reaction blocks for circular-top hot plate/stirrers€¦ · hot plate/stirrers new sizes ... or...

Reaction Blocks for Circular-top Hot Plate/Stirrers

■ New sizes — Easy to use

■ Complete systems

■ Radley’s and ACE brand

■ Economical and efficient

13698-09

13698-05

13698 DynaBloc Base Plate Anodized aluminum base plate for use with 13698, 13689 and 13696 DynaBloc heads and fits the standard circular 135mm diameter stirrer/hotplate top. The base has a hole in the side to accommodate a standard thermocouple sensor to measure the heat at the base.

I.D., mm O.D., mm Order Code135 164 13698-05

13698 DynaBloc Cylindrical, for Vials & Tubes Anodized aluminum blocks for use with 13698-05 Base Plate. Pre-drilled openings for standard-size glass vials and tubes including small dram vials, chromatography vials, scintillation vials, EPA vials, VOC vials, and standard test tubes. The blocks can be separated from the base plate for easy cleaning and handling. All blocks have a predrilled hole to accommodate sensor probe and have another hole to accommodate the T-handle extractor for easy removal of the block, even when hot. Order base plate, block and T-handle separately.

Numberof Holes For Vessel Size

Hole Size, mm

OrderCode

18 20 mL Vial 28 x 27.6 13698-1218 40mL Vial 28 x 50.0 13698-13

18 10mL Reaction V-Vial® or 25x100mm tubes 26 x 50.0 13698-14

28 4 Dram/16mL Vial 22 x 35.6 13698-20

54 1mL Reaction V-Vial® or 12 x 75mm tubes 13 x 27.6 13698-21

40 16mm O.D. tubes 17 x 50.0 13698-3028 5mL Reaction V-Vial® 22 x 35.6 13698-3736 2 Dram/8mL Vial 17 x 27.6 13698-3852 1 Dram/4mL Vial 15 x 27.6 13698-4154 0.5 Dram or 1.2mL Chrom. Vial 13 x 27.6 13698-49

ACCESSORY

T-handle Extractor (fits all ACE blocks) 13698-09

ACE DynaBloc anodized aluminum blocks are ideal for heating and mixing solutions in a variety of vials and small round bottom flasks.

ACE DynaBloc heating blocks use a universal base plate (13698-05), which fits easily on top of any circular-top hotplate stirrers such as the popular IKA Model RCT or Thermolyne RT.

The ACE DynaBloc system is low-cost, and its efficient heating blocks utilize a wide range of standard laboratory glassware. They can be used for stirring and/or heating multiple samples in applications such as digestion, extraction, distillation, and synthesis. The system is easy to set up, allows switching from vials to flasks in seconds, and is also easy to disassemble for cleaning. The configuration of the vial/flask holes allows for optimum heating and mixing in every well.

Use ACE DynaBloc heating blocks with your standard labware and hotplates for highly economical and efficient heating/stirring.

13698-12

ACCESSORIES for 13696, 13698 and 13699Order Code

Flask/Condenser Clamp Device 13699-63Stainless Steel Short Support Rod (31 cm) 13699-40Stainless Steel Long Support Rod (61 cm) 13699-44

13699 DynaBloc* Cylindrical, for Flasks Anodized aluminum blocks are machined to accommodate small round bottom flasks and small Erlenmeyer flasks. The blocks fit the universal base plate, and have one hole to accommodate the extension rods and the T-handle extractor which assists moving the blocks even while hot. The blocks also have a hole for a temperature sensor probe. Short support rod (31cm long) is for supporting flasks in the flask blocks; long (61 cm) rod supports condensers and other taller glass apparatus. Clamp devices are necessary to stabilize glassware while in blocks. Order base plate, block, clamp device, and support rod separately.

# of Holes For Vessel Size

Well Dia., mm

Block Height

OrderCode

3 125mL Erlenmeyer Flask 69.0 27.6mm 13699-033 250 or 300 mL Round Bottom Flask 62.2 27.6mm 13699-044 100mL Round Bottom Flask 60.3 27.6mm 13699-065 50mL Round Bottom Flask 48.5 27.6mm 13699-09

13696 DynaBloc* Segmented New heating/mixing blocks with even more versatility. These aluminum blocks have three segments within each block that have different size holes per each segment to accommodate a broad range of a flask or vials at the same time. Chose different size vials, tubes or a flask to run simultaneously. Block fits standard base plate and blocks fit all standard size 135mm diameter round top hotplate/stirrers. Order base plate, block, clamp device, and support rod separately.

# of Holes For Vessel Size

Block Height

OrderCode

12 12 8

0.5 Dram Vials 1 Dram Vials 2 Dram Vials

30.8mm 13696-03

12 4 8

1 Dram Vials 4 Dram Vials 2 Dram Vials

30.8mm 13696-07

10 1 4

16 mm Tubes 50 mL Round Bottom Flask 40 mL Vials

53mm 13696-11

*All these items use 13698-05 Base Plate.

1-800-223-4524 ■ www.aceglass.com

13699-04

13696-11

Complete Instatherm/Block System A combination of two great ideas, why not the best and most accurate way of heating combined with the new DynaBloc technology.

Instatherm baths now available with newly engineered aluminum Dynablocs that fit into the bath body and hold popular size vials and tubes. Just use your existing 1,200 mL bath and block for precise heating or place the entire unit on any magnetic stirrer to combine stirring with Instatherm® heat. Use existing equipment or buy a complete system.

9600-20 Complete System (contains all items listed below)

Order Code9600-20

Description Order Code

Aluminum Block for 16mm Tubes 13697-16Temperature Controller, J Type, Complete with J Type Sensor 12125-14

Troemner Magnetic Stirrer (7" x 7") 13470-1612" Aluminum Rod 11166-371,200 mL Instatherm® bath, w/clip & cord 9601-46

Instatherm/Heat Blocks ★

Individual Instatherm® Blocks*Individual blocks for use with Instatherm® baths only. Block diameter (141mm) is for use in the 9601-16, 1,200mL Instatherm® bath.

Description Block Height Order Code

For 22, 2 Dr./8mL or 17 mm O.D. vials 30.8mm 13697-04For 14, 4 Dr./16mL or 22mm O.D. vials 38.8mm 13697-08For 24, 16mm O.D. tubes 50mm 13697-16For 8, 40mL or 28mm O.D. vials 50mm 13697-40

ACCESSORY

T-Handle Extractor (fits all ACE blocks) 13698-09

ACE has several brands and styles of stirrer/hotplates available. See our website for more details.

*These blocks require NO base plate.

13698-09

13697-04

9600-20

9601-335Bath Kit Complete ★Economy

Consists of one 9601-16 bath plus one 12125-14 Economy Temperature Controller, one 9601-30 clip, and one 12110-17 Type “J” Thermocouple Temperature Sensor and cord.

Order Code9601-335

9601-352Bath Kit Complete ★with Removable Cord

Consists of one each 9601-12, 9601-14 and 9601-16 baths, three 9601-30 clips, three 9698-16 cords, plus one 12127-30 Temperature Controller with one 12110-17 Type “J” Thermocouple Temperature Sensor.

Order Code9601-352

Bath also available with permanent chord:

Order Code9602-364

For Glass Vessels Replaces open-coil immersion heaters banned by most safety departments.

ACE Instatherm Oil Bath Controller Kits ★

Complete Bath Kits

for your convenience

See our website or request our Instatherm® brochure for more

information.

Vessels DynaBlocs Stir Bars

6976-07125mL

6897-04 125mL

13699-0369 mm diameter3 Holes

13654-34

PTFE withPivot Ring

13560-01

X-shaped PTFE 19mm

6887-24250mL

6887-25 300mL

13699-0462.2 mm diameter3 Holes

13655-29

PTFE withPivot Ring

13560-01

X-shaped PTFE 19mm

6887-21100mL


13655-29

PTFE withPivot Ring

13560-01

X-shaped PTFE 19mm

6887-2050mL


13655-25

PTFE withPivot Ring

13560-01

X-shaped PTFE 19mm

8780-2920mLClear Vial

8781-12 20mL

Amber Vial

13698-1228 mm I.D. x 27.6mm Hgt.,18 Holes

13666-08PTFE “Fin” Plug15.9mm

8780-3040mLClear Vial

8781-35 40mL

Amber Vial

13698-1328 mm I.D. x 50mm Hgt.,18 Holes


8782-1010mLReactionVial

8463-23 25mm x

150mm tubes


13668-02PTFE “V” Vane

13666-08 PTFE “Fin” Plug

15.9mm

8780-084 dram/16mL Clear Vial



8782-011mLReactionVial

8456-09 12mm x

75mm tube




7.9mm

8463-0916mm x 100mm tube8463-1116mm x 125mm tube8463-1316mm x 150mm tube



Quick Selection Guide

Vessels DynaBlocs Stir Bars

8782-055mL Reaction Vial



8780-042 Dr./8mLClear Vial

8781-08 2 Dr./8mL

Amber Vial



8780-021 Dr./4mLClear Vial

8781-06 1 Dr./4mL

Amber Vial



8780-010.5 Dr./2mLClear Vial

8781-02 0.5 Dr./2mLAmber Vial


13658-12PTFE Micro Bar

Vessels Segmented (3 each) Blocks Stir Bars

8780-01, 8781-02, 8456-090.5 Dr./2mL Clear/Amber Vials, 12x75mm tubes

13696-03$225.00

13mm I.D. x 27.6mm Hgt.,12 Holes

13658-12 PTFE Micro Bar

8780-02, 8781-061.0 Dr./4mL Clear/Amber Vials



8780-04, 8781-08, 8463-092.0 Dr./8mL Clear/Amber Vials, 16mm Tubes


13666-04 or 13666-06 PTFE “Fin” Plug

8780-02, 8781-061.0 Dr./4mL Clear/Amber Vials

13696-07$225.00



8780-04, 8781-08, 8463-092.0 Dr./8mL Clear/Amber Vials, 16mm Tubes

17 mm I.D. x 27.6mm Hgt.,8 Holes

13666-04 or 13666-06 PTFE “Fin” Plug

8780-084.0 Dr./16mL Clear/Amber Vials

22 mm I.D. x 27.6mm Hgt.,4 Holes


6887-2050mL Round Bottom Flask

13696-11$225.00

48.5mm well dia. x 50mm Hgt., 1 Hole

13654-34 or 13560-01

8463-0916x100mm tubes

17mm I.D. x 50mm Hgt.,10 Holes


8780-30, 8781-3540mL Clear/Amber Vials

28 mm I.D. x 50mm Hgt.,4 Holes


Quick Selection Guide

P.O. Box 688 • Vineland, NJ 08362-0688 • 856-692-3333 • Fax: 856-692-8919

TOLL-FREE: 1-800-223-4524 • FAX: 1-800-543-6752

www.aceglass.com email: [email protected]

Net Prices and specifications subject to change without notice.

© 2017 Ace Glass, Inc. All rights reserved. 11/09/17

reaction blocks for circular-top hot plate/stirrers€¦ · hot plate/stirrers new sizes ... or...

Documents