reowave®passive - reo-it.de filereo mains filter and a reo harmonics filter. the mains filters...

8
REOWAVE®passive The new generation of harmonic filters

Upload: vuthien

Post on 07-Aug-2019

226 views

Category:

Documents


0 download

TRANSCRIPT

REOWAVE®passiveThe new generation of harmonic filters

Netz Nichtlineare Last Netz Nichtlineare Last

REOWAVE

REOWAVE®passiveThe new generation of harmonic filters

Electrical components are continually becoming smaller, more efficient and cheaper. To achieve this, most applications include components such as thyristors or frequency converters. The components are also known as “non-linear loads“ because their characteristic curve is not a straight line, which leads to many undesirable problems. In particular, these include harmonics.

Harmonics are an example of the type of problem that are often simply not recognised correctly, but can cause significant malfunctioning – particularly with the increasing use of non-linear loads. Harmonics cause, for example, interference phenomena such as:

• Creating additional losses resulting in unnecessary consumption of energy• Reduced lifetime of transformers due to destruction of the insulation• Resonances in the supply networks• Measurement errors• Errors in tripping fuses• Serious faults in IT systems.

The solution for these problems is the REOWAVE®passive!This device is used at the place where the problems arise – where the biggest effect can be achieved. REOWAVE®passive is based on proven components of the REO CNW family such as REO mains filters and REO harmonic filters which, thanks to their excellent characteristics and the special circuit design of REOWAVE®passive, efficiently keep the harmonics away from the mains network.

Diagram 1: Uncontrolled rectifier Diagram 2: Diode rectifier with REOWAVE®passive

Diagram 3: Current (blue) und voltage (red) for a B6 rectifier configuration with scaled values

Diagram 4: Current (blue) und voltage (red) for a B6 rectifier with REOWAVE®passive; scaled values

Mains Mains Non-linear load Non-linear load

L

H

B

Reduction of the THDI value

Increasing network stability

Reduction of current consumption

Reduction of equipment costs

Simple integration into existing systems

*Image shows a higher protection class with housing as special design

*Weight by installation in switch cabinet

Voltage Current (A) Length mm(L)

Width mm(B)

Height mm(H)

Weight (kg)

400V50Hz

16 240 220 500 21

36 380 250 600 41

70 600 600 1800 158*

145 600 600 2000 204*

230 600 600 2000 241*

330 600 600 2000 267*

450 860 600 2000 296*

0,001 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

2,00

4,00

6,00

8,00

10,00

12,00

14,00

16,00

18,00

20,00

22,00

l [A]

0,001 2 3 4 5 6 7 8 9 10 11 12 13 14 15

2,00

4,00

6,00

8,00

10,00

12,00

0,001 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

2,00

4,00

6,00

8,00

10,00

12,00

14,00

16,00

18,00

20,00

22,00

l [A]

0,001 2 3 4 5 6 7 8 9 10 11 12 13 14 15

2,00

4,00

6,00

8,00

10,00

12,00

REOWAVE®passive – harmonic filter with a potential for savings

REOWAVE®passive doesn’t only give protection against harmonics – significant reduction of costs is also possible. The way that REOWAVE®passive works results in reductions in current and current harmonics, enabling significantly smaller fuses, cabling and transformers to be used. REOWAVE®passive therefore enables not only energy cost savings but also savings in equipment costs.

Current 25,7 A

I5 67 %

I7 43 %

THDI 81%

Current 19,7 A

I5 2,7 %

I7 1,8 %

THDI 4,4

Measurement on a converter without REOWAVE®passive

Converter without REOWAVE®passiveConverter with REOWAVE®passiveLimit value by EN 61000-3-12

Harmonics

Measurement on a converter with REOWAVE®passive

Naturally, REO harmonic filters can also be specially made to customer requirements.

Netz

Nichtlineare Last

REOWAVE

Netz Nichtlineare Last

REOWAVE

REOWAVE

Image 5: The design allows for the parallel connection of two REOWAVEpassive to increase the power capacity.

Image 6: Naturally several non-linear loads can be suppressed with a single REOWAVEpassive. The filter must merely be suitably rated for the required power.

Another advantage : simple integration into existing systems

In the development of the filter, REO has taken special care over simple integration into existing systems. Based on the “plug and play” idea, only the inputs and outputs of the filter need to be connected and the device will begin its cost-saving operation without problems from harmonics.

Thanks to the integral thermostat, a fan is switched on automatically as required. Another advantage of the REOWAVE®passive is the built-in mains choke. The latter ensures that only the interference in your area is suppressed, and no stray harmonics are filtered out of the mains.

Mains

Mains

Non-linear load

Non-linear load

REOWAVE®passive – approved REO quality

REOWAVEpassive is a filter unit which consists out of approved REO CNW components. This filter unit includes a REO mains filter and a REO harmonics filter. The mains filters function is the pre-supression of the mains as well as the shielding against external harmonics. It filters the harmonics caused by the B6 circuit (thyristor, diode bridge etc.), effects a preliminary suppression of network interference, screens the application from extraneous harmonics and enables a cost-saving in equipment selection and energy consumption.

Netz Nichtlineare Last

REONetzfilter

REOOberwellen-

filter

Umrichter/Prüfling

REOWAVE

The device has a user-friendly design and is available in four basic variants.

Typ Rated voltage Voltagetolerance

Rated current Cooling Test voltage Protection class

REOWAVE®passive 400

3 x 400 V 50 Hz

3 x 360 - 440 V 9 - 450 A

forced cooling, internal*

2500 V AC1 min

IP 20 at 9 - 110 A IP 54 at

> 110 A*

REOWAVE®passive 500

3 x 500 V 50 Hz

3 x 450 - 550 V 9 - 450 A

REOWAVE®passive 690

3 x 690 V 50 Hz

3 x 620 - 760 V 9 - 400 A

REOWAVE®passive 480

3 x 480 V 60 Hz

3 x 430 - 530 V 9 - 450 A

* in special design

Mains Non-linear load

REOMains filter

REOHarmonics

filter

Headquarters - GermanyREO ELEKTRONIK AGBrühler Straße 100 · D-42657 SolingenTel.: +49 (0)212 8804 0 · Fax: +49 (0)212 8804 188

REO INDUCTIVE COMPONENTS AGBrühler Straße 100 · D-42657 SolingenTel.: +49 (0)212 8804 0 · Fax: +49 (0)212 8804 188

E-Mail: [email protected]: www.reo.de

Divisions - GermanyREO INDUCTIVE COMPONENTS AG

TrainTechnologies DivisionCentre of Competence BerlinErasmusstraße 14 · D-10553 BerlinTel.: +49 (0)30 3670236 0 · Fax: +49 (0)30 3670236 10E-Mail: [email protected] · Internet: www.reo.de

Fertigung/ProductionTrainTechnologies DivisionEduard-Maurer-Straße 13 · D-16761 Hennigsdorf

IBK Drives DivisionHolzhausener Straße 52 · D-16866 KyritzTel.: +49 (0)33971 485 0 · Fax: +49 (0)33971 485 90E-Mail: [email protected] · Internet: www.reo.de

Setzermann Medical DivisionSchuldholzinger Weg 7 · D-84347 PfarrkirchenTel.: +49 (0)8561 9886 0 · Fax: +49 (0)8561 9886 40E-Mail: [email protected] · Internet: www.reo.de

Test and PowerQuality DivisionBrühler Straße 100 · D-42657 SolingenTel.: +49 (0)212 8804 0 · Fax: +49 (0)212 8804 188E-Mail: [email protected] · Internet: www.reo.de

ChinaREO Shanghai Inductive Components Co., LtdNo. 536 ShangFeng Road · Pudong, 201201 Shanghai · ChinaTel.: +86 (0)21 5858 0686 · Fax: +86 (0)21 5858 0289E-Mail: [email protected] · Internet: www.reo.cn

FranceREO VARIAC S.A.R.L.ZAC Du Clos aux Pois 1 · 6/8 rue de la Closerie-LISSES· F-91048 Evry CédexTel.: +33 (0)1 6911 1898 · Fax: +33 (0)1 6911 0918E-Mail: [email protected] · Internet: www.reo.fr

Great BritainREO (UK) Ltd.Units 2-4 Callow Hill Road · Craven Arms · Shropshire SY7 8NT · UKTel.: +44 (0)1588 673 411 · Fax: +44 (0)1588 672 718E-Mail: [email protected] · Internet: www.reo.co.uk

IndiaREO GPD INDUCTIVE COMPONENTS PVT. LTD2/202 Luna Road · Village Luna · Taluka PadraVadodara - 391440 · IndiaTel.: +91 (2662) 221723, +91 (265) 2396148 · Fax: +91 (265) 2396971 E-Mail: [email protected] · Internet: www.reo-ag.in

ItalyREO ITALIA S.r.l.Via Treponti, 29 · I-25086 Rezzato (BS)Tel.: +39 030 279 3883 · Fax: +39 030 279 0600E-Mail: [email protected] · Internet: www.reoitalia.it

PolandREO CROMA Sp.zo.oul. Pozaryskiego 28, bud 20 · PL-04-703 WarszawaTel.: +48 (0)22 812 3066 · Fax: +48 (0)22 815 6906E-Mail: [email protected] · Internet: www.croma.com.pl

RussiaREO RUSSIA Ltd.17/2, Dorozhnaya st., · Voronezh 394062 · RUSSIATel.: +7 (0)4732 202 453 · Fax: +7 (0)4732 707 011E-Mail: [email protected] · Internet: www.reo-russia.ru

SpainREO ESPAÑA 2002 S.A.C/Manuel Ventura i Campeny 21B · local 9 · E-08339 Vilassar de Dalt (Barcelona) Tel.: +34 937 509 994 · Fax: +34 937 509 995E-Mail: [email protected] · Internet: www.reospain.com

SwitzerlandREO ELEKTRONIK AGIm Halbiacker 5a · CH-8352 ElsauTel.: +41 (0)52 363 2820 · Fax: +41 (0)52 363 1241E-Mail: [email protected] · Internet: www.reo.ch

Turkey REOTURKEY ELEKTRONIK San. ve Tic. Ltd. Şti. Halil Rıfatpasa Mah. · Darülceze CD Perpa Tic MerkeziB Blok Kat 8 No:1095 · TR-34384 Sisli – IstanbulTel.: +90 (0)212 2215 118 · Fax: +90 (0)212 2215 119E-Mail: [email protected] · Internet: www.reo-turkey.com

USAREO-USA, Inc.8450 E. 47th St · USA-Indianapolis, IN 46226Tel.: +1 (317) 899 1395 · Fax: +1 (317) 899 1396E-Mail: [email protected] · Internet: www.reo-usa.com