rayonled lighting international inc ul led panel light 50w ... · - light guide plate in 3mm...
TRANSCRIPT
- UL Listed Class P Type# Lifud’s LED Driver with UL/cUL# E477177;
- PF>0.9, Power Efficiency > 0.88, CRI > 80;
- Perfect Light Uniformity, LM-80-rated SMD2835 LED Chips, Up to 110LM/W ;
- Saving more than 80% energy compared with traditional grid fixtures.
- Light Guide Plate in 3mm thickness, imported from Taiwan;
- Approved from UL/cUL#E477177, DLC,ROHS, etc.
- 5 years warranty.
Page 1 of 6
1.Product Description
E477177
Rayonled Lighting International Inc
UL LED Panel Light 50W Specification
(DLC4.0 Standard)
10
.6m
m
60
3m
m
45
mm
2.Product Specification
front view side view
1213mm
Size(Ft) 2X2 2X4
Power Consumption(W) 25 40 50 40 50 60 72
Lumen Output(LM) 2625±5% 4200±5% 5250±5% 4200±5% 5250±5% 6300±5% 7560±5%
Light Efficacy (lm/W) 105±5%
CCT(K) 3045 175K 3465 245K 3985 275K 4503 243 5028 283 ± ± ± ± K ± K
Color Rendering Index(CRI) >80
AC Input Rating(Vac) AC 100-277V 50/60Hz
Dimming(Non-dimming,0-10V) Optional
PF ≥0.90
Page 2 of 6
front view side view
1213mm
30
0m
m 10
.6m
m
45
mm
3.Dimension
60
3m
m
603mm side view
10
.6m
m
45
mm
front view
Luminous Decay Graph
Data Set 1, 55℃,60mA(Chromaticity Shift)
%L
um
ino
us
Flu
xC
hro
ma
ticity S
hift(D
u’v
’)
u’v’
Connection Mode
OUTPUT
LED-
LED+
GND
AC-LAC-L
AC-NAC-N
OUTPUTLED-
LED+
GNDAC-L
INPUT
AC-L
AC-NAC-N
INPUT
Non-dimmable Driver
OUTPUT
LED-LED+DIM+DIM-
GND
AC-LAC-LAC-N
AC-N
OUTPUTLED-LED+DIM+DIM-
GND
AC-LAC-L
AC-NAC-N
INPUT
INPUT
Dimming Driver
Page 4 of 6
5.Installation Guide
Build-in
Connect LED panel light by the hook of suspension wire
5
LED Driver B
ox
Suspended
Page 5 of 6
Surface Mount
Page 6 of 6
6.Package
Item N.W.CARTONSIZE(cm)
Qty. G.W.
20GPcontainer can load
(Qty)
40HQcontainer can load
(Qty)
2X2 FT 3.8kg/pc 68x70x25 4pcs/CTN 19.0kg/CTN 996 2244
1X4 FT 3.7kg/pc 129x40x25 4pcs/CTN 18.5kg/CTN 852 2156
2X4 FT 7.3kg/pc 129x70x25 4pcs/CTN 35.2kg/CTN 512 1204
① Assemble the mounting frame withthe 8 screws(included). ② .
Make sure that the wire is long enough for Step4Mount the frame on the ceiling with screws(not included)
③ REMOVE one side of the mounting frame.
After mounting the frame on ceiling, ④ Then,slide in the LED panel unit to the frame.
Connect the wires from mains to the LED driver.
⑤ Put back the side on removed frame.
Warning:Disconnect power during installation