reproduction, also by extracting and reproducing photos ... › uploads › stainless steel... ·...

All rights reserved.Reproduction, also by extracting and reproducing photos are only permitted with written authorization of mahe medical GmbH.

All offers, orders and deliveries are subject to mahe medical GmbH “General Sales and Delivery Terms”. We reserve the right to modify our range of products and their design as well as to deviate from the illustrations and data shown.

1

OSTEOSYNTHESIS – STEEL IMPLANTS OSTEOSYNTHESIS – STEEL IMPLANTS (Bone: Plates / Screws / Pins / Wires / Staples ) non-sterile IMPLANT MATERIAL:IMPLANT MATERIAL: Implants made from steel in accordance with ISO 5832-1 stainless steel; ISO 5832-9 high nitrogen stainless steel manufactured by MAHE medical GmbHThe surface of these implants is chemically passive: not magnetic.These implants can be combined with the standardised material provided that its composition lies within the analysis stipulated in the ISO 5832-1 / ISO 5832-9 standard and the required specifications.Material alloys with chrome-nickel (implant steel) components can trigger a so-called chrome-nickel allergy by their nature; there are no other known biocompatible hazards!

INSTRUCTIONS FOR USE 3.INSTRUCTIONS FOR USE 3. (GB)(GB)Warning: The implants described may only be used in combination with MAHE products!Warning: The implants described may only be used in combination with MAHE products!

INDICATIONSINDICATIONSThese relate to the current practice of applications of implants in osteosynthesis (e.g. see literature AO/ASIF Instruments and Implants Texhammer*Colton ISBN 3-540-56895-6 / ISBN 0-387-56895-6).

CONTRAINDICATIONSCONTRAINDICATIONSAcute and chronic infections; muscle, nerve or vascular diseases that endanger the affected extremity; a lack of bony tissue or bony tissue or bony tissue or poor bone quality (e.g. severe osteoporosis); local bone tumours. Systemic diseases and metabolic disorders; infections and falls; drug dependence; obesity; highly physical activities together with activities involving extreme vibrations which can lead to overstraining of the implants.

STERILISER : Steam autoclave: Temperature = 121° to 123° Celsius; Pressure = 1 - 1.2 bar (15 to 17 psi) with an exposure time of with an exposure time of with an exposure time of at least 30 minutes in the packaged state.

STERILISER : Autoclave with prevacuum: During the prevacuum phase the air is extracted from the chamber before the steam flows in. Standard circulation for packaged objects: 132° to 135° Celsius; Pressure = 2 - 3 bar (27 to 30 psi) with an exposure time of at least 4 to 10 minutes.

IMPORTANT NOTES: Every time the implants are used or sterilised you must first check that they function perfectly!IMPORTANT NOTES: Every time the implants are used or sterilised you must first check that they function perfectly!In the event of failure to observe these instructions or demonstrable violation, no guarantee or compensation for damages can be provided.

NOTESNOTESThe user should record and keep all information provided to the patient. It should be checked before use whether the patient tolerates the material to be implanted. The implants described in these instructions for use may only be used (implanted) by surgeons with the appropriate experience.

REMOVAL OF IMPLANTSREMOVAL OF IMPLANTSThe implants are normally removed once the fracture has healed.CLEANING AND STERILISATION OF UNSTERILE IMPLANTSCLEANING AND STERILISATION OF UNSTERILE IMPLANTSBefore use, the implants must be sterilised using a validated procedure (autoclaved).

MAHE medical GmbH VALIDATED PROCEDURESMAHE medical GmbH VALIDATED PROCEDURES

POSSIBLE NEGATIVE EFFECTS (RISKS)POSSIBLE NEGATIVE EFFECTS (RISKS)Failure of the fracture to heal, allergy to the material, failure of the product (break, bending), bone deformation and refracture, infection.

- When selecting implants (bone: plates / screws / pins / wires / clips), care must be taken to choose the appropriate implants on the basis of the weight and level of activity of the patient, and the bone fracture to be treated.- Note that by making the correct choice of biomechanics the forces to be transferred by the implants remain low.- Extreme deformation of the implants must be avoided; the cautious bending of wires, plates and pins does not, however, lead to implant damage provided it is done with sufficient care.- Repeated deformation should be avoided at all costs as it will fatigue the implant material.- The re-use of implants is absolutely forbiddenThe re-use of implants is absolutely forbidden (single use). (single use).- We strongly advise you to inform patients of the advantages and disadvantages of implants.- Excessive strain as a result of body weight and the level of activity of the patient should be avoided due to the limited strength of the implants. Failure to observe these precautionary measures can have serious consequences for the healing process.

We would point out that implants only function correctlyWe would point out that implants only function correctlyif the following basic rules are observed :if the following basic rules are observed :

2

SET-011-0010-003 MINI FRAGMENT BASIC INSTRUMENT-AND IMPLANT SET

Ref. No. PRODUCT-DESCRIPTION: Instruments PCS .:TRAY-011-0010-003 Tray for mini fragment basic instrument-and implant SET-011-0010-003

(Graphic Case)-1-

005-0210-011 Drill bit – AO shaft Ø 1.1 mm x length 60 mm / 35 mm -2-




005-0210-088 Countersink – AO dental shaft for mini screws Ø 1.5 mm / Ø 2.0 mm -1-

005-0210-089 Small countersink Ø 3.5 mm used for Ø2 .7 mm/Ø 3.5 mm Ø 4.0 mm screws, tip Ø 2.0 mm -1-

005-0210-095 Tap handle for dental shaft -1-

005-0211-015 Tap dental shaft Ø 1.5 mm used for Ø 1.5 mm cortical screws -2-

005-0211-019 Tap dental shaft Ø 2.0 mm used for Ø 2.0 mm cortical screws -2-

005-0211-026 Tap AO shaft Ø 2.7 mm with cortical pitch 1.0 mm used for Ø 2.7 mm cortical screws -2-

005-0211-043 Tap handle with AO – quick coupling -1-

005-0212-015 Mini drill sleeve used for Ø 1.1 mm / Ø 1.5 mm drill bits -1-

005-0212-020 Drill guide 2.0 mm within 3/1 hole used for Ø 2.0 mm drill bit and K-wire Ø 2.0 mm -1-

005-0212-026 Tap sleeve Ø 3.5 mm, also use as Ø 3.5 mm drill guide -1-

005-0219-003 Depth gauge used for Ø 1.5 mm up to Ø 2.0 mm screws -1-

005-0219-004 Depth gauge used for Ø 2.7 mm up to Ø 4.0 mm screws -1-

005-0219-039 Sharp - hook -1-

005-0219-097 Screw holding forceps -1-

005-0229-001 Bending iron for mini and finger plates -1-

009-0390-015 Mini hex. screw driver with self-holding sleeve (hex. flats 1.5 mm) used for Ø 1.5 mm / Ø 2.0 mm screws

-1-

009-0390-025 Small hex. screw driver with self-holding sleeve (hex. flats 2.5 mm) used for Ø 2.7 mm / Ø 3.5 mm / Ø 4.0 mm screws

-1-

010-0020-090 Reduction forceps with points, length 135 mm -1-

010-0020-350 Small hohmann retractor 6 mm -1-

010-0020-352 Small hohmann retractor 8 mm -1-

010-0020-354 Small hohmann retractor with broad shank -2-

010-0020-800 Periosteal elevator, extra small, curved blade and straight edge, width 3 mm -1-

005-0717-012 Holding forceps 12 cm -1-

SET - LISTING - CONTENT FOR SET : SET-011-0010-003

TRAY-011-0010-003 Tray for Mini Fragment Basic Instrument -and Implant SET-011-0010-003 ( Graphic Case Steel )

INDEX: SET -011-0010-003 SET– LISTING – CONTENT: ( PAGE 2 UP TO PAGE 4) : INSTRUMENTS & IMPLANTS

3


Ref. No. PRODUCT-DESCRIPTION: K-WIRES PCS .:004-0310-010 K-wire with single trocar point Ø 1.0 mm x length 150 mm, round end -10-

004-0310-012 K-wire with single trocar point Ø 1.2 mm x length 150 mm, round end -10-




Ref. No. PRODUCT-DESCRIPTION: Steel Fullthreaded Cortical Screws Ø 1.0 mm PCS .:001-0001-006 Ø 1.5 mm x length 6 mm -4-

001-0001-007 Ø 1.5 mm x length 7 mm -4-

001-0001-008 Ø 1.5 mm x length 8 mm -4-

001-0001-009 Ø 1.5 mm x length 9 mm -4-

001-0001-010 Ø 1.5 mm x length 10 mm -4-

001-0001-011 Ø 1.5 mm x length 11 mm -4-

001-0001-012 Ø 1.5 mm x length 12 mm -4-

001-0001-014 Ø 1.5 mm x length 14 mm -4-

001-0001-016 Ø 1.5 mm x length 16 mm -4-

Ref. No. PRODUCT-DESCRIPTION: Steel Fullthreaded Cortical Screws Ø 2.0 mm PCS .:001-0002-006 Ø 2.0 mm x length 6mm -6-

001-0002-008 Ø 2.0 mm x length 8mm -6-

001-0002-010 Ø 2.0 mm x length 10mm -6-

001-0002-012 Ø 2.0 mm x length 12mm -6-

001-0002-014 Ø 2.0 mm x length 14mm -6-

001-0002-016 Ø 2.0 mm x length 16mm -6-

001-0002-018 Ø 2.0 mm x length 18mm -6-

001-0002-020 Ø 2.0 mm x length 20mm -6-

Ref. No. PRODUCT-DESCRIPTION: Steel Fullthreaded Cortical Screws Ø 2.7 mm PCS .:001-0003-006 Ø 2.7 mm x length 6 mm -6-

001-0003-008 Ø 2.7 mm x length 8 mm -6-

001-0003-010 Ø 2.7 mm x length 10 mm -6-

001-0003-012 Ø 2.7 mm x length 12 mm -6-

001-0003-014 Ø 2.7 mm x length 14 mm -6-

001-0003-016 Ø 2.7 mm x length 16 mm -6-

001-0003-018 Ø 2.7 mm x length 18 mm -6-

001-0003-020 Ø 2.7 mm x length 20 mm -6-

001-0003-022 Ø 2.7 mm x length 22 mm -6-

001-0003-024 Ø 2.7 mm x length 24 mm -6-

Ref. No. PRODUCT-DESCRIPTION: Steel Washer PCS .:001-0013-001 Washer for Ø 2.7 mm screws -6-

Ref. No. PRODUCT-DESCRIPTION: Steel Plates for Ø2.7mm Screws PCS .:002-0060-007 Small T-plate length 32 mm x 3 holes, 2.7 mm -4-

002-0060-004 Small L-plate length 34.5 mm x 3 holes, Oblique LEFT, 2.7 mm -2-

002-0060-005 Small L-plate length 34.5 mm x 3 holes, Oblique RIGHT, 2.7 mm -2-

002-0014-023 Quarter tubular plate, length 23 mm x 3 holes, 2.7 mm -2-






SET - LISTING - CONTENT FOR SET : SET-011-0010-003INDEX: SET -011-0010-003 SET– LISTING – CONTENT: ( PAGE 2 UP TO PAGE 4) : INSTRUMENTS & IMPLANTS

4

SET - LISTING - CONTENT FOR SET: SET - 011 - 0010 - 003


INDEX: SET -011-0010-003 SET– LISTING – CONTENT: ( PAGE 2 UP TO PAGE 4) : INSTRUMENTS & IMPLANTS

Ref. No. PRODUCT - DESCRIPTION: Steel Plates for Ø 1.5 mm and Ø 2.0 mm Screws

PCS .:

002-0065-007 Mini T-plate 2 holes, 2.0 mm -4-

002-0065-001 Mini L-plate 2 holes, Oblique LEFT, 2.0 mm -2-

002-0065-002 Mini L-plate 2 holes, Oblique RIGHT, 2.0 mm -2-

002-0074-017 Mini plate straight 3 holes x length 17 mm, 2.0 mm -2-

002-0074-023 Mini plate straight 4 holes x length 23 mm, 2.0 mm -2-

002-0074-029 Mini plate straght 5 holes x length 29 mm, 2.0 mm -2-

RECOMMENDED STERILIZATION CONTAINER FOR SET -011-0010-003Ref. No. STERILIZATION CONTAINER

C-110-135 1/1 Size container, bottom non perforated outside 580x 80x135 mm / inside 550x265x115 mm

5

INSTRUMENTS FOR MINI FRAGMENT SYSTEM

005-0211-015 Tap dental shaft Ø 1.5 mm used for Ø 1.5 mm cortical screws

005-0211-019 Tap dental shaft Ø 2.0 mm used for Ø 2.0 mm cortical screws

005-0211-026 Tap AO shaft Ø 2.7 mm with cortical pitch 1.0 mm used for Ø 2.7 mm cortical screws

005-0210-088 Countersink – AO dental shaft for mini screws Ø 1.5 mm / Ø 2.0 mm

005-0210-095 Tap handle for dental shaft

005-0211-043 Tap handle with AO – quick coupling

005-0212-015 Mini double drill sleeve used for Ø 1.1 mm / Ø 1.5 mm drill bits

005-0212-016 Mini double drill sleeve used for Ø 1.5 mm / Ø 2.0 mm drill bits

005-0210-089 Small countersink Ø 3.5 mm used for Ø 2.7 mm / Ø 3.5 mm / Ø 4.0 mm screws, tip Ø 2.0 mm

005-0210-011 Drill bit – AO shaft Ø 1.1 mm x length 60 mm / 35 mm






005-0210-211 Drill bit – round shaft Ø 1.1 mm x length 45mm / 30mm




6


005-0212-020 Drill guide 2.0mm within 3/1 hole used for Ø 2.0 mm drill bit and K-wire Ø 2.0 mm

005-0212-017 Double drill sleeve used for Ø 2.0 mm / Ø 2.7 mm drill bits

005-0212-021 Universal drill guide 2.7 mm / 2.0 mm used for tap Ø 2.7 mm drill bit and K-wire Ø 2.0 mm applicable for neutral load and compression position

005-0212-026 Tap sleeve Ø 3.5 mm, also use as Ø 3.5 mm drill guide

005-0219-003 Depth gauge used for Ø 1.5 mm up to Ø 2.0 mm screws

005-0219-004 Depth gauge used for Ø 2.7 mm up to Ø 4.0 mm screws

005-0219-039 Sharp - hook

005-0219-097 Screw holding forceps

7


005-0229-001 Bending iron for mini and finger plates

005-0229-004 Bending iron for 3.5 mm / 2.7 mm plates

005-0229-005 Bending iron for 2.7 mm / 3.5 mm plates

009-0390-025 Small hex. screw driver with self-holding sleeve (hex. flats 2.5 mm) used for Ø 2.7 mm / Ø 3.5 mm / Ø 4.0 mm screws

009-0390-015 Mini hex. screw driver with self-holding sleeve (hex. flats 1.5 mm) used for Ø 1.5 mm/Ø 2.0 mm screws

009-0390-052 Self-holding sleeve

009-0368-025 Small hex. screw driver for self-holding sleeve (hex. flats 2.5 mm) used for Ø 2.7 mm / Ø 3.5 mm / Ø 4.0 mm screws

009-0390-060 Coupling self-holding sleeve for screw driver REF. 009-0368-025

8


010-0020-350 Small hohmann retractor 6 mm

010-0020-352 Small hohmann retractor 8 mm

010-0020-354 Small hohmann retractor with broad shank

010-0020-800 Periosteal elevator, extra small, curved blade and straight edge, width 3 mm

010-0020-802 Periosteal elevator, small, curved blade and straight edge, width 6 mm

005-0717-012 Holding forceps 12 cm

010-0020-090 Reduction forceps with points, length 135 mm

010-0020-088 Reposition forceps curved with ratchet fixation, one point tip, length 135 mm

9

010-0020-050 Verbrügge bone holding forceps, length 175 mm

INS-8207-00 Inge 16.0 cm


010-0020-092 Reposition forceps curved with ratchet fixation, length 145 mm

010-0020-070 Self-centering bone holding forceps, length 150 mm

INS-8205-10 Scarf bone holding forceps

10

005-0229-015 Bending pliers for 2.4 mm up to 4.0 mm plates, length 23.0 cm

005-0229-016 Bending pliers for 1.0 mm up to 2.0 mm plates, length 20.0 cm

005-0229-010 Wire bending pliers

004-1000-012 TC-wire cutter 180 mm used for soft wire Ø 2.0 mm - hard wire Ø 1.5 mm

004-1000-014 TC-wire cutter 220mm used for soft wire Ø 3.0 mm - hard wire Ø 2.5 mm


005-0229-070 Bending bolt for K-wires Ø 0.8 mm up to Ø 2.5 mm

11

004-0310-010 K-wire with single trocar point Ø 1.0 mm x length 150 mm, round end






MIMI-LAMBOTTE OSTEOTOME

K-WIRES TROCAR WITH ROUND END

PROFILE

Trocar-Round

010-0020-401 Partsch mallet Ø 22 mm, weight 200g, length 19 cm

010-0020-751 Mini-Lambotte Osteotome width 3 mm, length 12.5 cm / 5”





010-0020-761 Mini-Lambotte Osteotome width 3 mm, length 17 cm / 6 ¼”





12

Ref. No. Diameter and complete Length001-0001-006 Ø 1.5 mm x length 6 mm

001-0001-007 Ø 1.5 mm x length 7 mm

001-0001-008 Ø 1.5 mm x length 8 mm

001-0001-009 Ø 1.5 mm x length 9 mm

001-0001-010 Ø 1.5 mm x length 10 mm

001-0001-011 Ø 1.5 mm x length 11 mm

001-0001-012 Ø 1.5 mm x length 12 mm

001-0001-014 Ø 1.5 mm x length 14 mm

001-0001-016 Ø 1.5 mm x length 16 mm

001-0001-018 Ø 1.5 mm x length 18 mm

001-0001-020 Ø 1.5 mm x length 20 mm

Ref. No. Diameter and complete Length001-0001-006S Ø 1.5 mm x length 6 mm

001-0001-007S Ø 1.5 mm x length 7 mm

001-0001-008S Ø 1.5 mm x length 8 mm

001-0001-009S Ø 1.5 mm x length 9 mm

001-0001-010S Ø 1.5 mm x length 10 mm

001-0001-011S Ø 1.5 mm x length 11 mm

001-0001-012S Ø 1.5 mm x length 12 mm

001-0001-014S Ø 1.5 mm x length 14 mm

001-0001-016S Ø 1.5 mm x length 16 mm

001-0001-018S Ø 1.5 mm x length 18 mm

001-0001-020S Ø 1.5 mm x length 20 mm

STAINLESS STEEL MINI FRAGMENT DIA. 1.5 MM CORTICAL SCREW IMPLANTS

STAINLESS STEEL MINI FRAGMENT DIA. 1.5 MM CORTICAL SCREW IMPLANTS,SELF-TAPPING

Product – Description:Stainless Steel Cortical Screw, Fullthreaded Ø 1.5 mm Important Technical Dimensions:Head Diameter Ø 3.0 mmHexagonal Socket width 1.5 mmCore Diameter for cortical Thread Ø 1.0 mmThread Diameter Ø 1.5 mmThread Pitch 0.5 mmApplicable Drill Bit for gliding Hole Ø 1.5 mm Applicable Drill Bit for Thread Hole Ø 1.1 mmUsed Tap Ø 1.5 mm Material: Stainless Steel

Product – Description:Stainless Steel Cortical Screw, Fullthreaded Ø 1.5 mm Important Technical Dimensions:Head Diameter Ø 3.0 mmHexagonal Socket width 1.5 mmCore Diameter for cortical Thread Ø 1.0 mmThread Diameter Ø 1.5 mmThread Pitch 0.5 mmApplicable Drill Bit for gliding Hole Ø 1.5 mm Applicable Drill Bit for Thread Hole Ø 1.1 mmNote: tapping is not applicable!Material: Stainless Steel

MINI FRAGMENT DIA. 1.5 MM SCREWS

13


001-0002-008 Ø 2.0 mm x length 8 mm

001-0002-010 Ø 2.0 mm x length 10 mm

001-0002-012 Ø 2.0 mm x length 12 mm

001-0002-014 Ø 2.0 mm x length 14 mm

001-0002-016 Ø 2.0 mm x length 16 mm

001-0002-018 Ø 2.0 mm x length 18 mm

001-0002-020 Ø 2.0 mm x length 20 mm

001-0002-022 Ø 2.0 mm x length 22 mm

001-0002-024 Ø 2.0 mm x length 24 mm

001-0002-026 Ø 2.0 mm x length 26 mm

001-0002-028 Ø 2.0 mm x length 28 mm

001-0002-030 Ø 2.0 mm x length 30 mm

001-0002-032 Ø 2.0 mm x length 32 mm

001-0002-034 Ø 2.0 mm x length 34 mm

001-0002-036 Ø 2.0 mm x length 36 mm

001-0002-038 Ø 2.0 mm x length 38 mm


001-0002-008S Ø 2.0 mm x length 8 mm

001-0002-010S Ø 2.0 mm x length 10 mm

001-0002-012S Ø 2.0 mm x length 12 mm

001-0002-014S Ø 2.0 mm x length 14 mm

001-0002-016S Ø 2.0 mm x length 16 mm

001-0002-018S Ø 2.0 mm x length 18 mm

001-0002-020S Ø 2.0 mm x length 20 mm

001-0002-022S Ø 2.0 mm x length 22 mm

001-0002-024S Ø 2.0 mm x length 24 mm

001-0002-026S Ø 2.0 mm x length 26 mm

001-0002-028S Ø 2.0 mm x length 28 mm

001-0002-030S Ø 2.0 mm x length 30 mm

001-0002-032S Ø 2.0 mm x length 32 mm

001-0002-034S Ø 2.0 mm x length 34 mm

001-0002-036S Ø 2.0 mm x length 36 mm

001-0002-038S Ø 2.0 mm x length 38 mm


STAINLESS STEEL MINI FRAGMENT DIA. 2.0 MM CORTICAL SCREW IMPLANTS, SELF-TAPPING




14


001-0003-008 Ø 2.7 mm x length 8 mm

001-0003-010 Ø 2.7 mm x length 10 mm

001-0003-012 Ø 2.7 mm x length 12 mm

001-0003-014 Ø 2.7 mm x length 14 mm

001-0003-016 Ø 2.7 mm x length 16 mm

001-0003-018 Ø 2.7 mm x length 18 mm

001-0003-020 Ø 2.7 mm x length 20 mm

001-0003-022 Ø 2.7 mm x length 22 mm

001-0003-024 Ø 2.7 mm x length 24 mm

001-0003-026 Ø 2.7 mm x length 26 mm

001-0003-028 Ø 2.7 mm x length 28 mm

001-0003-030 Ø 2.7 mm x length 30 mm

001-0003-032 Ø 2.7 mm x length 32 mm

001-0003-034 Ø 2.7 mm x length 34 mm

001-0003-036 Ø 2.7 mm x length 36 mm

001-0003-038 Ø 2.7 mm x length 38 mm

001-0003-040 Ø 2.7 mm x length 40 mm

001-0003-042 Ø 2.7 mm x length 42 mm

001-0003-045 Ø 2.7 mm x length 45 mm

001-0003-046 Ø 2.7 mm x length 46 mm

001-0003-048 Ø 2.7 mm x length 48 mm

001-0003-050 Ø 2.7 mm x length 50 mm

001-0003-055 Ø 2.7 mm x length 55 mm

001-0003-060 Ø 2.7 mm x length 60 mm


001-0003-008S Ø 2.7 mm x length 8 mm

001-0003-010S Ø 2.7 mm x length 10 mm

001-0003-012S Ø 2.7 mm x length 12 mm

001-0003-014S Ø 2.7 mm x length 14 mm

001-0003-016S Ø 2.7 mm x length 16 mm

001-0003-018S Ø 2.7 mm x length 18 mm

001-0003-020S Ø 2.7 mm x length 20 mm

001-0003-022S Ø 2.7 mm x length 22 mm

001-0003-024S Ø 2.7 mm x length 24 mm

001-0003-026S Ø 2.7 mm x length 26 mm

001-0003-028S Ø 2.7 mm x length 28 mm

001-0003-030S Ø 2.7 mm x length 30 mm

001-0003-032S Ø 2.7 mm x length 32 mm

001-0003-034S Ø 2.7 mm x length 34 mm

001-0003-036S Ø 2.7 mm x length 36 mm

001-0003-038S Ø 2.7 mm x length 38 mm

001-0003-040S Ø 2.7 mm x length 40 mm

001-0003-042S Ø 2.7 mm x length 42 mm

001-0003-045S Ø 2.7 mm x length 45 mm

001-0003-046S Ø 2.7 mm x length 46 mm

001-0003-048S Ø 2.7 mm x length 48 mm

001-0003-050S Ø 2.7 mm x length 50 mm

001-0003-055S Ø 2.7 mm x length 55 mm

001-0003-060S Ø 2.7 mm x length 60 mm


STAINLESS STEEL MINI FRAGMENT DIA. 2.7 MM CORTICAL SCREW IMPLANTS, SELF-TAPPING




001-0013-001 Washer for Ø 2.7 mm screws

15

MINI FRAGMENT 1.5 MM PLATES

STAINLESS STEEL MINI FRAGMENT MINI H-PLATE 1.5 MMMini H-Plate 1.5 mm with oval Holes used with Ø1.5 mm steel cortical screws Mainly applicable for Re-Implantation of transversely amputated Fingers Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 9.0 mm x 8.2 mmDistance Hole / 5.0 mm x 4.2 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini H- Plate 1.5 mm

Ref. No. Complete Length and Holes002-0049-009 length 9.0 mm x 4 hole

STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 1.5 MMMini T-Plates 1.5 mm with oval Holes used with Ø 1.5 mm steel cortical screws Mainly applicable in the distal or proximal ends phalanges Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 3.8 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini T-Plate 1.5 mm

Ref. No. Complete Length and Holes002-0049-003 length 50 mm x 9 hole in shaft + 3 hole in head

002-0049-004 length 50 mm x 9 hole in shaft + 4 hole in head

STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATE 1.5 MMStraight Mini Plate 1.5 mm with oval Holes used with Ø 1.5 mm steel cortical screws Mainly applicable in phalangeal Fractures Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 3.8 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plate 1.5 mm

Ref. No. Complete Length and Holes002-0049-001 Length 100 mm x 20 Hole

16


STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 1.5 MM

Mini Condylar Plate 1.5 mm with oval Holes used with Ø 1.5 mm steel cortical screws Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 3.8 mmDistance Hole / Shaft 5.0 mmPin Length 14 mm x Pin width 2.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini Condylar Plate 1.5 mm

Ref. No. Complete Length and Holes Ref. No. Complete Length and Holes002-0049-010L length 26 mm x 6 hole LEFT 002-0049-010R length 26 mm x 6 hole RIGHT

17


STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI ADAPTION PLATE 2.0 MM

Straight Mini Adaption Plate 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable as a Reconstruction Finger Plate Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plate 2.0 mm

Ref. No. Complete Length and Holes002-0062-014 length 100 mm x 20 hole

STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MMStraight Mini Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in Hand and - Foot Fractures Important technical Dimensions:Thickness 1.0 mm Broad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plates 2.0 mm


002-0061-027 length 27 mm x 5 hole

002-0061-032 length 32 mm x 6 hole

002-0061-037 length 37 mm x 7 hole

002-0061-042 length 42 mm x 8 hole

18


STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MMStraight Mini Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in Hand and – Foot Fractures Important technical Dimensions:Thickness 1.5 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plates 2.0 mmRef. No. Complete Length and Holes002-0063-032 length 32 mm x 6 hole

002-0063-037 length 37 mm x 7 hole

002-0063-042 length 42 mm x 8 hole

002-0063-047 length 47 mm x 9 hole

002-0063-052 length 52 mm x 10 hole

STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.0 MMStraight Mini Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable for diaphyseal Fractures of the Phalanges Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 6.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plates 2.0 mm


002-0074-023 length 23 mm x 4 hole

002-0074-029 length 29 mm x 5 hole

002-0074-035 length 35 mm x 6 hole

19


STAINLESS STEEL MINI FRAGMENT STRAIGHT LOW TOUCH MINI PLATES 2.0 MMStraight Low Touch Mini Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable for diaphyseal Fractures of the Phalanges Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 4.0 mmDistance Hole / Shaft 6.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Low Touch Mini Plates 2.0 mm


002-0069-029 length 29 mm x 5 hole

002-0069-035 length 35 mm x 6 hole

002-0069-041 length 41 mm x 7 hole

002-0069-047 length 47 mm x 8 hole

002-0069-053 length 53 mm x 9 hole

002-0069-059 length 59 mm x 10 hole

002-0069-119 length 119 mm x 20 hole

STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATE 2.0 MMStraight Mini Plate 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in phalangeal Fractures Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Straight Mini Plate 2.0 mm


20


STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.0 MMMini T-Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 6.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini T-Plates 2.0 mm


STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.0 MM, 90° ANGLEDMini L-Plates 2.0 mm, 90° Angled with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 6.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini L-Plates 2.0 mm, 90° Angled

Ref. No. Complete Length and Holes002-0065-005 length 18 mm x 2 hole in shaft + 2 hole in head, 90° RIGHT

002-0065-004 length 18 mm x 2 hole in shaft + 2 hole in head, 90° LEFT

STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.0 MM, OBLIQUE ANGLEDMini L-Plates 2.0 mm, Oblique Angled with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 6.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini L-Plates 2.0 mm, Oblique Angled

Ref. No. Complete Length and Holes002-0065-002 length 20 mm x 2 hole in shaft + 2 hole in head, Oblique RIGHT

002-0065-001 length 20 mm x 2 hole in shaft + 2 hole in head, Oblique LEFT

21


STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.0 MMMini T-Plates 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in the distal or proximal ends phalanges Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini T-Plates 2.0 mm



STAINLESS STEEL MINI FRAGMENT MINI H-PLATE 2.0 MMMini H-Plate 2.0 mm with oval Holes used with Ø2.0 mm steel cortical screws Mainly applicable for Re -Implantation of transversely amputated Fingers Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 11.0 mm x 12.0 mmDistance Hole / 7.0 mm x 6.0mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini H-Plate 2.0 mm


22


STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 2.0 MMMini Condylar Plate 2.0 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 5.0 mmDistance Hole / Shaft 5.0 mmPin Length 14 mm x Pin width 2.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini Condylar Plate 2.0 mm


23


STAINLESS STEEL MINI FRAGMENT STRAIGHT MINI PLATES 2.7 MMStraight Mini Plates 2.7 mm with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable in Mandibular, but also found Application in metacarpal and metatarsal Fractures Important technical Dimensions:Thickness 2- 6 ( hole ) 2.0 mmThickness 7-12 ( hole ) 2.5 mmBroad / Shaft 8.0 mmDistance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0 mm except for 002-0072-020-L=16.8 mm Material: Stainless SteelProduct Description:Stainless Steel Straight Mini Plates 2.7 mm


002-0072-020-L length 26 mm x 2 hole

002-0072-028 length 28 mm x 3 hole

002-0072-036 length 36 mm x 4 hole

002-0072-044 length 44 mm x 5 hole

002-0072-052 length 52 mm x 6 hole

002-0072-060 length 60 mm x 7 hole

002-0072-068 length 68 mm x 8 hole

002-0072-076 length 76 mm x 9 hole

002-0072-084 length 84 mm x 10 hole

002-0072-092 length 92 mm x 11 hole

002-0072-100 length 100 mm x 12 hole

002-0072-108 length 108 mm x 13 hole

002-0072-116 length 116 mm x 14 hole

24

STAINLESS STEEL MINI FRAGMENT STRAIGHT LOW TOUCH MINI PLATES 2.7 MMStraight Low Touch Mini Plates 2.7 mm with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable in Mandibular, but also found Application in metacarpal and metatarsal Fractures Important technical Dimensions:Thickness 2- 6 ( hole ) 2.0 mmThickness 7-12 ( hole ) 2.5 mmBroad / Shaft 8.0 mmDistance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0 mm Material: Stainless SteelProduct Description:Stainless Steel Straight Low Touch Mini Plates 2.7 mm


002-0073-028 length 28 mm x 3 hole

002-0073-036 length 36 mm x 4 hole

002-0073-044 length 44 mm x 5 hole

002-0073-052 length 52 mm x 6 hole

002-0073-060 length 60 mm x 7 hole

002-0073-068 length 68 mm x 8 hole

002-0073-076 length 76 mm x 9 hole

002-0073-084 length 84 mm x 10 hole

002-0073-092 length 92 mm x 11 hole

002-0073-100 length 100 mm x 12 hole


25


STAINLESS STEEL MINI FRAGMENT QUARTER TUBULAR MINI PLATES 2.7 MMQuarter Tubular Mini Plates 2.7 mm with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable as tension band Plates in Fractures of metacarpal and metatarsal Bones Important technical Dimensions:Thickness 1.0 mmBroad / Shaft 78.0 mmDistance Hole / Shaft 8.0 mm, Distance between middle Holes 11,0 mm Material: Stainless SteelProduct Description:Stainless Steel Quarter Tubular Mini Plates 2.7 mm


002-0014-031 length 31 mm x 4 hole

002-0014-039 length 39 mm x 5 hole

002-0014-047 length 47 mm x 6 hole

002-0014-055 length 55 mm x 7 hole

002-0014-063 length 63 mm x 8 hole

002-0014-071 length 71 mm x 9 hole

002-0014-079 length 79 mm x 10 hole

26


STAINLESS STEEL MINI FRAGMENT MINI CONDYLAR PLATE 2.7 MM

Mini Condylar Plate 2.7 mm with oval Holes used with Ø 2.0 mm steel cortical screws Mainly applicable in fractures or osteotomies near the metacarphalangeal (MP) or proximal interphalangeal (PIP) joints Important technical Dimensions:Thickness 1.5 mmBroad / Shaft 7.0 mmDistance Hole / Shaft 8.0 mmPin Length 20 mm x Pin width 2.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini Condylar Plate 2.7 mm


27


STAINLESS STEEL MINI FRAGMENT MINI MULTIFRAGMENT PLATE 2.7 MMMini Multifragment Plate 2.7 mm with round Holes used with Ø 2.7 mm steel cortical screws Mainly applicable for metacarpal and metatarsal Fractures Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 14.5 mmDistance Hole / Shaft 8.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini Multifragment Plate 2.7 mm


STAINLESS STEEL MINI FRAGMENT MINI T-PLATES 2.7 MMMini T-Plates 2.7 mm with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 7.0 mmDistance Hole / Shaft 8.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini T-Plates 2.7 mm







28


STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.7 MM, 90° ANGLEDMini L-Plates 2.7 mm, 90° Angled with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 7.0 mmDistance Hole / Shaft 8.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini L-Plate 2.7 mm, 90° Angled

Ref. No. Complete Length and Holes002-0060-002 length 32 mm x 3 hole in shaft + 2 hole in head, 90° RIGHT

002-0060-001 length 32 mm x 3 hole in shaft + 2 hole in head, 90° LEFT

STAINLESS STEEL MINI FRAGMENT MINI L-PLATES 2.7 MM, OBLIQUE ANGLEDMini L-Plates 2.7 mm, Oblique Angled with oval Holes used with Ø 2.7 mm steel cortical screws Mainly applicable in the distal or proximal ends of the metacarpal Bones Important technical Dimensions:Thickness 1.2 mmBroad / Shaft 7.2 mmDistance Hole / Shaft 8.0 mmMaterial: Stainless SteelProduct Description:Stainless Steel Mini L-Plates 2.7 mm, Oblique Angled

Ref. No. Complete Length and Holes002-0060-005 length 34.5 mm x 3 hole in shaft + 2 hole in head, Oblique RIGHT

002-0060-004 length 34.5 mm x 3 hole in shaft + 2 hole in head, Oblique LEFT

29

Notes

reproduction, also by extracting and reproducing photos ... › uploads › stainless steel... ·...

Documents