remote control keys v2 · 4 a30.1 / i30 5 d20 / d30.2 6 pre30 7 t21 / t22 / t30 8 sp31.7 / spa20 9...

1

Remote Control Keys V2.2February 2010

AutorBjorn HolmqvistPrimare AB

2

Product:

Page Model

3 A20 / I20 / I21

4 A30.1 / I30

5 D20 / D30.2

6 Pre30

7 T21 / T22 / T30

8 SP31.7 / SPA20

9 SP31 / SPA21

10 V10, V20, V25

11 DVD30

13 P30

14 DVD26

16 CD21 /CD31

17 Delay Box

18 T23

20 CDi10

22 DVDi10

24 SPA22/SP32

26 History

3

A20 / I20 / I21 Remote Control Commands.

RC5 address = 20 (0x14)bits:0x0500 = 0000 0101 0000 0000 (=1280) xxxx tsss ssdd dddd(s ssss = 1 0100 = 0x14 = 20)

x=not usedt=toggle bits=system bits (address)d=command (VALUE below)

short press (default) = 1 command.long press = 3 consecutive identical commands

Key Dec. Value Hex. Value Actionstandby 12 (0x0c) Standby ON (common)standby 1 (0x01) Standby ON (unique)operate 2 (0x02) Operate (Standby OFF)step up 30 (0x1e) Next inputstep down 31 (0x1f) Previous inputinput mode 26 (0x1a) Toggle input mode (balance, master volume)mute 49 (0x31) Toggle mute on/offplus 16 (0x10) Increase/change master volume and balanceminus 17 (0x11) Decrease/change master volume and balancedim 10 (0x0a) Toggle display on/off1 60 (0x3c) Used for main input selection2 61 (0x3d) Used for main input selection3 62 (0x3e) Used for main input selection4 63 (0x3f) Used for main input selection

For complete command, just add system address value 1280 with key value 1 (for standby) = 1281(0x0501).

4

A30.1 / I30 Remote Control Commands.




Note !. Commands in Red Require Firmware update for use on A30.1 and some I30.

Key Dec. Value Hex. Value Actionstandby 12 (0x0c) Standby ON (common) (with d20/d30))standby 1 (0x01) Standby ON (unique)operate 2 (0x02) Operate (Standby OFF)step up 30 (0x1e) Next inputstep down 31 (0x1f) Previous inputinput mode 26 (0x1a) Toggle input mode (balance, master volume)mute 49 (0x31) Toggle mute on/offplus 16 (0x10) Increase/change master volume and balanceminus 17 (0x11) Decrease/change master volume and balancedim 10 (0x0a) Toggle display on/off1 60 (0x3c) Used for main input selection2 61 (0x3d) Used for main input selection3 62 (0x3e) Used for main input selection4 63 (0x3f) Used for main input selection5 3 (0x03) Used for main input selection6 4 (0x04) Used for main input selection

For complete command, just add system address value 1280 with key value 12 (for standby) = 1292(0x050c).

5

D20/D30.2 Remote Control Commands.




Key Dec. Value Hex. Value ActionOpen 45 (0x2d)play 53 (0x35) play/pausestop 54 (0x26)standby 12 (0x0c) long press = Standby ON, any other key = Operateoperate 58 (0x3a)dim 10 (0x0a)next_track 32 (0x20)ff 52 (0x34)prev_track 33 (0x21)rew 50 (0x32)plus10 47 (0x2f)time 11 (0x0b)a_b 59 (0x3b)repeat 29 (0x1d)mem 41 (0x29)1 13 (0x0d)2 14 (0x0e)3 15 (0x0f)4 18 (0x12)5 19 (0x13)6 20 (0x14)7 21 (0x15)8 22 (0x16)9 23 (0x17)0 24 (0x18)check 25 (0x19)clear 27 (0x1b)shuffle 28 (0x1c)intro 34 (0x22)auto_space 35 (0x23)play2 36 (0x24) only playpause 37 (0x25) only pauseFor complete command, just add system address value 1792 with key value 50 (for standby) = 1842(0x0732).

6

Pre30 Remote Control Commands.




Key Dec. Value Hex. Value Actionstandby 50 (0x32) Standby ONstep up 30 (0x1e) Next input (surround/record/main)step down 31 (0x1f) Previous input (surround/record/main)input level 38 (0x26) toggle input mode (input level/master volume)balance 26 (0x1a) toggle input mode (balance, master volume)mute 49 (0x31) Toggle mute on/offplus 16 (0x10) Increase/change master volume, balance, input levelminus 17 (0x11) Decrease/change master volume, balance, input leveldim 10 (0x0a) Toggle display on/offmode 42 (0x2a) Toggle surround mode on/offrecord 48 (0x30) Toggle input mode record input path/main input pathoperate 58 (0x3a) Operate (Standby OFF)select 43 (0x2b) Reserved1 13 (0x0d) Used for main input selection2 14 (0x0e) Used for main input selection3 15 (0x0f) Used for main input selection4 18 (0x12) Used for main input selection5 19 (0x13) Used for main input selection6 20 (0x14) Used for main input selection7 21 (0x15) Used for main input selection8 22 (0x16) Used for main input selection9 23 (0x17) Used for main input selection0 24 (0x18) Used for main input selection10 47 (0x2f) Used for main input selection


7

T21 / T22 / T30 Remote Control Commands.




Key Dec. Value Hex. Value Actionoperate 1 (0x01) Operate (Standby OFF / STANDBY ON?)display 2 (0x02)preset/tune 3 (0x03)antenna 4 (0x04)blend 5 (0x05)if 6 (0x06)mono 7 (0x07)scan up 8 (0x08)scan down 9 (0x09)preset 1 10 (0x0a)preset 2 11 (0x0b)preset 3 12 (0x0c)preset 4 13 (0x0d)preset 5 14 (0x0e)preset 6 15 (0x0f)preset 7 16 (0x10)preset 8 17 (0x11)preset 9 18 (0x12)store 19 (0x13)preset up 20 (0x14)preset down 21 (0x15)dim 22 (0x16)

For complete command, just add system address value 1024 with key value 1 (for operate) = 1025 (0x0401).

8

SP31.7 / SPA20 Remote Control Commands.

RC5 address = 28 (0x1c)bits:0x0700 = 0000 0111 0000 0000 (=1792) xxxx tsss ssdd dddd(s ssss = 1 1100 = 0x1c = 28)


short press (default) = 1 command.long press = 3 consecutive identical commandsKey Dec. Value Hex. Value Actionstandby 50 (0x32) long press = Standby ONoperate 58 (0x3a) Operate (Standby OFF)step up 16 (0x10) In menus: previous row

Other: Next inputstep down 17 (0x11) In menus: next row

Other: Previous inputinput mode 26 (0x1a) toggle input mode (balance, center, side, rear, sub, master)mute 49 (0x31) Toggle mute on/offplus 30 (0x1e) In menus: menucommand "next"

Other: Increase/change master volume, balance, center, side,rear, sub

minus 31 (0x1f) In menus: menucommand "previous"Other: Decrease/change master volume, balance, center,side, rear, sub

dim 10 (0x0a) Toggle display on/offmenu 38 (0x26) In menus: short press = previous menu

long press = leave menusOther: Enter menus

mode 42 (0x2a) Next surround mode for 2ch inputsselect 43 (0x2b) In menus: menucommand "next"record 48 (0x30) Next input for record path

(This command does not exist on SPA20)1 13 (0x0d) Used for main input selection2 14 (0x0e) Used for main input selection3 15 (0x0f) Used for main input selection4 18 (0x12) Used for main input selection5 19 (0x13) Used for main input selection6 20 (0x14) Used for main input selection7 21 (0x15) Used for main input selection8 22 (0x16) Used for main input selection9 23 (0x17) Used for main input selection0 24 (0x18) Used for main input selection10 47 (0x2f) Used for main input selectionFor complete command, just add system address value 1792 with key value 50 (for standby) = 1842(0x0732).

9

SP31 / SPA21 Remote Control commands.



short press (default) = 1 command.long press = 3 consecutive identical commandsKey Dec. Value Hex Value Actionstandby 50 (0x32) Toggle Standby/Operateoperate 58 (0x3a) Operate (Standby OFF)standby 59 (0x3b) Standby (Standby ON)step up 16 (0x10) In menus: previous row

Other: Next inputstep down 17 (0x11) In menus: next row

Other: Previous inputinput mode 26 (0x1a) toggle input mode (balance, center, side, rear, sub, master)mute 49 (0x31) Toggle mute on/offplus 30 (0x1e) In menus: menucommand "next"

Other: Increase/change master volume, balance, center, side,rear, sub

minus 31 (0x1f) In menus: menucommand "previous"Other: Decrease/change master volume, balance, center,side, rear, sub

dim 10 (0x0a) Toggle display on/offmenu 38 (0x26) In menus: short press = previous menu

long press = leave menusOther: Enter menus

mode 42 (0x2a) Next surround mode for 2ch inputsselect 43 (0x2b) In menus: menucommand "next"record 48 (0x30) Next input for record path

(This command does not exist on SPA21)1 13 (0x0d) Used for main input selection2 14 (0x0e) Used for main input selection3 15 (0x0f) Used for main input selection4 18 (0x12) Used for main input selection5 19 (0x13) Used for main input selection6 20 (0x14) Used for main input selection7 21 (0x15) Used for main input selection8 22 (0x16) Used for main input selection9 23 (0x17) Used for main input selection0 24 (0x18) Used for main input selection10 47 (0x2f) Used for main input selectionFor complete command, just add system address value 1792 with key value 50 (for standby) = 1842(0x0732).

10

V10 / V20 / V25 Remote Control commands.NEC system (32 bits)

SYSTEM CODE: 00FEH

Key Dec. Value Hex. Value ActionOpen 65 0x41Power 93 0x5DMute 73 0x49Goto 77 0x4DMenu 85 0x55Title 88 0x581 64 0x402 68 0x443 80 0x50Audio 92 0x5C4 72 0x485 76 0x4C6 84 0x54Angle 27 0x1B7 3 0x038 7 0x079 19 0x13Subtitle 31 0x1F0 15 0x0FSubtitle_On 26 0x1ASetp 2 0x02Repeat 18 0x12Repeat_AB 30 0x1ESlow- 10 0x0ASlow+: 14 0x0EProgram 22 0x16Clear 28 0x1CDisplay 0 0x00Zoom 4 0x04Setup 16 0x10Return 24 0x18Play 8 0x08Stop 20 0x14Up 5 0x05Down 13 0x0DLeft 1 0x01Right 25 0x19Rew 69 0x45Ff 9 0x09Prev 21 0x15Next 29 0x1DPower_Off (unique): 11 0x0B (Note! only for V25 with newer software)Power_On (unique): 23 0x17 (Note! only for V25 with newer software)Dimmer 89 0x59Select 17 0x11

11

DVD30 Remote Control Keys

Remote Control commands.




Key Dec. Value Hex. Value ActionSTOP 0 0x00FF 1 0x01REW 2 0x02SKIP+ 3 0x03SKIP- 4 0x04PLAY 5 0x05PAUSE 6 0x06OPEN/CLOSE 7 0x07POWER ON/OFF 8 0x08JOG FWD 0 9 0x09JOG FWD 1 10 0x0AJOG FWD 2 11 0x0BJOG FWD 3 12 0x0CJOG REV 0 13 0x0DJOG REV 1 14 0x0EJOG REV 2 15 0x0FJOG REV 3 16 0x10VNR (picture adjust) 17 0x11POWER ON 18 0x12POWER OFF 19 0x13SUBTITLE 23 0x17CURSOR LEFT 24 0x18CURSOR RIGHT 25 0x19CURSOR UP 26 0x1ACURSOR DOWN 27 0x1BFUNCTION MEMORY 28 0x1CCONDITION MEMORY 29 0x1DLAST MEMORY 30 0x1EMULTISPEED FWD 1 31 0x1FMULTISPEED FWD 2 32 0x20

12

MULTISPEED REV 1 33 0x21MULTISPEED REV 2 34 0x22STEP/SLOW FWD 35 0x23STEP/SLOW REV 36 0x240 37 0x251 38 0x262 39 0x273 40 0x284 41 0x295 42 0x2A6 43 0x2B7 44 0x2C8 45 0x2D9 46 0x2E+10 47 0x2FSETUP 48 0x30MENU 49 0x31TOPMENU 50 0x32DISPLAY (osd) 51 0x33SEARCHMODE 52 0x34ANGLE 53 0x35AUDIO 54 0x36REPEAT 55 0x37REPEAT A-B 56 0x38RANDOM 57 0x39CLEAR 58 0x3APROGRAM 59 0x3BENTER 60 0x3CRETURN 61 0x3DDIMMER 62 0x3EPLAY/PAUSE 63 0x3F

13

P30 Remote Control commands.



Key Dec. Value Hex. Value Actionstandby 39 (0x27) Standby ONstep up 30 (0x1e) In menus: menucommand "next"

Other: Next inputstep down 31 (0x1f) In menus: menucommand "previous"

Other: Previous inputinput mode 26 (0x1a) In menus: short press = previous menu

long press = leave menusshort press = toggle input mode (balance, center, rear, sub,master)Other long press = enter menus

mute 12 (0x0c) Toggle mute on/offplus 16 (0x10) In menus: previous row

Other: Increase/change master volume, balance, center, rear,sub

minus 17 (0x11) In menus: next rowOther: Decrease/change master volume, balance, center,rear, sub

dim 10 (0x0a) Toggle display on/offmenu 38 (0x26) Enter/leave menus


14

DVD26 Remote Control Keys

Remote Control commands.




Key Dec. Value Hex. Value ActionSTOP 0 0x00FF 1 0x01REW 2 0x02SKIP+ 3 0x03SKIP- 4 0x04PLAY 5 0x05PAUSE 6 0x06OPEN/CLOSE 7 0x07POWER ON/OFF TOGGLE 8 0x08POWER ON 18 0x12POWER OFF 19 0x13SUBTITLE 23 0x17CURSOR LEFT 24 0x18CURSOR RIGHT 25 0x19CURSOR UP 26 0x1ACURSOR DOWN 27 0x1BRESUME ON/OFF 29 0x1DSLOW FWD 1 31 0x1FFRAME FWD 2 32 0x20SLOW REW 1 33 0x21FRAME REW 2 34 0x220 37 0x251 38 0x262 39 0x273 40 0x284 41 0x295 42 0x2A6 43 0x2B7 44 0x2C8 45 0x2D

15

9 46 0x2E+10 47 0x2FSETUP 48 0x30TITLE MENU 49 0x31TOPMENU 50 0x32DISPLAY (osd) 51 0x33SEARCHMODE (goto) 52 0x34ANGLE 53 0x35AUDIO 54 0x36REPEAT 55 0x37REPEAT A-B 56 0x38RANDOM 57 0x39CLEAR 58 0x3APROGRAM 59 0x3BENTER 60 0x3CRETURN 61 0x3DDIMMER 62 0x3EPLAY/PAUSE TOGGLE 63 0x3F

16

CD21 / CD31 Remote Control Commands.




Key Dec. Value Hex. Value ActionOpen 45 (0x2d)Play/Pause (Toggle) 53 (0x35)stop 54 (0x26)standby (Toggle) 12 (0x0c)standby (Unique) 57 (0x39)operate (Unique) 58 (0x3a)dim 10 (0x0a)next_track 32 (0x20)ff 52 (0x34)prev_track 33 (0x21)rew 50 (0x32)plus10 47 (0x2f)time 11 (0x0b)a_b 59 (0x3b)repeat 29 (0x1d)Mem 41 (0x29)1 13 (0x0d)2 14 (0x0e)3 15 (0x0f)4 18 (0x12)5 19 (0x13)6 20 (0x14)7 21 (0x15)8 22 (0x16)9 23 (0x17)0 24 (0x18)shuffle 28 (0x1c)intro 34 (0x22)play2 (only Play) 36 (0x24)pause (only Pause) 37 (0x25)


17

Delay Box Remote Control commands.




Key Dec. Value Hex. Value ActionStandby 1 (0x01) Standby ONOperate 2 (0x02) Standby OffStandby 12 (0x0c) Toggle Standby/OperateUp 3 (0x03) Increasing delay timeDown 4 (0x04) Decreasing delay timeInput 1 5 (0x05) Used for main input selection.Input 2 6 (0x06) Used for mail input selectionPreset 1 7 (0x07) Delaytime memory 1Preset 2 8 (0x08) Delaytime memory 2Bypass 9 (0x09) Enable bypass mode.Dim 10 (0x0A) Toggle DIM Mode


18

T23 Remote Control Commands.




Due to compability reasons command , 4, 5, 6 should not be used.

Key Dec. Value Hex. Value ActionOperate / Standby 1 (0x01) (Toggle)Display 2 (0x02) (Shifts between RDS info)Mono / Auto 3 (0x07) toggle (in DAB-mode, enter menu)FM Manual Tune UPDAB service +,menu +

8 (0x08) (long press search up)

FM Manual Tune DownDAB service -,menu -

9 (0x09) (long press search down)

Preset 1 (direct) 10 (0x0a)Preset 2 (direct) 11 (0x0b)Preset 3 (direct) 12 (0x0c)Preset 4 (direct) 13 (0x0d)Preset 5 (direct) 14 (0x0e)Preset 6 (direct) 15 (0x0f)Preset 7 (direct) 16 (0x10)Preset 8 (direct) 17 (0x11)Preset 9 (direct) 18 (0x12)Preset 0 24 (0x18)Store (mem) 19 (0x13)Preset +10 23 (0x17)Clear 29 (0x1D)Preset UP (DAB/FM) 20 (0x14)Preset Down (DAB/FM) 21 (0x15)Dim toggle 22 (0x16) (toggle between DIM-modes)Standby Mode Off (unique) 25 (0x19)Standby mode On (unique) 26 (0x1A)FM Search up 27 (0x1B)FM Search down 28 (0x1C)Select 30 (0x1E)Auto, default 31 (0x1F) (in FM, enable auto-shift

stereo/mono), (unique)Mono 32 (0x20) (in FM, enable mono mode), (unique)

19

Toggle DAB / FM mode 33 (0x21)DAB mode (unique) 34 (0x22)FM mode (unique) 35 (0x23)


20

Cdi10 Remote Control KeysRC5 address = 14 (0x0e)bits:0x0380 = 0000 0011 1000 0000 (=896) xxxx tsss ssdd dddd(s ssss = 0 1110 = 0x0e = 14)



Key Dec. Value Hex Value ActionStandby 8 0x08 Standby toggle1 38 0x262 39 0x273 40 0x284 41 0x295 42 0x2A6 43 0x2B7 44 0x2C8 45 0x2D9 46 0x2EClear 58 0x3A0 37 0x25+10 47 0x2FVolume - 29 0x1DArrow up 26 0x1AVolume + 30 0x1EArrow Left 24 0x18 In FM Tune DownSelect 60 0x3CArrow Right 25 0x19 In FM Tune UPstop 0 0x00Arrow Down 27 0x1BPlay/Pause toggle 63 0x3FDIM 62 0x3EMode 54 0x36 In FM toggle mono/Auto. In DAB mode toggle tuning alternatives.Display 51 0x33 In FM toggle FM/RDS information. In DAB mode toggle DAB

information / Text.Open 7 0x07Skip back 4 0x04 In CD skip back, In FM Search DownMem 23 0x17Skip Forward 3 0x03 In CD Skip Forward, In FM Search UPREW 2 0x02Repeat 55 0x37FF 1 0x01IN1 17 0x11 Direct input selectionIN2 20 0x14 Direct input selection

21

IN3 21 0x15 Direct input selectionIN4 (front) 22 0x16 Direct input selectionCD 12 0x0C Direct input selectionDAB/FM (toggle) 13 0x0DOperate (uniqe) 18 0x12 Standby mode offOFF (unique) 19 0x13 OFF mode onStandby (unique) 16 0x10 Standby mode ONPause 6 0x06 only pausePlay 5 0x05 only playRepeat a-b 56 0x38Resume on/off 35 0x23Dab 14 0x0E Direct input selectionFM 15 0x0F Direct input selection

22

DVDi10 Remote Control Commands.

RC5 address = 18 (0x12)bits:0x0480 = 0000 0100 1000 0000 (=1152) xxxx tsss ssdd dddd(s ssss = 1 0010 = 0x12 =18)



Function Dec. Value Hex Value ActionStandby(toggle) 8 0x08

1 38 0x262 39 0x273 40 0x284 41 0x295 42 0x2A6 43 0x2B7 44 0x2C8 45 0x2D9 46 0x2E

Clear 58 0x3A0 37 0x25

+10 47 0x2FVolume - 29 0x1DArrow up 26 0x1AVolume + 30 0x1EArrow Left 24 0x18

Select 60 0x3CArrow Right 25 0x19Stop/Open 0 0x00

Arrow Down 27 0x1BPlay/Pause (toggle) 63 0x3F

Menu 49 0x31DIM 62 0x3E

Mode 54 0x36Display 51 0x33Setup 48 0x30Skip - 4 0x04MEM 59 0x3BSkip + 3 0x03REW 2 0x02

Repeat 55 0x37FF 1 0x01

Goto 52 0x34

23

Angle 53 0x35Topmenu 50 0x32Subtitle 23 0x17

DVD 12 0x0CFM 15 0x0F

DAB/AM 13 0x0Dipod 16 0x10IN1 17 0x11IN2 20 0x14IN3 21 0x15IN4 22 0x16

Operate (uniqe) 18 0x12Standby (unique) 19 0x13

Open 7 0x07Pause 6 0x06Play 5 0x05

Repeat a-b 56 0x38Resume on/off 35 0x23

Slow FWD1 31 0x1FFrame FMD2 32 0x20Slow REW1 33 0x21

Frame REW2 34 0x22Return 61 0x3D

Dab 14 0x0EAm 11 0x0B

Random 57 0x39

24

SP32/SPA22 Remote Control Commands




IR Dec. Value Hex. Value DescribtionStandby toggle 50 0x32 Toggle standbyStandby ON 59 0x3B Standby ONOperate 58 0x3A Standby OFFStep-UP 16 0x10 Next main input / prev row in menusStep Down 17 0x11 Previous main input / next row in menusInput mode(balanced) 26 0x1A Balance / Center / Surr / Surr back / Sub / Master -volume toggle

Mute 49 0x31 Mute On / OffPlus 30 0x1E Volume +Minus 31 0x1F Volume -Dim 10 0x0A DIM On / OffMenu 38 0x26 Menu / Menu-back / Menu exitMode 42 0x2A Next surround mode for 2ch inputsSelect 43 0x2B Menu command + (select)0 24 0x18 Direct input access1 13 0x0D Direct input access2 14 0x0E Direct input access3 15 0x0F Direct input access4 18 0x12 Direct input access5 19 0x13 Direct input access6 20 0x14 Direct input access7 21 0x15 Direct input access8 22 0x16 Direct input access9 23 0x17 Direct input access+10 47 0x2F Direct input accessZone II Volume + 32 0x20 Increase Zone II volumeZone II Volume - 33 0x21 Decrease Zone II volumeZone II Mute 34 0x22 Mute Zone2 outputZone II input + 48 0x30 Next Zone II inputZone II input - 36 0x24 Prevoius Zone II inputZone II input 1 2 0x02 Zone II input directZone II input 2 3 0x03 Zone II input direct

25

Zone II input 3 4 0x04 Zone II input directZone II input 4 5 0x05 Zone II input directZone II input 5 6 0x06 Zone II input directZone II input 6 7 0x07 Zone II input directZone II input 7 8 0x08 Zone II input directZone II input 8 9 0x09 Zone II input directZone II input 9 12 0x0C Zone II input directZone II input 0 1 0x01 Zone II input directZone II input +10 11 0x0B Zone II input direct

26

History

V16Added: DVD-30, Sp31 (new model)V25 codes corrected.Date / revision number added to first page.

V17Updated DVD-30 codes

V18Added: I30, I21 DVD-26, CD21, CD31, DelayboxMinor error corrections (Text & layout).Primare Logo changed

V19Changed to SP31 / SPA21, Removed “new model”.Bugs in SPA21 / SPA20 list corrected “record path”Bugs in DVD-26 corrected “Random, “serchmode”

V20Added T22 and T23, added SPA21 on the first page.Added Cdi10.

V2.1Changed version system to X.X, because of confusion with Primare V20 DVD-playerAdded DVDi10 and SP32/SPA22Fixed various errors in system address describtions

V2.2Added all Hex. Values.

remote control keys v2 · 4 a30.1 / i30 5 d20 / d30.2 6 pre30 7 t21 / t22 / t30 8 sp31.7 / spa20 9...

Documents