1

23425

Connections and Quickstart Guide

23425

rDoc k-un

irDock-uni

2

Important Safety Instructions...

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3

Contents

Power Adaptor Setup .............................................................................................4

Docking Your Device .............................................................................................5

Standalone Operation ............................................................................................6Connections for any amplifier .................................................................................6rDock-uni remote control .........................................................................................7

Legal Information ..................................................................................................8

Worldwide Guarantee ............................................................................................9Claims under guarantee ............................................................................................9Problems? .......................................................................................................................9

4

Click!

1 2

3

EU

UK

US

Power Adaptor Setup

5

Docking Your Device

iPhone 5iPad (4th generation)iPod touch (5th generation) iPod nano (7th generation)

6

Connect power adaptor, USB cable and audio interconnects.

RIGHTLEFTSPDIFUSBDC 5V/3A

AUX

L

R

Connections for any amplifier

Standalone Operation

iPhone 4SiPhone 4iPad (3rd generation)iPad 2

Amplifier / Audio system

7

OK

rDock-uni remote control

Please remove the plastic tab to connect the supplied batteries before use.

OK

Turn the dock on/off.

Mute.

Increase volume.

Decrease volume.

Selects current track.

Select music by playlist, artist etc.

Jump to previous track.

Start or pause playback.

Jump to the next track.

Play selection continuously.

8

Specification

DAC Burr-Brown/TI PCM5102

Frequency response 10Hz –20kHz, +0 –0.2dB

Total Harmonic Distortion + Noise 0.002%

Signal-to-noise ratio (A-weighted) 106dB (24-bit)

Maximum output level 2.15V RMS

Power requirements 5V DC, 3A

Dimensions 100mm x 80mm x 65mm

Weight 400g

Accessories supplied PSUDigital phono-phono cableStereo phono–phono cableManualRemote with CR2025 battery

E&OE. All specifications are typical

9

Apple, Mac, Mac OS, iTunes, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc.

"Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

Legal Information

FCC INFORMATION (FOR US CUSTOMERS)

1. PRODUCTThis product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCTThis product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by ARCAM may void your authority, granted by the FCC, to use the product.

3. NOTEThis product has been tested and found to comply with the limits for a Class B digital device, persuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the product into an outlet on a circuit different from that to which the receiver is connected.• Consult the local retailer authorized to distribute this type of product or an experienced radio/TV

technician for help.

10

Worldwide Guarantee

Correct disposal of this product This marking indicates that this product should not be disposed with other household waste throughout the EU.

To prevent possible harm to the environment or human health from uncontrolled waste disposal and to conserve material resources, this product should be recycled responsibly.

To dispose of your product, please use your local return and collection systems or contact the retailer where the product was purchased.

This entitles you to have the unit repaired free of charge for two years after purchase, provided that it was originally purchased from an authorised Arcam dealer. The manufacturer can take no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/or repair, neither can they accept responsibility for damage or loss occurring during transit to or from the person claiming under the guarantee.

The warranty covers:Parts and labour costs for two years from the purchase date. After two years you must pay for both parts and labour costs. The warranty does not cover transportation costs at any time.

Claims under guarantee

This equipment should be packed in the original packing and returned to the dealer from whom it was purchased, or failing this, directly to the Arcam distributor in the country where the product was purchased.

It should be sent carriage prepaid by a reputable carrier – not by post. No responsibility can be accepted for the unit whilst in transit to the dealer or distributor and customers are therefore advised to insure the unit against loss or damage whilst in transit.

For further details contact Arcam at:

Arcam Customer Support Department, Stirling House, Waterbeach, CAMBRIDGE, CB25 9QE, England

or www.arcam.co.uk.

Problems?

If your Arcam dealer is unable to answer any query regarding this or any other Arcam product please contact Arcam Customer Support at the above address and we will do our best to help you.

11

23425

WATERBEACH, CAMBRIDGE, CB25 9QE, ENGLAND

SH261 Issue 1

www.arcam.co.uk