Applications

▪ Fornewbuildandrefurbishmentprojects

▪ CanbeusedinconjunctionwiththeSwisspanEWI systemorasarenderonlysolution

▪ Asimulatedbrickfinishthatcanmatchexisting brickworkorcreateneweffectsanddetails

▪ Appliedin2coats

Performance

▪ Fullywarrantedsystemwith30yeareffectivelife whenusedwithSwisslab&SwisspanEWIsystems

▪ Weatherresistant,whilstremainingvapour permeable

▪ Protectsthestructuralfabricofthebuildingfrom environmentaldeterioration

▪ Durableandlightweight

▪ Increasedbondstrengthwhencomparedtosand andcement

▪ Highlyresistanttoimpactdamage

Technical & Project Support

▪ Sitesurveys,detaildesignmeetings,project specificelevationcolourschemes,CADdrawings andproductsamples,tenantinvolvement programmes

▪ Detailedprojectspecificationsandhealthand safetyandproductdatasheets

▪ Thermalcalculations,condensationriskanalysis andwindloadingcalculations(forhighrise projects)

Installation & Aftercare

▪ InstalledbyfullytrainedAlumascregistered contractors

▪ On-sitesupportfromAlumasc’steamofSite Technicians

▪ Aftercarerecommendationsanddocumentation

▪ Fullpackageofwarrantyoptions• Warranties

AlumascoffersacomprehensiverangeofwarrantyoptionsfortheSwisthermExternalWallInsulationsystemincluding25yearECOandGreenDealwarranties.InstalledexclusivelybyAlumascRegisteredContractorsandunderpinnedbyAlumasc’sextensiveprojectsupportservice.IndependentinsurancebackedlatentproductdefectwarrantiesarealsoavailablethroughFSAlicensedbrokers.

• When to Specify

Rendabrickisaspeciallyformulatedpolymerrenderwhichsimulatestheappearanceofbrickwork.ItcanbeusedinconjunctionwiththeAlumascexternalwallinsulation(EWI)systems,Swisslab&Swisspan,orasarenderonlysolution.

Fullelevationscanincorporatetheproductoritcanbeusedforbanding,coinsorgeneralfeatures,suppliedinarangeofdifferentcoloursforbothbrickandmortar.

ALUMASCEXTERIORBUILDINGPRODUCTSLTD

Ref:SS-SL-0813Page1of2

The Company pursues a policy of constant product development and information contained within this datasheet is therefore subject to change without notice. The customer is responsible for ensuring that each product is fit for its intended purpose and that the conditions for use are suitable. All quoted data is nominal and subject to production tolerances.

AlumascRendabrickBrickEffectRenderSystem

Coverage Rates

BaseCoat=2.5m2@8mmper25kgbag

TopCoat=7m2@3-4mmper25kgbag

▪ Solid Masonry Substrate

▪ Powder Coated, Galvanised Aluminium or Stainless Steel Beading

▪ M.R. Bedding Adhesive (usedtoadhereinsulationslab)

▪ Alumasc Insulation(choiceofinsulationslabavailable)

▪ Approved Mechanical Fixing

▪ M.R. Scrim Adhesive (usedasareinforcinglayer)

▪ Alkali-resistant Glassfibre Scrim (beddedintoM.R.ScrimAdhesive)

▪ M.R. Rendabrick Base Coat (colouredtodesiredmortarcolour)

▪ M.R. Rendabrick Top Coat (colouredtorepresentbrick)

Typical System Components

ALUMASCEXTERIORBUILDINGPRODUCTSLTD

Ref:SS-SL-0813Page2of2

The Company pursues a policy of constant product development and information contained within this datasheet is therefore subject to change without notice. The customer is responsible for ensuring that each product is fit for its intended purpose and that the conditions for use are suitable. All quoted data is nominal and subject to production tolerances.

CERTIFICATE No 93/2914

Rendabrick Application

▪ RendabrickBaseCoatisapplied,typicallytoacuredM.R.ScrimAdhesive layer,at8mmminimumandallowedto’pickup’butnotcure

▪ TheRendabricktopcoatisthenappliedtotheRendabrickBaseCoatat 3-4mmandtexturedwithaspongeorbrushdependingondesiredeffect.

▪ OncetheRendabrickTopCoathas‘pickedup’butnotcured,theTop Coatiscarefullysetout,markedandcutbackusingaspeciallydesigned cuttingtool

▪ TheBaseCoatisexposed,resultinginarealisticbrickfinish

▪ Carefulattentiontothesettingoutofthecoursesandfeaturesis necessary

Project Support & Advice: Contact Alumasc Technical Services

01744648400 facades@alumasc-exteriors.co.uk www.alumascfacades.co.uk

Available Finishes

AlumascRendabrickBrickEffectRenderSystem