Raspberry Pi Products

& Accessories

BotnLife - Online Thailand Shop for

Wearable Hi-tech Electronics Devices

& Raspberry Pi Products

Raspberry Pi Model B + 512MB RAM

Raspberry Pi Model B + 512MB RAM

• Raspberry Pi Raspberry Pie-board computer was developed

in England to build a learning computer. Designed by Broadcom BCM 2 835 System on a Chip (SoC) processors, ARM 1176th JZF-S 700 MHz, VideoCore IV GPU, and memory size. 512 MB paddle designed without memory. (Hard disk drive or solid-state drives), but rely on the SD card to boot and to a storage unit.

• Raspberry Pi Model B + upgrade from the original. The port USB rise ,increasing pin GPIO, improve the capacity to better , more holes drilled four holes for assembly and numerous other teams called raspberry pie, take suggestions. Collected over three years to develop the model B +this. And the same price!

Raspberry Pi Model B+ Starter Pack

Raspberry Pi Model B+ Starter Pack

• You are about to start a project out of the rowing course you have to solder, without programming. They must also wear a heart inventor and much more, we need to start your first step is very simple. We collect the devices that we think is best for a beginner kit is easy to use.

• This unit will gather important such as the power unit, Raspbian SD card, Case, WiFi adapter, console cable, and other components for the initial prototype for this is the crucial point that you begin to jump.

• Accessories are not included in the Raspberry Pie B +!

Pibow Coupé - Enclosure for Raspberry Pi

Model B+ Computers

Pibow Coupé - Enclosure for

Raspberry Pi Model B+ Computers

• Case Pibow Coupé design for protecting raspberry pie

Model B + with a slim and transparent acrylic cover on

top of the pie for show.

• Produced by the use of laser-cut acrylic and be stacked

to protect your pie. You can also access the main GPIO

ports and the camera has the same case Coupé weighs

only 61 grams, extremely light.

• This case is not designed to be used with the Model A

and B when ordering, you will receive only the case for

excluding the raspberry pie.

Rainbow Pibow - Enclosure for

Raspberry Pi Model B+

Rainbow Pibow - Enclosure for

Raspberry Pi Model B+

• Customize your pie with a rainbow Rainbow Pibow Enclosure This case is the case with rich colors. Raspberry pie for protecting your B +.

• Produced by the use of laser-cut acrylic and be stacked to protect your pie. And closed with a final layer of clear acrylic. Make timeless, durable and distinguished by colors. The case is lightweight and can be attached to any surface. You can also access the camera and GPIO port is unchanged.

• This case is not designed to be used with the Model A and B when ordering, you will receive only the case for excluding the raspberry pie.

HDMI 4 Pi - 7" Display 1280x800 (720p)

IPS - HDMI/VGA/PAL/NTSC

HDMI 4 Pi - 7" Display 1280x800

(720p) IPS - HDMI/VGA/PAL/NTSC • TV screen resolutions up to 1280x800 for pies screen 7

"(17.8 cm) and easy to connect via the DC transformer. And connect the digital via HDMI or VGA control buttons on the front for you to adjust the brightness, color, contrast with your purchase, you get a screen, transformers, and stand, which can be assembled by using 4 screws. and the bottom has a compartment for connecting the camera to a 1 / 4-20 In addition to sharing the pie then. You can also work with other devices through HDMI, VGA or NTSC / PAL output for connection to the site. You can adjust the config.txt more details, read more here.

• You can connect to a 5-24V DC power from the transformer 9VDC you get when ordering.

HDMI 4 Pi: 5" Display (no Touch)

w/Mini Driver - 800x480 HDMI

HDMI 4 Pi: 5" Display (no Touch)

w/Mini Driver - 800x480 HDMI • A monitor screen size of 5 "high resolution 800x480 for

embedded system wants to monitor small and affordable. Designed to screen works with a driver board that can draw power from a USB port, the TTL with the board works with HDMI, which can be connected to a paddle, or HDMI device, such as BeagleBone Black can be used immediately when connected via USB. to supply 5V, 500mA.

• Because non-IPS (In Plane Switching) makes it ideal for a straight-sided only. If you want to view multiple angles We suggest you use the HDMI IPS 7 "or 10".

• The controller that comes with the PCB to adjust the brightness, color, contrast, and is available as a signal input as well.

• In addition to sharing the pie then. You can also work with other devices through an HDMI connection with a paddle.

Raspberry Pi

Products & Accessories

Raspberry Pi

Products & Accessories Order Online

If you have any questions, need advice or Order, Payment

Bots and Lifestyle Ltd

✔ Address: 51/9 Moo 7. Rat Development (Bangkok) Road

/ Saphan Sung Bangkok 10240, Thailand

✔ Web: www.botnlife.com

✔ Email: customercare@botnlife.com

✔ Line ID: botnlife

✔ Phone: 0972584994

✔ Facebook Page: www.facebook.com/botnlife