rbs epoxy mortar lw hs 2014
DESCRIPTION
base materialTRANSCRIPT
MATERIAL
SAFETY DATA SHEET
March 2014
rbs Epoxy Mortar LW Page 1 of 6
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY
Product rbs Epoxy Mortar LW Hardener Component Company Name Resapol Ltd
Unit E8 Aspul Court
Moss Industrial Estate Leigh
Lancashire
WN7 3PT
Tel: +44 (0) 1942 609001
Fax: +44 (0) 1942 609006
www.resapol.com
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous
Ingredients
Mixture of Epoxy Resin and reactive diluent
Name EC No CAS –No Content Symbol R
Phrase
Bisphenol
A=Epichlorhydrin Resin
with no. average M.W.=700
500-
006-
8
028064-14-4 40-50% Xi,N R36/38
R43
R51 R53
Bisphenol F = Epoxy Resin 9003-36-5 16-18% Xi N R36/38
R43
R51
R53
C12-C14 aliphatic Glycidyl
Ether
68609-97-2 8-15% Xi,N R36/38
R43
R51 R53
3. HAZARDS INDENTIFICATION
Main Hazards Irritating to eyes and skin. May cause sensitisation by skin contact. Not classified as flammable
but will burn.
4. FIRST AID MEASURES
Skin contact
Eye contact
Ingestion
Inhalation
Remove contaminated clothing immediately. Rinse affected skin with copious amounts of soap and water. If persistent irritation occurs obtain medical attention.
Immediately flush eyes with running water for at least 15 minutes without interruption. Seek
medical advice. DO NOT induce vomiting. If rapid recovery does not occur obtain medical attention.
No specific measures. Remove to fresh air in case of indisposition.
5. FIRE-FIGHTING MEASURES
Extinguishing media Exposure hazards
Protection of fire-
fighters
Dry powder, Carbon Dioxide, Water spray. Carbon Monoxide may be evolved if incomplete combustion occurs.
Wear full protective clothing and self contained breathing apparatus.
MATERIAL
SAFETY DATA SHEET
March 2014
rbs Epoxy Mortar LW Page 2 of 6
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Environmental
precautions
Clean-up
procedures
Avoid skin, eye and clothing contact. Provide sufficient ventilation during use. Prevent from entering sewer system, surface water or soil. Prevent from spreading into drains,
ditches or rivers by using sand, earth or other appropriate barriers
Soak up with absorbent material e.g. dry sand, vermiculite, and dispose of as instructed
Shovel up and place in a labeled, sealable container for subsequent disposal.
7. HANDLING AND STORAGE
Handling
requirements
Storage conditions Suitable packaging
Use in well ventilated areas. Keep containers tightly closed when not in use. Avoid contact with
skin, eyes and clothing. Avoid temperatures below 5°C.
Store at ambient temperatures. Must only be kept in original packaging.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering measures
Hand protection
Eye protection
Skin protection
Ensure there is sufficient ventilation of the area.
Protective gloves of PVC or rubber.
Mono-goggles.
Standard issue work clothes. Safety boots/shoes; chemical resistant.
9. PHYSICAL AND CHEMICAL PROPERTIES
State
Colour Odour
Solubility in water Density
Flash point °C
Liquid.
Grey Slight
Negligible 1.12 – 1.20/cm³@20°C.
>200°C
10. STABILITY AND REACTIVITY
Stability
Conditions to avoid
Materials to avoid Haz. Decompositon
Products
Stable under normal conditions. Thermal decomposition not applicable under normal conditions.
Temperatures above 95°C.
Acids, Strong Oxidising Agents, and Caustic Soda.
Carbon Dioxide, Carbon Monoxide.
11. TOXICOLOGICAL INFORMATION
Ingestion
Eye Contact
Skin Contact Mutagenicity
LD50 Acute oral toxicity in rats : >2000mg/kg.
Eye irritation tested in rabbits : Irritant
Skin irritation tested in rabbits : Irritant Negative Ames test.
12. ECOLOGICAL INFORMATION
Mobility
Bioaccumulative potential
Other adverse
effects
Readily absorbed into soil. Prevent contamination of soil, drains or surface water.
Material sinks in water and has the potential to Bio-accumulate.
Not readily Bio-degradable (Sturm Test), Toxic to aquatic organisms
MATERIAL
SAFETY DATA SHEET
March 2014
rbs Epoxy Mortar LW Page 3 of 6
13. DISPOSABLE CONSIDERATIONS
Recover or recycle if possible. Otherwise dispose to licensed disposal contractor.
14. TRANSPORT INFORMATION
ADR/RID
UN no
Packing Group
Proper Shipping
Name
3082
III
Environmentally Hazardous
Substance, Liquid n.o.s (Bisphenol A Epoxy Resins)
ADR Class
Classification
code
Risk no
9
C11
90
IMDG/IMO
UN no Packing Group
Marine Pollutant
3082 III
Y
Class EmS
Labelling
9 F-A S-F
9
IATA/ICAO
UN no
Packing Group
Labelling
3082
III
9
Class
Packing Instruction
9
914 (cargo/passenger aircraft)
15. REGULATORY INFORMATION
Hazard Symbol
Risk Phrases
Safety Phrases
Xi, Irritant. N, Dangerous to the environment.
R36/38, Irritating to eyes and skin. R43, May cause sensitization by skin contact.
R51, Toxic to aquatic organisms R53, May cause long-term adverse effects in the aquatic environment.
S24, Avoid contact with skin.
S26, In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28, After contact with skin, wash immediately with soap and water.
S37/39, Wear suitable protective clothing, gloves, and eye/face protection.
S61, Avoid release to the environment.
16. OTHER INFORMATION
Other information
MATERIAL
SAFETY DATA SHEET
March 2014
rbs Epoxy Mortar LW Page 4 of 6
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY
Product rbs Epoxy Mortar LW Hardener Component Company Name Resapol Ltd
Unit E8 Aspul Court
Moss Industrial Estate Leigh
LancashiWN7 3PT
Tel: +44 (0) 1942 609001
Fax: +44 (0) 1942 609006
www.resapol.com
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous Ingredients Modified cycloaliphatic polyamine
Name EC No CAS –No Content Classification
Isophorone diamine 220-666-8 2855-13-2 25-50% C R21/22, R34,
R43
Benzyl Alcohol 202-859-9 100-51-6 25-50% Xn; R20/22.
m-xylylenediamine 216-032-5 1477-55-0 10-25% C R20/22
R34, R43
R52/53 3. HAZARDS INDENTIFICATION
Main Hazards Harmful if swallowed, Harmful by inhalation Causes burns, May cause sensitization by skin
contact,
Severe eye irritant
C; R20/21/22, C; R34. 43, R52/53
4. FIRST AID MEASURES
Note: Skin contact
Eye contact
Ingestion
Inhalation
Treat like chemical burns Remove contaminated clothing immediately. Rinse affected skin with copious amounts of
water.
Immediately flush eyes with running water for a least 15 minutes without interruption. Seek medical advice.
DO NOT induce vomiting. Drink water to dilute. Drink citrus fruit juice for neutralisation.
Remove to fresh air in case of indisposition.
5. FIRE-FIGHTING MEASURES
Extinguishing media
Exposure hazards Protection of fire-
fighters
Dry powder, Carbon Dioxide, Water spray.
Carbon Dioxide, Carbon Monoxide, and Nitrogen Oxides may be formed. Wear self contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Environmental
precautions
Clean-up procedures
Avoid skin and eye contact, Provide sufficient ventilation during use.
Prevent from entering sewer system, surface water or soil.
Soak up with absorbent material e.g. dry sand, vermiculite, and dispose of as instructed (see
section 13).
MATERIAL
SAFETY DATA SHEET
March 2014
rbs Epoxy Mortar LW Page 5 of 6
7. HANDLING AND STORAGE
Handling requirements Storage conditions
Use in well ventilated areas. Keep containers tightly closed when not in use. Avoid temperatures below 5°C.
Must only be kept in original packaging.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering measures
Hand protection
Eye protection
Skin protection
Ensure there is sufficient ventilation of the area.
Protective gloves of PVC or rubber.
Full face safety goggles.
Rubber or plastic apron, Suitable arm protection if body contact is possible.
9. PHYSICAL AND CHEMICAL PROPERTIES
State Colour
Odour
Solubility in water Viscosity
Flash point °C
Liquid. Pale Yellow.
Characteristic Amine.
Partly soluble. 350 cps @20°C.
132°C.
10. STABILITY AND REACTIVITY
Stability
Conditions to avoid
Materials to avoid Haz. Decomp. Products
Stable under normal conditions. Thermal decomposition occurs at temperatures above 250°C with liberation of harmful gases.
Frost, contact with reactive materials.
Acids. Carbon Dioxide, Carbon Monoxide, Nitrogen Oxides, Ammonia
11. TOXICOLOGICAL INFORMATION
Ingestion
Eye Contact
Skin Contact
Mutagenicity
LD50 Acute oral toxicity in rats : 3100 mg/kg.
Eye irritation tested in rabbits : Corrosive.
Skin irritation tested in rabbits : Strong irritation.
Negative Ames test.
12. ECOLOGICAL INFORMATION
Mobility
Bioaccumulative potential
Other adverse effects
Readily absorbed into soil. Prevent contamination of soil, drains or surface water.
No data available. No data available.
Not regarded as dangerous for the environment
13. DISPOSAL CONSIDERATIONS
Burn in compliance with local and national regulations in a hazardous incinerator.
MATERIAL
SAFETY DATA SHEET
March 2014
rbs Epoxy Mortar LW Page 6 of 6
14. TRANSPORT INFORMATION
ADR/RID
UN no
Packing Group
Proper Shipping Name
Labelling
2735
III
Amines, liquid, corrosive n.o.s (Isophorone Diamine).
8
ADR Class
Classification code
Hazard ID no
8
53/C
80
IMDG/IMO
UN no Packing Group
Marine Pollutant
2735 III
No
Class EmS
Labelling
8 F-A,S-B
8
IATA/ICAO
UN no
Packing Group Labelling
2735
III 8
Class
Packing Instruction
8
818(P & CA); 820(CAO)
15. REGULATORY INFORMATION
Hazard Symbol
Risk Phrases
Safety Phrases
Corrosive
R20/21/22, Harmful by inhalation, in contact with skin and if swallowed,
R34, Causes burns,
R43, May cause sensitization by skin contact
R52/53, Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment
S26, In case of contact with eyes, rinse immediately with plenty of water and seek medical
advice; S36/37/39, Wear suitable protective clothing, gloves and eye/face protection;
S45, In case of accident or if you feel unwell, seek medical advice immediately (show the label
where possible).
16. OTHER INFORMATION
Other information
Legal disclaimer The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide.
Resapol Ltd shall not be held liable for any damage resulting from handling or from contact with the above product.