register today: 866.906.9190 | uta.edu/ded/osha | osha@uta ... hs... · n osha #3115 fall...

• NEW! OSHA #3085 Principles of Scaffolding - p. 21

• WANT TO KNOW MORE ABOUT OSHA’S NEW SILICA STANDARD? SH 210 OSHA’s New Silica Standard - p. 27 CPT 106 Silica for the Competent Person - p. 25

• OHST/ASP/CSP PREPARATION WORKSHOPS Review the fundamentals on topics required to prepare for your OHST, ASP, or CSP exam - p. 33

SAFETY & HEALTH TRAININGRegister Today: 866.906.9190 | uta.edu/ded/osha | [email protected]

AUG 2017 - SEP 2018

https://web-ded.uta.edu/wconnect/CourseStatus.awp?&Course=pdogsahome

uta.edu/ded/osha

uta.edu/ded/osha

mailto:osha%40uta.edu?subject=

uta.edu/ded/osha

uta.edu/ded

THE UNIVERSITY OF TEXAS AT ARLINGTON ADVANTAGEExcellence and achievement abound at The University of Texas at Arlington. Our highly ranked academic programs attract the best and brightest scholars from around the world, and our faculty and participants consistently receive national and international recognition for their accomplishments. The breadth and depth of these accolades accentuate UTA’s status as a preeminent place for intellectual pursuits and a driver of positive change. Our training is highly regarded by employers and industries.

As an OSHA Education Center, UTA is expanding its delivery of safety and health courses, offering new locations, online courses, and on-site training. Our courses are taught by industry experts with real-world insight and extensive technical and OSHA knowledge.

We will customize our training for your organization. No matter the delivery method, course attendees can earn continuing education units (CEUs) and apply them to our professional certificates.

Attend Courses at Multiple Locations Our numerous training sites throughout Region VI offer flexible and convenient access to our knowledgeable and experienced instructors. Contract classes are also available.

November 28 - 29, 2017Houston, Texas 866.906.9190oilandgasconference.org

REGISTER NOW!

uta.edu/ded

oilandgasconference.org

uta.edu/ded

866-906-9190 | uta.edu/ded 3

TABLE OF CONTENTS

FeaturesLabor Rights Week 2017 ................................................................. 3

Outreach Training Program ........................................................... 14

UTA Authorized Trainer Program ................................................... 15

Online Training .............................................................................. 30

Evening Classes ............................................................................. 46

Saturday Classes ............................................................................ 46

Registration Information ................................................................ 47

Certificate and Certification Programs

Fire 1500 Certifications .......................................... 4

Certified Life Safety Specialist ............................... 4

Specialist in Safety & Health .................................. 5

Certified Safety & Health Official ......................... 6

Safety, Health & Environmental Professional ....... 6

Master Certification ............................................... 7

Public Sector S&H Fundamentals .................. 7

Accident Investigation ......................................... 35

Ask Us About Contract Training! Do you have several employees who need training or don’t see a course offering that meets their schedule? Every course and professional certification offered in this catalog can be delivered straight to you, at your facility, and on your schedule – with no employee travel expenses. Unless otherwise indicated, contract pricing throughout this publication reflects a class size of up to 20 participants and includes all instructor fees and course materials. Custom contract classes of 20 or more participants and/or customized curriculum are also available. Contact our office at 866.906.9190 to learn more.

Discount pricing and streamlined purchasing procedures for open enrollment and custom contract training is now available to federal government customers through UTA’s GSA

schedule 899 Environmental Services contract. Visit our website at uta.edu/ded for more information or call us at 866.906.9190.

Every year during Labor Rights Week, federal agencies as well as educational, labor, and community organizations join together to remind the nation’s most vulnerable workers that everyone who works in the United States has the same workplace rights:• A safe and healthy workplace free of obvious hazards• Fair wages — including overtime pay and the federal

minimum wage• The right to report unsafe conditions or unfair wages to your

employer • The ability to contact OSHA, The Wage and Hour Division,

or the Equal Employment Opportunity Commission if your rights have been violated

Beginning on Monday, August 28th and again on September 1st, 8th, and 11th, in recognition of Labor Rights, The University of Texas at Arlington OSHA Education Center will offer a series of free OSHA short courses. See page 22 for a complete list of OSHA short courses being offered.

LABOR RIGHTS WEEK

PUBLIC SECTOR

Certificate Programs

Safety & Health Fundamentals

™

Course SchedulesSchedule by Course ................................................................... 8-38

Schedule by Location ............................................................... 39-46

Course Descriptions/Schedules by CourseOutreach Trainer Update Courses ............................................ 12-13

OSHA Maritime/Disaster Site Courses .......................................... 16

Other OSHA Courses ............................................................... 17-21

OSHA Short Courses ................................................................ 23-24

Life Safety Courses ........................................................................ 28

Fire & Safety Courses .................................................................... 28

Hazardous Materials Courses .................................................. 29, 31

Safety & Health Management Courses .................................... 32-34

CSP/ASP/OHST Preparation Workshops ....................................... 34

Risk Management Courses ............................................................ 35

Environmental Courses ............................................................. 36-38

http://uta.edu/ded/osha

uta.edu/ded

https://web-ded.uta.edu/wconnect/CourseStatus.awp?&Course=pdogsahome

4 University of Texas at Arlington | OSHA Education Center

CERTIFICATION PLANNING GUIDE

Accident Investigation Certificate...Page 35

CERTIFIED LIFE SAFETY SPECIALIST

REQUIRED (3)n FS 710 Blueprint Reading for the Fire Servicen LS 101 Life Safety Code Conceptn OSHA #511 OSHA Standards for General Industry or OSHA #510 OSHA Standards for the Construction Industry

ELECTIVES (3)n FS 1000 Building Construction for the Fire Servicen FS 860 Applied Fire/Safety Protection & Emergency Analysisn SH 200 OSHA/Joint Commission Healthcare Safety Overview & Crosswalkn LS 102 Life Safety for Assembly and Educationn LS 103 Life Safety for Day Care and Residentialn LS 104 Life Safety for Ambulatory and Health Caren LS 105 Life Safety for Correctional Facilitiesn LS 106 Life Safety for Apartments and 1 & 2 Family Homesn LS 107 Life Safety for Mercantile and Businessn LS 108 Life Safety for Industrial and Storagen LS 109 Life Safety for Rehabilitation of Historic Propertiesn OSHA #7105 Evacuation and Emergency Planningn WST 405 Above-Ground Storage Tank/Underground Storage Tank

CLSSCLSSCERTIFIED

LIFE SAFETYSPECIALIST In this program you will learn

the concept, structure, and technical knowledge necessary to apply the NFPA Life Safety Code to everyday issues affecting the fire service, industry, and your community.

FIRE 1500 CERTIFICATES

Learn how to effectively implement NFPA 1500 to improve the health and safety of your firefighters and the overall performance of your department. Find out more at Fire1500.com.

SAFETY & HEALTH OPERATIONSREQUIRED (4)

nFS 1500 Fire Safety & Health Managementn RM 105 Fire Risk ManagementnFS 201 Applied Fire Safety, Protection & Analysisn NFFF Everyone Goes Home: 16 Life Safety Initiatives

SAFETY & HEALTH TECHNICIANREQUIRED (2)

Meet the requirements for the FSHO.n FS 1510 Advanced Fire 1500 Safety and Health Management ConceptsnRM 101 Safety, Health, & Environmental Risk Management (SHERM) PrinciplesELECTIVES (3)nOSHA #2225 Respiratory ProtectionnOSHA #7115 Lockout/Tagoutn OSHA #7205 Health Hazard AwarenessnOSHA #7500 Intro to Safety and Health Managementn OSHA #7505 Intro to Incident (Accident) InvestigationnSH 7201 Bloodborne Pathogen Trainer CoursenHM 242 HAZWOPER Annual RefreshernDOT 101 Hazardous Materials Transportation Awareness

NFA COURSES (one of the following may be applied as an elective)n Q0494 National Fire Incident Reporting System (NIFRS) 5.0n Q0381 Empowering Responder Wellness

SAFETY & HEALTH SPECIALISTREQUIRED (2)

Meet the requirements for the FSHT.nFS 910 Traffic Incident Management (TIM) Responder TrainingnOSHA #511 OSHA Standards for General Industry

ELECTIVES (3)nOSHA #521 OSHA Guide to Industrial HygienenOSHA #2264 Permit-Required Confined Space Entryn OSHA #3015 Excavation, Trenching, and Soil Mechanicsn OSHA #3115 Fall Protectionn SH 925 Management of Change

NFA COURSES (one of the following may be applied as an elective)nR0506 Executive PlanningnQ0138 Fire Service Supervision

FSHOFIRE 1500

SAFETY & HEALTH OPERATIONS

FSHSFIRE 1500

SAFETY & HEALTHSPECIALIST

FSHTFIRE 1500

SAFETY & HEALTH TECHNICIAN

https://web-ded.uta.edu/wconnect/CourseStatus.awp?&course=fireclss

https://web-ded.uta.edu/wconnect/CourseStatus.awp?&Course=firehome

866-906-9190 | uta.edu/ded 5

CERTIFICATION PLANNING GUIDESPECIALIST IN SAFETY & HEALTHEarn your SSH in general or construction industry, fire safety, risk management, oil & gas, disaster response, port safety or healthcare by completing the required courses and electives.

GENERAL INDUSTRYREQUIRED (1)nOSHA #511 OSHA Standards for General IndustryELECTIVES (3)nOSHA #521 OSHA Guide to Industrial HygienenOSHA #2015 Hazardous MaterialsnOSHA #2045 Machinery and Machine Guarding StandardsnOSHA #2225 Respiratory ProtectionnOSHA #2255 Principles of ErgonomicsnOSHA #2264 Permit-Required Confined Space EntrynOSHA #3095 Electrical StandardsnOSHA #3115 Fall Protection

CONSTRUCTION INDUSTRYREQUIRED (1)nOSHA #510 OSHA Standards for the Construction IndustryELECTIVES (3)nOSHA #2015 Hazardous Materials nOSHA #2055 Cranes in Construction1

nOSHA #2225 Respiratory ProtectionnOSHA #2264 Permit-Required Confined Space EntrynOSHA #3015 Excavation, Trenching, and Soil Mechanics nOSHA #3085 Principles for ScaffoldingnOSHA #3095 Electrical StandardsnOSHA #3115 Fall ProtectionnSH 300 Safety Standards for ScaffoldingPORT SAFETYREQUIRED (2)nOSHA #2055 Cranes in Construction1

nOSHA #5410 OSHA Standards for the Maritime Industry

ELECTIVES (2)nAny two (2) OSHA courses2

OIL & GASREQUIRED (2)nOSHA #5810 Hazard Recognition for On-Shore Oil and Gas Exploration and ProductionnOG 200 Trainer Course in H2S (Hydrogen Sulfide)ELECTIVES (2)nAny two (2) OSHA courses2

1 Completion of SH 340 meets SSH requirements.2 Excluding Outreach Trainer courses and OSHA short courses.

FIRE SAFETY REQUIRED (2)nOSHA #511 OSHA Standards for General Industry or OSHA #510 OSHA Standards for the Construction IndustrynLS 101 Life Safety Code Concept or FS 1500 Fire Safety & Health ManagementELECTIVES (2)nOSHA #2015 Hazardous MaterialsnOSHA #2225 Respiratory ProtectionnOSHA #2264 Permit-Required Confined Space EntrynOSHA #3015 Excavation, Trenching, and Soil MechanicsnOSHA #3115 Fall ProtectionnOSHA #5600 Disaster Site Worker Trainer CoursenMM 722 Chemistry for the Environmental Professional nFS 860 Applied Fire/Safety Protection & Emergency AnalysisnFS 913 Fire Service Trainer Course for Hazard Communication Global Harmonization (GHS)nSH 7201 Bloodborne Pathogen Trainer Course

DISASTER RESPONSEREQUIRED (2)nDR 660 Incident Management TrainingnOSHA #511 OSHA Standards for General Industry or OSHA #510 OSHA Standards for the Construction IndustryELECTIVES (2)nAny one (1) OSHA course1

nHM 241 HAZWOPER General Site Worker 40-Hour or HM 245 HAZWOPER First Responder Operations Level

HEALTHCAREREQUIRED (3)nSH 200 OSHA/Joint Commission Healthcare Safety Overview & CrosswalknSH 201 Trainer Course for Healthcare Employee Safety and HealthnOSHA #511 OSHA Standards for General IndustryELECTIVES (2)nAny two (2) OSHA courses1

RISK MANAGEMENTREQUIRED (2)nOSHA #511 OSHA Standards for General Industry or OSHA #510 OSHA Standards for the Construction IndustrynRM 101 Safety, Health, and Environmental Risk Management (SHERM) PrinciplesELECTIVES (2)nRM 201 Assessment TechniquesnRM 202 Performance Measurement & Data AnalysisnRM 203 Risk-Informed Decision Making

1 Excluding Outreach Trainer courses and OSHA short courses.


https://web-ded.uta.edu/wconnect/CourseStatus.awp?&course=oshassh


CERTIFICATION PLANNING GUIDECERTIFIED SAFETY & HEALTH OFFICIAL

GENERAL INDUSTRY REQUIRED (6)n OSHA #501 Trainer Course in OSHA Standards for General Industry1

n OSHA #510 OSHA Standards for the Construction Industry2

n OSHA #521 OSHA Guide to Industrial Hygiene n OSHA #2045 Machinery and Machine Guarding Standards n OSHA #2264 Permit-Required Confined Space Entry n OSHA #3095 Electrical Standards ELECTIVES (2)n OSHA #2015 Hazardous Materials n OSHA #2225 Respiratory Protection n OSHA #2255 Principles of Ergonomics n OSHA #3115 Fall Protection n OSHA #5410 OSHA Standards for the Maritime Industry n OSHA #5810 Hazard Recognition for On-Shore Oil and Gas Exploration and Production

CONSTRUCTION INDUSTRY REQUIRED (6)n OSHA #500 Trainer Course in OSHA Standards for the Construction Industry2 n OSHA #511 OSHA Standards for General Industry3

n OSHA #521 OSHA Guide to Industrial Hygiene n OSHA #3015 Excavation, Trenching, and Soil Mechanics n OSHA #3095 Electrical Standards n OSHA #3115 Fall Protection ELECTIVES (2)n OSHA #2015 Hazardous Materials n OSHA #2045 Machinery and Machine Guarding Standards n OSHA #2055 Cranes in Construction4

n OSHA #2225 Respiratory Protection n OSHA #2255 Principles of Ergonomics n OSHA #2264 Permit-Required Confined Space Entry

Note: Two (2) OSHA short courses may be counted as one (1) elective towards your CSHO.

1 Course has prerequisite requirements. 2 Completion of OSHA #500 or #502 meets requirements.3 Completion of OSHA #501 or #503 meets requirements.4 Completion of SH 340 meets CSHO requirements.

Earn your CSHO by completing six (6) required courses and two (2) electives in general industry or construction.

SAFETY, HEALTH & ENVIRONMENTAL PROFESSIONAL

REQUIREDn ETI 101 Intro to Environmental Compliancen RM 101 Safety, Health, and Environmental Risk Management (SHERM) Principlesn Choose one (1) Certified Safety & Health Official (CSHO) Certification Requires one (1) environmental elective

OSHA #500 Trainer Course in OSHA Standards for the Construction Industry Requires five (5) electives

OSHA #501 Trainer Course in OSHA Standards for General Industry Requires five (5) electives SAFETY AND HEALTH ELECTIVES (4) *Not required with your CSHO.

n OSHA #521 OSHA Guide to Industrial Hygiene n OSHA #2015 Hazardous Materials n OSHA #2045 Machinery and Machine Guarding Standards n OSHA #2055 Cranes in Construction1

n OSHA #2225 Respiratory Protection n OSHA #2255 Principles of Ergonomics n OSHA #2264 Permit-Required Confined Space Entry n OSHA #3015 Excavation, Trenching, and Soil Mechanics n OSHA #3095 Electrical Standards n OSHA #3115 Fall Protection n OSHA #5810 Hazards Recognition for Oil and Gas n SH 300 Safety Standards for Scaffolding n SH 810 Written Program for Safety and Health Management ENVIRONMENTAL ELECTIVES (1)n AIR 201 Fundamentals of the Clean Air Act n ETI 501 EPA Outreach Trainer Course n MGE 801 Environmental Management Systemsn MGE 802 Pollution Prevention and Lean Principlesn MGE 810 Environmental Audits n MGE 811 Environmental Law n WTR 301 Water and Wastewater Regulations n WST 401 Resource Conservation and Recovery Act

1 Completion of SH 340 meets SHEP requirements.

Earn your SHEP by completing course work in Safety and Health, Environmental, and Risk Management. Completion of your SHEP Certification fulfills the prerequisite requirement for the Master Certifications in Safety & Health and Risk Management.

SAFETY, HEALTH &ENVIRONMENTAL

PROFESSIONAL

SHEPSHEP

https://web-ded.uta.edu/wconnect/CourseStatus.awp?&course=oshacsho

https://web-ded.uta.edu/wconnect/CourseStatus.awp?&course=oshashep

866-906-9190 | uta.edu/ded 7

CERTIFICATION PLANNING GUIDEMASTER CERTIFICATION

SAFETY & HEALTH REQUIRED (2)

n SHEP Certification

n MS 901 Management System Design for EHS ELECTIVES (3)

Three (3) advanced Safety & Health courses with MC shield

n ___________________________________________n ___________________________________________n ___________________________________________

ENVIRONMENTAL REQUIRED

n MS 901 Management System Design for EHS n Environmental Regulatory Professional (ERP) Certification or Environmental Science Professional (ESP) Certification or Environmental Management Professional (EMP) Certification

ELECTIVES (3)

Three (3) additional Environmental Courses

n ___________________________________________n ___________________________________________n ___________________________________________

RISK MANAGEMENT REQUIRED (2)

n SHEP Certification

n MS 901 Management System Design for EHS ELECTIVES (3)

Three (3) advanced Risk Management courses with MC shield

n ___________________________________________n ___________________________________________n ___________________________________________

In order to receive your certificate, download a Certificate Request Form

from uta.edu/ded.

Earn your Master Certification in Safety & Health, Environmental, or Risk Management.

GENERAL INDUSTRY

CONSTRUCTION INDUSTRY

REQUIRED (3) nOSHA #511 OSHA Standards for General Industryn OSHA #7500 Intro to Safety and Health Managementn OSHA #7505 Intro to Incident (Accident) Investigation

ELECTIVES (4) [minimum of 29 contact hours] nOSHA #521 OSHA Guide to Industrial Hygiene nOSHA #2255 Principles of Ergonomics nOSHA #3095 Electrical Standards n OSHA #2264 Permit-Required Confined Space Entry or OSHA #7300 Understanding OSHA’s Permit-Required Confined Space Standard n OSHA #7000 OSHA Training Guidelines for Safe Patient Handling n OSHA #7005 Public Warehousing and Storage n OSHA #2045 Machinery and Machine Guarding Standards or OSHA #7100 Intro to Machinery and Machine Safeguarding n OSHA #7105 Evacuation and Emergency Planning n OSHA #7115 Lockout/Tagout n OSHA #7200 Bloodborne Pathogens Exposure Control for Healthcare Facilities n OSHA #7205 Health Hazard Awareness n OSHA #7210 Pandemic Influenza Preparedness n OSHA #7845 Recordkeeping Rule Seminar

PUBLIC SECTOR

Certificate Programs

Safety & Health Fundamentals

™

REQUIRED (3)n OSHA #510 OSHA Standards for the Construction Industry n OSHA #7500 Intro to Safety and Health Management n OSHA #7505 Intro to Incident (Accident) Investigation

ELECTIVES (4) [minimum of 29 contact hours] nOSHA #521 OSHA Guide to Industrial Hygiene nOSHA #2255 Principles of Ergonomics nOSHA #2264 Permit-Required Confined Space Entry nOSHA #3015 Excavation, Trenching, and Soil Mechanics or OSHA #7410 Managing Excavation Hazards n OSHA #3095 Electrical Standards n OSHA #3115 Fall Protection or OSHA #7405 Fall Hazard Awareness for the Construction Industry n OSHA #7105 Evacuation and Emergency Planning n OSHA #7110 Safe Bolting: Principles and Practices n OSHA #7205 Health Hazard Awareness n OSHA #7400 Noise Hazards in the Construction Industry n OSHA #7845 Recordkeeping Rule Seminar


https://web-ded.uta.edu/wconnect/CourseStatus.awp?&course=oshamc

8 University of Texas at Arlington | OSHA Education Center w Evening Classes p Saturday Classes z Clases en español

CONSTRUCTION OSHA COURSES

OSHA #510 OSHA Standards for the Construction Industry30 Hours | $595 Contract | $8,000This course covers the OSHA Standards, policies, and procedures in the construction industry. Topics include scope and application of the OSHA Construction Standards, construction safety and health principles with special emphasis on the most hazardous areas in construction. Upon course completion, participants will be able to define construction terms found in the OSHA Construction Standards; identify hazards in the construction industry; locate and determine the appropriate OSHA Construction Standards, policies, and procedures; and describe the use of the OSHA Construction Standards and regulations to supplement an ongoing workplace safety and health program.

This course satisfies the training prerequisite for the ATP 191 designation in Personal Protective Equipment.

Aug 14 - 17, 2017 Houston, TX

Aug 15 - 18, 2017 Tulsa, OK

Aug 22 - 25, 2017 Amarillo-Dumas, TX

Aug 22 - 25, 2017 Mesquite, TX

Sep 5 - 8, 2017 La Porte, TX

Sep 12 - 15, 2017 Oklahoma City, OK

Sep 18 - 21, 2017 Houston, TX

Sep 19 - 22, 2017 Arlington, TX

wSep 25 - Oct 18, 2017 Arlington, TX

Sep 26 - 29, 2017 Port Lavaca, TX

Sep 26 - 29, 2017 San Antonio, TX

Oct 3 - 6, 2017 Baton Rouge, LA

Oct 3 - 6, 2017 El Paso, TX

Oct 9 - 12, 2017 Houston, TX

Oct 10 - 13, 2017 Shreveport, LA

Oct 17 - 20, 2017 Arlington, TX

Oct 24 - 27, 2017 Corpus Christi, TX


pOct 30 - Nov 9, 2017 Houston, TX

Oct 31 - Nov 3, 2017 Albuquerque, NM

Nov 7 - 10, 2017 Arlington, TX

Nov 13 - 16, 2017 Houston, TX

Nov 14 - 17, 2017 West Memphis, AR

Nov 28 - Dec 1, 2017 Arlington, TX

Dec 5 - 8, 2017 Arlington, TX

Dec 5 - 8, 2017 Austin, TX

Dec 5 - 8, 2017 Oklahoma City, OK

Dec 11 - 14, 2017 Houston, TX

Dec 19 - 22, 2017 Corpus Christi, TX

Dec 19 - 22, 2017 Dallas, TX

Jan 8 - 11, 2018 Houston, TX

Jan 15 - 18, 2018 Bentonville, AR

Jan 16 - 19, 2018 Arlington, TX

Jan 29 - Feb 1, 2018 Houston, TX

Feb 6 - 9, 2018 Arlington, TX

Feb 13 - 16, 2018 San Antonio, TX

Feb 20 - 23, 2018 Hot Springs, AR

Feb 20 - 23, 2018 New Orleans, LA

Feb 20 - Apr 23, 2018 Tulsa, OK

Feb 26 - Mar 1, 2018 Houston, TX

Feb 27 - Mar 2, 2018 Arlington, TX

Mar 20 - 23, 2018 Albuquerque, NM

Mar 20 - 23, 2018 Arlington, TX

Mar 26 - 29, 2018 Houston, TX

Apr 3 - 6, 2018 Monroe, LA

Apr 10 - 13, 2018 Arlington, TX

Apr 10 - 13, 2018 Port Lavaca, TX

Apr 23 - 26, 2018 Houston, TX

May 1 - 4, 2018 Dallas, TX

May 1 - 4, 2018 El Paso, TX

May 8 - 11, 2018 Austin, TX

May 14 - 17, 2018 Houston, TX

May 15 - 18, 2018 Las Cruces, NM

May 22 - 25, 2018 Arlington, TX

May 22 - 25, 2018 Oklahoma City, OK

May 29 - Jun 1, 2018 Corpus Christi, TX

May 29 - Jun 1, 2018 Little Rock, AR

wMay 29 - Jun 21, 2018 Arlington, TX

zJun 5 - 8, 2018 San Antonio, TX

Jun 11 - 14, 2018 Houston, TX

Jun 12 - 15, 2018 Arlington, TX

Jun 12 - 15, 2018 San Antonio, TX

Jul 9 - 12, 2018 Houston, TX

Jul 10 - 13, 2018 Arlington, TX

zJul 16 - 19, 2018 Houston, TX

Jul 17 - 20, 2018 Baton Rouge, LA



Aug 7 - 10, 2018 Albuquerque, NM

Aug 7 - 10, 2018 Oklahoma City, OK

Aug 14 - 17, 2018 Arlington, TX

Aug 14 - 17, 2018 Shreveport, LA

Aug 21 - 24, 2018 Kilgore, TX



Sep 11 - 14, 2018 Austin, TX

https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OSC510

866-906-9190 | uta.edu/ded 9wEvening Classesp Saturday Classes z Clases en español

CONSTRUCTION OSHA COURSES

OSHA #500Trainer Course in OSHA Standards for Construction30 Hours | $695 Contract | $9,000This course prepares the participants to become a trainer in the OSHA Outreach Training Program, conduct both the 10- and 30-hour Construction Outreach classes, and enables them to issue OSHA Outreach Cards to participants after verifying course completion. Using the OSHA Construction Standards as a guide, the course emphasizes those topics required in the 10- and 30-hour programs, as well as the most hazardous. Participants receive training on effective instructional approaches and the use of visual aids and handouts. Participants must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic and pass a written exam.

Prerequisites: Participants must successfully complete the OSHA #510 OSHA Standards for Construction and have five (5) years of safety and health work experience in the construction industry.

Refresher Training: Authorized OSHA Outreach Training Program trainers are required to attend the OSHA #502 Update for Construction Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.

Aug 15 - 18, 2017 Baton Rouge, LA



Sep 5 - 8, 2017 Kilgore, TX

Sep 12 - 15, 2017 Amarillo-Dumas, TX

Sep 12 - 15, 2017 Houston (South), TX



Oct 17 - 20, 2017 San Antonio, TX


Oct 31 - Nov 3, 2017 Arlington, TX


Nov 7 - 10, 2017 Shreveport, LA

Nov 14 - 17, 2017 Oklahoma City, OK


Nov 28 - Dec 1, 2017 Albuquerque, NM





Jan 16 - 19, 2018 West Memphis, AR


Jan 30 - Feb 2, 2018 Arlington, TX

Feb 27 - Mar 2, 2018 Hot Springs, AR



Mar 27 - 30, 2018 New Orleans, LA



Apr 17 - 20, 2018 Tulsa, OK

Apr 24 - 27, 2018 Bentonville, AR



May 29 - Jun 1, 2018 Arlington, TX

May 29 - Jun 1, 2018 Monroe, LA

Jun 5 - 8, 2018 El Paso, TX



z26 - 29, 2018 San Antonio, TX

Jul 10 - 13, 2018 Austin, TX


Jul 30 - Aug 2, 2018 Houston, TX

zJul 30 - Aug 2, 2018 Houston, TX

Jul 31 - Aug 3, 2018 Little Rock, AR








GENERAL INDUSTRY OSHA COURSES

OSHA #511 OSHA Standards for General Industry30 Hours | $595 Contract | $8,000This course covers the OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles with special emphasis on the most hazardous areas in general industry. Upon course completion participants will be able to define general industry terms found in the OSHA General Industry Standards; identify hazards in general industry; locate and determine appropriate OSHA General Industry Standards, policies, and procedures; and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing workplace safety and health program.

This course satisfies the training prerequisite for the ATP 191 designation in Personal Protective Equipment.


Aug 15 - 18, 2017 Houston (South), TX

Aug 22 - 25, 2017 Farmington, NM

Aug 22 - 25, 2017 Beaumont, TX

Aug 29 - Sep 1, 2017 Arlington, TX

Sep 5 - 8, 2017 Shreveport, LA

Sep 12 - 15, 2017 Texas City, TX

Sep 19 - 22, 2017 El Paso, TX


Sep 26 - 29, 2017 Lake Charles, LA


Oct 10 - 13, 2017 Austin, TX

Oct 17 - 20, 2017 Albuquerque, NM

wOct 23 - Nov 15, 2017 Arlington, TX

Oct 24 - 27, 2017 West Memphis, AR

Oct 30 - Nov 2, 2017 Houston (North), TX


Nov 14 - 17, 2017 Tulsa, OK


Dec 5 - 8, 2017 Baton Rouge, LA

Dec 12 - 15, 2017 Dallas, TX

Dec 12 - 15, 2017 Beaumont, TX


Dec 19 - 22, 2017 Bentonville, AR


Jan 15 - 18, 2018 Houston (South), TX

Jan 24 - 27, 2018 Kilgore, TX

Jan 30 - Feb 2, 2018 San Antonio, TX

pFeb 5 - 15, 2018 Houston, TX


Feb 6 - 9, 2018 Corpus Christi, TX

Feb 6 - 9, 2018 Oklahoma City, OK

Feb 12 - 15, 2018 Houston, TX

Feb 13 - 16, 2018 Las Cruces, NM

Feb 20 - 23, 2018 Amarillo-Dumas, TX

Feb 27 - Mar 2, 2018 New Orleans, LA

Mar 6 - 9, 2018 Austin, TX


Mar 6 - 9, 2018 Bentonville, AR


Mar 13 - 16, 2018 West Memphis, AR

Apr 3 - 6, 2018 El Paso, TX

Apr 3 - 6, 2018 Mesquite, TX


Apr 17 - 20, 2018 Albuquerque, NM

Apr 17 - 20, 2018 Austin, TX


Apr 24 - 27, 2018 Oklahoma City, OK

Apr 30 - May 3, 2018 Houston, TX

May 8 - 11, 2018 Port Lavaca, TX

May 22 - 25, 2018 Baton Rouge, LA

May 29 - Jun 1, 2018 Arlington, TX

May 29 - Jun 1, 2018 Houston (South), TX

Jun 12 - 15, 2018 San Antonio, TX



wJul 10 - Aug 2, 2018 Arlington, TX



Jul 24 - 27, 2018 Little Rock, AR

Jul 24 - 27, 2018 Tulsa, OK

Jul 31 - Aug 3, 2018 Shreveport, LA


Aug 14 - 17, 2018 Lafayette, LA

Aug 21 - 24, 2018 Corpus Christi, TX



https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OSG511


GENERAL INDUSTRY OSHA COURSES

OSHA #501 Trainer Course in OSHA Standards for General Industry30 Hours | $695 Contract | $9,000This course prepares the participant to become a trainer in the OSHA Outreach Training Program, to conduct both the 10- and 30-hour General Industry Outreach classes, and enables them to issue OSHA Outreach Cards to participants after verifying course completion. Using the OSHA General Industry Standards as a guide, this course emphasizes those topics required in the 10- and 30-hour programs, as well as the most hazardous. Participants receive training on effective instructional approaches and the use of visual aids and handouts. Participants must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic and pass a written exam at the end of the course.

Prerequisites: Participants must successfully complete the OSHA #511 OSHA Standards for General Industry and have five (5) years of safety and health work experience in general industry. Refresher Training: Authorized General Industry Outreach Training Program trainers are required to attend the OSHA #503 Update for General Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.

Aug 15 - 18, 2017 San Antonio, TX


Aug 29 - Sep 1, 2017 Amarillo-Dumas, TX

Sep 19 - 22, 2017 Little Rock, AR



Oct 24 - 27, 2017 Lake Charles, LA

Oct 24 - 27, 2017 Houston (South), TX

Oct 31 - Nov 3, 2017 Austin, TX

Nov 7 - 10, 2017 El Paso, TX

Nov 14 - 17, 2017 Albuquerque, NM


Dec 5 - 8, 2017 Corpus Christi, TX







Apr 17 - 20, 2018 San Antonio, TX




May 8 - 11, 2018 El Paso, TX

May 15 - 18, 2018 Oklahoma City, OK

May 15 - 18, 2018 Bentonville, AR

Jun 5 - 8, 2018 Baton Rouge, LA


Jun 26 - 29, 2018 Port Lavaca, TX




Sep 4 - 7, 2018 Little Rock, AR


Sep 18 - 21, 2018 Corpus Christi, TX


wEvening Classesp Saturday Classes

The OSHA #500, #501, #5400 and #5600 are part of the Occupational Safety and Health Administration Outreach Training Program. Completion of these courses authorizes individuals as an Outreach Trainer. Authorized

Outreach Trainers deliver 10- and 30-hour outreach classes to workers in construction, general industry, maritime, and 7.5- and 15-hour classes for disaster site workers. For more information on using the Outreach Portal, or on the Outreach Training Program, see page 14.




























































http://outreachportal.com/


OUTREACH TRAINER UPDATE COURSES

OSHA #502 Update for Construction Industry Outreach Trainers19 Hours | $495 Contract | $7,000This course is for authorized OSHA Outreach Training Program trainers who have completed the OSHA #500 Trainer Course in OSHA Standards for the Construction Industry. The course provides an update on OSHA Construction Standards, policies, and regulations. Upon course completion, participants will be able to demonstrate professional development by applying effective adult learning principles and interactive training techniques to identify, define, and explain construction industry hazards and acceptable corrective measures as they teach the 10- and 30- hour Construction Outreach Training Program classes. Prerequisites: OSHA #500 Trainer Course in OSHA Standards for Construction. Authorized Construction Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status.

Aug 21 - 23, 2017 West Memphis, AR


Sep 5 - 7, 2017 El Paso, TX


Sep 25 - 27, 2017 Albuquerque, NM


Oct 9 - 11, 2017 Bentonville, AR


Oct 30 - Nov 1, 2017 Houston, TX

Nov 13 - 15, 2017 Austin, TX

Nov 27 - 29, 2017 Baton Rouge, LA




Jan 22 - 24, 2018 Austin, TX

Jan 29 - 31, 2018 Port Lavaca, TX



Feb 12 - 14, 2018 Baton Rouge, LA







Mar 26 - 28, 2018 Shreveport, LA

Mar 26 - 28, 2018 Tulsa, OK

Mar 26 - 28, 2018 Little Rock, AR



Apr 16 - 18, 2018 New Orleans, LA



May 14 - 16, 2018 Austin, TX


Jun 4 - 6, 2018 Albuquerque, NM



Jun 18 - 20, 2018 Oklahoma City, OK




Jul 16 - 18, 2018 San Antonio, TX





Aug 27 - 29, 2018 Bentonville, AR


Sep 10 - 12, 2018 Baton Rouge, LA




OUTREACH TRAINER UPDATE COURSES

OSHA #503 Update for General Industry Outreach Trainers19 Hours | $495 Contract | $7,000This course is for authorized OSHA Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry. The course provides an update on OSHA General Industry Standards, policies, and regulations. Upon course completion, participants will be able to demonstrate professional development by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they teach the 10- and 30-hour General Industry Outreach Training Program classes. Prerequisites: OSHA #501 Trainer Course in Standards for General Industry, Authorized General Industry Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status.

Aug 23 - 25, 2017 West Memphis, AR


Sep 7 - 9, 2017 El Paso, TX




Oct 11 - 13, 2017 Bentonville, AR



Nov 15 - 17, 2017 Austin, TX

Nov 29 - Dec 1, 2017 Baton Rouge, LA




Jan 24 - 26, 2018 Austin, TX

Jan 31 - Feb 2, 2018 Port Lavaca, TX



Feb 14 - 16, 2018 Baton Rouge, LA








Mar 28 - 30, 2018 Tulsa, OK







May 16 - 18, 2018 Austin, TX





















OUTREACH TRAINING PROGRAM

The United States Department of Labor OSHA Outreach Training Program provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces. The program also provides information regarding workers’ rights, employer responsibilities, and how to file a complaint. This is a voluntary program and does not meet training requirements for any OSHA standards.

The Outreach Training Portal is a web-based application designed with our trainers in mind to provide a more efficient and reliable method of requesting Outreach participant cards.

For more information about the Outreach Training Program or on using the Outreach Portal, contact our friendly staff at the number below.

Outreach Training Program

OutreachPortal.com | 866.906.9190 | [email protected]

Advantages of being a UTA OSHA Education Center Outreach Trainer:

• Train with some of the best instructors in the business

• Course availability• Course locations near you• Work with our friendly staff• Experience outstanding trainer support

Advantages of using the UTA OSHA Education Center Outreach Portal:

• Simplified submission and recordkeeping• Computer, tablet, or smart phone access• User-friendly, menu-driven• Improved processing speed• Reliability• Ease of communication with our

experienced Outreach Staff



mailto:outreach%40uta.edu?subject=



UTA AUTHORIZED TRAINER PROGRAMATP 191 Safety and Health Authorized Trainer32 Hours | $695 Contract | $9,000 This course incorporates an overview of instructional strategies, design, and practices for adult learning settings. It explores situational and cultural factors that influence adult learning and reviews the requirements of ANSI Z490.1, Criteria for Accepted Practices in Safety, Health, and Environmental Training on how to create, maintain, and evaluate effective EH&S training. Various instructional approaches, classroom management techniques, and the effective use of visual aids and handouts will be covered. Participants will develop informational presentations based upon the technical instruction and individual research requirements. Instruction and hands-on exercises on specific safety and health topics will be provided. The course includes “teach back” sessions to apply the adult learning techniques and effective safety and health training knowledge and skills. Participants will work in small groups or independently to develop the technical information for their presentation on one of the listed topic areas. Successful completion of the course and written and performance examinations will allow the participant to be recognized as an UTA Authorized Trainer.

Aug 15 - 18, 2017 Austin, TX



Nov 7 - 10, 2017 New Orleans, LA



Jul 31 - Aug 3, 2018 Arlington, TX

Authorized Trainer Program

SIX EASY STEPS: 1. Take applicable designation

prerequisite training course2. Complete ATP 191 Safety and

Health Authorized Trainer3. Receive trainer authorization for

qualifying designation4. Instruct class following UTA ATP

guidelines5. Submit course report via Outreach

Portal6. Distribute cards to participants

Become a UT Arlington Authorized Safety & Health TrainerModeled after the OSHA Outreach Program, the goal of the UT Arlington Authorized S&H Trainer Program is to provide training for workers and employers to ensure that the workforce is more knowledgeable about workplace hazards and safety. Through awareness level 8-hour classes, individuals designated as UTA authorized safety & health trainers address the recognition, avoidance, abatement, and prevention of safety and health hazards associated with specific issues in the workplace. Upon course completion, trainers may use the Outreach Portal to request completion cards for their participants.

TOPICS INCLUDE:Bloodborne Pathogens ..........................................................................Pg. 30

Confined Space ......................................................................................Pg. 19

Cranes & Rigging ....................................................................................Pg. 19

Electrical ..................................................................................................Pg. 20

Excavation & Trenching ..........................................................................Pg. 20

Fall Protection .........................................................................................Pg. 21

Hazard Communication/Global Harmonization System (GHS) ..........Pg. 30

Hydrogen Sulfide (H2S) ...........................................................................Pg. 29

Personal Protective Equipment .........................................................Pg. 8, 10

Respiratory Protection ............................................................................Pg. 18

Scaffolding ..............................................................................................Pg. 21


https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~ASHT


https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~asht

https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~asht


OSHA MARITIME/DISASTER SITE COURSES

OSHA #5410 Occupational Safety and Health Standards for the Maritime Industry35 Hours | $695 Contract | $9,000This course covers the OSHA policies, procedures, and standards for the maritime industry, specifically shipyard employment, marine terminals, and longshoring. Special emphasis is on those areas most hazardous in the maritime industry using the OSHA Maritime Standards as a guide.

Jan 8 - 12, 2018 Houston (South), TX


Jul 16 - 20 Beaumont, TX

OSHA #5400 Trainer Course in OSHA Standards for the Maritime Industry30 Hours | $695 Contract | $9,000This course prepares the participant to become a trainer in the Outreach Training Program to conduct 10- and 30-hour maritime classes in shipyard employment, marine terminals, and longshoring, and authorizes them to issue OSHA Outreach Cards to participants after verifying course completion. Participants will receive training on effective instructional approaches and use of visual aids and handouts. Participants must successfully prepare a presentation on an assigned OSHA maritime industry Outreach Training Program topic and successfully pass a written exam. Prerequisites: Participants must successfully complete the OSHA #5410 Occupational Safety and Health Standards for the Maritime Industry, have three (3) years of maritime industry experience, and possess and at least two (2) years of occupational safety and health experience with a broad focus in any industry.

Refresher Training: Authorized Maritime Industry Outreach Training Program trainers are required to attend OSHA #5402 Maritime Industry Trainer Update Course at least once every four (4) years to maintain their trainer status.

Feb 12 - 16, 2018 Houston (South), TX

Apr 30 - May 4, 2018 New Orleans, LA

Aug 6 - 10, 2018 Beaumont, TX

OSHA #5402 Maritime Industry Trainer Update Course19 Hours | $495 Contract | $7,000This course provides trainers with information about updates to the OSHA Maritime standards, policies, and regulations. Upon course completion, participants will be able to demonstrate professional development by applying effective adult learning principles and interactive training techniques to identify, define, and explain maritime industry hazards and acceptable corrective measures.

Prerequisites: OSHA #5400 Trainer Course in OSHA Standards for the Maritime Industry. Authorized OSHA Outreach trainers are required to attend this course once every four (4) years to maintain their trainer status.

Mar 20 - 22, 2018 Houston (South), TX

Jun 12 - 14, 2018 New Orleans, LA

Sep 11 - 13, 2018 Beaumont, TX

OSHA #5600 Disaster Site Worker Trainer Course30 Hours | $695 Contract | $9,000Successful completion of this course authorizes participants to become OSHA Outreach trainers in the Disaster Site Worker Outreach Training Program. Course topics include the National Response Framework; the Incident Command System; disaster work zone safety; respiratory protection, communication issues; application of the elements of successful adult training; and the knowledge, skills, and attitudes of awareness training related to safety and health standards at natural and human-made disaster sites. Participants will prepare and deliver a presentation on an assigned disaster site worker topic.

Prerequisites: OSHA #500 Trainer Course in OSHA Standards for Construction or OSHA #501 Trainer Course in OSHA Standards for General Industry, three (3) years of safety training experience, and completion of the 40-hour HAZWOPER training.Refresher Training: Outreach Training Program trainers are required to attend the OSHA #5602 Update for Disaster Site Worker Trainer course at least once every four (4) years to maintain their Outreach Training Program trainer authorization. Sep 5 - 8, 2017 Houston (North), TX

OSHA #5602 Update for Disaster Site Worker Trainer Course7.5 Hours | $295 Contract | $3,000This course updates the authorized Disaster Site Worker trainer with new technical and regulatory information related to disaster response and the role of OSHA in coordinating occupational safety and health efforts in the National Response Framework. Participants will have the opportunity to share “lessons learned” from teaching the Disaster Site Worker Course.

Prerequisites: Authorized Outreach Training Program trainers are required to attend the OSHA #5600 Disaster Site Worker Trainer Course once every four (4) years to maintain their trainer status. Sep 8, 2017 Houston (North), TX

https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OS5410




















































https://web-ded.uta.edu/wconnect/CourseStatus.awp1?&Course=185600001%20%20%20&DirectFrom=Schedule&Origin=OSHA+#5600






































OTHER OSHA COURSES

OSHA #521OSHA Guide to Industrial Hygiene26 Hours | $595 Contract | $8,000This course covers industrial hygiene practices and related OSHA regulations and procedures. Course topics include recognition, evaluation, and control of chemical, physical, biological, and ergonomic hazards; Permissible Exposure Limits (PEL); OSHA health standards; respiratory protection; engineering controls; OSHA sampling protocols and strategies; and workplace health program elements. Workshops involve participants in health hazard recognition, OSHA health standards, and use of sampling equipment. Upon course completion, participants will be able to recognize basic industrial hygiene principles and practices, identify characteristics of common air contaminants, locate PELs, perform basic industrial hygiene calculations, and determine the methods for hazard control and abatement.

Sep 5 - 8, 2017 Austin, TXSep 12 - 15, 2017 Corpus Christi, TXSep 19 - 22, 2017 West Memphis, ARSep 26 - 29, 2017 Arlington, TXOct 3 - 6, 2017 Houston, TXOct 10 - 13, 2017 Oklahoma City, OKOct 17 - 20, 2017 Midland, TXOct 31 - Nov 3, 2017 Baton Rouge, LANov 7 - 10, 2017 Austin, TXNov 14 - 16, 2017 Dallas, TXDec 5 - 7, 2017 Kilgore, TXDec 18 - 21, 2017 Houston, TXJan 9 - 12, 2018 Arlington, TXJan 15 - 18, 2018 Houston (South), TXJan 23 - 26, 2018 New Orleans, LAJan 30 - Feb 2, 2018 El Paso, TXFeb 6 - 9, 2018 Albuquerque, NMFeb 13 - 16, 2018 Bentonville, ARFeb 20 - 23, 2018 Arlington, TXFeb 27 - Mar 2, 2018 Oklahoma City, OKMar 5 - 8, 2018 Houston, TX

Mar 20 - 23, 2018 Shreveport, LAApr 2 - 5, 2018 Houston, TXApr 10 - 13, 2018 Arlington, TXApr 24 - 27, 2018 Baton Rouge, LA

wMay 1 - 24, 2018 Arlington, TX

May 15 - 18, 2018 Arlington, TXMay 21 - 24, 2018 Houston, TXJun 5 - May 8, 2018 Little Rock, ARJun 19 - 22, 2018 Tulsa, OKJun 25 - 28, 2018 Houston, TXJul 10 - 13, 2018 Austin, TXJul 17 - 20, 2018 Arlington, TXJul 31 - Aug 3, 2018 New Orleans, LAAug 13 - 16, 2018 Houston, TXAug 28 - 31, 2018 Amarillo-Dumas, TXSep 4 - 7, 2018 Arlington, TXSep 10 - 13, 2018 Houston, TXSep 25 - 28, 2018 Lafayette, LA

OSHA #2015 Hazardous Materials26 Hours | $595 Contract | $8,000This course covers OSHA General Industry Standards and other consensus and proprietary standards related to the use of hazardous materials. Course topics include flammable liquids, compressed gases, LP-gases, and cryogenic liquids. Participants will review related processes, such as spraying, dipping, and the use of electrical equipment in hazardous locations. Upon course completion, participants will be able to assess compliance with OSHA hazardous materials standards; determine hazardous (classified) locations; and conduct proper moving, storing, and handling of hazardous materials.


Aug 22 - 25, 2017 El Paso, TX



Sep 19 - 22, 2017 Shreveport, LA

Oct 24 - 27, 2017 Lafayette, LA

Nov 28 - Dec 1, 2017 San Antonio, TX

Nov 28 - Dec 1, 2017 Beaumont, TX




Jan 9 - 12, 2018 Austin, TX

Feb 26 - Mar 1, 2018 Houston, TX

Feb 27 - Mar 1, 2018 Farmington, NM

wFeb 27 - Mar 22, 2018 Arlington, TX

Mar 13 - 16, 2018 Oklahoma City, OK

Mar 20 - 23, 2018 El Paso, TX


Apr 3 - 6, 2018 Corpus Christi, TX

May 15 - 18, 2018 New Orleans, LA




Jul 16 - 19, 2018 Bentonville, AR

Jul 31 - Aug 3, 2018 Austin, TX



Sep 25 - 28, 2018 Tulsa, OK

































































































OTHER OSHA COURSES

OSHA #2045 Machinery and Machine Guarding Standards26 Hours | $595 Contract | $8,000This course covers various types of common machinery, machine safeguards, and related OSHA regulations and procedures. Participants will receive guidance on the hazards associated with various types of machinery and determining proper machine safeguards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), guarding of portable powered tools, control methods and hazard abatement, appropriate machine safeguards, and common OSHA machine guarding violations. Program highlights include the ability to recognize hazards, provide options for control, and hazard abatement through machine safeguarding and inspection workshops.





Oct 23 - 26, 2017 Oklahoma City, OK

Nov 7 - 10, 2017 San Antonio, TX


Dec 12 - 15, 2017 Lafayette, LA




Feb 20 - 23, 2018 El Paso, TX

Mar 6 - 9, 2018 Mesquite, TX

Mar 12 - 15, 2018 Tulsa, OK

Mar 20 - 23, 2018 Port Lavaca, TX


Apr 17 - 20, 2018 Little Rock, AR

May 1 - 4, 2018 Kilgore, TX



Jun 5 - 8, 2018 New Orleans, LA

Jul 10 - 13, 2018 Oklahoma City, OK

Jul 24 - 27, 2018 Austin, TX



Aug 28 - 31, 2018 Las Cruces, NM

Sep 18 - 21, 2018 Bentonville, AR

OSHA #2225 Respiratory Protection26 Hours | $595 Contract | $8,000This course covers the requirements for establishing, maintaining, and monitoring a respiratory protection program. Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon course completion, participants will be able to identify and describe the elements of a respiratory protection program; properly select, use, and inspect respiratory protection and protection factors; and evaluate compliance with the OSHA standards.

This course satisfies the training prerequisite for the ATP 191 designation in Respiratory Protection.


Sep 12 - 15, 2017 Austin, TX

Oct 3 - 6, 2017 Amarillo-Dumas, Texas

Oct 24 - 27, 2017 El Paso, TX

Oct 24 - 27, 2017 New Orleans, LA




Jan 16 - 19, 2018 San Antonio, TX

Feb 27 - Mar 2, 2018 West Memphis, AR

Mar 27 - 30, 2018 Baton Rouge, LA


Apr 24 - 27, 2018 El Paso, TX



Jul 10 - 13, 2018 Corpus Christi, TX

Aug 7 - 10, 2018 Austin, TX














































































OTHER OSHA COURSES

OSHA #2055 Cranes in Construction22.5 Hours | $595 Contract | $8,000This course covers best practices in crane and derrick operation using the OSHA Cranes and Derricks in Construction Rule as a guide. Course topics include hazards associated with crane assembly and disassembly; types of cranes; lifting concepts; rigging and wire rope; signaling; employee qualifications and training; and maintenance, repair, and inspection requirements. Participants will participate in workshops to reinforce concepts of safe crane operation. Upon course completion, Participants will be able to identify the types of cranes and their components and attachments, determine safe operating conditions, and recognize common violations of OSHA Standards.

This course satisfies the training prerequisite for the ATP 191 designation in Cranes & Rigging.

Sep 12 - 14, 2017 Bentonville, AR



Feb 13 - 15, 2018 Dallas, TX


Jun 26 - 28, 2018 Baton Rouge, LA


OSHA #2255 Principles of Ergonomics19 Hours | $595 Contract | $7,000This course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders. Course topics include work physiology; anthropometry; musculoskeletal disorders; use of video display terminals; and risk factors such as vibration, temperature, material handling, repetition, and lifting. Industrial case studies cover analysis and design of workstations and equipment workshops along with coverage of current OSHA policies and guidelines. Upon course completion, participants will be able to recognize work-related musculoskeletal and nerve disorders, assess ergonomic programs, and conduct ergonomic evaluations.


Oct 17 - 19, 2017 Amarillo-Dumas, Texas



wNov 28 - Dec 14, 2017 Arlington, TX

Dec 5 - 7, 2017 Bentonville, AR



May 8 - 10, 2018 New Orleans, LA



Jul 17 - 20, 2018 Tulsa, OK

Aug 21 - 23, 2018 Austin, TX

OSHA #2264 Permit-Required Confined Space Entry22.5 Hours | $595 Contract | $8,000This course covers safety and health hazards associated with permit-required confined space entry. Course topics include both the OSHA Permit-Required Confined Space Standards for Construction and General Industry; identification of permit- and non-permit-required confined spaces; ventilation techniques; development and implementation of a confined space program; and training requirements. This course features workshops on permit entry classification, instrumentation, and program development.

This course satisfies the training prerequisite for the ATP 191 designation in Confined Space.

Aug 29 - 31, 2017 Albuquerque, NMSep 5 - 7, 2017 Houston, TXSep 5 - 7, 2017 Oklahoma City, OKSep 12 - 14, 2017 Austin, TXSep 12 - 14, 2017 El Paso, TXSep 19 - 21, 2017 Arlington, TXSep 26 - 28, 2017 Lafayette, LAOct 10 - 12, 2017 Houston, TXOct 17 - 19, 2017 Oklahoma City, OKOct 24 - 26, 2017 Farmington, NMOct 31 - Nov 2, 2017 Arlington, TXNov 7 - 9, 2017 Little Rock, ARNov 14 - 16, 2017 Houston, TXNov 28 - 30, 2017 Houston (South), TXDec 12 - 14, 2017 Kilgore, TXDec 12 - 14, 2017 San Antonio, TXDec 19 - 21, 2017 Albuquerque, NMDec 19 - 21, 2017 Mesquite, TX

wJan 16 - Feb 1, 2018 Arlington, TX

Jan 16 - 18, 2018 Monroe, LAFeb 20 - 22, 2018 Houston, TXFeb 27 - Mar 1, 2018 Arlington, TXMar 6 - 8, 2018 Tulsa, OKMar 13 - 15, 2018 Corpus Christi, TXMar 27 - 29, 2018 Albuquerque, NMApr 3 - 5, 2018 Austin, TXApr 10 - 12, 2018 West Memphis, ARApr 17 - 19, 2018 Arlington, TXApr 24 - 26, 2018 Amarillo-Dumas, TXMay 1 - 3, 2018 Baton Rouge, LAMay 8 - 10, 2018 Shreveport, LAMay 29 - 31, 2018 Houston, TXJun 12 - 14, 2018 Arlington, TXJun 19 - 21, 2018 Bentonville, ARJun 26 - 28, 2018 El Paso, TXJul 10 - 12, 2018 San Antonio, TXJul 24 - 26, 2018 Oklahoma City, OKJul 31 - Aug 2, 2018 Port Lavaca, TXAug 7 - 9, 2018 Arlington, TXAug 21 - 23, 2018 Hot Springs, ARSep 4 - 6, 2018 Houston, TX









































































































OTHER OSHA COURSES

OSHA #3015 Excavation, Trenching, and Soil Mechanics22.5 Hours | $595 Contract | $8,000This course covers the OSHA Excavation Standard and safety and health aspects related to excavation and trenching. Course topics include the relationship between practical soil mechanics and the stability of shored and unshored slopes and walls, introduction of various types of shoring, soil classification, and use of protective systems. Participants participate in workshops in the use of instruments such as penetrometers, Torvane shears, and engineering rods to demonstrate testing methods. Participants will be able to assess compliance with the Standard, use soil testing methods to classify soil types, determine protective systems for excavation operations, and understand the training requirements.

This course satisfies the training prerequisite for the ATP 191 designation in Excavation & Trenching.


Sep 12 - 14, 2017 New Orleans, LA


Oct 3 - 5, 2017 Austin, TX




Nov 14 - 16, 2017 Corpus Christi, TX

Nov 28 - 30, 2017 Las Cruces, NM


Dec 19 - 21, 2017 Austin, TX

Jan 23 - 25, 2018 El Paso, TX


Feb 6 - 8, 2018 Little Rock, AR



wMar 27 - Apr 19, 2018 Arlington, TX

Apr 3 - 5, 2018 Baton Rouge, LA


May 8 - 10, 2018 Albuquerque, NM


Jun 5 - 7, 2018 Shreveport, LA

Jun 19 - 21, 2018 Amarillo-Dumas, TX


Jul 17 - 19, 2018 Austin, TX

Jul 24 - 26, 2018 El Paso, TX

Aug 7 - 9, 2018 Farmington, NM

Aug 21 - 24, 2018 Tulsa, OK



OSHA #3095Electrical Standards26 Hours | $595 Contract | $8,000This course covers the OSHA Electrical Standards and hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters (GFCI), and safety-related work practices. Emphasis is on electrical hazard recognition, OSHA Standards and policies, hazard recognition and abatement measures, and procedures. Applicable portions of the National Electrical Code (NEC) are also covered. Participants will participate in workshops on the safe and correct use of electrical testing equipment.

This course satisfies the training prerequisite for the ATP 191 designation in Electrical.

Aug 29 - Sep 1, 2017 Port Lavaca, TX


Sep 18 - 21, 2017 Houston (North), TX

Sep 26 - 29, 2017 Austin, TX



Nov 28 - Dec 1, 2017 Bentonville, AR

Nov 28 - Dec 1, 2017 Oklahoma City, OK


Jan 9 - 12, 2018 Mesquite, TX

Jan 30 - Feb 2, 2018 Little Rock, AR

Feb 6 - 9, 2018 El Paso, TX


Feb 20 - 23, 2018 Austin, TX


Mar 6 - 9, 2018 New Orleans, LA

Mar 27 - 30, 2018 Amarillo-Dumas, TX

Apr 3 - 6, 2018 Farmington, NM





May 22 - 25, 2018 West Memphis, AR

May 29 - Jun 1, 2018 Kilgore, TX

Jun 12 - 15, 2018 Austin, TX



Jul 17 - 20, 2018 Albuquerque, NM

Jul 24 - 27, 2018 Shreveport, LA

Aug 14 - 17, 2018 El Paso, TX

Aug 28 - Sep 1, 2018 Tulsa, OK


Sep 11 - 14, 2018 Port Lavaca, TX

https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OSH301































































































OTHER OSHA COURSES

OSHA #3115Fall Protection22.5 Hours | $595 Contract | $8,000This course covers OSHA Fall Protection Standards for construction, as well as an overview of fall protection methods. Course topics include the components and limitations of fall arrest systems, and the OSHA Standards and policies regarding fall protection. Workshops provide participants the opportunity for demonstrating the proper inspection and use of fall protection equipment and fall arrest systems, training requirements, and the methods for developing a fall protection program.

This course satisfies the training prerequisite for the ATP 191 designation in Fall Protection.




zSep 18 - 20, 2017 Houston, TX



Oct 31 - Nov 2, 2017 Oklahoma City, OK


Nov 28 - 30, 2017 Austin, TX


Dec 19 - 21, 2017 New Orleans, LA

Jan 9 - 11, 2018 Dallas, TX

Jan 16 - 18, 2018 El Paso, TX



wFeb 6 - Feb 22, 2018 Arlington, TX




Apr 3 - 5, 2018 Shreveport, LA




May 1 - 3, 2018 Corpus Christi, TX

May 8 - 10, 2018 Baton Rouge, LA

pMay 8 - 17, 2018 Houston, TX


zMay 22 - 24, 2018 San Antonio, TX

May 29 - 31, 2018 Amarillo-Dumas, TX


Jul 10 - 12, 2018 El Paso, TX



Jul 31 - Aug 2, 2018 West Memphis, AR



OSHA #3085Principles for Scaffolding 22.5 Hours | $595 Contract | $8,000This course covers the requirements for construction and the safe construction and use of scaffolding, using the OSHA construction scaffold standard as a guide. Participants will participate in workshops to reinforce concepts of safe scaffolding. Upon course completion participants will have be able to identify the types of scaffolds and their components, determine safe assembly, use, and disassembly, and recognize common violations of OSHA Standards.

This course satisfies the training prerequisite for the ATP 191 designation in Scaffolding.

zAug 28 - 30, 2017 Houston, TX

Sep 19 - 21, 2017 Austin, TX



zMay 29 - 31, 2018 San Antonio, TX


OSHA #5810 Hazards Recognition and Standards for On-Shore Oil and Gas Exploration and Production30 Hours | $695 Contract | $9,000This course instructs participants on how to protect themselves and others by developing the knowledge and skills to anticipate, recognize, evaluate, and control hazards common to the on-shore oil and gas exploration and production industry. Material presented applies to work sites associated with the on-shore exploration and production oil and gas industry including, but not limited to, construction, drilling, completion, well servicing, production, product gathering and processing, and product transmission sites.


Oct 10 - 13, 2017 Kilgore, TX

Oct 24 - 27, 2017 Beaumont, TX

Dec 11 - 14, 2017 Beaumont, TX

Jan 30 - Feb 2, 2018 Midland, TX

Apr 24 - 27, 2018 Houston (South), TX


NEW!






































































OSHA SHORT COURSES

OSHA #6005 Collateral Duty Course for Other Federal Agencies30 Hours | $595 Contract | $8,000This course for federal agency collateral duty safety and health personnel covers the OSH Act, Executive Order 12196, and the OSHA General Industry Standards. Upon completion, participants will be able to define general industry terms; identify hazards; determine appropriate standards and regulations for federal agencies; and describe the use of the OSHA General Industry Standards and regulations. OSHA #6015 Occupational Safety and Health Course for Other Federal Agencies65 Hours Contract | $21,000Designed for federal employees responsible for the occupational safety and health programs at their respective agencies. Topics include the OSH Act, Executive Order 12196, 29 CFR 1960 and 1910 General Industry Standards, understanding the Federal Safety and Health program regulations, identification of safety and health hazards, hazard abatement, and construction focus four topics.

Labor Rights WeekThis fall, in recognition of Labor Rights Week, The University of Texas at Arlington OSHA Education Center is offering a series of free short courses. Registration opens exactly one week before each course offering.

AUGUST 28, 2017

OSHA #7105 Arlington, TX


SEPTEMBER 1, 2017

OSHA #7410 (en Español) Houston, TX

SEPTEMBER 8, 2017

OSHA #7410 San Antonio, TX

OSHA #7105Oklahoma City, OK

OSHA #7845Oklahoma City, OK

OSHA #7500Houston (South), TX

SEPTEMBER 11, 2017

OSHA #7115 Albuquerque, NM

OSHA #7410Baton Rouge, LA

OSHA #7300Bentonville, AR


Contract TrainingOSHA #7000 OSHA Training Guidelines for Safe Patient Handling

7.5 Hours Contract | $3,000

OSHA #7110 Safe Bolting: Principles and Practices

7.5 Hours Contract | $3,000 OSHA #7125Seminar on Combustible Dust Hazards


OSHA #7200 Bloodborne Pathogens Exposure Control for Healthcare Facilities


OSHA #7210 Pandemic Influenza Preparedness


Call 866.906.9190 or visit uta.edu/ded/osha for more information

https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OSG71A














https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OSG71B
























uta.edu/ded/osha

866-906-9190 | uta.edu/ded 23

OSHA SHORT COURSES

wEvening Classesp Saturday Classes z Clases en español

OSHA #7005 Public Warehousing and Storage7.5 Hours Contract | $3,000This course covers the hazards and injuries likely to occur in public warehousing and storage operations, including encounters with powered industrial trucks, material handling, lifting and ergonomics, hazard communication, walking and working surfaces, and life safety including fire protection and evacuation. This course is for warehouse workers, supervisors, and employers responsible for developing safe work practices and procedures in a warehouse setting.

p Oct 7, 2017 Arlington, TX

OSHA #7100 Introduction to Machinery and Machine Safeguarding7.5 Hours Contract | $3,000This course covers the process to identify, select and properly safeguard machinery to protect employees and others in the work area and provide training in safe work practices. Participants will be able to explain the hazardous actions and motions of various types of machinery, identify methods of safeguarding, and match identified safeguards with the applicable OSHA Machinery and Machine Guarding Standards to reduce and eliminate the potential for accidents and injuries.

Sep 11, 2017 Arlington, TX

OSHA #7105 Evacuation and Emergency Planning4 Hours Contract | $3,000This course covers the OSHA requirements for emergency action and fire protection plans. Workshops involve participants in the development of emergency action plans. Participants will be able to list the elements of an emergency action plan and emergency evacuation floor plans, recognize violations of OSHA exit route requirements, and develop and implement workplace emergency action and fire protection plans.

Aug 28, 2017 Arlington, TX

Sep 8, 2017 Oklahoma City, OK

p May 5, 2018 Arlington, TX

OSHA #7115 Lockout/Tagout7.5 Hours Contract | $3,000This course covers the role and responsibility of the employer in developing and implementing an energy control or lockout/tagout (LOTO) program. Topics include types of hazardous energy, detecting hazardous conditions, implementing control measures as they relate to controlling hazardous energy, and developing and implementing energy control programs. Participants will be able to explain the importance of energy control programs, procedures, training, and audits.

Sep 11, 2017 Albuquerque, NM

p Sep 23, 2017 Arlington, TX

OSHA #7205 Health Hazard Awareness7.5 Hours Contract | $3,000This course covers common health hazards encountered in the workplace. These health hazards include exposure to chemicals, asbestos, silica and lead. Course topics include identification and evaluation of health hazards and their sources of exposure, health hazard information, and engineering and work practice controls. Participants participate in workshops on the evaluation and abatement of workplace health hazards. Participants will be able to assess common health hazards in the workplace and the methods for controlling and abating these hazards.

OSHA #7225Transitioning to Safer Chemicals15 Hours | $395 Contract | $5,000This course covers a proactive approach toward reducing the use of hazardous chemicals in the workplace by transitioning to safer alternatives. Course topics include identification, evaluation, assessment, and implementation of safer chemical alternatives. In particular, participants will use OSHA’s seven-step substitution planning process. The course features workshops and hands-on activities with use of various online chemical databases and tools. Participants will be able to recognize and evaluate hazardous chemicals in their workplace, assess safer alternatives, and implement those alternatives.

OSHA #7300 Understanding OSHA’s Permit-Required Confined Space Standard7.5 Hours Contract | $3,000This course covers the requirements of the OSHA Permit-Required Confined Space Standard. The course covers the OSHA requirements for both general industry and construction. This course is designed for the small business owner or the responsible party (line supervisor or manager) for developing a permit-required confined space program. Participants will have a basic understanding of confined space hazards, evaluation, and abatement of the hazards, and determination of when a confined space must be classified as a permit-required confined space.

Sep 11, 2017 Bentonville, AR


OSHA #7400 Noise Hazards in the Construction Industry7.5 Hours Contract | $3,000This course covers the evaluation and reduction of noise hazards in the construction industry. Course topics include OSHA Construction Noise Standards, properties of sound, noise-induced hearing loss, noise exposure control, the selection and use of hearing protection, conducting sound level surveys, and worker training. Classroom demonstrations cover noise instrumentation and hearing protection devices. Participants will understand the properties of sound and its relationship to noise-induced hearing loss, hearing protection usage, how to conduct sound level surveys, and the requirements for training workers.






















































































https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OSC74A














OSHA SHORT COURSES

OSHA #7405 Fall Hazard Awareness for the Construction Industry7.5 Hours Contract | $3,000This course covers the identification, evaluation, prevention, and control of fall hazards in the construction industry. The course focuses on falls to a lower level rather than falls to the same level resulting from slips and falls. Course topics include identification, analysis, and prevention of fall hazards using the OSHA Fall Protection Standards. Participants will be able to identify fall hazards and employ OSHA-compliant methods to control and abate these hazards.

wSep 21, 2017 Arlington, TX

OSHA #7410 Managing Excavation Hazards7.5 Hours Contract | $3,000In this course, participants learn about the responsibility of the employer to assign a competent person to the excavation site and prepare them with the knowledge to perform work properly and safely. Topics include an understanding and application of definitions from OSHA’s Excavation Standard (Subpart P), excavation hazards and control measures, soil analysis techniques, protective system requirements, and emergency response. Participants will understand the importance and duties of a competent person for excavation work and the knowledge and skills required.

Sep 1, 2017 Houston, TX

Sep 8, 2017 San Antonio, TX

Sep 11, 2017 Baton Rouge, LA

wSep 19, 2017 Arlington, TX

OSHA #7500 Introduction to Safety & Health Management7.5 Hours | $195 Contract | $3,000This course covers the implementation of an effective safety and health management system. The course addresses the core elements of an effective safety and health management system and those central issues that are critical to management of each element. This interactive training session, with class discussion and workshops provides participants with the ability to evaluate, develop, and implement an effective safety and health management system.

Sep 8, 2017 Houston (South), TX

OSHA #7505 Introduction to (Incident) Accident Investigation7.5 Hours Contract | $3,000This course introduces basic accident investigation procedures and describes accident analysis techniques. Intended for employers, managers, employees, and employee representatives involved in conducting accident and/or near-miss investigations, the course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and incident investigation procedures. This interactive training session, based on class discussion and workshops, provides participants with the basic skills necessary to conduct effective workplace incident investigations.

Sep 22, 2017 Beaumont, TX

p Sep 30, 2017 Arlington, TX

OSHA #7510 Introduction to OSHA for Small Business4 Hours Contract | $3,000This course covers an introduction to the Occupational Safety and Health Administration (OSHA) and the OSH Act for owners and managers of small businesses. Course topics include an introduction to OSHA, OSHA Standards, the inspection process, implementing a safety and health program, worker training requirements and assistance available to small businesses. Participants will understand OSHA operations and procedures and how to work with OSHA to prevent or reduce injuries and illnesses in their workplace.

OSHA #7845 Recordkeeping Rule Seminar4 Hours | $125 Contract | $3,000This course covers the OSHA requirements for maintaining and posting records of occupational injuries and illnesses and reporting specific cases to OSHA. Participants will be able to identify OSHA requirements for recordkeeping, posting, and reporting occupational injuries and illnesses as well as complete the OSHA Form 300 Log of Work-Related Injuries and Illnesses, the OSHA Form 300A Summary of Work-Related Injuries and Illnesses, and the OSHA Form 301 Injury and Illness Incident Report.

Aug 20, 2017 Beaumont, TX

Aug 28, 2017 Arlington, TX

Sep 8, 2017 Oklahoma City, OK


https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OSC74B














































































These 3-day courses are designed for personnel who may be designated as the Competent Person by their employer. They incorporate specific ANSI standards, US Army Corps of Engineer EM 385-1-1 requirements, and other consensus standards in addition to the OSHA requirements. They include active participation with hands-on activities and demonstrations. These courses are also recommended for any construction, maintenance, or supervisory personnel with specific responsibilities in the covered activities.* CPT 101 Fall Protection for the Competent Person24 Hours | $595 Contract | $8,000This course is designed for typical construction-related activities involving working at height or personnel who use fall prevention and/or protection equipment and systems or who is responsible for safety at their job sites where fall hazards exist. The topics covered include fall hazard recognition, evaluation, and control; construction exposures and applications; detailed review of fall protection regulations and requirements; hierarchy of fall protection systems; fall hazard evaluation; eliminating and controlling fall hazards; aerial lifts and ladders; developing and maintaining a managed fall protection program; fall protection procedures, rescue procedures, training; and incident investigations.

CPT 102 Excavation and Trenching Safety for the Competent Person24 Hours | $595 Contract | $8,000This course is designed for typical construction-related trenching and excavation activities or personnel responsible for safety at their job sites where excavation hazards exist. The topics covered include hazard recognition, evaluation, and control; construction exposures and applications; trenching and excavation regulations and requirements; soil classification; excavation hazard abatement; selection of suitable worker protection systems; pre-engineered and engineered systems; access and egress; and incident investigations.

Dec 5 - 7, 2017 El Paso, TX

CPT 103 Scaffolding Safety for the Competent Person24 Hours | $595 Contract | $8,000This course is designed for typical construction-related scaffolding erection, use, maintenance, and dismantling activities or personnel responsible for safety at their job sites where scaffolding is used. The topics covered include hazard recognition, evaluation, and control; construction exposures and applications; a detailed review of scaffolding regulations and requirements; eliminating and controlling hazards; conducting hazard surveys and inspections; access and egress; and incident investigations.


Dec 12 - 14, 2017 Austin, TX

CPT 104Confined Space Entry for the Competent Person24 Hours | $595 Contract | $8,000This course is designed for confined space operations or personnel involved in confined space operations. The topics covered include hazard recognition, evaluation, and control; construction exposures and applications; a detailed review of confined space regulations and requirements; hazard evaluation and classification of confined spaces; eliminating and controlling confined space hazards to include hazardous atmospheres, mechanical; electrocution, fire and explosions; developing and maintaining a managed confined space program; conducting hazard surveys and inspections; classification and permit procedures, ventilation, evacuation and rescue procedures, training; and incident investigations.

Aug 15 - 17, 2017 La Porte, TX



CPT 105Qualified Rigger and Signalperson24 Hours | $595 Contract | $8,000This course is designed for personnel who oversee crane operations and lifts or are required to be Qualified Riggers/Signalpersons. The topics covered include hazard recognition, evaluation, and control; construction exposures and applications; proper rigging principles and techniques; knots; tagline use; working load limits, mathematical calculations, and sling angles and load angle factors; sling selection and usage; wire rope and chain design; rigging inspection, proper rigging hardware inspection, and hook inspection and use; conditions and causes for removal; wedge sockets; hitches, crane characteristics and dynamics; requirements of the signal person; and hand signals and voice communication.


CPT 106Silica for the Competent Person24 Hours | $595 Contract | $8,000This course is designed to meet the new requirements for silica-competent person capable of recognizing and evaluating situations where overexposure may be occurring. The topics covered include routes of silica exposure; health effects of silica overexposure; exposure levels and tasks associated with acute and chronic silicosis; occupational exposure level and how exposures are measured; current regulations and best practices; determination of presence of silica through bulk sample analysis; material safety data sheets and material checklists; and controls to reduce silica exposures.


*Prerequisites: OSHA #500 Trainer Course in OSHA Standards for Construction or ATP 191 Safety and Health Authorized Trainer. These courses satisfy the training requirements of OSHA, ANSI, and USACE 385-1-1.

COMPETENT PERSON COURSES

The courses listed on this page feature no U.S. Department of Labor or OSHA affiliation, approval, or endorsement.


https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~CPT101













https://web-ded.uta.edu/wconnect/CourseStatus.awp1?&Course=18CPT102001%20&DirectFrom=Schedule&Origin=CPT+102




































































wEvening Classesp Saturday Classes z Clases en español26 University of Texas at Arlington | OSHA Education Center

SAFETY & HEALTH COURSES

SH 200 OSHA/Joint Commission Healthcare Safety Overview & Crosswalk8 Hours | $195 Contract | $3,000This course will prepare participants to evaluate the readiness of a healthcare organization pursuing accreditation by the Joint Commission. Participants crosswalk the OSHA 29 CFR 1910 General Industry Standards and Joint Commission Accreditation Manual Chapters covering Environment of Care (EC), Emergency Management (EM), Life Safety (LS) and Infection Control (IC). In addition, if applicable, references will be made to provisions of the Centers for Medicare Services (CMS) conditions of Participation. Participants investigate the numerous agencies, funding sources, investors and interest groups that contribute to regulatory and compliance requirements. Case studies are used to highlight and direct participant activities and identify areas for further investigation. This course is available for 9.6 Contact Hours of Nursing Continuing Education.



Oct 16 - 16, 2017 Austin, TX



May 14 - 14, 2018 Houston (South), TX


SH 201Trainer Course for Healthcare Employee Safety & Health16 Hours | $395 Contract | $6,000This course is designed for healthcare professionals who plan to present safety and health content to their employees and colleagues. The program covers topics specific to making safety and health training engaging, relevant, and impactful for all healthcare workers. In addition to the content, the participants will receive a Trainer’s Tool Kit with a variety of resources and training materials.



Oct 17 - 18, 2017 Austin, TX






SH 202 Trainer Course for Medic First Aid and CPR16 Hours | $495 Contract | $7,000This course is designed to help participants build essential life-saving skills. Participants will be qualified to train others in Medic First Aid/CPR, use of Automated External Defibrillators (AEDs), disease prevention from Bloodborne Pathogens, and Infant and Child rescue skills and AED applications. Participants will apply these skills in optional scenario-based practices. Upon course completion, participants will be approved to instruct MEDIC First Aid training programs in BasicPlus, CarePlus, Bloodborne Pathogens, Emergency Oxygen, and Child/Infant Supplement.



Oct 19 - 20, 2017 Austin, TX







MEDIC First Aid® is a leading provider of corporate CPR, AED, and first aid training programs. For 35 years, MEDIC First Aid Training Programs have used a scenario-based, video-directed, instructional approach that combines seeing, hearing, speaking, feeling, and doing to engage participants, embrace different learning styles, and make teaching and learning easier and more enjoyable. All backed by outstanding customer service and technical support. Learn more at hsi.com/medicfirstaid.

https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~HC200
























https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OHC301


















https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OSg400





















https://emergencycare.hsi.com/

https://emergencycare.hsi.com/


Available by ContractSH 400 Front-Line Construction Supervisor Safety Training24 Hours Contract | $7,000 SH 500 Principles of Industrial Ventilation24 Hours Contract | $9,000

Call 866.906.9190 or visit uta.edu/ded/osha for more information

SAFETY & HEALTH COURSES

SH 210 OSHA’s New Silica Standard16 Hours Contract | $5,000Learn what OSHA’s new Silica Standard means to the Oil and Gas Industry. This training will explain the result of assessments by NIOSH: identify the sources of silica exposure in Oil & Gas, and discuss the changes in the new silica standard, the impact on Oil and Gas, and the timeline for implementing these new requirements. Requirements for air monitoring, engineering controls and work practices to control exposure, controlling access to high-exposure sites, use of respiratory protection, employee training, and medical surveillance related to minimizing silica exposures will be discussed.

SH 321 Electric Arc Flash and NFPA 70-E Awareness Training16 Hours Contract | $5,000This course is based on electrical safety measures required in and out of the field. Course will cover personal protective equipment requirements, potential electrical hazards, and the standards that must be met to prevent harmful situations.

SH 385O EM 385-1-1 Construction Requirements with OSHA 30-Hour Construction40 Hours Contract | $10,000This course is designed for contractors, military, and government employees who enforce, or must comply with, U.S. Army Corps of Engineers (USACE) safety and health requirements (EM 385-1-1, U.S. Army Corps of Engineers Safety & Health Requirements Manual) and OSHA 29 CFR 1926. Attendees will learn the unique procedures established by the USACE contracts and EM 385-1-1, as well as the corresponding OSHA construction safety requirements. Topics include recognition, avoidance, abatement, and prevention of safety and health hazards in construction. Specific topics cover preparation of site-specific accident prevention plan (APP), activity hazard analysis (AHA) development, site personnel training, incident response, and jobsite auditing.

Dec 12 - 15, 2017 Austin, TX


Mar 13 - 16, 2018 El Paso, TX

Jul 31 - Aug 2, 2018 Las Cruces, TX

SH 520 Industrial Hygiene Techniques24 Hours | $595 Contract | $7,000This course introduces participants to industrial hygiene concepts, principles, and practices to evaluate physical and chemical hazards in the workplace. Participants will learn to use and calibrate industrial hygiene measurement equipment, such as personal sampling pumps, indoor air quality meters, and gas analyzers. They will learn sampling methods and techniques for various potential workplace hazards.





wEvening Classesp Saturday Classes z Clases en español28 University of Texas at Arlington | OSHA Education Center

LIFE SAFETY/FIRE SAFETY COURSES

LS 101 Life Safety Code Concept32 Hours | $695 Contract | $10,000This course provides training and application of the concepts of NFPA 101 Life Safety Code requirements that protect people, property, and equipment. The course covers a host of topics related to reducing the spread of fire in buildings and providing a means of safe egress from buildings. Case studies and exercises will be used to convey the concepts supporting the code and its relationship to OSHA and Building Code requirements. Participants will receive a copy of the NFPA 101 Life Safety Code.

Aug 29 - Sep 1, 2017 San Angelo, TX

Sep 12 - 15, 2017 Houston (South), TX

Sep 26 - Sep 29, 2017 La Marque, TX


Jan 23 - Jan 26, 2018 Houston, TX

Apr 24 - Apr 27, 2018 Arlington, TX

Jul 10 - Jul 13, 2018 Arlington, TX

LS 105A Life Safety for Correctional and Detention Facilities32 Hours | $695 Contract | $8,000Participants will receive training on the application of NFPA 101 Life Safety Code requirements to specific building use based on the occupancy classification system Correctional Facilities Occupancies. Participants will learn the unique methods that are used to provide protection and security, such as the role of an adequately trained staff, facility arrangements, and the use of specialized procedures for design, construction, compartmentation, detection, and extinguishment. This course is designed for correctional facility administrators, building managers, facility engineers, safety and health professionals, engineers, architects, building owners, and insurers.


FS 1000 Building Construction for the Fire Service24 Hours | $595 Contract | $7,000Participants learn the components of building construction as they relate to firefighter safety and life safety, identify various classifications of building construction, and explain the theoretical concepts of how fire impacts the major types of building construction. They will gain knowledge on the elements of construction and the design of structures that are key factors when inspecting buildings, pre-planning fire operations, and operating during emergencies. Upon course completion, participants will be better able to identify the indicators of potential structural failures as they relate to firefighter safety and how to respond to fires in various types of construction.

FS 1500 Fire Safety and Health Management40 Hours | $695 Contract | $10,000This course outlines the Fire and Emergency Services Occupational Safety and Health Management System as described in NFPA 1500. It is intended to provide a method to assess a fire department’s occupational safety and health management program. The course provides participants with the tools necessary to develop the components of the program, including facility inspection, equipment inspection, and management system evaluation.

FS 710 Blueprint Reading for the Fire Service16 Hours | $395 Contract | $5,000This course provides basic instruction on blueprint reading so that participants can better understand construction blueprints and various trade schematics used in building construction. Participants learn to identify and interpret the different symbols and abbreviations related to fire, life safety, plumbing, heating and ventilation, and electrical construction drawings, schematics, and wiring diagrams. Participants will also learn fire safety and building code requirements and be able to identify hazards during the various project design phases. The training will enable participants to provide construction recommendations that will improve overall safety of the facility and the construction process.

FS 860 Applied Fire/Safety Protection and Emergency Analysis40 Hours | $795 Contract | $10,000In this interactive course, participants will develop a comprehensive working knowledge of fire protection and prevention as it pertains to life safety within the workplace. Topics include historical background on codes and standards, legal and ethical authority, fire safety, building construction, building occupancy classifications, means of egress, features of fire protection, tent fire safety code analysis, building rehabilitation, field inspections, and detailed information on the Incident Command System.



https://web-ded.uta.edu/wconnect/CourseStatus.awp1?&Course=17LS101010%20%20&DirectFrom=Schedule&Origin=LS+101+-+Life+Safety+Code+Concept


















https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~fs1500










https://web-ded.uta.edu/wconnect/CourseStatus.awp1?&Course=17FS710007%20%20&DirectFrom=Schedule&Origin=Blueprint+Reading+for+the+Fire+Service













https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~FS860












https://web-ded.uta.edu/wconnect/CourseStatus.awp?&Course=firehome


HAZARDOUS MATERIALS COURSES

OG 200 Trainer Course in H2S (Hydrogen Sulfide)20 Hours | $595 Contract | $7,000This trainer course will provide participants with the skills and knowledge to educate employers and employees on the hazards associated with Hydrogen Sulfide (H2S). The course is designed for personnel interested in conducting H2S training for companies in the petroleum industry or for those with H2S present at their facilities. Special emphasis is placed on ANSI/ ASSE Z390.1 and required topics in 29 CFR 1910.1200, Hazard Communication.

Refresher training: Authorized Hydrogen Sulfide trainers are required to attend the OG 201 Update for H2S (Hydrogen Sulfide) Trainer Course once every three (3) years to maintain their trainer status.

Aug 22 - 24, 2017 Albuquerque, NM

Oct 24 - 26, 2017 San Antonio, TX


Dec 5 - 7, 2017 Houston (North), TX

OG 201 Update for H2S (Hydrogen Sulfide) Trainer Course7.5 Hours | $195 Contract | $3,000This update course provides trainers with the skills and knowledge to educate employers and employees on the hazards associated with H2S (Hydrogen Sulfide). This course is required once every three (3) years for all personnel teaching H2S classes in accordance with ANSI Z390.1. It provides timely information on hazards, policies, and regulations, with specific emphasis on the ANSI Z390.1 Standard.

Prerequisites: OG 200 Trainer Course in H2S (Hydrogen Sulfide)

Aug 21, 2017 Albuquerque, NM

Oct 27, 2017 San Antonio, TX

Nov 17, 2017 Arlington, TX

Dec 8, 2017 Houston (North), TX

OG 202 H2S (Hydrogen Sulfide)20 Hours | $595 Contract | $7,000This course provides comprehensive training on the hazards associated with H2S and their required protective measures. Participants will learn the properties and characteristics, respiratory protection requirements, gas detection, emergency response, and current H2S technology. Hands-on exercises and equipment demonstrations are included. The requirements in the ANSI Z390.1, Accepted Practices for Hydrogen Sulfide Training, American Petroleum Institute (API) Recommended Practices, and Federal H2S regulatory standards are also covered. This course is designed for personnel working in the petroleum industry, municipalities, utilities, research and development laboratories, transportation, paper/pulp/food processing, and chemical manufacturing companies.

Mar 20 - 21, 2018 Kilgore, TX




DR 560 ICS/NIMS for the Disaster Response Supervisor & Professional24 Hours Contract | $7,000This course is designed for those individuals who may have leadership responsibilities at a natural or human-caused disaster site. The Incident Command System (ICS) and the National Incident Management System (NIMS) are studied in detail with emphasis on their roles and uses during the crisis and consequence management phases of disaster response work. The topics covered include the history, features and principles, and organizational structure of ICS; introduction and overview of NIMS; the relationship between ICS and NIMS; operating efficiently during an incident or event within ICS; the intent, key concepts and principles underlying NIMS; and the purpose of the NIMS components, including preparedness, communications and information management, resource management, and command and management.

DR 660 Incident Management Training32 Hours | $695 Contract | $8,000This course provides training in Incident Command under the National Incident Management System (NIMS) for Corporate Organizations. The training provides an introduction to the Incident Command System (ICS) and then develops the knowledge and skills necessary for personnel who are likely to assume a supervisory position during Incident Command. This course describes the history, features, principles, and organizational structure, as well as the organization and operation of the ICS and Incident Command Hazardous-Material. The topics covered include management of resources, the duties of all positions, and examples of how these principles are used in incident and event planning. It also explains the relationship between ICS and NIMS.




https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OSGH2S


















https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~SH201















https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OG202


















https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~OSh560
















ONLINE TRAINING

EARN YOUR DEGREE ONLINEThrough the NorthWest Arkansas Community College in Bentonville, AR, Certified Safety and Health Official (CSHO)

recipients can receive up to 18 hours of credit towards their Associate of Applied Science with an emphasis in Safety &

Hazardous Materials Management online. Contact the college at (479) 619-4142 for more information.

Accident Reporting, Investigation & Analysis ..............$395Applied Fire Safety, Protection & Analysis ...................$300Aviation Safety Management ........................................$75Blueprint Reading ...........................................................$150Construction General Permit Compliance ...................$77 Construction Stagegate Checklist ................................$77 Critical Thinking & Analysis ............................................$150Effective Briefing Techniques ........................................$75Effective Writing Techniques .........................................$75Hazard Communication GHS (Global Harmonization System)* ................................$75Hazardous Materials Transportation Awareness (DOT 101) ..$150 Hazardous Materials Triggers ........................................$77HAZWOPER Annual Refresher ......................................$195 HAZWOPER General Site Worker (Part 1) ....................$295Joint Commission Hospital Safety & Health Overview ...$150Laboratory Fire & Safety ................................................$150Legal Aspects of Safety ..................................................$195Motor Vehicle & Traffic Safety ........................................$395Occupational Health Issues ...........................................$150Operational Risk Management .....................................$150Psychology of Accident Prevention ..............................$75Quantitative Methods in Safety & Health Mgmt. ............$150Radiological Health & Safety Fundamentals ................$300Risk Communication .......................................................$150Safety & Health Committees & Councils ......................$75Safety & Health Incentives & Awards ............................$75Safety & Health Management & Safety Office Organization .....................................................$75Safety & Health Program Management (Full) ..................$300Safety & Health Program Management (Part 1) ...........$150Safety & Health Program Management (Part 2) ...........$150Safety Training & Educational Strategies .....................$150System Safety & Analysis ...............................................$375Tactical & Operational Safety ........................................$395

Online safety and health courses are available to allow

participants the opportunity to gain the training they need

without impacting their day-to-day obligations. Visit uta.

edu/ded and click on Online Courses to learn more and view

additional training available online.


*These course satisfy training prerequisites for the ATP 191. See page 15 for more information.

https://web-ded.uta.edu/wconnect/ace/online.asp

https://web-ded.uta.edu/wconnect/ace/online.asp


HAZARDOUS MATERIALS COURSES

HM 241 HAZWOPER General Site Worker 40-Hour40 Hours | $595 Contract | $10,000This course is designed to fulfill the training requirements for workers involved in hazardous waste cleanup/remediation at industrial sites, RCRA or Superfund sites, voluntary cleanup operations, and operations involving hazardous wastes listed within Title 29 CFR Part 1910.120(e). Topics include scope, application, and definitions; safety and health programs; site characterization and analysis; site control; training; medical surveillance; engineering controls, work practices, and personal protective equipment; monitoring; site safety and health plans; drums and containers; decontamination; and on-site emergencies.




Jan 15 - 19, 2018 Port Lavaca, TX

HM 241O Online HAZWOPER General Site Worker (Part I)32 Hours | $295 The online HAZWOPER course is designed to fulfill the basic training requirements for hazardous waste cleanup workers listed in Title 29 Code of Federal Regulations 1910.120(e), as well as workers involved in emergency response operations and those who deal with storage, disposal, or treatment of hazardous substances or uncontrolled hazardous waste. The topics covered include scope, application, and definitions; safety and health programs; site characterization and analysis; site control; training; medical surveillance; engineering controls, work practices, and personal protective equipment; monitoring; site safety and health plans; drums and containers; decontamination; and on-site emergencies. Participants must have additional training based upon OSHA Interpretation Letter [11/22/94] to complement this computer-based training. This training includes the donning, doffing, and use of specific Personal Protective Equipment (PPE) required where they work, as well as site-specific hands-on task training tailored to the participant’s assigned duties. The additional hands-on training can be obtained by scheduling or attending our eight-hour HM 241H course or can be accomplished by the employer.

HM 241H Onsite HAZWOPER General Site Worker (Part II)8 Hours | $295 Contract | $5,000The onsite HAZWOPER course is designed to fulfill the site-specific and hands-on training requirements, as described in OSHA Interpretation Letter dated 11/22/94. This training includes the donning, doffing, and use of specific Personal Protective Equipment (PPE) required as well as site-specific hands-on task training tailored to the participant’s assigned duties.

HM 242 HAZWOPER Annual Refresher8 Hours | $195 Contract | $3,000This course is a refresher training course for individuals currently trained as HAZWOPER General Site Workers, First Responder Awareness Level or First Responder Operations Level. This training is required within one (1) year of the initial 40-hour course completion and yearly thereafter. Topics reviewed include hazardous materials and associated risks, HAZMAT recognition and identification, the role of the awareness-level individual, site security and control, and the Emergency Response Guidebook. It discusses and reviews changes in federal and state regulations, as well as relevant, upcoming legislation. This course satisfies the annual refresher training requirements of Title 29 CFR Part 1910.120(e&q).

Sep 18, 2017 Houston, TX

Oct 2, 2017 Albuquerque, NM

Nov 27, 2017 Arlington, TX

Jan 15, 2018 Port Lavaca, TX


ONLINE TRAINING

HM 101 Trainer Course for Hazard Communication (GHS)8 Hours Contract | $5,000 HM 243 HAZWOPER Site Supervisor8 Hours Contract | $3,000

HM 244 HAZWOPER First Responder Awareness Level8 Hours Contract | $3,000

HM 245 HAZWOPER First Responder Operations Level24 Hours Contract | $7,000

Call 866.906.9190 or visit uta.edu/ded/osha for more information.

Contract Training


















https://web-ded.uta.edu/wconnect/CourseStatus.awp1?&Course=18HM242001%20%20&DirectFrom=Schedule&Origin=HM+242

































https://web-ded.uta.edu/wconnect/CourseStatus.awp?&Course=oshhom


SAFETY & HEALTH MANAGEMENT

SH 600 Workplace Violence: Prevention and Management12 Hours Contract | $5,000This course is designed to provide participants with the current OSHA definitions and guidelines related to workplace violence, as well as proactive preventive and management strategies. The program includes SAMA (Satori Alternatives to Managing Aggression) training in de-escalation techniques and simple ways to protect them from harm. This is an excellent opportunity for front-line employees, safety/security staff, and supervisors, to gain skills that support them in providing a safe and secure environment for themselves and their colleagues, and customers, clients, and patients.

SH 686 Safety & Health Management Systems (SHMS)40 Hours Contract | $8,000Through lecture, intense participant involvement, and demonstrations of learning, the course will provide participants with the opportunity to understand how effective SHMS are developed, implemented, and maintained. The course will demonstrate the benefits of implementing an SHMS and discuss the available consensus standards and international standards and guidelines highlighting their common elements. Participants will understand how SHMS can be implemented in a variety of industries, including manufacturing, construction, mining, healthcare, retail, trade and hospitality.

SH 710 Blueprint Reading8 Hours Contract | $3,000This course is designed to provide participants with basic instruction on blueprint reading so they can better understand various types of blueprints, shop prints and schematics used in both the industrial and construction environments. Participants learn to identify and interpret the different standards for symbols and abbreviations found on electrical construction drawings, schematics, and wiring diagrams. Participants will also learn fire safety and building code requirements and hazard identifications. They will also gain the skills and strengths to provide construction recommendations that will improve overall safety of the facility and the construction process.

SH 785 Root Cause Analysis16 Hours | $495 Contract | $7,000This workshop provides participants the basic skills necessary to conduct an effective accident investigation and determine the root causes of accidents. The course reviews basic accident investigation procedures and describes accident analysis techniques with emphasis on the use of Root Cause Analysis. Participants will use systems thinking and related tools and techniques to identify contributing and causal factors that underlie variations in performance associated with adverse events or close calls. The course integrates a number of different analyses methods using actual case studies to demonstrate their advantages, disadvantages, and applications.


SH 790 Lean Fundamentals for Safety: Hierarchy of Controls, 5S36 Hours | $695 Contract | $9,000This course provides hands-on practical experience applying lean principles to improve safety. Course material is presented in a “see–do” format over a five-day period. Topics include lean fundamentals, Hierarchy of Safety Controls, 5S, and practical safety reviews; training of kaizens and Total Productive Maintenance; and an introduction to Mistake Proofing (Poke-Yoke). Review of process improvement tools, visual management boards, and a post-event safety audit will also be conducted, as well as an exam covering controls, lean tools, and visual management.


SH 800 People Powered Safety: Applying Human Dynamics for Injury Prevention32 Hours Contract | $11,000This spirited, research-based training course will specify practical ways to facilitate the self-motivation needed to achieve and sustain a Total Safety Culture. This training extends and refines the content in behavior based safety by addressing the person-based factors to improve safety on the job. It focuses on thoughts and attitudes that can influence safe behavior, drawing on extensive research to discuss the psychology of safety before focusing on four key skills that promote safety: Acting, Coaching, Thinking, and Seeing.

SH 801 Enhancing Safety Performance with Behavioral Safety: Current Trends in BBS24 Hours | $895 Contract | $11,000This course is designed to provide participants with a thorough understanding of Behavior-Based Safety and begins with the evolution of BBS, including the underlying principles, common myths and half-truths. Emphasis is given to lessons learned from experience and research. Long-term goals for BBS are identified, along with proven steps organizations can take that lead to safety excellence. Participants will learn how to develop observation and feedback skills, how to use behavioral data to improve performance, ways to handle common barriers, and strategies to motivate employee safety performance. Current trends in BBS will be analyzed, including how to sustain a BBS process and keep it fresh. Case studies will be used to illustrate both successful implementations and lessons learned.




MASTERCERTIFICATION

MCMC

SAFETY & HEALTH

























https://web-ded.uta.edu/wconnect/CourseStatus.awp1?&Course=PRSH710%20%20%20%20%20&DirectFrom=Schedule&Origin=SH+710













https://web-ded.uta.edu/wconnect/CourseStatus.awp1?&Course=PRSH785














https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~osh800












https://web-ded.uta.edu/wconnect/CourseStatus.awp1?&Course=18SH801001%20%20&DirectFrom=Schedule&Origin=SH+801





















SH 810 Written Programs for Safety & Health Management40 Hours | $995 Contract | $12,000This course addresses the eight core elements of an effective safety and health system and those central issues that are critical to each element’s development, implementation, and proper management through the use of written material. The focus of this course is to develop the participant’s skills and knowledge in the development and implementation of a company’s safety and health management system, with emphasis on the written program documents required by OSHA. Using a hands-on approach, participants will have the opportunity to develop policies, procedures, and checklists that are required to effectively manage a safety and health management system.



SH 900 Leading Measures for Improving Safety24 Hours | $895 Contract | $11,000This advanced safety and health course is designed to provide participants with the skill and knowledge to identify key steps and develop implementation strategies for an organization to effectively apply leading measures for improving safety performance. Participants will gain enhanced skills for measuring and prioritizing organizational risks. The course will also address corporate success measures, reward, and recognition programs, and help participants identify potential pitfalls of performance measurement systems. The use of case studies, job safety analyses, and near-miss (near-hit) reports will be used to foster a practical application of a leading measure approach to improving safety performance.

Dec 5 - 7, 2017 Houston (North), TX

SH 910 Principles of Auditing24 Hours | $895 Contract | $11,000This course provides participants with the fundamental principles needed to conduct auditing activities related to regulatory compliance, contractual performance, and individual skills and knowledge. Participants will develop auditing skills, including planning, procedures, evaluation, and management. The course specifically addresses training audits, contractor performance audits, and compliance audits.




CSP/ASP/OHST Prep WorkshopsSH 960 Certified Safety Professional (CSP) Examination Preparation Workshop24 Hours | $595 Contract | $8,000This workshop will review essential information, answer questions, and use practice problems to address the domains of collection, assessment, and EHS management, as well as security risk information covered on the CSP exam. Topics will include concepts of probability, statistics, and basic sciences; safety, environmental, occupational health, and fire protection as they pertain to engineering; applied management principles, ergonomic analysis, and risk management; legal/regulatory issues; and Workers’ Compensation. A workbook will be provided.



SH 961 Associate Safety Professional (ASP) Examination Preparation Workshop24 Hours | $595 Contract | $8,000This workshop will review fundamentals in mathematics, physics, probability and statistics as well as use of a calculator for typical calculations that will be required. It will also review sample questions addressing the domains of mathematics; safety management systems; ergonomics; fire prevention and protection; occupational health; environmental management; training, education, and communication covered in the exam. Other topics will include the recognition, measurement, evaluation, and control of EHS hazards; EHS training and management; business principles, practices, and metrics in EHS; and ASP certification requirements and scoring procedures for test preparation. A workbook will be provided.



SH 963 Occupational Health and Safety Technologist Associate Safety Professional (OHST) Examination Preparation Workshop24 Hours | $595 Contract | $8,000This three-day workshop provides participants with a review of the potential areas that will be covered on the OHST certification examination. You will receive a list of recommended resources available to continue your preparation for the exam and review content information using a testing format. This workshop will review fundamentals in calculator, mathematics, statistics, chemistry, and physics; engineering technology; basic and applied sciences; law, regulations, and standards; control concepts; investigations; survey and inspection techniques; data computation and recordkeeping; and education, training, and instruction. A workbook will be provided.


MASTERCERTIFICATION

MCMC

SAFETY & HEALTH


https://web-ded.uta.edu/wconnect/CourseStatus.awp1?&Course=17SH810001%20%20&DirectFrom=Schedule&Origin=Extended+Listing











































































34 University of Texas at Arlington | OSHA Education Center wEvening Classesp Saturday Classes z Clases en español


SH 920 Process Safety Management (PSM)32 Hours | $995 Contract | $12,000Process Safety Management, or PSM, is an OSHA requirement for companies that use Highly Hazardous Chemicals (HHC) in their manufacturing processes. This course describes the procedures required by OSHA and instructs the participant in how to design a full implementation of a PSM program that addresses the hazardous issues and is compliant with the OSHA requirements.


SH 925 Management of Change20 Hours | $595 Contract | $8,000The management of change (MOC) is a control associated with industries covered by the Process Safety Management standard. Change is essential to a company’s productivity and needs to be managed. All industries can benefit operationally by implementing methods to manage changes to equipment, procedures, materials, and process conditions. This two-and-half-day course will present methods to identify, review approve, and implement changes within a management of change program through a series of exercises. After completing this course, participants will have tools to develop a management of change process.


SH 930 Project Management for EHS Professionals28 Hours | $995 Contract | $12,000Project Management is both an art and a science. This course introduces EHS professionals to the methodology, tools, and techniques needed to deliver successful projects. Participants will learn the fundamentals of the project management framework, consisting of project initiation, planning, execution, control, and closure. Through course exercises and scenarios, participants will build skills in assessing and managing stakeholders, identifying and controlling project scope, developing a Project Plan and other critical project documentation, managing risks, and building the project schedule and budget.

Aug 29 - Sep 1, 2017 Houston, TXApr 17 - 20, 2018 Arlington, TX

MS 901 Management System Design for EHS92 Hours | $2,895 Contract | $27,000This management system course provides participants the opportunity to design the core elements of a management system for environmental, risk, safety, and health programs. The goal of this course is to assist participants in the design and development of an effective management system through classroom instruction, case studies, and participant exercise activities. Participants must be available to attend all three sessions.

Houston, TX

Session 1: Jan 22 - 26, 2018

Session 2: Mar 6 - 9, 2018

Session 3: Apr 24 - 26, 2018

Arlington, TX

Session 1: May 14 - 18, 2018

Session 2: Jul 10 - 13, 2018

Session 3: Sep 4 - 6, 2018

MASTERCERTIFICATION

MCMC

SAFETY & HEALTH

MASTERCERTIFICATION

MCMC

SAFETY & HEALTH

































































RISK MANAGEMENT COURSESRM 101 Safety, Health, and Environmental Risk Management (SHERM) Principles32 Hours | $695 Contract | $9,000This course provides an overview of risk management from the safety, health, and environmental program perspective. Specific topics covered include introduction to risk management using ISO STD 31000, key terminology, describing and applying the risk management process, and suggested strategies for improving environmental, health, and safety (EHS) programs using risk management principles.




Oct 10 - 13, 2017 El Paso, TX

Oct 17 - 20, 2017 Dallas, TX

Nov 7 - 10, 2017 Port Lavaca, TX


Dec 12 - 15, 2017 San Antonio, TX






Jun 19 - 22, 2018 El Paso, TX


Jul 17 - 20, 2018 Austin, TX


RM 201 Assessment Techniques24 Hours | $895 Contract | $10,000This course provides participants with techniques used to prepare for and conduct assessments, identify issues, and the disposition of identified issues. Assessments are used to systematically gather information, which is analyzed against approved criteria to identify potential issues related to compliance, performance, and effectiveness.



RM 202 Performance Measurement and Data Analysis36 Hours Contract | $11,000In this course, participants gain the knowledge and skills necessary to establish, implement, and maintain an effective performance measurement system and to perform effective data analysis and trending.



RM 203 Risk Informed Decision Making24 Hours Contract | $12,000This course employs a combination of illustrated case studies, lectures, and individual and group exercises to introduce participants to the various facets, methodologies, tools, and practical applications of risk-informed decision making.



RM 601Intermediate Accident Investigation and Photography24 Hours | $595 Contract | $7,000This three-day course provides participants with instruction on accident investigation procedures and analysis techniques beyond the basic level. The goal of the course is to help participants gain the skills and knowledge necessary to conduct more effective workplace incident investigations. This course also includes a full day of instruction on the proper use of digital photography and its role in conducting investigations and documenting the scene of an incident.

Sep 19 - 21, 2017 Lafayette, LA





Jul 31 - Aug 3, 2018 Arlington, TX

RM 701 Advanced Accident Investigation32 Hours | $695 Contract | $9,000This four-day course presents advanced skills in conducting incident investigations that aid in determining the contributing factors to workplace injuries and fatalities. In particular, participants will learn how to develop a course of action to prevent future problems. Participants will also learn the importance of conducting a thorough investigation in a consistent manner that will, if necessary, stand up in court. Coursework includes lecture, in-class workshops, case studies, and out-of-class work.

Prerequisites: RM 601 Intermediate Accident Investigation and Photography


Nov 28 - Dec 1, 2017 Lafayette, LA





Accident Investigation certificateMASTER

CERTIFICATION

MCMC

SAFETY & HEALTH

MASTERCERTIFICATION

MCMC

RISKMANAGEMENT

MASTERCERTIFICATION

MCMC

RISKMANAGEMENT

MASTERCERTIFICATION

MCMC

RISKMANAGEMENT



https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~RM101






















































https://web-ded.uta.edu/wconnect/CourseStatus.awp1?&Course=18RM601001%20%20&DirectFrom=Schedule&Origin=RM+601

















https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~osg701

























ENVIRONMENTAL COURSES

AIR 201 Fundamentals of the Clean Air Act24 Hours | $750 Contract | $9,000The Clean Air Act (CAA) requires facilities to implement robust air emission control practices which are regulated and enforced through a complex permitting process. During this class, the instructor will give an overview of the most pertinent CAA requirement, including the New Source Review process, Title V permitting, Permit by Rule, and requirements for Hazardous Air Permitting. Through classroom activities, presentations, and discussions of compliance and enforcement activities, participants will gain an understanding of which requirements may apply to their facilities and the path to compliance.


Oct 2 - 4, 2017 Austin, TX

Oct 18 - 20, 2017 El Paso, TX




Jan 22 - 24, 2018 Oklahoma City, OK

Feb 19 - 21, 2018 Lake Charles, LA





Jul 16 - 18, 2018 Austin, TX

EPA Outreach ProgramETI 101 Introduction to Environmental Compliance32 Hours | $895 Contract | $11,000This course is designed to provide environment, safety, and health professionals the necessary tools to ensure workplace compliance with environmental regulations and reduce environmental risks. The course covers the basics of environmental regulations and demonstrates how to identify regulations pertinent to specific operations. The course also covers elements of major environmental programs at the state level and reviews enforcement and compliance tools by regulatory area. Activities and case studies will be used throughout the course to allow attendees to apply knowledge of the topics discussed.

Sep 12 - 15, 2017 Austin, TX




Oct 17 - 20, 2017 West Memphis, AR

Oct 24 - 27, 2017 Houston (South), TX


Nov 28 - Dec 1, 2017 El Paso, TX

Dec 5 - 8, 2017 Austin, TX



Feb 6 - 9, 2018 Lake Charles, LA






May 29 - Jun 1, 2018 Austin, TX

Jun 11 - 14, 2018 Houston (South), TX

Jun 26 - 29, 2018 Lake Charles, LA

ETI 501 EPA Outreach Trainer Course32 Hours | $695 Contract | $9,000Attendance and successful completion of this trainer course will provide the tools and the curriculum for attendees to teach the ETI 601 EPA 8-Hour Environmental Hazard Awareness course. During the course, EPA topics will be reviewed and training techniques presented in order to promote environmental awareness among workers and equip them to better protect human health and environmental resources.

Prerequisites: ETI 101 Introduction to Environmental Compliance and three years of environmental program experience.


Dec 5 - 8, 2017 Houston (South), TX

Mar 27 - 30, 2018 Lake Charles, LA


UTA EPA Outreach Trainers are able to

submit UTA EPA Outreach card requests

through the Outreach Portal.

For more information on using the Outreach Portal,

please contact our office:

866.906.9190 | [email protected]


wEvening Classesp Saturday Classes z Clases en español

https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~AIR201

https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~eti101



















































MGE 801 Environmental Management Systems32 Hours | $995 Contract | $12,000This updated course specifies general requirements and guidelines of the new ISO 14001:2015 environmental management system (EMS) standard. A fully implemented EMS will provide reasonable assurance of minimal negative environmental impact, improved environmental performance and sustainable growth. EMS can be used as a launching pad to move organizations towards sustainability through environmental source reduction, self-regulation and continuous improvement.

Sep 26 - 29, 2017 Lake Charles, LA



MGE 802 Pollution Prevention and Lean Principles24 Hours | $495 Contract | $6,000This course will provide you with the opportunity to improve the efficiency of your organization through the elimination of pollutants and the application of lean principles within an environmental management system. The first day will focus on how an EHS manager can transform their role as “EHS compliance officer” into a sustainability and profit manager. There will also be an overview of principles of lean operations that are equipped to improve the bottom line, reduce your regulatory burdens, and increase the overall efficiency of your organization. The next two (2) days will consist of an interactive workshop lead by experts in pollution prevention, environmental management systems (EMS), environmental regulations, and energy efficiency. The course will walk you through the process of composing a pollution prevention plan or renewing your pollution prevention plan to ensure you get the most from your efforts. Finally, participants in this course will integrate their lean and pollution prevention plan using detailed value stream mapping.



MGE 810 Environmental Audits24 Hours | $895 Contract | $11,000EH&S professionals will learn how to prepare for an environmental audit of their site by a regulatory agency, an ISO audit, or a corporate audit. This course will prepare your staff and management team for an audit, and use the audit findings and/or recommendations to improve facilities performance, and provide best practices to facilitate your organization’s team effectiveness and efficiencies.


Dec 13 - 15, 2017 Austin, TX


MGE 811 Environmental Law24 Hours | $750 Contract | $9,000Environmental and safety managers need a working knowledge of the laws regulating the operations of their businesses. They may be called upon to interpret regulations, collect and preserve evidence, or defend their employers’ practices. Employees have been found liable individually, and even charged criminally, pursuant to the environmental laws. This course assists environmental and safety managers in identifying legal issues, deepening their understanding of how the law intersects with work duties and responsibilities, and learning how best to protect themselves and their employers from claims and enforcement actions. To that end, this course surveys the broad range of federal, state, and local laws and agencies regulating the environmental impacts of company operations. The instructor’s experience in defending clients from enforcement proceedings, such as those brought by EPA, TCEQ, and OSHA, will provide real-world case histories illustrating how best to negotiate and defend a company from penalties.

Nov 8 - 10, 2017 Austin, TX





https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~MGE801




































































WTR 301 Introduction to Water and Wastewater Regulations24 Hours | $795 Contract | $10,000This course provides an introduction to the Clean Water Act (CWA) and the National Pollutant Discharge Elimination System (NPDES). Discussion topics include the NPDES permit types for storm water, industrial wastewater, domestic wastewater, and pre-treatment. Case studies and class activities will provide opportunities for participants to use knowledge gained during the course. The course will facilitate participants’ ability to attain and maintain compliance with applicable water and wastewater regulations, and to better understand how those regulations impact their organizations.

Sep 5 - 7, 2017 Austin, TX


Sep 27 - 29, 2017 Austin, TX



Nov 1 - 3, 2017 Houston (South), TX



Feb 6 - 8, 2018 Albuquerque, NM

Mar 13 - 15, 2018 Lake Charles, LA




WST 401 Resource Conservation and Recovery Act32 Hours | $895 Contract | $11,000This course explores rules and regulations governing the managing, storing, and shipping hazardous waste. Participants will learn about the Resource Conservation and Recovery Act (RCRA) and become familiar with a wide range of related federal, state, and local agencies and their requirements. The course will present the basics of managing non-hazardous waste, permitting processes, common violations, and waste minimization.




Oct 23 - 26, 2017 Austin, TX

Nov 14 - 17, 2017 West Memphis, AR

Nov 27 - 30, 2017 Austin, TX

Dec 11 - 14, 2017 Houston (South), TX



Apr 9 - 12, 2018 Lake Charles, LA



Jul 9 - 12, 2018 Oklahoma City, OK

ENVIRONMENTALTRAINING INSTITUTE

ETIETICONTACT [email protected]/ded/eti


uta.edu/ded/eti

https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~WTR301

























https://web-ded.uta.edu/wconnect/ShowSchedule.awp1?~~GROUP~WST401























uta.edu/ded/eti

866-906-9190 | uta.edu/ded 39wEvening Classesp Saturday Classes z Clases en españolwEvening Classesp Saturday Classes

SCHEDULE BY LOCATION

Albuquerque, NMOG 201 Aug 21, 2017

OG 200 Aug 22 - 24, 2017

OSHA #2264 Aug 29 - 31, 2017

OSHA #2225 Sep 5 - 8, 2017

OSHA #7115 Sep 11, 2017

OSHA #2045 Sep 12 - 15, 2017

OSHA #3115 Sep 19 - 21, 2017

WST 401 Sep 19 - 22, 2017

OSHA #502 Sep 25 - 27, 2017

OSHA #2055 Sep 26 - 28, 2017

OSHA #503 Sep 27 - 29, 2017

HM 242 Oct 2, 2017

HM 241 Oct 2 - 6, 2017

OSHA #3015 Oct 10 - 12, 2017

OSHA #511 Oct 17 - 20, 2017

SH 200 Oct 23 - 23, 2017

SH 201 Oct 24 - 25, 2017

SH 202 Oct 26 - 27, 2017

OSHA #510 Oct 31 - Nov 3, 2017

OSHA #3095 Nov 7 - 10, 2017

OSHA #501 Nov 14 - 17, 2017

AIR 201 Nov 15 - 17, 2017

OSHA #500 Nov 28 - Dec 1, 2017

OSHA #2264 Dec 19 - 21, 2017

OSHA #521 Feb 6 - 9, 2018

WTR 301 Feb 6 - 8, 2018

WST 401 Mar 5 - 8, 2018

RM 601 Mar 6 - 8, 2018

RM 701 Mar 13 - 16, 2018

OSHA #502 Mar 19 - 21, 2018

OSHA #510 Mar 20 - 23, 2018

OSHA #503 Mar 21 - 23, 2018

OSHA #2264 Mar 27 - 29, 2018

OSHA #2045 Apr 10 - 13, 2018

AIR 201 Apr 16 - 18, 2018

OSHA #511 Apr 17 - 20, 2018

RM 101 Apr 24 - 27, 2018

OSHA #3015 May 8 - 10, 2018

OSHA #502 Jun 4 - 6, 2018

OSHA #503 Jun 6 - 8, 2018

OSHA #2015 Jun 19 - 22, 2018

OSHA #3095 Jul 17 - 20, 2018

OSHA #510 Aug 7 - 10, 2018

OSHA #3115 Sep 4 - 6, 2018

OSHA #2255 Sep 18 - 20, 2018

Amarillo-Dumas, TXOSHA #510 Aug 22 - 25, 2017

OSHA #501 Aug 29 - Sep 1, 2017

OSHA #500 Sep 12 - 15, 2017

OSHA #2225 Oct 3 - 6, 2017

OSHA #2255 Oct 17 - 19, 2017

OSHA #511 Feb 20 - 23, 2018

OSHA #3095 Mar 27 - 30, 2018

OSHA #2264 Apr 24 - 26, 2018

OSHA #3115 May 29 - 31, 2018

OSHA #3015 Jun 19 - 21, 2018

OSHA #521 Aug 28 - 31, 2018

OSHA #510 Sep 18 - 21, 2018

Arlington, TXOSHA #3095 Aug 15 - 18, 2017

RM 101 Aug 15 - 18, 2017

OSHA #5810 Aug 22 - 25, 2017

OSHA #7105 Aug 28, 2017

OSHA #7845 Aug 28, 2017

OSHA #502 Aug 28 - 30, 2017

SH 810 Aug 28 - Sep 1, 2017

OSHA #511 Aug 29 - Sep 1, 2017

OSHA #503 Aug 30 - Sep 1, 2017

ATP 191 Sep 5 - 8, 2017

OSHA #500 Sep 5 - 8, 2017

AIR 201 Sep 6 - 8, 2017

OSHA #7100 Sep 11, 2017

OSHA #2015 Sep 12 - 15, 2017

OSHA #3115 Sep 12 - 14, 2017

MGE 810 Sep 13 - 15, 2017

wOSHA #7410 Sep 19, 2017

CPT 104 Sep 19 - 21, 2017

OSHA #2264 Sep 19 - 21, 2017

OSHA #3015 Sep 19 - 21, 2017

OSHA #510 Sep 19 - 22, 2017

wOSHA #7405 Sep 21, 2017

pOSHA #7115 Sep 23, 2017

wOSHA #510 Sep 25 - Oct 18, 2017

OSHA #511 Sep 26 - 29, 2017

OSHA #521 Sep 26 - 29, 2017

pOSHA #7505 Sep 30, 2017

SH 200 Oct 2, 2017

OSHA #500 Oct 3 - 6, 2017

SH 201 Oct 3 - 4, 2017

SH 960 Oct 3 - 5, 2017

WTR 301 Oct 4 - 6, 2017

SH 202 Oct 5 - 6, 2017

pOSHA #7005 Oct 7, 2017

OSHA #2045 Oct 10 - 13, 2017

OSHA #501 Oct 10 - 13, 2017

SH 300 Oct 10 - 12, 2017

OSHA #502 Oct 16 - 18, 2017

OSHA #510 Oct 17 - 20, 2017

LS 105A Oct 17 - 20, 2017

OSHA #503 Oct 18 - 20, 2017

wOSHA #511 Oct 23 - Nov 15, 2017

OSHA #3095 Oct 24 - 27, 2017

OSHA #2264 Oct 31 - Nov 2, 2017

RM 201 Oct 31 - Nov 2, 2017

OSHA #500 Oct 31 - Nov 3, 2017

SH 910 Oct 31 - Nov 2, 2017

OSHA #510 Nov 7 - 10, 2017

OSHA #511 Nov 7 - 10, 2017

OG 200 Nov 14 - 16, 2017

OSHA #3115 Nov 14 - 16, 2017

SH 961 Nov 14 - 16, 2017

OG 201 Nov 17, 2017

HM 242 Nov 27, 2017

HM 241 Nov 27 - Dec 1, 2017

OSHA #2225 Nov 28 - Dec 1, 2017

OSHA #510 Nov 28 - Dec 1, 2017

wOSHA #2255 Nov 28 - Dec 14, 2017

RM 202 Dec 4 - 8, 2017

OSHA #501 Dec 5 - 8, 2017



OSHA #510 Dec 5 - 8, 2017

AIR 201 Dec 5 - 7, 2017

MGE 802 Dec 5 - 7, 2017

OSHA #502 Dec 11 - 13, 2017

OSHA #3015 Dec 12 - 14, 2017

OSHA #500 Dec 12 - 15, 2017

MGE 801 Dec 12 - 15, 2017

OSHA #503 Dec 13 - 15, 2017

OSHA #2015 Dec 19 - 22, 2017

OSHA #2045 Dec 19 - 22, 2017

RM 101 Dec 19 - 22, 2017

SH 785 Dec 19 - 20, 2017

OSHA #502 Jan 8 - 10, 2018

OSHA #500 Jan 9 - 12, 2018

OSHA #511 Jan 9 - 12, 2018

OSHA #521 Jan 9 - 12, 2018

OSHA #503 Jan 10 - 12, 2018

OSHA #3085 Jan 16 - 18, 2018

OSHA #510 Jan 16 - 19, 2018

OSHA #501 Jan 16 - 19, 2018

wOSHA #2264 Jan 16 - Feb 1, 2018

WTR 301 Jan 17 - 19, 2018

OSHA #2255 Jan 23 - 25, 2018

SH 920 Jan 23 - 26, 2018

ATP 191 Jan 30 - Feb 2, 2018

OSHA #500 Jan 30 - Feb 2, 2018

RM 601 Jan 30 - Feb 2, 2018

wOSHA #3115 Feb 2 - 22, 2018

OSHA #502 Feb 5 - 7, 2018

OSHA #510 Feb 6 - 9, 2018

OSHA #511 Feb 6 - 9, 2018

OSHA #503 Feb 7 - 9, 2018

SH 200 Feb 12, 2018

WST 401 Feb 12 - 15, 2018

SH 201 Feb 13 - 14, 2018

SH 963 Feb 13 - 15, 2018

SH 202 Feb 15 - 16, 2018

OSHA #3115 Feb 20 - 22, 2018

RM 203 Feb 20 - 22, 2018

OSHA #521 Feb 20 - 23, 2018

OSHA #502 Feb 26 - 28, 2018

OSHA #2264 Feb 27 - Mar 1, 2018

OSHA #3095 Feb 27 - Mar 2, 2018

OSHA #510 Feb 27 - Mar 2, 2018

RM 701 Feb 27 - Mar 2, 2018

wOSHA #2015 Feb 27 - Mar 22, 2018

OSHA #503 Feb 28 - Mar 2, 2018

OSHA #500 Mar 6 - 9, 2018

OSHA #511 Mar 6 - 9, 2018

AIR 201 Mar 12 - 14, 2018

OSHA #501 Mar 12 - 15, 2018

RM 101 Mar 12 - 15, 2018

SH 801 Mar 13 - 15, 2018

MGE 811 Mar 14 - 16, 2018

OSHA #502 Mar 19 - 21, 2018

OSHA #3015 Mar 20 - 22, 2018

OSHA #510 Mar 20 - 23, 2018

OSHA #503 Mar 21 - 23, 2018

OSHA #2015 Mar 27 - 30, 2018

wOSHA #3015 Mar 27 - Apr 19, 2018

OSHA #2225 Apr 3 - 6, 2018

OSHA #500 Apr 3 - 6, 2018

SH 960 Apr 3 - 5, 2018

OSHA #502 Apr 9 - 11, 2018

OSHA #3115 Apr 10 - 12, 2018

OSHA #510 Apr 10 - 13, 2018

OSHA #521 Apr 10 - 13, 2018

OSHA #503 Apr 11 - 13, 2018

MGE 810 Apr 11 - 13, 2018

OSHA #2264 Apr 17 - 19, 2018

SH 930 Apr 17 - 20, 2018

OSHA #511 Apr 24 - 27, 2018

WTR 301 Apr 25 - 27, 2018

OSHA #3095 May 1 - 4, 2018

OSHA #501 May 1 - 4, 2018

wOSHA #521 May 1 - 24, 2018

pOSHA #7105 May 5, 2018

pOSHA #7845 May 5, 2018

OSHA #502 May 7 - 9, 2018

OSHA #500 May 8 - 11, 2018

OSHA #503 May 9 - 11, 2018

MS 901 (Session 1) May 14 - 18, 2018

OSHA #3115 May 15 - 17, 2017

OSHA #521 May 15 - 18, 2018

pOSHA #7300 May 19, 2018

OSHA #2045 May 22 - 25, 2018

OSHA #510 May 22 - 25, 2018

pOSHA #7400 May 26, 2018

OSHA #500 May 29 - Jun 1, 2018

OSHA #511 May 29 - Jun 1, 2018

SH 520 May 29 - 31, 2018

wOSHA #510 May 29 - Jun 21, 2018

OSHA #502 Jun 4 - 6, 2018

RM 101 Jun 5 - 8, 2018

OSHA #503 Jun 6 - 8, 2018

MGE 811 Jun 6 - 8, 2018

WST 401 Jun 11 - 14, 2018

OSHA #2264 Jun 12 - 14, 2018

OSHA #510 Jun 12 - 15, 2018

AIR 201 Jun 18 - 20, 2018

OSHA #2255 Jun 19 - 21, 2018

OSHA #511 Jun 19 - 22, 2018

SH 961 Jun 19 - 21, 2018

OSHA #502 Jun 25 - 27, 2018

SH 200 Jun 25, 2018

OSHA #3015 Jun 26 - 28, 2018

OSHA #3095 Jun 26 - 29, 2018

OSHA #500 Jun 26 - 29, 2018

SH 201 Jun 26 - 27, 2018

OSHA #503 Jun 27 - 29, 2018

SH 202 Jun 28 - 29, 2018

wOSHA #511 Jul 10 - Aug 2, 2018

OSHA #501 Jul 10 - 13, 2018

MS 901 (Session 2) Jul 10 - 13, 2018

OSHA #2015 Jul 10 - 13, 2018

OSHA #510 Jul 10 - 13, 2018

OSHA #502 Jul 16 - 18, 2018

OG 202 Jul 17 - 19, 2018

OSHA #3115 Jul 17 - 19, 2018

OSHA #521 Jul 17 - 20, 2018



OSHA #5810 Jul 17 - 20, 2018

OSHA #503 Jul 18 - 20, 2018

OSHA #500 Jul 24 - 27, 2018

OSHA #510 Jul 24 - 27, 2018

OSHA #511 Jul 24 - 27, 2018

ATP 191 Jul 31 - Aug 3, 2018

RM 601 Jul 31 - Aug 3, 2018

OSHA #502 Aug 6 - 8, 2018

OSHA #2045 Aug 7 - 10, 2018

OSHA #2264 Aug 7 - 9, 2018

OSHA #501 Aug 7 - 10, 2018

OSHA #503 Aug 8 - 10, 2018

OSHA #2055 Aug 14 - 16, 2018

OSHA #3085 Aug 14 - 16, 2018

OSHA #510 Aug 14 - 17, 2018

OSHA #500 Aug 21 - 24, 2018

OSHA #511 Aug 21 - 24, 2018

OSHA #502 Aug 27 - 29, 2018

OSHA #3115 Aug 28 - 31, 2018

RM 101 Aug 28 - 31, 2018

OSHA #503 Aug 29 - 31, 2018

MS 901 (Session 3) Sep 4 - 6, 2018

OSHA #3095 Sep 4 - 7, 2018

OSHA #510 Sep 4 - 7, 2018

OSHA #521 Sep 4 - 7, 2018

OSHA #2225 Sep 11 - 14, 2018

OSHA #502 Sep 17 - 19, 2018

OSHA #500 Sep 18 - 21, 2018

OSHA #511 Sep 18 - 21, 2018

OSHA #503 Sep 19 - 21, 2018

OSHA #3015 Sep 25 - 27, 2018

OSHA #501 Sep 25 - 28, 2018

OSHA #510 Sep 25 - 28, 2018

Austin, TXATP 191 Aug 15 - 18, 2017

OSHA #521 Sep 5 - 8, 2017

WTR 301 Sep 5 - 7, 2017

OSHA #2225 Sep 12 - 15, 2017

OSHA #2264 Sep 12 - 14, 2017

OSHA #3085 Sep 19 - 21, 2017

OSHA #3095 Sep 26 - 29, 2017

WTR 301 Sep 27 - 29, 2017

AIR 201 Oct 2 - 4, 2017

OSHA #3015 Oct 3 - 5, 2017

OSHA #511 Oct 10 - 13, 2017

SH 200 Oct 16, 2017

SH 201 Oct 17 - 18, 2017

SH 202 Oct 19 - 20, 2017

WST 401 Oct 23 - 26, 2017

SH 300 Oct 24 - 26, 2017

OSHA #501 Oct 31 - Nov 3, 2017

OSHA #521 Nov 7 - 10, 2017

MGE 811 Nov 8 - 10, 2017

OSHA #502 Nov 13 - 15, 2017

OSHA #503 Nov 15 - 17, 2017

WST 401 Nov 27 - 30, 2017

OSHA #3115 Nov 28 - 30, 2017

OSHA #510 Dec 5 - 8, 2017

CPT 103 Dec 12 - 14, 2017

SH 385O Dec 12 - 15, 2017

MGE 810 Dec 13 - 15, 2017

OSHA #3015 Dec 19 - 21, 2017

OSHA #2015 Jan 9 - 12, 2018

OSHA #502 Jan 22 - 24, 2018

OSHA #503 Jan 24 - 26, 2018

OSHA #3095 Feb 20 - 23, 2018

OSHA #511 Mar 6 - 9, 2018

OSHA #2264 Apr 3 - 5, 2018

OSHA #511 Apr 17 - 20, 2018

OSHA #3115 May 1 - 4, 2018

OSHA #501 May 1 - 4, 2018

OSHA #510 May 8 - 11, 2018

OSHA #502 May 14 - 16, 2018

OSHA #503 May 16 - 18, 2018

OSHA #3095 Jun 12 - 15, 2018

OSHA #500 Jul 10 - 13, 2018

OSHA #521 Jul 10 - 13, 2018

AIR 201 Jul 16 - 18, 2018

OSHA #3015 Jul 17 - 19, 2018

RM 101 Jul 17 - 20, 2018

OSHA #2045 Jul 24 - 27, 2018

OSHA #2015 Jul 31 - Aug 3, 2018

OSHA #2225 Aug 7 - 10, 2018

OSHA #2255 Aug 21 - 23, 2018

OSHA #510 Sep 11 - 14, 2018

Baton Rouge, LAOSHA #500 Aug 15 - 18, 2017

OSHA #7410 Sep 11, 2017

OSHA #3095 Sep 12 - 15, 2017

OSHA #510 Oct 3 - 6, 2017

OSHA #521 Oct 31 - Nov 3, 2017

OSHA #502 Nov 27 - 29, 2017

OSHA #503 Nov 29 - Dec 1, 2017

OSHA #511 Dec 5 - 8, 2017

OSHA #502 Feb 12 - 14, 2018

OSHA #503 Feb 14 - 16, 2018

OSHA #2225 Mar 27 - 30, 2018

OSHA #3015 Apr 3 - 5, 2018

OSHA #521 Apr 24 - 27, 2018

OSHA #2264 May 1 - 3, 2018

OSHA #3115 May 8 - 10, 2018

OSHA #511 May 22 - 25, 2018

OSHA #501 Jun 5 - 8, 2018

OSHA #2055 Jun 26 - 28, 2018

OSHA #510 Jul 17 - 20, 2018

OSHA #502 Sep 10 - 12, 2018

OSHA #503 Sep 12 - 14, 2018

Beaumont, TXOSHA #7845 Aug 21, 2017

OSHA #511 Aug 22 - 25, 2017

OSHA #7505 Sep 22, 2017

OSHA #5810 Oct 24 - 27, 2017

OSHA #2015 Nov 28 - Dec 1, 2017

OSHA #5810 Dec 11 - 14, 2017

OSHA #511 Dec 12 - 15, 2017

OSHA #5410 Jul 16 - 20, 2018

OSHA #5400 Aug 6 - 10, 2018

OSHA #5402 Sep 11 - 13, 2018




Bentonville, AROSHA #2045 Aug 14 - 17, 2017

OSHA #7300 Sep 11, 2017

OSHA #2055 Sep 12 - 14, 2017

OSHA #502 Oct 9 - 11, 2017

OSHA #503 Oct 11 - 13, 2017

OSHA #3095 Nov 28 - Dec 1, 2017

OSHA #2255 Dec 5 - 7, 2017

OSHA #511 Dec 19 - 22, 2017

OSHA #510 Jan 15 - 18, 2018

OSHA #521 Feb 13 - 16, 2018

OSHA #511 Mar 6 - 9, 2018

OSHA #500 Apr 24 - 27, 2018

OSHA #501 May 15 - 18, 2018

OSHA #2264 Jun 19 - 21, 2018

OSHA #2015 Jul 16 - 19, 2018

OSHA #502 Aug 27 - 29, 2018

OSHA #503 Aug 29 - 31, 2018

OSHA #2045 Sep 18 - 21, 20187

Corpus Christi, TXOSHA #521 Sep 12 - 15, 2017

OSHA #510 Oct 24 - 27, 2017

OSHA #3015 Nov 14 - 16, 2017

OSHA #501 Dec 5 - 8, 2017

OSHA #510 Dec 19 - 22, 2017

OSHA #511 Feb 6 - 9, 2018

OSHA #2264 Mar 13 - 15, 2018

OSHA #2015 Apr 3 - 6, 2018

OSHA #3115 May 1 - 3, 2018

OSHA #510 May 29 - Jun 1, 2018

OSHA #2225 Jul 10 - 13, 2018

OSHA #511 Aug 21 - 24, 2018

OSHA #501 Sep 18 - 21, 2018

Dallas, TXRM 101 Oct 17 - 20, 2017

OSHA #521 Nov 14 - 16, 2017

OSHA #511 Dec 12 - 15, 2017

OSHA #510 Dec 19 - 22, 2017

OSHA #3115 Jan 9 - 11, 2018

OSHA #2055 Feb 13 - 15, 2018

OSHA #510 May 1 - 4, 2018

El Paso, TXOSHA #2015 Aug 22 - 25, 2017

OSHA #502 Sep 5 - 7, 2017

OSHA #503 Sep 7 - 9, 2017

OSHA #2264 Sep 12 - 14, 2017

OSHA #511 Sep 19 - 22, 2017

OSHA #510 Oct 3 - 6, 2017

RM 101 Oct 10 - 13, 2017

AIR 201 Oct 18 - 20, 2017

OSHA #2225 Oct 24 - 27, 2017

OSHA #501 Nov 7 - 10, 2017

CPT 102 Dec 5 - 7, 2017

OSHA #3115 Jan 16 - 18, 2018

OSHA #3015 Jan 23 - 25, 2018

OSHA #521 Jan 30 - Feb 2, 2018

OSHA #3095 Feb 6 - 9, 2018

OSHA #2045 Feb 20 - 23, 2018

SH 385O Mar 13 - 16, 2018

OSHA #2015 Mar 20 - 23, 2018

OSHA #511 Apr 3 - 6, 2018

OSHA #2225 Apr 24 - 27, 2018

OSHA #510 May 1 - 4, 2018

OSHA #501 May 8 - 11, 2018

OSHA #500 Jun 5 - 8, 2018

RM 101 Jun 19 - 22, 2018

OSHA #2264 Jun 26 - 28, 2018

OSHA #3115 Jul 10 - 12, 2018

OSHA #3015 Jul 24 - 26, 2018

OSHA #3095 Aug 14 - 17, 2018

Farmington, NMOSHA #511 Aug 22 - 25, 2017

OSHA #2264 Oct 24 - 26, 2017

OSHA #2015 Feb 27 - Mar 1, 2018

OSHA #3095 Apr 3 - 6, 2018

OSHA #3015 Aug 7 - 9, 2018

Hot Springs, AROSHA #510 Feb 20 - 23, 2018

OSHA #500 Feb 27 - Mar 2, 2018

OSHA #2264 Aug 21 - 23, 2018

Houston (Central), TXOSHA #510 Aug 14 - 17, 2017

OSHA #511 Aug 14 - 17, 2017

OSHA #501 Aug 21 - 24, 2017

CPT 103 Aug 22 - 24, 2017

OSHA #3015 Aug 22 - 24, 2017

zOSHA #3085 Aug 28 - 30, 2017

OSHA #500 Aug 28 - 31, 2017

RM 101 Aug 28 - 31, 2017

SH 930 Aug 29 - Sep 1, 2017

OSHA #7410 Sep 1, 2017

OSHA #2264 Sep 5 - 7, 2017

OSHA #2015 Sep 11 - 14, 2017

OSHA #2045 Sep 11 - 14, 2017

WST 401 Sep 11 - 14, 2017

WTR 301 Sep 13 - 15, 2017

HM 242 Sep 18, 2017

HM 241 Sep 18 - 22, 2017

zOSHA #3115 Sep 18 - 20, 2017

OSHA #502 Sep 18 - 20, 2017

OSHA #510 Sep 18 - 21, 2017

OSHA #503 Sep 20 - 22, 2017

OSHA #500 Sep 25 - 28, 2017

OSHA #3115 Sep 26 - 28, 2017

OSHA #511 Oct 2 - 5, 2017

CPT 104 Oct 3 - 5, 2017

OSHA #2055 Oct 3 - 5, 2017

OSHA #521 Oct 3 - 6, 2017

OSHA #510 Oct 9 - 12, 2017

ATP 191 Oct 10 - 13, 2017

OSHA #2264 Oct 10 - 12, 2017

WTR 301 Oct 11 - 13, 2017

OSHA #501 Oct 16 - 19, 2017

WST 401 Oct 16 - 19, 2017

SH 300 Oct 17 - 19, 2017




OSHA #500 Oct 23 - 26, 2017

OSHA #3015 Oct 24 - 26, 2017

OSHA #510 Oct 24 - 27, 2017

DR 660 Oct 30 - Nov 2, 2017

OSHA #502 Oct 30 - Nov 1, 2017

pOSHA #510 Oct 30 - Nov 9, 2017

OSHA #2255 Oct 31 - Nov 2, 2017

OSHA #503 Nov 1 - 3, 2017

OSHA #2225 Nov 6 - 9, 2017

SH 201 Nov 6 - 7, 2017

AIR 201 Nov 6 - 8, 2017

OSHA #500 Nov 7 - 10, 2017

SH 202 Nov 8 - 9, 2017

OSHA #510 Nov 13 - 16, 2017

OSHA #2045 Nov 14 - 17, 2017

OSHA #2264 Nov 14 - 16, 2017

RM 101 Nov 14 - 17, 2017

MGE 802 Nov 14 - 16, 2017

OSHA #500 Nov 27 - 30, 2017

OSHA #511 Nov 27 - 30, 2017

SH 925 Nov 28 - 30, 2017

OSHA #2015 Dec 4 - 7, 2017

OSHA #3095 Dec 4 - 7, 2017

OSHA #3115 Dec 5 - 7, 2017

OSHA #501 Dec 11 - 14, 2017

OSHA #510 Dec 11 - 14, 2017

WTR 301 Dec 13 - 15, 2017

OSHA #500 Dec 18 - 21, 2017

OSHA #511 Dec 18 - 21, 2017

OSHA #521 Dec 18 - 21, 2017

SH 790 Dec 18 - 22, 2017

SH 801 Dec 19 - 21, 2017

OSHA #502 Jan 8 - 10, 2018

OSHA #510 Jan 8 - 11, 2018

OSHA #503 Jan 10 - 12, 2018

MS 901 (Session 1) Jan 22 - 26, 2018

OSHA #500 Jan 22 - 25, 2018

OSHA #501 Jan 22 - 25, 2018

OSHA #502 Jan 29 - 31, 2018

OSHA #510 Jan 29 - Feb 1, 2018

OSHA #3015 Jan 30 - Feb 1, 2018

OSHA #503 Jan 31 - Feb 2, 2018

pOSHA #511 Feb 5 - 15, 2018

OSHA #3115 Feb 6 - 8, 2018

OSHA #385O Feb 6 - 8, 2018

OSHA #2045 Feb 12 - 15, 2018

OSHA #3095 Feb 12 - 15, 2018

OSHA #511 Feb 12 - 15, 2018

OSHA #502 Feb 19 - 21, 2018

OSHA #2264 Feb 20 - 22, 2018

RM 601 Feb 20 - 22, 2018

OSHA #503 Feb 21 - 23, 2018

OSHA #2015 Feb 26 - Mar 1, 2018

OSHA #510 Feb 26 - Mar 1, 2018

OSHA #500 Mar 5 - 8, 2018

OSHA #521 Mar 5 - 8, 2018

MS 901 (Session 2) Mar 6 - 9, 2018

OSHA #501 Mar 12 - 15, 2018

OSHA #502 Mar 12 - 14, 2018

OSHA #511 Mar 12 - 15, 2018

OSHA #503 Mar 14 - 16, 2018

RM 701 Mar 19 - 22, 2018

OSHA #3085 Mar 26 - 28, 2018

OSHA #510 Mar 26 - 29, 2018

OSHA #502 Apr 2 - 4, 2018

OSHA #521 Apr 2 - 5, 2018

MGE 801 Apr 3 - 6, 2018

OSHA #503 Apr 4 - 6, 2018

OSHA #500 Apr 9 - 12, 2018

OSHA #511 Apr 9 - 12, 2018

ATP 191 Apr 16 - 19, 2018

OSHA #3115 Apr 16 - 18, 2018

OSHA #3095 Apr 23 - 26, 2018

OSHA #510 Apr 23 - 26, 2018

MS 901 (Session 3) Apr 24 - 26, 2018

OSHA #501 Apr 30 - May 3, 2018

OSHA #502 Apr 30 - May 2, 2018

OSHA #511 Apr 30 - May 3, 2018

OSHA #2055 May 1 - 3, 2018

OSHA #503 May 2 - 4, 2018

OSHA #2225 May 7 - 10, 2018

RM 101 May 7 - 10, 2018

pOSHA #3115 May 8 - 17, 2018

OSHA #2045 May 14 - 17, 2018

OSHA #510 May 14 - 17, 2018

OSHA #2255 May 21 - 23, 2018

OSHA #500 May 21 - 24, 2018

OSHA #502 May 21 - 23, 2018

OSHA #521 May 21 - 24, 2018

AIR 201 May 21 - 23, 2018

WST 401 May 21 - 24, 2018

RM 201 May 22 - 24, 2018

OSHA #503 May 23 - 25, 2018

OSHA #2264 May 29 - 31, 2018

OSHA #3015 May 29 - 31, 2018

SH 520 May 29 - 31, 2018

OG 202 Jun 5 - 7, 2018

zOSHA #510 Jun 16 - 19, 2018

OSHA #2015 Jun 11 - 14, 2018

OSHA #3115 Jun 11 - 13, 2018

OSHA #502 Jun 11 - 13, 2018

OSHA #510 Jun 11 - 14, 2018

OSHA #501 Jun 12 - 15, 2018

OSHA #503 Jun 13 - 15, 2018

OSHA #500 Jun 18 - 21, 2018

RM 202 Jun 18 - 22, 2018

OSHA #511 Jun 25 - 28, 2018

OSHA #521 Jun 25 - 28, 2018

OSHA #3095 Jul 9 - 12, 2018

OSHA #502 Jul 9 - 11, 2018

OSHA #510 Jul 9 - 12, 2018

OSHA #503 Jul 11 - 13, 2018

OSHA #511 Jul 16 - 19, 2018

RM 203 Jul 24 - 26, 2018

RM 601 Jul 24 - 26, 2018

OSHA #500 Jul 30 - Aug 2, 2018

OSHA #502 Jul 30 - Aug 1, 2018

OSHA #501 Jul 30 - Aug 2, 2018

zOSHA #500 Jul 30 - Aug 2, 2018

OSHA #503 Aug 1 - 3, 2018



OSHA #510 Aug 6 - 9, 2018

OSHA #3115 Aug 7 - 9, 2018

OSHA #511 Aug 13 - 16, 2018

RM 701 Aug 13 - 16, 2018

OSHA #521 Aug 13 - 16, 2018

OSHA #502 Aug 20 - 22, 2018

OSHA #2045 Aug 21 - 24, 2018

OSHA #503 Aug 22 - 24, 2018

CPT 106 Aug 24 - 26, 2018

OSHA #510 Aug 27 - 30, 2018

SH 810 Aug 27 - 31, 2018

OSHA #500 Sep 3 - 6, 2018

OSHA #511 Sep 3 - 6, 2018

OSHA #2264 Sep 4 - 6, 2018

OSHA #502 Sep 10 - 12, 2018

OSHA #521 Sep 10 - 13, 2018

OSHA #503 Sep 12 - 14, 2018

OSHA #501 Sep 17 - 20, 2018

OSHA #2015 Sep 17 - 20, 2018

OSHA #3095 Sep 17 - 20, 2018

OSHA #3015 Sep 18 - 20, 2018

OSHA #510 Sep 24 - 27, 2018

SH 910 Sep 25 - 27, 2018

Houston (North), TXOSHA #5600 Sep 5 - 8, 2017

OSHA #5602 Sep 8, 2017

OSHA #3095 Sep 18 - 21, 2017

OSHA #511 Oct 30 - Nov 2, 2017

OG 200 Dec 5 - 7, 2017

SH 900 Dec 5 - 7, 2017

OG 201 Dec 8, 2017

Houston (South), TXOSHA #510 Aug 8 - 11, 2017

CPT 104 Aug 15 - 17, 2017

OSHA #511 Aug 15 - 17, 2017

OSHA #510 Sep 5 - 8, 2017

OSHA #7500 Sep 8, 2017

OSHA #500 Sep 12 - 15, 2017

LS 101 Sep 12 - 15, 2017

OSHA #501 Oct 24 - 27, 2017

WTR 301 Nov 1 - 3, 2017

OSHA #2264 Nov 28 - 30, 2017

WST 401 Dec 11 - 14, 2017

OSHA #5410 Jan 8 - 12, 2018

OSHA #511 Jan 15 - 18, 2018

OSHA #521 Jan 15 - 18, 2018

OSHA #5400 Feb 12 - 16, 2018

OSHA #5402 Mar 20 - 22, 2018

OSHA #5810 Apr 24 - 27, 2018

SH 200 May 14, 2018

SH 201 May 15 - 16, 2018

WTR 301 May 15 - 17, 2018

SH 202 May 17 - 18, 2018

OSHA #511 May 29 - Jun 1, 2018

Kilgore, TXOSHA #500 Sep 5 - 8, 2017

OSHA #5810 Oct 10 - 13, 2017

OSHA #521 Dec 5 - 7, 2017

OSHA #2264 Dec 12 - 14, 2017

OSHA #511 Jan 24 - 27, 2018

OG 202 Mar 20 - 21, 2018

OSHA #2045 May 1 - 4, 2018

OSHA #3095 May 29 - Jun 1, 2018

OSHA #510 Aug 21 - 24, 2018

Lafayette, LAOSHA #3115 Aug 15 - 17, 2017

RM 601 Sep 19 - 21, 2017

OSHA #2264 Sep 26 - 28, 2017

OSHA #2015 Oct 24 - 27, 2017

RM 701 Nov 28 - Dec 1, 2017

OSHA #2045 Dec 12 - 15, 2017

OSHA #511 Aug 14 - 17, 2018

OSHA #521 Sep 25 - 28, 2018

Lake Charles, LAOSHA #511 Sep 26 - 29, 2017

MGE 801 Sep 26 - 29, 2017

OSHA #501 Oct 24 - 27, 2017

AIR 201 Feb 19 - 21, 2018

WTR 301 Mar 13 - 15, 2018

WST 401 Apr 9 - 12, 2018

Las Cruces, NMOSHA #3015 Nov 28 - 30, 2017

OSHA #511 Feb 13 - 16, 2018

OSHA #510 May 15 - 18, 2018

SH 385O Jul 31 - Aug 2, 2018

OSHA #2045 Aug 28 - 31, 2018

Little Rock, AROSHA #501 Sep 19 - 22, 2017

OSHA #2264 Nov 7 - 9, 2017

OSHA #3095 Jan 30 - Feb 2, 2018

OSHA #3015 Feb 6 - 8, 2018

OSHA #3115 Mar 6 - 8, 2018

OSHA #502 Mar 26 - 28, 2018

OSHA #503 Mar 28 - 30, 2018

OSHA #2045 Apr 17 - 20, 2018

OSHA #510 May 29 - Jun 1, 2018

OSHA #521 Jun 5 - May 8, 2018

OSHA #511 Jul 24 - 27, 2018

OSHA #500 Jul 31 - Aug 3, 2018

OSHA #501 Sep 4 - 7, 2018

Mesquite, TXOSHA #2055 Aug 15 - 17, 2017

OSHA #510 Aug 22 - 25, 2017

OSHA #2264 Dec 19 - 21, 2017

OSHA #3095 Jan 9 - 12, 2018

OSHA #2045 Mar 6 - 9, 2018

OSHA #511 Apr 3 - 6, 2018

Midland, TXOSHA #521 Oct 17 - 20, 2017

OSHA #5810 Jan 30 - Feb 2, 2018




Monroe, LAOSHA #2264 Jan 16 - 18, 2018

OSHA #510 Apr 3 - 6, 2018

OSHA #500 May 29 - Jun 1, 2018

New Orleans, LAOSHA #3015 Sep 12 - 14, 2017

SH 200 Sep 25, 2017

SH 201 Sep 26 - 27, 2017

SH 202 Sep 28 - 29, 2017

OSHA #2225 Oct 24 - 27, 2017

ATP 191 Nov 7 - 10, 2017

OSHA #3115 Dec 19 - 21, 2017

OSHA #521 Jan 23 - 26, 2018

OSHA #510 Feb 20 - 23, 2018

OSHA #511 Feb 27 - Mar 2, 2018

OSHA #3095 Mar 6 - 9, 2018

OSHA #500 Mar 27 - 30, 2018

OSHA #5410 Apr 9 - 13, 2018

OSHA #502 Apr 16 - 18, 2018

OSHA #503 Apr 18 - 20, 2018

OSHA #5400 Apr 30 - May 4, 2018

OSHA #2255 May 8 - 10, 2018

OSHA #2015 May 15 - 25, 2018

OSHA #2045 Jun 5 - 8, 2018

OSHA #5402 Jun 12 - 14, 2018

OSHA #521 Jul 31 - Aug 3, 2018

Oklahoma City, OKOSHA #2015 Aug 15 - 18, 2017

OSHA #3115 Aug 29 - 31, 2017

OSHA #2264 Sep 5 - 7, 2017

RM 701 Sep 5 - 8, 2017

OSHA #7105 Sep 8, 2017

OSHA #7845 Sep 8, 2017

OSHA #510 Sep 12 - 15, 2017

RM 101 Sep 26 - 29, 2017

OSHA #521 Oct 10 - 13, 2017

OSHA #2264 Oct 17 - 19, 2017

OSHA #2045 Oct 23 - 26, 2017

OSHA #3115 Oct 31 - Nov 2, 2017

OSHA #2255 Nov 7 - 10, 2017

OSHA #3015 Nov 7 - 9, 2017

OSHA #500 Nov 14 - 17, 2017

OSHA #3095 Nov 28 - Dec 1, 2017

OSHA #500 Dec 5 - 8, 2017

OSHA #510 Dec 5 - 8, 2017

OSHA #2225 Dec 12 - 15, 2017

OSHA #501 Dec 19 - 22, 2017

AIR 201 Jan 22 - 24, 2018

OSHA #511 Feb 6 - 9, 2018

OSHA #521 Feb 27 - Mar 2, 2018

OSHA #2015 Mar 13 - 16, 2018

OSHA #3115 Mar 20 - 22, 2018

OSHA #3015 Mar 27 - 29, 2018

OSHA #3095 Apr 17 - 20, 2018

OSHA #511 Apr 24 - 27, 2018

OSHA #501 May 15 - 18, 2018

OSHA #510 May 22 - 25, 2018

OSHA #2225 Jun 5 - 8, 2018

WTR 301 Jun 13 - 15, 2018

OSHA #502 Jun 18 - 20, 2018

OSHA #503 Jun 20 - 22, 2018

RM 101 Jun 26 - 29, 2018

WST 401 Jul 9 - 12, 2018

OSHA #2045 Jul 10 - 13, 2018

OSHA #2264 Jul 24 - 26, 2018

OSHA #510 Aug 7 - 10, 2018

OSHA #3115 Aug 14 - 16, 2018

OSHA #500 Aug 28 - 31, 2018

OG 202 Sep 4 - 6, 2018

Port Lavaca, TXOSHA #2264 Aug 22 - 24, 2017

OSHA #3095 Aug 29 - Sep 1, 2017

OSHA #510 Sep 26 - 29, 2017

RM 101 Nov 7 - 10, 2017

HM 241 Jan 15 - 19, 2018

HM 242 Jan 15, 2018

OSHA #502 Jan 29 - 31, 2018

OSHA #503 Jan 31 - Feb 2, 2018

OSHA #2045 Mar 20 - 23, 2018

OSHA #510 Apr 10 - 13, 2018

OSHA #511 May 8 - 11, 2018

OSHA #501 Jun 26 - 29, 2018

OSHA #2264 Jul 31 - Aug 2, 2018

OSHA #3095 Sep 11 - 14, 2018

San Antonio, TXOSHA #501 Aug 15 - 18, 2017

OSHA #2255 Aug 22 - 24, 2017

OSHA #3115 Sep 5 - 7, 2017

OSHA #7410 Sep 8, 2017

OSHA #510 Sep 26 - 29, 2017

OSHA #500 Oct 17 - 20, 2017

OG 200 Oct 24 - 26, 2017

OG 201 Oct 27 - 27, 2017

OSHA #2045 Nov 7 - 10, 2017

OSHA #2015 Nov 28 - Dec 1, 2017

OSHA #2264 Dec 12 - 14, 2017

RM 101 Dec 12 - 15, 2017

OSHA #2225 Jan 16 - 19, 2018

OSHA #3115 Jan 23 - 25, 2018

OSHA #511 Jan 30 - Feb 2, 2018

OSHA #502 Feb 12 - 14, 2018

OSHA #510 Feb 13 - 16, 2018

OSHA #503 Feb 14 - 16, 2018

OSHA #2045 Feb 20 - 23, 2018

OSHA #3095 Apr 10 - 13, 2018

OSHA #501 Apr 17 - 20, 2018

OSHA #3015 Apr 24 - 26, 2018

zOSHA #3115 May 22 - 24, 2018

zOSHA #3085 May 29 - 31, 2018

zOSHA #510 Jun 5 - 8, 2018

OSHA #510 Jun 12 - 15, 2018

OSHA #511 Jun 12 - 15, 2018

zOSHA #500 Jun 26 - 29, 2018

OSHA #2264 Jul 10 - 12, 2018

OSHA #502 Jul 16 - 18, 2018

OSHA #503 Jul 18 - 20, 2018



OSHA #3115 Jul 24 - 26, 2018

OSHA #2015 Aug 14 - 17, 2018

OSHA #500 Sep 4 - 7, 2018

Shreveport, LAOSHA #511 Sep 5 - 8, 2017

OSHA #2015 Sep 19 - 22, 2017

OSHA #502 Oct 2 - 5, 2017

OSHA #503 Oct 4 - 6, 2017

OSHA #510 Oct 10 - 13, 2017

OSHA #500 Nov 7 - 10, 2017

OSHA #2255 Mar 13 - 15, 2018

OSHA #521 Mar 20 - 23, 2018

OSHA #502 Mar 26 - 28, 2018

OSHA #503 Mar 28 - 30, 2018

OSHA #2264 May 8 - 10, 2018

OSHA #3115 Apr 3 - 5, 2018

OSHA #3015 Jun 5 - 7, 2018

OSHA #3095 Jul 24 - 27, 2018

OSHA #511 Jul 31 - Aug 3, 2018

OSHA #510 Aug 14 - 17, 2018

OSHA #500 Sep 25 - 28, 2018

Tulsa, OKOSHA #510 Aug 15 - 18, 2017

SH 300 Sep 19 - 21, 2017

OSHA #511 Nov 14 - 17, 2017

OSHA #510 Feb 20 - Apr 23, 2018

OSHA #2264 Mar 6 - 8, 2018

OSHA #2045 Mar 12 - 15, 2018

OSHA #502 Mar 26 - 28, 2018

OSHA #503 Mar 28 - 30, 2018

OSHA #500 Apr 17 - 20, 2018

OSHA #521 Jun 19 - 22, 2018

OSHA #2255 Jul 17 - 20, 2018

OSHA #511 Jul 24 - 27, 2018

OSHA #3015 Aug 21 - 24, 2018

OSHA #3095 Aug 28 - Sep 1, 2018

OSHA #2015 Sep 25 - 28, 2018

West Memphis, AROSHA #502 Aug 21 - 23, 2017

OSHA #503 Aug 23 - 25, 2017

OSHA #521 Sep 19 - 22, 2017

OSHA #511 Oct 24 - 27, 2017

OSHA #510 Nov 14 - 17, 2017

WST 401 Nov 14 - 17, 2017

OSHA #500 Jan 16 - 19, 2018

OSHA #2225 Feb 27 - Mar 2, 2018

OSHA #511 Mar 13 - 16, 2018

OSHA #2264 Apr 10 - 12, 2018

OSHA #3095 May 22 - 25, 2018

OSHA #3115 Jul 31 - Aug 2, 2018

Evening Classes


Arlington, TexasOSHA #7410 Sep 19, 2017

OSHA #7405 Sep 21, 2017

OSHA #510 Sep 25 - Oct 18, 2017

OSHA #511 Oct 23 - Nov 15, 2017

OSHA #2255 Nov 28 - Dec 14, 2017

OSHA #2264 Jan 16 - Feb 1, 2018

OSHA #3115 Feb 6 - 22, 2018

OSHA #2015 Feb 27 - Mar 22, 2018

OSHA #3015 Mar 27 - Apr 19, 2018

OSHA #521 May 1 - 24, 2018

OSHA #510 May 29 - Jun 21, 2018

OSHA #511 Jul 10 - Aug 2, 2018

Houston, TexasOSHA #510 Oct 30 - Nov 9, 2017

OSHA #511 Feb 5 - 15, 2018

OSHA #3115 May 8 - 17, 2018

Arlington, TexasOSHA #7115 Sep 23, 2017

OSHA #7505 Sep 30, 2017

OSHA #7005 Oct 7, 2017

OSHA #7105 May 5, 2018

OSHA #7845 May 5, 2018

OSHA #7300 May 19, 2018

OSHA #7400 May 26, 2018

Saturday Classes

https://web-ded.uta.edu/wconnect/ace/ShowSchedule.awp1?~~GROUP~OSHANT

CANCELLATIONSThe University of Texas at Arlington reserves the right to change or cancel any class. In the event that a class must be changed or cancelled, you will be notified by email and/or phone. You are required to provide a valid email address and phone number to ensure notification. The decision to cancel a class due to insufficient enrollment will be made approximately 1-2 business days prior to the class start date.

If a course is cancelled by UTA, participants have the option to transfer to another course, have their funds held in escrow, or receive a refund. No fees will be charged for these transactions if UTA cancels a class.

STUDENT WITHDRAWAL AND TRANSFER POLICYIf a participant withdraws from a class more than two (2) full business days before the class, they may transfer to another class at no charge; hold fees in escrow up to one year at no charge; or refund their course fee less a $35 processing charge for fees less than $1,000, or 5% of fees over $1,000.

If a participant withdraws from a class later than two (2) business days prior to the class start date, the fees are non-refundable. They may transfer to another class at no charge or hold the fees in escrow at no charge.

All participant withdrawal requests must be received via telephone, Monday-Friday during normal business hours.

TEXTBOOKSAll course materials will be provided by UTA unless otherwise indicated. Additional Codes of Federal Regulations (CFRs) may be purchased by contacting our office. A minimum purchase amount of $200 is required.

ACCOMMODATIONSThe Division for Enterprise Development is dedicated to providing equal educational opportunities to all qualified course participants. Contact [email protected] or call 866-906-9190 for information regarding special accommodations.

TITLE IX POLICYThe University of Texas at Arlington does not discriminate on the basis of race, color, national origin, religion, age, gender, sexual orientation, disabilities, genetic information, and/or veteran status in its educational programs or activities it operates. For more information, visit uta.edu/eos. For information regarding Title IX, visit uta.edu/titleix.

MAVALERTSSign up your Alert Network account to receive local alerts and emergency notifications: mavalert.uta.edu/register.php

POLICIES

SERVING REGION VIArkansas | Louisiana | New Mexico

Oklahoma | Texas

uta.edu/ded/osha | [email protected] | 866.906.9190

Follow us:

https://web-ded.uta.edu/wconnect/ace/osha_policies.asp



mailto:osha%40uta.edu?subject=

https://www.facebook.com/uta.osha

https://twitter.com/UTAOSHA

https://www.linkedin.com/company-beta/3876723/

Mavericks G

o Green!

Made w

ith Recycled Content.

November 28 - 29, 2017

Houston, Texas

866.906.9190oilandgasconference.org

REGISTER NOW

140 W. Mitchell St. | Arlington, TX 76019

oilandgasconference.org


register today: 866.906.9190 | uta.edu/ded/osha | osha@uta ... hs... · n osha #3115 fall...

Documents