rc602-gef datasheet.pdf
TRANSCRIPT
RC602-GEF Remote Manageable GE Media Converter
Raisecom Technology Co., Ltd.Room 217 Rainbow Plaza,Shangdi Information Road,Beijing 100085, China
Tel: +86 10 8288 3305Fax: +86 10 8288 3056Email: [email protected]://www.raisecom.com
@2006~2008 Raisecom Technology, Co., LtdAll trademarks are the property of their
respective owners.Technical information is subject to change
without notice.
Raisecom Technology Co., Ltd.
RC602-GEF Gigabit Ethernet Media Converter
Work mode Master mode and Slave modeTransmission distance
Dual-strand fiber: up to 100kmSingle-strand fiber: up to 60km
Fault-Pass-Through
Fault-Pass-Through is a troubleshooting feature that allows the media converter to monitor the optical link by shutdown the copper port if there is loss of signal on optical link
Remote management
Configure and monitor the remote end unit through local module, this feature greatly decreases the truck roll and logistic costs.
Traffic monitoring Collect the statistics of TX and RX traffic for flexiblly service monitoring
Raisecom RC series media converters are the next generation copper to fiber media converters which bridging the gap between legacy copper infrastructures and fiber growth. Unlike traditional media converters, RC602-GEF performs conversion between fiber optics at both tributary and line sides. Especially helpful for carriers to convert Ethernet service between different fiber optics.
RC602-GEF is a carrier-grade Gigabit Ethernet
fiber optic extension device with industry leading advanced features such as remote management, Fault Pass Through and etc. It is modular design and can be installed in RC002-16 chassis (up to 15 modules with SNMP management card) at central office or in RC001 single slot chassis as standalone unit in remote site, enabling an end to end integrated SNMP management.
Specification
Feature
Datasheet
Typical ApplicationFixed Port 1*tributay fiber port
1*line fiber portIndicators: Power Supply
RMD for remote unitRLK for optical portTLK for optical portACT for optical port
Speed 1000M for fiber portDimension Module design
91(W)*155(D)*25(H)mmPower supply AC: 90~264V, 47~63Hz
DC: 36~75VPower consumption
≤ 4W (at max load)
Working ambience
Temp: 0~45 centigradeRH: 20~90% non-condensing
Storage ambience
Temp: -25~85 centigradeRH: 20~90% non-condensing
Safety Compliance
CE, UL and NEBSOrdering Information Part Number Optical Wavelength RX sensitivity Tx Power Typical distance
Connector (nm) (dBm) (dBm) (km) RC602-GE-M SC 850 <-15 -10 - -3 0-0.55 RC602-GE-S1 SC 1310 <-23 -10 - -3 0-25 RC602-GE-S2 SC 1550 <-20 -3 - 2 0-60 RC602-GE-S3 SC 1550 <-30 -3 - 2 25-100 RC602-GE-SS13 SC 1310 <-20 -5 - 0 0-25 RC602-GE-SS15 SC 1550 <-20 -5 - 0 0-25 RC602-GE-SS24 SC 1490 <-20 -3 - 2 10-60 RC602-GE-SS25 SC 1550 <-20 -3 - 2 10-60
ComplianceStandards & protocols
IEEE802.3x full duplex on 1000BaseTIEEE802.3ab 1000BaseT