rental rates 2019 - wheeler cat...mini excavators dayweek 4-week 300.9 2,170 lbs., 5’ 6” dig...

wheelercat.com/rental-equipment | 801-908-8900

RENTAL RATES 2019

801-908-8900 | wheelercat.com/rental-equipment

WHO WE ARE:Wheeler Machinery Co. provides an extensive fleet of well maintained, low-hour construction machinery, water trucks, power equipment, GPS, lasers and work tools.

THE WHEELER ADVANTAGE:• Caterpillar and other preferred brands

• Experienced, responsive customer service

• Competitive pricing

• Day, week and 4-week rental options

• Fast delivery to customer job sites

• 24-hour emergency service

PHONE:(801) 908-8900

Day = 8 hrsWeek = 40 hrs4-Week = 176 hrs

SALT LAKE CITY(801) 908-8900

LOGAN(435) 994-3404

OGDEN(801) 732-9100

LINDON(801) 796-0999

VERNAL(435) 789-0635

SALINA(435) 529-7423

CEDAR CITY(435) 267-1201

HURRICANE(435) 251-8448

ELY, NV(775) 289-2466

RENTAL LOCATIONS


Air Compressors / Air Hammers 17

Articulated Trucks 11

Asphalt Paving Equipment 14-15

Asphalt Rollers 14

Backhoe Loaders 9

Compact Track Loaders 9

Compressed Air 29-30

Crack Sealer 15

Crushers & Screens 22-25

Crushing & Screening Insurance 25

Customer Insurance 21

Dozers 7

Electrical Distribution 28-29

Excavators 5-6

Freight & Standby Charges 18

Generators 24-26

Hydraulic Excavators 5-6

Light Compaction Equipment 16

Light Towers 17

Milling Machines 15

Mini Excavators 5

Motor Graders 8

Off-Highway Trucks 11

On-Highway Dump Trucks 12

Pavers 14-15

Pneumatic Rollers 14

Power Systems Products 26-31

PRODUCTS & SERVICES LIST A-Z

PSD Insurance Requirements 31

Pumps 16

Rammers 16

Rental Equipment Protection 19

Rental Terms & Conditions 20

Reversible Vibratory Plates 16

Scrapers 8

Self-Propelled Brooms 15

Skid Steer Loaders 10

Soil Compactors 13

Telescopic Handlers (Telehandlers) 8

Track Drills 11

Track Loaders 11

Track-Type Tractors 7

Trailers 17

Trench Shields 17-18

Vibratory Plates 16

Vibratory Rollers 13

Wheel Loaders 4

Wheeled Excavators 7

Water Equipment 12

2019 RENTAL EQUIPMENT LIST

PAGE

4


WHEEL LOADERS DAY WEEK 4-WEEK

903C 0.8 yd GP Bucket, 9,150 lbs. $321 $931 $2,700906M 1.0 yd GP Bucket, 12,346 lbs. $416 $1,207 $3,500908M 1.4 yd GP Bucket, 14,032 lbs. $464 $1,345 $3,900 910M 1.6 yd GP Bucket, 17,893 lbs. $547 $1,586 $4,600914M 1.8 yd GP Bucket, 19,315 lbs. $595 $1,724 $5,000918M 2.5 yd GP Bucket, 21,082 lbs. $642 $1,862 $5,400926M 3.0 yd GP Bucket, 28,770 lbs. $642 $1,862 $5,400926M (coupler & forks) 3.0 yd GP Bucket, 31,270 lbs. $702 $2,034 $5,900930M 3.2 yd GP Bucket, 31,363 lbs. $737 $2,138 $6,200930M (coupler & forks) 3.2 yd GP Bucket, 33,379 lbs. $797 $2,310 $6,700938M 3.5 yd GP Bucket, 36,216 lbs. $844 $2,448 $7,100938M (coupler & forks) 3.5 yd GP Bucket, 38,716 lbs. $904 $2,621 $7,600950 GC 4.4 yd GP Bucket, 41,554 lbs. $927 $2,690 $7,800950 GC (coupler & forks) 4.4 yd GP Bucket, 44,226 lbs. $999 $2,897 $8,400950M 4.5 yd GP Bucket, 42,357 lbs. $1,082 $3,138 $9,100950M (coupler & forks) 4.5 yd GP Bucket, 45,029 lbs. $1,153 $3,345 $9,700962M 5.0 yd GP Bucket, 44,591 lbs. $1,141 $3,310 $9,600962M (coupler & forks) 5.0 yd GP Bucket, 47,000 lbs. $1,213 $3,517 $10,200966M 5.25 yd GP Bucket, 51,176 lbs. $1,534 $4,448 $12,900966M (coupler & forks) 5.25 yd GP Bucket, 54,739 lbs. $1,605 $4,655 $13,500972M 6.25 yd GP Bucket, 54,871 lbs. $1,653 $4,793 $13,900980M 7.75 yd GP Bucket, 66,337 lbs. $2,010 $5,828 $16,900982M 8.75 yd GP Bucket, 78,402 lbs. $2,283 $6,621 $19,200988K 10.0 yd GP Bucket, 112,574 lbs. $3,389 $9,828 $28,500Loader AttachmentsForks 926 to 938 $48 $138 $400 950 to 966 $71 $207 $600 Material Handling Arm $178 $517 $1,500

Wheel Loaders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

903 – 918 $175 $285 $6.25924 – 938 $340 $520 $7.00950 – 972 $520 $755 $7.95 980* – 982* $755 $965 $10.00 988* $930 $1,125 $14.50

* Additional charges for permits and pilots may apply.**Additional charges for permits, pilot, assembly & disassembly may apply.


PAGE

5


MINI EXCAVATORS DAY WEEK 4-WEEK

300.9 2,170 lbs., 5’ 6” dig depth $202 $586 $1,700 301 4,068 lbs., 7’ 2” dig depth $285 $828 $2,400302 5,890 lbs., 9’ 0” dig depth $297 $862 $2,500303 7,782 lbs., 9’ 0” dig depth $321 $931 $2,700303.5 8,139 lbs., 9’ 6” dig depth $392 $1,138 $3,300304 8,996 lbs., 11’ 2” dig depth $428 $1,241 $3,600305 11,217 lbs., 12’ 0” dig depth $488 $1,414 $4,100305.5 11,958 lbs., 12’ 6” dig depth $535 $1,552 $4,500308 18,519 lbs., 13’ 6” dig depth $583 $1,690 $4,900Mini Excavator Attachments Compaction Wheel $71 $207 $600 Extra Bucket (300.9 – 303.5) $36 $103 $300 Extra Bucket (304 – 308) $60 $173 $500 Hydraulic Compaction Plate $119 $345 $1,000 Hydraulic Hammer Same rate as the carrier Auger (includes 1 bit) $71 $207 $600 Extra Auger Bit $18 $52 $150 Auger Extension $10 $28 $80 Ripper Shank $95 $276 $800

Mini Excavators Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

300.9 – 308E $175 $285 $6.25

HYDRAULIC EXCAVATORS DAY WEEK 4-WEEK

311 28,600 lbs., 18’ 4” dig depth $654 $1,897 $5,500313 GC 30,865 lbs., 19’ 8” dig depth $654 $1,897 $5,500313 33,080 lbs., 19’ 8” dig depth $737 $2,138 $6,200315 37,794 lbs., 19’ 5” dig depth $761 $2,207 $6,400316 39,029 lbs., 20’ 0” dig depth $761 $2,207 $6,400320 49,600 lbs., 22’ 1” dig depth $820 $2,379 $6,900323 56,200 lbs., 22’ 1” dig depth $892 $2,586 $7,500325 57,100 lbs., 22’ dig depth $927 $2,690 $7,800326 66,250 lbs., 22’ 3” dig depth $987 $2,862 $8,300326 Long Reach 65,500 lbs., 61’ reach at ground $1,118 $3,241 $9,400330 69,950 lbs., 23’ 7” dig depth $1,165 $3,379 $9,800330 Long Reach 69,950 lbs., 61’ reach at ground $1,296 $3,759 $10,900335FL CR (compact radius) 84,170 lbs., 22’ 9” dig depth $1,249 $3,621 $10,500



PAGE

6



HYDRAULIC EXCAVATORS (CONT.) DAY WEEK 4-WEEK

336 88,400 lbs., 26’ 1” dig depth $1,367 $3,966 $11,500349FL 107,145 lbs., 25’ 1” dig depth $1,879 $5,448 $15,800374FL 157,655 lbs., 31’ 6” dig depth $3,103 $9,000 $26,100390FL 192,680 lbs., 35’ 0” dig depth $3,960 $11,483 $33,300Weight and dig depth may vary depending on configuration.Excavators include one standard bucket.Excavator Attachments Compaction Wheel (311 – 325) $178 $517 $1,500 Compaction Wheel (326 – 349) $226 $655 $1,900 Extra Bucket (Cat 311 – 316) $95 $276 $800 Extra Bucket (Cat 320 – 330) $143 $414 $1,200 Extra Bucket (Cat 336 – 349) $190 $552 $1,600 Extra Bucket (Cat 374 – 390) $357 $1,034 $3,000 Hydraulic Hammer Same rate as carrier machine Hydraulic Plate Compactor 1/2 the rate as carrier machine Hydraulic Thumb $143 $414 $1,200 Ripper Shank $178 $517 $1,500 Slope Packer 6’ $357 $1,034 $3,000 Skeleton Bucket $143 $414 $1,200Krypto-Klaw Buckets (Bucket & Thumb Combo) 316 – 36” Krypto-Klaw $333 $966 $2,800 320 – 42” Krypto-Klaw $380 $1,103 $3,200 329 – 48” Krypto-Klaw $476 $1,379 $4,000 336 – 54” Krypto-Klaw $547 $1,586 $4,600

Hydraulic Excavators Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

311 – 313 $340 $520 $7.00 314, 315, 316 $340 $520 $7.00320 – 326 $520 $755 $7.95329 – 330 $680 $930 $9.60335 – 336* $755 $965 $10.00349* $860 $1,125 $14.10374** Call for Quote Call for Quote Call for Quote390** Call for Quote Call for Quote Call for Quote


PAGE

7


WHEELED EXCAVATORS DAY WEEK 4-WEEK

M314F 31,658 lbs., 19’ 0” dig depth $892 $2,586 $7,500M322F 49,229 lbs., 20’ 5” dig depth $1,213 $3,517 $10,200

Wheeled Excavators Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

M314F $520 $755 $7.95 M322F $520 $755 $7.95

TRACK-TYPE TRACTORS DAY WEEK 4-WEEK

D4K2 19,183 lbs., Dozer (6-way) / Ripper $547 $1,586 $4,600D5K2 21,535 lbs., Dozer (6-way) / Ripper $654 $1,897 $5,500D6K2 30,442 lbs., Dozer (6-way) / Ripper $832 $2,414 $7,000D6N 40,387 lbs., Dozer (6-way) / Ripper $1,201 $3,483 $10,100D6N LGP 40,446 lbs., Dozer (6-way) / LGP $1,272 $3,690 $10,700D6T 50,090 lbs., SU Dozer / Ripper $1,570 $4,552 $13,200D6T LGP 49,489 lbs., SU Dozer / LGP $1,653 $4,793 $13,900D8T 90,110 lbs., SU Dozer / Ripper $3,032 $8,793 $25,500D9T 107,074 lbs., SU Dozer / Ripper $4,376 $12,690 $36,800D10T 150,695 lbs., SU Dozer / Ripper $6,183 $17,931 $52,000D11T 232,838 lbs., SU Dozer / Ripper $8,918 $25,862 $75,000

Track-Type Tractors Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

D4, D5 $175 $285 $6.25D6K $340 $520 $7.00D6 $680 $930 $9.60D8* $755 $965 $10.00D9* $860 $1,125 $14.10D10** Call for Quote Call for Quote Call for QuoteD11** Call for Quote Call for Quote Call for Quote



PAGE

8


MOTOR GRADERS DAY WEEK 4-WEEK

140M3 14’ Blade, Ripper, 183 hp $1,498 $4,385 $12,600140M3 AWD (all wheel drive) 14’ Blade, Ripper, 213 hp AWD $1,665 $4,828 $14,000160M3 14’ Blade, Ripper, 213 hp $1,593 $4,621 $13,400160M3 AWD (all wheel drive) 14’ Blade, Ripper, 213 hp AWD $1,784 $5,172 $15,00014M 16’ Blade, Ripper, 259 hp $1,986 $5,759 $16,70016M 16’ Blade, Ripper, 291 hp $3,734 $10,828 $31,40018M 18’ Blade, Ripper, 304 hp $4,400 $12,759 $37,000

Motor Graders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

140, 160 $520 $755 $7.95 14, 16*, 18* $680 $930 $9.60

SCRAPERS DAY WEEK 4-WEEK

623K 23 yd heaped Elevating $2,901 $8,414 $24,400627K 22 yd heaped Push-Pull $3,210 $9,310 $27,000631K 34 yd heaped Conventional Call for price637K 34 yd heaped Push-Pull Call for price

Scrapers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

623 $755 $965 $10.00 627 $860 $1,125 $14.10

TELESCOPIC HANDLERS DAY WEEK 4-WEEK

TH255 6,500 lb. capacity, 42’ lift height $321 $931 $2,700TL642 6,500 lb. capacity, 42’ lift height $488 $1,414 $4,100TH408 8,100 lb. capacity, 24’ lift height $452 $1,310 $3,800TL943 9,000 lb. capacity, 43’ lift height $547 $1,586 $4,600TL1055 10,000 lb. capacity, 55’ lift height $690 $2,000 $5,800TL1255 12,000 lb. capacity, 55’ lift height $749 $2,172 $6,300Telehandler Attachments Truss Jib $178 $517 $1,500

Telehandlers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

TH255 – TH408 $175 $285 $6.25TL943 – TL1255 $340 $520 $7.00



PAGE

9


BACKHOE LOADERS DAY WEEK 4-WEEK

415F2 IL (Industrial Loader) 24,251 lbs. Gannon Box, 4WD $357 $1,034 $3,000420F E-stick Extend-a-hoe, 17’ 9” dig depth, 4WD $428 $1,241 $3,600420F IT E-stick Extend-a-hoe, 14’ 4” dig depth, 4WD $440 $1,276 $3,700430F E-stick Extend-a-hoe, 19’ 5” dig depth, 4WD $452 $1,310 $3,800430F IT E-stick Extend-a-hoe, 15’ 8” dig depth, 4WD $488 $1,414 $4,100450F E-stick Extend-a-hoe, 21’ 4” dig depth, 4WD $606 $1,759 $5,100Backhoe Attachments Compaction Wheel $71 $207 $600 Extra Bucket $36 $103 $300 Hydraulic Hammer Same rate as carrier machine Hydraulic Plate Compactor 1/2 the rate as carrier machine Ripper $95 $276 $800

Backhoe Loaders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All Sizes $175 $285 $6.25

COMPACT TRACK LOADERS DAY WEEK 4-WEEK

239D 67 hp, 7,289 lbs., 2,050 lb. capacity $369 $1,069 $3,100249D 67 hp, 7,685 lbs., 2,300 lb. capacity $392 $1,138 $3,300259D 74 hp, 8,845 lbs., 2,900 lb. capacity $440 $1,276 $3,700279D 74 hp, 9,893 lbs., 2,935 lb. capacity $499 $1,448 $4,200289D 74 hp, 10,533 lbs., 3,800 lb. capacity $523 $1,517 $4,400299D 98 hp, 11,275 lbs., 4,600 lb. capacity $606 $1,759 $5,100299D XHP (high flow, high pressure) 110 hp, 11,608 lbs., 4,725 lb. capacity $702 $2,034 $5,900

Compact Track Loaders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All Sizes $175 $285 $6.25



PAGE

10


SKID STEER LOADERS DAY WEEK 4-WEEK

226D 67 hp, 5,705 lbs., 1,500 lb. capacity $297 $862 $2,500236D 74 hp, 6,559 lbs., 1,800 lb. capacity $321 $931 $2,700246D 74 hp, 7,424 lbs., 2,150 lb. capacity $345 $1,000 $2,900242D 74 hp, 6,980 lbs., 2,150 lb. capacity $333 $966 $2,800262D 74 hp, 8,011 lbs., 2,700 lb. capacity $369 $1,069 $3,100272D 98 hp, 8,768 lbs., 3,400 lb. capacity $428 $1,241 $3,600272D XHP (high flow, high pressure) 110 hp, 9,255 lbs., 3,650 lb. capacity $499 $1,448 $4,200Skid Steer Attachments Angle Blade (angle only) $83 $241 $700 Auger $54 $155 $450 Auger Bit $18 $52 $150 Auger Extension $10 $28 $80 Box Blade w/ 2D Grade Control $428 $1,241 $3,600 Broom (bristle wear charge $160/in.) $143 $414 $1,200 Brush Cutter $155 $448 $1,300 Brush Mulcher (high flow hyd.) $428 $1,241 $3,600 Brush Saw $119 $345 $1,000 Bucket (extra) $48 $138 $400 Cold Planer (excluding bits / $7.50 ea.) $214 $621 $1,800 Dozer Blade (angles & tilts) $107 $310 $900 Forks $36 $103 $300 Grapple Bucket $95 $276 $800 Grapple Rake $59 $172 $500 Hydraulic Hammer $285 $828 $2,400 Landscape / Power Rake $107 $310 $900 Skeleton Bucket $48 $138 $400 Snow Blower $190 $552 $1,600 Snow Plow / Snow Box $143 $414 $1,200 Stump Grinder $178 $517 $1,500 Tiller $119 $345 $1,000 Trencher $214 $621 $1,800Skidsteer Trailer 20’ Tilt or Ramp $144 $414 $1,200

Skid Steer Loaders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All Sizes $175 $285 $6.25



PAGE

11


TRACK LOADERS DAY WEEK 4-WEEK

953K 34,209 lbs., 2.3 yd GP Bucket $1,023 $2,966 $8,600963K 44,577 lbs., 3 yd GP Bucket $1,356 $3,931 $11,400

Track Loaders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

953, 963 $520 $755 $7.95

TRACK DRILLS DAY WEEK 4-WEEK

MD5075 Up to 5” dia. Single pass 18’, 102’ max $2,259 $6,552 $19,000MD5150 Up to 6” dia. Single pass 18’ 3”, 102’ max $2,913 $8,448 $24,500

Track Drills Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

MD5075, MD5150 $520 $755 $7.95

ARTICULATED TRUCKS DAY WEEK 4-WEEK

725 26.5 Ton Articulated Truck, 50,795 lbs. $1,427 $4,138 $12,000730 31 Ton Articulated Truck, 52,690 lbs. $1,629 $4,724 $13,700740 GC 40 Ton Articulated Truck, 71,377 lbs. $2,295 $6,655 $19,300745 45.2 Ton Articulated Truck, 73,553 lbs. $2,402 $6,966 $20,200

Articulated Trucks Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

725 – 730 $520 $755 $7.95735 – 745* $755 $965 $10.00

OFF HIGHWAY TRUCKS DAY WEEK 4-WEEK

770 42.6 Ton Truck Call for Price772 51 Ton Truck Call for Price773 61 Ton Truck Call for Price775 70 Ton Truck Call for Price777 100 Ton Truck Call for Price

Off Highway Trucks Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

770 – Larger** Call for Quote Call for Quote Call for Quote



PAGE

12


ON HIGHWAY DUMP TRUCKS DAY WEEK 4-WEEK

Dump Truck 6 Yd. 6 Yard, 10’ Dump Body $428 $1,241 $3,600Dump Truck 10 Yd. 10 Yard, 15’ Dump Body $773 $2,241 $6,500*Mileage allowance of 100 per day, 500 per week, 2,000 per 4 weeks. Charge of $0.25 per mile over allowed miles. **CDL and Insurance required for all on highway trucks.

Dump Trucks Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

6 yd, 10 yd $175 $285 $6.25

WATER EQUIPMENT DAY WEEK 4-WEEK

Water Truck, 2,000 gl. On highway, 2,000 gallon $428 $1,241 $3,600Water Truck, 4,000 gl. On highway, 4,000 gallon $773 $2,241 $6,500*Mileage allowance of 100 per day, 500 per week, 2,000 per 4 weeks. Charge of $0.25 per mile over allowed miles. **CDL and Insurance required for all on highway trucks.

621K Water Wagon 8,000 Gallon $2,140 $6,207 $18,000730C Water Truck 6,000 Gallon $1,986 $5,759 $16,700740 Water Truck 8,000 Gallon $2,140 $6,207 $18,000745 Water Truck 9,000 Gallon $2,616 $7,586 $22,000

Water Trailer, 500 gl. 500 gallon water trailer $143 $414 $1,200Water Tower, 12,000 gl. 12,000 gallon stand tank $333 $966 $2,400J-Stand Stand Pipe $95 $276 $800

Water Equipment Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

Water Trailers $175 $285 $6.25 Water Trucks $175 $285 $6.25 Water Towers $340 $520 $7.00 613 / 5,000 gal* $520 $755 $7.95 730 / 6,000 gal* $520 $755 $7.95 621 / 8,000 gal* $755 $965 $10.00 740 / 8,000 gal* $755 $965 $10.00



PAGE

13


SOIL COMPACTORS DAY WEEK 4-WEEK

815K 45,765 lbs., 12’ 4” Dozer $1,926 $5,586 $16,200825K 78,326 lbs., 15’ 2” Dozer $3,020 $8,759 $25,400

Soil Compactors Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

815* $520 $755 $7.95 825* $755 $965 $10.00 836* $860 $1,125 $14.10

VIBRATORY ROLLERS DAY WEEK 4-WEEK

Single Drum, PadCP34 11,000 lbs., 50” Drum, 62” Blade $511 $1,483 $4,300CP44 16,083 lbs., 66” Drum, 83” Blade $737 $2,138 $6,200CP56 25,707 lbs., 84” Drum, 99” Blade $927 $2,690 $7,800CP74 36,048 lbs., 84” Drum, 99” Blade $1,058 $3,069 $8,900

Single Drum, SmoothCS34 9,800 lbs., 50” Drum $428 $1,241 $3,600CS44 15,307 lbs., 66” Drum $606 $1,759 $5,100CS54 23,265 lbs., 84” Drum $678 $1,966 $5,700CS56 25,346 lbs., 84” Drum $785 $2,276 $6,600CS68 31,572 lbs., 84” Drum $832 $2,414 $7,000CS74 35,264 lbs., 84” Drum $939 $2,724 $7,900Shell Kits $178 $517 $1,500

Vibratory Rollers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

CP34, CS34 – CP44, CS44 $175 $285 $6.25 CP56, CS56 – CP74, CS74 $340 $520 $7.00



PAGE

14


ASPHALT ROLLERS DAY WEEK 4-WEEK

Dual DrumCB14 / CB1.7 3,538 lbs., 35” Drums $226 $655 $1,900CB1.8 3,825 lbs., 39” Drums $226 $655 $1,900CB22 5,629 lbs., 39” Drums $273 $793 $2,300CB24 6,003 lbs., 47” Drums $309 $897 $2,600CC24 Combi 5,380 lbs., 47” Combi $333 $966 $2,800CB34 8,157 lbs., 51” Drums $392 $1,138 $3,300CC34 Combi 7,446 lbs., 51” Combi $404 $1,172 $3,400CB7 / CB44 17,615 lbs., 59” Drums $630 $1,828 $5,300CB10 / CB54B 20,945 lbs., 67” Drums $725 $2,103 $6,100CB64B (“B” series) / CB13 27,557 lbs., 79” Drums $820 $2,379 $6,900CB15 / CB66 28,958 lbs., 84” Drums $999 $2,897 $8,400CB16 / CB68 31,941 lbs., 84” Drums $1,118 $3,241 $9,400Single DrumCCS7 Single Drum 17,000 lbs., 67” Single Drum $713 $2,069 $6,000C110 (CS54) Single Drum 19,840 lbs., 84” Single Drum (Weiler) $951 $2,759 $8,000CCS9 Single Drum 20,580 lbs., 84” Single Drum $951 $2,759 $8,000

Asphalt Rollers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

CB14 – CB44 $175 $285 $6.25 CCS7 – CB68 $340 $520 $7.00

PNEUMATIC ROLLERS DAY WEEK 4-WEEK

CW14 / CW16 28,528 lbs., 9 Wheel $606 $1,759 $5,100CW34 59,525 lbs., 7 Wheel $1,058 $3,069 $8,900

Pneumatic Rollers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All sizes $340 $520 $7.00

ASPHALT PAVING EQUIPMENT DAY WEEK 4-WEEK

P195 Weiler Paver 4’ - 7’ paving width $999 $2,897 $8,400P385 Weiler Paver 8’ - 15’ paving width $1,249 $3,621 $10,500AP555F Paver 8’ - 15’ paving width $2,497 $7,241 $21,000 AP1055E Paver 10’ - 20’ paving width $3,151 $9,138 $26,500*Cleaning fee of $500 if not cleaned by customer



PAGE

15


ASPHALT PAVING EQUIPMENT (CONT.) DAY WEEK 4-WEEK

E1250 Weiler Weiler Transfer Machine $3,448 $10,000 $29,000E2850 Weiler Weiler Transfer Machine $3,805 $11,034 $32,000Hopper Insert for E2850 $119 $384 $1,000W530A Road Widener $1,427 $4,138 $12,000Road Widener Attachment RV Road Widener Attachment $832 $2,414 $7,000S200 Soil Stabilizer Bit Wear: $1,008 for 176 bits $1,189 $3,448 $10,000

Asphalt Paving Equipment Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

P385, AP555E, AP655D $340 $520 $7.00 AP1055E, W530A $520 $755 $7.95 E2850 Weiler $755 $965 $10.00

CRACK SEALER DAY WEEK 4-WEEK

Crafco SS125, SS250, EZ1000 $690 $2,000 $5,800*Sealant not included. For sealant, contact: James Clark (602) 309-5017

MILLING MACHINES DAY WEEK 4-WEEK

PM312 48,153 lbs., 48” cut width $3,092 $8,966 $26,000PM622 74,580 lbs., 88” cut width $4,043 $11,724 $34,000

Gomaco RTP500 50,000 lbs., rubber track placer $3,686 $10,690 $31,000

SELF-PROPELLED BROOMS DAY WEEK 4-WEEK

Ride On Broom (3-wheel) Orops / 8’ Broom / Towable $351 $1,017 $2,950Ride On Broom (4-wheel) Cab / AC / 8’ Broom / Water Kit $499 $1,448 $4,200*Bristle wear charged at $160 per inch. Damage will be prorated based off replacement of all wafers and spacers.

Self-Propelled Brooms Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

Ride On Broom $175 $285 $6.25



PAGE

16


LIGHT COMPACTION EQUIPMENT DAY WEEK 4-WEEK

RollersRT82-SC (walk-behind) 3,300 lbs., 33” Dbl Drum Pad $333 $966 $2,800RX1575 (walk-behind) 3,307 lbs., 33” Dbl Drum Pad $333 $966 $2,800

RammersMTX60 4-Stroke, 141 lbs., 10” x 13” Shoe $98 $283 $820MTX70 4-Stroke, 154 lbs., 11” x 13” Shoe $107 $310 $900

Vibratory PlatesMVC82VGHW 181 lbs., 17.7” Plate Width $92 $267 $775MVC88VGHW 202 lbs., 19.7” Plate Width $95 $276 $800

Reversible Vibratory PlatesMVH508 (diesel) 1,122 lbs., 26” Plate Width $217 $630 $1,825

Light Compaction Equipment Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All sizes $175 $285 $6.25

PUMPS DAY WEEK 4-WEEK

Diesel Self Priming Pumps4” Diesel Max. 550 GPM, trailer mtd. $226 $655 $1,9006” Diesel Max. 1,425 GPM, trailer mtd. $404 $1,172 $3,4008” Diesel Max. 1,700 GPM, trailer mtd. $499 $1,448 $4,200

Portable Gas Pumps2” Trash PT2A/QP2TH Max. 205 GPM, 134 lbs. $48 $138 $4003” Trash PT3A/QP3TH Max. 425 GPM, 164 lbs. $59 $172 $5004” Trash PTS4V/QP4TH Max. 705 GPM, 360 lbs. $95 $276 $800

Electric Submersible Pumps2” Electric Submersible Max. 66 GPM, 1 hp single phase $42 $120 $3503” Electric Submersible Max. 320 GPM, 3.5 hp 3 phase $84 $242 $700

Pump HoseDischarge Hose 2” / 3” / 4” / 6” x 50’ discharge hose $11 $31 $90Suction Hose 2” / 3” / 4” / 6” x 20’ intake hose $14 $40 $115

Diesel Self Priming Pumps Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

4”, 6”, 8” $175 $285 $6.25


PAGE

17


TRAILERS DAY WEEK 4-WEEK

TKT14U4 4’ deck, 14’ tilt, 14,000 lb. capacity $144 $414 $1,200TKT16U 4’ deck, 16’ tilt, 14,000 lb. capacity $144 $414 $1,200

LIGHT TOWERS DAY WEEK 4-WEEK

Allmand 4 x 1250 watt, 25’ height, hyd. mast $113 $328 $950

Light Towers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All sizes $175 $285 $6.25

AIR COMPRESSORS / AIR HAMMERS DAY WEEK 4-WEEK

110 CFM Atlas Copco $143 $414 $1,200185 CFM Atlas Copco, XAS185, 100 psi $197 $570 $1,650

60 lb. / 90 lb. Air Chicago Pneumatic CP1260, CP1290 $36 $103 $300Air Hose 50’ section air hose $6 $17 $50

Air Compressors Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All sizes $175 $285 $6.25

TRENCH SHIELDS DAY WEEK 4-WEEK

Heavy-Duty, Double-Wall8 x 12 Box 8’ H x 12’ L, 5,800 lbs., 4” wall $107 $310 $9008 x 16 Box 8’ H x 16’ L, 7,270 lbs., 4” wall $125 $362 $1,0508 x 20 Box 8’ H x 20’ L, 8,920 lbs., 4” wall $155 $448 $1,3008 x 24 Box 8’ H x 24’ L, 11,420 lbs., 4” wall $179 $518 $1,5004 x 12 Stacker 4’ H x 12’ L, 3,750 lbs., 4” wall $83 $241 $7004 x 16 Stacker 4’ H x 16’ L, 4,600 lbs., 4” wall $95 $276 $8004 x 20 Stacker 4’ H x 20’ L, 5,450 lbs., 4” wall $113 $328 $9504 x 24 Stacker 4’ H x 24’ L, 6,321 lbs., 4” wall $130 $380 $1,100Extra / oversize spreaders Extra set or 72” & longer spreaders $11 $31 $90Stacking Pins $55/ea. Extra Pins and Retainers $46/ea.



TRENCH SHIELDS CONT. DAY WEEK 4-WEEK

Manhole Shields (4” Double-Wall)8 x 8 Manhole Box 8’ H x 8’ L, 5,110 lbs. $107 $310 $9008 x 10 Manhole Box 8’ H x 10’ L, 6,010 lbs. $119 $345 $1,00010 x 10 Manhole Box 10’ H x 10’ L, 6,860 lbs. $143 $414 $1,2008 x 12 Manhole Box 8’ H x 12’ L, 6,870 lbs. $143 $414 $1,200Manhole shields require 5” diameter spreaders. For width of manhole shield add 4’ to spreader size due to 2’ wrap-around ends. Example: 36” spreaders + 4’ (wrap-around ends) = 7’ box width.

Aluminum Shields (3” Double-Wall)6 x 6 Aluminum Box 6’ H x 6’ L, 843 lbs. $95 $276 $8008 x 10 Aluminum Box 8’ H x 10’ L, 1,383 lbs. $95 $276 $8008 x 12 Aluminum Box 8’ H x 12’ L, 1,563 lbs. $95 $276 $80034” – 88” Adjustable Spreaders; Extra Aluminum Pins & Retainers $23/ea. Trench Plates5 x 10 5’ x 10’, 1” thick steel, 2,050 lbs. $16 $45 $1305 x 12 5’ x 12’, 1” thick steel, 2,725 lbs. $18 $50 $1468 x 12 8’ x 12’, 1” thick steel, 3,950 lbs. $28 $81 $2348 x 16 8’ x 16’, 1” thick steel, 5,300 lbs. $36 $105 $3028 x 20 8’ x 20’, 1” thick steel, 6,650 lbs. $45 $132 $380 Material SeparatorsMS12 Separator w/ 6” screen 7’ W x 11’ 10” L x 9’ H, 8’ x 12’ screen $143 $414 $1,200Additional Screen 2” minus, 3” minus, and 4” minus $48 $138 $400 Gravel BoxesGS-5.5 5.5 cubic yard bedding box $131 $380 $1,100GS-7.5 7.5 cubic yard bedding box $143 $414 $1,200GS-9 9 cubic yard bedding box $155 $448 $1,300

Delivery Rates Under 25 miles 25-60 miles 60+ miles ($ per mile)

All Types $175 $285 $6.25

PLEASE NOTE: • Haulage over 60 miles will bill at 25 to 60 rate plus mileage rate for additional miles.• Customer moves under 60 miles will be billed at $160/hr. for loads that are not oversize. • Oversize loads will be at the book rate.

ADDITIONAL HAULAGE-RELATED CHARGES:1. Escort fees and permits. 2. $150 per hour stand-by time will apply after the 1st half hour at the job site. 3. All parts loads (fall off load) including dozer, bucket, ripper, etc.: Under 25 miles = $175; 25-60 miles = $285, Over 60 miles = $6.25/mile.4. Any assembly charges will be performed by field service at the field service rate.** For haulage of customer-owned machines a $150 minimum will apply.


RENTAL EQUIPMENT PROTECTION

Under Rental Equipment Protection (REP), Wheeler Machinery Cat Rental Store will not hold you responsible for most causes of damage while the equipment is out on rent. In the event of a loss, REP will cover the replacement or repair of the damaged equipment. Account customers may opt out of this program if proof of insurance is provided. Coverage is mandatory for all non-account (cash) customers or if proof of insurance can’t be provided.

COST• 16% of rental charges

DEDUCTIBLE• $1,000 for equipment valued less that $24,999• $2,500 for equipment valued over $25,000• For equipment valued over $500,000 contact your Wheeler Representative.

WHAT’S COVERED• Accidental damage • Flood • Collisions • Hail − Collision damage (to the rented equipment ONLY) • Overturns − Impact damage (collision, equipment driven over) • Theft• Earthquake • Tornado• Fire • Vandalism• Falling Objects • Wind

EXCLUSIONS• Civil Authority • Nuclear hazard• Contamination or deterioration • Pollutants• Criminal, fraudulent, dishonest, or illegal acts • Temperature/Humidity• Loss of use • Voluntary parting with title• Mechanical breakdown • War and military action• In Transit • Wear and tear• Missing property (Unexplained or mysterious disappearance)

ADVANTAGES OF REP• Provides higher certainty of coverage• Hassle free claims in the event of a loss• Provides an option for customers who can’t provide proof of insurance coverage• Claims will not affect customer’s other insurance premiums• No waiting for coverage through insurance company

REQUIREMENTS FOR OPTING OUTCustomers have the option of waiving coverage by providing proof of insurance coverage from their agent.• Proof of insurance consists of certificate of property insurance showing specific or blanket

rented equipment coverage.• Proof of insurance must be faxed, photocopied, or emailed before the rental equipment leaves

the yard.• Proof of insurance must be supplied to the Cat Rental Store before rental equipment ships or

non-refundable REP charges will apply.• Customers who have provided proof of insurance may still elect to be covered by REP at their

discretion.


PAGE

19

RENTAL TERMS & CONDITIONS

RENTAL TERMS AND CONDITIONS: (see rental agreement for complete terms and conditions)

Lessee agrees to return machine clean and in good condition, less normal wear and tear with a full tank of fuel. If machine is returned dirty or low of fuel, cleaning and fuel servicing charges will apply.

Standard rental rates based on single shift at 176 hours a month, 40 hours a week and 8 hours a day. Additional hours accumulated will be billed accordingly. Rates do not include sales tax, insurance or freight.

OVERTIME RATES

Daily Rental – Rate divided by 8.Weekly Rental – Rate divided by 40.Monthly Rental – Rate divided by 176.

RENTER’S RESPONSIBILITIES:• Normal maintenance and service of machine, including changing all lubricants and fluids at

required intervals. Wheeler Machinery Co. offers on-site lube and oil service at an additional cost.

• Replacing teeth and cutting edges as needed

• All wear or damages to rubber tires

• Cylinder head breakage caused by lack of or low coolant

• Maintaining physical damage insurance coverage on rental machines, or accepting the terms and conditions of Wheeler Machinery Co.’s Physical Damage Waiver or Rental Equipment Protection and paying a charge of 16 percent of the gross rental charges. Wheeler Machinery Co.’s Physical Damage Waiver or REP is not available for trucks licensed for use on public highways. The customer must maintain auto liability and physical damage coverage for on-highway vehicles rented from Wheeler Machinery Co.

Rates are FOB Wheeler Machinery Co.’s yard.

Rates are subject to change without prior notice.

Machines are subject to availability.


CUSTOMER INSURANCE

CUSTOMER INSURANCE REQUIREMENTS: (for Rented/Leased Equipment) All customers are required to have general liability insurance and Rental Equipment Protection as outlined below:

ON-HIGHWAY CONSTRUCTION EQUIPMENT (Licensed for use on public highways)1. Business auto liability insurance: $1,000,000 per occurrence.2. Auto physical damage insurance: Full value of trucks: • Specify trucks rented or leased from Wheeler Machinery Co. • Include coverage for hired and non-owned autos • Name Wheeler Machinery Co. as an additional insured and loss payee

OFF-HIGHWAY CONSTRUCTION EQUIPMENT1. Commercial general liability insurance: $1,000,000 per occurrence, covering: • Customer’s operations • Wheeler Machinery Co. as an additional insured2. Physical Damage Insurance: Full value of equipment, covering: • Rented or leased equipment using a contractor’s equipment floater form or comparable form • Name Wheeler Machinery Co. as loss payee • The Physical Damage Insurance requirement shall not apply if customer participates in and pays for Wheeler Machinery Co.’s Rental Equipment Protection

EVIDENCE OF INSURANCE1. Customer must provide Wheeler Machinery Co. with a certificate of insurance confirming: • Appropriate coverage is in full force and effect • Such insurance may not be canceled or materially modified except by first giving Wheeler Machinery Co. 30 days prior written notice2. Please mail insurance certificates to: Wheeler Machinery Co. / Cat Rental Store 5065 West 2100 South Salt Lake City, UT 84120 Attn: Rental Department

Or you can email to: [email protected]

PAGE

21



PAGE

22

CRUSHING & SCREENING RENTAL RATES

CRUSHING & SCREENING EQUIPMENT DAY WEEK 4-WEEK

Crushers (Track Mounted)Lokotrack LT106 28” x 42” Jaw Crusher, 300 hp CAT engine $2,533 $7,600 $22,800Lokotrack LT120 47” x 34” Jaw Crusher, 415 hp CAT engine $3,556 $10,667 $32,000Lokotrack LT220D Close circuit HP200 cone w/5’ x 18’ (3) deck screen $3,200 $9,600 $28,800Lokotrack LT200HP HP200 Cone Crusher, 415 hp CAT engine $2,511 $7,533 $22,600Lokotrack LT1110 31” x 41” Impactor Feed Opening, 325 HP CAT $2,667 $8,000 $24,000 Lokotrack LT1213 35” x 52” Impactor Feed Opening, 415 HP CAT $2,889 $8,667 $26,000Lokotrack LT1213S 35” x 52” Impactor OPG. Dual slope 5’ x 12’ screen $3,511 $10,533 $31,600

Screens (Track Mounted)Anaconda FSL100 5” Vibrating Grizzly, Scalping Screen, 42” Discharge Conveyor $1,022 $3,067 $9,200Anaconda DF410 4’ x 10’, 2-Deck Screening Plant, 42” Discharge Conveyor $1,067 $3,200 $9,600Lokotrack ST2.4 5’ x 12’ 2-Deck Screening Plant - CAT 4.4 $1,329 $3,987 $11,960Lokotrack ST2.8 5’ x 16’ 2-Deck Screening Plant - CAT 4.4 $1,933 $5,800 $17,400Lokotrack ST3.5 5’ x 12’ 2-Deck Screening Plant - CAT 4.4 $1,444 $4,333 $13,000Lokotrack ST3.8 5’ x 18’ 2-Deck Screening Plant - CAT 4.4 $1,689 $5,067 $15,200Lokotrack ST4.8 5’ x 18’ 3-Deck Screening Plant - CAT 4.4 $1,933 $5,800 $17,400

Crushers (Trailer Mounted)C125 38” x 50” Jaw, 58”x24’ VGF (two 4’ long stepped grizzly sections) $3,844 $11,533 $34,600C106 28” x 42” Jaw, 150 hp electric motor, switchgear $2,333 $7,000 $21,000C3054 30” x 54” Jaw, 200 hp electric motor, switchgear $3,078 $9,233 $27,700HP3 Rear discharge belt, 300 hp electric motor, switchgear $2,444 $7,333 $22,000HP4 Rear discharge belt, 400 hp electric motor, switchgear $2,844 $8,533 $25,600HP300 RD Rear discharge belt, 300 hp electric motor, switchgear $2,780 $8,335 $25,000 HP3 CC Closed circuit HP3 w/6’x20’ 3-deck screen $3,195 $9,585 $28,750HP300 CC Closed circuit HP300 w/6’x20’ 3-deck screen $3,420 $10,250 $30,750HP400 Rear discharge belt, 400 hp electric motor, switchgear $2,972 $8,917 $26,750 GP300S Rear discharge belt, 300 hp electric motor, switchgear $3,078 $9,233 $27,700Barmac B9100 Rear discharge belt, twin 400 hp electric motor, switchgear $1,778 $5,333 $16,000* Additional charges for permits and pilots may apply.**Additional charges for permits, pilot, assembly & disassembly may apply.


PAGE

23


CRUSHING & SCREENING EQUIPMENT (CONT.) DAY WEEK 4-WEEK

Crushers (Trailer Mounted – Cont.)Eagle Rip Rap Plant 67”x24’ VGF (2) 5’ Adj Grizzly Bar sections, 42”x12’ Grizzly belt w/ 10hp electric motor, switchgear $2,083 $6,250 $18,750Eagle 1200CC Rear discharge belt, 300 hp electric motor, switchgear $3,922 $11,767 $35,300Eagle 1400CC 22 hp primary impactor w/45”x18’ VGF, 5’x16’ 2-deck screen $4,444 $13,333 $40,000Eagle 6x20 Screen 6’x20’ 3-deck horizontal screen plant $1,356 $4,067 $12,200

Screens (Trailer Mounted)RDO 6x16 Screener Diesel/Hydraulic self-contained screen plant on chassis $1,444 $4,333 $13,0006 x 20 3-deck horiz. screen plant, switchgear $1,111 $3,333 $10,0007 x 20 3-deck horiz. screen plant, switchgear $1,444 $4,333 $13,0008 x 20 3-deck horiz. screen plant, switchgear $1,778 $5,333 $16,000

Field Conveyors36” x 30’ Conveyor Field conveyor $122 $367 $1,10036” x 40’ Conveyor Field conveyor $144 $433 $1,30036” x 60’ Conveyor Field conveyor $167 $500 $1,50048” x 60’ Conveyor Field conveyor $244 $733 $2,200Adj. Support Legs Adjustable Height Support Legs $17 $50 $150

Hydraulic Conveyors36” x 40’ Hyd Drive Conveyor Hydraulic Field conveyor $144 $433 $1,300

Radial Stacking Conveyors36” x 70’ Stacker electric 36” x 70’ Radial Stacking Conveyor $411 $1,233 $3,70036” x 80’ Diesel/Hyd Stacker (wheeled) Self contained, power raise, power travel $578 $1,733 $5,20036” x 80’ Diesel/Hyd Stacker (tracked) Self contained, power raise, power travel $722 $2,167 $6,50036” x 100’ Radial Stacker 36” x 100’ Radial Stacking Conveyor $511 $1,533 $4,60036” x 125’ Radial Stacker 36” x 125’ Radial Stacking Conveyor $767 $2,300 $6,90036” x 140’ Magnum electric Low Profile Telescoping Stacker $1,333 $4,000 $12,00036” x 150’ Magnum electric Telescoping Stacker $1,444 $4,333 $13,000

Bins / Feeders / Hoppers10’ x 16’ Grizzly Feeder Portable HYD 6” – 8” Grizzly bar spacing $1,167 $3,500 $10,50048” Truck Unloader Driver over unloader $1,056 $3,167 $9,50072” Truck Unloader Driver over unloader $1,222 $3,667 $11,000

*Plus applicable wear fee, screen cloth, etc. Customer agrees to the following responsibilities:Provide all normal maintenance items; Cleanup charge for excessively dirty machines; Maintain machine as specified in lube & maintenance manual; Compensate for wear items, such as manganese wear, jaw plates, shoes, anvils, etc.; Provide adequate insurance; Repair or replace any damage to machine. Compensate for abnormal wear of tires, including cuts and abrasions.



PAGE

24


CRUSHING & SCREENING EQUIPMENT (CONT.) DAY WEEK 4-WEEK

Environmental Equipment – EdgeTRT516 $1,944 $5,833 $17,500TRT622 $2,222 $6,667 $20,000TRM622 $2,083 $6,250 $18,750Slayer XL $4,089 $12,267 $36,800MS80 $533 $1,600 $4,800TS80 $667 $2,000 $6,000FTS-75 Mulch Master $1,722 $5,167 $15,500MC1400 $1,833 $5,500 $16,500

Environmental Equipment – EcoverseSM720 Plus Tire Trommel $1,944 $5,833 $17,500SM720K Track Trommel $2,222 $6,667 $20,000DW3060K – Type F $2,083 $6,250 $18,750Doppstadt SM Star Screen Insert $4,089 $12,267 $36,800Backkers 3-TAL-STAR Screen $533 $1,600 $4,800Bachkhus A55 Turner $667 $2,000 $6,0001/2”, 5/8”, 1” Trommel Drums $1,722 $5,167 $15,500

Crushers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

DF410 $490 $720 $7.20 ST2.8 $490 $720 $7.20 ST3.5 $490 $720 $7.20 ST3.8 $490 $720 $7.20 LT106* $850 $1,070 $12.00LT1110* $640 $880 $8.15 LT1213* $850 $1,070 $12.00 LT1213S* $960 $1,230 $14.00 LT200HP* $640 $880 $8.15 Edge MS80 Rubber Tire Stacker $640 $880 $8.15

Trailer Mtd. Crusher Units Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

NW300HPCC* $960 $1,230 $14.00 NWHP4* $720 $875 $8.15 NWHP400* $720 $875 $8.15 NWC106* $960 $1,230 $14.00 NWC3054* $960 $1,230 $14.00 Masaba Magnum* $760 $1,000 $12.00



PAGE

25

INSURANCE REQUIREMENTS


We would like to have an insurance certificate on file for your company when the need for equipment arises. Our preference is to retain a blanket insurance certificate for any and all equipment rented during your policy period.

Please observe the following requirements per our rental agreements: OFF –HIGHWAY CONSTRUCTION EQUIPMENT

1. Commercial general liability insurance: $1,000,000 per occurrence, $ 2,000,000 Aggregate.

• Wheeler Machinery Co. named as additional insured

• List the liability policy number on the Certificate and the limits

• List the inception and the expiration dates

2. Physical Property Damage insurance covering the full value of equipment rented:

• Rented or leased equipment using a contractors’ equipment floater or comparable form

• Wheeler Machinery Co. named as loss payee

• List the inland marine policy number on the Certificate and the limits

• List the inception and the expiration dates

• Exception: The physical damage insurance requirement shall not apply if customer participates in and pays for Wheeler Machinery’s Rental Equipment Protection (REP).

ON-HIGHWAY CONSTRUCTION EQUIPMENT (licensed for use on public highways)

• Business Automobile Liability insurance: $1,000,000 limit per occurrence

• Name Wheeler Machinery Co. named as an additional insured for Business Automobile Liability coverage

• Include coverage for hired and non-owned autos

• Automobile Physical Damage insurance : covering the Actual Cash Value of the vehicle

• Specify the on-highway vehicle rented or leased from Wheeler Machinery Co.

• Name Wheeler Machinery Co. as a Loss Payee for Automobile Physical Damage coverage

• Wheeler Machinery’s Physical Damage Waiver is not available for trucks licensed for use on public highways, but can be carried for trailers.

If you have further questions about our insurance requirements please feel free to contact us. Certificates may be emailed to [email protected] for immediate service or an original may be sent by mail. We greatly appreciate your business and look forward to meeting your future needs.


SOUND ATTENUATED GENSETS DAY WEEK 4-WEEK

20kW/25kVA Single Shift $121 $363 $1,089 Double Shift $182 $545 $1,634 Triple Shift $242 $726 $2,178

28kW/35kVA Single Shift $133 $399 $1,197 Double Shift $200 $599 $1,796 Triple Shift $266 $798 $2,394

36kW/45kVA Single Shift $170 $510 $1,530 Double Shift $255 $765 $2,295 Triple Shift $340 $1,020 $3,060

56kW/70kVA Single Shift $220 $660 $1,980 Double Shift $330 $990 $2,970 Triple Shift $440 $1,320 $3,960

100kW/125kVA Single Shift $346 $1,038 $3,114 Double Shift $519 $1,557 $4,671 Triple Shift $692 $2,076 $6,228



**A prorated “Service Fee” will be assessed on all rentals (determined by unit size)**

* Day = 8 hrs., Week = 40 hrs., 4-Week = 176 hrs. Rental Equipment Protection does not apply to Power Systems Rental Equipment.

POWER SYSTEMS RENTAL RATES



SOUND ATTENUATED GENSETS (CONT.) DAY WEEK 4-WEEK



230kW/285kVA Single Shift $522 $1,566 $4,698 Double Shift $783 $2,349 $7,047 Triple Shift $1,044 $3,132 $9,396

300kW/375kVA Single Shift $715 $2,145 $6,435 Double Shift $1,073 $3,218 $9,653 Triple Shift $1,430 $4,290 $12,870


350kW Tier4i Single Shift $935 $2,805 $8,415 Double Shift $1,403 $4,208 $12,623 Triple Shift $1,870 $5,610 $16,830



600kW/750kVA Single Shift $1,045 $3,135 $9,405 Double Shift $1,568 $4,703 $14,108 Triple Shift $2,090 $6,270 $18,810

800kW/1000kVA Single Shift $1,320 $3,960 $11,880 Double Shift $1,980 $5,940 $17,820 Triple Shift $2,640 $7,920 $23,760


SOUND ATTENUATED GENSETS (CONT.) DAY WEEK 4-WEEK

1000kW/1250kVA Single Shift $1,760 $5,280 $15,840 Double Shift $2,640 $7,920 $23,760 Triple Shift $3,520 $10,560 $31,680 2000kW/2500kVA Single Shift $3,597 $10,791 $32,373 Double Shift $5,396 $16,187 $48,560 Triple Shift $7,194 $21,582 $64,746

NATURAL GAS DAY WEEK 4-WEEK

XG135 Standby 135kW / Prime 120kW (sea level) N/A $3,850 $11,550XQ1475G 1475kW / 1844kVA N/A $37,950 $75,900

ELECTRICAL DISTRIBUTION DAY WEEK 4-WEEK

Single Conductor4/0 w/Camloc Ends Single conductor 4/0 Type W cable $42.90 $128.70 $386.10 w/camlocs - 400 amp, 4 per set, each (50’) 4/0 Pigtail Single conductor 4/0 Type W cable $4 $10.50 $36 camloc to bare cable (pigtail) each (3’) 535 MCM Medium voltage, single conductor, N/A $550 $825 750 amp, each (50’)Multi-Conductor10/5 Extensions #10awg/5 wire, 20 amp, 208v, $120 $360 $1,080 3 twistlock ext. cable, each (50’)Power Distribution PanelsQBFP-200 200 amp, quad box feeder panel $55 $165 $495 (provides 24-20 amp, 120v)1000A-BRKRS 1000 amp breakers, 2 ea 1000 amp brkrs $247 $741 $2,223 in a NEMA 1 cabinet 1200A-BRKRS 1200 amp breakers, 2 ea 1200 amp brkrs $247 $741 $2,223 in a NEMA 1 cabinet800A I-Line 800 amp, 3-phase NEMA 3R I-Line Distro N/A $440 $1,320 Panel, 1 hr/breaker @ $100/hr., $200 min. I-Line Breakers Breakers for I-Line Panels, per amp N/A $0.20 $0.60





PAGE

29

ELECTRICAL DISTRIBUTION (CONT.) DAY WEEK 4-WEEK

Power Distribution AccessoriesQuadbox String (QBS) Quadbox stringer-30’ spacing (3-20 amp, $33 $99 $297 120v, one quad box every 30’) Spider Box 50 amp, Spider Box (1-30 amp, 250v & $38 $114 $342 6-20 amp, 120v)Cable Ramp Cable Ramps, 5-1.25” channels, 3’ length $16 $48 $144

Resistive / Reactive Loadbanks3.3 MVA 3.3mVA Crestchic Loadbank N/A $9,300 $27,500100kW 100kW @ 240/480 VAC, 3-Phase, N/A $550 $1,750 60 Hz 240/120 Amps Per Phase 6.25 MVA 6.25mVA Crestchic Loadbank N/A $18,700 $55,000400kW 240/480V, 3hp, 60Hz N/A $805 $2,580

Transformers2500 kVA Multi-tap 480 to Medium Voltage $577 $1,731 $5,193 (4160, 12470, 13800) 5000 kVA Multi-tap 480 to Medium Voltage $1,210 $3,300 $7,700 (4160, 12470, 13800)

Transfer Switches2000 AMP 4 Pole – ATS NEMA 3R N/A $735 $2,200

COMPRESSED AIR DAY WEEK 4-WEEK

Low Pressure Machines375CFM Sullivan Palatek Single Shift $308 $924 $2,772

375 cfm @ 150 psi Double Shift $462 $1,386 $4,158 Triple Shift $616 $1,848 $5,544

XAVS400CD Single Shift $308 $924 $2,772400 cfm @ 200 psi Double Shift $462 $1,386 $4,158

Triple Shift $616 $1,848 $5,544

XAVS900 Single Shift $644 $1,932 $5,796860 cfm @ 200 psi Double Shift $966 $2,898 $8,694

Triple Shift $1,288 $3,864 $11,592



COMPRESSED AIR (CONT.) DAY WEEK 4-WEEK

XAMS1150 Single Shift $675 $2,025 $6,0751150 cfm @ 125 psi Double Shift $1,013 $3,038 $9,113

Triple Shift $1,350 $4,050 $12,150

XAS1800CD Single Shift $990 $2,970 $8,9101775 cfm @ 100 psi Double Shift $1,485 $4,455 $13,3651620 cfm @ 150 psi Triple Shift $1,980 $5,940 $17,820

200 HP Oil Free Electric 785CFM @ 125 psi $1,155 $3,465 $10,395Oil Free Compressors ** Call for Quote **

High Pressure MachinesXRVS1000 Single Shift $1,100 $3,300 $9,900

1000 cfm @ 365 psi Double Shift $1,650 $4,950 $14,850 Triple Shift $2,200 $6,600 $19,800

XRYS1260 Single Shift $1,320 $3,960 $11,8801426 cfm @ 300 psi Double Shift $1,980 $5,940 $17,8201207 cfm @ 510 psi Triple Shift $2,640 $7,920 $23,760

XRVS1350 Single Shift $1,375 $4,125 $12,3751335 cfm @ 365 psi Double Shift $2,063 $6,188 $18,563

Triple Shift $2,750 $8,250 $24,7502” Hose 25’ Length $20 $60 $1803 inch High Pressure Up to 600PSI, Boss Fitting $99 $297 $891

Dessicant Dryer400 CFM Ingersoll-Rand Model HL400 $150 $450 $1,350 Heatless Dessicant 1800 CFM (RDH 1550 G) Dessicant, heatless regenerating twin $495 $1,485 $4,455 tower - 3” fitting (120 V source needed)

Graco Vapor Abrasive Blast EquipmentEQ100M Integral Hand Truck Assembly, connects $133 $399 $1,197 to any 185-350 cfm air compressorEQ600S Stand Alone unit, connects to 375-600 cfm $272 $816 $2,448 air compressorEQ400T Self Contained Turn-Key unit, diesel driven $548 $1,644 $4,932 375 cfm air compressorMedia Quoted depending on type needed ** Call for Quote **





INSURANCE REQUIREMENTS

All customers renting from Wheeler Machinery Co. are required either to maintain physical damage insurance or to accept the Physical Damage Waiver prior to the rental of any equipment. If the customer chooses to maintain their own physical damage insurance, they must provide Wheeler Machinery Co. with valid proof of that insurance. If the customer chooses to accept the Physical Damage Waiver, Wheeler Machinery Co. will partially waive their responsibility as the Lessee for loss of or damage to the equipment. And, while the Physical Damage Waiver is not insurance, it does provide some limited protection against accidental direct physical loss of or damage to the rented or leased equipment other than automobiles or trucks licensed for use on public highways, which are not covered by the Physical Damage Waiver.

All Physical Damage Waiver charges will be charged at 15 percent of the gross rental charges.

EXCLUSIONS

The Physical Damage Waiver will not cover the following exclusions and causes of loss which will remain Lessee’s responsibility:

1. The first $3,000 of damage for all machines valued under $50,000. The first $5,000 of damage for all machines valued between $50,000 and $200,000. The first $7,500 of damage for all machines valued over $200,000. This deductible is per occurrence for each separate piece of equipment stolen or damaged.

2. Theft of or damage to all accessories, such as air hoses, tools, electric cords, blades, welding cable, fuel tanks and other similar items.

3. Damage caused by overloading or exceeding the rated capacity of equipment.

4. Damage to motors or other electrical devices caused by a surge in electric current.

5. Damage to tires and tubes caused by blowout, bruises, cuts, road hazards or other causes inherent in the use of the equipment.

6. Damage resulting from lack of lubrication or other normal servicing of equipment.

7. Wrongful conversion by the Customer in possession of the equipment or infidelity of Customer’s employees or persons to whom the equipment is entrusted, carriers for hire excepted.

8. Voluntarily parting with the equipment by the Customer or by

others to whom the equipment may be entrusted, except carriers for hire, if induced to do so by any fraudulent scheme, trick or false pretense.

9. Loss or damage caused by abuse or misuse of equipment in violation of any of the terms of the rental agreement.

10. Failure to file a police report following the theft, disappearance or vandalism of the equipment.

11. Damage caused by using straight gas in 2-cycle motors.

12. Loss or damage caused by failure to keep the equipment in a locked enclosure or otherwise secured when not in use.

13. Loss or damage resulting from criminal activity.

14. Loss or damage caused by intentional acts.

15. Loss or damage that was, or should have been, expected due to an extraordinary application or use of the equipment.

16. Delay, loss of market, loss of use, loss of profit, business interruption or indirect or consequential loss of any kind.

17. Loss or damage resulting from overturning or striking overhead objects.

• Lessee agrees that he/she has read the foregoing Physical Damage Waiver explanation and understands that it covers direct physical damage to equipment only and is not a substitute for liability insurance.

• Lessee agrees to participate in the Physical Damage Waiver from Wheeler Machinery Co. and has read and understands the terms and conditions of the Physical Damage Waiver.

• Wheeler’s Physical Damage Waiver is not available for trucks licensed for use on public highways. The customer must provide proof of insurance for these vehicles.

If Lessee chooses not to accept Physical Damage Waiver, proof of physical damage insurance on rented equipment must be provided. The Physical Damage Waiver will be charged until such proof has been provided.

UTAH MILEAGE CHART

801-908-8900 | wheelercat.com/rental-equipment |

rental rates 2019 - wheeler cat...mini excavators dayweek 4-week 300.9 2,170 lbs., 5’ 6” dig...

Documents