;research on soft start up of vsc hvdc2

7/28/2019 ;Research on Soft Start Up of Vsc Hvdc2

1/153

The International Conference on Electrical and

Control Engineeringin conjunction with

The International Conference on Mechanic

Automation and Control Engineering

Conference Program Guide

http://www.icecemeeting.org June 26-28, 2010 Wuhan, China


2/153

Conference Program Guide

TABLE OF CONTENTS

PART II VIPS COLLECTION................................................................................................................................3

PART III INVITED PLENARY SPEECHES........................................................................................... ......... ......9

PLENARY SPEECH 1: TRENDSAND DEVELOPMENTSIN CONTROL SYSTEMSFORENGINES...............................9

PLENARY SPEECH 2: NETWORKED CONTROL SYSTEMSIN ROBOTICSAND NANOSCALE APPLICATIONS..........9

PLENARY SPEECH 3: MODELLINGAND QUALITY CONTROLFORSATELLITE NAVIGATION: PROGRESSAND

CHALLENGING ISSUES.....................................................................................................................................11

PLENARY SPEECH 4: ABOUTTHEEXTRACTIONOFRELEVANTHEALTHINFORMATIONOFEQUIPMENTSFOR

OPTIMIZINGTHEIRPERFORMANCES.................................................................................................................12

PLENARY SPEECH 5: HYBRIDSYSTEMCONTROL.............................................................................................12

PLENARY SPEECH 6: SEVERAL RESEARCH ISSUESIN MOBILE AD HOC NETWORKS.......................................14

ORAL_1: AUTOMATION CONTROL ..................................................................................................................15

ORAL_2: COMPUTERENGINEERING................................................................................................................16

ORAL_3: ELECTRICAL ENGINEERING..............................................................................................................16

ORAL_4: ELECTRONIC TECHNOLOGYAND INFORMATION..............................................................................18

ORAL_5: THE CHINESE SYMPOSIUMON ELECTRICALAND CONTROL ENGINEERING.....................................18

ORAL_6: CAD/CAM/CIM AND SIMULATION.................................................................................................19

ORAL_7: INSTRUMENTSAND VIBRATION CONTROL.......................................................................................21

ORAL_8: MANUFACTURING CONTROLAND AUTOMATION ENGINEERING.......................................................21

ORAL_9: MATERIALS PROCESSINGAND CONTROL.........................................................................................22

ORAL_10: NEW ENERGY TECHNIQUESAND APPLICATION..............................................................................23

ORAL_11: THE CHINESE SYMPOSIUMON ENVIRONMENT, CONSTRUCTIONAND TRANSPORTATION...............23

ORAL_12: THE CHINESE SYMPOSIUMON MECHANIC AUTOMATIONAND CONTROL ENGINEERING...............25

PART V POSTER SESSIONS..................................................................................................................................26

POSTER1: AUTOMATION CONTROL.................................................................................................................26

POSTER2: COMPUTERENGINEERING..............................................................................................................54

POSTER3: ELECTRICAL ENGINEERING............................................................................................................56

POSTER4: ELECTRONIC TECHNOLOGYAND INFORMATION............................................................................71

POSTER5: THE CHINESE SYMPOSIUMON ELECTRICALAND CONTROL ENGINEERING...................................74

POSTER6: CAD/CAM/CIM AND SIMULATION...............................................................................................84POSTER7: INSTRUMENTSAND VIBRATION CONTROL.....................................................................................91

POSTER8: MANUFACTURING CONTROLAND AUTOMATION ENGINEERING.....................................................96

POSTER9: MATERIALS PROCESSINGAND CONTROL.....................................................................................104

POSTER10: NEW ENERGY TECHNIQUESAND APPLICATION..........................................................................106

POSTER11: THE CHINESE SYMPOSIUMON ELECTRICALAND CONTROL ENGINEERING...............................109

POSTER12: THE CHINESE SYMPOSIUMON MECHANIC AUTOMATIONAND CONTROL ENGINEERING...........136

PART VI INSTRUCTIONS FOR PRESENTATIONS..........................................................................................148

PART VII HOTEL INFORMATION....................................................................................................................149


3/153

Part I Conference Schedule

June 26 ~ June 28, 2010

8:00-18:00 Registration Location: Ramada Plaza Optics Valley Hotel ,Wuhan

Note: You can register at any time during the conference

Sunday Morning, June 27

Time Activity Location: 5th floor, EastLake Ballroom in Ramada Plaza Optics Valley Hotel ,Wuhan

09:00-09:30 Opening Ceremony

09:30-10:15 Plenary Speech 1:Trends and Developments in Control Systems for Engines,Prof. Richard Stobart

10:15-10:30 Coffee Break

10:30-11:15 Plenary Speech 2: Networked Control Systems in Robotics and Nanoscale pplications,Dr. Yi Guo11:15-11:50 Plenary Speech 3:Modelling and Quality Control for Satellite Navigation: Progress and Challenging Issues,

Prof. Jinling Wang

Sunday Noon, June 27

12:00-13:30 Lunch Location: Plaza Caf (4th floor) and Revolving Restaurant (28th Floor), Ramada Plaza

Optics Valley Hotel ,Wuhan

Sunday Afternoon, June 27

Time Activity Location: 5th floor, EastLake Ballroom in Ramada Plaza Optics Valley Hotel ,Wuhan

14:30-15:15 Plenary Speech 4:About the extraction of relevant health information of equipments for optimizing theirperformancesProf. JKondo Hloindo Adjallah

15:15-16:00 Plenary Speech5: Hybrid system control, Prof. Jiamei Deng

16:00-16:15 Coffee Break

16:15-17:00 Plenary Speech 6:Several Research Issues in Mobile Ad Hoc Networks,Dr. Xiaolong Li

Sunday Evening, June 27

18:30-20:30 Welcome Banquet Location: 5th floor, EastLake Ballroom in Ramada Plaza Optics Valley Hotel ,Wuhan

Monday Morning, June 28

Time Activity Location (Ramada PlazaOptics Valley Hotel,

Wuhan)

08:30 - 10:00

Coffee Break

10:20 11:45

Oral_1: Automation Control No.1Room,EastLakeBallroom, 5th Floor

Oral_2:Computer Engineering WestLake Ballroom, 5thFloor

Oral_3: Electrical Engineering No.1 Room,South LakeBallroom ,5th Floor

Oral_4: Electronic Technology and Information VIP Reception Room

Oral_5: The Chinese Symposium on Electrical and Control Engineering No.2 Room, South Lake

Ballroom ,5

th

FloorOral_6:CAD/CAM/CIM and Simulation No.3 Room, South Lake

Ballroom, 5th Floor

1


4/153

08:30 - 10:00

Coffee Break

10:20 11:45

Poster_1: Automation Control No.2Room,EastLakeBallroom, 5th Floor

Poster_2: Computer Engineering

Poster_3: Electrical Engineering

Poster_4: Electronic Technology and Information

Poster_5: The Chinese Symposium on Electrical and Control Engineering

Poster_6: CAD/CAM/CIM and Simulation

Monday Noon, June 28

12:00-13:30 Lunch Location:Plaza Caf (4th floor) and Revolving Restaurant (28th Floor),

Ramada Plaza Optics Valley Hotel ,Wuhan

Monday Afternoon, June 28

Time Activity Location (Ramada Plaza

Optics Valley Hotel,Wuhan)

14:30 - 15:45

Coffee Break

16:00 17:15

Oral_7:Instruments and Vibration Control No.1 Room,South LakeBallroom ,5th Floor

Oral_8:Manufacturing Control and Automation Engineering No.2 Room, South LakeBallroom, 5th Floor

Oral_9: Materials Processing and Control WestLake Ballroom, 5thFloor

Oral_10: New Energy Techniques and Application VIP Reception Room

Oral_11: The Chinese Symposium on Environment, Construction andTransportation

No.1Room,EastLakeBallroom, 5th Floor

Oral_12:The Chinese Symposium on Mechanic Automation and ControlEngineering No.3 Room, South LakeBallroom, 5th Floor

14:30 - 15:45

Coffee Break

16:00 17:15

Poster_7: Instruments and Vibration Control No.2Room,EastLakeBallroom, 5th Floor

Poster_8: Manufacturing Control and Automation Engineering

Poster_9: Materials Processing and Control

Poster_10: New Energy Techniques and Application

Poster_11: The Chinese Symposium on Environment, Construction andTransportation

Poster_12: The Chinese Symposium on Mechanic Automation and ControlEngineering

2


5/153

Part II VIPs Collection

Prof. Richard Stobart

Richard Stobart is Head of Aeronautical and Automotive Engineering at Loughborough

University and Professor of Automotive Engineering. He is also Director of the Innovation &

Research Centre at Loughborough, funded by Caterpillar, the manufacturer of engines and

machinery. Professor Stobarts research interests include engine systems, engine control,

diagnosis techniques, control methods for hybrid and electric vehicles, and the control of fuel

cell systems.

Professor Stobart is a graduate of the University of Cambridge and received his research trainingin advanced engine technologies. He is a Fellow of the Institution of Mechanical Engineers and

is a member of the Society of Automotive Engineers, Engineering Meetings Board.

3


6/153

Dr. Yi Guo

Dr. Yi Guo is currently an Assistant Professor in Department of Electrical and Computer

Engineering at Stevens Institute of Technology. She obtained her Ph.D. degree in Electrical and

Information Engineering from University of Sydney, Australia, in 1999. She was a postdoctoral

research fellow at Oak Ridge National Laboratory from 2000 to 2002, and a visiting Assistant

Professor at University of Central Florida from 2002 to 2005. Her research interests are mainly

in nonlinear systems and control, autonomous mobile robotics, and control of multi-scale

complex systems. She has authored and co-authored over fifty papers in archived journals,

conference proceedings, and as book chapters. She has served as Program and Organizing

Committee member of a number of international conferences, including IEEE International

Conference on Robotics and Automation (2006, 2008), IEEE International Conference on

Intelligence Robots and Systems (2009, 2010), IEEE International Conference on Robotics and

Biomimetics (2009). Dr. Guo is a Senior Member of IEEE. She was the Meeting Finance Chair

of IEEE Society of Robotics and Automation from 2004 to 2009. She currently serves on IEEE-USA Critical Infrastructure Protection Committee.

Prof. Jinling Wang

4


7/153

Dr Jinling Wang is an Associate Professor in the School of Surveying & Spatial Information

Systems, University of New South Wales (UNSW). His major research interest is in the areas of

geo-positioning, mapping and navigation using multi-sensors. He is a Fellow of the Royal

Institute of Navigation, UK, and a Fellow of the International Association of Geodesy (IAG). DrWang is a member of the Editorial Board for the international journal GPS Solutions, and was

Chairman of the study group (2003-2007) on pseudolite applications in positioning and

navigation within the IAGs Commission 4. He was elected 2004 President of the International

Association of Chinese Professionals in Global Positioning Systems (CPGPS), and the Founding

Editor-in-Chief for the Journal of Global Positioning Systems (2002-2007), Conference

Convener of the 2004 International Symposium on GPS/GNSS in Sydney, Australia; Technical

Chair for the world's premier GPS/GNSS conference (ION GNSS2008) in the USA. He holds a

PhD in GPS/Geodesy from the Curtin University of Technology, Perth, Australia. He has

published over 200 papers in journals and conference proceedings as well as two commercial

software packages. Visit website: www.gmat.unsw.edu.au/wang, to find more details about the

research activities within his research group at UNSW.

5
http://www.gmat.unsw.edu.au/wanghttp://www.gmat.unsw.edu.au/wanghttp://www.gmat.unsw.edu.au/wang


8/153

Prof. J Kondo Hloindo Adjallah

IEEE Member, NSF I/UCRC IMS Fellow

Prof. Adjallah is currently with the Ecole Nationale d'Ingnieurs

de Metz (a University of Technology) and head of the electrical engineering department, since

September 2008. He was Associate Professor at the Universit de Technologie de Troyes (UTT),

France, from 1994 to 2008. In 2003, he became Research Director, a national award received

from the Universit de Technologie de Compigne, which raised him to the rank of senior

researcher. From 2005 to 2006, he has been visiting Professor at the University of Cincinnati,

Department of Mechanical, Industrial and Nuclear Engineering, NSF Industry/University

Cooperative Research Center on Intelligent Maintenance Systems. He serves in the French

National Association of Maintenance Engineers, member of the French Academic Working

Group on Modeling and Optimisation of the Distributed & Collaborative Maintenance

affiliated to CNRS, and also in the European Safety and Reliability Data Association (ESReDA).

He is also member of the IEEE society since 2002 and leader of the international cooperative

research network for the management of durable infrastructures of development (MID). Heorganized the International Conference on Intelligent Maintenance Systems, July 15-16, 2004,

Arles, France, and special sessions on manufacturing systems monitoring and maintenance for

the International Conferences INCOM2006 of IFAC and SSSM06 of IEEE. He is author of

several papers and served as guest editor for international scientific journals.

His research interests include methods for components reliability analysis, health monitoring,

data collection and analysis, predictive maintenance decision support, and networked distributed

systems management. After years of research with the research group of Industrial Systems

Optimization at the UTT and the French CNRS affiliate Institute Charles Delaunay, he leads

currently the maintenance and reliability research team of the Laboratory of Industrial

Engineering and Production of Metz (LGIPM).

6


9/153

Prof. Jiamei DengDr. Jiamei Deng received the Ph.D. degree in cybernetics from University of Reading in 2005.

She Currently works as a research Associate in Loughborough University. She was a research

fellow in the University of Sussex between 2006 and 2007. Before her PhD study in Reading,

she was an associate professor in Shanghai University. Her research interests include predictivecontrol, nonlinear control, sliding mode control, optimal control, system identification,

optimization, process control, power control, black-box modeling, automotive control and energy

systems. Dr. Deng has published forty refereed papers in both Journal and conferences.

7


10/153

Dr. Xiaolong Li

Dr. Xiaolong Li received his Bachelor of Engineering and Master of Engineering degrees in

Electrical and Information Engineering from Huazhong University of Science and Technology in

1999 and 2002, respectively. He received his PhD degree from The University of Cincinnati in

2006. In 2006, he joined the faculty in the Department of Industrial and Engineering at

Morehead State University, USA. In 2008 he moved to Indiana State University where he is an

Assistant Professor in the Department of Electronics, Computer and Mechanical Engineering

Technology. His current research interests include design and analysis of wireless and mobile

system, performance modeling, ad hoc networks, QoS issues and Microcontroller-based

applications. Dr. Li published more than 25 papers on International conference proceedings and

International Journals.

8


11/153

Part III Invited Plenary Speeches

Plenary Speech 1: Trends and Developments in Control Systems for Engines

Speaker: Prof. Richard Stobart

Loughborough University, Leicester,UK

Time: 09:30-10:15, June 27, 2010

Location:5 th floor, EastLake Ballroom in Ramada Plaza Optics Valley Hotel ,Wuhan

Abstract:Throughout the history of engine development there has been a need for engine control systems

to regulate the engines speed and load. Until the advent of electronic systems, those functions

were provided by mechanical devices. With the need for a reduction in exhaust emissions and the

growing interest in fuel economy, electronic systems brought both precision and flexibility.

Electronic controls also brought the opportunity to apply the kind of control technique that had

been previously applied in aerospace applications. The internal combustion engine posed unique

challenges that required an adaptation of existing techniques. This keynote lecture will review

the progress of engine control and highlight the current challenges and how those challenges

being addressed through an exciting research agenda.

Plenary Speech 2: Networked Control Systems in Robotics and Nanoscale

Applications

9


12/153

Speaker: Dr. Yi Guo

Department of Electrical and Computer Engineering, Stevens Institute of Technology, New Jersey, USA

Time: 10:30-11:15, June 27, 2010

Location:5th floor, EastLake Ballroom in Ramada Plaza Optics Valley Hotel ,Wuhan

Abstract:Collective behaviors have long been observed in naturally occurring systems, e.g., flocks of

birds, arrays of nano-particles, and clusters of biological organisms. With the remarkable

advances in networking technologies, a wide range of man-made systems have displayed

cooperative behaviors, e.g., large power systems, transportation networks, and distributed sensor

components communicating across high-speed data networks. This talk presents recent research

advances in nonlinear control of multi-agent networked systems. In particular, cooperative

control of distributed robotic systems and friction control of nano-scale particles will be

addressed.

In the first part of the talk, the problem of controlling a group of mobile agents to form a

designated formation while flocking is considered. A potential field based method is used to

drive the agents moving in connection with their neighbors, and flocking with environmental

constraints. Stability properties are studied to guarantee that all agents eventually form the

desired formation while flocking, and flock safely without collision with the environment

boundary.

The second part of the talk deals with friction control at the nanoscale, where a one-dimensional

model of interconnected particles is established to imitate the atomic force microscopy (AFM)

tip moving on a substrate. Stability analysis of the interconnected particle array is conductedusing Lyapunov stability theory. A feedback vibration control is then designed to reduce the

friction force of the sliding AFM system. Comparing to the traditional way of controlling friction

by chemical means, our proposed control provides a paradigm-shift mechanism to tune frictional

dynamics mechanically by adding vibrations to accessible system element.

10


13/153

Plenary Speech 3: Modelling and Quality Control for Satellite Navigation:Progress and Challenging Issues

Speaker: Prof. Jinling Wang

School of Surveying and Spatial Information Systems,University of New South Wales Sydney , Australia

Time: 11:15-11:50,June 27, 2010Location: 5th floor, EastLake Ballroom in Ramada Plaza Optics Valley Hotel ,Wuhan

Abstract:

A Global Navigation Satellite System (GNSS) includes a space-borne satellite constellation,

ground control stations and user receivers. As more and more human activities are relying on

the use of satellite navigation technology, the reliability and availability of the satellite

navigation solutions has become a major issue. This issue can be addressed through robust

integration between various GNSS satellite navigation systems (such as, American GPS,

European Galileo, Ruassin Glonass, Chinese Compass) and between GNSS and other

complementary navigation sensors, such as, Pseudo-Satellites (Pseudolites or PL): a ground-

based radio ranging signal transmitter and Inertial Navigation System (INS): a self-contained

and autonomous sensor based on accelerometers and gyroscopes for position and attitude

determination.

At the very heart of positioning and navigation data processing is the use of the modern optimal

estimation theory to process the measurements for reliable positioning results. Before any

optimal estimation procedure can be applied, both the functional and stochastic models of the

sensor measurements need to be defined. Therefore, major efforts should be made to seek

fundamental understanding of the statistical and geometric characteristics inherent within themeasurements from various navigation sensors. Such knowledge is then used to design robust

modelling and quality control procedures formulti-sensor navigation systems, towards reliable

and seamless navigation solutions for various applications.

This keynote presentation reviews recent progress, and discuses the challenging issues, in

developing modelling and quality control procedures for use in positioning and navigation with

modern GNSS constellations and the integration of GNSS with other sensors.

11


14/153

Plenary Speech 4: About the extraction of relevant health information ofequipments for optimizing their performances

Speaker: Prof. J Kondo Hloindo Adjallah

Ecole Nationale d'Ingnieurs de Metz,, France

Time: 14:30-15:15, June27, 2010Location: 5th floor, EastLake Ballroom in Ramada Plaza Optics Valley Hotel ,Wuhan

Abstract:

The development of the nanotechnologies, the biotechnology and the technologies of

communication and information, pushed back the limits of information of the product, which

forces to reformulate the problem of extraction of information on health condition of the product

over the life cycle. Thus, the performance of a product should not be limited any more only to

the evaluation of macroscopic measurements, as the state of the components can be now

evaluated starting from intrinsic data at the level nanometric. It will thus be possible to

characterize a component in the product by information of DNA type (Deoxyribonucleic Acid)

that will enable following, for example, the degradations of involved materials. This prospect can

help reinforcing the quality of the collected data to feed the information extraction models.

Decision support requires data and information of high quantity in all level in the product

decomposition. This need led today the human society to becoming increasingly voracious to

information on products or systems lifecycle. Data quality has forced improving the reliability of

the data collection systems for product life cycle management. Unfortunately, there does not

exist yet of well-established models of data collection process enabling strengthening their

effectiveness. On the other hand, the advances in information technologies and the increasing

power of computer systems enable to consider products and production systems with valueadded support services. Thus, it is a challenge today to design quite intelligent and self-healing

products, by using the nanotechnologies and intelligent embedded information devices. In this

presentation, we will describe the products health condition information extraction approach, for

decision support in maintenance and in risk assessment. A modeling approach of data and

information collection processes, based on the product identification technologies and the

nanotechnologies, will be presented with the associated data processing tools. It will also point

out the emerging scientific problems, of which solutions will enable to make efficient, the

information systems supporting the product lifecycle and health condition monitoring.

Plenary Speech 5: Hybrid system control

12


15/153

Speaker: Prof. Jiamei Deng

Loughborough University, Leicester,UK

Time: 15:15-16:00, June 27, 2010

Location: 5th floor, EastLake Ballroom in Ramada Plaza Optics Valley Hotel ,Wuhan

Abstract:Hybrid systems are composed of continuous systems and discrete systems. Hybrid system

control is in its infancy as a branch of systems engineering. The newly emerging energy

requirement has made the hybrid control become a hot topic. One example is that a renewable

energy scheme uses a combination of methods to maintain a reliable supply. Each mode (wind,

wave, tidal and solar) may be used at maximum efficiency, but from time to time, one or more

modes may not be accessible due to extreme conditions or to a breakdown. The choice of modes

will vary according to the prevailing weather conditions, how much energy is stored and the

demand for power.

Another example is the hybrid vehicle in which an engine [probably working with an alternative

fuel] powers a generator with some of its output combined with the output of an electric motor.

The motor uses electricity previously stored in a battery or possibly a super-capacitor where

braking energy has been stored from the last braking event. The engine is complicated by the

need to switch modes (from compression to spark ignition for example) to stay efficient.

Hybrid control is concerned with the proper management of systems that will switch between

modes. Within those modes a control process is needed. Between modes a smooth and efficient

transition is needed.

This speech will address the key issues related hybrid systems, such as, modelling, supervisory

control, optimal control, robust control, and stability problems.

13


16/153

Plenary Speech 6: Several Research Issues in Mobile Ad Hoc Networks

Speaker: Dr. Xiaolong Li

Morehead state universityKentuckyUSA

Time: 16:15-17:00, June 27, 2010

Location: 5th floor, EastLake Ballroom in Ramada Plaza Optics Valley Hotel ,Wuhan

Abstract:

Mobile ad hoc networks have now become one of the most vibrant and active fields of

communication and networking research. Given many intriguing future applications of mobile ad

hoc networks, there are still some critical challenges and open problems to be solved. Thus,

broadly this presentation will address several challenging issues and the future work of mobile ad

hoc networks.

14


17/153

Part IV Oral SessionsMonday Morning, June 28

Oral_1: Automation Control

No.1 Room, EastLake Ballroom, 5th Floor Time: 08:30-11:45June 28

Paper ID Paper Title Author

A333157

2

Implementation and Performance Evaluation of an Intelligent Online Argumentation Assess

ment System

Chenn-JungHuang

A132112 Research on Digital Image Correlation Method Applied in Shear Test of New Style Automotive

Structural Adhesive

BinLi

A422516 Robust Method for Solving Rational Function Model ChenLibo

A206161

7

EXTENDED ONLINE HECOL BASED MULTI-CAMERA OBJECT TRACKING FanJingjing

A081170

1

Study on Passive and Active Control of Vibration Isolation System with Flexible Foundation FengDezhen

A501506 Simulation Studies on Timing-oriented Performance of a New Feeding System GeYang

A224234

2

A Multiple Hypothesis Tracking Method for Extended Target Tracking GuanZhai

A021983 A Modification to the Current Algorithm of the Correlation Method for Cross Power Spectrum

Estimation

GuoyanWang

A108922 Development and Application of Mobile Water Level Monitoring Based on Multi-sensor

Integration

HongmeiZhang

A255183

3

Multitarget Tracking Before Detection via Probability Hypothesis Density Filter HuisiTong

A833298 The Study of Minimum Time Algorithm in Intensive Goods Storage Planning JiyuanZang

A364134

9

Compensation Method of Cross-axis Effect for AMR Sensor JunOuyang

A518229

0

SAR Imaging of Moving Targets via Compressive Sensing JunWang

A386116

7

Underwater Navigation Based on Topographic Contour Image Matching KaiZhang

A771163

9

Virtual Simulation Evaluation of the Human-Computer Interface of a Display and ControlDevice

ShangZhen

A05394

6Software Development on the Establishment of Local Marine Geomagnetic Filed Model ShengpingWang

A00721

85A new sensor-follow control strategy for tracking control mobile robot ShiJingkui

A55021

75A New Disaster Monitor and Forecast System based on RBF Neural Networks Xiulan Wang

A43855

1Software Design for Real-Time Measuring and Control System Based on LabView and 1553B XudanXU

A78318

83Application of Acoustic Emission in the Study of Concrete yanglihui

A85090

4Fast Filter Back Projection Algorithm Based on Hexagonal Grid YiduoWang

A51698

2A Unified Standard Traffic Light Display Yih-JiunShen

15


18/153

A56018

63High Precision Detection for Power System Parameters Based on Wavelet Transform under

Asynchronous Sampling

Zhan-fengYing

A55611

14ynchronization Control of Axial Feed and Internal Pressure in Hydroforming zhang Yong

A80778

9

Research and Implementation of the Security Method based on WIA-PA Standard MinWei

Oral_2: Computer Engineering

WestLake Ballroom, 5th Floor Time: 08:30-11:45June 28


A355934 Analysis of Designing Software Defined Radio DuanLian

A1881936 Continuous k-Nearest Neighbor Queries on Multi-core CPUs HE Hui Ying

A6802024 E-commerce Recommendation Method Based on Genetic Algorithm and Composite Weight

Matrix

HeDian

A0111534 Numerical Simulation of the Local Collection Efficiency huaguo

A2631992 Integration of Video Surveillance and Skyline Terrain Image huangbinghu

A537577 Boundary Rail Method of Mesh Generation Hubifu

A2621519 Fault Identification in the BGP System Based on Clustering Algorithm JunLv

A0732413 Numerical Simulation of Mold Filling in Injection Molding with Incompressible Leonov Fluid

Model

KuangTang-Qing

A4512019 The application of RBAC model in E-commerce system LiHongxin

A031168 Numerical Simulating for the Cyclone Separator Equipping with Acoustic Agglomeration of

Inhalable Particulates

pingzhang

A3621917 An Ability Demand-Oriented Curriculum Design for IM & IS Degree Program QianfanZhang

A3741677 Comparison of Intensity Theoretical Calculation with Finite Element Calculation for the

Below Node of Storage Tank Wall

Si-zhuZhou

A5101350 Reliability Analysis of Shield Cutter Based on Stochastic Finite Element Method WangKai

A071527 Study on CAD Dynamic Simulation on the Control of Airship at Windless Condition Based on

The Propeller of Fin

yanchuyang

A682578 Finite Element Model of Aero Turbine Blades Investment Casting Process Based on

Hypermesh

YangqingDOU

A068313 SPICE Model for IGBT Temperature Effects Compared with Measurements YuanShoucai

A843871 On Application of Algorithm Visualization in Teaching Software of Algorithm YuWei

A842202 Design of Distributed Monitoring and Diagnosis System for Locomotive Diesel ZhijunChen

Oral_3: Electrical Engineering

No.1 Room, South Lake Ballroom ,5th Floor Time: 08:30-11:45June 28

PaperID Paper Title Author

A31786

2

Analysis of Bifurcation Phenomena based on Optimized Transformer in Loosely Coupled Inductive

Power Transfer System

fengaming

A31798Uplink OFDMA Channel Estimation with Frequency Domain Compensation in Sparse channel GuanpingLu

16


19/153

0

A66114

50

Combining strategy of genetic algorithm and particle swarm algorithm for reactive power

optimization

JinguiLu

A11623

99

Research on the Matched DC Filter Design in the Power Accumulator Battery Testing System kangwei

A68010

27

Comparative Study of Magnetic Fields Due to Types of Planar Permanent Magnet Array LiHuang

A57191

6

Study of Wireless Power Transfer System Through Strongly Coupled Resonances LinlinTan

A23410

58

The analysis of magnetic and thermal characteristics for the Three Gorges 840MVA evaporative

cooling hydrogenerator on the basis of Ansys software

LinRuan

A71411

50

Flow around Rudder Controlled by Electromagnetic Body Force LiuHui-xing

A88352

0

NoC Design for the SoC of Image Process System of Road Mark Recognition LiuJia

A32111

79

Flow structure and propulsion effects of MHD propulsion by surfaces liuzong kai

A18752

0

NoC Design with DFG Model for DSPS LiZheying

A65818

99

A novel high PSR voltage reference with secondary temperature compensation NingZhi-Hua

A10658

3

Optimal compensation algorithms for a Dynamic Voltage Restorer PanDeng

A21469

4

A Novel Drive Strategy for PMSM Compressor QiangGao

A74314

50

Hybrid Optimization Strategy for Line Distribution Network QingjingZhou

A08310

51

Methodology of regenerator calculation for use in subcritical and transcritical organic Rankine

cycle for low-temperature heat recovery

TaoGuo

A80762

7

A New Operational Tests Circuit for 660kV UHVDC Thyristor Valves TingXie

A23710

43

Study on Bipole Protection of 800KV UHVDC System Xiao-kangXu

A70313

63

A Ultra Low Supply Voltage Bandgap Reference Based On Substrate Bias yangpeng

A60623

06

Investigation for 600 MW Supercritical Boilers Main Steam Temperature Control Yu Yanzhi

A81723

98

Three-level PWM Inverter based on the Battery Discharge System Zhang Lixia

A71824

38

Determination of the Admissible Parameter Set in Designing PID Controllers with Guaranteed

Robust Performance

Zhen-pingZENG

A75452

0

Error Analysis of Integrated Resistor Attenuation Network ZheyingLi

A15890

2

Characteristics and Design of Transformer in Loosely Coupled Inductive Power Transfer System ZhixinMao

17


20/153

A52122

05

Study on the Non-Power Frequency Transient Fault Selection in Distribution Network with a

Single-phase to Ground Fault Based on Hilbert-huang Transform

Zhong-jianKang

A08775

1

Current Research situation and Developing Tendency about Wireless Power Transmission zouyuwei

A31013

23

Voltage and current analysis of multi-step STATCOM based on three-level inverters YingXiao

Oral_4: Electronic Technology and Information

VIP Reception Room Time: 08:30-11:45June 28


A0031847 Target Recognition based on the Self-correlation Function of HRRP ChenNan

A5201390 Fabrication of an aspherical microlens for OLED with modified etching process LiuK.H.

A8331531 Design of a Real-Time Bus Monitor and Debugger for Embedded Systems DanghuiWang

A7101002 Research on the design of online intellgent tutoring agents DaShi

A4401175 The development of hydrographic Datum Transformation Software HaoKe

A655371 Multiple Symbol Detection for Differential Unitary Space-Time Modulation Using a M-BID

Algorithm

JinXiao-ping

A2062138 Research and Development of Law Enforcement System for Urban Management Based on

Mobile Phone Platform

NingDing

A3701884 Implementation of 1024-Point FFT Algorithm panglihui

A8731926 The Design and Development of Shop-level Information Integration System ShuwangKe

A8622260 SWSCPD: Architecture for Complex Product Design Based on Semantic Web Services SongXiao

A2171938 The FPGA Implementation of Modified Goertzel Algorithm for DTMF Signal Detection xinyizhang

A7351253 Information-Driven Search for Multiple Moving Targets XuYifan

A677297 A new wavelet modulus maximum method for noise reduction of chaotic signals YangGuo-shi

A3361059 Calculation of Geometric Dilution of Precision using Adaptive Filtering Technique based on

Evolutionary Algorithms

Mohammad

RezaMosavi

Oral_5: The Chinese Symposium on Electrical and Control Engineering

No.2 Room, South Lake Ballroom ,5th Floor Tme: 08:30-11:45June 28


A47749

6

Generalized Projective Synchronization for Multi-Wing Chaotic Attractors BochengBao

A53363

3

Applications of Genetic Neural Network to Deformation Prediction of Face Rockfill Dam Changbinwu

A40223

49

Research on Liver B Ultrasonic Images Classification Based on SVM DanhongZhang

A44717

20

Survey on supply chain modeling based Complex Networks GangLi

A56648

7

Parametric study and optimization of 2D woven C/C-SiC composite HaibinWang

18


21/153

A18413

87

Integration of multi-feature for moving target detection algorithm JinYu

A87321

67

Risk Management with Risk Chain in Electric Power Company KeLiu

A02831

5

A Design of Surface EMG Signal Detector Based on DSP Li Zhao

A72146

5

The Design of Multi-Channel ARINC429 Communication Board Based on CPLD LiLeyao

A82411

95

Topology Optimization of the Loader Hood Structure Based on SIMP Theory MingHan

A05450

8

Variation Relationship Among Multi-station Flood Series in Middle Reach of Xijiang River Basin PingXie

A54850

8

Variation Relationship Among Multi-Time-Scale Runoff Series in East River Basin PingXie

A72512

06

Bus Structural Optimization Based on Sensitivity Theory RunhaoZheng

A28848

9

Research on Radar Aided SINS Autonomous Navigation Scheme for Lunar Soft Landing ShuaiChen

A14415

27

Hydraulic micro-feed actuator for precision machining on conventional CNC turning centers Shu-linWang

A77563

8

Study on Chip Formation in High Speed Turning of Inconel 718 SongXinyu

A57615

02

Kinematics Analysis and Gait Research of the Piling Platforms Walking Mechanism in Dyke

Emergency

Wang Cunlei

A62450

8

Implementation Order of Technologic Schemes for Anti-Electricity-Larceny Upgrading Project Xiao-hongZhu

A07311

95

Mechanical Model and Finite Element Analysis of the Loader Drive Axle Housing In Typical

Operating Conditions

Yan-qunHuang

A84113

88

Desigen of Management System for LiFePO4 Power Batteries Group YinquanHu

A23784

5

Study on the combustion and thermoelectric conversion characteristics of micro-combustors YongshengZhang

A21129

5

A new approach for the detecting and tracing of Hopf bifurcation point zhaoxingMa

A21511

27

Research and analyzation on the two-symmetric-point vibration source piezoelectric feeding

device

ZhuWeimin

Oral_6: CAD/CAM/CIM and Simulation

No.3 Room, South Lake Ballroom, 5th Floor Time: 08:30-11:45June 28


E22139

7

An improved thermal simulation model for the spindle of CNC machine tool SunMing-Lu

E55192

3

Improved numerical constraint disposal method for process conditions in sheet metal forming

simulation

TingDU

19


22/153

E31691

7

Numerical method for simulating skin stretch forming xieshaohui

E65188

7

Modeling the Reduction Behavior of Iron Ore fines in a Circulating Fluidized Bed Reactor YuanLi

E06226

9

Study on Vibration Control of Vibration Isolation System with Flexible Foundation FengDezhen

E01627

6

Modeling and Simulation of the Proportional Valve Control System for the Turbocharger Sheng guanQu

E35112

32

Receding Horizon Control of LPGBE Gas Mass Flow Based on Neural Network Guoxiang Lu

E36112

36

A research for high-efficiency machining of mold cavity based on the patch trajectory planning Yujun Cai

E78211

54

CAD Tool Development of End Mill Parameter Design based on DA Method shuangyuwei

E40371 Numerical Simulation of Sliding Wear Based on Archard Model XuejinSHEN

E18335

0

Numerical Simulation of Unsaturated Flow in Porous Media Under Normal and Reduced Gravity

Conditions

qingmingchang

E72717

2

Applying independence axiom and design structure matrix to product module division XianfuCheng

E17562

2

"Solving the Scheduling Problem of Steel-making and Continuous-casting Using Genetic

Algorithm"

HongbingWang

E60111

19

Virtual Prototype Modeling of a Cable-crane and its Simulation to Passing Ability XIA Dayong

E73011

73

Fault diagnosis using rough sets and BP networks WeihuaLi

E76012

05

A Study on the Design and Commercialization of Decoupled Vibratory Feeding System LiangHAN

E84110

17

Simulation and Improving of the Behavior of Automatic Vertical Tong for Steel Coils transferring ZhongjunYin

E55145

2

Optimum design of working device of wheel loader YangYu

E36075

4

Kinematical and Dynamical Simulation for the Aircraft Model at 6-DOF in WDPSS QinHuang

E46384

1

Simulation analysis of tyre model based on BP Neural Network MingYang

E87210

60

Resonant Fatigue Testing Machine Frequency Lock Based on Fuzzy Logic Technique Xingjian Ji

20


23/153

Monday Afternoon, June 28

Oral_7: Instruments and Vibration Control

No.1 Room, South Lake Ballroom, 5

th

Floor Time: 14:30-17:15

June 28

Oral_8: Manufacturing Control and Automation Engineering

No.2 Room, South Lake Ballroom, 5th

Floor Time: 14:30 - 17:15June 28


E131366 Study of improving accuracy of dry mortar batching based on fuzzy PID control BaoChun LU

E240320 Research on Engineering Change of Carbody Assembly Based on ECBOM HaijiangLiu

E553106

6

Research of Driver Fatigue Detection System Based on ADSP-BF548 JieTang

E000121

9

An Estimation Method of the Fluid Temperature for Commercial Aircraft Hydraulic Systems jingli

E786109

3

A Virtual SOA Model for Network Manfacturing Integration LeiRen

E476426 Development of Hydroelectric Servo-valve Based on Piezoelectric Elements LihuiZhu


E424107

6

Optimal Actuator Placement for Vibration Control of Two-link Piezoelectric FlexibleManipulator

Cao Qingsong

E301106

8

Fretting Fatigue Tester for Steel Wire and its Measuring System Dagang Wang

E267114

5

A New Hydrau-electro-mechanical Transmission System with Soft Start-up/ Stepless SpeedRegulation

fulinwang

E145476 The study of Performance Test Methods and Test System of the Electric Nail Gun gengyuangao

E081106 Modal Computing Method of Output Feedback Control Gain Matrix in Pole Assignment ofVibration System

guo fengyao

E542858 A New Ultrasonic Guided Wave Signal Processing Method for UNDE of Laminated CompositeMaterial

Hanhui Xu

E765120

3

Instantaneous Leakage Flow Rate Measurement of Compressed Air huangliang

E227266 On-line Defect Detection Algorithms for Surface Inspection of Hot Rolled Strips KeXu

E753578 On Obtaining Machine Tool Joints Stiffness by Integrated Modal Analysis LeiGuo

E082110 Some Results on the Study of the Kneed Gait Biped liu zhenze

E127113

2

A Quick Convertible Agitating System LiuYing

E186719 Dynamics of 3-DOF spatial parallel manipulator with flexible links ShanzengLiu

E657107

1

Experimental ESD method for Restoration of blurry image in Ultrasonic C-Scan TaoKong

E608838 The Cracked Rotor Simulation Based on Virtual Prototyping Technology TianHan

E886455 Case Study Of Aircraft fuselage Automatic Assembly Simulation WangMin

E47210

15

Design of Electromagnetic Acoustic Transducer for Wheel Flaw Detection yangzheng guang

E41762

1

Effect of asymmetric mesh stiffness on vibration Characteristics of spiral bevel gear

transmission system

YinongLi

E45651

5

Design and application for robotic polishing system ZhangDong

E25710

17

Research on Dynamic Characteristics of Elliptical Vibrating Screen ZhichaoTang

E22384

2

Study on the acoustic performance of perforated tube silencer ZhongxuKang

21


24/153

E878749 Methods research and errors analysis based on CCD in level measuring system LiuWeina

E472103

0

Maximally Permissive Deadlock Prevention Policy for FMS based on Siphons MingmingYan

E800853 AHRS Base on MEMS-IMU for Aircraft Model in Wire-driven Parallel Suspension System NieWen-shu

E432718 Method of Stability Prediction for Milling Processes including Process Damping QinghuaSong

E440655 Automatic fuzzy comprehensive approach toward the determination of processing methods for

the components based on manufacturing features

QiongLi

E02164 Study of Grey Predictive-fuzzy Control for MR Semi-active Suspension Shao-BoLu

E318119

1

A NPLS Modeling Method of Outer-inner Polynomial Model Based on Variable Selection TingdongYe

E016172 A method for applying information axiom to the hybrid multi-attribute alternative evaluation XianfuCheng

E703107

2

Centrifugal multi-wing type ventilator performance improvement and Numerical simulation Xiao-mingYu

E788110

5

Influences of Workpiece Stiffness on High Speed Milling Stabilty XiqingXu

E87667

9

Flow Stress and Constitutive Modeling of Hydrogenated Ti-6Al-4V Alloys YangShubbao

E08725 Hybrid Dynamic Modeling of a High Speed Ball-Screw Drive System YanLiu

E63211

67

With the electrical properties of a new turbocharger YanxuZhang

E11211

54

A Strategy to Automatically Planning Measuring Path with CMM Offline yueweibai

E55410

02

Study on Mechanical Properties Evaluation for Pneumatic Actuator and Electric Actuator

Based on Information Entropy

ZhangYeming

Oral_9: Materials Processing and Control

WestLake Ballroom, 5th Floor Time: 14:30-17:15June 28


E27772

6

The influence of Ultrasonic impact on Microstructure and Properties of Rail Steel BolinHe

E00831

7

Laser Surface Alloying of ZM5 Mg Alloy with Al Powder CHENChangjun

E38812

29

Real-Time 3D Imaging: A Closer Reality of Industry and Manufacturing Applications D Zhao

E37534 Performance of abrasive wear of Cr3C2-NiCr coatings sprayed by HVOF GangchangJi

E32012

27

Research of Data Mining Based on Apriori algorithm in Cutting Database Guofeng Wang

E57834 Characterization of microstructure and properties of nanostructured Fe-Al/WC intermetallic

composite coating deposited by cold spraying

HongtaoWang

E04549

7

Study on shaping curve of inside oblique step for cross wedge rolling elliptical shaft HuFaguo

E32040

5

Intelligent Control of Clamping Faults in Indirect Squeeze Casting JianxinDeng

22


25/153

E26388 Analysis of process parameters influence on axial force of Cross wedge rolling PengWenfei

E15272

5

The Effect of Laser Consolidation and Nitriding Complex Surface Treatment on Microstructure

and Properties of 3Cr2W8V Steel

YingxiaYu

Oral_10: New Energy Techniques and Application

VIP Reception Room Time: 14:30-17:15June 28


G60778 Operational Analysis of Open Intake Technology in Untreated Sewage Source Heat Pump System jianfengqian

G31352 Experiments on Performance of PEM Fuel Cell with the Cathode up LihuaLuan

G82496 Synthetic fuels and chemicals production from biomass synthesis gas LingjunZhu

G26061 Analysis on Volatiles of Biomaterials by Cotton stalk MAQINGZHI

G72016 Thermal Performance Test of U-type Pipe Evacuated Glass Tubular Solar Collector Filled With

Graphite

Ruobingliang

G34711

0

Calculation of pitch point in the counter flow heat exchanger used in low-temperature waste heat

powered Organic Rankine cycle

WANGHui-tao

G44758 Numerical simulation of Vibration Performance for Nuclear Island Radioactive Boron Acid Water

Control Valve

Xiao-mingYu

G33010

9

Numerical investigation on thermal performance of vertical U buried pipe heat exchanger with

intermittent operation

YuanYanping

G41259 Investigation of Proton Exchange Membrane Microbial Fuel Cells Performance YulanTang

G41259 Investigation of Proton Exchange Membrane Microbial Fuel Cells Performance YulanTang

G82110

7Experimental Investigation On Bio-Mimic Transpiration Cooling For High-End Handhelddevices zhangxinsheng

G07447 Influence of Oxygen Concentration on Performance of PEM Fuel Cell ZheSun

Oral_11: The Chinese Symposium on Environment, Construction andTransportation

No.1 Room, EastLake Ballroom, 5th Floor Time: 14:30-17:15June 28


F84471 Biohydrogen production from molasses at continous hydrogen production system by

Biohydrogenbacterium R3 sp.nov.

CHENHong

F776593Simulation and Analysis of COD Distribution in Caofeidian Sea Area Cuiping Kuang

F587179Study on optimization of device operating parameters of hydrolysis acidification reactors treating

chemical industrial wastewater with high salinity

HaiLin

F628187Soil salinization and ecological remediation by planting trees in China Jianfeng ZHANG

F500372Broken wire detection in stay cables based on guided waves JiangXu

F216183Dynamic evaluation index of Urban Mass Transit JinhuaZou

F81321 Early Crack Mechanism and Ultimate Bearing Capacity of RC Hollow Slabs JuanHuang

F187630Estimation and influencing factors analysis of vegetation net primary productivity (NPP) in

Northeast China

lingluo

F042827Phosphorus Removal and Recovery from Domestic Wastewater in a Membrane Bioreactor with LiqiuZhang

23


26/153

External Recycle Anaerobic Process of Sludge

F276477The bi-level optimal model of ramp type selection of relative interchanges on consideration of

regional traffic affection

LiYou

F641556Adsorption of p-chlorophenol on cationic polymer/bentonite nanocomposite adsorption materials QianLi

F484131Field Test of Chlorine Decay in Drinking Water Distribution Systems shihushu

F430569Analysis on Intensive Land-use Development of Highway Construction SiyuanLiang

F482419Research and Application on the Road Tubular Pile Composite Foundation XiangrongZhu

F05733 Wetland mitigation and its ecological consequences for endangered waterbirds in the Liaohe

River Delta wetlands, China

Xiaowen Li

F56646

0

Mathematical Simulations of Nitrogen Removal via a Partial Nitrification-Anaerobic

Ammonium Oxidation in a Membrane-aerated Biofilm Reactor

XudongZhao

F72778

9

The Key Problems in the Design of Lift-sliding Mechanical Parking System XuhongZhou

F50720

1

Recovery of copper resource from mine solid waste using microbial technology YingboDong

F16272

3

Influence of Curing Temperature on Mechanical Properties of Engineered Cementitious

Composites

YuZHU

F02583

3

Numerical study of Rock Fracturing during blasting excavation ZhangTaoZhou

F24640

1

Spatial Distribution and Pollution Sources of Heavy Metals in Sediments of Nansi Lake Zhijian Li

F50555

8

Experimental Study of Environmental Noise Induced by Elevated Rail Transit of Beijing Metro

Line5

ZhiliNie

F42881

8

Preparation and Comparison of Surfactant-Modified Electrodes on Titanium Substrate ZhirongSUN

F44846

0

A Study on Partial Nitritation Process of Ammonia-rich Wastewater in CSTR ZongshengZhao

24


27/153

Oral_12: The Chinese Symposium on Mechanic Automation and ControlEngineering

No.3 Room, South Lake Ballroom ,5

th

Floor Time: 14:30-17:15

June 28Paper ID Paper Title Author

E117854 Study on Control Method and System of Multi-shaker Random Vibration Test Chen Zhang-wei

E273588Research on the anti-impact characteristic of hydraulic luffing system on mobile crane chengzhenwang

E063667The research of the treatment of traditional Chinese medcine wastewater by MBR CHENHong

E603604 Static and dynamic performance Research on Proportional Solenoid Hai-boXie

E783587Design and performance analysis of compression chamber of single piston hydraulic free pistonengine

haolingren

E858925Analysis of Inductance Variation in Permanent Magnet Linear Synchronous Motor haowang

E731602Hydraulic system control logic for trunk line aircrafts HaoYiJIANG

E082432Tool Design and Process Tests of Hot Stamping for Advanced High Strength Steels Jianping Lin

E214849Automatic Control and Energy-saving Mechanism of Internal Circulation Two-platen InjectionMolding Machine

JiaoZhiwei

E450100

4

Study on Compressor Health Management System liaopingping

E710113

1

A MEMS Density Sensor Based On Mircro-Rectangular Cantilever Libo Zhao

E048439Effect of Hardening Rule on Springback Prediction for an Open-Channel Shaped Part of DP600Steel

maokanglv

E732108

8

Research on Navigation of Substation Patrol Robot Based on Guideline Visual Recognition MinZuo

E013101

1

Study on Mold Separation-based Precision Injection Molding Method PanpanZHANG

E06033 Research on Cam Grinding Process used On-line Variable Velocity Based on Fuzzy ControlTheory

Peng Baoying

E145228 Structure Topology Optimization under Static and Dynamic Loads QiaoZhang

E850719Virtual prototype simulation of a 3-RRS flexible parallel manipulator ShanzengLiu

E531524Morphologic matrix based on multilevel vector representation WeiFu

E526107 Influence of bearing locations on dynamic characteristics of the system with flexible rotorsupported by magnetic bearings

XieZhenyu

E662356 Preparation and Application of Benzoguanamine Formaldehyde/Silica Composite AbrasivesSlurry

XuefengXu

E603105

8

Research on two-dimensional measurement technology of dummy positioning in vehicle crashtest

yongwang

25


28/153

Part V Poster Sessions

Monday Morning, June 28

Poster 1: Automation Control

No.2Room,EastLake Ballroom, 5th Floor Time: 08:30 11:45, June 28

PaperID Title Name

A0005

1

Variable-Rate Fertilization Control System Based on Fuzzy PID Control Strategy ChunyingLIANG

A0016

70

Research on Steam Turbine Speed Fuzzy Self-tuning PID Control during Island

Formation

FeiWANG

A0021

155

Theoretical study on effect of niobium on TiAl(010) surface carburization YanpingLiu

A0021

899

Analysis and modeling of the glitch error in current-steering D/A converter SiHong-Wei

A0032

060

Power Cable Fault Diagnosis System Based on LabVIEW MeiWang

A0034

73

Study of Intellectualized Fluorescence Spectrometer with Optical Fiber WANGJiulong

A0037

04

The Application of RTOS in Microcomputer Protection Device ShuguangLiu

A0051

335

Design and Realization of a New Combustible Gas Alarm System Hanyaozhen

A0057

53

Order Quantity Problem for Fuzzy Market Demand LILi

A0071

908

Simulation and Evaluation of PID Control and Fuzzy Control zhang haixia

A0071

930

Monitoring and protection system of roadheader cutting motor based on CAN bus XiaohuoLi

A0111

372

Adaptive Backstepping Control of Chaotic Systems with Unknown Parameters MA jun-jie

A0111

451

Research on Fault Diagnosis Method of Pressurization System of Water-jet Cutting

Machine Based on Support Vector Machine

HaixiaZhang

A0112

2

Study on the detection of velocity direction for belt-broken XiZhang

A0131

871

Design of DC pulse power supply based on the single-chip computer and PWM yongjiegu

A0141

389

The research and design of transmission error measurement system based on an

absolute displacement sensor-time grating

ChenZiran

A0147

62

The Simulation and Analysis of the Shunt Active Power Filter Yi-hong He

26


29/153

A0152

254

Monitor and Fault Diagnosis of Vibration Abnormal State of Gearbox for Shape

Rolling Mill

REN Xueping

A0202

048

Research on Improving the Accuracy of the Ultrasonic Flow-meter with time difference

Method

LiMingwei

A0204

47

Proportional-Integral-Differential(PLC) control system design of compressor

performance test bench

YituanHE

A0211

985

Global Path Planning Method Based on Geometry Algorithm in a Strait Environment yajieliu

A0221

469

Constructing Business Intelligence Solution with SharePoint Server 2007 Zhijun Ren

A0221

825

Semantic Analysis on Knowledge System of Intelligence Science and Technology YinghuiHuang

A0231

023

The LQR Real-time Control for the Inverted Pendulum Based on PSO guopingliu

A0248

88

Nighttime video smoke detection based on active infrared video image YunChangLiu

A0251

974

Decision Support System for the Evaluation of Power Grid Investment Benefit duancheng

A0282

052

Analysis of Impact on the Operating Speed of EMUs Which is Caused by the

Decreased Catenary Voltage

XiaogangGou

A0287

02

Application and Theory of Auto Bit Feeding Technology in the Drilling Rig DingFeng

A0301

862

Mechanical characteristics of circular arch span pipeline in movement of fixed end zhanghuimin

A0305

79

Design for Virtual Engineering Structural Experimental System Based on UML ZHANGRui

A0321

498

Design on the level control system with high-precision for the Linwei

A0328

11

Application of Kalmans Filtering Method in Construction Control forCable

Replacement of The Cable-Stayed Bridge

QuanshengSun

A0341

236

A Robust Targets Matching Algorithm in 3D Reconstruction from Multi-Views YuanJian ying

A0371

234

Silicon Microgyroscope Based on SPLL and LMSD DunzhuXia

A0381

330

Design of laser marking controller based on ARM+FPGA GuopingZhou

A0382

038

Hierarchical Behavior Structure for NAO robot utilizing Fuzzy Ineference Systems BahramJozi

A0415

52

Diconnected components Kernel of Directed Graph JiangQiang-rong

A0481

635

Global Positioning of Robot Manipulators via NPID-like Regulators with Two

Nonlinear Integral Actions

baishunliu

A0507

07

Study on the Control System of Friction Stitch Welding Device huigao

A0511 Extraction of Radar Target Length Based on High Resolution Range Profile liaokuo

27


30/153

878

A0521

459

Design of Mould Trace Real Time Information System Based on RFID Tan haiyan

A0532

436

Simulation Implementation of FH Communication System based on General Quadratic

Prime Code

jihualu

A0551

337

Research of detecting system ofTower Crane based on.NET Environment JianxingZHOU

A0554

8

Management of real estate enterprise based on philosophy core of dissipative

structures: entropy

YancangLi

A0556

48

Global Synchronization Control for Lorenz System Chang-FeiTong

A0581

326

Electrical transport in small-world networks Pan Yong-Cai

A0581

775

Genetic Algorithm Based Computer Control System for Reheating Furnace

Combustion

panlian

A0601

104

Prediction for the warpage of the plastic sheet based on artificial neural network QiuboQian

A0611

304

A Six-degree-of-freedom Virtual Mouse based on Hand Gestures xingfengwang

A0619

25

Switching Control of Regenerative Retarding of Electric Vehicles XieJing

A0641

331

An Embedded Corrosion Data Acquisition System for Marine Platform LinHaibo

A0642

082

Design of Intelligent Garbage Can Based on Infrared Sensors WeiXiaoHui

A0732

081

Nonlinear Control of Permanent Magnet Synchronous Motor Based on The Method of

Control Lyapunov Function

chenghuaFan

A0732

137

Study on Error Analysis of Measuring Projectile's Speed using Induction-Type Coil

Target

LiBoquan

A0759

99

Look-ahead Difference PID Control Application in a Reboiler XiaolingLuo

A0809

88

Parallel chaos optimization algorithm ChunboXiu

A0821

807

Chaotic Communication Systems: An Iterative Learning Perspective MingxuanSun

A0822

040

Using the Triangle Inequality to Accelerate TTSAS Cluster Algorithm ChunxiaHe

A0822

61

A Two-stage DEA Model to evaluate the Science and Technology Activity Efficiency YUANLina

A0841

959

Method to transform a kind of semi-positive quadratic problem into positive quadratic

problem

MingyuWang

A0846

70

Neural-Network-Based Six-axis Force/Torque Robot Sensor Calibration FeiWANG

A0851

562

Heavy Machine Failure Maintenance Stratege Study based on FMEA dengchao

28


31/153

A0872

117

Application Research of Rough-GA-BP Method in the Real Estate Early-warning

System

HanDongmei

A0881

76

Analysis of inductor-current of Boost DC-DC Converters and Its Design for intrinsic

safety

tongjun

A0882

190

Implementation of the powder dispensing of digitization GENGXin

A0882

326

Experimental investigation of Coupling Fiber-optic Sensor for Vibration Measurement XuJian

A0887

36

The Dynamic Analysis and Experimental Research of Balancing Valve Used in Truck

Crane

XiaofengLiu

A1011

643

Interleaved boost expansion flow technology in robotics application ZhimingWen

A1021

157

Multispectral Remote Sensing Image Restoration Based On Fuzzy Genetic Algorithm TaoZhang

A1039

8

Research on the Prediction of Breath Period Signal Based on RFN Network of Self-

Adaptive Genetic Algorithm

sujunjie

A1042

011

Analysis on technology of passable ray and airtight cavity temperature measurement

applied to hot metal

Yang You-song

A1051

285

Simulation of Position Control for X-Y Table with Nonlinear Friction and Backlash ZezhongXia

A1052

325

A Model Set designing method based on idiotypic network xuxue-song

A1071

428

Simulation of Phase Transformation in Welding Heat Affected Zone of 9% Ni steel chunyanyan

A1115

17

Complicated pseudo parallel genetic algorithm for optimization design bitaoli

A1121

662

Forecast and Analysis of the effectiveness of Changsha Rail Transit Based on CA/GIS PeijuanZHU

A1121

969

Reliability Study on Absolute Pressure Sensitive Chip Vacuum Packaging GuanRongfeng

A1141

904

Optimization and Simulation of a Fuzzy Controller Based on Stochastic Bilinear

Systems

JieYANG

A1151

977

Research on the elevator door control system based on the image processing

technology

zengxi

A1161

907

Fast Vector Quantization Algorithm Based on Vector features ShanXue Chen

A1172

286

Empirical Analysis on Co-movement of Stock Price of Gold Mine Enterprises and The

International Gold Price

JingWANG

A1201

125

Current Measurements and Diagnosis on Dielectric Barrier Discharge in a Coaxial

Geometry at Atmospheric Pressure

XuechenLi

A1201

266

Fault diagnosis of the blast furnace based on the Bayesian network model LianPan

A1222

128

Electronic reader for the blind based on MCU huangxiaoli

A1222 A face recognition method based on DiaPCA and neural network HongyuanWang

29


32/153

220

A1233

97

Design of the high-speed A/D Sampling Control Circuit basing on FPGA hongyanDong

A1241

948

Conjugate Virtual Array Adaptive Beamforming ShuyanNi

A1242

238

Research on Predictive Functional Control over Lossy Packet Networks Yinyang

A1252

099

Study of Locating Ways of Pipelaying Manipulator wangdan

A1261

034

Modeling and Simulation of Avionics Bus Signals BaiHe

A1261

944

Research on Control Charts and Process Capability Analysis in Supplier Quality

Management

QinghuaZhang

A1266

20

Dynamic Control of Propagating Electromagnetic Waves Using a Plasma Photonic

Crystal

WeiliFan

A1271

290

Error compensation and implementation of embedded high-precision magnetometer LeiYu

A1312

130

An Ultrasonic Approach to Measure the Density of Batter Electrolyte LiuJia-xin

A1315

09

Fault Prediction Based on Data-driven Technique LuhuiLin

A1318

37

The Design and Research of PC Software in Hydraulic Supports Control System Based

on VC++

ZhangWei

A1362

75

Fault Diagnosis of Analog Circuit Based on Wavelet Neural Networks and Chaos

Differential Evolution Algorithm

Mu Li

A1381

291

Element Damage Detection of Steel Truss Structure Based on the Method of Wavelet

Transformation

zhanglimei

A1388

30

Setpoint Optimization for Billet Reheating Furnace based on Dynamic Immune

Algorithm

XuegangSun

A1401

449

Forward Simulation Platform of Driving Performance on Intelligent Hybrid Electric

Vehicle

TaoChen

A1408

67

Nonlinear model of the position of dynamic soft reduction in bloom continuous casting

process

yubaozhang

A1411

398

Robust Stability Analysis of Discrete Interval Systems LingQin

A1422

112

Study of an auto-detecting system of micro-aperture ZhouGuoPeng

A1422

340

Policy Modification in Flexible Agent yanbinpeng

A1431

068

Weighted Super Resolution Reconstruction based on an Adaptive Regularization

Parameter

MeiGong

A1442

170

Application of Improved Partheno-Genetic Algorithm in Distribution Network Switch

Optimal Planning

JunhongCHEN

A1461

315

Teleoperation System of Internet-Based Multi-Operator Multi-Mobile-Manipulator LiangMa

30


33/153

A1471

446

The Optimal Drive Current of Solenoid Valve and its Effect on Fuel Injection

Characteristics

yupengwang

A1506

61

Local Fractional Fouriers Transform Based on the Local Fractional Calculus YangXiaojun

A1511

442

Stator Vibration Analysis of Bearingless Switched Reluctance Motors YanYang

A1511

667

Electrical properties analysis and control in electric hot drilling Xulanying

A1521

754

A. Simulation Design of LC VCO Based on 0.18m CMOS Technique jianfangye

A1529

22

Study on the Measurement System for Current Velocity and Direction at Closure Gap HongmeiZhang

A1531

479

The Precision Analysis and Simulation based on SLAM yangping

A1551

876

Applications of wavelet-packet to fault analysis of hydro-generator unit haiyingliu

A1561

294

Design and Realization of Low-cost, Fast and High-precision FOG North Finder ShenJun

A1564

32

A Novel Testing System Based on Virtual Instrument for Synchronous Generators liu ping

A1567

30

The optimum element microlens diameter designing of the integral photography xuzhongbao

A1581

806

Knowledge Reasoning System Architecture based on Description Logic fuzhensun

A1611

61

Design a digital notch filter based on Matlab program for photoacoustic gas sensing

system

LiLi

A1623

46

Time Synchronization Method Based on Dynamic Network and Its Application in

Substation Automation System

NaYI

A1623

49

The phase-locked interferometric method for nanometric position control SuanXU

A1631

721

The Research on Slab Thermal Properties Estimated by BP Artificial Neural Networks MinDong

A1636

18

System development of quantitative ultrasonic detection for osteoporosis zhanglei

A1641

573

Novel Hysteresis Current Controller for Active Power Filter ZENGJIANG

A1649

06

Modeling and Dynamic Response Simulation Of GTO-Based STATCOM Huang Shao-Ping

A1656

40

Application Study on Control Strategy for the Hybrid Electric Public Bus WangBaohua

A1656

82

The Decoupling Control of Induction Motor Based on Artificial Neural Network

Inverse System Method

SongYongxian

A1702

247

Research of Load-Balance Technique for Cooperative PSO liulei

A1742 Design of Hybrid Integrated Capacitive Acceleration Sensor maxihong

31


34/153

104

A1747

10

Design and Simulation of LQR Controller with the Modeling and Analysis of Linear

Inverted Pendulum

HongliangWang

A1752

77

Research of Fire Detection based on Process Characteristic and LM Arithmetic Erli Liu

A1767

59

Research on Gas Station of pipeline for Nondestructive Testing Technology XiedongCao

A1802

000

Support Vector Machine algorithm Based on Kernel Hierarchical Clustering for

Multiclass Classification

HuaitieXiao

A1822

44

Researched on a Novel PV Power Inverter Applied in Micro-grid WeiWang

A1825

32

Defects inspecting system for tapered roller bearings based on machine vision QinghuaWu

A1841

806

A Discovery Framework for Semantic Web Services in p2p environment fuzhensun

A1851

00

Blind Path Identification System Design Base on RFID JINYINGCHEN

A1867

31

Optimum Design of Permanent Magnet Synchronous Motor Based on Gene Handling

Genetic Algorithms

JianGao

A1867

8

MODEL EXPERIMENT STUDY OF SELF ALIGNING SYSTEM OF PINION OF

LOW SPEED HEAVY LOADING

YuyiZhai

A1869

50

The effect of SRS to DWDM Optical System JuanniFang

A1872

067

Control Analysis and Autopilot Design for Static Unstable Missiles YaoJunkui

A1881

830

A New Approach For Real-time Detection Of Abandoned And Stolen Objects WeihuaWang

A2008

60

Analysis of Spatial Distribution of Hexagonal Patterns Based on Fourier Spectra and

Spatial Correlation Function

LifangDong

A2051

810

Pedestrian tracking using particle filter algorithm FenXU

A2075

35

Research on Identification for Drawbead Geometric Parameters Based on Genetic

Algorithm and Equivalent Model

LifenHan

A2101

965

Design of digital thermometer based on AT89C52 Single Chip Microcontroller Zhang Qian

A2111

126

A Study on Operational Efficiency of the Electricity Market Base on Synergetic Theory zhangpinyi

A2112

120

Bayes Reliability Assessment For Micro-accelerometer based on failure statistical

model

zhoupengbin

A2131

022

Path Planning of Inspection Robot Based on Ant Colony Optimization Algorithm zhaoshaogang

A2152

402

Gray Image Watermark Algorithm in Integer Wavelet Transform Domain yqchen

A2155

12

Research on shooting action of soccer robot based on genetic-fuzzy algorithm wangqiang

32


35/153

A2162

41

A Resource-Efficient Decoder Architecture for LDPC Codes QinzhiHong

A2172

262

Overlap Analysis of the Images from Unmanned Aerial Vehicles ChengXing

A2173

90

Development of a remote process control laboratory using configuration software HuazhongWang

A2181

087

Modeling and control for a six-rotor aerial vehicle LiangliangYin

A2271

605

Observer-based $H^{\infty}$ Control of Fuzzy Systems with Quantized Feedback CaixiaLiu

A2277

64

Electrical Parameters Measuring of SVC Based on CS5460A ChenYang

A2301

703

Saddle-point Equilibrium Strategy for Continuous Singular Bilinear System huainianzhu

A2307

23

Study on Detecting Laser Interference Fringes Using Four-Quadrant Optoelectronic

Detectors

ShuzhenWANG

A2339

13

Study on Fault Diagnosis Model of Condensate and Feed Water System Based

Information Fusion

MAJie

A2353

22

Research and Development of Visual Inspection Device of Metal Aerosol Can Cover Su Caihong

A2381

851

License Plate Location Method Based on Integrated Features and Marker-Controlled

Watershed algorithm

HongyuanWang

A2461

417

Integrated Design of Measurement and Control System for Photovoltaic Generation XiaoliXu

A2462

323

A Novel FPGA Control Process with AI-Fuzzy VCR Algorithm YEQIUSUN

A2471

182

Research on Local Area Network of Marine Gas Turbine Distributed Control System Jian-huaGAO

A2532

132

Simulating Research on Fuzzy PID Control of Permanent-magnet Vacuum Circuit

Breaker Synchronous Closing

XinmeiSHU

A2533

04

Research on X-ray Non-destructive detection method and system of strips Density in

Case

QianFeng

A2541

978

A Wavelet-Based Watermarking Scheme with Authentication And Recovery

Mechanism

LiuHui

A2545

86

Deadlock-Irrelevant Resource in Petri Nets Models of Automated Manufacturing

Systems

Hao Yue

A2551

040

Simulation of ARINC429 Bus Signal and Analysis of Transmission Characteristics YanLiqin

A2551

999

One Fast Discrete Correlation Algorithm in the Frequency Domain CuiHongmei

A2559

2

Path planning of flying robot for overhead powerline inspection based on key points

algorithm

LiuChang-an

A2571

549

A statistical model for gears noise prediction in gearbox GuangmingCheng

A2572 A Novel Design of Master Control Syetem for Induced Polarization Logging HuangZhen

33


36/153

82 instrument

A2581

201

vibratory isolation design of vibratory pile hammer xiaofeng

A2581

472

Individual Spark Advance Adjusting in a Multi-Cylinder Spark Ignition Engine NiuDi

A2611

478

Study of Fuzzy Neural Network on Wind Velocity control of Low-Speed Wind Tunnel XuanChuan-Zhong

A2621

965

Intelligent electric valve design of the application of PIC Single Chip Microcomputer Zhang Qian

A2627

54

Gait planning of the Gecko-like robot transition to wall jingwang

A2669

00

Temperature control and PID parameters optimization based on Finite Element Model ZhengJiaWang

A2741

972

Exact controllability for open loop of the KdV-MKdV equation DianchenLu

A2761

384

Study on the Development of Synthesis Evaluation System Based on an Improved

Fuzzy-AHP Algorithm

weihuang

A2781

331

Development of Wireless Monitoring System Based on Digital Filter in Oil Well LinHaibo

A2782

115

Research of Electro-hydraulic Servo System Model and reduction SongLiwu

A2782

433

Laser Line-scanning Based Customized Shoe-Last System ShunwangXiao

A2802

210

MIMO Identification of 3 DOF Planar Micro Positioning Stage YANGJin

A2803

99

Equipment Modeling for Hardware-in-the-loop Simulation System of Infrared

Controlling and Guiding

guozhenxu

A2811

012

A Novel Color Image Filtering Algorithm-Based on gray scale space extremum-median

filter

LicaiZhang

A2821

645

Transmission Characteristics of Oil Film between Rotating Disks Based on Variable

Viscosity and Inertia Force

HOUYoufu

A2822

435

Fault Diagnosis Research in Nonlinear Circuit based on Improved Particle Swarm

Optimization Algorithm

HaiyingYUAN

A2841

950

Design and key technology research into auto-targeting fire extinguishing system of

interior large space

guolianghu

A2851

542

Optimal tuning PID controller for first order lag plus time delay system by Election

Campaign Optimization algorithm

WengeLv

A2851

86

Study on Stability of Machining Center Spindle System Based on Vector Control yidai

A2861

106

Design of Flexible Assembly Control Systems Based on data medium Moby-I Song Zhifeng

A2871

059

Use of Accurate GPS Timing based on Radial Basis Probabilistic Neural Network in

Electric Systems

Mohammad RezaMosavi

A2871

438

Study on the sensitivity of flow rate change after head variation in rotary blood pump

with constant voltages

TengJing

34


37/153

A2887

42

Lightning Risk Assessment of Teaching Building and Electronics Based On the New

National Standard

CUIXUE

A3001

209

Harmonic Analysis of Power Quality Monitoring Device Based on IEC61850 WangYing

A3008

15

Cycle Kernel Based on Spanning Tree JiangQiangrong

A3011

036

Three-Dimensional Flow Field in a Large-scale Gas Control Valve FangCao

A3049

89

Research on Virtual Assembly and Simulation of CNC Grinder weimingdu

A3052

178

A new Integrated Gate Driver with Shift Register Circuits Employing 4 Clocks for

14.1-inch TFT-LCD

ChangdeHe

A3061

843

Target Match Recognition method Based on Contour_area Feature GUOWen pu

A3062

377

Experimental Study of Adiabatic Shear Critical Conditions in Orthogonal Cutting of

AISI 1045 Steel

GuoheLi

A3126

36

CAN BUS Network Design based on Bluetooth Technology RenXiaohong

A3131

223

The Application of Synchronous Triggering Technology in the Flight Data Simulation

System

Jin Xiaokang

A3132

146

Numerical simulation of solar energy/air compound source heat pump unit Zhangzhigang

A3132

353

A Design of ERF Shock Absorber Base on Fuzzy Control Technology hefengqin

A3154

95

ETMD System in Vibration Control of Control Valve and Friction Compensation YantaoAn

A3202

157

Study on the method of automatic inspection the large spinneret yangchongchang

A3212

291

Simulation study on ship motion control based on AOCS algorithm hongbo wang

A3231

606

Intelligent Vehicle System Design Based on MC9S12 Microcontroller HeWang

A3251

279

Study on scheduling of steelmaking continuous & mould casting WeiLiu

A3251

532

Optimal Speed Control System of Generator based on Chaotic Particle Swarm

Optimization

huilanjiang

A3252

443

A Structure Measure of Multicast Tree based-on Fuzzy in MANET Ning Chen

A3253

78

The Design and Implementation of Soccer Robot Control System huiliangwang

A3261

48

Reliability Analysis on Dual Power Supply Controller based on FMEA and FTA Huang Shize

A3271

148

Casting back errant stage in multi-stage manufacturing process JialiZhao

A3271 Vector Control for the Linear Induction Motor Based on the Position Closed-loop ZhangMingyuan

35


38/153

365

A3274

05

Error Analysis and Improved Measures for Centralized Multi-users Electronic Energy

Meters

YAO Jiafei

A3321

537

The LimeKiln Temperature Control Based on Setpoint Filtering Two-degree-of

-freedom PID

wuwenjin

A3331

904

Design of Multi-channel Ultrasonic Flowmeter based on ARM JieYANG

A3351

73

A CT Centered on Rogowski Coil Applied for Low-Frequency Heavy Current

Measurement

weiboli

A3352

284

Image Feature Extraction Based on Compressive Sensing With Application of Image

Denoising

Qiang Hou

A3357

13

The research of nonlinear control based on fuzzy neural network fanyuanyuan

A3364

63

Neuron Learning Mechanism on China Construction Enterprises knowledge Gap

Compensation

jingxiaozhang

A3364

68

Virtual Program Design and Development by ActiveX Control Technology of LXI

Instrument

FengHuang

A3401

052

The Design of the ADALINE Sensor Of the Biogas Generator wangzuoxun

A3401

214

Research on Look-ahead Control Strategy Based on Turbo PMAC for Parallel

Kinematics Mechanism

Sunhongchang

A3431

880

Research on Non-contact Measurement Technology for the Cylindrical Grinder HonggeSun

A3441

480

Research on Neural-Network-Based Real-time Thermal Load Prediction DongWei

A3448

85

A New Smoke Concentration Measurement System: Low-Cost, High-Accuracy, and

Easy-Implementation

YiZeng

A3449

33

Feature Extraction for Vibration Signal of Asynchronous Motor Based on Quaternion

K-L Transform

TongJia

A3451

556

The Mechanical Performance of Piezoelectric Fiber Composite Actuartors Yong-gangLIU

A3454

71

Adaptive Control of the Grinding and Classification System Based on Fuzzy RBF

Neural Network

WANGYun-Feng

A3461

906

Application Research on RoboCup 3D Agent Walking using Improved HEDGER

Algorithm

hongyuanwang

A3471

197

Improved AdaBoost Algorithm Using VQMAP for Speaker Identification HaiyangWu

A3488

80

Based On CCD Imaging Ball Outside The New Algorithm For Extracting Profile chijunzhang

A3501

010

Study of Dynamic Calibration of Cement Stabilized Soil Mixing Plant konglingyun

A3509

62

A study on the residual life of high-temperature boiler tube for inner wall oxidation

thickness

Zhi-yuanZHAO

A3512

59

Design of PC/104 Processor Modul

;research on soft start up of vsc hvdc2

Documents