rcontact us at 317-770-3680 or by email at … · 2019-04-29 · universal orientation easy flow...

INTEGRATING PLASTIC TECHNOLOGIES SINCE 1965

[email protected]

www.HamiltonPlasticSystems.com

Since 1965

George

Rectangle

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text

CONTACT RGL SALES FOR QUOTES OR ADDITIONAL INFORMATION. CONTACT US AT 317-770-3680 OR BY EMAIL AT [email protected]

Contents

Loaders ............................................................................................................... 2Vectra Series ......................................................................................................................................... 2Integral Vacuum ....................................................................................................................................4Vectra E Series...................................................................................................................................... 5Central System .....................................................................................................................................6SVL-120 Compressed Air ..................................................................................................................7

Powder Loaders ............................................................................................. 8

Loader ControLs ........................................................................................ 10

VaCuum PumPs ................................................................................................ 11Peripheral Pumps ...............................................................................................................................11Central Vacuum Pumps .....................................................................................................................12

Pre fiLters ........................................................................................................ 13

feeders ............................................................................................................... 14Pellet Metering Feeders ...................................................................................................................14Offset Intermixer ...............................................................................................................................15MC-12, MC-18, and MC-30 .............................................................................................................16MCBalance ..........................................................................................................................................17MCHigh Output .................................................................................................................................18MCPowder ..........................................................................................................................................19

grinders ............................................................................................................ 20

dryers ................................................................................................................. 212- and 4-Bed Portable .......................................................................................................................21MicroDry-Convey Package ..............................................................................................................21FM Series Desiccant ..........................................................................................................................22CA Series Micro and Floor Mount ................................................................................................22Hopper Bank Series ..........................................................................................................................22

raiLCar unLoading ..................................................................................... 23

weLded steeL siLos ..................................................................................... 24

surge bins ........................................................................................................ 25

PneumatiC tiLter........................................................................................... 26

temPerature ControLLers ..................................................................... 27Water Temperature Controllers ....................................................................................................27Oil Temperature Controllers ..........................................................................................................28

ChiLLers ............................................................................................................. 29

beLt ConVeyors ............................................................................................. 30

sPrue PiCkers .................................................................................................. 31

hot runner ControLLer ......................................................................... 32

George

Typewritten Text

CONTACT RGL SALES AT 317-770-3680 OR BY EMAIL AT [email protected]

2230 Brunel Rd. • Mississauga, ON L4Z 1T5 Canada • 905-890-0055 • [email protected] • www.HamiltonPlasticSystems.com

VeCtra series

Loaders

Our experience in the design, manufacturing and installation of conveying systems and hopper loaders for plastics processors is your assurance that you will be selecting the most reliable method to save time and material, while reducing costs.

We know what it takes to automatically move pellets, powders, regrinds and granulars from bulk railcars or shipping containers to storage silos and bins, then into processing hoppers.

We are committed to new technologies, we keep our designs simple and our equipment competitively priced; new ideas are not practical if processors can not afford to add them to their processing lines.

A major advantage of a Hamilton loader or loading system is the option to customize controls and control components to meet specific processor requirements. Our engineering and electronics departments are dedicated to providing exactly what our customers want, at a competitive price.

Pressure regulator filter

Stainless steel pellet filter

Universal orientation

Easy flow cone

Steep, 65° cone to optimize discharge of hard flowing materials

Positive sealing 6” discharge valve

Ensures that even the most difficult materials can be discharged evenly without hang up.

No hang up free-flow seal

Positive sealing vacuum valve

Standard on every Vectra system loader. Tee valves are available as an option.

Variety of inlet options

Every Vectra loader can be suited with a variety of inlet sizes and material control valves.

Proximity switch

Provides maintenance free operation.

FIVE DECADES OF EXPERIENCE GOES INTO EACH VECTRA LOADER AND SYSTEM

George

Rectangle

George

Typewritten Text



VeCtra series

Loaders

Lid with T-Valve Lid-Central System Lid-Integral

Single Inlet Ratio Inlet Common Material Inlet Tangential Inlet

Lower Section

SPECIFICATIONS:

C

A

D

B

8” Dia. Loader

Flange Dia. 10”4 Holes 5/16 on 9”BCD

20” Dia. Loader


12/15” Dia. Loader


Loader Diameter

A cu.ft./(litres)

B - Integral inch/(cm)

B - Central inch/(cm)

C inch/(cm)

D inch/(cm)

Max Pump HP

Max Line Size inch/(cm)

8" 0.25 (7) 16 (40.6) 17.75 (45.1) 5.0 (12.7) 10 (25.4) 7.5 1.75 (4.4)

0.25 (7) 17 (43.2) 5.25 (13.3) 5.25 (13.3) 14 (35.6) 15 3 (7.6)

0.5 (14) 23 (58.4) 22 (55.9) 5.25 (13.3) 14 (35.6) 15 3 (7.6)

1.0 (28) 29 (73.7) 5.25 (13.3) 14 (35.6) 15 3 (7.6) 12"

1.5 (42) 37 (94) 5.25 (13.3) 14 (35.6) 15 3 (7.6)

1.0 (28) 28 (71.1) 27 (68.6) 5.25 (13.3) 14 (35.6) 25 4 (10.2) 1.5 (42) 32 (81.3) 5.25 (13.3) 14 (35.6) 25 4 (10.2) 15"

2.0 (56) 37 (94) 5.25 (13.3) 14 (35.6) 25 4 (10.2) 3.0 (85) 42 (106.7) 5.25 (13.3) 16 (40.6) 25 4 (10.2) 5.0 (141) 51 (129.5) 5.25 (13.3) 16 (40.6) 25 4 (10.2) 20"

7.0 (198) 60 (152.4) 5.25 (13.3) 16 (40.6) 25 4 (10.2)

George

Rectangle

George

Typewritten Text



integraL VaCuum

Loaders

The Vectra series of self-powered, integral motor loaders, are ideal for the conveying of pellets and regrinds over shorter distances. Conveying ability ranges from a few hundred pounds to over 2,000 pounds per hour. Ratio models include two inlet ports with controls for ratio loading.

Vectra integral motor loaders include solid state controls with an on/off switch and external load time adjustment. A no material alarm is available on all integral models, which will alarm if no material is being conveyed. All models include automatic filter cleaning.

These loaders are shipped ready to use, complete with flexible conveying hose, clamps and vertical feed tube. Horizontal feed tubes for bin unloading are available as an option.

Brushless motors are also available as an option. Processors who wish to eliminate the routine maintenance costs associated with brush monitoring and replacement on single-phase vacuum motors can now opt for maintenance-free brushless motors.

�All carbon steel construction, durable and resistant to �Filter, regulator and gauge for compressed supply airabrasive materials �Conic discharge allowing for a uniform material flow

�Positive air operator discharge valve with external seal �Dacron material filterto prevent material hang up �High volume compressed air blow-back

�Full flexibility in adjusting the orientation of the �Designed for easy cleaning, no internal hang up pointsmaterial inlet �Easy field retrofits and upgrades

�Steep, 65° cone to optimize discharge of hard flowing �Electronic demand sensormaterials �120 volt operation

�Integrated support stand �Same day shipment on standard models

STANDARD FEATURES:

�Brushless integral motor �Closed loop conveying air�Remote mounted controls (up to 10’) �High temperature package�Silencer for the integral motor �Abrasive material package�External, dual material ratio value �Remotely mounted demand proximity sensor�“Receiver full” proximity sensor �240 volt operation�Flapper discharge

OPTIONAL FEATURES:

George

Rectangle

George

Typewritten Text



VeCtra e series

Loaders

Designed for beside the press loading, the Vectra E Series of loaders are a perfect

blend of performance and price. Models are available in either single or dual feed

(ratio) to suit your application.

�Heavy duty vacuum motor �Dacron filter�Welded steel construction �Sufficient steel tube, couplings and �Counterbalanced hinged flexible tubing for installation up to discharge valve 4' horizontal x 12' vertical

�Discharge valve seal �Pick up wand�Pulsed air filter cleaning �10' Power cord�C MOS integrated circuit �Ratio mixing features include:controls system �Regrind percentage control

�Adjustable loading time �Mixing frequency control�Power on/off illuminated breaker �Dual mixing valvesswitch �Air line filter

�Demand level switch

DUAL TUBE LOADER (RATIO) FEATURES:

MODEL # VL1202-175IEF120

MODEL # VL1202-175IERF120

SPECIFICATIONS:

Loader Model VL1202-175IEF120 VL1202-175IERF120 Vacuum motor 5/8 hp brush type 5/8 hp brush type Injection molding machine 500 tons 500 tons Extruder size 2 inch 2 inch Recommended throughput 200 lbs/hr 200 lbs/hr Maximum conveying distance 20' 20' Loader diameter 12" 12" Line size 1.75 1.75 Available voltages 120 /220 VAC 50/50 Hz 120 /220 VAC 50/50 Hz Compressed air requirements 80 psi 2 cuft /min 80 psi 2 cuft /min Filter area 113 In² 113 In²

�Heavy duty vacuum motor �Demand level switch�Welded steel construction �Dacron filter�Counterbalanced hinged �Power on/off illuminated breaker discharge valve switch

�Discharge valve seal �Sufficient steel tube, couplings and �Pulsed air filter cleaning flexible tubing for installation up to �C MOS integrated circuit 4' horizontal x 12' vertical controls system �Pick up wand

�Adjustable loading time �10' Power cord

SINGLE TUBE LOADER FEATURES:

George

Rectangle

George

Typewritten Text



CentraL system

Loaders

Feature for feature, Vectra loaders are engineered to give you more than any other vacuum material receiver in the market. The heavy-duty carbon steel body makes Vectra loaders resistant to the toughest industrial applications. Vectra loaders are used in various configurations, as a single unit with a dedicated vacuum pump, or in a system consisting of multiple units with a centralized vacuum pump. In the centralized version, a single vacuum line connects multiple receivers to a common pump. This pump powers all receivers, one at a time in a demand sequence operated by a central vacuum controller.

Vectra loaders are modular. They can be easily expanded, retrofitted, or enhanced to meet needs of the dynamic industrial environment.

Vectra loaders are designed to offer features and quality that are superior to any other vacuum receiver on the market.

�External, dual material ratio valve �“T” vacuum valve�External common material valve �High temperature package�“Receiver full” proximity sensor �Abrasive material package�Flapper discharge �Remotely mounted demand proximity sensor�Wiring junction box �Various voltage options: 24Vac, 24Vdc and 240Vac�Closed loop �Stainless steel construction

OPTIONAL FEATURES:

�All carbon steel construction, durable and resistant to �Filter, regulator and gauge for compressed air supplyabrasive materials �Conic discharge for a uniform material flow

�Stainless steel pellet screen �Designed for easy cleaning to prevent material �Positive closing discharge valve accumulation.�Full flexibility in adjusting the orientation of the �Easy field retrofits and upgradesvacuum valve and material inlet �Patented material level switch (eliminates electronic

�Integrated loader support. sensors)�Steep, 65° cone to increase flow, optimizing discharge �120 volt operationof hard flowing materials �Same day shipment on standard models

STANDARD FEATURES:

George

Rectangle

George

Typewritten Text



sVL-120 ComPressed air

Loaders

�Euro style, compact in size and lightweight. �Polished surface.�Stainless steel material hopper and base ensure no �Compressed air filter and regulator to eliminate contamination of material. moisture and maintain steady air pressure.

�Filtered exhaust. �Quick installation and easy operation with quick �Capacitive sensor mounted onto glass-tube for release base clamp on base for ease of cleaning.accurate level sensing of material. �Adjustable orientation of hopper and base.

�Silent operation.

FEATURES:

SPECIFICATIONS:

Model Conveying capacity (Lbs/hr)

Material hopper (Cuft)

Max. conveying distance (ft)

Conveying hose (Dia)

Length of flex hose (Ft)

Dimensions (inch) (H x W x D)

Weight (lbs)

SVL-120 175 0.1 20 1.25 10 21.23 x 8 x 9.5 15

The compact SVL Venturi Loader makes it easy to provide troublefree loading wherever you need it. Using compressed air at around 70-90 PSI to create a vacuum, the SVL’s highly efficient Venturi draws material from drums, bins or gaylords. From there, the material is conveyed by compressed air Venturi to the stainless steel receiving hopper that can be mounted to virtually any vessel or machine throat.

Using a unique, low maintenance filter assembly, material is separated from the conveying air stream and deposited directly into a bin or machine throat. The wide-open Tube Loader body keeps material flowing without bridging and without a discharge valve common to other types of loaders. A demand sensor tells the SVL when to load and when it is full. Material flow is easily adjusted for throughput and conveying distance with the included air pressure regulator.SVL-120

BaseO-ringFlange clampHopperMaterial baffleAir filterFilter knobSensorConveying tubeAir tubingCompressed-air filter & regulator

1. 2. 3. 4. 5. 6. 7. 8. 9.

10. 11.

George

Rectangle

George

Typewritten Text



Powder Loaders

Hamilton Vectra series Powder Loaders are specifically designed to move a wide variety of powders, resins and dusty regrinds with different particle sizes and structure. The Triax Carbonized bag type filters provide a greater air to cloth ratio inside the vacuum chamber of the loader. The pulsed air cleaning cycle purges the filter area after each load cycle with bursts of compressed air, assisted by an accumulator ensuring all powder or granular fines are removed.

Equipped with a smooth-wall interior, and a compact filter chamber, the Vectra powder loader is easy to maintain. Quick release latches and utility connections allows easy no-tools disassembly. 360° independent orientation of the base, center section and lid assembly allows complete installation flexibility. Even the filter bags can be released individually or as a subassembly. Hamilton’s unique, removable filter plate module, means filter changes are faster and cleaner than competitive designs. An oversized compressed air accumulator and special blowback provide, blasts of air through the filter bags at the end of each load cycle to virtually eliminate filter clogging. The quick disconnect lift off lid, simplifies installation and service.

Brushless motors are also available as an option, processors who wish to eliminate the routine maintenance costs associated with brush monitoring and replacement on single-phase vacuum motors can now opt for maintenance-free brushless motors

�60° Hi Flow cone for rapid material discharge�All carbon steel construction to provide outstanding durability

�Conic discharge to ensure fast and uniform material discharge

�High volume blowback for cloth filters�Rotary switch as means of detecting material level

�Modular design�1/4 to 3 cuft capacity (larger models available upon request)

�High Level proximity sensor to avoid filling�Upgradeable from integral to central vacuum sequencing valve

STANDARD FEATURES:

�Silencer for integral models �Brushless motor for �Flapper discharge integral models�Demand proximity sensor �T-valve�External ratio valve �Common material valve�High wear package

STANDARD OPTIONS:

STAINLESS STEEL WEAR PLATEReplaceable sacrifice plate for use with highly abrasive materials.

INTEGRAL MOTOR INSULATED SOUND ENCLOSUREReduces the dba level emitted from the motor.*not available on 8” powder loader

AVAILABLE OPTIONS:

RATION VALVEFor loading and mixing regrind or a second material. Includes upgraded control.

HOPPER VENT FILTERNeeded when the receiving hopper and loader connection are sealed or where a loose fitting hopper lid would allow dust to escape during filter cleaning. This allows the proper operation of the filter cleaning sequence and increases the life span of the sock filters.

George

Rectangle

George

Typewritten Text



Powder Loaders

SPECIFICATIONS:

Model VP0802-175I120

VP1510-1751X120

VP1510-250120

VP2030-300120

VP2230-400120

VR 1510-1751X120

Loader Diameter

8.0" 15" 15" 20" 20" 15"

Loader Capacity

0.25 1.0 through 2.0 cu.ft.

1.0 through 2.0 cu.ft.

3.0 cu.ft. 3.0 cu.ft. 1.0 cu.ft.

Line Sizes available

1.75" 1.75" through 3"

1.75" through 3"

2.5" through 3"

1.75" through 3"

1.75"

Voltage 120, 240 / 1 / 60 VAC

120, 240 / 1 / 60 VAC

All voltages available



120, 240 / 1 / 60 VAC

Conveying Capacity Max.

400/lbs/hr 1000-2000/lbs/hr

1000/lbs/hr

Conveying Distance

10' Vertical x 10' Horizontal



Filter Area 14 sq/ft

VR 12 Series VR 15 Series VP 15 Series

George

Rectangle

George

Typewritten Text



Loader ControLs

Hamilton manufactures a wide variety of loader control systems, from custom systems designed to your specifications to our line of standard controls. The Meridian is one of Hamilton’s most versatile control systems available. With a long list of standard features, this control system can meet the most demanding applications. The Meridian is no stranger to growth either: it is completely expandable up to 24 stations in blocks of eight. The expansions modules can be placed as far as a 1000 feet away from the master control.

Easy to use control requires no training. The LCD display provides on screen prompts for programming load times and other setting at each vacuum receiver.

Easy to set station priority so that machines with higher consummation will never run out of material. Priority fill is beneficial when a particular station or stations are on demand more frequently than others. Simply by identifying which station(s) requires priority the controller on demand will satisfy these station(s) prior to non priority stations.

Should a failure to convey material occur each station will attempt conveyance three times after which an audible and visual alarm will function with station identification. The audible alarm can be enabled or disabled. The control comes in a wide variety of control voltages (24 vac, 110 vac., and 220 vac.)

SPECIFICATIONS:

Maximum units per system

Maximum number of receivers

Control voltage Main voltage

Full load amps. @110 volt

Master 1 8 220-110-24 vac 110 or 220 15 Expansion 2 24 220-110-24 vac 110 or 220 15

FEATURES:

�Operator adjustable microprocessor control �Password protection�100% solid state �Station on/off switches through controller�Keypad adjustable with L.E.D. readout graphic �NEMA 12 control enclosure

front panel control �Priority control on all stations�All timing functions programmable �No material alarm (audio and visual)

George

Rectangle

George

Typewritten Text



PeriPheraL PumPs

VaCuum PumPs

�Pump motor requires no maintenance: permanently lubricated to reduce down time

�Quiet operation: requires no sound proofing�Reliable components: includes a magnetic starter and overload protection�Main voltage disconnect�Continuous run valve: eliminates frequent starting and stopping of the pump motor

�Integrated pump protection prefilter�Larger models available upon request

FEATURES:

For small to medium material conveying jobs, nothing beats the simplicity of a peripheral vacuum pump from Hamilton. Peripheral pumps utilize a one piece fan/turbine unit to produce a reliable vacuum source for one to several loaders.

If short, frequent loading cycles are anticipated, the pumps are equipped with a continuous run valve, that allows the pump to continuously run between loading cycles, eliminating start/stop cycles.

SAL-5HP-UG

SPECIFICATIONS:

Model HP CFM Inch HG Line size Dimensions Weight

SAL-1HP 1 26 3.5 1.5 25.75 x 14.5 x 16 150

SAL-2HP 2 60 5 1.5 26 x 14.5 x 16 150

SAL-3.5HP 3.5 100 5 2 52 x 16.5 x 21.5 290

SAL-5HP 5 125 5 2 52 x 16.5 x 21.5 385

SAL-7.5HP 7.5 250 5 2 67 x 23 x 23.5 400

SAL-10HP 10 300 5 2 67 x 23 x 23.5 410

SAL-15HP 15 450 5 2.5 82.5 x 27 x 31.5 500

George

Rectangle

George

Typewritten Text



CentraL VaCuum PumPs

VaCuum PumPs

Positive displacement vacuum pumps are designed for long distance, high-volume material conveying. Each model employs a powerful, rotating lobe-type blower, protected by a vacuum relief valve (factory-set) and belt driven by a three-phase motor with magnetic starter and overload protection. An integral pump protection filter is included. All components are mounted on a rugged frame that houses an integral exhaust muffler. An optional sound enclosure may be added to reduce noise.

Five models are provided for a complete range of vacuum power for your resin conveying application. Larger models are available; please consult the factory on your requirements.

When coupled with our extensive line of vacuum receivers, dust collectors and control systems, Hamilton's positive displacement pumps will provide you with the longest, low-maintenance vacuum conveying performance in the industry.

STANDARD FEATURES:

�In-line pump protection filter�Vacuum relief valve�T.E.F.C. high efficiency motor�Rotary lobe displacement pump�Magnetic starter�Heavy duty industrial silencer

OPTIONAL FEATURES:

�Continuous run valve�Sound enclosure�Stacking frame�Full voltage starter

HEAVY DUTY SERIES (12HG) SPECIFICATIONS:

Model 75.8003.00 75.8005.00 75.8007.00 75.8010.00 75.8015.00

HP 3 5 7.5 10 15

Line Size 1.5 1.75 2.25 2.5 3

CFM @ 12HG 55 100 170 235 310

STANDARD SERIES (10HG) SPECIFICATIONS:

Model 75.8003.NO 75.8005.NO 75.8007.NO 75.8010.NO 75.8015.NO

HP 3 5 7.5 10 15

Line Size 1.5 1.75 2.25 2.5 3

CFM @ 10HG 85 105 152 200 309

George

Rectangle

George

Typewritten Text



Pre fiLters

Hamilton Vectra Pre Filters keep your plant free of airborne dust and fines and prevent dust from fouling the vacuum pump. A central vacuum Pre Filter allows dust filtration to take place at the floor level. An air-tight collection container makes the removal of fines quick and easy. Automatic filter cleaning is standard, lengthening the time between service requirements. VFLC and VFHC models use an integrated "vacuum valve" to remove dust from the filter, while the VFLS and the VFHS has a sophisticated sequential blowback system. The integrated dust canister releases easily for periodic emptying. Quick release clamps opens the lid for quick access to the filter cartridge. Each model comes equipped with a free standing floor frame.

Models are sized to provide the right amount of filter area for the pump CFM and line size of the conveying system. The pulsed air pre filter provides four filters with an automatic blowback system for maximum filter life. Larger units are available, please consult the factory on your requirements.

Dust-laden vacuum air enters the collector, where the spinning air stream separates most of the dust. The oversized filter traps the remaining dust and collects the excess in the integrated canister. The valve closes at the end of the conveying sequence, rapidly changing the air pressure. This shocks the filter clean and allows fines to drop into the collection canister.

An air deflector at the inlet separates most of the dust from air upon entry. Four filter cartridges collect the rest. A purging cycle uses accumulated compressed air to blast each cartridge clean from the inside out. This sequence drops fines into the collection canister. The pulse air provides maximum filter life between manual cleaning.

�360 orientation of connections �Modular components�Compact design (easy to clean) �Steep 60 cone�Easy access no tools needed �Optional accumulator blowback on �Tangential inlet (efficient dust “S” versionseparation) �Optional recycling system

�Automatic filter cleaning �Carbon steel construction

FEATURES:

MODEL VFHS250120

MODEL VFLC250120

SPECIFICATIONS:

Model Maximum C.F.M. Pump range Voltage Air requirements Cartridge filter area Sock filter area

VFX 400 15-25 HP 24/120/230 80-90 psi 124 sqft N/A

VFH 300 10-15 HP 24/120/230 80-90 psi 78.4 sqft 8 sqft

VFL 200 3-10 HP 24/120/230 80-90 psi 41.5 sqft 4 sqft

MODEL VFX MODEL VFH MODEL VFL

George

Rectangle

George

Typewritten Text



PeLLet metering feeders

feeders

Spectra system meters colorants/additives directly into injection, blowmolding machines and extruders. Hamilton's new Spectra is a self-contained, highly versatile metering system for precise introduction of free-flowing plastics colorants or additives to base resins as they flow into your processing machine throat. Spectra eliminates off-machine tumble mixing, spillage, waste and pre-mixed inventories and provides an economical, reliable method to custom blend materials just before they are processed.

A variable-speed, D.C. motor powers a selected metering auger that volumetrically feeds colorants or additives upon a signal from either the injection or blow molding machine cycle, or in conjunction with extruder speed.

�Brushless AC drive

�Digital display (Dc drive only, standard on AC option)

�Thumbwheel setpoint (Dc drive only, standard on AC option)

�Tach follower control (Dc drive only, standard on AC option)

�Injection control (Dc drive only, standard on AC option)

�Cutout for loader mounting

AVAILABLE OPTIONS:

Grams/hr continuous extrusion (Lbs/hr) RPM 10 20 30 40 50 60

1/2" 480

(1.05) 960 (2.1)

1140 (3.2)

1920 (4.2)

2400 (5.3)

2880 (6.3)

3/4" 2400 (5.3)

4800 (10.6)

7200 (16.8)

9600 (21.1)

12000 (26.4)

14400 (31.7)

1" 5100 (11)

10200 (22)

15300 (34.7)

20400 (45)

25500 (56)

30600 (67)

1 1/2" 16200 (36)

32400 (71)

48600 (107)

64800 (143)

81000 (178)

97200 (214)

2" 30900 (68)

61800 (136)

92700 (204)

123600 (272)

154500 (340)

185400 (408)

Time: measured from auger stop RPM: motor RPM can be infinitely adjusted from 0-60 Select: auger closest to 30 RPM

OPTIONAL ACV BRUSHLESS DRIVE

The ACV brushless drive option gives you the flexibility of RPM and torque combinations, packaged with a premium variable frequency inverter drive for precise control and a customized metering throughput.

Integration of features such as brushless, RPM, torque and throughput make this option package a preferred choice to the most demanding processor.

�Micro Ac inverter

�Nema 4 enclosure

�3 Digit L.C.D. display

�Injection control (dry contact needed on injection machine)

�Tach follower function (0-2 mA analog signal) (4-20 mA analog signal) (0– 10 VDC analog signal)

CONTROL FEATURES:SPECIFICATIONS:

Model HP RPM (max)

Torque (LB-in.)

Max throughput

Max auger diameter

6ACV 1/6 50 270 55 Lbs/HR 1"

7ACV 3/8 130 167 1135 Lbs/HR 2"

8ACV 3/8 250 115 1700 Lbs/HR 2"

George

Rectangle

George

Typewritten Text



offset intermixer

feeders

The Hamilton offset intermixer is an excellent, simple and economical solution providing thorough material mix to improve the mixing screw capabilities in both injection molding machines and extruders. The offset intermixer forces material to traverse it’s length and undergo agitation before entering the feed throat.

Compact design allows application with almost any equipment arrangement.

The unit’s removable Lexan front cover provides visual inspection of the mixing and easy access for clean out.

The intermixer can be combined with a Hamilton spectra feeder, material hopper and vacuum loader to provide economical and reliable mixing, feeding and loading system.

FEATURES:

�Cast aluminum body�Stainless steel mixing paddle�Starter with over load protection�No tools cleanout�Heavy duty 1/6 HP gear motor�Sealed guide bearing�Lexan front face cover

SPECIFICATIONS:

Mixer speed R.P.M. 42

Volumetric capacity 0.15

Weight 60 lbs

Voltage 110/1/60 or 220/1/60

Full load amps 110 volt 3.6

220 volt 1.0

Mounting flange 8" x 8"

Material inlet 3 inch

Hopper loader

Material hopperFeeder

Intermixer

George

Rectangle

George

Typewritten Text



mC-12, mC-18, and mC-30

feeders

All units are equipped with unique dosing cylinder and extremely accurate stepper motor. The dosing cylinder releases the colour in a steady flow. The stepper motor ensures maximum control with no stoppages and no pulsating. There is no other method in the world as accurate as this.

MC-12 ECONOMY�Manual adjustment of metering speed and time�Manual calibration �Relay mode for extrusion �4-piece, 7 segments LED display �Keypad operated �Keypad lock function �Capacity 0.07-72 kg/h measured with normal granular masterbatch 0.8 kg/dm³

MC-18 SYNCHRONIC�Like the MC-12, plus:

�Auto Synchronization to extruder speed�Integrated hopper loader control�Alarm output�Capacity 0.07-180 kg/h measured with normal granular masterbatch 0.8 kg/dm³

MC-30 AUTO-CALIBRATE�Integrated hopper loader control�Warning and alarm output�Automatic material calibration function�Recipes storage function�Communication TCP/IP�Menu guided control and graphic LCD display with backlight�Control for extrusion:

�% Setpoint adjustment�Auto Synchronization to extruder speed

�Control for injection molding:�% setpoint adjustment�Auto metering time synchronization

�Capacity 0.07-180 kg/h, measured with normal granular masterbatch 0.8 kg/dm³

MC-12

MC-18

MC-30

SPECIFICATIONS:

Power supply 80 VAC to 260 VAC, 50 and 60Hz. by integrated automatic voltage selector.

Power consumption 80 Watt max.

Input signals Potential free- or 24Vdc start input

Capacity ranges 0.07-180 kg/h*

*measured with normal granular masterbatch 0.8kg/dm3

George

Rectangle

George

Typewritten Text



mCbaLanCe

feeders

SPECIFICATIONS:



Language English, German, Spanish, French, Polish, Italian*

Operation Menu guided control

Input signals Potential free-, 24Vdc-, or extruder tacho (0-30Vdc) start input

Output signals Alarm, warning, solenoid valve for automatic hopper loader

Output ranges 0.07-180 kg/h**

Application Injection molding machines (also for PET production), Extruders and Blow molding machines

Communication TCP/IP, Modbus and CANbus

Data storage Internal memory (static changes), MC-LAN data logging software (dynamic changes)

*other languages available on request**measured with normal granular masterbatch 0.8kg/dm3

Gravimetric in-line dosing system MCBalance offers plastic producing companies maximum control, maximum efficiency and maximum savings.

Through continuous loss-in-weight measuring, one is ensured of the best results for the best price. The MCBalance dosing system continuously calibrates the dosages and adjusts automatically. The MCLan enables the producer to monitor all MCBalance dosing systems from one computer. Plastic processors worldwide choose this gravimetric dosing unit for stability in coloring with masterbatch, powder or regrind.

The dosing unit delivers exactly the results you want thanks to the combination of gravimetric technology, the dosing cylinder and the stepper motor. The MCBalance gives you control over your color use and, as such, your costs.

BENEFITS:

�

months is not unusual) �Saving on additives up to 50% �Stability guaranteed �Less color variation �No stoppages or pulsing with the stepper motor �Steady flow with the dosing cylinder dosing directly

in the main material �Easy to operate and easy to clean �Color changes can be realized within 30 seconds �Lots of possibilities to adjust or upgrade the dosing

unit

Return on investment less than a year (six to nine

FEATURES:

�

�Automatic material calibration �Integrated hopper loader control �Warning and alarm output �Recipes storage function �Communication TCP/IP, Modbus and Profibus �Menu guided control and graphic, LCD display with

backlight, or�8 inch full color touch screen for simple operation of

single and multi-component systems �Control for extrusion: % setpoint adjustment, auto

synchronization to extruder speed �Control for injection molding: % setpoint adjustment, auto

metering time synchronization �Capacity 0.07-180 kg/h, measured with normal granular

masterbatch 0.8 kg/dm3

Continuous loss-in-weight measuring

George

Rectangle

George

Typewritten Text



mChigh outPut

feeders

�Continuous loss-in-weight measuring.�Operation similar to the standard MC-Balance gravimetric dosing unit.

�Easy cleaning: The motor/screw assembly and the weighing hopper can be removed without tools.

�Drain and material calibration connection.�Integrated slide valve to control the material loading.�

�

�

�Capacity from 50 kg/h. up to 1000 kg/h depending on the material.

�Can be used for granulates, flakes and free flowing powders.

�Can be used for dried materials up to maximum 180°C (like dried PET flakes).

�Can be easily integrated with other Movacolor gravimetric units to a multi component gravimetric dosing system.

Integrated hopper loader control.Warning and alarm output.Recipes storage function.

FEATURES:


Capacity From 50 kg/h. up to 1000 kg/h.


Operating temperature -20ºC to +180ºC

Operating temperature controller -20ºC to +70ºC

Language English, German*

Operation Menu guided control

Input signals Potential free- or 24Vdc start input

Output signals Alarm

Data storage Internal memory (static changes), MC-LAN data logging software (dynamic changes)

SPECIFICATIONS:

*other languages available on request

When it comes to high output dosing, dosing unit MCHigh Output offers the best solution in terms of control, efficiency and savings. Gravimetric in-line dosing system MCHigh Output has two load cells for continuously weighing through loss-in-weight measurement. The dosage system doses additives like masterbatch, regrind and powders from 50 kg/h up to 1000 kg/h. The MCHigh Output can also be used for flakes and hot materials up to 180 °C. The full gravimetric dosage system monitors the output continuously and adjusts automatically.

�

�

�

�

�

�

Accurate dosing of high output masterbatch, powder or regrind up to 1000 kg/h Maximum control through controls, dosing cylinder and stepper motor Maximum stability in the coloring process Maximum savings on colorants For operators easy to operate and also easy to clean The allowance of quick change of colorants

BENEFITS:

George

Rectangle

George

Typewritten Text



mCPowder

feeders

�Double spiral/auger design for reliable dosing of non-free-flowing powders

�Agitator avoiding material clogging or rat holing �High grade polished hopper �Quick release coupling for easy cleaning �Capacity 0.1 - 40 kg/hr �Special support frame for hopper loaders available�Extremely accurate and robust: the unit is made to last in the most hostile environments

�User-friendly 8” full color touch screen display with integrated hopper loader control

�Modular design: MCPowder can be integrated in Movacolor’s unique multi-component blending systems

FEATURES:

SPECIFICATIONS:

Power supply 95 VAC to 250 VAC, 50 and 60Hz automatic power supply


Language English, German, Spanish, French, Polish, Italian, Dutch, Chinese, Japanese*

Operation 8" full color touch screen with 500 recipes storage

Input signals Potential free-, 24Vdc-, or extruder tacho (0-30Vdc) start input. Extra 2 analog input 0-10Vdc or 4-20mA**

Output signals Alarm, warning, solenoid valve or relay for hopper loader control, 2 x 0-10Vdc or 4-20mA**

Output ranges 0.1-40 kg/hr***, non-free-flowing powders

Application Injection molding, extrusion and blow molding

Communication TCP/IP, Modbus, Profibus**, Profinet**

Data storage Internal memory (alarm/event), MCLan2 data logging software (process log and material management)

*other languages available on request

***measured with powder with a bulk density of 0.6kg/dm³**optional

Dosing powders is one of the most difficult challenges in the field of dosing. Especially when we talk about non-free-flowing powders at extreme low rates. Expensive powder additives with high impact to your process require the best in the field of accuracy and reliability.

Movacolor has, based on its proven gravimetric technology, developed a compact powder dosing unit to do just that. The unit can dose as low as 100 grams per hour, but at the same time up to 40 kg/hr. Double spiral or auger and hopper agitation ensures a trouble free dosing of the most difficult powders.

The unit operates as a single unit, but can also be integrated in our unique modular continuous blending system. A special hopper loader frame allows a wide variety of hopper loaders or screw conveyors to be installed. Operation of the loaders is integrated in our 8" full color touch screen control.

George

Rectangle

George

Typewritten Text



grinders

SG-2348

Hamilton offers a large selection of granulators designed to grind all forms of materials.

�Full soundproof enclosure�Tool free access to screen cradle and rotor�Staggered rotating blades�Closed rotor design�Reversible screens with six screen size choices

SG-23 SERIES:

�Full soundproof enclosure�Tool free access to screen cradle and rotor�Staggered or paddle blades�Closed or open rotor design�Reversible screens with six screen size choices

SG-30 SERIES:

�Five layer sound proof hopper�Low-speed staggered blades perfect for beside-the-

press operation�Robot or hand feed�Closed rotor design

SG-16 SERIES:

�Five layer sound proof hopper�Low-speed paddle or staggered blades perfect for

beside-the-press operation�Robot or hand feed�Open rotor design

SG-20 SERIES:

�Film grinders�Rotary knives and bed knives work together to

produce quality regrind�Stainless steel dancer assembly�Open rotor design

AR SERIES:

�Low speed and low noise level�Teeth cutters and cutting blades perfect for beside-

the-press operation�Screenless design

SG-14 AND SG-24 SERIES:

�Silent operation�Low speed toothed rotor to virtually eliminate

dust and fines�Storage or vacuum take off bin�Robot or hand feed�Compact design

AH SERIES:

�Central system granulators�Full soundproof enclosure�Up to 200 HP�Multiple rotor designs�Conveyor or hand feed

A SERIES:

SG-2436AR SeriesA Series

George

Rectangle

George

Typewritten Text



2- and 4-bed PortabLe

dryers

�Space-saving, compact design�Stainless steel, insulated hoppers�Closed loop loading (optional) conveys dried material with dry air�Available power: 208, 230, 400, 480, 600 VAC; 50/60 Hz.�Temperature based regeneration; adapts to ambient and material conditions

�Single blower design will save up to 50% in energy costs�No moving parts

FEATURES:

The APD series 2-Bed and the HPD series 4-Bed dryer, hopper and optional loading systems provide easy, reliable and safe material handling by eliminating press/extruder mounted drying hoppers for fast material changes. 2-Bed dryers offer industry standard and reliable operation, with dew points as low as -49°F, while 4-Bed dryers offer a patented, high performance operation, with dew points as low as -130°F.

2-Bed Dryer

4-Bed Dryer

MICRODRY-CONVEY PACKAGE

�Compact size: the dryer, hopper, and conveyance system fits on the back of most vertical injection molders.

�ADC Control: -49°F dewpoint monitor; high temp alarm & shutdown; 7 day timer; alarm history; thermocouple alarms.

�Compressed air conveyance: Our DAC compressed air loader conveys dried resin to the throat mounted JIT receiver.

FEATURES:

The MicroDry-Convey package is ideal for vertical injection molders – the dryer and hopper will fit on the back of most vertical injection molders, conserving valuable floor space. There are two dryer options available: compressed air (CAMD) and desiccant (Arid-X 10).

Arid-X 10 Dryer:�The compact dual desiccant bed Arid-X 10 dryer is ideal for low throughput / small press and extruder applications. An all electric design, no compressed air is required, just plug it in to a single phase 110 or 220 volt outlet.

CAMD Dryer:�With no moving parts the CA series is ideal for low throughput / small press and extruder applications with a simple, easy to use design

�Can operate from high (350°F - 175°C) to low (80°F - 25°C) drying temperatures without the need for water cooled after-coolers.

�The Dri-Pak membrane assures low dewpoint air to dry the toughest materials

MDC-150 with ADC Control

George

Rectangle

George

Typewritten Text



fm series desiCCant

dryers

CA SERIES MICRO & FLOOR MOUNT

The compressed air micro (CAMD) and compressed air floor mount (CAFM) dryers are compact, easy to use dryers that uses your plant air and internal Dri-Pak membrane to assure -49°F dewpoint air at the hopper.

�Low maintenance: with no moving parts the CA series is ideal for low throughput/small press and extruder applications.

�Can operate from high (350 F) to low (80

�

�

�

° °F) drying temperatures without the need for water cooled after-coolers.The Dri-Pak membrane assures low dewpoint air to dry the toughest materials such as PLA’s, Isoplast, Ultems.UDC (Ultra Dryer Control) with high temp alarm & shutdown.ADC Control optional.

FEATURES:

�Space-saving compact design available for process rates up to 750 lbs/hr.�Models are available in industry-standard 2-bed (ARID-X FM Series) and

high-performance 4-bed (HP4-X FM Series)�No moving or rotating internal parts�Single blower design for process and regeneration air�On-demand regeneration; adjusts to ambient conditions, materials and

process rates�-49°F to -130°F dew points; as dry air, not ambient air is used for

regeneration or cool down of desiccant towers�Can be used with Hopper Bank Series and multi-hopper systems

FEATURES:

The FM series of floor-mounted desiccant dryers are the most energy efficient dryers in the market (when compared to compressed air, rotary, wheel, vacuum and other dual bed dryers).

CAMD-1 w/ ADC Control, 2 & 3/4 litre hopper

Model 25 & 35

HOPPER BANK SERIES

One dryer connects to multiple hoppers for a centralized drying system. Dry different materials at each hopper as each has its own booster heater for temperature control. Processors making one or two materials changes daily can justify the cost of a hopper bank in months.

Model with four 30-lb hoppers and HP4-X 100FM dryer

�Air manifold with manual shutoff valves (inlet/outlet) isolate hoppers not in use or while being cleaned.

�Hopper quantities range from 3 or more and hopper capacities from 5-lbs. and higher.

�ADC (Advanced Dryer Control) is standard. This includes alphanumeric display. Also, each hopper has its own run timer so you know how long its been drying.

�Temperature setback (optional) reduces drying temperature at each hopper when material is dry to prevent overdrying.

FEATURES:

George

Rectangle

George

Typewritten Text



raiLCar unLoading

For high-rate railcar unloading, exceptionally long conveying distances and other conveying requirements which exceed the design limits of larger vacuum systems, Hamilton custom engineers vacuum/pressure and pressure type conveying systems.

A bulk unloading and storage system can increase your productivity and plant efficiency while decreasing your labor, material, and energy cost. Hamilton has the capability to tailor a railcar unloading and storage system to meet your specific application.

Free flowing pellets or powders can be conveyed from single or multiple source points to any number of end-use locations, using central vacuum pressure pumps up to 100 hp, or larger.

Manual or automatic conveying line switching stations can be included. Either single or two pump, modular systems and large filter receivers may be supplied.

These large filter receivers are filled by the vacuum side of the pump when a rotary air lock at the bottom of the receiver feeds a controlled amount of material into the moving air system delivered by the pressure side of the blower.

STANDARD FEATURES:�

�3", 4", 5", 6"and 8" line sizes available.�Separate or combined vacuum and pressure

blowers.�Self-cleaning filter receiver.�Rotary Airlock valve.�Vacuum breaker valve for pump.�PLC controls includes destination selector

switch, and automatic shutdown on high-level signal.

�In-line filter protects vacuum blower.

Conveying rates in excess of 50,000 lbs./hr.

Customized controls are provided with graphic panels that indicate component operation and include a variety of level signals and operating lights to the system requirements.

Hamilton will provide a turn-key system, including storage silos, in-plant blending equipment, processing machine filling and all auxiliary equipment as well as supervision of installation.

George

Rectangle

George

Typewritten Text



weLded steeL siLos

Hamilton’s welded silos are shipped factory constructed and ready to install in one day and use immediately. Because there are no bolts, seams or gaskets, material hang up points are eliminated. The inside of the welded steel silo is epoxy coated to keep your material contamination free. The outside is primed and enamel coated to prevent rusting. Welded aluminum or stainless steel silos require no external painting or internal epoxy coating. The welded silos are guaranteed to be water tight.

Hamilton offers welded silos in a variety of storage capacities from 1120 cubic feet to 6595 cubic feet. Two cone configurations are available. Cone configuration is determined by the type of material to be stored. Silos formed for pellet storage usually have a 45° cone bottom. For powder and hard to flow materials the silo is fitted with a 60° cone. The Hamilton sales team is ready to help you select the size, style and features that will best suit your storage needs.

Welded silos are delivered to your plant via a dedicated delivery truck. A crane is used to erect the silo. Hamilton installation crews can set the silo on the pad, connect all accessories and install the unloading and conveying system to get the plant up and running.

�Roof vent (powder filter optional)

�Perimeter guard rail with toe board

�Roof man-way

�Ladder system

�Slide shut-off gate (pelletized materials)

�Access door

�Epoxy interior coating

�Primed and enamel exterior finish

FEATURES:

A (ft.) (dia.) B (ft.) Shell full volume (cu.ft.)

9 24 1240

9 32 1750

9 40 2260

9 48 2770

12 24 2095

12 32 3000

12 40 3905

12 48 4810

12 56 5715

12 60 6140

12 64 6595

A (ft.) (dia.) B (ft.) Shell full volume (cu.ft.)

9 24 1120

9 32 1630

9 40 2140

9 48 2650

12 24 1780

12 32 2685

12 40 3590

12 48 4495

12 56 5400

12 60 5855

12 64 6310

George

Rectangle

George

Typewritten Text



surge bins

STANDARD FEATURES:

�2 x 2 x 1/4" Angle Legs (48" sq. Bins)�3 x 3 x 1/4" Angle Legs (60" & 72" Bins)�14 ga. Hopper (48" sq. Bins)�12 ga. Hopper (60" & 72" Bins)�Bolt Down Foot Pads Loader Mounting�Distribution Box Discharge Flange (16 1/4" x 16 1/4")

�Cut Out (250 lbs. Max)

Hamilton offers a complete line of in plant surge bins for convenient storage of a variety of blended or virgin materials. Units can be used as a stand alone, in-plant storage system or as an integral part of existing outdoor storage silos. Either way, these units are very adaptable and can be customized to meet your specific needs.

With a standard range of bin capacities from 38 cubic feet to 264 cubic feet, 45º or 60º bottoms and a variety of discharge options. For critical applications, bins can be constructed of stainless steel or aluminum.

Easy access to the interior of the bin is provided by a hinged cover on one-third of the top of the bin. The other two-thirds of the cover remains stationary. Hamilton surge bins are pre drilled to accept your choice of Hamilton’s loading and blending equipment.

OPTIONAL FEATURES:

�12" x 12" Slide Gate�6" x 6" Discharge Opening�6" Slide Gate�4" Discharge Spout w/ Slide Gate�Filter in Cover�1 1/4" Pipe Stub in�Hopper Level Control�4" View Window�Platform w/ Ladder

SPECIFICATIONS:Model No. Description Capacity Discharge

Height Overall Height

Model No. Discharge Height

Overall Height

75.6100.38 48" x 48", 45 Deg. Hopper, 21" Sidewall 38 cu.ft. 18" 4' - 9" 75.6101.38 60" 8' - 3"

75.6100.54 48" x 48", 45 Deg. Hopper, 33" Sidewall 54 cu.ft 18" 5' - 9" 75.6101.54 60" 9' - 3"















George

Rectangle

George

Typewritten Text



PneumatiC tiLter

The Hamilton Pneumatic Ground Entry Gaylord Tilter is designed to assist in the vacuum unloading of gaylord containers. The automatic tilting feature allows complete removal of material from the container with little or no assistance from your operator.

The adjustable regulator permits setting initial lift at any desired weight. This unit will lift 1000Lb with only 100 psi. air pressure! Normal operation is to begin tilting action when the box is around half empty. Hamilton Tilt Tables are durable and easy to maintain. We use heavy duty pillow block bearings to ensure smooth controlled pivoting. Our seven gauge top deck is reinforced with structural steel to make it durable enough to withstand years of abuse.

These units will reduce labor cost by freeing your operator from tending his raw material flow. They also reduce material waste with the effortless, complete emptying of your container.

�Automatic or Manual Tilt Action�Hand Lever Controlled�Flow Control to adjust Operating Speed�7 Gauge Steel Deck�Adjustable Height Vacuum Wand Holder�1" Pillow Block Pivot Bearings�Double Convoluted Industrial Air Bag�45 Degree Tilt Angle

STANDARD FEATURES:

0

200

400

600

800

1000

1200

0 20 40 60 80 100

LIFT CAPACITY CHART

Air pressure required for initial lift

�Foot Pedal Control�Valve Pneumatic Turbine Vibrator with Controls�110v Electric Vibrator with Controls�Safety Ratchet

OPTIONAL FEATURES:

George

Rectangle

George

Typewritten Text



water temPerature ControLLertemPerature ControLLers

�PID multi-stage temperature control system can �Pipe heaters are made from stainless steel.maintain a mould temperature with accuracy of �Accurate temperature control achieved by indirect +/1°C. cooling and quick heat transfer by means of steady

�Multiple safety devices can automatically detect cooling water flow.abnormal performance and indicate this via visible �Automatic water filling to quickly reduce water alarm. temperature to set-point.

�Reliable mains isolator to cut power supply in case of �Inner parts made from stainless steel to ensure emergency. corrosion-free operation.

�German made SPECK pump features high pressure �Attractive appearance, easy to access and maintain.and stable performance.

STM-PW SERIES FEATURES:

STM-607-PW

The STM-W series and STM-PW series of standard and high temperature water heaters are used to heat up the mould and maintain this temperature, although they can be used in other similar applications. High temperature water from the mould is cooled by direct cooling and then sent to the pipe heaters via high-pressure pump for heating to a constant temperature. With our optimized design, water can reach a maximum of 120°C with the STM-W series and 160°C with the STM-PW series and the OMRON temperature controller can maintain an accuracy of +/- 1°C.

�PID multi-stage temperature control system can �Stainless steel pump features continuous flow and maintain a mould temperature with accuracy of +/- stable pressure.1°C. �Accurate temperature control achieved by direct

�Multiple safety devices can automatically detect cooling and quick heat transfer by automatic water abnormal performance and indicate this via visible supply facility.alarm. �Inner parts made from stainless steel to ensure

�Reliable mains isolator to cut power supply in case of corrosion-free operation.emergency. �Pump pressure gauge.

STM-W SERIES FEATURES:

STM-607-W

1) In order to maintain stable temp. of heat transfer media, cooling water pressure should be no less than 2kg/cm² , but also no more than 5kg/cm².2) "D" stands for dual-heating zone.

Note:

SPECIFICATIONS:

Model Max. temp.

Pipe heater (kw)

Pump power (kw)

Max pump flow

(L/min)

Max. pump pressure

(bar)

Heating tank

number

Heating tank capacity (L)

Cooling method

Mould coupling

(inch)

Dimensions (mm)

(HxWxD)

Weight (kg)

STM-607W 6 0.55 30 5.0 1 2.5 3/8" (2x2) 630x280x735 50

STM-607W-D 6x2 0.55x2 30x2 5.0 2 2.5x2 3/8" (8x2) 630x560x735 100

STM-910W 9 0.75 45 6.0 1 2.5 3/8" (4x2) 630x280x735 72

STM-910W-D 9x2 0.75x2 45x2 6.0 2 2.5x2 3/8" (8x2) 630x560x735 140

STM-1220W 12 1.5 90 6.0 2 5 3/8" (4x2) 690x280x735 101

STM-2440W

120 C

24 2.8 160 6.0 2 6.6

Direct

1-1/2" (1x2) 790x340x810 140

STM-607-PW 6 0.5 30 5.5 1 3.8 3/8" (2x2) 740x320x760 94

STM-910-PW 9 0.75 45 6.0 1 3.8 3/8" (2x2) 740x320x760 101

STM-1220-PW

160 C

12 1.5 90 5.5 1 3.8

Indirect

1" (1x2) 790x340x810 102

George

Rectangle

George

Typewritten Text



temPerature ControLLers

The STM series standard oil heaters are used to heat up the mould and maintain this temperature, although they can be used in other similar applications. High temperature oil from the mould is returned to the cooling tank and cooled by indirect cooling. It is then pressurised by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature.

With our optimised design, oil can reach a maximum of 200°C and the OMRON temperature controller can maintain an accuracy of +/- 1°C.

�PID multi-stage temperature control system can �Reliable mains isolator to cut power supply in case of maintain a mould temperature with accuracy of emergency.+/1°C. �Stainless steel pipe heaters.

�Multiple safety devices including power reverse �German made SPECK pump features high pressure and phase protection, pump overload protection, stable performance.overheat protection and low level protection that �High temperature heat transfer oil is stable up to 200°C, can automatically detect abnormal performance and suitable for long and continuous operation.indicate this via visible alarm. �Attractive appearance, easy to access and maintain.

FEATURES:

STM-910

A. Cooling water inlet F. Pump L. Oil outletB. Cooling water G. Cooling tank M. Temp. sensor outlet (EGO)H. Pipe heaterC. To mould N. Micro-switchI. Oil tankD. From mould O. Oil inletJ. Pressure meterE. Solenoid valve P. Floating ballK. Level mark

WORKING PRINCIPLE

High temperature oil from the mould (D) is returned back to the cooling tank, and then sent to the heating tank by the pump (F) to be heated by the pipe heater (H), and then onto the mould.

In this process, any oil overheating activates the solenoid valve (E) to allow cooling water into the cooling tank (G) to reduce the oil temperature. If the oil reaches the upper limit of the temperature sensor, the machine will activate the overheat alarm. If the floating ball (P) in the oil tank (I) falls below a safe level, the machine will activate the low level alarm by means of a microswitch (N).

SPECIFICATIONS:

Model Max. temp.

Pipe heater (kw)

Pump power (kw)

Max pump flow

(L/min)

Max. pump

pressure (bar)

Heating tank

number

Main/sub. oil tank

(L)

Cooling method

Mould coupling

(inch)

Dimensions (mm)

(HxWxD)

Weight (kg)

STM-607 6 0.55 30 5.0 1 5/3.2 3/4" (2x2) 630x280x735 60

STM-607-D 6x2 0.55x2 30x2 5.0 2 5x2/3.2x2 3/4" (4x2) 630x560x735 120

STM-910 9 0.75 45 6.0 1 8/15 3/4" (2x2) 630x280x735 74

STM-910-D 9x2 0.75x2 45x2 6.0 2 5/3.2 3/4" (4x2) 630x560x735 145

STM-1220 12 1.5 90 6.0 1 5x2/3.2x2 1" (1x2) 790x340x810 103

STM-2440

200 C

24 2.2 160 6.0 2 10/15

Indirect

1-1/2" (1x2) 790x360x910 150

"D" stands for dual-heating zones.Note:

oiL temPerature ControLLer

George

Rectangle

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text



ChiLLers

The SIC-A-R2 and SIC-W-R2 series of portable air- and water-cooled water chillers provide a self-contained source of chilled water for your process needs and are portable from machine to machine. Equipped with a full cabinet enclosure with tool-less entry for ease of servicing.

The SIC-A-R2 series of portable air cooled chillers with a 7 - 35°C cooling range feature environmentally friendly R410A refrigerant. Designed with a vertical air discharge design that enhances comfort in your plant by carrying heat up and away from your process and your operators, the chillers have a +/-0.1°C accuracy.

The SIC-W-R2 series of portable water chillers utilize plant water (tower water, city water or well water) to dissipate the process heat removed by the refrigeration system.

�Cooling range 7-35°C �Pressure guages�Stainless steel insulated water tank �Hot gas by-pass valve�Anit-freeze thermostat �Automatic fill valve�Uses ozone-friendly R410A refrigerant, which �Liquid line solenoid valve and shut-off valve

improves coefficient of performance �Filter dryer and moisture indicator�Refrigerant loop controlled by high and low pressure �Head pressure control via fan motor cycling

switches to ensure stable operation �Main power disconnect�Finger safe electrical components �PID temperature controller accurate to +/- 0.1°C�Fill diagnostics panel �High quality fin style condenser�Brazed plate exchanger �Powder coated frame and enclosure�Compressor and pump overload protection �Caster mounted

SIC-A-R2 SERIES FEATURES:

SIC-12A-R2 SIC-33W-R2

�Cooling range 7-25°C �Liquid line solenoid valve and shut-off valve�Stainless steel insulated water tank �Filter dryer and moisture indicator�Anit-freeze thermostat �Head pressure control via fan motor cycling�Uses ozone-friendly R410A refrigerant, which �Main power disconnect

improves coefficient of performance �PID temperature controller accurate to +/- 1°C�Refrigerant loop controlled by high and low pressure �Optional middle pressure pump

switches to ensure stable operation �Tube-in-shell condenser design allows for excellent �Finger safe electrical components heat transfer and rapid cooling�Fill diagnostics panel �High quality condenser�Compressor and pump overload protection �Powder coated frame and enclosure�Pressure guages �Caster mounted�Automatic fill valve

SIC-W-R2 SERIES FEATURES:

George

Rectangle

George

Typewritten Text

George

Typewritten Text

George

Typewritten Text


George

Typewritten Text


beLt ConVeyors

PNL-2

CB-6

SV-1

Hamilton offers three types of belt conveyors that feature reliable performance and ease of operation. The height and angle of all conveyors are adjustable to suit requirements.

The CB series inclined belt conveyors are suitable for conveying sprues or finished product to a higher level beside the moulding machine.

The SV series declined belt conveyors are suitable for conveying finished product fed from robots to a lower level.

The PNL series horizontal belt conveyors are suitable for use with CB or SV series conveyors or as stand-alone units.

�Adjustable angle from 0 to +25º �Height adjustable level 350mm to 1350mm from �Non-slip PU belt with flights height 20mm, pitch ground to belt

500mm �Three phase motor with gearbox for voltages �Sidewalls with 75mm height 230/400/460/575V, frequency 50/60Hz�Fixed speed of 6 metres/minute

PNL SERIES HORIZONTAL CONVEYOR FEATURES:

CB SERIES INCLINED CONVEYOR FEATURES:

�Mounted on patented "FUTURE" model support stand �Fixed speed of 4 metres/minute�Non-slip PU belt with flights height 20mm, pitch �Height adjustable support legs

500mm �Three phase motor with gearbox for voltages �Sidewalls with 95mm height 230/400/460/575V, frequency 50/60Hz

SV SERIES DECLINED CONVEYOR FEATURES:

�Non-slip PU belt �Mounted on height adjustable support legs�Sidewalls with 34mm height �Three phase motor with gearbox for voltages �Fixed speed of 6 metres/minute 230/400/460/575V, frequency 50/60Hz�Adjustable angle from -25º to +25º

George

Rectangle

George

Typewritten Text


rcontact us at 317-770-3680 or by email at … · 2019-04-29 · universal orientation easy flow...

Documents