recommended thinner guide
TRANSCRIPT
Recommended Thinner GuideA guide to our range of Thinners and compatible Protective Coating products
38 HI TEMP™ 400
39 HI TEMP™ 600
40 INDUSTRIAL ALUMINIUM
41
42 LUXAFLOOR® ACS
43 LUXAFLOOR® CP
44 LUXAFLOOR® ECO 2
45 LUXAFLOOR® EXPRESS PRIMER
46 LUXAFLOOR® FCF
47 LUXAFLOOR® FILLER
48 LUXAFLOOR® LGE
49 LUXAFLOOR® HSG
50 LUXAFLOOR® PTX
51
52 LUXAFLOOR® WB SEALER
53 LUXAFLOOR® WB
54 LUXAPRIME® ETCH
55 LUXAPRIME® UMP
56 LUXAPRIME® ZP
1 ACRATHANE® IF
2 ACRATHANE® IF CLEARCOAT
3
4 AEROMASTER®
5 APEXIOR® NO. 1
6 CONGARD®
7 DURATION® P23
8 DURATION® T74
9 DURATION® T80
10 DURATION® X21
11 DUREBILD® HSE
12 DUREBILD® STE
13 DUREBILD® STE GF
14 DUREBILD® STE MIO
15 DURECURE® PAC
16 DUREKEM® MPP
17 DUREMAX® GFX
18 DUREMAX® GPE
19 DUREMAX® GPE MIO
20 DUREMAX® GPE ZP
21 DUREMAX® HBE
22 DUREPON® EZP
23 DUREPON® FRX
24 DUREPON® P14
26 DURETHANE™
27 DUREZINC® i90
28 ENVIROPOXY® WBE
29 EPIGLOSS® 4 FINISH
30 FERREKO® NO. 3
31
32 FERREKO® NO. 6
33 FERRODOR® 810
34 FLEXITUFF®
35 FLEXITUFF® DM-8
36 FLEXITUFF® HP-7
37 HI TEMP™ UNPRIME
57 LUXATHANE® DTM
58 LUXATHANE® HPX
59 LUXATHANE® R
60 LUXATHANE® SPX
61
62 LUXEPOXY® 4 WHITE PRIMER
63 LUXEPOXY® FILLER
64 LUXEPOXY® UHB
65 LUXEPOXY® SEALER
68 METALSHIELD® ETCH PRIMER
69 METALSHIELD® EPOXY
71 METALSHIELD® PREMIUM
66 METALSHIELD® ALL SURFACE PRIMER
67 METALSHIELD® COLD GALV PRIMER
70 METALSHIELD® HIGH BUILD ZP PRIMER
73 METALSHIELD® PRIMER FINISH
74 METALSHIELD® QD PRIMER
75 METALSHIELD® QD TOPCOAT
76 QUANTUM® 221
77 QUANTUM® CLEARCOAT
78 QUANTUM® FX
79 QUANTUM® V92
80 ROADMASTER® A1
81 ROADMASTER® WB2
82 SURFACESHIELD™ FP
83 SURFACESHIELD™ HD
84 SURFACESHIELD™ S
85 WEATHERMAX® HBR
86 WEATHERMAX® HBR MIO
87 ZINC RICH 1P
88 ZINCANODE® 202
89 ZINCANODE® 402
72 METALSHIELD® PREMIUM ALUMINIUM
Recommended Thinner Guide
Index
Page 1 Page 2 Page 3 Page 4 Page 5
ACRATHANE® IF SPARKLING ALUMINIUM
25 DUREPON® 66
FERREKO® NO. 5
LUXACHLOR® FINISH
LUXAFLOOR® ROLLCOAT
LUXATHANE® MPX
August 2021
Recommended Thinner Guide
Product Recommended thinnerURETHANE
THINNER DUTHIN®
040 SLOW THINNER
DUTHIN® 511 X-SLOW
THINNER
DUTHIN® 450 COLD WEATHER THINNER
EPOXY THINNER
CR REDUCER DUTHIN® 340 SPRAY
THINNER
DUTHIN® 540 BRUSH
THINNER
METALSHIELD® SPRAY
THINNER
METALSHIELD® BRUSH
THINNER
POTABLE WATER
OTHER
965-63023 965-42166 920-89963 920-81942 920-08925 965-63020 965-63034 965-08410 965-H0009 965-H0010
1 ACRATHANE® IF
2 ACRATHANE® IF CLEARCOAT
3 ACRATHANE® IF SPARKLING ALUMINIUM
4 AEROMASTER®
5 APEXIOR® NO. 1 Mineral Turpentine
6 CONGARD®
7 DURATION® P23
8 DURATION® T74
9 DURATION® T80
10 DURATION® X21
11 DUREBILD® HSE
12 DUREBILD® STE
13 DUREBILD® STE GF
14 DUREBILD® STE MIO
15 DURECURE® PAC DUTHIN® 799 (965-82095)
16 DUREKEM® MPP
17 DUREMAX® GFX
18 DUREMAX® GPE
Recommended Thinner Guide Page 1 August 2021
Spray Brush Roller Cold Weather* Hot Weather* Immersion
*Thinners are tested at a typical laboratory temperature range of 20-25°C and 50% relative humidity. If a slower drying (slower releasing) thinner is required in a low humidity environment, consider use of the hot weather thinners regardless of the temperature. If a fast drying (faster releasing) thinner is required in high humidity, consider the use of cold weather thinners regardless of the temperature. However, in all cases users should operate within the temperature and humidity constraints specified in the product datasheet and only use options matched to the specific product.
Recommended Thinner Guide Continued
Product Recommended thinnerURETHANE
THINNER DUTHIN®
040 SLOW THINNER
DUTHIN® 511 X-SLOW
THINNER
DUTHIN® 450 COLD WEATHER THINNER
EPOXY THINNER
CR REDUCER DUTHIN® 340 SPRAY
THINNER
DUTHIN® 540 BRUSH
THINNER
METALSHIELD® SPRAY
THINNER
METALSHIELD® BRUSH
THINNER
POTABLE WATER
OTHER
965-63023 965-42166 920-89963 920-81942 920-08925 965-63020 965-63034 965-08410 965-H0009 965-H0010
19 DUREMAX® GPE MIO
20 DUREMAX® GPE ZP
21 DUREMAX® HBE
22 DUREPON® EZP
23 DUREPON® FRX
24 DUREPON® P14
26 DURETHANE™
27 DUREZINC® i90
28 ENVIROPOXY® WBE
29 EPIGLOSS® 4 FINISH
30 FERREKO® NO. 3
32 FERREKO® NO. 6
33 FERRODOR® 810 Mineral Turpentine
34 FLEXITUFF® DO NOT THIN
35 FLEXITUFF® DM-8 DO NOT THIN
36 FLEXITUFF® HP-7 DO NOT THIN
37 HI TEMP™ UNPRIME
Recommended Thinner Guide Page 2
25 DUREPON® 66
August 2021
Spray Brush Roller Cold Weather* Hot Weather* Immersion
*Thinners are tested at a typical laboratory temperature range of 20-25°C and 50% relative humidity. If a slower drying (slower releasing) thinner is required in a low humidity environment, consider use of the hot weather thinners regardless of the temperature. If a fast drying (faster releasing) thinner is required in high humidity, consider the use of cold weather thinners regardless of the temperature. However, in all cases users should operate within the temperature and humidity constraints specified in the product datasheet and only use options matched to the specific product.
31 FERREKO® NO. 5
Recommended Thinner Guide Continued
Product Recommended thinnerURETHANE
THINNER DUTHIN®
040 SLOW THINNER
DUTHIN® 511 X-SLOW
THINNER
DUTHIN® 450 COLD WEATHER THINNER
EPOXY THINNER
CR REDUCER DUTHIN® 340 SPRAY
THINNER
DUTHIN® 540 BRUSH
THINNER
METALSHIELD® SPRAY
THINNER
METALSHIELD® BRUSH
THINNER
POTABLE WATER
OTHER
965-63023 965-42166 920-89963 920-81942 920-08925 965-63020 965-63034 965-08410 965-H0009 965-H0010
38 HI TEMP™ 400
39 HI TEMP™ 600
40 INDUSTRIAL ALUMINIUM Mineral Turpentine
LUXACHLOR® FINISH
42 LUXAFLOOR® ACS
43 LUXAFLOOR® CP DO NOT THIN
44 LUXAFLOOR® ECO 2
45 LUXAFLOOR® EXPRESS PRIMER
46 LUXAFLOOR® FCF DUTHIN® 700 (965-82095)
47 LUXAFLOOR® FILLER DO NOT THIN
48 LUXAFLOOR® LGE
49 LUXAFLOOR® HSG
50 LUXAFLOOR® PTX
LUXAFLOOR® ROLLCOAT
52 LUXAFLOOR® WB SEALER DO NOT THIN
53 LUXAFLOOR® WB
54 LUXAPRIME® ETCH
55 LUXAPRIME® UMP Vinyl Thinner (921-00464)
56 LUXAPRIME® ZP Mineral Turpentine
Recommended Thinner Guide Page 3 August 2021
Spray Brush Roller Cold Weather* Hot Weather* Immersion
*Thinners are tested at a typical laboratory temperature range of 20-25°C and 50% relative humidity. If a slower drying (slower releasing) thinner is required in a low humidity environment, consider use of the hot weather thinners regardless of the temperature. If a fast drying (faster releasing) thinner is required in high humidity, consider the use of cold weather thinners regardless of the temperature. However, in all cases users should operate within the temperature and humidity constraints specified in the product datasheet and only use options matched to the specific product.
41
51
Recommended Thinner Guide Continued
Product Recommended thinnerURETHANE
THINNER DUTHIN®
040 SLOW THINNER
DUTHIN® 511 X-SLOW
THINNER
DUTHIN® 450 COLD WEATHER THINNER
EPOXY THINNER
CR REDUCER DUTHIN® 340 SPRAY
THINNER
DUTHIN® 540 BRUSH
THINNER
METALSHIELD® SPRAY
THINNER
METALSHIELD® BRUSH
THINNER
POTABLE WATER
OTHER
965-63023 965-42166 920-89963 920-81942 920-08925 965-63020 965-63034 965-08410 965-H0009 965-H0010
57 LUXATHANE® DTM
58 LUXATHANE® HPX
59 LUXATHANE® R
60 LUXATHANE® SPX
62 LUXEPOXY® 4 WHITE PRIMER
63 LUXEPOXY® FILLER
64 LUXEPOXY® UHB
DO NOT THIN
65 LUXEPOXY® SEALER
DO NOT THIN
DO NOT THIN
66 METALSHIELD® ALL SURFACE PRIMER
METALSHIELD® ETCH PRIMER
THINNER (965-H0011)
67 METALSHIELD® COLD GALV PRIMER
METALSHIELD® COLD GALV
THINNER (965-H0012)
68 METALSHIELD® ETCH PRIMER
METALSHIELD® ETCH PRIMER
THINNER (965-H0011)
69 METALSHIELD® EPOXY
70 METALSHIELD® HIGH BUILD ZP PRIMER
71 METALSHIELD® PREMIUM
Recommended Thinner Guide Page 4
61 LUXATHANE® MPX
August 2021
Spray Brush Roller Cold Weather* Hot Weather* Immersion
*Thinners are tested at a typical laboratory temperature range of 20-25°C and 50% relative humidity. If a slower drying (slower releasing) thinner is required in a low humidity environment, consider use of the hot weather thinners regardless of the temperature. If a fast drying (faster releasing) thinner is required in high humidity, consider the use of cold weather thinners regardless of the temperature. However, in all cases users should operate within the temperature and humidity constraints specified in the product datasheet and only use options matched to the specific product.
Recommended Thinner Guide Continued
Product Recommended thinnerURETHANE
THINNER DUTHIN®
040 SLOW THINNER
DUTHIN® 511 X-SLOW
THINNER
DUTHIN® 450 COLD WEATHER THINNER
EPOXY THINNER
CR REDUCER DUTHIN® 340 SPRAY
THINNER
DUTHIN® 540 BRUSH
THINNER
METALSHIELD® SPRAY
THINNER
METALSHIELD® BRUSH
THINNER
POTABLE WATER
OTHER
965-63023 965-42166 920-89963 920-81942 920-08925 965-63020 965-63034 965-08410 965-H0009 965-H0010
72 METALSHIELD® PREMIUM ALUMINIUM
73 METALSHIELD® PRIMER FINISH
74 METALSHIELD® QD PRIMER
75 METALSHIELD® QD TOPCOAT
76 QUANTUM® 221
77 QUANTUM® CLEARCOAT
78 QUANTUM® FX
79 QUANTUM® V92 Duthin 700 (965-82095)
80 ROADMASTER® A1
81 ROADMASTER® WB2 DO NOT THIN
82 SURFACESHIELD™ FP
83 SURFACESHIELD™ HD DO NOT THIN
84 SURFACESHIELD™ S DO NOT THIN
85 WEATHERMAX® HBR
86 WEATHERMAX® HBR MIO
87 ZINC RICH 1P Under Powder Coating
88 ZINCANODE® 202
89 ZINCANODE® 402
Recommended Thinner Guide Page 5 August 2021
Spray Brush Roller Cold Weather* Hot Weather* Immersion
*Thinners are tested at a typical laboratory temperature range of 20-25°C and 50% relative humidity. If a slower drying (slower releasing) thinner is required in a low humidity environment, consider use of the hot weather thinners regardless of the temperature. If a fast drying (faster releasing) thinner is required in high humidity, consider the use of cold weather thinners regardless of the temperature. However, in all cases users should operate within the temperature and humidity constraints specified in the product datasheet and only use options matched to the specific product.
DuluxGroup (New Zealand) 150 Hutt Park Road, Lower Hutt, 5010 New Zealand
Australiawww.duluxprotectivecoatings.com.auT 13 23 77DuluxGroup (Australia) Pty Ltd (ABN 67 000 049 427) 1956 Dandenong Road, Clayton, 3168, Australia
New Zealandwww.duluxprotectivecoatings.co.nzT 0800 800 424
Recommended Thinner GuideAugust 2021
DPCRTGBR0001
Any advice, recommendation, information, assistance or service provided by Dulux® Protective Coatings in relation to goods manufactured by it or their use, including application, is given in good faith and is believed by Dulux® Protective Coatings to be appropriate at time of creation. Products can be expected to perform as outline provided that application conditions and procedures are followed on relevant data sheets. Specific advice should be sought from a Dulux Protective Coatings consultant especially for more corrosive and demanding environments, to obtain a tailored and appropriate solution.
®DULUX, the DuluxGroup Squares Device, ACRATHANE, AEROMASTER, APEXIOR, CONGARD, DURATION, DUREBILD, DUREKEM, DUREMAX, DUREPON, DUREZINC, ENVIROPOXY, EPIGLOSS, FERREKO, FERRODOR, FLEXITUFF, LUXACHLOR, LUXAFLOOR, LUXAPRIME, LUXATHANE, LUXEPOXY, METALSHIELD, QUANTUM, ROADMASTER, SURFACESHIELD, WEATHERMAX and ZINCANODE are registered trademarks of DuluxGroup (Australia) Pty Ltd.
™ DURETHANE, HI TEMP and UNIPRIME are trademarks of DuluxGroup (Australia) Pty Ltd.