relay selection guide

Single and Twin PCB Relays Plug-In Relays High Current Solutions Latching Solutions Altern. Power SystemsRelay Type Power K

(V23133-A / 076-A)Mini K

(V23072-A / C)DMR

(V23084-C)PK2 THT / THR (V23201-C / R)

Micro K THT / THR (V23086-C1 / R1 / C2 / R2)

Micro K SMD (V23086-M1 / M2)

Nano Relay THT / THR (V23138-C1 / R1 and C2 / R2)

Mini ISO Maxi ISO Micro ISOMicro Low Noise

(V23145)Mini / Maxi Shrouded Relays

SPR (V23135)

HCR 75 (V23232)

HCR 150 (V23132)

BDS-A (V23130-C)

Micro Latching (V23145-L)

Mini Latching (V23141-L)

PK2 Latching (V23201-L)

Micro K Latching (V23086-L)

Kilovac LEV100

Features • Limiting continuous current 40 A• Wide voltage range• High current version Power K-S

(V23071) available

• Limiting continuous current 20 A• 24 V versions with special contact gap• Various contact arrangements and

materials• Also available for 42 V applications

• Limiting continuous current 30 A• Easiest PCB routing among all PCB

relays

• Wave (THT) and reflow (THR / pin-in-paste) solderable versions

• 60% volume reduced Power K at increased performance

• PCB area requirements minimized by 50% to only 293 mm2

• Limiting continuous current 40 A• Latching version available


• Single and twin versions• Small power relay• Limiting continuous current 30 A• Minimal weight• Low noise operation

• Single and twin versions• Small relays for surface mounted

technology• Limiting continuous current 30 A• Minimal weight• Low noise operation• Relay designed for convection and

infrared reflow soldering


• Single and twin versions• Smallest automotive PCB relays in their

classes (PCB area 81 mm2 / 157 mm2)• First automotive relays using overmold-

ing technology• Limiting continuous current 30 A• Very easy routing of PCB-layout• Power-saving high impedance coil• Low noise operation

• Limiting continuous current 40 A at 85 °C• Pin assignment similar to ISO 7588 part 1• Plug-in or PCB terminals• Also available for 42 V applications• Customized versions on request: 24 V

versions with 0.8 mm contact gap, inte-grated components (e.g. resistor, diode), customized marking / color, special covers (e.g. notches, release features, brackets), various contact arrange-ments and materials

• Limiting continuous current 70 A• Pin assignment similar to ISO 7588 part 1• Plug-in or PCB terminals• Customized versions on request:

24 V versions with 0.8 mm contact gap, integrated components (e.g. resistor, diode), customized marking / color, special covers (e.g. notches, release features, brackets)

• Limiting continuous current 25 A at 85 °C• High current version with limiting con-

tinuous current 30 A at 85 °C• Pin assignment according to ISO 7588

part 3• Customized versions on request: 24 V

versions with 0.6 mm contact gap, integrated components (e.g. diode), customer marking, special covers (e.g. notches, release features, brackets)

• Noise level below 50 dB(A)• Limiting continuous current 20 A• Pin assignment according to ISO 7588

part 3• Plug-in terminals• Customized versions on request: special

marking, special covers (e.g. notches, release features, brackets)

• Limiting continuous current 40 A (Mini) at 85 °C / 70 A (Maxi)

• Pin assignment according to ISO 7588 part 1

• Bracket• Customized versions on request:

integrated components (e.g. diode), customized marking

• Full, symmetric star-point disconnection of an electric power steering motor

• Limiting continuous current 90 A• Disconnection of high over-currents up

to 200 A in 12 V and up to 60 A in 36 V power nets

• Contact arrangement fulfills 42 V power net requirements

• Resistant against high ambient tempera-ture up to 125 °C

• Optimized dimensions

• Limiting continuous current 75 A• Dustproof and sealed versions

• Limiting continuous current 150 A at 85 °C

• Current switching ability up to 300 A• Suitable for voltage levels up to 42 V • Heat moisture and vibration resistant• Minimal contact resistance• Dustproof and sealed versions

• Limiting continuous current 190 A at 85 °C

• Electrically settable and resettable ON /OFF bistable device

• Suitable for voltage levels up to 42 V• High peak current carrying capability up

to 1500 A

• Magnetically latched Micro ISO plug-in relay

• Two coils with set and reset function• Pin assignment according to ISO 7588

part 3• Plug-in terminals• Customized versions on request: special


• Magnetically latched Mini ISO plug-in relay

• Two coils with set and reset function• Pin assignment similar to ISO 7588 part 1• Plug-in terminals• Customized versions on request: special


• Magnetically latched PCB power relay• Limiting continuous current 50 A• Increased ambient temperature 125 °C• Maximum switch on current• Reduced coil power consumption of

latching version allows higher limiting continuous current and increased ambi-ent temperature

• 60% volume reduced Power K• Design allows highest reliability• High shock and vibration resistance• No change of switching state version at

breakdown of battery voltage

• Smallest magnetically latched PCB relay• Only set and reset pulse no continuous

coil power required• Increased ambient temperature up to

125 °C• Limiting continuous current up to 35 A• Footprint compatible with Micro Relay K• Two coils with set and reset function• Minimal weight

• 900 VDC 100 A, hermetically sealed DC contactor

• Side or bottom mount - not position sensitive

ELV / RoHS / WEEE status Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant Compliant RoHS CompliantContacts Contact arrangement 1 Form A 1 Form C 1 Form A 1 Form C 1 Form U 2 Form C 1 Form A 1 Form A 1 Form C 2 Form C 1 Form C 2 Form C 1 Form C 2 Form C 1 Form A / (2 x 87) 1 Form C 1 Form U 1 Form A 1 Form A 1 Form C 1 Form A 1 Form C 1 Form A (Mini) 1 Form C (Mini) 1 Form A (Maxi) 1 Triple make contact 1 Form A 1 Bifurcated contact 1 Form A 1 Form X 1 Form X 1 Form A 1 Form A 1 Form A 1 Form C 1 Form XMax. switching current – ON [A] 100 A 30 / 100 A (NC / NO) 60 A 12/60 A (NC/NO) 2 x 40 A 35 A 200 A 40 A (100 A) 40 A 40 A 40 A 40 A 30 A 30 A 120 A 45/120 A (NC/NO) 2 x 100 A 240 A 120 A 40 / 120 A (NC / NO) 100 A 40 A 120 A 45/120 A (NC/NO) 240 A 75 A 150 A 300 A 300 A 190 A - 50k / 100 A - 100k 50 A 200 A 200 A 50 A on set contact, 20 A on reset contact 600 A (Make) at +400 VMax. switching current – OFF [A] 60 A 30 / 60 A (NC / NO) 20 A 10/20 A (NC/NO) 2 x 20 A 35 A 40 A 30 A 30 A 30 A 30 A 30 A 30 A 30 A 60 A 40/60 A (NC/NO) 2 x 40 A 70 A 30 A 15 / 30 A (NC / NO) 30 A 30 A 60 A 40/60 A (NC/NO) 70 A 200 A / > 10 cycles 75 A 100 A 300 A 300 A 190 A - 50k / 100 A - 100k 30 A 40 A 40 A 30 A on set contact, 20 A on reset contact 1000 A (Break) at +400 VMax. switching current – ON / OFF / ON at 23 °C [A] 1500 A - 5 timesMax. limiting current at 23 °C [A] 120 A 1500 A for 200 ms, 1000 A for 1 sLimiting continuous current at 23 °C [A] 45 A 30 / 45 A (NC / NO) 15 A 10/15 A (NC/NO) 2 x 10 A 30 A motor reverse 40 A 30 A 25/30 A (NC/NO) 25/30 A (NC/NO) 25 / 30 A (NC / NO) 25 / 30 A (NC / NO) 25 / 30 A (NC / NO) 25 / 30 A (NC / NO) 60 A 45/60 A (NC/NO) 2 x 32 A 70 A 30 A 20 / 30 A (NC / NO) 20 A 15 / 20 A (NC / NO) 60 A 45/60 A (NC/NO) 70 A 75 A 75 A 180 A with cable 25 mm² 170 A with cable 25 mm² 260 A 25 A 40 A 50 A 40 A on set contact, 20 A on reset contact 100 ALimiting continuous current at 85 °C [A] 30 A 25 / 30 A (NC / NO) 10 A 5/10 A (NC/NO) 2 x 6 A 30 A motor reverse 33 A 20 A 15/20 A (NC/NO) 15/20 A (NC/NO) 15 / 20 A (NC / NO) 15 / 20 A (NC / NO) 15 / 20 A (NC / NO) 15 / 20 A (NC / NO) 40 A 30/40 A (NC/NO) 2 x 35 A 50 A 25 A 15 / 25 A (NC / NO) 15 A 10 / 15 A (NC / NO) 40 A 30/40 A (NC/NO) 50 A 90 A (60 A at 125 °C) 50 A 50 A 130 A with cable 25 mm² 120 A with cable 25 mm² 190 A 20 A 30 A 40 A 30 A on set contact, 15 A on reset contact 80 AContact material options Silver based Silver based Silver based Silver based Silver based Silver based Silver based Silver based Silver based Silver based Silver based Silver based Silver based Silver based AgSnO2 Silver based Silver based Silver based Silver based Silver based Copper basedCoilCoil voltage range [V] 12, 24 V 12, 24 V 12 V 12 V 10, 12 V 10, 12 V 12 V 12 V 12, 24 V 12, 24 V 12, 24 V 12 V 12 V 12, 24, 36 V 12, 24 V 12 V 12 V 24 V 12, 24, 42 V 12 V 12 V 12 V 12 V 12 VNominal coil power [W] 1.6 W 1.1 W 0.56, 0.81 W 0.8 W 0.55 W 0.55 W 0.57 W 0.64 W 0.64 W 0.8 W 0.8 W 1.6 W 1.6 W 1.6 W 2.0 W 1.4 W 1.4 W 0.9 W 0.6 W 1.5 W 1.5 W 1.8 W 1.5 W 7.2, 4.4 W 3.1 W 4.1 W Excitation with pulses (15…100 ms) Pulsed driving Pulsed driving Pulsed driving Pulsed driving 5.5 W (standard version)/9.5 W (low pull-in version)General DataOperate time - typ. [ms] 5 ms 3 ms 3 ms 3 ms 3 ms 3 ms 3 ms 7 ms 7 ms 5 ms 3 ms 8.5 ms < 20 ms < 15 ms < 30 ms < 15 ms 1.5 ms 1.5 ms 1.5 ms 1.5 ms 11.5 msRelease time - typ. [ms] 3 ms 1.5 ms 1.3 ms 1.5 ms 1.5 ms 1.5 ms 1.5 ms 2 ms 2 ms 3 ms 2 ms 4 ms 4 ms < 10 ms < 15 ms < 15 ms < 15 ms 1.5 ms 1.5 ms 1.5 ms 1.5 ms 4.5 msTemperature range [°C] -40 to +85 °C -40 to +85 °C -40 to +85 °C -40 to +105 °C -40 to +105 °C -40 to +105 °C -40 to +105 °C -40 to +125 °C -40 to +125 °C -40 to +125 °C -40 to +85 °C -40 to + 85 °C -40 to +125 °C -40 to +125 °C -40 to + 125 °C -40 to +120 °C -40 to +125 °C -40 to +125 °C -40 to +125 °C -40 to +125 °C -40 to +85 °CSealing Open or sealed Open or sealed Sealed / Open vent hole Sealed / Open vent hole Sealed Sealed / Open vent hole Dustproof Dustproof Dustproof Dustproof Shrouded: protection class IP 67

if used with special connector Sealed Dustproof Dustproof / Sealed Dustproof / Weatherproof Dustproof Dustproof Sealed Sealed Sealed

Termination method PCB PCB PCB PCB PCB PCB - SMD PCB Quick connect, PCB Quick connect, PCB Quick connect Quick connect Quick connect Welding assembly Quick connect (coil) / Screw terminals (load) Quick connect (coil) / Screw terminals (load) Quick connect (coil) / Screw terminals (load) Quick connect Quick connect PCB PCB Stripped wires (coil)/M5 threaded inserts (load)Maximum dimensions - l x w x h [mm] Open - 24 x 19.25 x 18.5 mm

Sealed - 26.5 x 21.5 x 21.5 mmOpen - 16 x 13.2 x 18 mm

Sealed - 17.2 x 15 x 19.5 mm 17.6 x 17 x 13.4 mm 18.5 x 16.2 x 16.1 mm Single - 13.2 x 12.2 x 10.1 mm (10.4 THR)Twin - 23.8 x 13.2 x 10.1 mm (10.4 THR)

Single - 13.2 x 12.2 x 11.5Twin - 23.8 x 13.2 x 11.5

Single - 8.1 x 14.1 x 10.3 mmTwin - 15.4 x 10.3 x 14.1 mm 26.2 x 26.2 x 25.2 mm 26.2 x 26.2 x 25.2 mm 23 x 15.5 x 25.4 mm 23 x 15.5 x 25.4 mm 32.7 x 35.5 x 54.2 mm 32.3 x 18.3 x 18.8 mm 44.0 x 36.0 x 39.0 mm 63.0 x 40.0 x 71.0 mm 36.0 x 33.0 x 60.0 mm 23 x 15.5 x 25.4 mm 30.1 x 30.1 x 31.1 mm 18.5 x 16.2 x 16.1 mm 13.2 x 12.2 x 10.1 mm 54.2 x 35.4 x 57.8 mm

PCB Power RelaysRelay Type PE / PE bistable RE / REL PCN SNR (V023061) OJ / OJE / OJT / T77 PCH EJ PCJ RY / MSR (V023061) / T75 RZ RT RT1 specials RX RP3SL OMI / OMIH / OMIT OZ / OZT RF 410 OMIF / OZF EK PCK EF PCF / PCFN OSA OSZ SDT

Features • Sensitive coil 200 mW• 4 kV coil-contact• Low height 10.0 mm• Designed for White Goods applications (acc. IEC60335-1/30)

• Sensitive coil 200 mW• 4 kV coil-contact• Optimized height 10.6 mm• PCB area 200 mm2

• Only 5 mm wide, packing high density

• Sensitive coil 120 mW• Cadmium free contacts

• Only 5 mm wide • Cadmium-free contacts• Sensitive coil 170 mW• 4 kV coil-contact• 6 / 8 mm creepage / clearance• Protection class II

• Miniature size • Meets 4 kV dielectric between

coil and contacts (OJ / OJT)• Sensitive coil 200 mW type

available• Meets UL TV-5 ratings (OJT)• WG version (acc. IEC60335-1/30)

• Compact size• Meets 8 kV surge voltage be-

tween coil and contacts• Cadmium-free contacts• WG version (acc. IEC60335-1/30)• TV-3 ratings for NO contact

• Slim outline• Sensitive coil 200 mW• Ambient temperature 85 °C• Coil UL class 155 (F) insulation

system• WG version (acc. IEC60335-1/30)

• Slim outline• Sensitive coil 200 mW• Meets 4 kV dielectric between

coil and contacts• Cadmium-free contacts• WG version (acc. IEC60335-1/30)• Ambient temperature 105 °C

(WG type)• Coil UL class 155 (F) insulation

system

• 5 kV / 8 mm coil-contact• Reinforced Insulation• Low height 12.3 mm• Pinnings: 3.2 and 5 mm• Sockets with PCB-type or

screw-type terminals• Reflow version available• Designed for White Goods applications (acc. IEC60335-1/30)

• Sensitive coil 400 mW • 5 kV / 10 mm coil-contact • Reinforced insulation • Ambient temperature 85 or

105 °C• Height 15.7 mm • Designed for White Goods applications (acc. IEC60335-1/30)

• Sensitive DC and AC coil • Bistable version• 5 kV / 10 mm coil-contact • Reinforced insulation • Ambient temperature 85 °C• Height 15.7 mm • THR version• WG version (acc. IEC60335-1/30)

Versions:• Sensitive coil 250 mW• Inrush peak currents up to 165 A• 105 °C ambient temperature• Bifurcated contacts

• 4 kV / 8 mm coil-contact • Reinforced insulation • Height 15.7 mm• Transparent cover optional

• 4 kV / 8 mm coil-contact • For 120 A / 20 ms inrush peak

current• Bistable version

• Meets 5 kV dielectric voltage• 10 kV surge voltage between

coil and contacts• Version with 1 NO contact TV-5

rating (OMIT)


coil and contacts• Meets UL TV-8 rating (1 NO

contact only)

• Quick connect terminals on load side

• Switching capacity 4000 VA• Coil power 400 mW• Reinforced insulation• WG version (acc. IEC60335-1/30)

• Insulation to VDE 0631 and VDE 0700

• Ambient temperature up to 125 °C

• Quick connect terminals• Version with contact gap > 3 mm• WG version (acc. IEC60335-1/30)


coil and contacts.• #187 quick connect terminal

• #187 quick connect terminal• 20.1 mm low profile (without

tab)• Meets 4k V dielectric voltage

between coil to contacts• Ambient temperature +85 °C

• #187 quick connect terminal• Height 26.7 mm (without tab)• Meets 4 kV dielectric voltage

between coil to contacts• Ambient temperature +85 °C

• Low profile max. 20.0 mm• #250 quick connect terminal• Meets 4 kV dielectric voltage

between coil and contact• Ambient temperature +85 °C

• #250 quick connect terminal (PCF only)

• Height 26.5 mm• Meets 4 kV dielectric voltage

between coil and contact• Ambient temperature +85 °C

• Meets UL TV-3, CSA TV-4 ratings (DM5 type only)

• Meets 4 kV dielectric voltage• 7 kV surge voltage between coil

and contacts

• Meets UL TV-8 ratings• Meets 4 kV dielectric voltage• 7 kV surge voltage between coil

and contacts

• Meets UL TV-5 and TV-8 ratings• Immersion cleanable, sealed

version available• Applications include appliance,

HVAC, FPD, Monitor display

ContactsContact arrangement

SPDT / 1 Form C / 1 C/O SPST / 1 Form A / 1 N/O SPST / 1 Form A / 1 N/O SPDT / 1 Form C / 1 C/OSPST / 1 Form A / 1 N/O SPST / 1 Form A / 1 N/O SPDT / 1 Form C / 1 C/O

SPST / 1 Form A / 1 N/O SPST / 1 Form A / 1 N/O SPST / 1 Form A / 1 N/O SPDT / 1 Form C / 1 C/OSPST / 1 Form A / 1 N/O

SPDT / 1 Form C / 1 C/OSPST / 1 Form A / 1 N/O

SPDT / 1 Form C / 1 C/OSPST / 1 Form A / 1 N/ODPDT / 2 Form C / 2 C/ODPST / 2 Form A / 2 N/O


SPDT / 1 Form C / 1 C/OSPST / 1 Form A / 1 N/ODPDT / 2 Form C / 2 C/ODPST / 2 Form A / 2 N/O

SPST / 1 Form A / 1 N/O SPDT / 1 Form C / 1 C/OSPST / 1 Form A / 1 N/O


SPST / 1 Form A / 1 N/OSPSD / 1 Form B / 1 N/C

SPST / 1 Form A / 1 N/OSPSD / 1 Form B / 1 N/C SPST / 1 Form A / 1 N/O SPST / 1 Form A / 1 N/O SPST / 1 Form A / 1 N/O SPST / 1 Form A / 1 N/O SPST / 1 Form A / 1 N/O DPST / 2 Form A / 2 N/O SPST / 1 Form A / 1 N/O SPST / 1 Form A / 1 N/O

Rated voltage DC / AC [V] 250 VAC 250 VAC 250 VAC / 30 VDC 250 VAC 250 VAC / 28 VDC 277 VAC / 30 VDC 250 VAC / 30 VDC 250 VAC 250 VAC 250 VAC 250 VAC 250 VAC 250 VAC 250 VAC 250 VAC / 30 VDC 240 VAC / 30VDC 250 VAC 250 VAC 240 / 250 VAC 30VDC 250 VAC 277 VAC 250 VAC 250 VAC 120, 240 VAC / 24, 30 VDC 240 VAC / 24 VDC 250 VAC / 30 VDCRated current [A] 5 A 6 / 5 A 3 A 6 A 3 / 5 / 8 / 10 A 3 / 5 / 10 A 3 / 5 A 3 / 5 A (WG type) 8 A 16 A 8 / 16 A 12 / 16 A 8 / 16 A 16 A 10 / 16 A 16 A 16 A 16 A 16 A 16 A 16 A 20 A 25 A 3 A / 5 A 16 A 5 A, 10 ARated load [W / VA] 1250 VA 1500 VA / 1250 VA 1250 VA / 150 W 1500 VA 720 - 2500 VA / 90 - 240 W 1400 VA / 150 W (NO), 850 VA / 90 W (NC) 1200 VA / 150 W 750 VA / 1250 VA (WG type) 2000 VA 4000 VA 2000 VA / 4000 VA 4000 VA 2000 VA / 4000 VA 4000 VA 2400 VA / 300 W, 3800 VA / 480 W 3850 VA / 600 mW 4000 VA 4000 VA 4000 VA / 385 W 4000 VA 4000 VA 5000 VA 6370 VA 300 VA / 1100 VA 2400 VA, 380 W 1250 VA /150 W (LMR), 2500 VA / 300 W (DMR)Minimum load [V / A] 1) 1) 1 mA / 5 VDC 1) 100 mA at 5 VDC 100 mA at 5 VDC 100 mA at 5 VDC 100 mA at 5 VDC 1) 24 V / 10 mA 24 V / 10 mA 24 V / 10 mA 24 V / 10 mA 1) 100 mA at 5 VDC 100 mA at 5 VDC 1) 500 mA / 12 VAC 100 mA at 5 VDC 100 mA at 5 VDC 100 mA at 5 VDC 100 mA at 5 VDC 100 mA at 5 VDC 100 mA at 5 VDC 100 mA at 5 VDC 100 mA at 5VDCCoilCoil type DC, bistable DC DC DC, bistable DC, sensitive DC, sensitive DC DC DC DC DC, AC, bistable DC DC, AC DC DC DC DC DC DC DC DC DC DC DC DC DCCoil power [mW] DC-coil 200 mW 200 / 360 mW 120 mW 170 mW 200 / 250 / 450 mW 200 / 400 mW 200 mW 200 mW 220 mW 400 mW 400 mW 200 / 250 / 400 mW 500 mW 500 mW 540 / 720 mW 540 / 720 mW 400 mW 360 mW 540 mW 500 mW 500 mW 900 mW 900 mW 540 mW 540 mW 250 / 540 mW

AC-coil 0.75 VA 0.75 VACoil voltages [V] DC-coil 3...48 VDC 5...48 VDC 3...24 VDC 5...48 VDC 5...48 VDC 5...48 VDC 3…24 VDC 5...24 VDC 5…60 VDC 5...48 VDC 5...110 VDC 5...60 VDC (110) 5...110 VDC 6...110 VDC 5...48 VDC 5...48 VDC 5…60 VDC 6...60 VDC 12…24 VDC 5…48 VDC 5…24 VDC 5…48 VDC 6…24 VDC 5...48 VDC 5…48 VDC 5...48 VDC

AC-coil 24...230 VAC 24...230 VACInsulation Breakdown voltage [Vrms] Coil-contact 4000 Vrms 4000 / 3000 Vrms 3000 Vrms 4000 Vrms 3000 / 4000 Vrms 4000 Vrms 4000 Vrms 4000 Vrms 5000 Vrms 5000 Vrms 5000 Vrms 5000 Vrms 4000 Vrms 4000 Vrms 5000 Vrms 5000 Vrms 4000 Vrms 4000 Vrms 5000 Vrms 5000 Vrms 5000 Vrms 4000 Vrms 4000 Vrms 4000 Vrms 4000 Vrms 4000 Vrms

Opened contacts 1000 Vrms 1000 Vrms 750 Vrms 1000 Vrms 750 / 1000 Vrms 750 Vrms 750 Vrms 750 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 2000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 VrmsAdjacent contacts 2500 Vrms 2500 Vrms 2000 Vrms

Clearance / creepage [mm] 3.2 / 4 mm 4 / 4 mm 3.7 / 3.7 mm 6 / 8 mm 8 / > 8 mm; 3.6 / 3.6 mm 3.5 / 6.7 mm 8 / 8 mm (WG type) 8 / > 8 mm 8 / 8 mm 10 / 10 mm 10 / 10 mm 10 / 10 mm 8 / 8 mm 8 / 8 mm > 8 / > 8 mm > 8 / > 8 mm 8 / 8 mm 8 / 8 mm 6.4 / 9.5 mm 6.4 / 9.5 mm 6.4 / 9.5 mm 6.7 / > 8 mm 7.1 / 7.1 mm > 8 / > 8 mm 6.7 / 6.7 mmGeneral DataAmbient temperature [°C] +85 °C +70 °C +70 °C +85 °C up to +85 °C +70 °C (standard)

+85 °C (WG version) +85 °C +85 °C (standard)+105 °C (WG version) +85 °C +85 °C / +105 °C +85 °C +85 °C / +105 °C +70 °C / +85 °C +70 °C +60 °C (standard)

+70 °C (sensitive)+55 °C (standard)+70 °C (sensitive) +85 °C / +105 °C +125 °C +70 °C +85 °C +70 °C +85 °C +85 °C +70 °C +65 °C +70 °C

Sealing RT II, RT III RT III RT III RT III RT II, RT III RT II, RT III RT II, RT III RT II, RT III RT II, RT III RT II, RT III RT II, RT III RT II RT II RT II, RT III RT II, RT III RT II, RT III RT II RT II RT II RT II RT II RT II RT II RT II, RT III RT II, RT III RT II, RT IIITermination THT THT THT THT THT THT THT THT THT THT THT, THR THT THT THT THT THT THT, Quick connect THT, Quick connect THT, #187” quick connect THT, #187” quick connect THT, #187” quick connect THT, #250” quick connect THT, #250” quick connect THT THT THTDimensions [mm] 20 x 10 x 10 mm 20 x 10 x 10.6 mm / 20.7 x 10.7 x 12 mm 20 x 5 x 12.5 mm 28 x 5 x 15 mm 18.2 x 10.2 x 14.7 mm 20 x 10 x 15.2 mm 20.4 x 6.9 x 15 mm 20.4 x 7 x 15 mm 28.5 x 10.1 x 12.3 mm 29 x 12.7 x 15.7 mm 29 x 12.7 x 15.7 mm 29 x 12.7 x 15.7 mm 29 x 12.7 x 15.7 mm 29 x 12.6 x 25.5 mm 29.2 x 12.8 x 20.6 mm 29.2 x 12.8 x 20.6 mm 40.5 x 12.7 x 16 mm 40.5 x 12.5 x 28.5 mm 29.0 x 12.6 x 34.3 mm 23.7 x 12.3 x 20.1 mm 22.8 x 11.6 x 26.7 mm 30.4 x 16.0 x 20 mm 30.4 x 16 x 26.5 mm 24.4 x 12.9 x 25 mm 24.4 x 12.9 x 24.8 mm 24.4 x 10.4 x 25.0 mmCertifications VDE, cULus VDE, cULus UL, VDE VDE, cULus UL, CSA, VDE, TÜV UL, CSA, VDE UL, TÜV, CQC, VDE (in process) UL, VDE, CSA VDE, cULus VDE, cULus VDE, ULus, CSA, BEAB VDE, cULus VDE, cULus VDE, cULus UL, CSA, VDE, SEMKO UL, CSA, TÜV VDE, cULus VDE, cULu, BEAB, SEMKO, SEV UL, CSA, VDE, TÜV UL, TÜV UL, CSA, VDE UL, TÜV UL, CSA, TÜV UL, CSA, TÜV, SEMKO UL, CSA, TÜV UL, CSA, SEMKO, TÜV, SEV

Automotive Relays and Switching Modules

General Purpose Relays

PCB Power Relays Safety Relays Panel / Plug-in RelaysRelay Type TSC OUAZ / T81 OUDH / T73 PB / PBH ORWH / T7S PCE / T7N SRUDH / T7C LN / LNH PCD / PCDF PCFN Solar T9A / T9C T92 EW TDC 430 419 SR2M SR4 D / M SR6 SNR Plug-in XT PT / KH / PCL PT-F / K10 / PCLH MT / KR RM / KU KUL

Features • Designed for thermostat, modem, computer peripherals, video recording and security applications

• Low coil power requirement for IC compatibility

• Gold overlay silver palladium alloy contact suitable for low loads

• High density available on PCB due to small size

• 2.54 mm terminal pitch same as IC socket terminal pitch

• Sensitive and standard coils

• Low profile miniature power relay

• High density available on PCB due to small size

• Meets 2 kV dielectric between coil and contacts

• Meets 5 kV surge voltage

• Environmentally-friendly cadmium-free contacts

• Creepage / clearance to VDE 0435 and VDE 0700

• Class F coil available• Designed for White Goods applications (acc. IEC60335-1/30)

• For use in small home appliances such as irons, vacuum cleaners, gaming etc.

• WG version (acc. IEC60335-1/30) for applications as laundry, dryer and “hot applications”• Low-profile, low cost relay

• Low cost, small package, 10 A switching capacity

• UL Class F (155 °C) insulation system standard

• Immersion cleanable, sealed version available

• WG version (acc. IEC60335-1/30)

• Low cost, small package, 12 A switching capacity (at 120 VAC)

• Applications include appliance, HVAC, security system, garage opener control, emergency lighting

• High performance Sugar Cube Relay

• Designed for White Goods applications (acc. IEC60335-1/30) such as “hot applications” i.e. touch controls

• 16 A at 85 °C• 10 A at 105 °C

• Low coil power 200 mW• Height 10.2 mm• Wash tight• Version with quick connect

terminals

• Specially designed to meets the requirements for the solar inverter industry

• Contact gap > 1.5 mm • 200 mW hold power

• High breaking capacity • PCB- and quick connections

and chassis mount version • UL-class F as standard • Ambient temperature +85 °C • Open version available

• Switching capacity 7500 VA • DC- or AC coil • 4 kV / 8 mm coil-contact • Insulation to VDE 0631 and

VDE 0700 • PCB- or quick connections or

chassis mount

• 80 A switching capacity• Heavy load 20.000 VA• 1 coil latching• 4000 VAC coil to contact dielec-

tric endurance

• DC-1 Utilization category, fulfills IEC 60947-4-1 / GB 14048.4

• Typical applications include battery switching and backup, DC voltage power control, circuit protection and safety

• 4 kV / 8 mm coil-contact • DC- or AC coil • PCB mounting or Quick connect • Mounting brackets or snap

mounting

• Contact gap > 3 mm • Switching capacity 4000 VA • DC- or AC coil • Safety mains insulation • 4 kV / 8 mm coil-contact • Quick connect terminals • Snap or screw mount

• Relay with forcibly guided con-tacts according to EN 50205

• 6 kV surge resistance between poles

• DIN rail mount module version


• Small size


• DIN rail mount module version

• Width 5 mm• Cadmium-free contacts• Sensitive coil 170 mW• 4 kV coil-contact • Reinforced insulation

• Sensitive coil 400 mW • Cadmium-free contacts • Reinforced insulation • 4 kV / 8 mm coil-contact

• Sensitive coil • Low height 29 / 33 mm • Cadmium-free contacts • Mechanical indicator • Manual test tab, optionally

lockable• Optional LED, protection diode

• Mounting options include socket, PCB, top flange

• LED versions available

• Industry standard octal / undecal type termination for quick installation

• DC- and AC-coils• Mechanical indicator, indicator

lamp and push-to-test options

• Wide selection of termination and mounting styles

• PC terminals available• Push to test button and indica-

tor lamps• Complete line of sockets and

DIN rail mounting• Class B coil insulation

• Magnetic latching with single and dual coils, panel mounting


SPDT / 1 Form C / 1 C/OSPST / 1 Form A / 1 N/O SPDT / 1 Form C / 1 C/O SPDT / 1 Form C / 1 C/O

SPST / 1 Form A / 1 N/OSPDT / 1 Form C / 1 C/OSPST / 1 Form A / 1 N/O




SPDT / 1 Form C / 1 C/OSPST / 1 Form A / 1 N/O SPST / 1 Form A / 1 N/O SPST / 1 Form A / 1 N/O SPDT / 1 Form C / 1 C/O

SPST / 1 Form A / 1 N/ODPDT / 2 Form C / 2 C/ODPST / 2 Form A / 2 N/O SPST / 1 Form A / 1 N/O 1 Form X (SPST-NO-DM) DPDT / 2 Form C / 2 C/O

DPST / 2 Form A / 2 N/O DPST / 2 Form A / 2 N/ODPST / 1 Form A + 1 Form B / 1

N/O + 1 N/CDPDT / 2 Form C / 2 C/O

4PST / 2 Form A + 2 Form B / 2 N/O + 2 N/C





SPDT / 1 Form C / 1C/O SPDT / 1 Form C / 1 C/ODPDT / 2 Form C / 2 C/O

DPDT / 2 Form C / 2 C/O3PDT / 3 Form C / 3 C/O4PDT / 4 Form C / 4 C/O

DPDT / 2 Form C 2 C/O DPDT / 2 Form C / 2 C/O3PDT / 3 Form C / 3 C/O

SPDT / 1 Form C / 1 C/ODPDT / 2 Form C / 2 C/O3PDT / 3 Form C / 3 C/O4PDT / 4 Form C / 4 C/O

SPDT / 1 Form C / 1 C/ODPDT / 2 Form C / 2 C/O3PDT / 3 Form C / 3 C/O

Rated voltage DC / AC [V] 120 VAC / 24 VDC 120 VAC / 24 VDC 120 VAC / 28 VDC 250 VAC 250 VAC / 28 VDC 250 VAC / 28 VDC 240 VAC / 28 VDC 250 VAC 250 VAC / 24 VDC 277 VAC 250 VAC 400 VAC 250 VAC 48 VDC 250 VAC 250 VAC 250 VAC 250 VAC 250 VAC 240 VAC 240 VAC 240 VAC 120 / 240 VAC 240 VAC 230 / 400 VAC 28 VDC / 240 VACRated current [A] 1 A 1 A 10 A 10 A 6 A / 10 A 10 A 10 A 10 A / 16 A 10 A 26 A 30 A 30 A 80 A 100 A 10 A 16 A 6 A 8 A 8 A 6 A 16 A / 8 A 12 A / 10 A / 5/6 A 15 / 10 A 10 A 10 / 16 / 25 / 30 A 10 ARated load [W / VA] 120 VA / 24 W 120 VA / 30 W 1200 VA / 300 W 2500 VA 2500 VA / 280 mW 2500 VA / 280 mW 2400 VA / 300 W 2500 VA / 4000 VA 1800 VA, 240 W 7200 VA 7500 VA 7500 VA 20000 VA 4800 W 2500 VA 4000 VA 1500 VA 2000 VA 2000 VA 1500 VA 4000 VA / 2000 VA 3000 VA / 2500 VA / 1500 VA 1800 / 2500 VA 2500 VA 2400 VAMinimum load [V / A] 1 mA at 1 VDC 1 mA at 1 VDC 100 mA at 5 VDC 1) 100 mA at 5 VDC 100 mA at 5 VDC 100 mA at 5 VDC 100 mA at 5 VDC 100 mA at 5 VDC 1) 1 A at 5 VDC or 12 VAC 100 mA at 6 VAC / VDC 100 mA at 12 VAC 1) 1) > 50 mW > 50 mW > 50 mW 1) 1)

1), Bifurcated contacts for dry circuit available on KH

1) 1) 1)

CoilCoil type DC, sensitive DC, sensitive DC DC DC DC DC DC DC DC DC, AC DC, AC DC DC DC, AC DC, AC DC DC DC DC DC, AC DC, AC DC, AC DC, AC DC, AC DC, ACCoil power [mW] DC-coil 150 / 300 mW 200 / 450 mW 450 mW 360 mW 360 mW 360 mW 360 mW 400 mW 200 mW 1.5 W / 200 mW hold Power 1 W 1.7 W 1 W 4.8 W 1 W 1.3 W 700 mW 800 mW 1200 mW / 800 mW 170 mW 400 mW 750 / 900 mW 750 / 900 mW 1.2 W 1.2...1.8 W 1.6 W dual coil / 1.2 W single coil

AC-coil 1.2 VA 4.0 VA 1.8 VA 2.0...2.5 VA 0.75 VA 1 / 1.2 VA 1 / 1.2 VA 2 / 2.3 VA 2...2.8 VACoil voltages [V] DC-coil 5...24 VDC 5...24 VDC 3...48 VDC 5, 6, 12, 24 VDC 3…48 VDC 5...48 VDC 5...48 VDC 5...48 VDC 5...48 VDC 12 V 6...48 VDC 6...48 VDC 5…24 VDC 12...24 VDC 6...110 VDC 6...24 VDC 5...110 VDC 5...110 VDC 5...110 VDC 5…60 VDC 6...110 VDC 6...220 VDC 12…220 VDC 6...220 VDC 6...220 VDC 12...48 VDC single or dual

AC-coil 12…240 VAC 24...240 VAC 6...240 VAC 120...400 VAC 24...230 VAC 6...240 VAC 12...240 VAC 6...240 VAC 6...240 VAC 24...240 VAC single; 24...120 VAC dualInsulation Breakdown voltage [Vrms] Coil-contact 1000 Vrms 1000 Vrms 2000 Vrms 2500 Vrms 1500 Vrms 2000 Vrms 1500 Vrms 2000 Vrms 2000 Vrms 4000 Vrms 2500 Vrms 4000 Vrms 4000 Vrms 2000 Vrms 4000 Vrms 4000 Vrms 4000 Vrms 4000 Vrms 3000 Vrms 4000 Vrms 4000 / 5000 Vrms 2500 Vrms 1500 Vrms 2500 Vrms 2200 / 3750 Vrms 500 Vrms

Opened contacts 400 Vrms 500 Vrms 750 Vrms 1000 Vrms 750 Vrms 750 Vrms 750 Vrms 1000 Vrms 1000 Vrms 2500 Vrms 1500 Vrms 1500 Vrms 1500 Vrms 750 Vrms 1000 Vrms 2000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1200 Vrms 1200 Vrms 1500 Vrms 1200 / 3500 Vrms 1500 VrmsAdjacent contacts 2000 Vrms 3000 Vrms 2500 Vrms 3000 Vrms 2500 Vrms 2000 / 2500 Vrms 2500 Vrms 2500 Vrms 1500 Vrms

Clearance / creepage [mm] 1.5 / 1.5 mm 1.6 / 1.6 mm 4.4 / 4.4 mm 3 / 4 mm 2.5 / 2.5 mm 2 / 3 mm 2.5 / 2.5 mm 2.5 / 2.5 mm 4 mm 6.1 / 6.1 mm 3.1 / 6.3 mm 8 / 9.5 mm 6 / 6 mm 2.0 / 2.5mm 8 / 8 mm 8 / 8 mm 8 / 8 mm 8 / 8 mm 5.5 / 5.5 mm ≥ 6 / 8 mm ≥ 8 / 8 mm ≥ 4 / 4 mm ≥ 3.1 / 3.1 mm ≥ 2.8 / 4 mm ≥ 3.5 / 6 mmGeneral DataAmbient temperature [°C] +80 °C +75 °C (sensitive) / +60 °C (standard) +60 °C +85 °C +85 °C +85 °C +60 °C +105 °C / +85 °C +70 °C +85 °C +85 °C +65 °C / +85 °C +70 °C +85 °C +70 °C +90 °C +70 °C +70°C +70 °C Relay +85 °C +70 °C / +85 °C +70 °C +70 °C DC: +60 °C / 70 °C, AC: 50 °C / 55 °C +45 °C to +95 °CSealing RT II, RT III RT II, RT III RT II, RT III RT II RT II, RT III RT II, RT III RT II, RT III RT II RT II, RT III RT II RT III RT II, RT III RT I RT III RT I RT I RT III RT III RT III RT III RT II RT II RT II RT I RT I Dust Cover type sealingTermination THT THT THT THT THT THT THT THT THT, Quick connect THT THT, Quick connect THT, Quick connect THT, Quick connect M6 screw THT, Quick connect Quick connect THT THT THT Plug-in Plug-in Quick connect, solder Quick connect, solder Plug-in Quick connect, Plug-in #187" quick connectDimensions [mm] 12.5 x 7.4 x 9.9 mm 15.4 x 10.4 x 11.2 mm 21.8 x 17.1 x 15.3 mm 15 x 15 x 20 mm 19.2 x 15.5 x 15.3 mm 22 x 16 x 16.4 mm 20.2 x 16.5 x 20.2 mm 20.2 x 16.5 x 20.2 mm 23 x 16.1 x 10.2 mm 30.4 x 26.5 x 16 32.3 x 27.4 x 20.4 mm 52.3 x 34.6 x 30.8 mm 36.8 × 17.2 x 30.4 mm 86 x 52 X 80.9 mm 35.5 x 16.4 x 30.5 mm 47 x 24 x 47 mm 29 x 12.6 x 25.5 mm 40 x 13 x 16 mm 55 x 16.5 x 16 mm 28 x 5 x 15 mm 29 x 12.7 x 26.7 mm 28 x 22.5 x 29 / 30 / 33 mm 21.2 x 27.5 x 34.9 mm 35.5 x 35.5 x 57 38.5 x 35.5 x 48.5Certifications UL, CSA UL, CSA, TÜV UL, CSA VDE, cULus VDE, ULus, TÜV UL, CSA, VDE UL, CSA, TÜV VDE, cULus cULus, TÜV VDE, cULus UL, CSA VDE, UL, CSA UL, CQC VDE, CQC VDE, UL VDE, UL, KEMA-KEUR, SEMKO,

DEMKO, NEMKO VDE, ULus, TÜV VDE, ULus, TÜV VDE, cULus VDE, ULus, Lloyds VDE, ULus, Lloyds, CSA UL, CSA VDE, ULus, CSA VDE, ULus, CSA UL, CSA

Panel / Plug-in RelaysRelay Type KBP PRD IEC Contactors Accessories Packages

Features • Dual coil latching to accept momentary impulse to one coil to latch and second impulse to the other coil to release

• Contact ratings to 50 A• Magnetic blowout available for

switching DC loads• SPDT auxiliary switch available

• 3-pole switching plus integral auxiliary contacts

• DIN rail mounting• Finger safe (IP20) terminals• Bimetallic Thermal Overload

relay can be added to create a starter

• Additional auxiliary switches (side or top mount) as well as timer blocks are available

• DIN rail and PCB sockets• Screw and screwless fingersafe

terminals• Retaining and ejection clips• Marking tags, jumper bars• LED and protection modules

• Relay Package consisting of relay, DIN rail socket, plastic retaining clip, marking tag and module

ContactsContact arrangement DPDT / 2 Form C / 2 C/O

4PDT / 4 Form C / 4 C/O5PDT / 5 Form C / 5 C/O

SPDT / 1 Form C / 1 C/ODPDT / 2 Form C / 2 C/O 3PST / DM / N/O



Rated voltage DC / AC [V] 120 VAC 277 VAC, 28 / 125 VDC See rating tables in PBC data sheet 1-1773450-4 240 / 250 VAC 240 / 250 VAC

Rated current [A] 10 A 50 A, 60 / 30 A 9...80 A 6…16 A 6…16 ARated load [W / VA] 1500…4000 VAMinimum load [V / A] 1 A, 12 VDC or VAC 1)CoilCoil type DC, AC DC, AC AC DC, ACCoil power [mW] DC-coil 2.7 W DC 2 W 170 … 700 mW

AC-coil 5.3 to 7.8 W AC 9.8 VA 0.4 … 1 VACoil voltages [V] DC-coil 12...110 VDC 6...220 VDC 6...220 VDC

AC-coil 24...240 VAC 6...480 VAC 24 / 48 / 110-120 / 220-240 / 380 VAC 6...230 VACInsulation Breakdown voltage [Vrms] Coil-contact 500 Vrms 2000 Vrms 2500 V (1 min) According to the used relay According to the used relay

Opened contacts 1000 Vrms 2000 Vrms 2500 V (1 min) According to the used relay According to the used relayAdjacent contacts 1000 Vrms 2000 Vrms 2500 V (1 min) According to the used relay According to the used relay

Clearance / creepage [mm] According to the used relay According to the used relayGeneral DataAmbient temperature [°C] DC: +80 °C, AC: +45 °C -5 °C to +40 °C According to the used relay According to the used relaySealing Dust cover type sealing RT 0 / open IP 20Termination Octal pins Screw, Quick connect Screw clamp Screw, screwless, PCB Screw, screwlessDimensions [mm] 56.6 / 76.2 x 63.8 x 63.5 mmCertifications UL UL, CSA cULus, IEC 60947 VDE, cULus VDE, cULus

Relay Type IM IMD / IME IMA / IMB / IMC P2 FX2 FT2 / FU2 FP2 D2N V23105 MT2 P1 V23026 W11 V23101 Reed DIP Reed SIL Cradle HF3 HF3S HF6

Features • 4G Telecom / Signal relay• Slim line 10 x 6 mm and Low profile 5.65 mm• High Dielectric version• High current version• High stability version• THT, SMT, Gull Wing, J- Leg• 2 - 5 A UL rating

• 4G Telecom / Signal relay• 2 pole make or brake • Slim line 10 x 6 mm and Low profile 5.65 mm• High Dielectric version• THT, SMT, Gull Wing• 2 - 5 A UL rating

• 4G Telecom / Signal relay• 1 pole make, break or change-over• Slim line 10 x 6 mm and Low profile 5.65 mm• High Dielectric version• THT, SMT, Gull Wing• 2 - 5 A UL rating

• 3G Telecom / Signal Relay• Slim line 15 x 7.5 mm• Switching current max. 5 A• High Dielectric Version

• 3G Telecom / Signal Relay• Slim line 15 x 7.5 mm• Standard and sensitive coil• 1800 Vrms between all poles• High mechanical shock resistance

• 3G Telecom / Signal Relay• Slim line 15 x 7.5 mm• Standard and sensitive coil• 125 °C. ambient temperature• Suitable for explosive enviroments• High Dielectric version

• 3G Telecom / Signal Relay• Low profile 5 mm• Standard and sensitive coil• High mechanical shock resistance

• 2G Telecom / Signal Relay • 4 coil sensitives• 3 A UL rating

• 2G Telecom / Signal Relay• 5 coil sensitives• 2 A UL rating

• Very high sensitive Relay• Low profile• High vibration and shock resistance• Temp. range up to 85 °C• 1500 Vrms across opened contacts

• Multi purpose Relay with switching current up to 3 A

• Direct driving with TTL signals• Ultrasonic cleanable• High switching speed• Clamping Diode• Electrostatic shield

• Direct driving with TTL signals• Ultrasonic cleanable• High switching speed• Clamping Diode

• Very high reliability• Great variety of coils and contact sets• Accessories for socked mounting

• High performance / low cost small high frequency Relay / Switch up to 3 GHz• Low power consumption ≤ 70 mW / 140 mW• 50 Ω and 75 Ω version

• High performance small high frequency Relay / Switch up to 3 GHz• Low power consumption ≤ 70 mW / 140 mW• 50 Ω and 75 Ω version RF power 150 W at 2 GHz

• High performance small high frequency Relay / Switch up to 6 GHz• Low power consumption ≤ 70 mW / 140 mW• 50 Ω version


DPDT / 2 Form C / 2C/OBifurcated contacts

DPST / 2 Form B / 2N/CDPST / 2 Form A / 2N/O

Bifurcated contacts

SPST / 1 Form B / 1N/CSPST / 1 Form A / 1N/OSPDT / 1 Form C / 1C/O

Bifurcated contacts





DPDT / 2 Form C / 2C/OSingle contacts


SPDT / 1 Form C / 1C/OBifurcated contacts

SPDT / 1 Form C / 1C/OSingle contacts

SPST / 1 Form A / 1N/ODPST / 2 Form A / 2N/OSPDT / 1 Form C / 1C/O

Reed contacts

SPST / 1 Form A / 1N/OReed contacts Various SPDT / 1 Form C / 1C/O

Bridge contactsSPDT / 1 Form C / 1C/O

Bridge contactsSPDT / 1 Form C / 1C/O

Bridge contacts

Rated voltage 220 VAC / 250 VDC 220 VAC / 250 VDC 220 VAC / 250 VDC 220 VAC / 250 VDC 220 VAC / 250 VDC 220 VAC / 250 VDC 220 VAC / 250 VDC 220 VAC / 250 VDC 220 VAC / 250 VDC 125 VAC / 150 VDC 60 VAC / 125 VDC 175…200 VAC / VDC 180…200 VAC / VDC 30… 250 VAC / VDC 220 VAC / 250 VDC 220 VAC / 250 VDC 220 VAC / 250 VDCRated current 2 A / 5 A 2 A 2 A / 5 A 2 A 2 A 2 A 2 A 3 A 2 A 1 A 1…3 A 0.25…0.5 A 0.5 A 0.2…5 A 2 A 2 A 2 ARated load 60 W / 62.5 VA 60 W / 62.5 VA 60 W / 62.5 VA 60 W / 62.5 VA 60 W / 62.5 VA 60 W / 62.5 VA 60 W / 62.5 VA 60 W / 125 VA 60 W / 62.5 VA 30 W / 60 VA 30…72 W / 60…360 VA 3…10 W 10 W 5…500 W 60 W / 62.5 VA / 50 W (2.5 GHz) 60 W / 62.5 VA / 50 W (2.5 GHz) 60 W / 62.5 VA / 50 W (2.5 GHz)Contact resistance, initial < 50 mΩ < 50 mΩ < 100 mΩ < 50 mΩ < 70 mΩ < 50 mΩ < 50 mΩ < 100 mΩ < 70 mΩ < 50 mΩ < 100 mΩ < 150 mΩ < 150 mΩ on request < 100 mΩ < 100 mΩ < 100 mΩMinimum load* 100 μV / 1 μA 100 μV / 1 μA 100 μV / 1 μA 100 μV / 1 μA 100 μV / 1 μA 100 μV / 10 μA 100 μV / 1 μA 100 μV / 10 μA 100 μV / 1 μA 100 μV / 1 μA 10 μV / 1 μA 10 μV / 1 μA 100 μV / 1 μA 100 μV / 1 μA 100 μV / 1 μACoilCoil type Polarized Polarized Polarized Polarized Polarized Non polarized Polarized Non polarized Non polarized Polarized Non polarized Non polarized Non polarized Non polarized / Polarized Polarized Polarized PolarizedCoil power Non latching 50…200 mW 140 mW 140 mW 140 mW 80…300 mW 200…300 mW 80…300 mW 150…700 mW 150…550 mW 65…130 mW 200…450 mW 50…300 mW 50…300 mW 140 mW 140 mW 140 mW

Latching 1 coil 100…200 mW 140 mW 100…150 mW 100…150 mW 30…130 mW 1450…1650 mW 70 mW 70 mW 70 mWLatching 2 coils 140 mW 200 mW 70…200 mW 1450…1650 mW 140 mW 140 mW 140 mW

Coil voltages 1.5...24 V 1.5...24 V 1.5...24 V 3...24 V 3…48 V 3…48 V 3…48 V 3…48 V 3…48 V 3…24 V 1.5…24 V 5…24 V 5…24 V 5…220 VDC / 6…230 VAC 3…24 V 3…24 V 3…24 VInsulationBreakdown voltage Coil-contacts 1500…1800 Vrms 1800 Vrms 4000 Vrms / IMC 3000 Vrms 1500 Vrms 2700 Vrms 1500…4000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms 500…2000 Vrms 1000 Vrms 1000 Vrms 1000 Vrms

Opened contacts 1000…1500 Vrms 1000 Vrms 2500 Vrms / IMC 1000 Vrms 1000…1500 Vrms 1800 Vrms 1500…1800 Vrms 1000 Vrms 750 Vrms 750 Vrms 500 Vrms 750 Vrms 140…175 Vrms 150…175 Vrms 500…1000 Vrms 600 Vrms 600 Vrms 600 VrmsAdjacent contacts 1000…1800 Vrms 1000 Vrms 1000…1500 Vrms 1800 Vrms 1000…1500 Vrms 750 Vrms 750 Vrms 750 Vrms on request

Breakdown voltage pulse2 / 10 μs / 10 / 700 μs

Coil-contacts 2500 Vp 2500 Vp 5600 Vp / IMC 4200 Vp 2500 Vp 4000 Vp 2500…6000 Vp 1500 Vp 1500 Vp 1500 Vp 2500 Vp 1500 Vp 1500 Vp 1500 VpOpened contacts 1500…2500 Vp 1500 Vp 3500 Vp / IMC 1500 Vp 2500 Vp 2500 Vp 1500...2500 Vp 1500 Vp 1500 Vp 1500 Vp 1000 Vp 1000 Vp 1000 VpAdjacent contacts 1500…2500 Vp 1500 Vp 2000 Vp 2500 Vp 1500...2500 Vp 1500 Vp 1500 Vp 1500 Vp

RF characteristicsat 100 MHz / 900 MHz / 3 GHz

Isolation -37.0 dB / -18.8 dB -37.0 dB / -18.8 dB -33.0 dB / - 13.5 dB -39.0 dB / -20.7 dB -34.0 dB / -15.1 dB -30.6 dB / -13.7 dB -40.2 dB / -22.3 dB -39.0 dB / -20.7 dB -31.8 dB / -14.2 dB -30.0 dB / -18.0 dB -80 dB / -72 dB / -45 dB -95 dB / -80 dB / -55 dB -80 dB / -60 dB / -30 dBInsertion loss -0.03 dB / -0.33 dB -0.03 dB / -0.33 dB -0.06 dB / -1.00 dB -0.02 dB / -0.27 dB -0.03 dB / -0.60 dB -0.02 dB / -0.50 dB -0.03 dB / -0.25 dB -0.02 dB / -0.27 dB -0.02 dB / -0.97 dB -0.12 dB / -1.90 dB -0.03 dB / 0.12 dB / -0.35 dB -0.03 dB / -0.12 dB / -0.30 dB -0.05 dB / -0.15 dB / -0.80 dBV:S:W:R: 1.06 / 1.49 1.06 / 1.49 1.10 / 2.00 / IMC 1.04 / 1.33 1.04 / 1.40 1.07 / 1.45 1.02 / 1.27 1.01 / 1.07 1.04 / 1.40 1.03 / 1.31 1.06 / 1.75 1.05 / 1.15 / 1.20 1.05 / 1.10 / 1.25 1.05 / 1.10 / 1.40

Capacitance between opened contacts max. 1 pF max. 1 pF max. 1 pF max. 1 pF max. 2 pF max. 1 pF max. 1 pF max. 2 pF max. 1 pF max. 5 pF max. 2 pF max. 1 pF max. 1 pF on request max. 1 pF max. 1 pF max. 1 pFGeneral DataAmbient temperature -40 to +85 °C (125 °C ) -40 to +85 °C -40 to +85 °C -40 to +85 °C -55 to +85 °C -55 to +125 °C -55 to +85 °C -25 to +85 °C -55 to +85 °C -40 to +70 °C -40 to +70 °C -20 to +70 °C -20 to +70 °C -40 to +70 °C -55 to +85 °C -55 to +85 °C -55 to +85 °CSealing IP67 / RT V IP67 / RT V IP67 / RT V IP67 / RT III IP67 / RT V IP67 / RT III / RT V IP67 / RT III IP67 / RT III IP67 / RT III IP67 / RT III IP67 / RT III IP67 / RT III IP67 / RT III IP30 or RT I or RT III IP67 / RT III IP67 / RT III IP67 / RT IIITermination THT, SMT THT, SMT THT, SMT THT, SMT THT THT, SMT THT THT THT THT, SMT THT THT THT THT or plug in SMT SMT SMTDimensions 10 x 6 x 5.65 mm 10 x 6 x 5.65 mm 10 x 6 x 5.65 mm 14.5 x 7.2 x 10.4 mm 15 x 7.3 x 10.7 mm 15 x 7.5 x 9.6 mm 14 x 9 x 5 mm 20 x 10 x 11 mm 20 x 10 x 11 mm 13 x 7.6 x 6.9 mm 15.6 x 10.6 x 11.5 mm 19.3 x 5.7 x 7.5 mm 19.8 x 5.1 x 7.8 mm 24…35 x 19 x 30 mm 14.6 x 7.2 x 10 mm 15 x 7.6 x 10.6 mm 15 x 7.6 x 10.6 mmCertifications cULus, Telcordia, IEC 60950 cULus, Telcordia, IEC 60950 cULus, Telcordia, IEC 60950 cULus, Telcordia, IEC 60950 cULus, Telcordia, IEC 60950 cULus, Telcordia, IEC 60950 cULus, IEC 60950

Tyco Electronics Relays & Switches from AXICOM, OEG, Potter & Brumfield and SCHRACK

Telecom-Signal and RF Relays / Switches

All specifications subject to change. Consult Tyco Electronics for latest specifications • http://relays.tycoelectronics.com • http://www.tycoelectronics.comAXICOM, OEG, Potter & Brumfield, SCHRACK, TE Logo and Tyco Electronics are trademarks

© 2008 Tyco Electronics Ltd. • 1308219-2 Revised 11-2008 5M WR

RoHSReady

Automotive Relays and Switching ModulesTyco Electronics AMP GmbHPaulsternstr. 32 • 13629 Berlin / GermanyProduct Information Center:Phone: +49-(0)30-38638-775E-Mail: [email protected]

General Purpose RelaysTyco Electronics Austria GmbHPilzgasse 33 • A-1210 Wien / Austria Product Information Center:Phone: +49-(0)30-38638-775E-Mail: [email protected]

Telecom-Signal and RF Relays / SwitchesTyco Electronics Logistics AGSeestrasse 295 • CH-8804 Au / Switzerland

Phone: +41-(0)44-782 91 11E-Mail: [email protected]

1) Recommended minimum load indication for contact material: Au and gold plated: 1 mA at 6 V; Ag, AgNi0,15 and AgNi90/10: 10 mA at 12 V; AgCdO and AgSnO2: 100 mA at 12 V; Please contact technical support for detailed technical data.

1) Recommended minimum load indication for contact material: Au and gold plated: 1 mA at 6 V; Ag, AgNi0,15 and AgNi90/10: 10 mA at 12 V; AgCdO and AgSnO2: 100 mA at 12 V; Please contact technical support for detailed technical data.

* for reference only, contact application support for details.

relay selection guide

Documents

detailed technical

sealing termination

white goods

limiting continuous

clearance

contact technical

forcibly guided

pin assignment