red sky e-brochure nov2019€¦ · 11/12/2019 · &/$03 3lsh &odps .lw 6)&% 6dihw\...

$: Red Sky e-Brochure Nov2019€¦ · 11/12/2019 · &/$03 3lsh &odps .lw 6)&% 6dihw\ &deoh .lw 63 n$ 6xujh 3urwhfwru /lqhdu 6hulhv 3krwrphwulfv 0dlq 6wuhhw 5dflqh :, 86$5hg 6n\ /ljkwlqj$

Red Sky Lighting manufactures premier harsh and hazardous location LED lighting fixtures. From food processing plants to underground mining tunnels, oil rigs to bulk carriers, petrochemical plants to steel mills, our lights are designed to keep working through the toughest environments.

SeriouslySafe Lights

Hazardous Location Lighting Basics

Class I: GasesAreas in which flammable gases or vapors in the air in sufficient quantities to ignite or explode.

Class II: DustAreas in which combustible dust may be suspended in the air or accumulates on electrical equipment in quantities sufficient to ignite or explode.

Class III: FibersAreas in which easily ignitable fibers or flyings are present. Typically fibers and flyings are not suspended in the air, but can collect around machinery or on lighting fixtures.

Class I: GasesGroup A - AcetyleneGroup B - HydrogenGroup C - EthyleneGroup D - Propane

Class II: DustsGroup E - Electrically conductive dustGroup F - Carbonaceous dustGroup G - Agricultural and polymer dust

CLASSES

Division 1: Always PresentAreas in which ignitable concentrations of hazards exist under normal operation conditions and/or where hazard is caused by frequent maintenance or repair work or frequent equipment failure.

Division 2: Not Normally PresentAreas in which ignitable concentrations of hazards are normally in closed containers or closed systems. Hazards may be present due to accidental rupture or breakdown of such containers or systems.

DIVISIONS GROUPS

IEC publication 60079-10 uses Zones to define the guidelines for classifying hazardous areas. Zone 0 - Areas where explosive gas atmosphere is continuously present or present for long periods of time.

Zone 1 - Areas where explosive gas atmosphere is likely to occur in normal operation or can be expected to be present frequently.

Zone 2 - Areas where explosive gas atmosphere is not likely to occur and if it does, it will only be present for a short period of time.

Zone 20 - Areas in which a combustible dust, as a cloud, is present continuously or frequently during normal operations in sufficient quantities to produce an explosive mixture.

Zone 21 - Areas in which a combustible dust, as a cloud, is likely to occur during normal operations in sufficient quantities to produce an explosive mixture.

Zone 22 - Areas in which combustible dust, as a cloud, is not likely to occur, but may occur infrequently and persist for only short periods of time.

IEC ZONE CLASSIFICATIONS

FOR MORE INFORMATION - EMAIL: [email protected]

COMPARISON

HazardousMaterial

Gas orVapor

Dust

Fibers or Flyings

NEC U.S.Standards

Class I,Division 1

Class I,Division 2

Class II,Division 1

Class II,Division 2

Class III,Division 1

Class III,Division 2

IECStandards

Zone 0, 1

Zone 2

Zone 20

Zone 22

No Equivalent

No Equivalent

UL STANDARDS

Number Title

844 Lighting fixtures for use in hazardous areas

924 Emergency lighting and power equipment

1598 Lighting fixtures approved for ordinary locations

1598A Lighting approved for use on marine vessels. Salt water corrosive rated.

8750 LED safety

For complete Information, refer to the National Electric Code (NEC)

INGRESS PROTECTION (IP) CODES

™

®

First Number: Solid Objects Second Number: Liquids

1(833)-4REDSKYwww.redskylighting.com

0 No protection1 Objects greater than 50mm2 Objects greater than 12.5mm3 Objects greater than 2.5mm4 Objects greater than 1mm5 Dust protected6 Dust proof

0 No protection1 Vertically dripping2 Dripping up to 15°3 Limited spraying4 Splashing from all directions5 Hosing jets from all directions6 Strong hosing jets from all directions7 Temporary immersion8 Continuous immersion9K Steam-jet cleaningIP Codes referred to on the following page.

™

®

Corporate Office:410 Main St Racine, WI, 53403Phone: 1 (833) [email protected]

ENCLOSURE TYPES

20

22

55

24

55

66

66

52

67

68

54

54

54

Fixture Use

1

2

3

3R

4

4X

5

6

6P

7

8

9

10

12

13

Type

FOR HAZARDOUS LOCATION LED LIGHTING CALL (833) 4REDSKY

UL 844

UL 844

UL 844

UL 844

Manufacturing Facility:5301 21st St.Racine, WI, 53406Phone: 1 (844) 4HAZLOCwww.redskylighting.com

T - CODES

Maximum

Temperatures

°C °F

Temperature Class

(T-Code)

UL 844

Block Series

Linear Tuff Series

Round Series

Block-Mini series

Linear Series

Flood/High bay Linear Area Linear Area

FEATURED PRODUCTS

Certifications and RatingsBlock Series

Dimensions

Rated up to CID1, featuring 130 lumens per watt, three power options, and three available beam angles; the Block Series brings versatility, design excellence, and durability to hazardous location lighting. The Block Series is suitable when flammable gases, corrosive vapors, combustible dusts, and other hazards are present.

Specifications

Class I Division 1, Groups C,D Class I Division 2, Groups A,B,C,D

Class II Division 2, Groups F,GClass III

CSA C22.2 No. 137-M1981; 30-M1986CSA C22.2 No. 25-1966

CSA C22.2 No. 250.0-08; 250.13-14 UL 844 Hazardous Locations

UL 1598A Marine VesselsUL 1598 Wet Locations

UL 8750 LED Safety IP66

DLC (Contact Us)ABS (pending)

Voltage/Frequency

Power Factor

THD

Ambient Temperature

T-Code Rating

Warranty

Construction

Lens Material

Hardware

Finish

Connection

Color Rendering Index

L70

Available Beam Angles

Power

Lumen Output

Surge Protection

>99%

-40°F to 140°F (-40°C to 60°C)

Die-cast Aluminum

Tempered Glass

Marine Grade Stainless Steel

Thermoset Powdercoat

3/4” NPT

Ra>70

4KvA

<10%

>50,000 Hours

AC100-277V 50/60HZAC200-480V 50/60HZ

80W 100W 150W

9,855Lm 12,170Lm 18,715Lm

Class I Division 1 - T6Class I Division 2 - T4A Class II Division 2 - T4A

25° 60° 120°

R

in/mmUnits of Measure:

15kg / 33lbs

Weight

Red Sky Lighting LLC410 Main Street Racine, WI, 53403 USA

[email protected] (833) 4REDSKY

D13.5/3429.5/240

A7.6/193

B12.9/328

C

LEDs: 10 Years Driver: 7 Years

A

D

C

Pictured with yoke mounting option

Order Information

Accessories

YOKE: Yoke Mount STAN: Slip Fit Stanchion Mount Kit*SFCB: Safety Cable KitWG: Lens Wire guardSP1: 10KV Surge Protector

BLK-CS-11122019-V1.9

Block Series

BLK

Fixture

80

Wattage

80W100W150W

100-277

Voltage

100-277200-480

5000K

CCT

5000K4000K3000K**

120

Beam

120°

60°

25°

GREY

Color

Grey

PEND

Mounting

Pendant+

CLR

Lens

Clear

H1

Rating

H1-CID1H2-CID2

Photometrics



© 2019 Red Sky Lighting LLC All Rights Reserved

*Requires Yoke Mounting option

Pendant Mount

Yoke Mount with slip fit stanchion mount

**Special Order

Example: BLK-80-100-277-5000K-120-H1-CLR-GREY-PEND

+Pendant Mount standard, see above for other options

Class I Division 2, Groups A,B,C,D Class I Division 2, Groups A,B,C,D Class I Division 2, Groups A,B,C,D

Certifications and RatingsBlock-Mini Series H1

Dimensions

This Class I Division 1, superior designed, lightweight, compact, LED, area light is made for the most demanding environments and provides unmatched lighting performance with up to 200 lumens per watt. It is ideally suited for low mounting heights in offshore, gas, mining, particulate, chemical and other volatile environments.

Specifications

Class I Division 1, Groups B,C,D Class I Division 2, Groups A,B,C,D

Class II Division 1, Groups E,F,GClass III

CSA C22.2 No. 137-M1981; 25-1966CSA C22.2 No. 250.0-08; 250.13

UL 844 Hazardous LocationUL 1598A Marine Vessels

UL 1598 Wet Locations UL 8750 LED Safety

IP66 DLC (Contact Us)ABS (Contact Us)

™

®

Voltage/Frequency

Power Factor

THD

T-Code Ratings

Warranty

Construction

Lens Material

Hardware

Finish

Connection

IP / IK Rating


L70

Surge Protection

>95% @120V

Marine Grade Cast Aluminum

Tempered Glass

316 Stainless Steel


3/4” NPT w/ 3’ 18/3 Cord or Leads

IP66 / IK08

Ra>70

4KvA (Standard) 10 KvA (option)

<20%

>50,000 Hours

T6 (C1D1) T4A (C1D2) T6 (C2D1)




AC 120-277V 50/60Hz AC 347-480V 50/60Hz*

Power 21W 40W 50W* 60W

Type II, III, V

CCT

Beam Angles

2700K 4000K 5000K

Operating Temperature -40°F to 149°F (-40°C to 65°C)^

Lumen Output++ 4,220Lm 6,500Lm 7,180Lm 8,515Lm

Shown with Pendant Mount

*347-480v only available in 50W * 50W only avalable in 347-480v ^-40°C to 64°C for 60W option++Lumen output represents Type 5 distribution and tempered Glass lens. output will change dependent on options

13.9 lbs/ 6.3 kg

Weight

5.1

in/ 1

30

mm

9.7 in/ 244 mm

8.3

in/ 2

11

mm

Photometrics

Order Information Block-Mini Series

BLM-H1-CS-11122019-V1.1Red Sky Lighting LLC410 Main Street Racine, WI, 53403 USA



C0/180,112.5

C30/210,113.7

C60/240,112.9

C90/270,111.4

0

700

1400

2100

2800

3500

C0/180,134.6

C30/210,133.3

C60/240,98.3

C90/270,102.0

0

700

1400

2100

2800

3500

C0/180,102.1

C30/210,82.2

C60/240,73.0

C90/270,70.9

0

1000

2000

3000

4000

5000

Type II Type III Type V

5K-5000K4K-4000K3K-2700K**

T2-Type IIT3-Type IIIT5-110°

120-277 347-480*

Voltage

H1-CID1 CG - DG -

CORDLEAD

BLM

Fixture

5K

CCT

CORD

Wiring***

H1 CG PEND

Lens Mounting

T5

Beam

40

Wattage

120-277

YOKE - 304 Stainless Steel Yoke BracketSP1 - 10KvA Surge Protector for 120-277v***

SP2 - 10KvA Surge Protector for 347-480v***

Mounting Accessories

* 50W only with AC 347-480V **Special order ***Must be ordered with fixture +Pendant mount is standard * AC 347-480V only with 50W

Pendant Mount

Shown with yoke mount and diffused glass lens

Shown with Wire Guard Option

Rating

21W40W50W*60W

Pendant+ Clear glass Diffuse glass

Other Accessories

Wiring Requirements

WGG - Wire Guard for Glass lensSCFB - 316 Stainless Safety Cable

Example: BLM-40-120-277-5K-T5-H1-CLR-PEND-CORD

Contact Factory for Dimming Options

CORD - 3/4”npt with 3’ sjtow, 18/3 cord LEAD - 3’ leads

Linear Tuff Series

Dimensions

Bringing together energy efficiency, durability, and reliability, the Linear Tuff Series is designed to meet the most demanding harsh environments. Suitable for petrochemical facilities, drilling rigs, platforms, loading docks, mining, oil and gas refineries, tunnels, and other hazardous locations.

Specifications

Class I Division 1, Groups C,D Class I Division 2, Groups A,B,C,D

CSA C22.2 No. 250.0-08, 250.13-14 UL 844 Hazardous Location


UL 8750 LED Safety IP66

DLC (Contact Us)ABS (pending)

Voltage/Frequency

Power Factor

THD

Ambient Temperature

T-Code Ratings

Warranty

Construction

Lens Material

Hardware

Finish

Connection


L70

Beam Angle

Power

Lumen Output

Surge Protection

AC100-277V 50/60HZAC200-480V 50/60HZ

>95% @120V

-40°F to 122°F (-40°C to 50°C)

Marine Grade Extruded Aluminum Housing and Die-cast Driver Box

Tempered Glass



3/4” NPT

Ra>70

110°

4KvA

40W 80W

4,805Lm 9,825Lm

Certifications and Ratings

™

®

Class I Division 1 - T6Class I Division 2 - T4A

4.3/1084.3/108

B40W80W


Weight16.3lb/7.4kg 20.5lb/9.3kg

40W80W

>50,000 Hours

<20%; <10%


21.4/54445.3/1100

D

8.5/2158.5/215

A

Pictured with yoke mounting option

R

Red Sky Lighting LLC410 Main Street Racine, WI 53403 USA


D

C

BD

C 6.6/1686.6/168

Order Information

LNT 40 100-277 5000K CLR GREY PEND

Fixture Wattage Voltage CCT Lens Color Mounting

40W80W

100-277277-480

5000K4000K3000K*

ClearDiffuse

Grey YokePendant

Accessories

Linear Tuff Series

Photometrics




*Contact Us For availability **Must be ordered with yoke mount

Yoke Mount

Pendant Mount

Chain Mount

Pipe Clamp

YOKE: Yoke Mount Kit CHAIN: Stainless Steel Cable KitCLAMP: Pipe Clamp Kit** SFCB: Safety Cable KitSP1: 10kA Surge Protector UPCAP: Uplight limiting end caps

Linear Series

Dimensions

The Linear Series features a durable and ruggedized construction to endure environments where moisture, gases, dirt, corrosion, and vibration may be present. With it’s compact, low profile design, this fixture is perfect for low ceiling applications in walkways, overhangs, work and storage areas, and tunnels.

Specifications

Class I Division 2, Groups A,B,C,DClass II Division 1, Groups E,F,G

Class IIICSA C22.2 No. 137-M1981

CSA C22.2 No. 250.0-08, 250.13-14 UL 844 Hazardous Location


UL 8750 LED Safety DLC (Contact Us)

ABS (pending)IP66

Voltage/Frequency

Power Factor

THD

Ambient Temperature

Warranty

Construction

Lens Material

Hardware

Finish

Connection


L70

Beam Angle

Power

Lumen Output

Surge Protection

AC100-277V 50/60HZAC200-480V 50/60HZ

>95% @120V

-40°F to 122°F (-40°C to 50°C)

T3C

Polycarbonate



3/4” NPT

Ra>70

110°

4KvA

<20%; <10%

40W 80W

5,965Lm 11,140Lm


Pictured with yoke mounting


T-Code Rating

Marine Grade Extruded Aluminum Housing and Die-cast Driver Box

A

5.0/1275.0/127

B7.6/1927.6/192

40W80W


Weight11.0lb/5.0kg 15.2lb/6.9kg

40W80W

>50,000 Hours



23.7/60047.3/1200

C23.7/60047.3/1200

D6.6/1686.6/168

D

D

A

B

C

Order Information

LNR 40 100-277 5000K CLR GREY PEND

Fixture Wattage Voltage CCT Lens Color Mounting40W80W

100-277200-480

5000K4000K3000K**

ClearDiffuse

Grey PendantYoke

AccessoriesCHAIN: Chain Mounting Kit Yoke: Yoke Mount KitCLAMP: Pipe Clamp Kit*SFCB: Safety Cable KitSP1: 10kA Surge Protector

Linear Series

Photometrics



LNR-CS-11122019-V1.9 © 2019 Red Sky Lighting LLC All Rights Reserved

Yoke MountPendant Mount

Pipe Clamp Kit

Chain Mount

*Must be ordered with yoke mounting option **Contact Us

Example: LNR-40-100-277-5000K-CLR-GREY

Class I Division 2, Groups A,B,C,D Class I Division 2, Groups A,B,C,D Class I Division 2, Groups A,B,C,D

Certifications and RatingsBlock-Mini Series H2

Dimensions

This CID2 and CIID1 lightweight, compact, LED, area light packs a powerful punch by producing up to 200 lumens per watt and utilizing the industry favorite line of seven mounting options. It is ideally suited for low mounting heights in harsh and hazardous marine, power, and chemical environments.

Specifications

Class I Division 2, Groups A,B,C,D Class II Division 1, Groups E,F,G

Class III CSA C22.2 No. 137-M1981; 25-1966

CSA C22.2 No. 250.0-08; 250.13UL 844 Hazardous Location


UL 8750 LED SafetyIP66

DLC(Contact Us)

™

®

Voltage/Frequency

Power Factor

THD

T-Code Ratings

Warranty

Construction

Lens Material

Hardware

Finish

Connection

IP / IK Rating


L70

Surge Protection

>95% @120V

Marine Grade Cast Aluminum

Tempered Glass / Polycarbonate

316 Stainless Steel


3/4” NPT w/ 3’ 18/3 Cord or Leads

IP66 / IK08 (TG) IK10 (PC)

Ra>70

<20%

>50,000 Hours

T4A (C1D2) T6 (C2D1)




AC120-277V 50/60Hz AC347-480V 50/60Hz*

Power 21W 40W 50W* 60W

Type II, III, V

CCT

Beam Angles

2700K 4000K 5000K

Operating Temperature -40°F to 149°F (-40°C to 65°C)^

Lumen Output++ 4200Lm 6500Lm 7180Lm 8515Lm

Shown with Polycarbonate Lens, 25° Wall Mount, and Wire Guard Shown with Tempered Glass Lens and Pendant

Polycarbonate

9.7 in/ 246 mm

5.6

in/ 1

42

mm

8.3 in/ 210 mm

5.1

in/ 1

42

mm

Tempered Glass

9.7 in/ 246 mm 8.3 in/ 210 mm

13.9 lbs/ 6.3kg

Weight

10.6 lbs/ 4.8kg

*347-480v only available in 50W *50W only available in 347-480v ^-40°C to 64°C for 60W option++Lumen output shown with Type 5 distribution and tempered Glass lens, output will change dependent on options

4KvA (Standard) 10 KvA (option)

Weight

Photometrics

Order Information Block-Mini Series

BLM-H2-CS-11122019-V1.1Red Sky Lighting LLC410 Main Street Racine, WI, 53403 USA



C0/180,112.5

C30/210,113.7

C60/240,112.9

C90/270,111.4

0

700

1400

2100

2800

3500

C0/180,134.6

C30/210,133.3

C60/240,98.3

C90/270,102.0

0

700

1400

2100

2800

3500

C0/180,102.1

C30/210,82.2

C60/240,73.0

C90/270,70.9

0

1000

2000

3000

4000

5000

Type II Type III Type V

21W40W50W*60W

5K - 5000K4K - 4000K3K - 2700K**

CCTT2 - Type IIT3 - Type IIIT5 - 110°

PEND - 3/4” NPT Pendant+

YOKE - 304 Stainless Yoke BracketCEIL - Junction Box 3/4” NPT++

SN25 - Stanchion 25° - 1.5” NPT++

SN90 - Stanchion 90° - 1.5” NPT++

WL25 - Wall Mount 25° - 3/4” NPT++

WL90 - Wall Mount 90° - 3/4” NPT++

Mounting Options

120-277347-480*

H2 - CID2 Clear Glass Diffuse GlassDiffuse Poly- carbonate

CORD - 3’ SJTOW 18/3 CordLEAD - 3’ Leads0-10V Dimming standard on all options

Wiring***

BLM

Fixture

5K CORD

Wiring***

H2 CG PEND

Rating Lens Mounting

T5

Beam

21

Wattage

120-277

Voltage

ADPT - Mounting Adaptor for CEIL, SN25, SN90, WL25, & WL90++

WGG - Wire Guard for Glass lensWGP - Wire Guard for Polycarbonate LensSP1 - 10KvA Surge Protector for 120-277v***SP2 - 10KvA Surge Protector for 347-480v***SCFB - 316 Stainless Safety Cable

Mounting Accessories

SN25 SN90

YOKE

WL90

CEILPEND

Example: BLM-21-120-277-5K-T5-H2-CG-PEND-CORD

CG-

DG-

DP-

CORD LEAD

PEND+ YOKE CEIL SN25 SN90 WL25 WL90

*50W only with AC347-480V*AC347-480V only with 50W

**Special Order ***Must be ordered with fixture +Pendant mount is standard

Mounting adaptor (ADPT) will be supplied with all mounting accessories except pendant and yoke

++

WL25

0-10V Dimming standard on all options

Dimming

Certifications and RatingsRound Series

Dimensions

A compact, lightweight LED fixture that packs a powerful punch. This industry favorite has seven mounting options and produces 150 lumens per watt. Best utilized in harsh and hazardous environments for marine, power, and chemical industries.

Specifications

Class I Division 2, Groups A,B,C,D Class II Division 1, Groups E,F,G

Class II Division 2, Groups F,GClass III Division 1

CSA C22.2 No. 137-M1981; 25-1966CSA C22.2 No. 250.0-08; 250.13

UL 844 Hazardous LocationUL 1598A Marine Vessels

UL 1598 Wet Locations UL 8750 LED Safety

IP66DLC (Contact Us)

ABS (pending)

™

®

R

Voltage/Frequency

Power Factor

THD

Ambient Temperature

T-Code Ratings

Warranty

Construction

Lens Material

Hardware

Finish

Connection


L70

Beam Angle

Power

Lumen Output

Surge Protection

>95% @120V

-40oF to 131oF (-40oC to 55oC)

Die-cast Aluminum

Tempered Glass



3/4” NPT

Ra>70

110o

4KvA

<20%

>50,000 Hours

AC200-480V 50/60HZ*AC100-277V 50/60HZ

40W* ; 45W 60W* ; 65W

6,760Lm 10,030Lm

Class I Division 2 - T4AClass II Division 1 - T5Class II Division 2 - T5


Weight

8.8lb / 4.0kg

Units of Measure: in/mm

A 10.3/262 6.1/155

B



Pictured with 25o Stanchion Mount

A

B

Photometrics

Order Information

RND

Fixture

45

Wattage45W65W40W*

60W*

100-277

Voltage100-277200-480*

5000K

CCT5000K4000K

CLR

LensClear

DiffuseGlobe

GREY

ColorGrey

PEND

MountingPendantYokeCeilingStan25Stan90Wall25Wall90

Round Series

Accessories

SFCB: Safety Cable KitWG: Flat Lens Wire GuardWGG: Globe Lens Wire guardSP1: 10kA Surge Protector

RND-CS-11122019-V1.94




*480V only available in 40W and 60W*40W and 60W only available in 480V

Pendant with Globe Lens

Yoke Mount with Globe Lens

Pendant

Stanchion 90 Stanchion 25

Wall 90 Wall 25

CeilingYoke

EXAMPLE: RND-45-100-277-5000K-CLR-GREY-PEND

Certifications and RatingsModular Series

Types

The Modular Series’ design features marine grade aluminum, polymers, and a rugged construction. Great for indoor, outdoor, commercial, harsh locations, and industrial applications. The expansive lumen range and multiple beam patterns makes it perfect for high bay, low bay, floodlighting, and general area lighting.

Specifications

UL 1598 Wet LocationsUL 8750 LED Safety

DLCIP67 Driver Enclosure

IP68 LED Modules

Voltage/Frequency

Power Factor

THD

Operating Temperature

Warranty

Construction

Lens Material

Hardware

Finish

Connection


L70

Beam Angle

Power

Lumen Output

Surge Protection

>95% @ 230V

-40°F to 122°F (-40°C to 50°C)


Marine Grade Extruded Anodized Aluminum

Polycarbonate



18” cord

Ra>75

250, 60o, 90o, 120o*

4KvA

<20%

>50,000 Hours

AC100-277V 50/60HZAC200-480V 50/60HZ*

50W/100W/150W/200W/300W/400W

6000Lm ~ 48000Lm

50W 100W/150W

200W 300W

400W

6000Lm 12000Lm/18000Lm

24000Lm 36000Lm

48000Lm

R


[email protected](833)-4REDSKY

*200-480v not available for the 50W and 100W**50W and 100W only available in 60o and 90o BEAM ANGLES

Dimensions

Order Information

MOD

Fixture

50

Wattage

50 W** 100 W**

150 W200 W300 W400 W

120-277

Voltage

120-277200-480*

5700K

CCT

5700K4000K3000K+

120

Beam Angle

120906025

**

**

ACCESSORIES

Chain: Eyebolt KitSFCB: Safety Cable KitJBOX: IP66 Wiring Junction Box

300W420mm16.5in

200W340mm13.4in

100/150W260mm10.2in

50W200mm7.9in

356

mm/1

4.1

in

400W580mm22.8in

356

mm/1

4.1

inModular Series



MOD-CS-11122019-V1.91 © 2019 Red Sky Lighting LLC All Rights Reserved

*200-480v not available for the 50W and 100W**50W and 100W only available in 60o and 90o

** 60o and 90o only available in 50W and 100W

+Special order

Example: MOD-50-120-277-5700K-120

Order Information High Bay Hot Series

Options

Accessories

ALR: Aluminum ReflectorTWIN: Dual Fixture mounting hardware

**Requires aluminum reflector accessory

Photometrics

HBH 150 100-277 5000K 110

Fixture Wattage Voltage CCT beam angle

100-2774000K5000K 110°

60°**150W

x2 150W fixtures shown withTwin Mount Kit and Aluminum Reflectors




347-480

Example:HBH-150-100-277-5000K-110

™

®

R


Dimensions Specifications

DLK2 Industrial Conveyor


15.5/393

A

5.9kg / 13lbs

Weight

14.6/371

B6.7/169

C

A

B

C

Voltage/Frequency

Construction LM6 Aluminum Body Polycarbonate Cover

Lens Material Polycarbonate

Type 1 Type 3 Symmetrical

Hardware Marine Grade Stainless Steel

Connection M20x1.5 SS316 Cable Gland

Cool White: 5800-6900KWarm White: 2700-3000K Amber: 1800K

90-305VAC 47-63HZ127-431VDC 47-63HZ

Low Voltage: 23-27VDC

Power 62W

Operating Temperature -22°F to 122°F (-30°C to 50°C)

Lumen Output

Efficacy

6,400Lm

103Lm/W

Warranty Standard: 3 Years; Extended: 5 Years

L70

CRI

>50,000 Hours

>70 excluding Amber

CCT

Available Optics

UL 1598 Wet LocationUL 8750 LED Safety

CSA C22.2 No. 250.0-08CSA C22.2 No. 250.13-14

IP66IK09

DLK2 is designed to provide the most energy efficient way of illuminating industrial conveyors and walkways. The power consumption of less than 62W converts into a mere 1.5W per foot of conveyor line. The robust uni-body design is both lightweight and versatile with the flexibility to fit many industry standard spigot mount installations.

R

Power Factor >0.95 / AC230V



Order Information

Accessories

DSKY: Dark Sky Compliant Shield*

*Available with WWT LED option only

DLK2

Fixture

60

Wattage

60W

90-305

Voltage

90-305127-431

ELV 23-27

CWT

CCT

CWTWWTAMB

BW1

Optics

BW1 - Batwing Type 1BW3 - Batwing Type 3SY1 - Symmetrical

Photometrics

90

60

90

60

30 300

BW1 Batwing (Type 1 Optics)

cd/klm C0 ~ C180 C90 ~ C270

90

60

90

60

30 300

BW3 Batwing (Type 3 Optics)

cd/klm C0 ~ C180 C90 ~ C270

90

60

90

60

30 300cd/klm C0 ~ C180 C90 ~ C270

SY1

DLK2 Industrial Conveyor



DLK2-CS-11122019-V1.3 © 2019 Red Sky Lighting LLC All Rights Reserved

Shown with Dark Sky Compliant Shield*

Example: DLK2-60-90-305-CWT-BW1


Dimensions Specifications

CP22-Superbeam

4.5kg / 9.9lbs

Weight

Marine / Wet LocationIP66IK09

the CP22-Superbeam is built for the harshest environments and to endure continuous exposure to vibration and elements. Originally designed for use on railways, this marine grade navigation light is an ideal luminaire for long distance, narrow beam angle illumination with a peak intensity of >200,000 Candella.

Voltage/Frequency

Construction LM6 Aluminum Body Toughened Glass Lens

Optic Material PMMA

Narrow

Hardware Marine Grade Stainless Steel

Connection UL2095, 16 AWG x 2C Braid PVC

5900-6500K

DC12-30VAC100-277V or 200-480V*

Power 60W

Operating Temperature -22°F to 122°F (-20°C to +50°C)

Peak Intensity 214,200 Cd

Warranty Standard: 3 Years; Extended: 5 Years

L70

CRI

>50,000 Hours

>70

CCT

Available Optics



232mm

108mm265mm

211mm

213mm

Ø12mm

226mm

108mm

160mm

50mm 50mm

Mounting Bracket Dimensions

*Contact us for more information

Lumen Output 4,623 Lm

Order Information

Photometrics

CP22-Superbeam



CP22-CS-11122019-V1.4 © 2019 Red Sky Lighting LLC All Rights Reserved

CP22

Fixture

60

Wattage

60W

12-30

Voltage*

12-30Vdc

MPB

Mounting

MPB - Mobile BracketFPB - Fixed Bracket

24VDC INWhite (Positive)Black (Negativ e)

Steel WireBraide d Cable

+ –

ELVExtra Low Voltage

*Contact us for remote power supply information 100-277V or 200-480V

Example: CP22-60-12-30-MPB

red sky e-brochure nov2019€¦ · 11/12/2019 · &/$03 3lsh &odps .lw 6)&% 6dihw\...

Documents