hammer

3Kg Rotary Hammer

4Kg Combi Hammer

24V Cordless Rotary Hammer Kit (Tool + 2x3.0Ah Batteries + Charger)

5Kg Demolition Hammer



R3™ PLUS CARBIDE DRILL BITS PG 0203

Item Code DiameterWork Length (mm) x

Total length (mm)Pack Qty

DDR306050X3 1/4" 50 x 110 1

DDR306100X3 1/4" 100 x 160 1

DDR306150X3 1/4" 150 x 210 1

DDR312125X7 1/2" 150 x 210 1

DDR305050 5 50 x 110 1

DDR305100 5 100 x 160 1

DDR305065X5 5.5 80 x 140 1

DDR305125X5 5.5 150 x 210 1

DDR306050 6 50 x 110 1

DDR306100 6 100 x 160 1

DDR306150 6 150 x 210 1

DDR307065 7 100 x 160 1

DDR308065 8 100 x 160 1

DDR308150 8 150 x 210 1

DDR310100 10 100 x 160 1

DDR310180 10 200 x 260 1

DDR310400 10 400 x 460 1

DDR312125 12 150 x 210 1

DDR312250 12 250 x 310 1

DDR312400 12 400 x 460 1

DDR313200 13 200 x 260 1

DDR314200 14 200 x 250 1

DDR315150 15 150 x 200 1

DDR316125 16 150 x 200 1

DDR316200 16 200 x 250 1

DDR316400 16 400 x 450 1

U3™ PLUS CARBIDE DRILL BITS PG 0203



DDU306050X3 1/4" 50 x 110 1

DDU306100X3 1/4" 100 x 160 1

DDU306150X3 1/4" 150 x 210 1

DDU305050 5 50 x 110 1

DDU305100 5 100 x 160 1

DDU306050 6 50 x 110 1

DDU306100 6 100 x 160 1

DDU306150 6 150 x 210 1

DDU308100 8 100 x 160 1

DDU308150 8 150 x 210 1

DDU310100 10 100 x 160 1

DDU310200 10 200 x 260 1

DDU312150 12 150 x 210 1

DDU312250 12 250 x 310 1

DDU314200 14 200 x 250 1

DDU316200 16 200 x 250 1



R3™ PLUS CARBIDE QUATRO HEAD DRILL BITS PG 0203



DQR316200 16 250 x 300 1

DQR316400 16 400 x 450 1

DQR318200 18 200 x 250 1

DQR318400 18 400 x 460 1

DQR319250 19 250 x 310 1

DQR320200 20 200 x 250 1

DQR320400 20 400 x 450 1

DQR322200 22 200 x 250 1

DQR322400 22 400 x 450 1

DQR324200 24 200 x 250 1

DQR324400 24 400 x 450 1

DQR325400 25 400 x 450 1

DQR326200 26 250 x 300 1

DQR326400 26 400 x 450 1

R3™ MAX DRILL BITS PG 0203



DDSM12200 12 200 x 340 1

DDSM12400 12 400 x 540 1

DDSM14200 14 200 x 340 1

DDSM14400 14 400 x 450 1

DYSM16200 16 250 x 390 1

DYSM16400 16 400 x 540 1

DYSM18200 18 250 x 390 1

DYSM18400 18 400 x 540 1

DYSM19195 19 195 x 350 1

DYSM20200 20 200 x 320 1

DYSM20400 20 400 x 520 1

DYSM20800 20 800 x 920 1

DYSM22200 22 200 x 320 1

DYSM22400 22 400 x 520 1

DYSM24200 24 200 x 320 1

DYSM24400 24 400 x 520 1

DYSM25400 25 400 x 520 1

DYSM25800 25 800 x 920 1

DYSM26400 26 400 x 520 1

DYSM28450 28 450 x 570 1

DYSM30450 30 450 x 570 1

DYSM32450 32 450 x 570 1

DYSM35450 35 450 x 570 1

DYSM38450 38 450 x 570 1

DYSM40450 40 450 x 570 1



CHISELS - R3™ PLUS PG 0206

Item Code Total Length (mm) Type Pack Qty

DHR3PCS 250 Point 1

DHR3FCS 250 20 mm Flat 1

DHR3SC040 250 40 mm Spade 1

CHISELS - R3™ MAX PG 0206

Item Code Total Length (mm) Type Pack Qty

DHSMPCS 280 Point 1

DHSMPCM 400 Point 1

DHSMPCL 600 Point 1

DHSMFCS 280 25mm Flat 1

DHSMFCM 400 25mm Flat 1

DHSMFCL 600 25mm Flat 1

DHSMSC080 300 50mm Spade 1



CORE BIT & STAR CUTTER RATIO SYSTEMS PG 0203

Item Code Diameter (mm) Description Pack Qty

DDHR12150 12 Pilot Bit 1

DCHR050 50 Core Bit 1




DAHR25280 - Extension 1

DASMHR - Adapt. R3 Max 1

DAR3HR - Adapt. R3 Plus 1

SHORT RIVETING DRILLS PG 0233

Item Code Drill Size Pack Qty

DSUS04DE 1/8" Double End 10

DSNS30DE No. 30 Double End 10



DYNADRILL™ ACCESSORIES PG 0280

Item Code Description Pack Qty.

054288 1

DAR3DH 1

DAR3HR 1

DASMR3 1

Quick Fit Keyless Chuck For 4kg Hammer

Chuck Adaptor - R3 Plus

Adaptor Ratio - R3 Plus

Adaptor R3 Max - R3 Plus



DIAMOND DRILLING

DIAMOND DRILLING MACHINES PG 0210


RM160 1

RM250 1

623003 1

TRIX160 Small Diamond Drilling Rig 1

TRIX350 Large Diamond Drilling Rig 1

AC1630P 30L Wet & Dry Vacuum Cleaner (Permanent Clean) 1

620900 50L Wet & Dry Vacuum Cleaner 1

DIAMOND DRILLING CORE BITS - WET PG 0213

Item Code Length (mm) Diameter (mm) Pack Qty

DCDS14300 300 14 1

DCDS16300 300 16 1

DCDS18300 300 18 1

DCDS20300 300 20 1

DCDS24300 300 24 1

DCDS26300 300 26 1

DCDS32300 300 32 1

DCDS35300 300 35 1

DCDS40300 300 40 1

DCDS45300 300 45 1

DCDS52300 300 52 1

DCDL52450 450 52 1

DCDL66450 450 66 1

DCDL76450 450 76 1

DCDL82450 450 82 1

DCDL91450 450 91 1

DCDL101450 450 101 1

DCDL116450 450 116 1

DCDL121450 450 121 1

DCDL126450 450 126 1

DCDL131450 450 131 1

DCDL142450 450 142 1

DCDL151450 450 151 1

DIAMOND DRY CUTTING MACHINE PG 0210


RW150E Concrete Chaser 1

RM160 Driling Machine

1/2" BSP Thread

1 1/4" UNC

RM250 Drilling Machine

RM350 Drilling Machine



DIAMOND DRILLING ACCESSORIES PG 0210


624005 1

623395 1

623327 1

620827 1

624025 1

624026 1

622220 1

172710 1

624019 1

624020 5

624022 1

624023 5

622200 Sharpening Plate 1

622020 1

622070 1

172770 1

622100 1

644004 1

644006 1

644030 1

INDUSTRIAL ANGLE GRINDERS PG 0220


RG230E 1

610980 Dust Hood for Angle Grinder 230mm - Grinding 1

610999 Dust Hood for Angle Grinder 230mm - Cutting 1

GR30FS Anti-Lock Flanges to suit Angle Grinder 230mm 1

SG125E 1

DIAMOND CUTTING BLADES PG 0213

Item CodeDiameter (mm) x Bore

Dia. (mm)Description Pack Qty

GC102TS 102 x 20 Turbo Super 1

610001 125 x 22 Titan + Concrete 1



610401 115 x 22 Titan + Universal 1





610210 125 x 22 Type A Abrasive 1



610046 125 x 22 Universal Silver 1

610045 230 x 22 Universal Silver 1

Modular Ring Connection

Vacuum Pump SDP101

Vacuum Set for TRIX160 Rig

Vacuum Set for TRIX350 Rig

Quick Release Connector Bolts

Portable Water Supply Unit

Water Collector for TRIX160 Rig

Water Collector for TRIX350 Rig

Concrete Grinder 125mm

Extension Rod 1/2" x 300mm

Extension Rod 1 1/4" x 400mm

Membranes to suit TRIX160 Water Collector

Membranes to suit TRIX350 Water Collector

Kit-Quick connection CDBR130

Quick Connection RM350/CDBR350

Core Bit Adaptor 1 1/4" x 1/2"

5 metre Antistatic Hose

Filter Kit for R1600-50 Vacuum

Accessory Kit for R1600-50 Vacuum

Kit with 5 Copper Rings

Angle Grinder 230 mm



DIAMOND CUP WHEELS PG 0213

Item Code Diameter (mm) Description Pack Qty

610497 125 Turbo Abrs 1

610492 125 Turbo Hard 1

610477 125 Single Row Hard 1

610487 125 Single Row Abrs 1

610472 125 Double Row Hard 1

610482 125 Double Row Abrs 1

610494 125 Superturbo Hard 1

610499 125 Superturbo Abrs 1

610493 180 Turbo Hard 1

610468 180 Turbo Abrs 1

CUTOFF CENTRE WHEELS PG 0240

Item CodeDiameter (mm) x Bore

(mm)

Diameter (Imperial) x

Bore (Imperial)Pack Qty

GA230MCU7 230 x 22.2 9" x 7/8" 10

GA102SC16 102 x 16 4" x 5/8" 10

GA115SCU7 115 x 22.2 4 1/2" x 7/8" 10

GA127SCU7 127 x 22.2 5" x 7/8" 10

GA230SCU7 230 x 22.2 9" x 7/8" 10

GA356SC25 356 x 25 - 10

DEPRESSED CENTRE WHEELS PG 0240

Item Code

Diameter (mm) x

Width (mm) x Bore

(mm)

Diameter (Imperial) x Width (Imperial) x Bore (Imperial) Pack Qty

GA230SGU7 230x6x22.2 9"x1/4"x7/8" 10

LASER LEVELLING TOOLS PG 0230


a RL300 Rotating Laser 1

b RLML 1

c RL5W Multi-Point Laser 1

d RLCL Cross Line Laser 1

e RLM50 Distance Meter 1

RLTP Tripod 1

RST5 Laser Measuring Staff 5M 1

RFSP Laser Floor to Ceiling Pillar 1

RWCM Laser Wall / Ceiling Mount 1

a b c d e

Multi-Liner Laser



RAMSET™ SCREWDRIVERS & DRILLDRIVERS PG 0220


CSD14A20C 1

DD514A24C 1

CIW280 1

BP1420 1

BP1424 1

UBC7224 Charger (60 min.) 1

CIW280BP 18V 2.6Ah Battery 1

CIW280CH 18V Charger 1

RCG600 1

MECHANICAL ANCHORING

PG 0333

Item CodeSize

(mm)

Length

(mm)Pack Qty

CW415 2.4 15 100

CW415Q500 2.4 15 500

CW420 2.4 20 100

CW420Q500 2.4 20 500

CD425 2.4 25 100

CW425 2.4 25 100

CW425Q500 2.4 25 500

CD430 2.4 30 100

CW430 2.4 30 100

CW430Q500 2.4 30 500

CD440 2.4 40 100

CW440 2.4 40 100

CD525 3.2 25 100

CK540 3.2 38 100

CD540 3.2 40 100

CF650 3.8 50 100

CF660 3.8 60 100

CF675 3.8 75 100

CK750 3.6 50 100

CK760 4.0 63 100

CK775 4.2 75 100

14V Cordless Drill Driver Kit

14V Cordless Hammer Drill Driver Kit

14V 2.0 Ah Battery

18V Cordless Impact Wrench

14V 2.4 Ah Battery

CONCRETE NAILS

13.2V Cordless Caulking Gun



MECHANICAL ANCHORING

SpaTec™ Plus SAFETY ANCHORS PG 0306

Item Code Anchor Size (mm)Anchor Length (mm) x

Thread Size (mm)Pack Qty

l SP10105 15 105 x M10 25

l SP10105F 15 105 x M10 25

u SP10110SS* 15 110 x M10 25

l SP12105 18 105 x M12 25

l SP12120 18 120 x M12 25

l SP12120F 18 120 x M12 25

u SP12120SS* 18 120 x M12 25

l SP16145 24 145 x M16 10

u SP16145ESS#* 24 145 x M16 10

l SP20170 28 170 x M20 5

# Hex nut assembly

* Available to order. Lead times apply.

Boa™ Coil ANCHORS - COMPLETE PG 0306

Item Code Anchor SizeAnchor Length

(mm)Pack Qty

l BAC08075 1/2"/13 mm 75 50

l BAC08100 1/2"/13 mm 100 25

l BAC10090 5/8"/16 mm 90 25

l BAC10125 5/8"/16 mm 125 25

l BAC12115 3/4"/19 mm 115 20

Boa™ Coil ANCHORS - COIL ONLY PG 0306

Item Code Anchor Size Pack Qty

l BAC08 1/2"/13 mm 100

l BAC10 5/8"/16 mm 50

l BAC12 3/4"/19 mm 50

HEAVY DUTY ANCHORS

l Carbon Steel Zinc Plated u Stainless Steel 316



lPG 0303 / nPG 0320 / u PG 0318


Thread SizePack Qty

l T06055 6 55 x M6 100

u T06055SS 6 55 x M6 100

l T06085 6 85 x M6 100

u T06085SS 6 85 x M6 100

l T06120 6 120 x M6 50

l T06150 6 150 x M6 100

l T06180 6 180 x M6 100

l T08065 8 65 x M8 50

u T08065SS 8 65 x M8 100

l T08090 8 90 x M8 50

l T08090GH 8 90 x M8 50

u T08090SS 8 90 x M8 50

l T10075 10 75 x M10 50

u T10075SS 10 75 x M10 50

l T10090 10 90 x M10 50

n T10090GH 10 90 x M10 50

u T10090SS 10 90 x M10 50

l T10120 10 120 x M10 20

l T12080 10 80 x M12 20

n T12080GH 12 80 x M12 20

u T12080SS 12 80 x M12 20

l T12100 12 100 x M12 20

n T12100GH 12 100 x M12 20

u T12100SS 12 100 x M12 20

l T12120 12 120 x M12 20

l T12140 12 140 x M12 20

n T12140GH 12 140 x M12 20

u T12140SS 12 140 x M12 20

l T12180 12 180 x M12 20

n T12180GH 12 180 x M12 20

l T16100 16 100 x M16 20

n T16100GH 16 100 x M16 20

u T16100SS 16 100 x M16 20

l T16125 16 125 x M16 20

n T16125GH 16 125 x M16 20

u T16125SS 16 125 x M16 20

l T16150 16 150 x M16 20

n T16150GH 16 150 x M16 20

u T16150SS 16 150 x M16 20

l T16175 16 175 x M16 20

n T16175GH 16 175 x M16 20

u T16175SS 16 175 x M16 20

l T20120 20 120 x M20 10

n T20120GH 20 120 x M20 10

u T20120SS 20 120 x M20 10

l Carbon Steel Zinc Plated n Hot Dipped Galvanised u Stainless Steel 316

TruBolt™ ANCHORS



TruBolt™ ANCHORS (Cont.) lPG 0303 / nPG 0320 / u PG 0318


Thread SizePack Qty

l T20160 20 160 x M20 10

n T20160GH 20 160 x M20 10

u T20160SS 20 160 x M20 10

l T20215 20 215 x M20 10

n T20215GH 20 215 x M20 10

TRUFAST PUSH-PULL ANCHORS PG 0303

Item Code Anchor Size (mm)Anchor Length

(mm)Pack Qty

l TFE06 6 55 100

l TFE06120 6 120 100

AnkaScrew™ ANCHORS PG 0340

Item CodeAnchor Size (mm) x

Anchor Length (mm)Head Type Pack Qty

l AS05030H 5 x 30 Hex Flange 100


p AS06050HGH 6 x 50 Hex Flange 100





l AS08060H 8 x 60 Hex Head 100

p AS08060HGH 8 x 60 Hex Head 100



l AS08100H 8 x 100 Hex Head 100






l AS10100H 10 x 100 Hex Head 50




l AS12100H 12 x 100 Hex Head 50


l AS12150H 12 x 150 Hex Head 20



l RAP02 500 PG 0724Services Pack(500 x AS05030H+5/16"mag nutsetter)

MEDIUM DUTY ANCHORS

l Carbon Steel Zinc Plated n Hot Dipped Galvanised p Mechanically Galvanised u Stainless Steel 316



DynaBolt™ ANCHORS HEX BOLT lPG 0300 / uPG 0318


Thread SizePack Qty

l DP08045H 8 45 x M6 100

u DP08045HSS 8 45 x M6 100

l DP08070H 8 70 x M6 50

u DP08070HSS 8 70 x M6 50

l DP10045H 10 45 x M8 50

u DP10045HSS 10 45 x M8 50

l DP10055H 10 55 x M8 50

u DP10060HSS 10 60 x M8 50

l DP10080H 10 80 x M8 50

u DP10080HSS 10 80 x M8 50

l DP10105H 10 105 x M8 25

u DP10105HSS 10 105 x M8 25

l DP12065H 12 65 x M10 25

l DP12075H 12 75 x M10 25

u DP12075HSS 12 75 x M10 25

l DP12105H 12 110 x M10 20

l DP16110H 16 110 x M12 10

lPG 0300/ nPG 0320/ uPG 0318


Thread SizePack Qty

l D6026 6 26 x M4.5 100

l DP06040 6 38 x M4.5 100

u DP06040SS 6 38 x M4.5 100

l DP06060 6 57 x M4.5 100

u DP06060SS 6 57 x M4.5 100

l DP08040 8 40 x M6 100

u DP08040SS 8 40 x M6 100

l DP08065 8 66 x M6 50

u DP08065SS 8 66 x M6 50

l DP08090 8 92 x M6 50

l DP10040 10 41 x M8 50

n DP10040GH 10 41x M8 50

l DP10050 10 49 x M8 50

n DP10050GH 10 49 x M8 50

u DP10050SS 10 49 x M8 50

l DP10075 10 76 x M8 50

n DP10075GH 10 76 x M8 50

u DP10075SS 10 76 x M8 50

l DP10100 10 103 x M8 25

n DP10100GH 10 103 x M8 25

u DP10100SS 10 103 x M8 25

l DP10125 10 124 x M8 25

l DP12060 12 55 x M10 25


DynaBolt™ ANCHORS HEX NUT



lPG 0300/ nPG 0320/ uPG 0318


Thread SizePack Qty

n DP12060GH 12 55 x M10 25

u DP12060SS 12 55 x M10 25

l DP12070 12 70 x M10 25

n DP12070GH 12 70 x M10 25

u DP12070SS 12 70 x M10 25

l DP12100 12 98 x M10 20

n DP12100GH 12 98 x M10 20

u DP12100SS 12 98 x M10 20

l DP12125 12 126 x M10 20

n DP12125GH 12 126 x M10 20

u DP12125SS 12 126 x M10 20

l DP16065 16 62 x M12 20

n DP16065GH 16 62 x M12 20

l DP16110 16 106 x M12 10

n DP16110GH 16 106 x M12 10

l DP16140 16 140 x M12 10

n DP16140GH 16 140 x M12 10

l DP20080 20 81 x M16 10

n DP20080GH 20 81 x M16 10

l DP20115 20 113 x M16 5

n DP20115GH 20 113 x M16 5

l DP20160 20 157 x M16 5

DynaBolt™ ANCHORS DECORATIVE HEADS

Round Head PG 0300


Thread SizePack Qty

l D6032R 6 32 x M4.5 100

l DP06055R 6 55 x M4.5 100

Flat Head lPG 0300/ uPG 0318


Thread SizePack Qty

l D6034F 6 34 x M4.5 100

l DP06060F 6 60 x M4.5 100

u DP06060FSS 6 60 x M4.5 100

l DP06075F 6 75 x M4.5 100

u DP06075FSS 6 75 x M4.5 100

l DP06100F 6 100 x M4.5 100

l DP08060F 8 60 x M6 100

l DP08085F 8 85 x M6 50

l DP10075F 10 75 x M8 50

l DP10100F 10 100 x M8 50

l DP10125F 10 125 x M8 25


DynaBolt™ ANCHORS HEX NUT (Cont.)



DynaBolt™ SPECIALS PG 0300

Item Code Anchor Size (mm) Bolt Style Pack Qty

l D06026S 6 Set Lok 500

l D06038S 6 Set Lok 100

l D08042E 8 Tie Wire Dynabolt 100

l D08045K 6 Hook Bolt 100

l D08045X 6 Eyebolt 100

DynaBolt™ DECORATIVE POST HEADS l PG 0380/ uPG0318

Item Code Anchor Size (mm) Head Style Pack Qty

u DR045SS 6 Round 100

l DR06 8 Round 100

u DR06SS 8 Round 100

u DF045SS 6 Flat 100

l RFM06 8 Flat 100

u DF06SS 8 Flat 100

l REM06 8 Tie Wire 100

l RFM08 10 Flat 100

u DF08SS 10 Flat 100



DynaSet™ DROP-IN ANCHORS l PG 0312/ uPG 0318


Thread SizePack Qty

l DSF06 8 25 x M6 100

l DSM06 8 25 x M6 100

u DSM06SS 8 25 x M6 100

l DSM08 10 30 x M8 100

u DSM08SS 10 30 x M8 50

l DSF10 12 30 x M10 50

l DSM10 12 40 x M10 50

u DSM10SS 12 40 x M10 50

l DSF12 16 50 x M12 50

l DSM12 16 50 x M12 50

u DSM12SS 15 50 x M12 50

l DSM16 20 65 x M16 25

u DSM16SS 20 60 x M16 25

l DSM20 25 80 x M20 25




DynaSet™ DROP-IN ANCHORS PG 0724


RAP06 500

RAP01 500

RAP12 200

DynaSet™ SETTING TOOLS PG 0380

Item Code Pack Qty

SETDS1 1

SETDS2 1

SETDF3 1

SETDS3 1

SETDS4 1

SETDS5 1

SETDS6 1

pPG320/ uPG 0319


Thread SizePack Qty

u RSR12SS 16 138 x M12 4

p RSR12GM 16 138 x M12 4

SETSA4 Setting Tool 1

Item Code DescriptionAnchor Length (mm) x

Thread SizePack Qty

u DSM12SS Dynaset 50 x M12 50

Loxin™ SHIELD ANCHORS PG 0312


Thread SizePack Qty

l RLM08 16 52 x M8 25

l RLM10 16 52 x M10 25

l RLM12 22 65 x M12 25

l RLM16 26 75 x M16 25

Elect.Mech. Services Pk (500 x DSF06 + set tool)

DSM16/DSM16SS

DynaSet™ SAFETY RING ANCHORS Note: Request Ramset™ Tech Data Sheet for installation instructions.

DSM10/DSM10SS

DSM12/DSF12/DSM12SS

DSM20

To Suit Dynaset

Elect. Mech. Services Pk(500 x DSF10 + set tool)

Elect. Mech. Services Pk (200 x DSF12 + set tool)

DSM08/DSM08SS

DSF10

DSM06/DSF06/DSM06SS

l Carbon Steel Zinc Plated u Stainless Steel 316 p Mechanically Galvanised



RediDriveTM PG0314


(mm)Pack Qty

p RD05030 5 30 100

p RD05040 5 40 100

p RD05050 5 50 100

p RD05065 5 65 100

p RD05075 5 75 100

ShureDriveTM

ANCHORS lPG 0315/ uPG 0318


(mm)Pack Qty

l SDM05022 5 22 100

l SDM06030 6 30 100

u SDM06030SS 6 30 100

l SDM06050 6 50 100

ELECTRICAL SUPPORT FIXINGS

Item CodeCapacity

(mm)Type Pack Qty

CHLD Cable bundles Cable Holder + Anchor 50 DynaClip

CWE05040 Cat wire Cat Wire Eye 100 PG 0718

DK10 8 – 10 Dynaclip 100

DK20 16 - 20 Dynaclip 100

DK32 25 - 32 Dynaclip 100

VF1 1.6 - 2.5 Vertical Flange Clip 100

HF01 Flange clip for chain 100 Vertical Flange Clip

RamPlugsTM

- STANDARD PG 0330


(mm)Pack Qty

DNP05 5 25 100

DNP06 6 30 100

DNP07 7 30 100

DNP08 8 40 100

DNP10 10 50 50

DNP12 12 60 25

RamPlugsTM

- LONG PG 0330


(mm)Pack Qty

DLP08 8 80 100

DLP10 10 80 50

CatWire Eye

PG 0724

Cable Holder

l Carbon Steel Zinc Plated u Stainless Steel 316 p Mechanically Galvanised

LIGHT DUTY ANCHORS



RamPlugsTM

- ULTRA LONG PG 0330


(mm)Pack Qty

l DUP10080F 10 80 25

l DUP10080H 10 80 25

l DUP10100F 10 100 25

l DUP10100H 10 100 25

l DUP10135F 10 135 25

l DUP10135H 10 135 25

l DUP10160F 10 160 25

l DUP10160H 10 160 25

InsulFastTM

DRILL ANCHORS PG 0331

Item Code Anchor Size (mm)Insulation Thickness

(mm)Pack Qty

CB5060 8 50 to 60 200

CB7080 8 70 to 80 200

CB90100 8 90 to 100 200

ASRCA38C 6 up to 65mm 200

HOLLOW WALL ANCHOR PG 0500

Item Code Thread Size Wall Thickness (mm) Pack Qty

HW05M4 M4 Up to 5 100

HW10M4 M4 6 – 10 100

HW10M4P M4 6 – 10 100

HW13M4 M4 8 – 13 100

HW24M4 M4 16 - 24 100

HW38M4 M4 34 - 38 100

HW14M5 M5 7 – 14 100

HW16M6 M6 6 – 16 100

HOLLOW WALL ANCHOR SETTING TOOL PG580


SETHWG 1

ToggleMate™ and WallMate™ PG 0500

Item CodeScrew Gauge x Min.

Screw Length (mm)

Wall Thickness

(mm)Pack Qty

TM16 8 x 20 10 – 13 50

WMZ 8 x 20 10 – 12 100

WM25 6 - 8 x 20 10 – 12 100

l Carbon Steel Zinc Plated

Hand Setting Tool - Gun



RamToggle™ PG 0500

Item Code Hole Size (mm) Wall Thickness (mm) Pack Qty

RT10 8 5 – 10 100

RT12 8 8 – 12 100

RT16 8 12 – 18 100

SPRING TOGGLE PG 0500

Item Code Pack Qty

STR04050 100

STR05050 100

STF05050 100

STR05075 50

STF05075 50

STR05100 50

HOOK TOGGLE PG 0500

Item Code Pack Qty

STK05050 50

WALL GRABB'RTM PG 0500

Item CodeScrew Length (mm) x

GaugeWall Thickness (mm) Pack Qty

GP16 30 x 8 16 100

NYLON ANCHORS lPG 0503/ uPG 0318

Item CodeAnchor Size (mm) x

Anchor Length (mm)Head Type Pack Qty

l TNM325 5 x 25 Mushroom 100

u TNM325SS 5 x 25 Mushroom 100

l TNR325 5 x 25 Round 100

u TNR325SS 5 x 25 Round 100

l TNL325 5 x 25 Flat 100

l TNR338 5 x 38 Round 100

l TNF425 6.5 x 25 Countersunk 100

l TNM425 6.5 x 25 Mushroom 100

u TNM425SS 6.5 x 25 Mushroom 100

l TNR425 6.5 x 25 Round 100



l TNR438 6.5 x 38 Round 100



l TNR450 6.5 x 50 Round 100



1/8" x 50

3/16" x 50

3/16" x 50

3/16" x 75

3/16" x 75

Screw Gauge x Screw Length (mm)

3/16" x 100

Screw Gauge x Screw Length (mm)

3/16" x 50




EasyDriveTM

ANCHORS lPG 0503/ uPG 0318

Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

l ED05033 5 33 100

u ED05033SS 5 33 100

l ED05050 5 50 100

l ED06042 6 42 100

u ED06042SS 6 42 100

l ED06055 6 55 100

u ED06055SS 6 55 100

l ED06075 6 75 100

u ED06075SS 6 75 100

l ED08080 8 80 50

l ED08120 8 120 50

PLASTIC SPAGHETTI PG 0515

Item CodeDrill Size

(mm)Pack Qty Metres

RSP 5 50

463609 5 5

PLASTIC PLUGS (FRAME PACKS) PG 0506

Item CodeLength (mm) x Drill

Size (mm)Colour Pack Qty

WPWH25 25 x 5 White 1000

WPRD25 25 x 6 Red 1000

WPRD32 32 x 6 Red 1000

WPRD38 38 x 6 Red 1000

WPRD50 50 x 6 Red 1000

WPGR25 25 x 7 Green 1000




WPBU38 38 x 8 Blue 500

WPBU50 50 x 8 Blue 500

ROLL PLUGS PG 0506

Item CodeLength (m) x Drill Size

(mm)Colour Roll Qty

720115 100 x 6 Red 1

720122 100 x 7 Green 1

720139 100 x 8 Blue 1




CONCRETERS AND BUILDERS ACCESSORIES

FERRULES - STILETTO ROUND BAR

Item CodeThread Size x Thread

Length (mm)

Ferrule Length

(mm)Pack Qty

l FS16070 M16 x 32 70 50

n FS16070GH M16 x 32 70 50

l FS16095 M16 x 39 95 50

n FS16095GH M16 x 39 95 50

l FS20070 M20 x 32 70 50

n FS20070GH M20 x 32 70 50

l FS20095 M20 x 39 95 50

n FS20095GH M20 x 39 95 50

FERRULES - ELEPHANT FEET


Length (mm)

Ferrule Length

(mm)Pack Qty

l FE10045 M10 x 20 45 250

l FE12055 M12 x 25 55 200

n FE12055GH M12 x 25 55 200

l FE12095 M12 x 25 95 100

n FE12095GH M12 x 25 95 100

l FE16070 M16 x 32 70 100

n FE16070GH M16 x 32 70 100

l FE16095 M16 x 32 95 75

n FE16095GH M16 x 32 95 75

l FE20070 M20 x 32 70 75

n FE20070GH M20 x 32 70 75

l FE20095 M20 x 38 95 50

n FE20095GH M20 x 38 95 50

l FE24095 M24 x 50 95 40

n FE24095GH M24 x 50 95 40

FERRULES - STAINLESS STEEL


Length (mm)

Ferrule Length

(mm)Pack Qty

u FE10045SS M10 x 20 45 250

u FE12055SS M12 x 25 55 200

u FE16070SS M16 x 32 70 100

u FE20095SS M20 x 45 95 50

RAMSETTM

STORAGE


RFB 1


RamsetTM

Fastener Box

Products on pgs 33 & 34 also distributed by ReidTM



FERRULE ACCESSORIES

Item Code Description Thread Size Pack Qty

FM12N Nailing Plate - RED M12 100

FM16N Nailing Plate - GREEN M16 100

FM20N Nailing Plate - BLUE M20 100

FM24N Nailing Plate - YELLOW M24 100

FWSC125 50

FWSC150 50

FWSC175 50

FWSC200 50

FSC25 50

FSC50 50

FSC75 50

FSC100 50

SWIFTSHIM

Item Code Thickness Pack Qty

SHIM01 1mm 100

SHIM02 2mm 200

SHIM03 3mm 100

SHIM05 5mm 100

SHIM10 10mm 40

SHIM15 15mm 40

SHIM20 20mm 30

ACCESSORIES


BBLSL20 Bondbreaker LS 20Litre

BBLSL205 Bondbreaker LS 200Litre

RPPS01 Hand Spraying Unit 1

RBH 1

DSR16 25

DSR20 25

RPF 75m

RFF 75m

RPFJ 30m

RFFJ 30m

PFC Fillet Shear 1

Stiletto Ferrule Chair - 50mm


Stiletto Ferrule Chair -100mm

Panel False Joint (40mm x 12mm) - 3 metre length

Support Chair - 150mm



Form False Joint (40mm x 12mm) - 3 metre length



Dowelsert to suit 16 diam Round Bar

Dowelsert to suit 20 diam Round Bar

Panel Fillet (12mm x 12mm) - 3 metre length

Rambar Leverage Tool

Form Fillet (17mm x 17mm) - 3 metre length



CHEMICAL ANCHORINGChemSet™ 101 General Purpose Polyester Anchoring Adhesive PG 0403


ISKP 10

C101J 12

C101C 20

ISNP 5

* Kit consists of 2 x 380 ml cartridges + 4 x mixer nozzles

ChemSet™ 801 Heavy Duty Epoxy Anchoring Adhesive PG 0403


C801C 24

C801J 12

ISNE 5

ChemSet™ Reo502™ Extra Heavy Duty Epoxy Anchoring Adhesive PG 0404


REO502J 12

ISNE 5

ISNET 5

ChemSet™ Maxima™ Anchoring Capsules PG 0400

Item Code Anchor Size (mm) Pack Qty

CHEM08 M8 10

CHEM10 M10 10

CHEM12 M12 10

CHEM16 M16 10

CHEM2024 M20 & M24 6

PG 0440

Item CodeSleeve Length (mm) x

Drill Size (mm)To Suit Stud Pack Qty

ISS08 64 x 12 M8 100

ISS10 64 x 14 M10 100

ISS12 64 x 16 M12 100

ChemSet™ Metal Mesh Sieves for Hollow Masonry Anchoring with ChemSet™ 101 PG 0440

Item CodeSleeve Length (mm) x

Drill Size (mm)To Suit Stud Pack Qty

ISM10 1000 x 12 M6/M8 1

ISM12 1000 x 16 M10/M12 1

ISM16 1000 x 22 M16 1

Mixer nozzles for Reo502™ Fast Dispensing

ChemSet™ 801 Jumbo (750ml) + Mixer Nozzle

Mixer Nozzle for ChemSet™ 101

ChemSet™ Reo502™ (750ml) + Mixer Nozzle

Mixer nozzles for Reo502™

ChemSet™ Nylon Sleeves for Hollow Masonry Anchoring with ChemSet™ 101

Mixer Nozzle for ChemSet™801

Standard ChemSet™ 101 Kit*

ChemSet™ 101 Jumbo (750ml) + Mixer Nozzle

ChemSet™ 801 Cartridge (380ml) + Mixer Nozzle

ChemSet™ 101 Cartridge (380ml) + Mixer Nozzle



ChemSet™ Retaining Collars for Overhead Anchoring with ChemSet™ 101 PG 0440

Item Code Anchor Size (mm) To Suit Anchor Pack Qty

ISR10 10 CS10130 100

ISR12 12 CS12160 100

ISR16 16 CS16190 100

REMEDIAL BRICK WALL TIES (for use with ChemSet™ 101) PG 0440

Item Code MaterialAnchor Length

(mm)Pack Qty

RA225 Nylon 220 100

ChemSet™ ANCHOR STUDS l PG 0406/ n PG 0320/ u PG 0318


Thread SizePack Qty

l CS08110 8 110 x M8 10

n CS08110GH 8 110 x M8 10

u CS08110SS 8 110 x M8 10

l CS10130 10 130 x M10 10

n CS10130GH 10 130 x M10 10

u CS10130SS 10 130 x M10 10

l CS12160 12 160 x M12 10

n CS12160GH 12 160 x M12 10

u CS12160SS 12 160 x M12 10

l CS12180 12 180 x M12 10

l CS16190 16 190 x M16 10

n CS16190GH 16 190 x M16 10

u CS16190SS 16 190 x M16 10

l CS20260 20 260 x M20 6

n CS20260GH 20 260 x M20 6

u CS20260SS 20 260 x M20 6

l CS24300 24 300 x M24 6

n CS24300GH 24 300 x M24 6

u CS24300SS 24 300 x M24 6

Threaded Inserts - Internally Threaded Anchors PG0404


Thread SizePack Qty

l 062770 8 60 x M8 10

u 062860 8 60 x M8 10

l 062480 10 65 x M10 10

u 062960 10 65 x M10 10

l 062760 12 75 x M12 10

u 063100 12 75 x M12 10

l 062800 16 125 x M16 10

u 051175 16 125 x M16 10

l 062810 20 170 x M20 10




ChemSet™ SYSTEMS APPLICATORS PG 0403


CUA Chemset™ Universal Applicator* 1

CUAPN 1

C380A 1

*For dispensing ChemSet™ 101, ChemSet™ 801 and ChemSet™ Reo 502™ Cartridges

**For dispensing ChemSet™ 101 380 ml Cartridge (C101C)

ChemSet™ HOLE CLEANING ACCESSORIES PG 0440

Item Code Anchor Size (mm) Description Pack Qty

HCBT13 8 – 12 Brush 1

HCBT20 16 - 20 Brush 1

HCBT26 20 - 24 Brush 1

HCP - Dust Blower 1

HCPHV - High Volume Dust Blower 1

For cleaning dust from holes in concrete

ChemSet™ Anchoring Kit


CHEMKITBAG Tool bag, CUA, HCPHV,HCBT13,HCBT20,HCBT26 1

Pneumatic Universal Applicator*

Chemset™ Applicator 380ml**



RAMSET™ SCREWS PG 1050

Item Code GaugeScrew Length

(mm)Order Qty

l RSC08025YSF 8 25 1000

l RSC08028YSF 8 28 1000

l RSC08035YSF 8 35 1000

l RSC08041YSF 8 41 1000

l RSC08045YSF 8 45 1000

l RSC08051YSF 8 51 1000

PG 1040


(mm)Order Qty

l RSN06025YBT 6 25 1000

l RSN06030YBT 6 30 1000

l RSN06041YBT 6 41 1000

l RSN08065YBT 8 65 1000

PG 1044

Item Code Gauge - PitchScrew Length

(mm)Order Qty

l RSD06025YBB 6 – 20 25 1000

l RSD06030YBB 6 – 20 30 1000

l RSD06045YBB 6 – 20 45 1000

PLASTERBOARD SCREWS - COLLATED NEEDLE POINT TWINFAST THREAD


(mm)Order Qty

l RSN06025YBTC 6 25 1000

l RSN06032YBTC 6 32 1000

l RSN06041YBTC 6 41 1000

PLASTERBOARD SCREWS - COLLATED DRILL POINT TWINFAST THREAD


(mm)Order Qty

l RSD06025YBTC 6 25 1000

l RSD06032YBTC 6 32 1000

l RSD06041YBTC 6 41 1000

CHIPBOARD SCREWS - COUNTERSUNK SELF EMBEDDING HEAD COARSE THREAD

PLASTERBOARD SCREWS - BUGLE HEAD DRILL POINT TWINFAST THREAD

l Carbon Steel Zinc Plated

PLASTERBOARD SCREWS - BUGLE HEAD NEEDLE POINT TWINFAST THREAD



PLASTERBOARD SCREWS - BUGLE HEAD NEEDLE POINT COARSE THREAD PG 1042


(mm)Order Qty

l RSN07025YBF 7 25 1000

l RSN07030YBF 7 30 1000

l RSN10038YBF 10 38 1000

PG 1005


(mm)Order Qty

l RSN08012YLT 8 – 15 12 1000

l RSN08016YLT 8 – 15 16 1000

l RSN08025YLT 8 – 15 25 1000

l RSN08032YLT 8 – 15 32 1000

PG 1010


(mm)Order Qty

v RQ512032MHC 12 – 24 32 1000

v RQ512050MHC 12 – 24 50 1000

PG 1003


(mm)Order Qty

l RSD08012YLB 8 – 18 12 1000

l RSD08016YLB 8 – 18 16 1000

METAL SCREWS - WAFER HEAD DRILL POINT PG 1003


(mm)Order Qty

l RSD08012YWB 8 – 18 12 1000

l RSD10016YWB 10 – 16 16 1000

METAL SCREWS - HEX WASHER SERIES 5 EXTENDED DRILL POINT

METAL SCREWS - LARGE WAFER (TRUSS) HEAD DRILL POINT

CABINET SCREWS - LARGE WAFER (TRUSS HEAD) NEEDLE POINT TWINFAST THREAD

l Carbon Steel Zinc Plated v XP3TM

AS3566 Class 3



PG 1003


(mm)Order Qty

l RSDSHZY1016 10 – 16 16 1000

l RNPSHZY1016 10 – 16 16 1000

PG 1007


(mm)Order Qty

l RSN08020YST 8 20 1000

lPG 1002 / vPG 1013


(mm)Order Qty

l RSD06050YSBW 6 – 20 50 1000

v RSD08022MSBW 8 – 18 22 1000

v RSD08032MSBW 8 – 18 32 1000

v RSD08040MSBW 8 – 18 40 1000

l RSD10045YSBW 10 – 16 45 1000

l Carbon Steel Zinc Plated v XP3TM

AS3566 Class 3

CEMENT SHEET SCREWS - COUNTERSUNK SELF EMBEDDING WINGED DRILL POINT

METAL SCREWS - FLAT HEAD DRILL AND NEEDLE POINT

CEMENT SHEET SCREWS - COUNTERSUNK SELF EMBEDDING HEAD NEEDLE POINT TWINFAST THREAD



CONSTRUCTION CHEMICALS

SEALANTS

Item Code Colour Pack Size Carton Qty

ROOF SEAL NEUTRAL CURE ROOFING & PLUMBING SILICONE PG 0800

RFSLTRG300 Translucent 300 ml 20

RFSLALG300 Aluminium 300 ml 20

RFSLGYG410 Grey 300 ml 20

WATER SEAL ACETIC CURE SANITARY SILICONE PG 0800

WRSLWHG300 White 300 ml 20

WRSLTRG300 Translucent 300 ml 20

HiSeal™ POLYURETHANE CONSTRUCTION SEALANT PG 0800

HYSLGYG375 Grey 300 ml 25

HYSLGYG720 Grey 600 ml 20

DynaSeal™ URETHANE ACRYLIC CONSTRUCTION SEALANT PG 0800

DYSLGRG450 Grey 300 ml 20

DYSLGYG900 Grey 600 ml 15

BlazeBrake™ 201 ACRYLIC FIRE RATED SEALANT PG 0800

BLBRGYC Grey 300 ml 20

BLBRGYS Grey 600 ml 15

FyreBrake™ POLYURETHANE FIRE RATED SEALANT PG 0800

FYBRGYS Grey 600ml 12

DuctSeal™ ACRYLIC SEALANT FOR DUCTWORK PG 0800

DSLWG450 Grey 300 ml 20

GAP SEAL PAINTABLE GAP SEALANT PG 0800

GPSLWHG450 White 300 ml 20



BARREL GUN, CAULKING GUNS AND ACCESSORIES FOR SEALANTS PG 0880

Item Code Description Carton Qty

CAGU850 1

CAGU300 1

SABGU37 1

BGUNS Nozzle Set Assorted for SABGU37 (Pack of 5) 1

BGUNOZ Nozzle Set Natural for SABGU37 (Pack of 10) 1

POLYETHYLENE CLOSED CELL FOAM BACKER ROD PG 0824

Item Code ColourDiameter

(mm)Length (m)

BRPE06 White 6 250

BRPE10 White 10 250

BRPE13 White 13 50

BRPE15 White 15 50

BRPE20 White 20 50

BRPE25 White 25 2

BRPE30 White 30 2

BRPE40 White 40 2

BRPE50 White 50 2

HORSE SHOE SHIMS PG 0824

Item Code ColourProduct Size

(mm)Carton Qty Bag

SHIM01575 Brown 75 x 37 x 1.5 (52 x 13) 1000

SHIM0375 Green 75 x 37 x 3 (52 x 13) 1000

SHIM0575 Yellow 75 x 37 x 5 (52x13) 1000

SHIM06575 White 75 x 37 x 6.5 (52x13) 500

SHIM1075 Black 75 x 37 x 10 (52x13) 500

SHIM01590 Brown 90 x 37 x 1.5 (66 x 13) 1000

SHIM0390 Green 90 x 37 x 3 (66 x 13) 1000

SHIM0590 Yellow 90 x 37 x 5 (66 x 13) 1000

SHIM1090 Black 90 x 37 x 10 (66 x 13) 500

ADHESIVES

NailFree™ Construction Adhesive PG 0821

Item Code Description Pack Size Carton Qty

NFCAG320 300 ml Cartridge 300 ml 10

NFCAG930 900 ml Cartridge 900 ml 10

Caulking Gun for 850ml / 900 ml Cart.

Caulking Gun for 300ml Cart.

37cm Barrel Gun for sealant sausages



SAFE-T-BOND™ Water Clean Up Construction Adhesive PG 0821


STBDL1 1 L Sachet 1 Litre 10

Ramset™ Fomofill™ Self-Expanding Gap Filling Foam PG 0803


FMFLG500 Fomofill™ 500 ml 12

FMFLG750 Fomofill™ 750 ml 12

FomoPlus™ Applicator Foam PG 0803


FMPLG750 Fomoplus™ 750 ml Canister 12

FMPLGU Fomoplus™ Applicator Gun 1

FMPLGU300 1

Fomo™ Aerosol Solvent Cleaner for FomoPlus™ Applicators


FMSVM500 Fomo™ Solvent 500 ml 12

CONCRETE REPAIR

Item Code Colour Pack Size Carton Qty

Epoxy Putty - Epoxy Repair Compound for Concrete PG 0815

EPPYL1 Grey 1 litre 1




Epoxy Patch - Pourable Epoxy Resin for Concrete Repair PG 0815

EPPHL1 Amber 1 litre 1



Epoxy Grout - Epoxy Grouting Compound PG 0815

EPGRL2 Grey 2 litre 1



Fomoplus™ Applicator Gun Metal



CEMENTITIOUS GROUTS PG 0812

Item Code Description Pack Size Qty

RPGMP Premier Grout MP 20kg 1

830104Ultrafix™

Concremate™10kg 1

830111Ultrafix™

Concremate™25kg 1

Fine Grade Filler for Epoxy Patch and Epoxy Grout PG 0812


RFLFG Fine Grade Fillers 20kg 1

Mixing Paddles for Grouts and Epoxies PG 0880

Item Code Description Qty

SSMP Small Spiral Mixing Paddle 1

LSMP Large Spiral Mixing Paddle 1

CONCRETE ADDITIVES


CemCrete™ Bonding and Sealing Agent PG 0809

CMCRL5 Cemcrete™ 5 litre 1

CMCRL20 Cemcrete™ 20 litre 1

Concrebond™ Acrylic Bonding and Sealing Agent PG 0809

CNBDL20 Concrebond™ 20 litre 1



FIRE PROTECTION AND SUSPENSION SYSTEMSFIRE PROTECTION OF PIPE PENETRATIONS

RAMSETTM

FIRE COLLARS CAST IN STACKWORK (TALLS) PG0724

Item Code Pipe TypeDiameter Size

(mm)Carton Qty

RFCH65S PVC/HDPE PPR PVC 40/50/65. HDPE 75. PPR32/40/50/65/75 30

RFCH100S PVC/HDPE PP/PPR PVC 80/90/100. HDPE 100. PP100. PPR 90/110 18

RFCH150S PVC/PE PVC 150. PE 150. 4

RAMSETTM

FIRE COLLARS CAST IN STACKWORK (SHORT)


(mm)Carton Qty

RFCL40S PVC / PPR PVC 40. PPR32/40 90

RFCL50S PVC / PPR PVC 50. PPR50 90




RFCL100S PVC/HDPE/PP/PPR PVC 100. HDPE100. PP100. PPR110 50

RAMSETTM

FIRE COLLARS RETROFIT STACKWORK (LOW PROFILE)


(mm)Carton Qty

RFC100R PVC/HDPE PVC 80/90/100. HDPE 100. PPR 100 (WALL). PE 100 (WALL) 8

RFC65R PVC PVC 40/50/65. PVC 50 (WALL) 24

Consult technical data for tested applications and fire ratings before comencing use. Go to www.ramset.com.au.

FIRE COLLARS CAST IN STACKWORK (TALLS) PG0724


(mm)Carton Qty

SNAPH50S PVC 40/50 60

SNAPH100S PVC/HDPE 65/80/90/100 18

SNAPH150S PVC/HDPE/PPR/PE 150 1

PG0724

FIRE COLLARS CAST IN -FLOOR WASTE (TALLS)


(mm)Carton Qty

SNAPH50FWS PVC/HDPE/ PPR/PE 40/50 60




FIRE COLLARS CAST IN -FLOOR WASTE (SHORT) PG0724


(mm)Carton Qty

SNAPL80FWS PVC/HDPE/ PPR/PE 80 24

SNAPL100FWS PVC/HDPE/ PPR/PE 100 24

FIRE COLLARS RETROFIT (STEEL) LOW PROFILE PG0724

FLOORWASTE AND STACKWORK


(mm)Carton Qty

SNAPLP100R PVC 65/80/90/100 2

FSC50B PVC/HDPE 40/50 1

FIRE RATED EXPANDING PU FOAM PG0724

Item Code Size Description Carton Qty

FRF700 750 ml BlazeBrake™ FR Foam 12


ALLTHREAD ROD AND ACCESSORIES

ALLTHREAD ROD PG 0721

Item Code Thread SizeThread Length

(mm)Pack Qty

RTRM10L3 M10 3000 10

RTRM12L3 M12 3000 10

NUTS / WASHERS PG 0724

Item Code Thread Size Description Pack Qty

HNM10 M10 HEX NUT ZP 200

HNM12 M12 HEX NUT ZP 200

RWM10Suit M10

(25mm OD)Round Washer ZP 200

RWM12Suit M12

(28mm OD)Round Washer ZP 200

COUPLINGS PG 0721

Item Code Thread SizeThread Length

(mm)Pack Qty

RTCM10 M10 30 50



CHANNEL PROFILES, SUPPORTS AND ACCESSORIES

COMBINATION CLIP (Channel and individual mount) PG0724

Item Code DescriptionDiameter Size

(mm)Carton Qty

363015 Combination Clip 15-16 100




363050 Combination Clip 50 50

CHANNEL PERFORATED (GALV) PG0724

Item Code Description Length Pack Qty

333030RA 12

RAPID CHANNEL RAIL BOLT PG0724

Item Code Description Thread Size x Length Carton Qty

334930 100

RAPID ISOPHONIC CLAMP M8/M10 (Standard Duty) PG0724

Item Code Carton Qty

114020 50

114025 50

114033 50

114036 25

114042 25

114052 25

114060 25

114075 25

114090 25

114110 25

ISOPHONIC CLAMP M8/M10 (Heavy Duty) PG0724

Item Code Carton Qty

115054 25

115070 25

115083 25

115100 25

115110 25

115160 25

Rail Bolt (27/18mm) M10 x 30mm

Channel perf (27/18mm) 2 Metres

Rapid Isophonic M8/M10 57-60



Isophonic M8/M10 53-56

Description Diameter Size (mm)



Description Diameter Size (mm)













SURFACE MOUNT PLATES PG0724

Item Code Description Size (mm) Carton Qty

335122 Welded Nut Plate M8/M10 100

PG0724

Item Code DescriptionPack

Qty

RAP01 500

RAP02 500

RAP12 200

PG0724


AS06035R 50

AS06035RM12 50

AS06035S 100

016708 1

016707 1

016709 1

921556 1

Elect.l Mech. Services Pk (200 x DSF12 + set tool)

AnkaScrewTM

ROD 6 x 35mm M10

AnkaScrewTM

STUD 6 x 35mm M8

Hex Impact Socket (long) 13mm for AS06035R

Hex Impact Socket (long) 10mm for AS06035S

SDS 1/2" Drive Socket Adaptor for DD528

Elect.l Mech. Services Pk (500 x DSF10 + set tool)

Serv. Pk (500 x AS05030H + 5/16" mag nutsetter)

AnkaScrewTM

SUSPENSION SYSTEM

Hex Impact Socket (long) 15mm for AS06035RM12

AnkaScrewTM

ROD 6 x 35mm M12

HEAVY DUTY ANCHORING (Channel & Individual Mount) PACKS





TERMS & CONDITIONS OF SALE1. DEFINITIONIn these Terms and Conditions of Sales:“Supplier” means Ramset Fasteners Australia and Reid Construction Systems, divisions of ITW Ramset Australia Pty Ltd ABN 48 004 297 009;“Customers” means any person who has placed an Order with the Supplier or request a Quotation from the Supplier;“Goods” means any goods and/or services requested by the Customer in an order“Terms” means these terms and conditions2. SALE PRICESPrices of Goods shall be the then current price charged by the Supplier as at the date of delivery of the Good. Prices are subject to change without notice.3. GSTThe Customer must pay to the Supplier any amount, which the Supplier is required to pay on account of any GST as a consequence of any supply made or deemed to be made in connection with this agreement. The GST amount must be calculated at the prevailing rate of GST imposed by the government.4. SMALL ORDER SURCHAGEA minimum “Small Order Surcharge” may apply unless otherwise advised in writing.5. DELIVERY CHARGEAll deliveries will incur a minimum delivery charge of $10.6. AVAILABILITY OF STOCKDeliveries at any time are subject to availability of stock, and the Supplier will not be liable for any charges due to product unavailability. No responsibility will be accepted for delays outside the supplier’s control.7. CREDIT TERMSInvoices must be paid in full no later then 30 days after the last day of the month in which the invoice was issued.Accounts exceeding their limit will be suspended until the account is paid in full.All cash sales transactions must be paid in full before stock is supplied to customer.7.1 WARRANTY INFORMATIONPlease refer to Ramset standard warranty procedures for clarification on warranty and fair wear and tear.8. COLLECTION AND LEGAL FEESIf the Customers breaches these Terms, the Customer must pay any collection, commission and/or legal fees charged by any party to recover any money due.9. RETURN OF GOODS a) Goods will not normally be accepted for return after (14) days from date of delivery. b) Acceptance of Goods returned does not imply agreement to issue a credit note. c) A credit note will only be issued if the returned Goods are in original packs and found to be satisfactory by the Supplier in saleable condition. Delivery charge and small order surcharge will not be credited. d) Freight on returns will be at the Customer’s expense. e) Customers will be subject up to a 20% handling and restocking charge, except in the case of Supplier error, or defective goods. 10. RESERVATION OF TITLEThe Supplier whilst parting with possession of the Goods shall retain title to those Goods and title shall only pass to the Customer when full payment in cleared fund is received by the Supplier. Until this happens: a) the relationship between the Supplier and Customer is a fiduciary one b) the Customer holds the Goods as bailee for the Supplier c) the Customer shall not assign its rights, title or interest in any book debts arising in its favour in respect of its sale of GoodsThe customer is however obligated to pay the proceeds of sale into a separate account pending payment to the Supplier. Until payment in full the Customer is obliged to store the Goods separately pending sale and must keep separate records of sales of Goods owned by the Supplier. In default of payment, title is to remain with the Supplier who shall have the right to repossess the Goods without notice to the Customer and for this purpose the parties agree that the Supplier may enter the property of the Customer and recover the Goods. The right to enter is without prejudice to any other rights of the Supplier deriving from these Terms of the general law.In the event that the Customer uses the Goods in some manufacturing or construction purposes of its own or some third party, then the Customer shall hold such part of the proceeds of such manufacturing or construction process as relates to the Goods in trust for the Supplier. Such part shall be deemed to equal in dollar terms the amount owing by the Customer to the Supplier at the time of the receipt of such proceeds.11. LIABILITY OF THE SUPPLIER (a) The Supplier will not be liable in respect of any loss or damages (including consequential loss or damage), howsoever caused (whether by negligence or otherwise), which may be suffered or incurred or which may arise directly or indirectly in respect of the Goods, howsoever acquired where any person has: (i) modified or in any way altered the Goods or changed the formulation or make-up of the Goods; (ii) failed to use the Goods in accordance with the instructions or recommendations of the Supplier published from time to time in connection with the use of the Goods; (iii) failed to use the Goods in accordance with any applicable laws or regulations. (b) The Supplier will not be under any liability in respect of any loss or damage (Including consequential loss or damage) however caused (whether by negligence or other wise) which may be suffered or incurred or which may arise directly or indirectly in respect of any technical advice or assistance given or rendered by it to the Customer whether or not in connection with the manufacture, preparation or supply of Goods and/or Services to the Customer, provided that the Supplier has provided such technical advise or assistance with due care and skill. c) Where any applicable legislation implies any term, condition or warranty into the relationship between the Supplier and the Customer or into these Terms and Conditions of Sale or a contract of sale between the Supplier and the Customer in relation to the sale or supply of Goods/Services, or otherwise gives the Customer a particular remedy the Supplier and that legislation or any legislation avoids or prohibits provisions excluding or modifying the application of, or exercise of, or liability under, such term, condition, warranty or remedy, then that term, condition, warranty or remedy shall be deemed to be included in these Terms and Conditions of Sale, or, as the case may be, apply to that relationship. However, the Supplier’s liability for any breach of such term, condition or warranty or under such remedy, shall be limited, at the Supplier’s option, in any one or more of the ways permitted by that legislation including, where so permitted: (i) if the breach relates to any Goods, to: (A) the replacement of those Goods or the supply of equivalent goods; (B) the repair of those Goods; (C) the payment of the cost of replacing those Goods or acquiring equivalent goods; or (D) the payment of the cost of having those Goods repaired; and (ii) if the breach relates to any Services to: (A) the supply of those Service again; or (B) the payment of the cost of hiving those Service supplied again (d) If there is any inconsistency between the express terms of these Conditions and any term, condition, warranty or remedy deemed to be included in these Conditions pursuant to sub-clause 9(c), that term, condition, warranty or remedy shall prevail to the extent of the inconsistency, (e) The description, illustrations and other material contained in the catalogue, price list, brochure, leaflet or other material provided by or on behalf of the Supplier shall not form part of these Conditions or any contract between the Supplier and the Customer for the supply of Goods or Services and shall not amount to any representation or warranty (whether collateral thereto or otherwise), nor shall the use of such material constitute a contract of sale by description. All Goods and Services supplied by the Supplier shall be in conformity with the Supplier’s standard commercial specifications at the time of supply, subject to the Supplier’s right without notice to incorporate such minor modifications thereto as it thinks fit or any modifications of whatever nature necessary to comply with any relevant law.12. PROPERTY AND RISKRisk in Goods shall pass to the Customer immediately upon delivery of the Goods by the Supplier.13. ACKNOWLEDGEMENTSThe Customers acknowledges that: (a) it has not relied on any representations made by the Supplier as to the suitability of the Goods for any specific purpose; and (b) it is its responsibility to make its own enquiries and investigations as to the suitability of the Goods for any particular purpose.14. GOVERNING LAWThese Conditions shall be governed by and construed in accordance with the laws in force in the State of Victoria, and the Supplier and the Customer submit to the jurisdiction of the courts of that State.

For terms and conditions go to www.ramset.com.au ITW Construction Systems Australia Pty. Ltd. ABN 48 004 297 009 trading as Ramset™™Trademarks of Cetram Pty. Ltd. used under licence by Ramset™ FP FireFixTM is a trademark of Perelli Cables Clipsal® is a registered trademark of Clipsal Australia Pty. Ltd. © Copyright 2011 RAM/Pg12/2010

Sales, Orders and Enquiries

Tel: 1300 780 063Fax: 1300 780 064Email: [email protected]: www.ramset.com.au

HEAD OFFICE296-298 Maroondah HighwayMooroolbark, Victoria 3138Tel: 03 9726 6222

STATE BRANCHESVICTORIA5/71 Victoria Crescent, Abbotsford 3067296-298 Maroondah Highway, Mooroolbark 3138

SOUTH AUSTRALIA115 Sir Donald Bradman Drive, Hilton 5033

NEW SOUTH WALES71 Carnarvon Street, Silverwater 2128563 Gardeners Road, Mascot 20203/8 Channel Road, Mayfield West 2034

ACT5/19 Tennant Street, Fyshwick 2609

QUEENSLAND281 Montague Road, West End 4101153 Ingham Road, Townsville 4810

WESTERN AUSTRALIA1/12 Colin Jamieson Drive, Welshpool 6106

ramset product guide 2011 v1

Documents

accessories power tools

accessories pipe clamps

item code shank length

pack qtyc925c

pack qtyldu25

head diameter

foams concrete repair

additives cementitious