request for quotation/user requirement specificationqms.ccholdingsltd.com/p3026f(2) user...
TRANSCRIPT
Document No. XXXX/NNNN
Version: A Page 1 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
Request for Quotation/User Requirement
specification
for
machine/system name
Engineering Study Protocol Approval Author Print Name
Signature Date
Production Manager Print Name
Signature Date
Engineering Manager Print Name
Signature Date
Quality Manager Print Name
Signature Date
Toolmaker Print Name
Signature Date
Document No. XXXX/NNNN
Version: A Page 2 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
1 Revision History
Revision Author Date Reason for Change
2 Introduction
The Purpose of this document is to define Haag Streit UK’s user requirement specifications for the
manufacture of the intended ZZZZ mould tool that will be used to manufacture XXX component for the
YYY Device.
Insert component drawings
3 Scope
This URS will only apply to ZZZZ mould tool which is intended to manufacture for the xxxx component of
yyy device.
This document is a requirement of validation master plan XXXXX.
4 Definitions
URS – User Requirement Specification
Document No. XXXX/NNNN
Version: A Page 3 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
5 Responsibilities
It is the responsibility of the designated project engineer to ensure that this URS is completed prior the
manufacture of any mould tool.
It will be the responsible of the designated toolmaker to ensure that requirements stipulated below are
met prior to the delivery of XXX mould tool.
Checklist
3D model 2D drawings Material data Sheet Mold Flow
6 User Requirement Specification
Table One: Haag Streit UK User Requirement Specification
Parameter Requirements Responsible
Part Name
Tool Number
GA Drawings All GA drawings to be provided to Haag Streit UK and approved by Haag Streit UK before tooling manufacture
Toolmaker
Moulding Machine
Plastic material to be used for component
Material Data Sheet – See Appendix 1
HSUK
Master batch HSUK
Cycle time Toolmaker/HSUK
Component Dimensions Critically to Function Assessment
See assessment in Appendix 2 HSUK to provide information to toolmaker Prior tooling manufacture
Mould Flow Analysis Toolmaker
Tooling Imp Toolmaker
Runner System Toolmaker
Steel Safe Dimensions Toolmaker
Moulding Press Drawings and Electrical circuit schematic
See Appendix 3 HSUK
Core/Cavity Finish Toolmaker
Tool steel to be used Toolmaker
Electrical connectors Harting plug Toolmaker
De-moulding strategy
Air-line connectors Toolmaker
Document No. XXXX/NNNN
Version: A Page 4 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
Hydraulic hose connectors Toolmaker
Backing plate Toolmaker
Sliders Self-Lubricating sliders Toolmaker
Ball catches and stops
Bolts Toolmaker
O-rings Toolmaker
Ejector pins DLC coated Toolmaker
Spares Toolmaker
Ejector coupling Toolmaker
Bolster Steel Hasco,
Cycle counter Toolmaker
Proximity switches Toolmaker
Waterway connectors N9 300 series in-out to be engraved, no looping of waterways
Toolmaker
Tool Identification XXX- on all bolster plates Toolmaker
Weight Engraved on all plates Toolmaker
Health and Safety The mould design must comply with all health and safety instruction with hard copies included in the mould manual supplied with the mould tool. Mould handling and lifting safety instructions to be provided
Toolmaker
Lifting Straps All lifting straps must be capable of meeting weight requirements, with weight stamped on the mould tool and lifting strap
Toolmaker
Tool Warranty X cycles/2years Toolmaker
Additional Information Written instructions to be provided for any special non-standard requirements
Toolmaker
Document No. XXXX/NNNN
Version: A Page 5 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
7 Appendix One – Material Data Sheet
Document No. XXXX/NNNN
Version: A Page 6 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
8 Appendix Two – Platen Drawings
Battenfield
Document No. XXXX/NNNN
Version: A Page 7 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
Boy
Document No. XXXX/NNNN
Version: A Page 8 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
haitian Tech_MA1200 - MA1600
Document No. XXXX/NNNN
Version: A Page 9 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
haitian 1600
Document No. XXXX/NNNN
Version: A Page 10 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
haitian Tech_MA2000 - MA2500
Document No. XXXX/NNNN
Version: A Page 11 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
haitian2000-2
Document No. XXXX/NNNN
Version: A Page 12 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
haitian16002
Document No. XXXX/NNNN
Version: A Page 13 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
krauss Maffei
Document No. XXXX/NNNN
Version: A Page 14 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
Negri Bossi 60-2
Document No. XXXX/NNNN
Version: A Page 15 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
Negri Bossi 60
Document No. XXXX/NNNN
Version: A Page 16 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
Negri Bossi 130
Document No. XXXX/NNNN
Version: A Page 17 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
Negri Bossi 85
Document No. XXXX/NNNN
Version: A Page 18 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
Negri Bossi V160
Document No. XXXX/NNNN
Version: A Page 19 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
Sandretto 7
Document No. XXXX/NNNN
Version: A Page 20 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed
Sandretto 40
Sandretto 60
Document No. XXXX/NNNN
Version: A Page 21 of 21
Title;
P3026F(2) User Requirement Specification, issue 1, 31 Oct 2017 – Uncontrolled if Printed