rental of equipment trucks statewide - louisiana€¦ · rental of equipment trucks statewide....
TRANSCRIPT
Contract Number: 4400009665 T-Number: 92900
Vendor Contact John Christian Alternate Vendor ContactRobin Blanset
Vendor Phone (205) 241-3217 Alternate Vendor Phone (205) 241-3180
Vendor Email [email protected] Alternate Vendor Email [email protected]
Vendor Name Global Rental Company Inc. City, State, Zip Code Birmingham, AL 35234
Vendor Address 1730 Vanderbilt Rd Vendor Number 310043008
Vendor Information
Rental of Equipment Trucks Statewide
Weekly Monthly
Altec TA41M
Telescopic material handler aerial device with a 45' working
height. $1,919.00 $3,636.00
Altec AT37G
Telescopic personnel carrier aerial device with a 42' working
height on a 19,500 GVWR 4X2 chassis. $1,616.00 $3,131.00
Altec AT40G
Telescopic personnel carrier aerial device with a 45' working
height on a 19,500 GVWR 4X2 chassis. $1,717.00 $3,333.00
Altec AT40M
Telescopic material handler aerial device with a 45' working
height on a 19,500 GVWR 4X2 chassis. $1,818.00 $3,434.00
Altec AA55
Articulating material handler with a 60' working height on a
33,000 GVWR 4X2 chassis. $2,020.00 $4,141.00
Altec DM47 47' digger derrick on a 4X2 chassis. $2,121.00 $4,242.00
Altec DC47 47' digger derrick on a 4X2 chassis. $2,121.00 $4,242.00
Altec D3060 60' digger derrick on a 6X6 chassis. $2,323.00 $6,666.00
Altec HD35A Pressure digger with a 22' or 30' digging depth. $3,333.00 $9,595.00
Spiradrill LHD
Short mast pressure digger with a 22', 35', or 50' digging
depth. $4,242.00 $12,625.00
Area Charge
A $0.00
B $0.00
C $0.00
D $100.00
E $0.00
F $0.00
G $0.00
I $0.00
L $0.00
Digger Derrick
Pressure Digger
Delivery & Pickup Charges
(refer to attached map)
Rental Term
DescriptionModelTruck Type
Bucket
State of Louisiana Regional Map
TAM SeriesTelescopic Material Handlers
• 4-Function Single Handle Upper Control
• Working Height up to 60.6 ft (18.5 m)
• Side Reach up to 34.3 ft (10.5 m)
• Material Handling Capacity to 850 lb (386 kg)
• Elevator and Compensating Articulating Arms Maximize Reach and Height Capability
Altec Sales and Service
Sales – 800-958-2555
Service – 877-GO-ALTEC (877-462-5832)
Manufacturing and Service Facilities Located Throughout the United States and Canada
www.altec.com
Altec Industries, Inc.
Post Office Box 10264Birmingham, Alabama 35202
Phone 205/991-7733Fax 205/991-9993
TAM SeriesSpecifications
ALT3001130
STAndArd FeATureS• AltecISO-Grip® System• FiberglassUpperBoom&LowerBoomInsulator• InsulatedAerialDevice• CentrifugallyCastFiberglassUpperBoom• HydraulicallyExtendibleBoom• MaterialHandlingSystemwithHydraulicallyArticulatingJib• ContinuousRotation• Platform,24x30x42in(610x762x1067mm)• HydraulicPlatformRotationandTilt• FullPressure,ClosedCenterHydraulicSystem• 90 RotationPlatform• ModifiedA-FrameOutriggers• Back-upAlarm• OutriggerMotionAlarm• OutriggerBoomInterlockSystem
AltecAerialDevicesmeetorexceedallapplicableANSIStandardsasofthedateofmanufacture.Altecreservestherighttoimprovemodelsandchangespecificationswithoutnoticeorobligation
reCOMMended FeATureS• PlatformLiner• FallProtectionSystem
• WheelChocks• OutriggerPads
OPTIOnS
• SecondaryStowageSystem,12VDC
• RemoteEngineStart/Stop• Holder:ChainSaw• Holder:Pruner• LiftingEyeonLowerBoom
• TransverseorLongitudinalElevator Mounts Available
• PlatformCover• ThrottleControl• ToolCircuitatTailshelf• HydraulicallyExtendibleJib
Compact Boom TipOpen Bed Space Superior Reach
TAM Series-2.5M-3/10
GenerAL SPeCIFICATIOnS
Model Ground to Bottom of Platform* Working Height*
Reach From Centerline of Vehicle
@ Platform HeightTravel
Height*Platform Capacity
TA37M 37.3 ft 11.4 m 42.0 ft 12.8 m 27.3 ft @ 17.4 ft 8.4 m @ 5.3 m 11.9 ft 3.6 m 400 lb 181 kgTA41M 40.9 ft 12.5 m 45.8 ft 13.9 m 30.5 ft @ 17.3 ft 9.3 m @ 5.3 m 11.9 ft 3.6 m 350 lb 159 kgTA41M-T46 46.2 ft 14.1 m 51.2 ft 15.6 m 34.3 ft @ 21.5 ft 10.5 m @ 6.6 m 12.1 ft 3.7 m 350 lb 159 kgTA41M-L46 46.2 ft 14.1 m 51.2 ft 15.6 m 30.6 ft @ 21.5 ft 9.3 m @ 6.6 m 12.1 ft 3.7 m 350 lb 159 kgTA41M-L51 52.0 ft 15.8 m 57.0 ft 17.4 m 30.6 ft @ 27.4 ft 9.3 m @ 8.4 m 13.0 ft 4.0 m 350 lb 159 kgTA45M 44.5 ft 13.6 m 49.5 ft 15.1 m 30.5 ft @ 20.9 ft 9.3 m @ 6.4 m 11.6 ft 3.5 m 350 lb 159 kgTA45M-T50 49.8 ft 15.2 m 54.8 ft 16.7 m 34.3 ft @ 25.2 ft 10.5 m @ 7.7 m 11.7 ft 3.6 m 350 lb 159 kgTA45M-L50 49.8 ft 15.2 m 54.8 ft 16.7 m 30.7 ft @ 25.2 ft 9.4 m @ 7.7 m 11.7 ft 3.6 m 350 lb 159 kgTA45M-L55 55.6 ft 16.9 m 60.6 ft 18.5 m 30.7 ft @ 31.0 ft 9.4 m @ 9.4 m 12.6 ft 3.9 m 350 lb 159 kg* Based on 40 in (1016 mm) Chassis Frame Height
Altec AT35-G/AT37-GTelescopic/Articulating
Aerial Devices
• Altec ISO-Grip® Control System
• Up to 42.5 ft (13.0 m)Working Height
• Up to 28.3 ft (8.6 m)Side Reach
• Platform Capacity to400 lb (181 kg)
• Easily Mounted on 17,500 lb (7937.9 kg) GVWR Chassis –No Outriggers Required
GENERAL SPECIFICATIONS AT35-G AT37-G
Ground to Bottom of Platform* 36.1 ft 11.0 m 37.8 ft 11.5 m (at Distance From Centerline) 11.3 ft 3.4 m 11.3 ft 3.4 m
Maximum Reach End-Mount 28.3 ft 8.6 m 28.3 ft 8.6 m Side-Mount 26.6 ft 8.1 m 26.6 ft 8.1 m (@ Platform Height) 12.7 ft 3.9 m 14.4 ft 4.4 m
Stowed Travel Height 10.0 ft 3.0 m 10.0 ft 3.0 m
Boom Articulation Lower Boom -25 to +75
Articulation Arm -7 to +90
Rotation Noncontinuous 370
Weight of Unit 2110 lb 957 kg 2160 lb 980 kg
*Based on 40 inch (1016 mm) Chassis Frame Height
Manufacturing and Service Facilities Located Throughout the United States and Canada
www.altec.com
Altec Industries, Inc.Post Office Box 10264
Birmingham, Alabama 35202Phone 205/991-7733
Fax 205/408-8051
[email protected] – 800-958-2555Service – 877-GOALTEC
AT35-G/AT37-G-3M-01/09ALT2001019
Altec AT35-G/AT37-G Specifications
REACH DIAGRAM
STANDARD FEATURES
• AltecISO-Grip® System• Telescopic/ArticulatingAerialDevice• CompensatedArticulatingArm• HydraulicBoomExtension• Insulated,ANSICategoryC,46kVandBelow• NoncontinuousRotation• Platform,24x24x42in(610x610x1067mm)Nominal• HydraulicPlatformLeveling• PlatformCapacity–350lb(159kg)Fixed 350 lb (159 kg) w/ Rotator• FullyMeteredSingleHandleUpperControl• FullPressure,OpenCenterHydraulicSystem• PlatformAccessfromtheGround• EmergencyLoweringValve• ToolCircuitatPlatform• Back-upAlarm• OutriggerBoomInterlockSystem(WithOutriggerOption)• OutriggerMotionAlarm(WithOutriggerOption)
AltecAerialDevicesmeetorexceedallapplicableANSIStandardsasof thedateofmanu-facture.Altecreservestherighttoimprovemodelsandchangespecificationswithoutnoticeor obligation.
RECOMMENDED FEATURES
• FallProtectionSystem• PlatformLiner• WheelChocks
• WithOutriggerOption: Outrigger Pads
• AdditionalPlatformCapacity• PlatformCover• PlatformRotator-90 or 180• Platform,24x30x42in
(610 x 762 x 1067 mm)
OPTIONS
• ContinuousRotation• SecondaryStowageSystem• EngineStart/Stop• ToolCircuitatTailshelf• Outriggers,Vertical
Boom Tip CoversEasy Access From Ground
AT
40
G
TELESCOPIC ARTICULATINGAERIAL DEVICE
FOR NEW EQUIPMENT SALES, CALL
800.958.2555TO SPEAK WITH AN ALTEC REPRESENTATIVEor visit us online at altec.com
AT40GFEATURES
OPTIONS
N E W E Q U I P M E N T S A L E S | 8 0 0 . 9 5 8 . 2 5 5 5 | S A L E S @ A L T E C . C O M | A L T E C . C O M
SPEC
IFIC
ATIO
NS
Ground to Bottom of Platform* (at Reach from Centerline)
40.6 ft (12.4 m) 10.9 ft (3.3 m)
Working Height 45.6 ft (13.9 m)
Maximum Side Reach (at Platform Height)
29.7 ft (9.1 m) 15.2 ft (4.6 m)
Platform Capacity 400 lb (181.4 kg)
Platform Dimensions (End-Mount)
24 x 30 x 42 in (610 x 762 x 1,067 mm)
Articulating Arm Articulation -5 to 79°
Upper Boom Articulation -25 to 75°
Stowed Travel Height 10.3 ft (3.1 m)
Rotation Continuous
Weight of Machine** 2,543 lb (1,153 kg)
*Based on a 40 in (1016 mm) chassis frame height. ** Weight does not include mounting frame or outriggers.
For more complete information on Altec products and services, visit us on the web at www.altec.com. Material and specifications are subject to change without notice. Featured units in photos may include optional features. Please contact an Altec representative for all available options. Altec® and the Altec logo are registered trademarks of Altec Inc. in the United States and various other countries and may not be used without permission. © 2015 Altec Inc. All Rights Reserved. AIOSAT40G-0315-v1
REACH DIAGRAM
• Telescopic Articulating Aerial Device
• Compensated Articulating Arm
• Hydraulic Boom Extension
• Altec ISO-Grip® Control System
• Low Power Fiber Optic Control System
• Fully Metered 4-Function, Single-Handle Upper Control
• Platform Access from Ground
• Composite Platform Mounting Bracket
• Insulating, ANSI Category C
• Hydraulic Plaform Leveling System
• Emergency Lowering Valve at Platform
• Platform Leveling at Upper and Lower Controls
• 180° Platform Rotator
• Tool Circuit at Platform
• Open-Center Hydraulic System
• Easily Mounted on 19,500 lb (8,845 kg) GVWR Chassis
• Outrigger Boom Interlock System (with Outrigger Option)
• Outrigger Motion Alarm (with Outrigger Option)
• Back Up Alarm
• ISO-Boom Offering ANSI Category C Isolation with Boom Retracted
• Outriggers, Vertical
• Hybrid Adaptation Available with Standard Electronic Systems
• Secondary Stowage
• Engine Start/Stop
• Platform Cover
• Tool Circuit at Tailshelf
• 24 x 24 x 42 in (610 x 610 x 1067 mm) Platform
Recommended safety equipment, available through Altec Supply, include a platform liner, fall protection system, wheel chocks and outrigger pads (with outrigger option).
INCREASED SIDE REACH 29.7 FT (9.1 M)
INCREASED WORKING HEIGHT 45.6 FT (13.9 M)
ISO-BOOM OPTION FOR ADDED DIELECTRIC INTEGRITY
FIBER OPTIC CONTROLS WITH FEWER HOSES AND VALVES
AT
40
M/P
TELESCOPIC ARTICULATINGAERIAL DEVICE
FOR NEW EQUIPMENT SALES, CALL
800.958.2555TO SPEAK WITH AN ALTEC REPRESENTATIVEor visit us online at altec.com
AT40M/PFEATURES OPTIONS
N E W E Q U I P M E N T S A L E S | 8 0 0 . 9 5 8 . 2 5 5 5 | S A L E S @ A L T E C . C O M | A L T E C . C O M
For more complete information on Altec products and services, visit us on the web at www.altec.com. Material and specifications are subject to change without notice. Featured units in photos may include optional features. Please contact an Altec representative for all available options. Altec® and the Altec logo are registered trademarks of Altec Inc. in the United States and various other countries and may not be used without permission. © 2015 Altec Inc. All Rights Reserved. AIOSAT40MP-0315-v1-r1
REACH DIAGRAM
ISO-BOOMOffers category C isolation with fiberglass upper boom retracted.
ALLOWS EASY ACCESS TO PLATFORM FROM GROUND
BODY COMPARTMENT ACCESS FROM PLATFORM
LOWER ARMTo rise above and telescope over obstacles.
CONFIGURATIONS AT40M
SPEC
IFIC
ATIO
NS
Ground to Bottom of Platform* 39.4 ft (12.0 m) 39.4 ft (12.0 m)
Working Height* 44.4 ft (13.5 m) 44.4 ft (13.5 m)
Maximum Side Reach (at Platform Height)
29.6 ft (9.0 m) 16.5 ft (5.0 m)
29.6 ft (9.0 m) 16.5 ft (5.0 m)
Stowed Travel Height* 11.1 ft (3.4 m) 11.1 ft (3.4 m)
Upper Boom Isolation Gap 40 in (1,016 mm) 40 in (1,016 mm)
Articulating Arm Isolation Gap 9.5 in (241 mm) 9.5 in (241 mm)
Platform Capacity 400 lb (181.4 kg) 400 lb (181.4 kg)
Platform Dimensions 24 x 30 x 42 in (610 x 762 x 1,066.8 mm)
24 x 30 x 42 in (610 x 762 x 1,066.8 mm)
Lower Boom Articulation -25 to 75° -25 to 75°
Articulating Arm Articulation -3 to 74° -3 to 74°
Rotation Continuous Continuous
*Based on a 40 in (1016 mm) chassis frame height.
AT40P
General Specifications Key:The Letter ‘M’ in the Model Name Indicates the Material Handling Configuration.The Letter ‘P’ in the Model Name Indicates the Personnel Configuration.
• Altec ISO-Grip® Control System
• 4-Function, Single Handle Upper Control
• Insulating, ANSI Category C
• Compensated Articulating Arm
• Fiberglass Upper Boom and Lower Boom Insulator
• Hydraulic Boom Extension
• Platform Access from Ground
• Hydraulic 180° Platform Rotation with Platform Tilt
• Full-Pressure, Open-Center Hydraulic System
• Outrigger Motion Alarm and Outrigger Interlocks
• Emergency Stop Valves at all Upper and Lower Control Stations
• Easily Mounted on 19,500 lb (8,845 kg) GVWR Chassis
• Tool Circuit at Platform
• ISO-Boom Offering ANSI Category C Isolation with Boom Retracted
• Altec ARM Jib Offering Jib Capacities up to 800 lb (362.9 kg)
• Side Mount Jib
• 2-Man Platform with 180° Plaform Rotation and 600 lb (272.2 kg)
Plaform Capacity (AT40P Only)
• Secondary Stowage System
• Engine Start/Stop
• Second Tool Circuit at Platform
• Tool Circuit Below Rotation
• Manual Throttle
• Jib Adapter
• Phase Lifting Jib Attachment
• Platform Cover
Recommended safety equipment, available through Altec Supply, include a platform liner, fall protection system, wheel chocks and outrigger pads.
Altec AA Series Non-Overcenter Aerial Device
• 120 Degree Lower Boom Articulation (Extended Reach Only)
• Side Reach of 46.8 ft (14.3 m) (Extended Reach Only)
• Working Height to 65.1 ft (19.8 m)
• Access to Ground in the Non-Overcenter Position (Extended Reach Only)
• Hydraulic Upper Boom Compensation Provides Smooth & Productive Operation
Altec Industries, Inc.Post Office Box 10264
Birmingham, Alabama 35202Phone 205/991-7733
Fax 205/991-9993
Altec Sales and Service
Manufacturing and Service Facilities Located Throughout the United States and Canada
www.altec.comALT1018424AA Series-3M-7/09
Altec Aerial Devices meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifications without notice or obligation.
Altec AA Series Specifications
REACH DIAGRAMS
OPTIONS
• Automatic Upper Boom Stow System• Engine Start/Stop• Remote Secondary Stowage System• Jib Adapter• Phase Lifting Jib Attachment• One 2-Man Platform• 180 Degree Rotator, End Hung, Personnel Only Platform
STANDARD FEATURES
• Platform Leveling System – Chain and Rod in Upper Boom• Lower Boom Non-Overstow Protection System• Hydraulic Platform Tilt• Material Handling System with Hydraulic Extend Jib• Altec ISO-Grip® Control System• Outrigger Motion Alarm• Outrigger Boom Interlock System• Electric/Hydraulic Outrigger Controls• Back-Up Alarm• Powder Coat Painted Prior to Assembly• Two Sets of Hydraulic Tool Circuits at Each Platform• Diagnostic Pressure Test Quick Disconnect Couplings• Continuous Rotation• Hydraulic Platform Rotators (if so equipped)• Emergency Stop Valves at all Upper and Lower Control Stations• Pilot Pressure System
RECOMMENDED FEATURES
• Fall Protection System• Platform Liner• Wheel Chocks• Outrigger Pads
GENERAl SPECIFICATIONSAA50 AA55 AA60 AA50E AA55E AA60E AA60E
Ground to Bottom of Platform 50.1 ft (15.3 m) 55.1 ft (16.8 m) 60.1 ft (18.3 m) 50.1 ft (15.3 m) 55.1 ft (16.8 m) 60.1 ft (18.3 m)
Working Height* 55.1 ft (16.8 m) 60.1 ft (18.3 m) 65.1 ft (19.8 m) 55.1 ft (16.8 m) 60.1 ft (18.3 m) 65.1 ft (19.8 m)
Maximum Reach from Centerline of Rotation to Lip of Platform
34.6 ft (10.5 m) 37.7 ft (11.5 m) 40.8 ft (12.4 m) 39.1 ft (11.9 m) 43.1 ft (13.1 m) 46.8 ft (14.3 m)
Height at Bottom of Platform at Maximum Reach
27.5 ft (8.4 m) 29.2 ft (8.9 m) 31.2 ft (9.5 m) 24.7 ft (7.5 m) 26.6 ft (6.3 m) 28.1 ft (8.6 m)
Stowed Travel Height (approx)
11.5 ft (3.5 m) 11.5 ft (3.5 m) 11.5 ft (3.5 m) 11.5 ft (3.5 m) 11.5 ft (3.5 m) 11.5 ft (3.5 m)
Platform Capacity up to 700 lb (318 kg) up to 700 lb (318 kg) up to 700 lb (318 kg) up to 700 lb (318 kg) up to 700 lb (318 kg) up to 700 lb (318 kg)
Jib Capacity (max) 2000 lb (909 kg) 2000 lb (909 kg) 2000 lb (909 kg) 2000 lb (909 kg) 2000 lb (909 kg) 2000 lb (909 kg)
Lower Boom Articulation, degrees
0 to 105 0 to 105 0 to 105 0 to120 0 to120 0 to120
Upper Boom Articulation, degrees
0 to 173 0 to 173 0 to 173 0 to 173 0 to 173 0 to 173
Rotation Continuous Continuous Continuous Continuous Continuous Continuous
*Based on 40 in (1016 mm) Chassis Frame Height
DM
SE
RIE
S
DIGGER DERRICK
FOR NEW EQUIPMENT SALES, CALL
800.958.2555TO SPEAK WITH AN ALTEC REPRESENTATIVEor visit us online at altec.com
DM SERIES
FEATURES OPTIONS
N E W E Q U I P M E N T S A L E S | 8 0 0 . 9 5 8 . 2 5 5 5 | S A L E S @ A L T E C . C O M | A L T E C . C O M
For more complete information on Altec products and services, visit us on the web at www.altec.com. Material and specifications are subject to change without notice. Featured units in photos may include optional features. Please contact an Altec representative for all available options. Altec® and the Altec logo are registered trademarks of Altec Inc. in the United States and various other countries and may not be used without permission. © 2015 Altec Inc. All Rights Reserved. AIOSDM-0315-v1
• 5-Function Hydraulic Overload Protection System (HOP)• Hydraulic Side Load Protection• Boom and Auger Stow Protection System• Hydraulically Extending Full Capacity Fiberglass Upper Boom• Fiberglass Boom Tip and Transferable Steel Boom Flares• Insulating, ANSI Category C Rating• 15,000 lb (6,803.9 kg) Capacity Turntable Winch with Rope/
Cable Guides• Hydraulic Tilting Pole Guides with Pole Guide Interlock• Outrigger Controls with Motion Alarms• Outrigger Boom Interlock System• Operator Main Control Panel with Multi-Lever Controls• Emergency Stop Switch on Main Control Panel(s)• Back Up Alarm
• Behind-the-Cab Mount• Corner Mount• Boom Tip Winch• High Speed 12,000 lb (5,443.1 kg) Winch• Altec Opti-View® Riding Seat• Engine Foot Throttle• Three-Position Throttle Switch• Control and Platform Covers• Radio Remote Main Control Panel• Radio Remote Upper Controls• Four-Lever Upper Controls• Single or Dual Platform• Altec RotaFloat® • Altec Electronic Side Load Protection (ESLP)• Derrick OSHA Compliance Package• Tool Circuit or Hose ReelRecommended safety equipment, available through Altec Supply, include a platform
liner, fall protection system, wheel chocks and outrigger pads.
The Altec “B” Series incorporates a high-flow piston pump into the hydraulic system. This variable displacement pump generates a maximum actual flow of 43 GPM, compared to a standard derrick vane pump which provides actual flow of 38 GPM. The higher flow, combined with an improved valve design, optimizes multi-function performance and increase productivity. Other benefits of the Altec “B” Series Derrick include simultaneous 4-function boom operation, 50% reduction of heat generation during heavy digging, 20% reduction of heat generation during continuous winch operation and reduced fuel consumption.
SPEC
IFIC
ATIO
NS
Maximum Sheave Height* (Both Booms Extended)
44.4 ft (13.5 m) 46.4 ft (14.2 m) 49.4 ft (15.1 m)
Intermediate Boom Extended, Upper Boom Retracted 36.5 ft (11.5 m) 38.5 ft (11.8 m) 40.2 ft (12.2 m)
Both Booms Retracted 27.9 ft (8.4 m) 29.8 ft (9.1 m) 30.5 ft (9.3 m)
Horizontal Reach from Centerline of Rotation (Both Booms Extended)
35.3 ft (10.8 m) 37.3 ft (11.4 m) 40.3 ft (12.3 m)
Intermediate Boom Extended, Upper Boom Retracted 27.3 ft (8.3 m) 29.3 ft (8.9 m) 31.0 ft (9.4 m)
Both Booms Retracted 18.5 ft (5.6 m) 20.5 ft (6.2 m) 21.2 ft (6.5 m)
Intermediate Boom Extension 8.8 ft (2.7 m) 8.8 ft (2.7 m) 9.8 ft (3.0 m)
Upper Boom Extension 8.0 ft (2.4 m) 8.0 ft (2.4 m) 9.3 ft (2.8 m)
Maximum Lift Capacity (10 ft Bare Boom)
13,394 lb (6,077 kg) 12,902 lb (5,852 kg) 12,451 lb (5,648 kg)
Maximum Lift Capacity (10 ft with Auger, Pole Guides and Upper Controls)
12,120 lb (5,497 kg) 11,570 lb (5,248 kg) 11,090 lb (5,030 kg)
Boom Articulation -20 to 80° -20 to 80° -20 to 80°
Digger Radius (min - max) 16.0 ft (4.8 m) - 24.8 ft (7.5 m) 17.9 ft (5.5 m) - 26.7 ft (8.1 m) 18.7 ft (5.7 m) - 28.5 ft (8.7 m)
Rotation (with High Capacity Worm Drive Gearbox)
Continuous Continuous Continuous
*Based on a 40 in (1016 mm) chassis frame height. ANSI A10.31-2006 Compliant
CONFIGURATIONS DM45 DM47 DM50
RADIO REMOTE CONTROLS BOOM TIP WINCH SIDE LOAD GAUGE OPTI-VIEW® SEAT
Altec DCFull-Pressure Derrick
• Pole Setting Sheave Height to 46.5 ft (14.2m)• Capacities to 30,000 lbs (13,608 kg)• Capacity at 10' to 12,970 lbs (5,883 kg)
GENERAL SPECIFICATIONSDC45 DC47
Maximum Lift Capacity 30,000 lb 13,608 kg 30,000 lb 13,608 kg
Maximum Capacity at 10' Radius (Without Options)
12,940 lb 5869 kg 12,430 lb 5638 kg
Pole Setting Sheave Height 44.4 ft 13.5 m 46.4 ft 14.2 m
Reach from Centerline of Rotation 35.0 ft 10.6 m 37.0 ft 11.3 m
Dig radius from Centerline of RotationMinimumMaximum
16.024.8
ftft
4.87.5
mm
17.926.7
ftft
5.58.1
mm
Boom Articulation, degrees 20 to 80 20 to 80
Rotation Continuous Continuous
Travel Height, approximate* 11.6 ft 3.5 m 11.6 ft 3.5 m
* Based on chassis frame height of 40 inches (1016 mm) per ANSI A10.31-1995.
Altec DC Specifications
STANDARD FEATURES
Manufacturing and Service Facilities Located Throughout the United States and Canada
www.altec.com
Altec Industries, Inc.Post Office Box 10264
Birmingham, Alabama 35202Phone 205/991-7733
Fax 205/[email protected]
Altec Sales and Service
ALT3005010DC Derrick-1M-3/11
Altec Digger Derricks meet or exceed all applicable ANSI Standards as of the date of manufacture. Altec reserves the right to improve models and change specifica-tions without notice or obligation.
RECOMMENDED FEATURES
OPTIONS
•BehindCabMount•BoomTipWinch•HighSpeed(12,000lbs)Winch•EngineFootThrottle•ControlandPlatformCovers•Platform•HydraulicUpperControls
•FallProtectionSystem•PlatformLiner•WheelChocks•OutriggerPads
•HydraulicallyExtendingFullCapacityFiberglassUpper Boom
•ContinuousRotationwithHighCapacityWormDriveGearbox
•OutriggerControlswithMotionAlarmsandToolCircuit at Tailshelf
•OperatorMainControlPanelwithMulti-LeverControls
•EmergencyStopSwitchonMainControlPanel(s)•FiveFunctionHydraulicOverloadProtectionSystem•HydraulicSideLoadandBoomStorageProtection
Systems•15,000lbsCapacityTurntableWinchwithRope/
Cable Guides•FiberglassBoomTipandTransferableSteelFlares
for Pole Setting
•HydraulicallyTiltingPoleGuideswithPoleGuideInterlock
• InsulatedperANSI“46kVandbelow”DielectricRating
•AltecProportionalControlSystem•PaintedWhitewiththeAltecPowderCoatPaint
Process•DesignedandManufacturedinFacilitiesCertifiedto
ISO 9001•OutriggerBoomInterlockSystem•BackUpAlarm•TraditionalControlSeat
D30
00
SE
RIE
S
DIGGER DERRICK
FOR NEW EQUIPMENT SALES, CALL
800.958.2555TO SPEAK WITH AN ALTEC REPRESENTATIVEor visit us online at altec.com
D3000B SERIES
FEATURES OPTIONS
N E W E Q U I P M E N T S A L E S | 8 0 0 . 9 5 8 . 2 5 5 5 | S A L E S @ A L T E C . C O M | A L T E C . C O M
• 5-Function Hydraulic Overload Protection System (HOP) • Hydraulic Side Load Protection (HSLP) with Load Sense • Boom Stow Protection System • Full Capacity Fiberglass Upper Boom • Fiberglass Boom Tip and Transferable Steel Boom Flares • Insulating, fiberglass third stage with 46kV and below rating• Hydraulic Tilting Pole Guides with Pole Guide Interlock • Outrigger Boom Interlock System • Operator Main Control Panel with Multi-Lever Controls • Emergency Stop Switch on Main Control Panel(s)
• Radio Remote Upper Controls• Mechanical Shift and Hydra-Sync Two-Speed Augers• Altec RotaFloat®• Fiberglass Material or Personnel Handling Jib• Altec OptiView® Riding Seat• Single or Dual Platforms• High Speed 12,000 lb Winch • Altec Electronic Side Load Protection (ESLP)• Radio Remote Main Control Panel• Right-Hand or Left-Hand Auger Storage
Recommended safety equipment, available through Altec Supply, includes a platform liner, fall protection system, wheel chocks and outrigger pads.
SPEC
IFIC
ATIO
NS
Maximum Sheave Height* (Both Booms Extended)
49.6 ft (15.1 m) 54.5 ft (16.6 m) 59.5 ft (18.2 m)
Intermediate Boom Extended, Upper Boom Retracted 40.4 ft (12.3 m) 45.4 ft (13.8 m) 47.0 ft (14.3 m)
Both Booms Retracted 30.8 ft (9.3 m) 33.2 ft (10.1 m) 34.0 ft (10.4 m)
Horizontal Reach from Centerline of Rotation (Both Booms Extended)
40.2 ft (12.2 m) 45.3 ft (13.8 m) 50.3 ft (15.3 m)
Intermediate Boom Extended, Upper Boom Retracted 30.8 ft (9.4 m) 36.0 ft (11.0 m) 37.6 ft (11.5 m)
Both Booms Retracted 20.8 ft (6.3 m) 23.6 ft (7.2 m) 24.5 ft (7.5 m)
Intermediate Boom Extension 10.0 ft (3.0 m) 12.3 ft (3.8 m) 13.2 ft (4.0 m)
Upper Boom Extension 9.3 ft (2.8 m) 9.3 ft (2.8 m) 12.7 ft (3.9 m)
Maximum Lift Capacity (10ft bare boom)
15,837 lb (7,184 kg) 15,000 lb (6,804 kg) 15,000 lb (6,804 kg)
Boom Articulation -15 to 80° -15 to 80° -15 to 80°
Digger Radius (min - max) 18.7 ft (5.7 m) - 28.5 ft (8.7 m) 21.2 ft (6.5 m) - 33.5 ft (10.2 m) 22.0 ft (6.7 m) - 35.2 ft (10.7 m)
Rotation Continuous Continuous Continuous
*Based on a 40 in (1016 mm) chassis frame height. ANSI A10.31-2006 Compliant
CONFIGURATIONS D3050B D3055B D3060B
The Altec “B” series derrick provides a flexible control system to fit any customer’s needs. The system incorporates a high-flow variable displacement pump and generates a maximum flow of 43 GPM. Because flow is provided by a single variable displacement piston pump, maximum flow is available to any function for superior multi-functioning which includes 4-function boom operation. Additional benefits of the “B” series derrick is 50% reduction of heat generation during heavy digging, 20% reduction of heat generation during continuous winch operation and reduced fuel consumption.
SIDE LOAD GAUGEThe side load indicator gauge can give operators advanced warning of potential loading hazards.
RADIO REMOTE CONTROLSThe radio unit can be used as upper controls without running mechanical controls to the boom tip, allowing a greater boom capacity and smaller working envelope.
OPTI-VIEW® CONTROL SEATThe Altec Opti-View® Control Seat increases operator comfort and provides a full view of the work area.
D3000H SERIES
FEATURES OPTIONS
N E W E Q U I P M E N T S A L E S | 8 0 0 . 9 5 8 . 2 5 5 5 | S A L E S @ A L T E C . C O M | A L T E C . C O M
• 5-Function Hydraulic Overload Protection System (HOP) • Hydraulic Side Load Protection (HSLP) with Load Sense • Boom Stow Protection System • Full Capacity Fiberglass Upper Boom • Fiberglass Boom Tip and Transferable Steel Boom Flares • Insulating, fiberglass third stage with 46kV and below rating• Hydraulic Tilting Pole Guides with Pole Guide Interlock • Outrigger Boom Interlock System • Operator Main Control Panel with Multi-Lever Controls • Emergency Stop Switch on Main Control Panel(s)
• Full-View T-Handle Riding Seat• Mechanical Shift and Hydra-Sync Two-Speed Augers• Altec RotaFloat®• Fiberglass Material or Personnel Handling Jib• High Speed 12,000 lb Winch • Right-Hand or Left-Hand Auger Storage
Recommended safety equipment, available through Altec Supply, includes a platform liner, fall protection system, wheel chocks and outrigger pads.
SPEC
IFIC
ATIO
NS
Maximum Sheave Height* (Both Booms Extended)
49.6 ft (15.1 m) 54.5 ft (16.6 m) 59.5 ft (18.2 m)
Intermediate Boom Extended, Upper Boom Retracted 40.4 ft (12.3 m) 45.4 ft (13.8 m) 47.0 ft (14.3 m)
Both Booms Retracted 30.8 ft (9.3 m) 33.2 ft (10.1 m) 34.0 ft (10.4 m)
Horizontal Reach from Centerline of Rotation (Both Booms Extended)
40.2 ft (12.2 m) 45.3 ft (13.8 m) 50.3 ft (15.3 m)
Intermediate Boom Extended, Upper Boom Retracted 30.8 ft (9.4 m) 36.0 ft (11.0 m) 37.6 ft (11.5 m)
Both Booms Retracted 20.8 ft (6.3 m) 23.6 ft (7.2 m) 24.5 ft (7.5 m)
Intermediate Boom Extension 10.0 ft (3.0 m) 12.3 ft (3.8 m) 13.2 ft (4.0 m)
Upper Boom Extension 9.3 ft (2.8 m) 9.3 ft (2.8 m) 12.7 ft (3.9 m)
Maximum Lift Capacity (10ft bare boom)
15,837 lb (7,184 kg) 15,000 lb (6,804 kg) 15,000 lb (6,804 kg)
Boom Articulation -15 to 80° -15 to 80° -15 to 80°
Digger Radius (min - max) 18.7 ft (5.7 m) - 28.5 ft (8.7 m) 21.2 ft (6.5 m) - 33.5 ft (10.2 m) 22.0 ft (6.7 m) - 35.2 ft (10.7 m)
Rotation Continuous Continuous Continuous
*Based on a 40 in (1016 mm) chassis frame height. ANSI A10.31-2006 Compliant
CONFIGURATIONS D3050H D3055H D3060H
The Altec “H” Series derrick is a fully hydraulic derrick that incorporates a high-flow piston pump into the hydraulic system. The variable displacement pump generates a maximum flow of 43 GPM. Because flow is provided by a single variable displacement piston pump, maximum flow is available to any function for superior multi-functioning which includes 4-function boom operation. Additional benefits of the “H” series derrick is 50% reduction of heat generation during heavy digging, 20% reduction of heat generation during continuous winch operation and reduced fuel consumption.
SIDE LOAD GAUGEThe side load indicator gauge can give operators advanced warning of potential loading hazards.
CLEAN SIDE OF THE BOOMThe riding seat side of the boom has not obstructions so that the operator has clear view of the boomtip.
FULL-VIEW RIDING SEATThe standard single handle riding seat comes with an open front, full-view seat that provides superior multi-functioning through the use of the “T-style” handle and best-in-class ingress, egress and boomtip visibility.
210 Inverness Center DriveBirmingham, AL 35242Fax 205.449.4774www.altec.com
For more complete information on Altec products and services, visit us on the web at www.altec.com.
© 2016 Altec IncAll Rights Reserved
Material and specifications are subject to change without notice. Featured units in photos may include optional features. Please contact an Altec representative for all available options. Charts published herein are intended to be a guide only and should not be construed to warrant application for lifting purposes. Consult supplied operation manual for further details.
Altec® and the Altec logo are registered trademarks of Altec Inc in the United States and various other countries and may not be used without permission.
AIOSD3000BH-0816-v1
Altec HD35APressure Digger
• DiggingDepthsto30ft(9.1m)
• ContinuousDiggingCapacityof72in(1830mm)Dia.Hole
• HighPerformanceInertiaDriveSystem
• ErgonomicWorkStation
• Field-Proven
Altec Sales and Service Altec Industries, Inc.
Post Office Box 10264Birmingham, Alabama 35202
Phone 205/991-7733Fax 205/991-9993
Altec HD35A Specifications
STANDARD FEATURES
ALT3004121HD35A-3M-4/08
Manufacturing and Service Facilities Located Throughout the United States and Canadawww.altec.com
OPTIONS• PoleSetterwith8000lb(3630kg)Capacity• PoleSetterwith3700lb(1678kg)Capacity• ToolHandlerwith3700lb(1678kg)
Capacity• HydraulicToolCircuit• 100gal(378.5L)WaterTank• AugerStands• MaterialStorageBox• AvailableMountingonTrackUnits• Outriggers,A-FrameonRear,ModifiedA
on Front• OutriggerInterlocks
• Non-InsulatedPressureDigger• JohnDeere6-cycleDiesel155Hp
(115.6kW)• DriveTorqueto30,000ft-lb(40,675N.m)• ContinuousDiggingCapacityto72in
(1830mm)Dia.• VariableSpeedDriveSystemto160RPM• 3.5in(90mm)SquareKellyBarforIn-
creasedResistancetoBending• MastLeveling,20toLeft,RightandRear• Set-UpMastWithoutPaying-OutWinch
Line
• 240Rotation• MainDiggerFrameExtendsandRetracts
36in(914mm)• SubbaseMountingfor120in(3048mm)
Chassis• RamCylinderExtendForceto35,640lb
(16,167kg)• ToolStorageandDropPocket• 50gal(189.3L)FuelTankCapacity• LowMastWorkingHeightAvailablefor
Distribution Units*
AltecIndustries, Inc.reservestheright to improvemodelsandchangespecificationswithoutnoticeorobligation.AltecAerialDevicesmeetorexceedallapplicableANSIStandardsasofthedateofmanufacture.
GENERAL SPECIFICATIONSHD35A-10 HD35A-12 HD35A-17 HD35A-22 HD35A-30*
NominalDiggingDepth 10 ft 3.0 m 12 ft 3.74 m 17 ft 5.2 m 22 ft 6.7 m 30 ft 9.1 m
LowestOverallWorking Height*** Mast/Pole-Setter Retracted
20.6 ft 6.3 m 21.8 ft 6.6 m 27.6 ft 8.4 m 32.6 ft 9.9 m 40.6 ft 12.4 m
Maximum Sheave Height ** Fixed Length Pole-Setter
N/A N/A 26.8 ft 8.2 m 31.8 ft 9.7 m N/A
Maximum Sheave Height ** TelescopicPole-Setter
27.8 ft 8.5 m 29.8 ft 9.1 m 34.8 ft 10.6 m 39.8 ft 12.1 m N/A
**30FootDiggerDoesNotIncludePoleSettingAbility**Basedona40in(1016mm)ChassisFrameHeight