CX

X

H6N6WH6WG6SH6S6

DCA

GF

H*I*J*

H4N4WH4WG4SH4S4

Z

ESB

W

K*L*

Normal, closed tip (Standard)Pointed tipWeld padWeld pad, removable (Fasttrax)Gas/Air, exposedEnlarged tipReduced tip

NK*M*O*R*W*Y*

RESISTANCE TEMPERATURE DEVICES (RTDS)

3-1

Single threaded (process)Double threaded w/ oil ringDouble threaded w/ retainer

Single threaded (process)Single threaded reversed

SS w/ SS ferruleSS w/ Teflon ferruleSS w/ Lava ferrule

4” NUN, SS4” NUN, Galv4” NUW, SS4” NUW, Galv4” NU, 304SS4” NU, Galv

Thermometer Class[page 3-18]

≥ F 0.30≥ F 0.15

≥ 1/2 F 0.10≥ 1/10 F 0.10

BA

AA1/4 AA

± 0.3°C (Competitor’s Std)± 0.15°C (JMS Standard) ± 0.06°C ± 0.03°C (Best Accuracy )Other, specify [3-22]

AB*C*D*E*

Cryogenic (-196°C to 0°C)<200°C (392°F) =3 Teflon<285°C (550°F) =5 Kapton<350°C (662°F) =1 Fiberglass<660°C (1220°F)

W

#8 STANDARD INDUSTRIAL ATTACHING DEVICE

#7 MAX. TEMPERATURE AT WHICH TIP WILL BE EXPOSED

__” Immersion length in inches

#6 LENGTH (L) (See sketches on Pg. 3–1 and 3–2 for L”)

KLM

316 Stainless Steel316 LSSI-600 (Use if symbol #7 >500°F)

#5 TUBE MATERIAL [11, 12]

3/8” (.375”)1/4” (.250”)3/16” (.188”)1/8” (.125”)Other, specifyN/A

#4

Single Standard constructionDual Standard constructionSingle Swaged construction Dual Swaged construction Other, specify

SDJKX

#3 ELEMENT CONSTRUCTION [4] [3-11]

#2 ELEMENT TYPE [4, 9, 10, 11, 15, 18, 22] Platinum 0.00385 alpha (W/W/°C)

B

BEP*S*X

BNE S K 12”3

#1 DESCRIPTION

3

ABCDXZ

* If no transition (Z) is in symbol13, we recommend these corre-sponding selections for primarywire insulation in symbol 10.

Note: Wound or film resistorsmay be used.

* For compliant results, use 4 wire RTD for highaccuracy (types P & S).

TUBE DIAMETER - MUST CHOOSE 1 FROM EACH COLUMN [5-30, 1-13, 1-14]

Resistor Class[page 3-18]

Resistor Accuracyat 0°C

RTD

* When selecting theseoptions, a descriptionmust be provided.See 4-15 for exampleof removable weldpad.

L

Note: Use swaged for high temperature, bendability, high vibration and/or longer than 6 ft.

Note: For CSA Certified assemblies, see Page 4-17.

Adjustable springDouble threaded Bayonet assembly

Double threaded Double threaded

SS w/ Nylon ferruleBrass w/ Brass ferrule

6” NUN, SS6” NUN, Galv6” NUW, SS6” NUW, Galv6” NU, 304SS6” NU, Galv

(attach head)

Acronym Definitions Galv = GalvanizedS/L = Spring Loaded NUN = Nipple-Union-NippleSS = Stainless Steel NUW = Nipple-Union-Welded Fitting

NU = Nipple-Union-Spring Loaded Fitting

*Length calculated without attaching device, page 1-2.

Other, specify N/A

Spring Loaded Note: Spring material, 1000°F rated (for 1/4" OD sensors)

Welded

Compression

Extension Assembly (See 1-3 for more ext. options and details

Other OptionsNote: L is the overall length of the sensor to the transition,

wire or plug. This includes non-fixed attaching devices.

Teflon Coated, SSOther, specify

[ ] Brackets indicate page numberswhere additional helpful informationcan be found in technical catalog.

Now available online at www.JMS-SE.com/TechnicalCatalog

AKOX

8H8N8I8E8D8M

3/16” ID SS flex armor (Standard)3/16” ID SS flex armor teflon coated white3/16” ID SS flex armor teflon coated black1/8” ID SS flex armorSS overbraid

Stainless steel tagPlastic tagPaper tagLaser etch on probeCalibrate at specified point(s).Corrections data provided foreach point.

BCFWM*DEGWF*V

Y

IJ

P

U

LMNQRSS

Miniature plug Standard plugHigh temp plug (< 800°F)Microphone style plug (6DA)Miniature jackStandard jackHigh temp jack (< 800°F)Microphone style jack (6DA)Hermetic connector plug(6DC)M12 watertight connector plug

Aluminum, NEMA 4X, FM, CSA (6IA/6B4)316 stainless steel, NEMA 4X, FM, CSA(6ISS/6B4)Aluminum, NEMA 4X, FM, CSA, ATEX, IECEx(6IAIEC/6B4)316 stainless steel, NEMA 4X, ATEX, IECEx(6ISSATEX/6B4)Aluminum w/ hinged cover (6L / 6B4)Aluminum w/ screw cover & chain (6M / 6B4)Cast iron w/ screw cover (6N / 6B4)Black nylon, NEMA 4 (6Q / 6B4)Aluminum high dome w/hinged cover (6R /6B4)316 stainless steel w/ screw cover & chain(6SS / 6B4)

6**

789

3-2

Heat shrinkSize on size3/8” OD1/4” ODCuttable (See full catalog )Other,specifyNo transition

RESISTANCE TEMPERATURE DEVICES (RTDS)

P

Fiberglass braidTeflon (Standard)Hi-temp glass braidKapton

1T A

2 Wire3 Wire4 Wire

TYW

#12 WIRE CONFIGURATION [17, 18]

Heat shrink / sleevingJacket to match primary insulationAlum mylar shielded and jacketed to match primary insulationN/AOther, specify

ABCDF

GHJZX

#11

1__”3__”4__”5__”

#10 LEAD WIRE TYPE & LENGTH IN INCHES [SEE SECTION 7]

#9 PROCESS NPT / CUSTOM EXTENSION ASSEMBLY [1-3 ]1/8”1/4”1/2” (Standard w/ symbols W, S, & C above)3/4”Other, specify*N/A

LMPOXZ

Y3-36” A

Premium calibration report. Corrections data will be providedfor all. CE Marking [PAGE XV]Guide 17025 calibrationBar Code

1*2*3*4*5

#15 OPTIONS USE ONLY IF APPLICABLE [INTRODUCTION]

HSTRQXZ

#13 TYPE OF TRANSITION [14]

Note: For high humidity / moisture environments, < 500˚Fput a “2” after your selection.

Note: For high temperature at the transition area (> 500°F)please use an X stating type of transition and maximumtemperature.

Note: Use a double symbol (Ex. TT) for 2 separate lead wires if dual elements.

ARMOR OR HEAT SHRINK / JACKET [7-7]

Other, specifyN/A

X__”Z

Note: All wire in tubes > 1/8” OD will be 24 AWG.Smaller tubes will have a max. of 28 AWG. If no transi-tion or armor is specified, wire may be fragile. JMSstandard lead wire for RTDs is stranded plated copper.

#14 COLD END TERMINATION [SEE SECTION 6] Pick as many as applicable

SE

CTIO

N 3

*To add a custom extension assembly, select "X"and specify. (Ex: NUN5G1)

*Always specify info required on tag.**You must specify increments & range. (Ex. 0 - 300°F, 0.1° increments)

Note: Immersion shown (#6) is overalllength of tube for gas air sensors.

Note: L is the length of the sensor to the fixed attaching device.

Connectors Heads [6-1] visit www.jms-se.com/headspecs

Gen

. Pur

pose

Exp

. Pro

of

OtherTransmitters

Note: Add span range after transmitter selection. For ex: 8H(0-200C).

* Use double symbol here for matching female connector. (Ex. B/BB male with matching female).

Bare EndsSpade Lugs (6SL)Open terminal block (6B4)Other, specify

Isolated transmitterNon isolated transmitterHart ProtocolIntrinsically SafeHart / Intrinsically Safe Integral transmitter (see 3-5)

RTD WITH INTEGRAL PC PROGRAMMABLE TRANSMITTER

3-5

OPERATING INSTRUCTIONSThis thermometer is a non-contact infrared ther-mometer. Simply aim the thermometer at thetarget with the probe and press the measuringbutton to display the surface temperature. Thedistance to target diameter ratio (Distance:Spot)is 1:1 therefore the device should be positionedas close to the target as possible.

°C / °F:The units of temperature indicated on the probecan be changed from °C to °F and back bypressing the pick hole under the back cover witha pointed object. The pick hole can be clearlyidentified as the hole on the opposite side of theprobe from the indicator directly underneath themarking: °C / °F

BATTERY REPLACEMENT:When an empty battery icon flashes in the LCDthat indicates that the battery is low and shouldbe replaced. Confirm that the power is OFF,loosen the cover at the top of the sensor in acounter-clockwise direction and replace the twoLR44 1.5V cell batteries. Please remember todispose of the batteries properly and to keepaway from children.

To order, use JMS part number IR200

SPECIFICATIONS:

Measurement Range: -33 to about 220°C (-27.4 to about 428°F).

Operating Range: 0 to about 50°C (32 to about 122°F)

Storage Range: -20 to about 65°C (-4 to about 149°F)

Accuracy(Tamb = 23°C ±3°C) ± 2% of reading or 2°C (4°F) whichever is greater.

Resolution: 0.1°C / 0.1°F

Response Time: 1 second.

Emissivity Range: 0.95 fixed.

Auto switching off: 15 seconds.

ECONOMY HAND HELD INFRARED SENSOR

RTD with 4-20 mA INTEGRAL OUTPUT (RTD goes in, 4-20mA OUT!!)INDUSTRIAL STYLE INTEGRAL TRANSMITTER (Transmitter Option See Pg. 3-2, #14, 8M)

FEATURES: • PC Programmable, • NEMA 6P (IP67) rated with M12 connector.• Ideal for most applications from -60 to 320°F.• Ambient Temperature limits -40 to 185°F.• Quick-n-Clean M12 connection for easy replacement.• Carry a 4-20 mA to your PLC directly from the RTD with no special equipment.• Available in fixed immersion and spring loaded for thermowells!!

See Pg. 4-3 for wiring diagrams.

Only!$35.00

Ideal for high moisture environments!