resource guide - amazon s3 · resource guide - 5. fry reglet corporation, 1-800-237-9773, column...

Resource Guide

Fry Reglet Corporation, 1-800-237-9773, www.fryreglet.com

Stepped Outside Corner

Multiple Stepped Outside Corner

Beveled Corner

Curved Inside Corner

Curved Outside Corner

Bullnose

REVEALS

Reveal Molding

“F” Reveal Molding

“Snap-In” Reveal

“Z” Reveal Molding

Reveal Base

Drywall Corner Reveal

Step Trim

“V” Reveal Molding

Reverse “V” Reveal Molding

“W” Reveal

Reveal/Picture Hanger

Reveal Channel Screed

“F” Reveal

“T” Molding

“X” Molding

“W” Molding

CONTROL JOINTS

Drywall Control Joint

TRIMS

Corner Trim

“L” Trim Molding

Edge Trim

Edge Trim

Radius Corner Trim

Pocket Trim

“J” Molding

Drywall Molding End Closure

Top Track

Ceiling Trim

CORNERS

COLUMN COLLARS AND RINGS

Column Collar

Reveal Column Ring

Wall Angle Column Ring

ACOUSTICAL

“W” Reveal Molding

Drywall/Acoustical Reveal

Acoustical Ceiling Trim

Acoustical Molding

“W” Acoustical Reveal

“F” Acoustical Reveal

“J” Acoustical Trim

SPECIAL SECTIONS

Special Sections

Contemporary Reveal Molding

GLAZING TRACK

Glazing Track / Drywall Ceiling Track

Acoustical Ceiling Tract / Drywall Acoustical Ceiling Track

INTEGRATED FUNCTION REVEAL

Reveal Rail

Chartrail Insert

Hook Insert

DRYWALL MOLDINGS

TABLE OF CONTENTS

RESOURCE GUIDE

PAGE

1111111122222222

3

3333334444

444455

PAGE

556

6666677

77

88

888

FOR PLASTER AND E.I.F.S. MOLDING TABLE OF CONTENTS SEE PAGE 9.

Fry Reglet Corporation, 1-800-237-9773, www.fryreglet.com Resource Guide - 1

REVEAL

Fry Reglet Reveal Molding creates

an attractive vertical or horizontal

recessed reveal in drywall installations.

Reveals can become a design element

to enhance building interiors. Reveal

widths from 1/8" to 6" for choice of

design effects.Drywall

Metal

Framing

Tape & Joint Compound

DRYWALL REVEALS

"F" REVEAL

Fry Reglet “F” Reveal Molding is used

to form wall trim reveal where drywall

terminates against sill, jamb, ceiling or

other finish material in the same plane.

Supports ceiling material.

Drywall

Metal

Framing


"SNAP-IN" REVEAL

Fry Reglet “Snap-In” Reveal is used

with moldings to provide a different

finish detail. The lip on the “Snap-

In” Reveal covers wall covering

edges and prevents peeling.

“Snap-In” reveal is designed for use

on walls and should not be applied to

ceilings.

Drywall

Metal

Framing

"Z" REVEAL

Fry Reglet “Z” Reveal Molding forms a

trim reveal around doors and windows

or between walls and floors.

"Z" Reveal Molding

DOOR JAMB

Metal

Framing


DOOR JAMB

Metal

Framing


"BASE" REVEAL

Fry Reglet Reveal Base is used at

bottom of wall to form an attractive,

damage-resistant recessed base.Metal

Framing



Floor

Drywall

"CORNER" REVEAL

Fry Reglet Drywall Corner Reveal is

used to create a stepped pocket at

drywall corners.

Metal

Framing


Drywall

Drywall

"STEP TRIM" REVEAL

Fry Reglet Step Trim creates a stepped

reveal (either raised or recessed) for

offset multiple layers of drywall.

Metal

Framing


Drywall

"V" REVEAL

Fry Reglet “V” Reveal Molding creates

a V-shaped recessed reveal in gypsum

board walls for a softer-appearing

alternative to conventional rectangular

reveals.

Metal

Framing


Drywall


DRYWALL REVEALS

REVERSE "V" REVEAL

Fry Reglet Reverse “V” Reveal Molding

protrudes from wall surface for a

raised dimensional effect. Reverse

“V” Reveal Molding can also be

used as a chair rail and to protect

wall surface.

Drywall

Metal

Framing

"W" REVEAL

Fry Reglet “W” Reveal creates an

attractive reveal at the intersection

of drywall ceiling and wall. Supports

the edge of the suspended drywall.

Tapeable flange avoids cracking at the

joint.

Metal

Framing

"PICTURE HANGER" REVEAL

Fry Reglet Reveal/Picture Hanger creates

a reveal in drywall which can be used

as a heavy duty picture hanger track

for galleries, commercial interiors or

residences. Snap-in picture hanger clip

has a hole for picture wire to support

artwork and to avoid damage to molding.

1" wide clips can easily be moved or

removed if artwork is rearranged or taken

down.

Drywall

Metal

Framing

"CHANNEL SCREED" REVEAL

Fry Reglet Reveal Channel Screed

provides an attractive break when used

horizontally in a straight or curved long

run of drywall. Can be used vertically

to add an attractive design element

in straight or curved walls. A wide

range of reveal widths from 1/2" to

6" permits a broad choice of design

effects. Available vented for use where

soffit ventilation is required.

Metal

Framing

Metal

Framing

"F" REVEAL

Fry Reglet “F” Reveal creates a wall

reveal transition between ceiling and

wall or (used vertically) between a wall

and other building material. Available

vented for use where soffit ventilation

is required.

Metal

Framing

Drywall

"T" MOLDING

Fry Reglet “T” Molding creates a reveal

at wall/ceiling intersection, provides

a clean edge for ceiling and finishes

ceiling edge with no need for taping

and spackling. Available vented where

air flow into ceiling plenum is desired.

Metal

Framing

Drywall

Drywall

"X" MOLDING

Fry Reglet “X” Molding serves as a

corner molding to accentuate right

angle termination of drywall. No taping

or spackling is needed since 3/16"

flanges conceal and finish edges.

Metal

Framing

Drywall

"W" MOLDING

Fry Reglet “W” Molding

provides a reveal at wall/ceiling

terminations. Available vented for air

flow between room and plenum. Also

provides support for many types of

ceiling systems. reveals.

Metal

Framing

Drywall


Drywall



Ceiling

Ceiling

Drywall

Ceiling

RESOURCE GUIDE - 2


CONTROL JOINT

Fry Reglet Control Joint is

used in long drywall runs to

prevent cracking of drywall joints

caused by minor settling in normal

building conditions. Continuous

compression seal prevents air and

dirt infiltration through joint. Forms

an attractive reveal consistent with

detailing offered by other Fry Reglet

moldings. The Fry Reglet Control Joint

allows for 3/16" of movement.

Metal

Framing

Tape&Jo in t Compound

CONTROL JOINTS

Drywall

"CORNER" TRIM

Fry Reglet Corner Trim is a heavy duty

corner trim used to finish and protect

outside corners in high traffic areas or

where walls are subject to more than

normal abuse.

Drywall

Metal

Framing

"L" TRIM

Fry Reglet “L” Trim Molding is

used as trim around raised or

recessed wall panels. A variety of

depths permits a wide choice of

variations in offsets and drywall

thicknesses.

Metal

Framing

"EDGE" TRIM

Fry Reglet Edge Trim is used with

multiple layers of drywall to provide

angled transition between finish layers.

Provides attractive trim for recessed or

raised panels.

Metal

Framing

Drywall

Drywall

"RADIUS CORNER" TRIM

Fry Reglet Radius Corner Trim is a

heavy duty radiused corner trim used

to finish and protect outside corners

in high traffic areas or where walls are

subject to more than normal abuse.

Metal

Framing"POCKET" TRIM

Fry Reglet Pocket Trim provides a

smooth, in-plane transition between

drywall ceiling and acoustical ceiling

without creating a reveal, and supports

acoustical ceiling system.

Metal

Framing

2 PIECE CONTROL JOINT 3 PIECE CONTROL JOINT

Metal

Framing

Metal

Framing

Metal

Framing

DrywallDrywallDrywall

Tape&Jo in t Compound

TRIMS




"EDGE" TRIM

Fry Reglet Edge Trim finishes edges

when multiple layers of drywall are used

to create recessed or raised panels in

a wall.

Metal

Framing

Floor

Drywall


1/2"Drywall

DrywallCeiling Tile

Resource Guide - 3


TRIMS

"J" MOLDING

Fry Reglet “J” Molding provides a

clean, attractive termination for drywall

or wood paneling. “J” section receives

wall finish and conceals edge with no

taping required.

Drywall

Metal

Framing

"END CLOSURE" MOLDING

Fry Reglet Drywall Molding End Closure

terminates a wall, partition or cased

opening. At wall top, may be screwed

into screw-slot grid to hold wall framing

in place.

Metal

Framing

"TOP TRACK"Fry Reglet Top Track finishes intersection

of wall or partition with a ceiling with a

clean reveal appearance. With a screw-

slot grid system, the top track can be

screwed into the ceiling to fasten wall

in place.Drywall

Metal

Framing

"CEILING TRIM"Fry Reglet Ceiling Trim provides a

reveal joint between walls and ceilings

and provides perimeter support for

drywall ceilings.

Metal

Framing

"Ceiling Trim"

Metal

Framing

"STEPPED OUTSIDE CORNER" Fry Reglet Stepped Outside Corner

forms an attractive stepped corner.

Cleanly finishes outside juncture

between walls allowing both walls to

be taped and spackled.

Metal

Framing

Drywall

"MULTIPLE STEPPED OUTSIDE CORNER"Fry Reglet Multiple Stepped Outside

Corner forms a multi-stepped outside

corner in either vertical or horizontal

intersection of drywall plane.

Metal

Framing

"BEVELED CORNER"Fry Reglet Beveled Corner is a

chamfered high-strength corner bead

used to finish and protect outside

corners of walls. Provides attractive

beveled detail. Can be used with

drywall of any thickness.

Metal

Framing

Drywall"CURVED INSIDE CORNER" Fry Reglet Curved Inside Corner is

a curved shape used to finish and

strengthen inside corners.

Metal

Framing

Drywall

Drywall


"Top Track"

Ceiling

Drywall

Drywall

Ceiling Ceiling


Drywall



Drywall

Drywall



Drywall


RESOURCE GUIDE - 4


TRIMS

"CURVED OUTSIDE CORNER"Fry Reglet Curved Outside Corner

is a curved section used to protect,

strengthen and finish outside corner of

wall intersection.

Drywall

Metal

Framing

"BULL NOSE"Fry Reglet Bullnose is a strong

custom aluminum shape used to

form a smooth radiused end cap

to attractively terminate walls and

to protect wall ends from impact

damage.

"Bull Nose"

Metal

Framing

"COLUMN COLLAR"Patented Fry Reglet Column Collar provides a functional, attractive trim creating

a reveal at column/ceiling joint. PVC spacer insures an attractive appearance and

no light leaks. Fabricated to fit specific column sizes. Tightens in place with a

turnbuckle and stainless steel metal band. Available with white or dark bronze

PVC spacer. Finish is clear anodized, painted or finished with a chemical conversion

coating for field painting.

"REVEAL COLUMN RING" (DRYWALL)Fry Reglet Reveal Column Ring

is carefully curved to fit column to

provide attractive, economical finish for

juncture of round column and drywall

ceiling. Available to form either a trim

or reveal joint. Available as one full

circle or two half circles.

GUIDE SPECIFICATION



Drywall

COLUMN COLLAR

PVC SPACER

ALUMINUM MOLDING

ADJUSTABLE BAND

DRYWALL

ACOUSTICAL/DRYWALL

PLASTER

COLUMN RING


Metal

Framing

DrywallMetal

Framing

"REVEAL COLUMN RING" (ACOUSTICAL - WDM)Fry Reglet Reveal Column Ring is

carefully curved to fit column to provide

attractive, economical finish for juncture

of round column and acoustical ceiling.

Available to form either a trim or reveal

joint. Available as one full circle or two

half circles.

AcousticalCeiling

Metal

Framing

Column

Column

"COLUMN RING DETAIL"

Resource Guide - 5


COLUMN RING

"WALL ANGLE COLUMN RING" (DRYWALL)Fry Reglet Wall Angle Column Ring


provide attractive, economical finish for

juncture of round column and drywall

ceiling. Available as one full circle or

two half circles.

Column

Metal

Framing

"W" REVEAL MOLDING

Fry Reglet “W” Reveal Molding is

used to form a reveal between wall

and suspended ceiling, creating a

crisp transition. Applications include

terminating a soffit from a vertical wall,

adding shadow highlights to ceiling/

wall interface, creating a crisp reveal

termination at top of a square column

and providing support for ceiling systems.

Available vented for room/plenum

air flow.

Drywall

Metal

Framing

"DRYWALL / ACOUSTICAL REVEAL"Fry Reglet Drywall/Acoustical Reveal

is used where an acoustical ceiling

meets a drywall ceiling. Provides a 1/2"

or 3/4" wide reveal separating the

two dissimilar materials, a support for

acoustical material and a taping flange

for finishing drywall.

Metal

Framing

"ACOUSTICAL CEILING TRIM" Fry Reglet Acoustical Ceiling Trim

provides a crisp finish between walls

and ceilings and provides perimeter

support for acoustical ceilings.

Metal

Framing

Drywall"ACOUSTICAL MOLDING"Fry Reglet Acoustical Molding creates

an attractive step or offset between

vertical drywall fascia and acoustical

ceiling. Provides support for acoustical

material."Acoustical

Molding"

Metal

Framing

"W" ACOUSTICAL REVEAL

Fry Reglet “W” Acoustical Reveal provides

a clean termination for installation of 7/8"

acoustical tile for glued-in acoustic ceiling

tile applications. Trim is installed with

appropriate fasteners at ceiling/wall joint.

Tile is then inserted into cavity and glued

to ceiling substrate.

Metal

Framing

Drywall

Drywall

Drywall

Drywall

"WALL ANGLE COLUMN RING" (ACOUSTICAL)Fry Reglet Wall Angle Column Ring


provide attractive, economical finish

for juncture of round column and

acoustical ceiling. Available as one full

circle or two half circles.

Column

AcousticalCeiling

ACOUSTICAL MOLDINGS

AcousticalCeiling Acoustical

Ceiling


AcousticalCeiling


AcousticalCeiling

AcousticalCeiling

"W" ACOUSTICAL REVEAL

Fry Reglet “W” Acoustical Reveal used

at soffit/ceiling joint to create a step and

provide a 1" lip for receiving a suspended

ceiling grid system and a glued-in fascia

tile.

Metal

Framing

Drywall

AcousticalCeiling

Glued-in

Fascia Tile

RESOURCE GUIDE - 6


"F" ACOUSTICAL REVEAL

Fry Reglet “F” Acoustical Reveal

provides a clean

termination for installation of 7/8"

acoustical tile for glued-in acoustic

ceiling applications and provides a

crisp reveal in the ceiling at wall/ceiling

joint. Trim is installed with appropriate

fasteners at wall/ceiling joint. Tile is

then inserted into cavity and glued to

ceiling substrate.Drywall

Metal

Framing

"SPECIAL SECTIONS"Fry Reglet Special Sections have been

developed to meet special condition

needs. They are included here should

similar needs occur in the future. Contact

Fry Reglet for further information.

CONTEMPORARY REVEAL

Fry Reglet Contemporary Reveal Molding

provides an attractive vertical or horizontal

recess in drywall that creates the illusion the

panels are “floating” in space.

Metal

Framing

Drywall

Drywall

"J" ACOUSTICAL REVEALFry Reglet “J” Acoustical Trim provides

a clean termination for installation of

7/8" acoustical tile in glued-in acoustic

ceiling applications. Trim is installed

with appropriate fasteners at ceiling/

wall joint. Tile is then inserted into

cavity and glued to ceiling substrate.

7/8"AcousticalTile

Drywall

7/8"AcousticalTile

Drywall

Metal

Framing

SPECIAL SECTIONS

2054 Special "J" Molding 1262 Special "J" Molding 1360 Special "J" Molding

1054 Special Reveal Molding 1270 "PRM" Molding

1858 Modified Channel Molding

CONTEMPORARY REVEAL Tape & Joint Compound

Resource Guide - 7

ACOUSTICAL MOLDINGS


GLAZING TRACK

"GLAZING TRACK"Fry Reglet Glazing Track creates an

opening for full height, chair rail and

clerestory glazing in drywall. Provides

a straight, even transition from

drywall to glass and minimizes field

labor. Glazing Track System includes

slotted head & base sections and solid

sections at sides of glazed openings.

Metal

Framing

"DRYWALL CEILING TRACK"Fry Reglet Drywall Ceiling Track creates

a clean, sharp opening in drywall for

glass installation.

Metal

Framing

"ACOUSTICAL CEILING TRACK"Fry Reglet Acoustical Ceiling Track

creates a clean, sharp opening in

Acoustical ceilings for glass installation.

"DRYWALL / ACOUSTICAL CEILING TRACK"Fry Reglet Drywall /Acoustical

Ceiling Track creates a clean, sharp

opening at the transitition of Drywall

to Acoustical ceilings for glass

installation.

Metal

Framing


Drywall

Drywall

Drywall

Drywall

AcousticalCeiling

AcousticalCeiling

"REVEAL RAIL"Fry Reglet Integrated Functional

Reveal Rail creates a Horizontal reveal

designed to accept a chartrail insert

and hook insert. Provides an aesthetic

reveal that is fully integrated into dry

wall.

INTEGRATED FUNCTIONAL REVEAL

"CHARTRAIL INSERT"Fry Reglet 2" Chartrail Insert to be

inserted into the Integrated Functional

Reveal Rail. Chartrail can be used

to hold markers or as a stand for

presentations or artwork.

"HOOK INSERT"Fry Reglet Hook Insert is designed

to be inserted into the Integrated

Functional Reveal Rail. Hooks can be

placed anywhere on the reveal as

needed, and repositioned for different

sized objects like artwork, photgraphy

or presentations.

RESOURCE GUIDE - 8

"DRYWALL MOLDING END CLOSURE"Fry Reglet Drywall Molding End Closure

creates a smooth, vertical surface at

each side of glazed openings. Metal

Framing

Drywall Drywall


REVEALS

Channel Screed

1/4" Channel Screed

“V” Reveal Molding

“F” Reveal Molding

“T” Reveal Molding

Plaster Key Reveal Molding

Reveal Molding

Column Collar

DRIP SCREEDS

Drip Screed

Stucco Drip Screed

Thin Stucco Drip Screed

5/8" Drip Screed

Drip Screed

Soffit Molding

“F” Drip Cap

Foundation Weep Screed

CONTROL JOINT

2-Piece Plaster Control Screed

CORNERS

“X” Corner Molding

Corner Key

VENEER PLASTER

Veneer Plaster Reveal Molding

Veneer Plaster “F” Reveal Molding

Veneer Plaster “Z” Reveal Molding

Contemporary Reveal Molding

Factory Fabricated Intersections

Finishes

PLASTER AND E.I.F.S. MOLDINGS

SOFFIT VENTS

Soffit Vent

Soffit Vent

5/8" Soffit Vent

Soffit Vent

Soffit Vent

Vented Soffit Molding

Soffit Vented E.I.F.S.

TRIMS

Fascia Corner Molding

“J” Molding

E.I.F.S. MATERIALS

E.I.F.S. Channel Screed

E.I.F.S. Soffit Vent

Cleanfinish E.I.F.S. Soffit Vent

E.I.F.S. Soffit Vent (Direct Applied)

E.I.F.S. Soffit Vent

E.I.F.S. Drip Screed

INTERSECTIONS / FINISHES

TABLE OF CONTENTS

Resource Guide - 9

"J" Channel

Inside Corner

Outside Corner

Vertical

Horizontal

Drip Cap

"T" Piece for Artisian Matrix Systems Only

FIBER CEMENT PANEL TRIMS

PAGE

1010101010101011

1111111111

111212

12

12121212131313

1313

PAGE

1313

141414141414

1515

1515

1617

18181818181818

TRIMS

"CHANNEL SCREED"Fry Reglet Channel Screed is a traditional

molding that gives architectural accents to

stucco walls and ceilings, available in a wide

selection of reveal dimensions. Provides

functional performance by establishing the

proper thickness of stucco and plaster. Can be

fabricated into custom intersections to meet a

variety of job conditions and curved to a wide

range of custom radius requirements. Used

in soffits, channel screeds can be vented to

provide soffit ventilation.

Metal

Framing

" 1/4" CHANNEL SCREED" Fry Reglet 1/4" Channel Screed provides

a sharply defined, attractive narrow reveal

to break the monotony of large, plastered

surfaces. Used also to introduce subtle trim

in soffits and on fascia. This is a very versatile

molding. It can be factory curved to specific

radius dimensions and fabricated for a variety

of conditions where horizontal and vertical

runs intersect.

Metal

Framing

"V" REVEAL MOLDING

Fry Reglet “V” Reveal Molding creates

a “V” shaped reveal in conventional lath

and plaster applications that emulates the

appearance of the vertical joint in pre-cast

or tilt-up panels. Can be used vertically

or horizontally and where new plaster

construction is installed adjacent to tilt-up

construction. Used to maintain panelized

appearance throughout the project.

Metal

Framing

"F" REVEAL MOLDING

Fry Reglet “F” Reveal Molding is used to

form a reveal where plaster terminates

against sill, soffit, jamb, window, ceiling

or other finish materials. Available vented

for air movement when used in soffit

applications. Can be radiused and fabricated

into intersections with many other, dissimilar

Fry Reglet profiles.Metal

Framing

"T" REVEAL MOLDING Fry Reglet “T” Reveal Molding is a versatile

interior or exterior molding which creates

a reveal at junction of dissimilar materials.

Neatly terminates junction of plaster and

stucco materials and can be vented when air

movement is required in soffits and ceilings.

Creates a decorative reveal while providing a

screed for plaster or stucco. By making a saw

cut on the vertical wall surface, the molding can

terminate a ceiling at irregular wall surfaces.

When walls are smooth, no saw cut is necessary.

Metal

Framing

"PLASTER KEY" REVEAL MOLDING

Fry Reglet Plaster Key Reveal Molding

provides attractive termination and reveal at

juncture of walls, plaster ceilings and soffits,

as well as at the top of square or round

columns. Can be vented when air movement

is required and custom radiused to a wide

range of curvatures. Available for round

columns as one full circle or two half circles.

"REVEAL MOLDING"Fry Reglet Reveal Molding provides attractive

termination and reveal at juncture of walls,

plaster ceilings and soffits, as well as at

the top of square or round columns. Can

be vented when air movement is required

and custom radiused to a wide range of

curvatures. For round columns, molding is

available as one full circle or two half circles.

Metal

Framing

Approved Sheathing

Saw CutOptional

Plaster or

Stucco

Plaster or

Stucco

Plaster or

Stucco

Plaster or

Stucco

Ceiling

Plaster or

Stucco

Approved Sheathing

Plaster or

StuccoWall or

ColumnPlaster

or Stucco

Approved Sheathing

Wall or

Column


REVEALS

RESOURCE GUIDE - 10

"V" REVEAL MOLDING

Fry Reglet “V” Reveal Molding creates a “V”

shaped reveal in conventional lath and plaster

applications that emulates the appearance of

the vertical joint in pre-cast or tilt-up panels.

Can be used vertically or horizontally and where

new plaster construction is installed adjacent

to tilt-up construction. Used to maintain

panelized appearance throughout the project.

Metal

Framing

Plaster or

Stucco

"COLUMN COLLAR" Patented Fry Reglet Column Collar provides

a functional, attractive trim creating a reveal

at column/ceiling joint. PVC spacer insures

an attractive appearance and no light leaks.

Fabricated to fit specific column sizes.

Tightens in place with a turnbuckle and

stainless steel metal band. Available with

white or dark bronze PVC spacer. Finish is

clear anodized, painted or finished with a

chemical conversion coating for field painting.


DRIP SCREEDS

"DRIP SCREED" Fry Reglet Drip Screed neatly joins soffit and

fascia while providing a drip joint to prevent

water stains on soffit and vertical wall of

building. Can be vented if air movement

is required. Accommodates a 7/8" plaster

fascia and soffit thickness of 7/8" or less

(by trimming vertical leg on soffit side of

molding).

Plaster or

Stucco

Stucco Soffit

Metal

Framing

" STUCCO DRIP SCREED" Fry Reglet Stucco Drip Screed neatly joins

soffit and fascia while providing a drip joint

to prevent water stains on soffit and wall of

building. Can be vented if air movement is

required.

StuccoFascia

Stucco Soffit

Metal

Framing

" THIN STUCCO DRIP SCREED" (DS 75-75)Fry Reglet Thin Stucco Drip Screed prevents

staining of 3/4" stucco soffit surfaces.

Provides an attractive reveal between fascia

and soffit. Available vented for ventilation of

areas above soffit.

StuccoFascia

Stucco Soffit

Metal

Framing

StuccoFascia

Stucco Soffit

Metal

Framing

" 5/8" DRIP SCREED"Fry Reglet 5/8" Drip Screed is a special

drip screed with 5/8" space dimension on

soffit side to support 5/8" soffit material.

Protects against soffit staining, finishes soffit/

fascia intersection and, with vents, allows air

movement above soffit.

StuccoFascia

5/8" Soffit

Metal

Framing

"DRIP SCREED"Fry Reglet Drip Screed neatly joins soffit and

fascia while providing a drip joint to prevent

water stains on soffit and vertical wall of

building. Can be vented if air movement




molding).

Plaster Soffit7/8" or lessAs Specified

Metal

Framing

3/8" Plaster Soffit

Resource Guide - 11

" SOFFIT MOLDING"Fry Reglet Soffit Molding

provides a reveal joint and screed

point in stucco soffits. With vents, it provides

a venting capability for soffits.

FasciaStucco

Metal

Framing

" THIN STUCCO DRIP SCREED" (DS 75-200/300)Fry Reglet Thin Stucco Drip Screed prevents

staining of 3/4" stucco soffit surfaces.

Provides an attractive reveal between fascia

and soffit. Available vented for ventilation of

areas above soffit.

TRIMS

"FOUNDATION WEEP SCREED"Fry Reglet Foundation Weep Screed

drains water from behind stucco panels at

foundation level to prevent water damage

to studs, sills or other parts of substructure.

Spring-tite flange assures positive contact

with foundation. Light gray rigid vinyl

will not stain, is rustproof and

is compatible with all metals. Foundation

Metal

Framing "SOFFIT VENT"Fry Reglet Soffit Vent functions as a drip

screed and provides ventilation to areas

above soffit. Separates soffit from fascia with

a reveal and adds a sharp uniform edge to

soffit/fascia joint.

Metal

Framing

Metal

Framing

"5/8" SOFFIT VENT" Fry Reglet 5/8" Soffit Vent functions as a

drip screed and vent for areas above soffit.

Features a 3/8" long bottom leg to support

5/8" soffit material.

Spring-TiteFlange


DRIP SCREEDS

"2-PIECE PLASTER CONTROL SCREED" Fry Reglet 2-Piece Plaster Control Screed is

used inside (plaster) or outside (stucco) to

prevent cracking. Separates wall sections

and allows minor independent movement of

sections on either side. Installed vertically or

horizontally, they provide an attractive reveal

consistent with the appearance of other Fry

Reglet moldings. Fry Reglet’s 2-Piece plaster

control screed allows for 3/16” of movement.

Stud

Plaster

Approved Sheathing

StuccoFascia

Stucco Soffit

Sealent(By Others)

StuccoFascia

Stucco Soffit

Approved Sheathing

"SOFFIT VENT"Fry Reglet Soffit Vent functions as a drip










Metal

Framing

StuccoFascia

Stucco Soffit

StuccoFascia

5/8"StuccoSoffit

Approved Sheathing

Metal

Framing






Metal

Framing

StuccoFascia

Stucco Soffit

RESOURCE GUIDE - 12

"F" DRIP CAP

Fry Reglet “F” Drip Cap creates a horizontal

reveal and provides an exterior drip cap over

top edges of doors and windows. A screed

point is provided for neatly stopping stucco

above reveal.

Dooror

WindowHeader

Metal

Framing

2-PIECE PLASTER CONTROL JOINT SOFFIT VENTS


SOFFIT VENTS

Stucco

" SOFFIT VENT E.I.F.S." Fry Reglet Soffit Vent E.l.F.S. functions as a

drip screed and provides ventilation to areas

above soffit.

"FASCIA CORNER" MOLDING

Fry Reglet Fascia Corner Molding can be

applied to fascia corner where an acoustical

ceiling joins the vertical surface of plaster,

stucco or drywall/veneer plaster systems.

Fascia

Acoustical Ceiling

Metal

Framing

"X" CORNER MOLDING

Fry Reglet “X” Corner Molding creates a

stepped edge at the right angle meeting of

plaster walls.

Plaster

Metal

Framing

"CORNER KEY"Fry Reglet Corner Key is a barely visible

corner plaster key that guarantees a clean,

crisp, reinforced plaster corner.Metal

Framing

"SOFFIT VENT"Fry Reglet Soffit Vent provides ventilation

to areas above soffit, forming an attractive

reveal.

Plaster Plaster

Metal

FramingApproved Sheathing

Metal

Framing "VENTED SOFFIT" MOLDING Fry Reglet Vented Soffit Molding provides

a reveal and venting capability for soffits

and a screed point for applying stucco. Can

be installed next to building exterior wall

or against the inside of the fascia framing

depending on choice of location of venting.

Exteior Building

Wall

Soffit Soffit Soffit

Soffit Soffit

TRIMS

Approved Sheathing

"J" MOLDING

Fry Reglet “J” Molding is a basic interior or

exterior trim used to terminate and finish

plaster, stucco, drywall or wood panels.

Plaster

Metal

Framing

Approved Sheathing

CORNERS

PlasterStucco

Stucco

Resource Guide - 13

TRIMS

"CLEANFINISH" E.I.F.S. SOFFIT VENT

Specially designed to be installed after

E.I.F.S. application is complete, Fry

Reglet’s CleanFinish soffit vent covers up

any finish imperfections with one clean,

straight strip.

CleanFinish vented molding is inserted and

held in place with appropriate fasteners

that screw through to the concealed

framing in the soffit.

As a result, CleanFinish soffit vents

save time and money, because there’s

no masking or clean up required, and

any surface imperfections are concealed

behind the soffit trim.

Extruded aluminum CleanFinish

vents are available with clear anodized or paint

finishes, and come in 2”, 3” and 4” widths.


E.I.F.S. MATERIALS

"DIRECT APPLIED" E.I.F.S. SOFFIT VENT Fry Reglet E.I.F.S. Soffit Vent Direct Applied

is sized for use with direct applied E.I.F.S.

substrated in soffits with an E.I.F.S. system.

Forms attractive reveal and provides air flow

into spaces above soffit.

"SOFFIT VENT" E.I.F.S.Fry Reglet E.I.F.S. Soffit Vent functions as a

drip screed and provides ventilation to areas

above soffit.

"DRIP SCREED" E.I.F.S. Fry Reglet E.I.F.S. Drip Screed neatly joins

soffit and fascia while providing a drip joint to

prevent water stains on soffit and vertical wall

of building. Can be vented if air movement




molding).

Metal

Framing

Fascia

E.I.F.S.

Board

Approved Sheathing

E.I.F.S.

Board

Soffit Soffit

E.I.F.S.

Board

"DRIP SCREED" E.I.F.S. Fry Reglet E.I.F.S. Drip Screed neatly joins

soffit and fascia while providing a drip joint to

prevent water stains on soffit and vertical wall

of building. Can be vented if air movement




molding).

Metal

Framing

Fascia

E.I.F.S.

Board

E.I.F.S.

Board

RESOURCE GUIDE - 14

" E.I.F.S. CHANNEL SCREED"Fry Reglet E.I.F.S. Channel Screed is a special

1/4" ground channel screed for creative

reveal details on exterior walls and soffits.

Sized for use with thin-coat stucco and

synthetic E.I.F.S. finishes when applied

over exterior hardboard materials. Can be

vented for soffit ventilation, radiused for

curved areas and fabricated into custom

intersections.

Metal

Framing

Finish

System

" E.I.F.S. SOFFIT VENT"Fry Reglet E.I.F.S. Soffit Vent is sized for

use in soffits with an E.I.F.S. system. Forms

attractive reveal and provides air flow into

spaces above soffit.

Metal

Framing

Finish

System


VENEER PLASTER

Metal

Framing

"VENEER PLASTER REVEAL MOLDING" Fry Reglet Veneer Plaster Reveal Molding

creates an attractive vertical or horizontal

recessed reveal in veneer plaster. Reveals

can become a design element to enhance

building interiors. Reveal widths from 3/8" to

3/4" for choice of design effects.depending

on choice of location of venting.Drywall

"CONTEMPORARY MOLDING"Fry Reglet Contemporary Reveal Molding pro-

vides an attractive vertical or horizontal recess

in veneer plaster that creates the illusion the

panels are “floating” in space.

Metal

Framing

VeneerPlaster

DESIGN BENEFITS OF VENEER PLASTER MOLDINGS

Veneer

Plaster

Metal

Framing

"VENEER PLASTER "F" REVEAL MOLDING" Fry Reglet Veneer Plaster “F” Reveal Molding

is used to form wall trim reveal where drywall

terminates against sill, jamb, ceiling or other

finish material in the same place. Supports

ceiling material.

Drywall

Veneer

Plaster

Ceiling

Metal

Framing

"VENEER PLASTER "Z" REVEAL MOLDING" Fry Reglet Veneer Plaster “Z” Reveal Molding

forms a trim reveal around doors and

windows or between walls and floors.

Drywall

DOOR JAMB,

WINDOW FRAME SILL,

ECT.

Veneer

PlasterDrywall

Resource Guide - 15

Sharper reveal edge so less metal is visible and

the reveal is clean and crisp.

Reveal edge that slopes away from

the taping flange to prevent cracking at the joint.

Taller reveal edge to provide

for 1/16" to 3/32" veneer

plaster thickness.

TRIMS


FACTORY FABRICATEDINTERSECTIONS

RESOURCE GUIDE - 16

INTERSECTIONS Fry Reglet leads the industry in the production of factory fabricated intersections

and corners. All Fry moldings and trims are heliarc welded for strength and

come in a number of standard configurations. Prefabricated intersections

reduce on-site hassles and save installation time on the job. Computer Aided Design (CAD)

allows Fry to build custom parts to precise specifications. Odd angles, oversize parts,

complex shapes and combination parts (comprised of two or more profiles) are all a

part of our service – if you can imagine it, our shop drawings and instructions assure it’s

built right.

Fry Reglet is able to curve virtually any shape in our assortment of drywall and plaster moldings. The only limitation to this process

is the size of the curve, measured in terms of the “radius”. Radius is the geometric term given to the distance from the center of a circle to its outside edge. The shape of the molding,

and the direction of the curve, determine the minimum curve that can be achieved. Contact your local distributor or Fry Reglet’s Customer Service Department for price quotations

and radius minimums for specific parts.

Fry Reglet’s curving process yields 9 usable feet of material from each 10 foot part. Provision for this 10% spoilage should be made when ordering.

CURVING FRY REGLET MOLDINGS


DRYWALL / PLASTERMOLDING FINISHES

Resource Guide - 17

POWDER PAINTFry Reglet Powder paint, applied over chemical conversion coating and primer, provides

durability and beauty for most interior and exterior applications. This finish is provided

as the standard Fry Reglet paint finish.

This factory applied, baked-on finish is available at standard lead times in custom colors

to match swatches provided.

ANODIZED FINISHESAnodizing is an electrochemical process in which the aluminum is

immersed in an acid solution through which electric current is passed. Although a

natural oxidation process commences when bare, unfinished aluminum is exposed to

air, producing the oxide film artificially produces film that is thicker, harder and more

durable.

CHEMICAL CONVERSION COAT FINISHESChemical conversion coating is a multi-step cleaning and metal preparation process. It

cleans the aluminum, and acts as a

protective coating until primer and paint can be applied. When

field painting is planned, chemical conversion coating should

be specified.

KYNAR® PREMIUM FINISHESThe industry standard for over 25 years, Fry Reglet Kynar® coatings provide

superior resistance to chalking and ultraviolet deterioration. Kynar® finishes

are highly resistant to chemicals, salt spray and industrial pollutants. This

premium finish is recommended for moldings to be used on exteriors in harsh

environments or in coastal areas where salt air is common. Available in the two

standard colors shown below or, on special order, in custom colors.

Kynar® is a registered trademark of ALTOFINA.

TRIMS


FIBER CEMENT PANEL TRIMS

RESOURCE GUIDE - 18

"INSIDE CORNER"Fry Reglet Inside Corner creates a square and

true termination point for HardiePanelTM siding

at an Inside Corner.

Metal

Framing"J-CHANNEL"Fry Reglet J - Channel is a termination trim

designed to cover the edge of HardiePanelTM

siding at intersections and at door and

window openings.

Metal

Framing

5/16"Hardie Panel™

Siding

Approved Sheathing

Approved Sheathing

5/16"HardiePanel™

Siding

"OUTSIDE CORNER"Fry Reglet Outside Corner creates a straight

and true, abuse resistant corner with exposed

flanges that cover the vertical ends of the

HardiePanelTM siding.

Metal

Framing

5/16"Hardie Panel™

Siding

Approved Sheathing

"VERTICAL MOLDING"Fry Reglet Vertical Molding creates

an attractive vertical reveal between

HardiePanelTM siding. The reveal becomes a

design element to enhance building Exteriors.

Metal

Framing

Approved Sheathing

5/16"HardiePanel™

Siding

"HORIZONTAL MOLDING"Fry Reglet Horizontal creates an attractive

reveal between horizontal ends of

HardiePanelTM siding. Profile shape channels

moisture out and away from sheathing and

water resistance barrier.

Metal

Framing

5/16"HardiePanel™

Siding

Approved Sheathing

"DRIP CAP"Fry Reglet "Drip Cap" creates an attractive

reveal between horizontal ends of Hardie

Panel™ siding and the tops of doors and

windows. Profile shape channels moisture out

and away from sheathing and water resistance

barrier.

5/16"HardiePanel™

Siding

1/2"

"T-PIECE"Fry Reglet T - piece provides a 1/2" express

/ reveal at horizontal joints in James Hardie

Artisan®

MatrixTM Panels.

NOTE: For Artisian Matrix System OnlyMetal

Framing

5/16"HardiePanel™

Siding

Approved Sheathing

C-25mm "T"head SS brad nail

C-25mm "T"head SS brad nail

1/2"

resource guide - amazon s3 · resource guide - 5. fry reglet corporation, 1-800-237-9773, column...

Documents