raptor odor control installation - hydroponics group · 2014-08-07 · assemble grow box , leaving...
TRANSCRIPT
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
assemble grow box , leaving out the planting shelf
locate the circular connection on top of the rear grow box roof
locate the extra large zip ties included & af�x loosely to the eyelet connnector on roof. Leave more than enough room to slip the �lter in place
place left side of �lter through the zip tie on left and same for the right zip tie
tighten zip ties easily and clip excess so that the �lter is snug to the ceiling
connect ducting and tubing with pipe clamps and your raptor is installed
see image 1
see image 1
see image 2 & 3
see image 4 & 5