partners.skanska.com resource station/resources...detailed, grouped by each number submittal...

Detailed, Grouped by Each Number

Submittal Transmittal

Skanska USA Building Inc.Alley 111 Apartments Project # 4212049-000

Tel: Fax:

Date: 12/26/2013 Reference Number: 0023

Transmitted To: Transmitted By: Albert MartinKevin Reed

GGLO Skanska USA Building Inc.1301 First Avenue Suite 301Seattle, WA 98101Tel: (206) 467-5828

929 109th Ave NEBellevue, WA 98004

Submittal Package No Description Due Date Package ActionQty

1/9/2013Sanitary and Storm Product Data0008 - 221300 - 11

Transmitted For Delivered Via Tracking Number

EmailApproval

Notes Item ActionItems DescriptionQty

Contact Name Copies NotesCompany NameCc:

Remarks

Please see the attached resubmittal for your review.

Signature Signed Date

Prolog Manager Printed on: 12/26/2013 6WEST

Albert.Martin

Submittal Stamp

Albert.Martin

Text Box

221300-0008-1-HawkMech-Sanitary and Storm Product Data (Resubmittal)

Albert.Martin

Text Box

12/26/2013

Albert.Martin

Text Box

12/26/2013

Albert.Martin

Text Box

12/26/2013

kevinr

Submittal

kevinr

Typewritten Text

See Rushing review memo on following page. Resubmittal of the grease interceptor not required. Provide interceptor equipment and accessories per ASI 01. Record changes on record drawings. Submit confirming RFI to change manhole covers to gas-tight lids.

SUBMITTAL REVIEW COVERSHEET

Project Name: Alley 111 1725 Westlake Avenue N.

Date: 2014-01-09 Suite 300

Submittal No &

Description

Submittal #0008-221300-1 – Facility Sanitary and Storm

Water Systems

Seattle, WA 98109

206-285-7100

Submittal Date: 2013-12-06 (Original), 2013-12-26 (Resubmittal 1)

Submittal Status:

No Exception Taken (NET)

Exception Taken as Noted, Provide Revised Submittal for Project Records, No Add’l Rushing Review Req’d (ET)

Exception Taken as Noted, Revise and Resubmit as Noted for Rushing Review (ET-RR)

Revision History: Rev 1 Date: 2014-01-09 By: Steven Huff E-mail: [email protected]

Comments:

Status

0-1 General note: No exception taken with submitted products unless specifically noted

below. INFO

0-2

Cast iron fittings have been omitted from this submittal. Equipment cut sheets have only

been included for cast iron pipe and no-hub couplings. Provide cast iron fitting submittal

for review.

2013-12-26 Resubmittal: No-hub cast iron fittings have been included in the

resubmittal. No exception taken, item is closed.

ET-RR

NET

0-3

Victaulic Style 07 Rigid Coupling: No exception taken with submitted product for pumped

storm, foundation, and sanitary waste piping. Provide hot dipped galvanized to match

piping and use with EPDM gasket.

NET

0-4

Fittings for copper pipe have been omitted from this submittal. Equipment cut sheets

have only been included for Type L copper pipe and solder. Provide fitting submittal for

review.

2013-12-26 Resubmittal: Copper pipe fittings have been included in the resubmittal.

No exception taken, item is closed.

ET-RR

NET

0-5

Air Admittance Valves: Air admittance valves (AAV) are not allowed on this project per

plan review comments from the City of Bellevue Plumbing Inspector. AAV’s have been

removed from the plumbing drawings and are no longer required. Refer to Addenda B

drawings. No resubmittal required.

2013-12-26 Resubmittal: Air admittance valves have been removed from the submittal.

Item is closed.

ET

NET

0-6

General note: Contractor to submit formal substitution request for the products in the

following comments per project requirements if not already done.

2013-12-26 Resubmittal: Products are addressed individually below. Item is revised to

informational only.

ET-RR

INFO

Review is only for general conformance with the project design concepts and general compliance

with the information given in the contract documents. The contractor remains responsible for full

compliance with the contract drawings and specifications, confirmation of all project specific

dimensions, fabrication processes, techniques of construction, coordination of work with that of all

other trades, and the satisfactory performance of their work.


0-7

FCO: Josam model 55000 floor cleanouts have been submitted in lieu of specified

product by Jay R Smith Manufacturing. Rushing takes no exception to this substitution.

Owner to verify that substitution is acceptable. If not, provide product specified in

plumbing fixture schedule and provide revised product submittal if owner does not

accept substitution request.

2013-12-26 Resubmittal: Jay R Smith model 4020 floor cleanout has been submitted

per project schedules. No exception taken, item is closed.

ET

NET

0-8

FD-1 & 2: Josam model 30000-A floor drains have been submitted in lieu of specified

products by Zurn. Rushing takes no exception to this substitution.




2013-12-26 Resubmittal: Zurn model Z415B floor drain has been submitted per project

schedules. No exception taken, item is closed.

ET

NET

0-9

FD-3: Josam model 30000-A floor drain with added model F4 funnel has been submitted

in lieu of specified product by Zurn. Rushing takes no exception to this substitution.




2013-12-26 Resubmittal: Zurn model Z415I funnel floor drain has been submitted per

project schedules. No exception taken, item is closed.

ET

NET

0-10

FD-4: Josam model 32100-81 heavy duty floor drain with sediment bucket has been

submitted in lieu of specified product by Zurn. Rushing takes no exception to this

substitution. Provide with –TG option (Tractor grating)




2013-12-26 Resubmittal: Zurn model Z554 floor drain with sediment bucket has been

submitted per project schedules. No exception taken, item is closed.

ET

NET

0-11

GD-1: Josam model 32100-TG heavy duty garage drain has been submitted in lieu of

specified product by Jay R Smith Manufacturing. This product does not meet project

specifications, the submitted model does not include a sediment bucket as required in

the plumbing fixture schedule. Provide specified product.

2013-12-26 Resubmittal: Jay R Smith model 2110Y garage drain with sediment bucket

has been submitted per project schedules. No exception taken, item is closed.

ET-RR

NET


0-12

PD-1: Josam model 39600 planter drain has been submitted in lieu of specified product

by Zurn. Rushing takes no exception to this substitution.




2013-12-26 Resubmittal: Zurn model Z-352-75 planter drain has been submitted per

project schedules. No exception taken, item is closed.

ET

NET

0-13

AD-1: Josam model 22010 exterior area drain has been submitted in lieu of specified

product by Zurn. Rushing takes no exception to this substitution. Provide with deck

clamp assembly as specified.




2013-12-26 Resubmittal: Zurn model Z125 area drain has been submitted per project

schedules. No exception taken, item is closed.

ET

NET

0-14

Sand/Oil Interceptor: No exception taken with submitted Oldcastle model 660-SA

product. Contractor to provide interceptor with all modifications and other requirements

in accordance with City of Bellevue 2013 Sewer Engineering Standards and Engineering

detail S-29.

NET

0-15

Grease Interceptor:

No exception taken with grease interceptor brand, style (circular tank), or size. Provide

double wall tank per project specification section 221300, section 2.12C.

In addition, per discussions with the City of Bellevue and the owners (Skanska), please

provide the following modifications:

-Eliminate 24” manway extensions on top of the tank. Provide standard locking tank lids

at tank access openings in lieu of extensions.

-Provide OSHA compliant tank access ladder and platform, designed and provided by

grease interceptor manufacturer as part of the tank.

Skanska to review and confirm that the options noted above are correct.

2013-12-26 Resubmittal: Refer to ASI-01 for detailed grease interceptor requirements.

Interceptor: Delete tank detection system per owner direction. Coordinate catwalk

access ladder location with site conditions.

Manhole: Provide drain collar around manhole per plumbing details. Pending owner

approval, Rushing would take no exception to installing a gas-tight lid in lieu of the

collar drain. Refer to Rushing e-mail, dated 1/2/2014, for additional details.

ET-RR


0-16

Sump-1 – Garage Drainage: Submitted sump basin does not match the dimensions noted

on sheet P2.00 of the plumbing drawings and is not acceptable size. Provide sump basin

with outside diameter of approximately 7’-0”x4’-8”x7’-0” deep. Recommend Oldcastle

Utility Vault model 577-LA or equal.

Revise and resubmit.

2013-12-26 Resubmittal: Oldcastle model 577-LA sump basin has been included in the

revised submittal. No exception taken, item is closed.

ET-RR

NET

0-17 Sump-2 – Foundation Drainage Grit Basin: No exception taken. NET

0-18 Sump-3 – Foundation Drainage Pump Vault: No exception taken. NET

0-19 Sump-4 – Storm Sump: No exception taken. NET

2013-12-26 Resubmittal – New Comments:

1-1 General note: No exception taken with new submitted products unless specifically

noted below. INFO

1-2

C153 ductile iron pipe and mechanical joints have been submitted for underground 4”

pumped waste lines.

Ductile iron pipe is not allowed for underground drain, waste, and vent systems per the

2009 UPC table 7-1 and does not meet project specifications. Recommend the use of

PVC piping system. Cast iron piping is also allowable per the project materials matrix.

Both materials have been previously reviewed for underground waste piping on this

project – no resubmittal is required.

ET

END OF REVIEW

Section Sub-Section Tag Description Manufacturer Model # Approval Status Submitted Revision Returned

221300 2.1 B-1 - Sanitary Sewer UG: Fittings - Cast Iron AB&I No hub cast iron Resubmittal 12/27/2013 1

221300 2.1-E-1 - Pumped Sanitary Sewer UG: Pipe American Fastite C151 Ductile Iron Resubmittal 12/27/2013 1

221300 2.1-E-2 - Pumped Sanitary Sewer UG: Fittings Tyler C153 Compact DI Fitting w/ Mega lug Resubmittal 12/27/2013 1

221300 2.2 A-1 - Sanitary Sewer AG: Fittings - Cast Iron AB&I No hub cast iron Resubmittal 12/27/2013 1

221300 2.4 B-1 - Storm AG: Fittings - Cast Iron AB&I No hub cast iron Resubmittal 12/27/2013 1

221300 2.5 B-1 - Condensate Pipe: Fittings Nibco Wrought Copper Fittings Resubmittal 12/27/2013 1

221300 2.8 B - Air Admittance Valves, 2" and Smaller N/A Deleted - Not used on project Resubmittal 12/27/2013 1

221300 2.9-B FCO Floor Cleanouts Jay R Smith Model 4020 - Nickle Bronze Resubmittal 12/27/2013 1

221300 2.9-E WCO Wall Cleanout: Interior Finished Jay R Smith Model 4472 Resubmittal 12/27/2013 1

221300 2.10 A-1 RD-1 Roof Drains Jay R Smith Model 1800-Y Resubmittal 12/27/2013 1

221300 2.10 A-2 ORD-1 Roof Drains - Overflow Jay R Smith Model 1800-Y Resubmittal 12/27/2013 1

221300 2.10 A-3 RD-2 Roof Drains (Addendum B) Jay R Smith Model 1800-Y Resubmittal 12/27/2013 1

221300 2.10 A-4 ORD-2 Roof Drains - Overflow Jay R Smith Model 1800-Y Resubmittal 12/27/2013 1

221300 2.10 A-5 RD-3 Roof Drain (Addendum B) Jay R Smith Model 2005-Y-CI-UDC Resubmittal 12/27/2013 1

221300 2.10 A-6 EOD-1 Emergency Overflow Nozzle (Addendum B) Jay R Smith Model 1770-T- BS Resubmittal 12/27/2013 1

221300 2.10 B-1 FD-1 Floor Drain: Finished Area Zurn Model ZN-415-P Resubmittal 12/27/2013 1

221300 2.10 B-2 FD-2 Floor Drain: Mechanical Room Zurn Model ZN-415-P Resubmittal 12/27/2013 1

221300 2.10 B-3 FD-3 Floor Drain: Mechanical Room w/Funnel Zurn Model ZN-415-I-P Resubmittal 12/27/2013 1

221300 2.10 B-4 FD-4 Floor Drain: Trash Room w/ sediment bucket Zurn Model Z-554-P Resubmittal 12/27/2013 1

221300 2.10 C-1 GD-1 Garage Drain Smith Model 2110-Y-B Resubmittal 12/27/2013 1

221300 2.10 C-2 PD-1 Planter Drain Zurn Model ZRB-352-75-IP Resubmittal 12/27/2013 1

221300 2.10 C-3 AD-1 Area Drain Zurn Model Z-125-NH Resubmittal 12/27/2013 1

221300 2.12-A GI-1 Grease Interceptor Highlands Tank 2,500 Gal Double Wall w/ Platform Resubmittal 12/27/2013 1

221300 2.13-A-1 SUMP-1 Storm & Sanitary Sumps - Garage Drain Oldcastle Model 577 w/ 12" Ext Ring 57R12 Resubmittal 12/27/2013 1

Hawk Mechanical

12/26/2013

Submittal Log - Hawk Job #: 1651

Alley 111

Submittal Status


Project Name: Alley 111 1725 Westlake Avenue N.

Date: 2013-12-12 Suite 300

Submittal No &

Description

Submittal #0008-221300-0 – Facility Sanitary and Storm

Water Systems

Seattle, WA 98109

206-285-7100

Submittal Date: 2013-12-06

Submittal Status:

No Exception Taken (NET)

Exception Taken as Noted, Provide Revised Submittal for Project Records, No Add’l Rushing Review Req’d (ET)

Exception Taken as Noted, Revise and Resubmit as Noted for Rushing Review (ET-RR)

Revision History: Rev 0 Date: 2013-12-12 By: Steven Huff E-mail: [email protected]

Comments:

Status

0-1 General note: No exception taken with submitted products unless specifically noted

below. INFO

0-2

Cast iron fittings have been omitted from this submittal. Equipment cut sheets have only

been included for cast iron pipe and no-hub couplings. Provide cast iron fitting submittal

for review.

ET-RR

0-3

Victaulic Style 07 Rigid Coupling: No exception taken with submitted product for pumped

storm, foundation, and sanitary waste piping. Provide hot dipped galvanized to match

piping and use with EPDM gasket.

NET

0-4

Fittings for copper pipe have been omitted from this submittal. Equipment cut sheets

have only been included for Type L copper pipe and solder. Provide fitting submittal for

review.

ET-RR

0-5

Air Admittance Valves: Air admittance valves (AAV) are not allowed on this project per

plan review comments from the City of Bellevue Plumbing Inspector. AAV’s have been

removed from the plumbing drawings and are no longer required. Refer to Addenda B

drawings. No resubmittal required.

ET

0-6 General note: Contractor to submit formal substitution request for the products in the

following comments per project requirements if not already done. ET-RR

0-7

FCO: Josam model 55000 floor cleanouts have been submitted in lieu of specified

product by Jay R Smith Manufacturing. Rushing takes no exception to this substitution.




ET

0-8

FD-1 & 2: Josam model 30000-A floor drains have been submitted in lieu of specified

products by Zurn. Rushing takes no exception to this substitution.




ET

Review is only for general conformance with the project design concepts and general compliance

with the information given in the contract documents. The contractor remains responsible for full

compliance with the contract drawings and specifications, confirmation of all project specific

dimensions, fabrication processes, techniques of construction, coordination of work with that of all

other trades, and the satisfactory performance of their work.

sotis

Text Box

Resubmittal attached

sotis

Text Box

Noted & added submittal for 4"pumped waste

sotis

Text Box


sotis

Text Box

Resubmittal attached -Deleted from scope

sotis

Text Box

Products changed to specified Manufacture & Models

sotis

Text Box


sotis

Text Box



0-9

FD-3: Josam model 30000-A floor drain with added model F4 funnel has been submitted

in lieu of specified product by Zurn. Rushing takes no exception to this substitution.




ET

0-10

FD-4: Josam model 32100-81 heavy duty floor drain with sediment bucket has been

submitted in lieu of specified product by Zurn. Rushing takes no exception to this

substitution. Provide with –TG option (Tractor grating)




ET

0-11

GD-1: Josam model 32100-TG heavy duty garage drain has been submitted in lieu of

specified product by Jay R Smith Manufacturing. This product does not meet project

specifications, the submitted model does not include a sediment bucket as required in

the plumbing fixture schedule. Provide specified product.

ET-RR

0-12

PD-1: Josam model 39600 planter drain has been submitted in lieu of specified product

by Zurn. Rushing takes no exception to this substitution.




ET

0-13

AD-1: Josam model 22010 exterior area drain has been submitted in lieu of specified

product by Zurn. Rushing takes no exception to this substitution. Provide with deck

clamp assembly as specified.




ET

0-14

Sand/Oil Interceptor: No exception taken with submitted Oldcastle model 660-SA

product. Contractor to provide interceptor with all modifications and other requirements

in accordance with City of Bellevue 2013 Sewer Engineering Standards and Engineering

detail S-29.

NET

0-15

Grease Interceptor:

No exception taken with grease interceptor brand, style (circular tank), or size. Provide

double wall tank per project specification section 221300, section 2.12C.

In addition, per discussions with the City of Bellevue and the owners (Skanska), please

provide the following modifications:

-Eliminate 24” manway extensions on top of the tank. Provide standard locking tank lids

at tank access openings in lieu of extensions.

-Provide OSHA compliant tank access ladder and platform, designed and provided by

grease interceptor manufacturer as part of the tank.

Skanska to review and confirm that the options noted above are correct.

ET-RR

kevinr

Typewritten Text

GGLO note: Grease Interceptor revisions to be issued as part of ASI 01.

kevinr

Polygon

kevinr

Star 5

N

kevinr

Polygon

kevinr

Star 5

N

sotis

Text Box


sotis

Text Box


sotis

Text Box


sotis

Text Box


sotis

Text Box


sotis

Text Box

Noted

sotis

Text Box

Resubmittal attached (still pending ASI #01 when issued). Provide markups of desired options


0-16

Sump-1 – Garage Drainage: Submitted sump basin does not match the dimensions noted

on sheet P2.00 of the plumbing drawings and is not acceptable size. Provide sump basin

with outside diameter of approximately 7’-0”x4’-8”x7’-0” deep. Recommend Oldcastle

Utility Vault model 577-LA or equal.

Revise and resubmit.

ET-RR

0-17 Sump-2 – Foundation Drainage Grit Basin: No exception taken. NET

0-18 Sump-3 – Foundation Drainage Pump Vault: No exception taken. NET

0-19 Sump-4 – Storm Sump: No exception taken. NET

END OF REVIEW

sotis

Text Box


sotis

Text Box

Noted

sotis

Text Box

Noted

sotis

Text Box

Noted

1/4 BEND with low heel inlet

123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678NO-HUB FITTINGS SINCE

1906

4

1/4 BEND (90° Elbow)PART NO. SIZE D E WT

2347101431

1/4 BEND EXTENDED LOW HEEL INLET

8172

Part No. Size A D E Wt.

1/4 BEND TAPPED

2222

22-1/42-1/42-5/8

33-1/43-1/43-1/4

1-1/2 x 1-1/2"2 x 1-1/42 x1-1/ 2

2 x 2

0326033503300332

02800282

3 x 2"4 x 2

2-7/83-1/4

47

55-1/2

PART NO. SIZE D E WT

PART NO. SIZE D E WT

AB&I

AB&I

AB&I

AB&I

PART NO. SIZE D WT.

DOUBLE QUARTER BEND

2"34

4-1/25

5-1/2

46

10

402404406

0188019001920194019601980200

1-1/2"234568

PART NO. SIZE D WT.

049204940496049805000502

1-1/2"23456

9-1/49-1/2

1010-1/211-1/2

12

1/4 BEND LONG SWEEP(90° Extra Long Elbow)

458111719

AB&I

PART NO. SIZE D WT.

046204640468047004720474047604820485

1/4 BEND SHORT SWEEP(90° Long Elbow)

AB&I

4-1/44-1/2

55-1/26-1/2

78-1/2

3x2" 15-1/2 5 10-1/2 8

TO ORDER CALL TOLL FREE OAKLAND 1-800-GOT-IRON

PART NO. SIZE D E WT.

0604060606080610061206140616061706220625

1-1/2"234568101215

2-5/82-3/4

33-1/83-7/84-1/16

55-15/166-9/167-3/16

12357920333979

1/8 BEND

AB&I

1/6 BEND(60° Elbow)

057005720574


3-1/43-1/2

3-13/16

2"34

246

AB&I

1/5 BEND(72° Elbow)

053605380540

2"34

3-11/164-1/164-7/16

245

PART NO. SIZE D WT.

AB&I

PART NO. SIZE D WT.

0425 2x18 18

1/4 BEND EXTENDED

2

AB&I

4691217326878142

2"34568101215

6-1/27

7-1/28-1/2

910-1/2

1213-1/414-3/4

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.1B-1, 2.2A-1, 2.4B1 Cast Iron Fittings

123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678NO-HUB FITTINGS

5


4-1/44-1/44-1/24-1/44-1/2

54-1/2

55-1/2

55-1/2

66-1/2

567

5-1/26-1/27-1/26-1/2

67

8-1/2

08060808081008120814081608180820082208240826082808300832083408360838084008420843084408480850

1-1/2"2x1-1/2

23x1-1/2

3x23

4x24x34

5x25x35x45

6x26x46

6x36x58x68x48x38x58

Part No. Size D E F Wt

4-1/44-1/24-1/2

555

5-1/25-1/25-1/26-1/2

66

6-1/26-1/26-1/2

76-1/2

78

7-1/27-1/2

88-1/2

6-1/26-5/86-7/86-1/26-7/8

86-7/8

89-1/88-1/29-5/1610-7/1611-7/168-3/8

10-1/1612-1/29-1/811-1/213-1/211-1/210-3/811-9/1614-9/16

234444778910121610141510142418182228

AB&I

SANITARY TEE

Part No. Size D Wt.

0676067806800682068406860688

1-1/2"234568

2-1/82-1/82-1/42-5/162-7/8

33-3/4

11236613

AB&I

1/16 BEND(22-1/2˚ elbow)

1/8 BEND EXTENDED

063606380643

2x6"2x122x18

32-3/42-3/4

266


61218

AB&I

2588192436

TEST TEELess Plug

AB&I

6-3/87-3/48-7/88-7/811-1/212-1/215-1/4

Part No. Size E F D IPS Tap Wt.

2046204820508278205220542056

2"344568

3-3/163-7/84-7/164-7/165-3/46-1/47-5/8

22-11/16

33

4-1/256

2"3

3-1/24568

Part No. Size D F G Wt.

66-5/86-5/8

86-5/8

89-1/28-1/169-11/1611-3/1612-5/88-5/169-3/4

11-3/1612-1/214-1/168-1/29-5/1611-7/1612-13/1614-3/1617-1/812-5/815-7/1618-3/821-1/225-1/2

30

1312131413161318132013221324132613281330133213341336133813401342134413461348135013521354136213641365136613721375

1-1/2"2

3x23

4x24x34

5x25x35x45

6x26x36x46x56

8x28x38x48x58x68

10x410x610x8101215

44-5/85-5/165-3/4

66-1/27-1/167-1/2

88-1/29-1/28-1/48-3/49-1/410-1/410-3/49-3/8

9-13/1610-3/811-3/8

11-13/1613-3/8

11-11/1613-1/8

14-11/1616-1/219-3/423-1/4

22456711710121510121616211318212634403748577699183

WYE(45˚)

AB&I

22

1-1/22-1/4

11-11/162-7/1615/16

1-11/162-7/163-1/81/2

1-1/41-15/162-9/163-5/169/161/8

15/161-5/8

2-15/163-3/43/4

2-3/163-5/85-1/165-3/46-3/4

AB&I

Part No. Size D E F Wt.

5-11/165-11/165-11/16

6-3/85-11/166-3/8

85-11/166-3/8

233344855

1-1/2x1-1/2"2x1-1/42x1-1/2

2x23x1-1/2

3x23x3

4x1-1/24x2

121012121214121612201222122312261228

3-1/43-1/43-1/43-3/43-1/43-3/44-7/83-1/43-3/4

2-9/162-13/162-13/163-1/163-5/163-9/164-3/16

3-13/164-1/16

SANITARY TAP TEE

SANITARY TEEwith 2" Side Opening on Center


6699

3" LH3 RH4 LH4 RH

0986097609820992

55

5-1/25-1/2

4-7/164-7/164-15/164-15/16

88

9-1/89-1/8

SANITARY TEEwith 2" 45° Side Opening Above Center


66

3" LH3 RH

09750985

66

55

8-1/28-1/2

sotis

Text Box


123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678NO-HUB FITTINGS

6

SINCE1906


SANITARY CROSS

18501852185418561858186018621864

1-1/2"2

3x23

4x24x34

6x4

4-1/44-1/24-1/2

54-1/2

55-1/2

6

4-1/44-1/2

55

5-1/25-1/25-1/26-1/2

6-1/26-7/86-7/8

86-7/8

89-1/8

10-1/16

345778

1013

AB&I

DOUBLE COMBINATION WYEAND 1/8 BEND

Part No.Size D E F G Wt.

180218041806180818101812

2"3x23

4x24x34

5-3/85-1/27-5/165-1/27-1/49-1/4

6-1/86-3/4

87-1/48-1/2

10

6-5/86-5/8

86-5/8

89-1/2

66

128

1220

AB&I

COMBINATION WYE AND 1/8 BEND(60°)

Part No. Size D E F G Wt.

16941696169817001702170417061708171017121714171617181720172217241726172817321734

1-1/2"2x1-1/2

23x23

4x24x34

5x25x35x45

6x26x36x46x56

8x48x68

4-3/45

5-3/85-1/2

7-5/165-1/27-1/49-1/4

5-15/167-3/49-3/411-3/4

67-13/16

9-3/411-11/1613-5/89-7/16

1214-3/4

5-3/85-7/86-1/86-3/4

87-1/48-1/2

107-3/4

910-1/212-1/28-1/49-1/2

1113

14-3/811-5/1613-3/815-9/16

66

6-5/86-5/8

86-5/8

89-1/2

8-1/169-11/1611-3/1612-5/88-5/169-3/4

11-3/1612-1/214-1/1611-3/1613-15/16

16-15/16

2346778

159

1117239

12172333263854

AB&I


SANITARY TAP CROSS

2016201820242030

AB&I

3-1/43-3/43-3/43-3/4

2-13/163-1/163-9/164-1/16

5-11/166-3/86-3/86-3/8

2x1-1/2"2x23x24x2

4457

Part No. Size F IPS Wt.TAPPED ADAPTER

223822422244

1-1/2"2x1-1/2

2

2-5/82-3/162-5/8

112

1-1/21-1/2

2

HUB ADAPTERPart No. Size X Wt.

222222242226

2"34

4-1/24-3/45-1/4

235


222

1-1/22-1/4

11-11/162-7/1615/16

1-11/162-7/163-1/81/2

1-1/41-15/162-9/163-5/16

7/82-1/43-3/4

21-1/22-1/4

11-11/162-7/16

5677912

Part No. Size E H G F Wt.

UPRIGHT WYE(45˚)

77

8-3/87

8-3/89-3/4

2"3x23

4x24x34

AB&I

8-1/48-3/168-7/168-1/48-7/169-1/8

21-1/22-3/16

11-11/162-7/16

5-1/25-1/25-1/25-1/25-1/2

6

164616481650165216541656

DOUBLE WYE(45˚)

AB&I

Part No. Size D F G Wt.

6-5/86-5/8

86-5/8

89-1/2

11-3/1614-1/617-1/8

153815401542154415461548155215541556

2"3x23

4x24x34

6x468

4-5/85-5/165-3/4

66-1/2

7-1/169-1/4

10-3/413-3/8

21-1/22-1/4

11-11/162-7/161-15/163-5/163-3/4

4466811162350

Part No. Size Description Wt.

PRISON FITTINGwith Top Vent and 2" Opt. Tap "A"

304" Standard starter for prisonsand correctional construction.Double 90˚ with single 2" topvent (9-502-A). Fully baffled.

9112

AB&I

AB&I

C G F

5-1/4 7-3/4 11-3/4

sotis

Text Box


Part No. Descript. A Wt.

Part No. Size Wt.

123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678NO-HUB FITTINGS

7

REDUCER (Short)Part No. Size F Wt.

AB&I

213821402142214421482150215221542156215821602162216421662168217221742175218421862188219022042206220822102212

3-5/83-5/83-5/83-5/8

44444

4-1/24-1/24-1/24-1/2

55

5-1/266

6-1/26-1/2

77-12

777

7-1/27-3/4

112244444588788

141514202021253235343936

2x1-1/2"3x24x24x35x35x46x26x36x46x58x28x38x48x58x6

10x410x610x812x412x612x812x1015x415x615x815x1015x12

RUNNING TRAP"(with 4" single vent)


2570 4x4" 156-1/2 4-1/2 10-1/2 20

AB&I

"P" TRAP

25062508251025122514

1-1/2"2346

6-3/47-1/2

910-1/2

14

3-1/24

5-1/26-1/27-1/2

Part No. Size D J Wt.

AB&I

3381233

BLIND PLUG CLEANOUT FITTING

2480248224842486248824902492249424962498

1-1/2"234568101215

1-3/41-3/41-3/41-3/41-3/41-3/42-1/4

33-1/23-1/2

1112236121833

Part No. Size F Wt.

AB

&I

2" VENT BYPASSRight or Left Hand Inlet

9500950295229524

9-4739-473-A9-473-B9-473-A/B

----

TUB WYE

14121414

2" (9-474)2" (9-484)

87

Part No. Size D J M Tap Wt.

"P" TRAP (with 1/2" Tap Primer)

2"34

7-1/29

10-1/2

45-1/26-1/2

222

1/21/21/2

AB&I

853085328534

DEEP SEAL "P" TRAP

2"34

260026102567

7-1/29

10-1/2

778

61317


AB&I

P" TRAP (with tapped inlet)


258225862588

1-1/2"2x1-1/2

2"

6-3/47-1/27-1/2

3-1/244

345

AB&I

Part No. Size Wt.SIDE INLET "P" TRAP

26022604

2" x 1-1/2" LH2 x 1-1/2" RH

66

51014


10111111

sotis

Text Box


123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678NO-HUB FITTINGS

8

SINCE1906

AB&I

TWO WAY CLEANOUT FITTING (Kelly)

844284448446

3x3x4"4x3x44x4x4

7-1/29-3/169-3/16

Part No. Size E D F Wt.

152422

1519-1/218-3/8

99-1/29-1/2

IRONBODY CLEANOUT (Tapped)Part No. Size Tap A B C Wt.

12568

85648566856885708572

3"4568

2-1/23-1/2

456

2-3/162-3/164-1/24-1/23-1/4

3-3/84-7/165-5/165-5/168-3/8

3/43/4111

Part No. Size D J Wt."P" TRAP (Reducing)

8548 3x2" 9 5-1/2 10

AB&I

Part No. Size Wt.

1114161618192423

AB&I

VARIABLE

VARIABLE

29042908291229242932293629462950

CLOSET BENDS

4x6x12"4x6x154x6x184x10x124x10x154x10x184x12x184x16x16

AB&I

Visit Us On the Web

at www.abifoundry.com

3x4x6x12"3x4x6x153x4x6x18

3x4x10x123x4x10x153x4x10x183x4x16x16

8101314151619

2832284028442852286028642870

CLOSET BENDS(Reducing)

Part No. Size Wt.

VARIABLE

VARIABLE

TWIN CLEANOUT(East Bay Code)

2990

Part No. Size F E Wt.

4x4x4" 7-1/2 7-1/2 15

AB&I

3004


4x4x4"

TEXAS TWIN CLEANOUT

8-1/4 2-3/4 12 6-1/2 22

AB&I

sotis

Text Box


9

8100810281048106

3x2" - right3x2 - left4x2 - left4x2 - right

7-9/167-9/16

99

5-1/165-1/166-1/26-1/2

11111313

12101818

FIGURE 6 RIGHT/LEFTPart No. Size D E F Wt.

AB&I

FIGURE 5 EXTENDEDPart No. Size D E F Wt.

8088 3x2x3" 8-7/8 6-9/16 16-7/8 14

AB&I

FIGURE 5Part No. Size D E F G Wt.

80528054805680588062

2"3x2x3

34x2x4

4

6-1/28-7/88-7/810-1/410-1/4

56-9/166-9/167-3/47-3/4

89-1/410-1/811-1/2

12

711111717

AB&I

FIGURE 8 RIGHT/LEFTPart No. Size C D E F H Wt.

8136813881408142

3x2" - right3x2 - left4x2 - right4x2 - left

7-9/167-9/16

99

5-1/165-1/166-1/26-1/2

11111313

3-7/163-7/16

44

12122121

FIGURE 8 DOUBLE W/ FULL BAFFLE

8159 7-9/16 3-7/16 13115-1/163x2"

Part No. Size D E F C H Wt.

AB&I

FIGURE 8 EXTENDED RIGHT/LEFTPart No. Size H D E F C Wt.

81608162

4x2" - right4x2 - left

99

6-1/26-1/2

1313

4-1/24-1/2

2121

FIGURE 6 DOUBLE EXTENDEDwith FULL BAFFLE

Part No. Size C D E F Wt.

8129 4x2" 179 274-1/2 6-1/2

FIGURE 1Part No. Size D E F G Wt.

8002 2x2x1-1/2x1-1/2" 4-7/8 3-3/16 7 4

AB&I

AB&I

8163 4x2" 23136-1/298

Part No. Size H D E F C Wt.

FIGURE 6 DOUBLE W/FULL BAFFLE

81278112


3x2"4x2

7-9/169

5-1/166-1/2

1113

1323

AB&I

FIGURE 6 EXT. RIGHT/LEFT

Part No. Size A D E F X Wt.

8120812281248126

3x2" - left3x2 - right4x2 - left4x2 - right

7-9/167-9/16

99

5-1/165-1/166-1/26-1/2

17171717

18172026

AB&I

Right Shown

Left Shown

Right Shown

Left Shown


1-1/2

1-13/1622

1-15/161-15/16

4-1/84-1/84-1/24-1/2

4-1/8

88

4-1/2

AB&I

AB&I

FIG 8 DOUBLE EXTENDED FULL BAFFLE

123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678FIGURE FITTINGS

sotis

Text Box


123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678

CLOSET RINGS

CLOSET RINGS(No-Hub)

Used with no-hub coupling

Part No. Size A B F Wt.

29662970

4x3"4x4

44

34

3-1/24

45

022848022855008003008013022879022886008005022930022909008017008015008018

6-1/46-1/46-1/46-1/86-1/46-1/46-1/46-1/86-1/46-1/4

66-1/4

7-1/47-1/47-1/47-1/47-1/47-1/47-1/47-1/47-1/47-1/4

77-1/4

5/82

222234556624

12

11-1/2

22

2-1/23445624

Part No. Size x Height A B C D E Wt.

4x1" 4x1-1/2 4x2*4x2 4x2-1/2 4x3 4x4*4x4 4x5 4x6 4x2, 1" Offset 4x4, 2" Offset

*Portland Code, two 1/4" taps on top.

Part No. Size Box Qty Wt.

80208021802280238024

BEST-SET™CLOSET RING

12128812

4x2" (with test cap)4x24x44x4 (with test cap)4X3 Reducing w/testcap

55665

IAPMO No. 3209

Need a Smaller-Sized Catalog to Fit Your Pocket?

Call 800-GOT-IRON and Ask for Your Free AB&I Pocket Catalog

10

sotis

Text Box


2-6

AMERICAN Fastite Joint Pipe in sizes 4”-64” for water, sewage or other liquids has theproven long-life and high-strength qualitiesinherent in pipe produced centrifugally inaccordance with AWWA C151. In addition,this significant AMERICAN development, adependable, single gasket, push-on type jointmeeting the requirements of AWWA C111,affords the customer lower joint cost andtime-saving advantages in installation. It pro-vides exceptional strength and flexibility andhas been widely accepted by engineers, con-tractors and utility officials since the 1950s. Foradded flexibility during construction, and forpossible elimination of bends, a liberal 5°allowable deflection is standard in all sizesthrough 30”, offering 21” offset in a 20’length of pipe. Liberal deflection can also beprovided in larger diameter pipe with standardand Special Fastite Deflection Bells.

The patented AMERICAN Fastite Jointembodies many advanced design features andis rated for a water working pressure of 350 psi.For specific conditions, ductile iron piping withthis joint has been approved for much higherpressure conditions. The socket, which is scien-tifically designed with two gasket recesses and adividing buttress, is manufactured to close toler-ances so that the gasket is self-centered, securelyconfined, and firmly compressed for a perma-nent, tight, trouble-free joint. The Fastite jointseal, bubble-tight under vacuum and externalpressure, becomes even tighter with the appli-cation of internal pressure due to a speciallydesigned wedging surface in the socket.

Fastite Joint AssemblyThe bell opening is slightly tapered to

provide easy entry of the pipe end; the flaredsocket design permits liberal joint deflection.

The plain end of the pipe is tapered or roundedto facilitate entry into the bell and self-centeringin the gasket. On pipe cut in the field, theplain end can be easily beveled and smoothedby the use of a portable grinding wheel orother suitable apparatus. Methods of cuttingductile iron pipe are described in Section 3.

A stripe is painted on the plain end ofAMERICAN Fastite Joint Pipe to provide avisual means of checking the joint alignmentand to assure proper insertion. See page 2-10for detailed assembly instructions.

Fastite GasketThe Fastite Joint sealing component—a

molded synthetic rubber ring gasket of twohardnesses, shaped to fit the configuration ofthe gasket socket—is manufactured per allrequirements of ANSI/AWWA C111/A21.11and under AMERICAN’s own rigid specifica-tions, assuring closely controlled dimensionaland hardness properties. The smaller end ofthe gasket is of harder rubber, approximately85 durometer hardness, which provides astrong shoulder for self-centering on the gas-ket buttress, a permanent seal against coldflow, and protection from deterioration. Thelarger end of the gasket is of softer rubber,approximately 65 durometer hardness, provid-ing ease of assembly and positive sealing. Thedesign assures effective sealing at low or highpressures and in straight or deflected jointalignment. It also eliminates any concerns ofinfiltration or root intrusion, and assures posi-tive sealing against negative pressure, thuspreventing gasket “pullout” should a vacuumbe created in the line.

A taper on the inside of the gasket allowsthe entering pipe to locate and center on thehard section and reduces friction loads during

AMERICAN Fastite® Joint PipeFor Water, Sewage or Other Liquids

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.4-E-1 Pumped Waste Lines - Underground

2-7

subsequent assembly. The snug fit and thehard section of the gasket, in conjunction withthe design of the buttress, act to restrain thegasket against dislodgment during assembly.Additional internal pressure results in increasedtightness of the seal when pipe is either instraight alignment or deflected.

Gaskets made of SBR (Styrene ButadieneRubber) are standard. For information on gas-kets made of special types of rubber, forapplications involving air or liquid tempera-tures in excess of 150°F, or for chemical,hydrocarbon or other special service applica-tions, and for installations in contaminatedsoils where permeation through gaskets mightbe a concern, consult AMERICAN for recom-mendations. See Table 2-1.

Fastite LubricantAMERICAN Fastite Joint Lubricant is a

non-toxic water soluble material imparting nei-ther taste nor odor to the conveyed water and isANSI/NSF 61 approved. The lubricant is suitablefor use in hot or cold weather and will adhere towet or dry pipe. AMERICAN Fastite Joint Pipe

can be assembled when submerged, though forsuch installation, special AMERICAN underwaterjoint lubricant is recommended. See Table No.2-5 for appropriate lubricant quantities.

Fastite Joint MaterialsStandard joint materials include Fastite

plain rubber gaskets and a sufficient supply ofFastite joint lubricant. Fastite pipes are mostoften readily joined with available excavatingequipment; however, assembly tools can besupplied by AMERICAN on a loan basis with anominal deposit which is refundable uponreturn of tools in good condition.

FittingsAMERICAN Fastite or Flex-Ring fittings and

AMERICAN Mechanical Joint Fittings are usedwith Fastite Joint pipe. See Sections 4 and 5.

Coating and LiningAMERICAN Fastite Joint Pipe can be fur-

nished asphaltic coated, cement lined, or withspecial coating or lining where required. SeeSection 11.

Fastite Gaskets

Plain Rubber Styrene Butadiene 150°F 150°F Fresh Water, Salt Water, Copolymer(SBR) Sanitary Sewage

Plain Rubber Styrene Butadiene 150°F 150°F Electrical continuity for thawing(conductive) Copolymer(SBR) of Service Water and Sewage

EPDM Ethylene Propylene 212°F 200°F Water, Sewage, Ketones, Diene Monomer Dilute Acids and Alkalies,

Vegetable Oil, Alcohols, Air

Neoprene Polychloroprene(CR) 200°F 180°F Fresh Water, Sewage

Nitrile Acrylonitrile 150°F 150°F Non-Aromatic Hydrocarbons,Buna-N Butadiene(NBR) Petroleum Oil, Hydraulic Fluids,

Fuel Oil, Fats, Oil, Grease†

Fluoroelastomer FKM 212°F 300°F Aromatic Hydrocarbons, Gasoline,Fluorel Refined Petroleum Products, mostViton®*** Chemicals and Solvents, High Temp.,

Air (Least permeable of all available Fastite gasket rubbers)

Table No. 2-1

Common Nameor Trade Name* Chemical Name

Maximum ServiceTemperature**

Water & Sewer AirCommon Uses

*AMERICAN reserves the right to furnish any Trade or Brand rubber for the chemical formulation specified.**Temperature is in reference to conveyed fluid. Lubricating oil in air can adversely affect SBR and EPDM performance.SBR, Nitrile and Neoprene are not recommended for hot air exposure in wastewater treatment systems.***Viton® is a registered trademark of DuPont Dow Elastomers.Refer to Section 11 for temperature and service capabilities of pipe linings.Refer higher temperatures or other special requirements to AMERICAN for recommendations regarding suitable gasket material.†This gasket rubber is chemically resistant in the non-potable water uses shown but is not as resistant to permeation in potablewater applications as FKM.All Fastite gaskets made from the materials in the above table are suitable for use with water containing normal concentrations ofchloramine. Where increased resistance to chloramine is desired, neoprene or fluoroelastomer materials should be considered.

sotis

Cloud

sotis

Text Box


2-8

*Dimensions subject to change at our option. Check AMERICAN if exact dimensions required.See Section 3 for additional information on ductile iron pipe.See Sections 4 and 7 for information on Fastite fittings.

AMERICAN Fastite® Jointfor Ductile Iron PipeANSI/AWWA C111/A21.11

Standard Dimensions

LAYING LENGTHD

F* A

Table No. 2-2

16 20 6.90 3.38 8.6018 20 9.05 3.75 11.1610 20 11.10 3.75 13.2512 20 13.20 3.75 15.2214 20 15.30 5.23 17.7316 20 17.40 5.23 19.8618 20 19.50 5.50 22.16

24 20 25.80 5.50 28.5030 20 32.00 6.50 34.9536 20 38.30 6.50 41.3742 20 44.50 7.50 48.2748 20 50.80 8.00 54.7154 20 57.56 8.50 61.6560 20 61.61 8.75 65.8064 20 65.67 9.00 70.04

Sizein.

NominalLaying Length

ft. AOutside Diameter

DDepth of Socket

F*Bell O.D.

Dimensions in Inches

14 18 4.80 3.31 6.40

20 20 21.60 5.50 24.28

sotis

Text Box


TylerUtilitiesDivision•11910CR492•Tyler,Texas75706•(800)527-847802/01/08 UnionFoundryCompany•Box309•Anniston,Alabama36202•(800)226-7601 1

SAMPLE SPECIFICATIONSMechanicalJointwatermainfittingswithaccessories,3"through48"shallbemanufacturedfromDuctileIroninaccordancewithandmeetallapplicabletermsandprovisionsofstandardsANSI/AWWAC153/A21.53ANSI/AWWAC111/A21.11(currentrevisions).DuctileIronMechanicalJointFittings3"through24"shallberatedfor350PSIworkingpressure.30"through48"shallberatedfor250psiworkingpressure.Flangedductile-ironfittingsin24-in.(610mm)andsmallersizesmayberatedfor350psi(2,413kPa)withtheuseofspecialgaskets.AllcoatedfittingsmeetrequirementsofNSF-61.

NOTE-EXCEPTIONS:MechanicalJointFittingswithflangedbranchesareratedforwaterpressureof250PSI.

NOTE:FittingsareCEMENTLINEDandsealcoatedinaccordancewithANSI/AWWAC104/A21.4;alsoavailabledoublecement-lined,bareorepoxycoated.

MECHANICAL JOINT C153 DUCTILE IRONCOMPACT FITTINGS

Sizes3"thru12"ULListedForFireMainEquipment

JOINT DIMENSIONS IN INCHES BOLTS

Size ADia. B CDia. DDia. FDia. JDia. K1Dia. K2Dia. L M S T X Size No.

3 3.96 2.50 4.84 4.94 4.06 6.19 7.62 7.69 .58 .62 .39 .33 ¾ Áx3 4

4 4.80 2.50 5.92 6.02 4.90 7.50 9.06 9.12 .60 .75 .39 .34 Â ¾x3½ 4

6 6.90 2.50 8.02 8.12 7.00 9.50 11.06 11.12 .63 .88 .43 .36 Â ¾x3½ 6

8 9.05 2.50 10.17 10.27 9.15 11.75 13.31 13.37 .66 1.00 .45 .38 Â ¾x3½ 6

10 11.10 2.50 12.22 12.34 11.20 14.00 15.62 15.62 .70 1.00 .47 .40 Â ¾x3½ 8

12 13.20 2.50 14.32 14.44 13.30 16.25 17.88 17.88 .73 1.00 .49 .42 Â ¾x3½ 8

14 15.30 3.50 16.40 16.54 15.44 18.75 20.31 20.25 .79 1.25 .56 .47 Â ¾x4 10

16 17.40 3.50 18.50 18.64 17.54 21.00 22.56 22.50 .85 1.31 .57 .50 Â ¾x4 12

18 19.50 3.50 20.60 20.74 19.64 23.25 24.83 24.75 1.00 1.38 .68 .54 Â ¾x4 12

20 21.60 3.50 22.70 22.84 21.74 25.50 27.08 27.00 1.02 1.44 .69 .57 Â ¾x4 14

24 25.80 3.50 26.90 27.04 25.94 30.00 31.58 31.50 1.02 1.56 .75 .61 Â ¾x4½ 16

30 32.00 4.00 33.29 33.46 32.17 36.88 39.12 39.12 1.31 2.00 .82 .66 1¿ 1x5½ 20

36 38.30 4.00 39.59 39.76 38.47 43.75 46.00 46.00 1.45 2.00 1.00 .74 1¿ 1x5½ 24

42 44.50 4.00 45.79 45.96 44.67 50.62 53.12 53.12 1.45 2.00 1.25 .82 1À 1¼x6½ 28

48 50.80 4.00 52.09 52.26 50.97 57.50 60.00 60.00 1.45 2.00 1.35 .90 1À 1¼x6½ 32

sotis

Text Box


TylerUtilitiesDivision•11910CR492•Tyler,Texas75706•(800)527-84782 UnionFoundryCompany•Box309•Anniston,Alabama36202•(800)226-7601 02/01/08

90° Bends (1/4) 45° Bends (1/8) 22½° Bends (1/16) 11¼° (1/32)

Dimensions Dimensions Dimensions DimensionsSize T A R Weight A R Weight A R Weight A R Weight

3 .34 3.5 2.5 19 2.00 2.41 17 1.50 2.51 15 1.25 2.53 16

4 .35 4.0 3.0 26 2.50 3.56 22 1.75 3.81 20 1.50 5.12 20

6 .37 6.5 6.0 49 3.50 7.25 39 2.25 6.35 31 1.50 5.12 29

8 .39 7.5 7.0 64 4.00 8.44 56 2.85 11.80 50 2.06 15.80 45

10 .41 9.5 9.0 102 5.01 10.88 78 3.35 14.35 66 2.32 18.36 59

12 .43 10.5 10.0 129 5.98 13.25 102 3.86 16.90 87 2.56 20.90 82

14 .51 12.0 11.5 214 5.50 12.06 155 3.93 17.25 142 2.59 21.25 136

16 .52 13.0 12.5 273 5.98 13.25 204 3.98 17.50 178 2.62 21.50 157

18 .59 15.5 14.0 411 6.50 12.36 292 7.50 30.19 286 3.00 60.84 283

20 .60 17.0 15.5 519 7.00 13.59 372 8.50 35.19 376 3.50 71.07 374

24 .62 17.0 15.5 721 7.50 14.89 490 9.00 37.69 512 3.50 76.12 487

30.66 21.50 19.0 930 10.50 9.31 716 6.75 21.36 665 4.75 22.84 600

36 .74 24.50 22.0 1450 11.50 21.73 1110 7.75 26.39 960 5.00 25.38 820

42 .82 29.25 26.7 2205 14.00 27.76 1610 9.00 32.68 1350 6.00 35.54 1180

48 .90 33.25 30.75 2990 15.00 30.17 2090 10.00 27.70 1760 6.50 40.61 1475

BENDS



*OFFSETS MJ x MJ MJ x PE

Dimensions Weights Size D L1 L MJxMJ MJxPE

4 6 10 -- 45 -- 4 12 16 -- 55 -- 4 18 22 -- 65 -- 4 24 28 -- 75 -- 6 6 12 17.5 41 54 6 12 18 -- 65 -- 6 18 24 -- 75 -- 6 24 30 -- 85 -- 8 6 13 -- 84 -- 8 12 19 -- 90 -- 8 18 25 -- 100 --

*NotincludedinAWWAC153.

sotis

Text Box



90° Bend MJ x PE (1/4) 45° Bend MJ x PE (1/8) 22½° Bend MJ x PE (1/16) 11¼° Bend MJ x PE (1/32)

Dimensions Dimensions Dimensions Dimensions Size T A Y R Weight A Y R Weight A Y R Weight A Y R Weight

3 .34 3.5 9.0 2.5 18 2.0 7.5 2.41 17 1.50 7.00 2.51 19 1.25 6.75 7.62 15 4 .35 4.0 9.5 3.0 26 2.5 8.0 3.56 22 1.75 7.25 3.81 20 1.50 7.00 5.12 20 6 .37 6.0 11.5 5.0 45 3.2 8.7 5.49 38 2.25 7.75 6.35 33 1.50 7.00 5.12 32 8 .39 7.5 13.0 7.0 64 4.0 9.5 8.44 55 2.84 8.34 11.80 51 2.05 7.55 15.80 4410 .41 9.5 15.0 9.0 108 5.0 10.5 10.88 78 3.35 8.85 14.35 66 2.31 7.81 18.36 6012 .43 9.0 14.4 6.0 114 6.0 11.5 13.25 104 3.50 9.00 12.70 89 2.56 8.06 20.90 7914 .51 12.0 20.0 11.5 219 5.5 13.4 10.85 165 3.93 11.93 17.25 152 2.59 10.59 21.25 13716 .52 13.0 21.0 12.5 254 6.0 14.0 13.25 206 3.98 11.98 17.50 181 2.62 10.62 21.50 16124 .62 17.0 25.0 15.5 710 7.5 16.6 14.69 460 9.00 17.66 37.69 455 9.00 26.12 12.00 47530 .68 21.5 30.5 -- 865 10.5 19.5 -- 715 6.75 15.75 -- 600 -- -- -- --

BENDS

90° Swivel x Swivel Hydrant Ell

DimensionsSize T A B C D E F R*Weight

6 .37 10.5 15.5 6.90 11.2 6.81 7.98 6.0 74

*Weightincludestwoswivelglands.

90° Bend MJ x Flange 45° Bend MJ x Flange 22½° Bend MJ x Flange 11¼° Bend MJ x Flange (1/4) (1/8) (1/16) (1/32)

Dimensions Dimensions Dimensions Dimensions Size T A R F Weight A R F Weight A R F Weight A R F Weight

3 .34 3.5 2.5 5.5 21 ... ... .. .. ... ... .. .. ... ... .. .. 4 .35 4.0 3.0 6.5 28 2.50 3.56 4.0 34 1.75 3.81 4.0 34 1.50 5.12 4.0 19 6 .37 6.0 5.0 8.0 45 3.25 5.49 5.0 57 2.25 5.35 5.0 57 1.50 5.12 5.0 30 8 .39 7.5 7.0 9.0 73 4.25 7.93 5.5 83 2.50 7.62 5.5 83 1.75 7.70 5.5 5010 .41 9.5 9.0 11.0 113 5.00 9.76 6.5 122 3.00 10.16 6.5 122 2.00 10.25 6.5 7512 .43 10.5 10.0 12.0 141 6.0012.19 7.5 159 3.50 12.70 7.5 159 2.25 12.82 7.5 8814 .51 12.0 11.5 14.0 217 5.5010.85 8.5 20716 .52 13.0 12.5 15.0 280 6.0012.02 9.5 290



sotis

Text Box



TEES

MJ Tee MJ x FE Tee MJ x Swivel Tee Cross

Dimensions Weights Size T T1 H J1 J2 J3 MJ MJxFE †MJxS Cross

3 .34 .34 3.5 3.50 5.5 ... 26 29 ... 31 4x3 .35 .34 3.5 4.00 6.5 ... 35 34 ... 39 4 .35 .35 4.0 4.00 6.5 ... 36 39 ... 45 6x3 .37 .34 4.0 4.00 6.5 ... 51 54 ... ... 6x4 .37 .35 4.0 5.00 8.0 ... 52 57 ... 62 6 .37 .37 5.0 5.00 8.0 10.50 66 68 77 79 8x3 .39 .34 4.0 6.50 9.0 ... 56 ... ... ... 8x4 .39 .35 4.5 6.50 9.0 ... 72 82 ... 84 8x6 .39 .37 5.5 6.50 9.0 11.50 79 81 105 98 8 .39 .39 6.5 6.50 9.0 11.50 90 101 116 112 10x3 .41 .34 4.0 7.50 11.0 ... 80 ... ... ... 10x4 .41 .35 4.5 7.50 11.0 ... 82 92 ... 98 10x6 .41 .37 5.5 7.50 11.0 13.00 99 116 114 121 10x8 .41 .39 6.5 7.50 11.0 13.00 116 128 138 135 10 .41 .41 7.5 7.50 11.0 ... 132 144 ... 156 12x3 .43 .34 4.0 8.75 12.0 ... 99 ... ... ... 12x4 .43 .35 4.5 8.75 12.0 ... 108 118 ... 119 12x6 .43 .37 5.5 8.75 12.0 14.25 119 133 132 138 12x8 .43 .39 6.5 8.75 12.0 14.25 126 146 149 149 12x10 .43 .41 7.5 8.75 12.0 ... 159 174 ... 187 12 .43 .43 8.75 8.75 12.0 ... 171 198 ... 202 14x6 .51 .44 6.5 10.50 14.0 16.00 183 205 211 210 14x8 .51 .45 7.5 10.50 14.0 ... 211 ... ... 231 14x10 .51 .46 8.5 10.50 14.0 ... 229 244 ... 255 14x12 .51 .47 9.5 10.50 14.0 ... 245 284 ... 269 14 .51 .51 10.5 10.50 14.0 ... 281 291 ... 299 16x6 .52 .45 6.5 11.50 15.0 17.00 222 230 243 250 16x8 .52 .46 7.5 11.50 15.0 ... 245 248 ... 264 16x10 .52 .47 8.5 11.50 15.0 ... 265 287 ... 286 16x12 .52 .48 9.5 11.50 15.0 ... 277 312 ... 312 16x14 .52 .51 10.5 11.50 15.0 ... 317 348 ... ... 16 .52 .52 11.5 11.50 15.0 ... 337 324 ... 457 30 .66 .66 22.0 22.00 ... ... ... ... ... 1840 36 .74 .74 26.0 26.0 ... ... ... ... ... 2655

†Weightsincludeswivelgland

CROSS



sotis

Text Box



Swivel x Solid Adapterwith Swivel Gland

Sizeby WallLayingLength Thickness Weight

6x13 .37 52 6x18 .37 65 6x24 .37 69 8x12 .39 52

TEES (Continued)

MJ Tee MJ x FE Tee MJ x Swivel Tee

Dimensions Weights Size T T1 H J1 J2 J3 MJ MJxFE †MJxS

18x6 .59 .44 6.5 14.5 15.5 18.0 275 261 279 18x8 .59 .45 7.5 14.5 14.5 ... 280 351 ... 18x10 .59 .47 8.5 12.5 ... ... 286 ... ... 18x12 .59 .49 9.5 12.5 ... ... 372 ... ... 18x14 .59 .56 10.5 12.5 ... ... 415 ... ... 18x16 .59 .57 11.5 12.5 ... ... 445 ... ... 18 .59 .59 13.0 12.5 ... ... 490 ... ... 20x6 .60 .44 7.0 16.0 17.0 19.5 335 362 358 20x8 .60 .45 8.0 14.0 ... ... 390 ... ... 20x10 .60 .47 9.0 14.0 ... ... 417 ... ... 20x12 .60 .49 10.0 14.0 ... ... 460 ... ... 20x14 .60 .56 11.0 14.0 ... ... 475 ... ... 20x16 .60 .57 12.0 14.0 ... ... 530 ... ... 20x18 .60 .59 13.0 14.0 ... ... 560 ... ... 20 .60 .60 14.0 14.0 ... ... 605 ... ... 24x6 .62 .44 7.0 18.0 19.0 21.5 465 451 457 24x8 .62 .45 8.0 16.0 ... ... 475 ... ... 24x10 .62 .47 9.0 16.0 ... ... 516 ... ... 24x12 .62 .49 10.0 18.0 ... ... 549 580 ... 24x14 .62 .56 11.0 16.0 ... ... 585 ... ... 24x16 .62 .57 12.0 19.5 ... ... 625 744 ... 24x18 .62 .59 13.0 16.0 ... ... 675 ... ... 24x20 .62 .60 15.0 17.0 ... ... 740 ... ... 24 .62 .62 17.0 17.0 ... ... 844 ... ... 30x6 .66 .36 7.00 20.0 ... ... 700 ... ... 30x8 .66 .38 8.50 20.0 ... ... 739 ... ... 30x12 .66 .42 10.0 20.0 ... ... 739 ... ... 30x16 .66 .50 12.5 20.0 ... ... 959 ... ... 30x20 .66 .57 15.0 20.0 ... ... 995 ... ... 30x24 .66 .61 16.0 20.0 ... ... 1160 ... ... 30 .66 .66 20.0 20.0 ... ... 1323 ... ... 36x16 .74 .50 12.5 23.5 ... ... 1350 ... ... 36x24 .74 .61 16.0 23.5 ... ... 1498 ... ... 36x30 .74 .66 20.0 23.5 ... ... 1555 ... ... 36 .74 .74 23.5 23.5 ... ... 1900 ... ... 42 .82 .82 30.0 30.0 ... ... 3175 ... ...

†Weightsincludeswivelgland.

MJ GLANDS

Glands

Size Weight Size Weight

3 3 12 10 4 4 14 17 6 5 16 21 8 6 18 2210 9 20 32 24 37

Swivel x Swivel Adapter

Sizeby WallLayingLength Thickness Weight

6x12 .37 28 6x18 .37 49 6x24 .37 52

SwivelGlands,page19-20RetainerGlands,page7



sotis

Text Box



†

††

WYES/LATERAL

MJ x MJ MJSEBxPE MJLEBxPE PE x PE

Dimensions MJ SEB LEB PE Weights Size T T1 L L L L MJ SEB LEB PE

4x3 .35 .34 3.0 8.5 8.5 14.0 18 17 17 186x3 .37 .34 5.0 10.5 10.5 16.0 28 25 27 206x4 .37 .35 4.0 9.5 9.5 15.0 28 26 27 268x4 .39 .35 5.0 10.5 10.5 16.0 36 34 36 338x6 .39 .37 4.0 9.5 9.5 15.0 39 38 39 3010x4 .41 .35 7.0 12.5 12.5 18.0 53 46 51 ...10x6 .41 .37 5.0 10.5 10.5 16.0 59 48 52 4910x8 .41 .39 4.0 9.5 9.5 15.0 54 52 52 4712x4 .43 .35 9.0 14.5 14.5 20.0 67 61 68 6012x6 .43 .37 7.0 12.5 12.5 18.0 64 58 66 5412x8 .43 .39 5.0 10.5 10.5 16.0 57 62 65 6012x10 .43 .41 4.0 9.5 9.5 15.0 63 61 65 5714x6 .51 .44 9.0 17.0 14.5 22.5 104 107 112 ...14x8 .51 .45 7.0 15.0 12.5 20.5 104 107 108 ...14x10 .51 .46 5.0 13.0 10.5 18.5 100 102 100 ...14x12 .51 .47 4.0 12.0 9.5 17.5 100 101 100 10016x6 .52 .45 11.0 19.0 16.5 24.5 132 131 141 12816x8 .52 .46 9.0 17.0 14.5 22.5 136 128 136 13616x10 .52 .47 7.0 15.0 12.5 20.5 128 124 128 12316x12 .52 .48 5.0 13.0 10.5 18.5 120 123 119 11316x14 .52 .51 4.0 12.0 12.0 20.0 140 139 138 13318x8 .59 .45 14.0 22.0 19.5 27.5 201 180 195 ...18x10 .59 .47 12.0 20.0 17.5 25.5 196 180 185 ...18x12 .59 .49 10.0 18.0 15.5 23.5 175 170 190 ...18x14 .59 .56 8.0 16.0 16.0 24.0 180 181 200 ...18x16 .59 .57 7.0 15.0 15.0 23.0 194 180 190 ...20x10 .60 .47 14.0 22.0 19.4 27.5 225 210 210 ...20x12 .60 .49 12.0 20.0 17.5 25.5 214 208 210 ...20x14 .60 .56 10.0 18.0 17.8 26.0 208 198 205 ...20x16 .60 .57 8.0 16.0 15.8 24.0 225 215 222 ...20x18 .60 .59 7.0 15.0 15.0 23.0 233 220 ... ...24x12 .62 .49 16.0 24.0 21.4 29.5 320 302 300 ...24x14 .62 .56 14.0 22.0 21.8 30.0 314 325 322 ...24x16 .62 .57 12.0 20.0 19.8 28.0 325 319 340 ...24x18 .62 .59 10.0 18.0 18.0 26.0 325 310 ... ...24x20 .62 .60 8.0 16.0 16.0 24.0 315 305 ... ...30x16 .66 .50 30.0 39.0 ... ... 475 565 ... ...30x18 .66 .54 28.0 37.0 ... ... 495 590 ... ...30x20 .66 .57 24.0 33.0 ... ... 525 560 ... ...30x24 .66 .61 10.0 24.5 ... ... 478 495 ... ...36x16 .74 .50 ... ... ... ... ... 890 ... ,,,36x20 .74 .57 ... 45.0 ... ... ... 874 ... ...36x24 .74 .61 19.0 33.0 ... ... 770 746 ... ...36x30 .74 .66 ... 24.5 ... ... ... 725 ... ...42x30 .82 .66 20.0 ... ... ... 1185 ... ... ...48x30 .90 .66 40.0 ... ... ... 1505 ... ... ...

*Wyes

Dimensions Size A Y T T1 Weights

3 2.5 7.5 .34 .34 36 4x3 2.0 8.5 .35 .34 39 4 2.5 8.5 .35 .35 45 6x4 1.5 11.0 .37 .35 67 6 3.0 13.0 .37 .37 85 8x4 0.5 13.0 .39 .35 86 8x6 2.0 14.5 .39 .37 109 8 3.5 16.0 .39 .39 117 10x4 0.0 15.0 .41 .35 112 10x6 1.0 16.0 .41 .37 129 10x8 2.5 17.0 .41 .39 162 10 3.5 19.0 .41 .41 199 12x4 0.0 16.5 .43 .35 141 12x6 1.5 18.5 .43 .37 170 12x8 1.5 18.5 .43 .39 177 12x10 3.0 20.0 .43 .41 216 12 4.5 22.5 .43 .43 269 14 6.0 25.0 .51 .51 476 16x6 0.0 21.0 .52 .45 300 16x8 0.5 22.5 .52 .46 349 16x12 3.5 25.0 .52 .48 471 16 6.5 28.0 .52 .52 635*NotincludedinAWWAC153.†Ratedat250psi.

REDUCERS



MJ x PE x MJ Tee

Dimensions Size T T1 H J1 Z Weights

6 .37 .37 5.0 5.0 11.5 57 8x6 .39 .37 5.5 6.5 11.5 79 8 .39 .39 6.5 6.5 12.5 83 10 .41 .41 7.5 7.5 13.0 133

MJxFEFlangeDimensionsareoninsidefrontcover.

sotis

Text Box



SOLID & TAPPED PLUGS & CAPS

Short Long

Dimensions Weights Size T L1 L2 Short Long

3 .34 7.5 12 13 22 4 .35 7.5 12 19 25 6 .37 7.5 12 28 39 8 .39 7.5 12 38 55 10 .41 7.5 12 48 68 12 .43 7.5 12 62 81 14 .56 9.5 15 116 146 16 .57 9.5 15 138 174 18 .68 9.5 15 160 230 20 .69 9.5 15 212 269 24 .75 9.5 15 272 380 30 .66 15.0 15 500 ... 30 .66 ... 24 ... 640 36 .74 15.0 15 725 ... 36 .74 ... 24 ... 925 42 .82 ... 24 ... 1146 48 .90 ... 24 ... 1455

SOLID SLEEVES

MJ x FE FE x PE

Dimensions Weights Size T L1 L2 MJxFE FExPE

3 .34 6 12 18 ... 4 .35 6 12 26 23 6 .37 6 12 36 35 8 .39 6 12 50 50 10 .41 6 12 60 69 12 .43 6 12 88 88 14 .51 6 12 127 ... 16 .52 6 12 155 149 20 .60 6 ... 275 ... 30 .66 7 ... 470 ... 36 .74 8 ... 750 ...

ADAPTERS

MJ Tapped Tee (2" Tap)

Dimensions

Size T L Max.Tap Weights

3 .34 6 2 19 4 .35 6 2 23 6 .37 6 2 35 8 .39 6 2 54 10 .41 6 2 68 12 .43 6 2 88 16 .52 6 2 164

TAPPED TEE

3"-12" 14"-24" 3"-12" 14"-24" MJ Plug MJ Cap

Dimensions Max. Weights Size T Tap Plugs Caps

3 .46 2 9 8 4 .46 2 9 10 6 .46 2 18 18 8 .46 2 25 26 10 .56 2 36 32 12 .56 2 47 46 14 .62 2 76 85 16 .62 2 98 94 18 .65 2 138 121 20 .66 2 158 149 24 .68 2 223 210 30 .66 2 355 345 36 .74 2 688 626



MJxFEFlangeDimensionsareoninsidefront

cover.

sotis

Text Box



VALVEINSTALLATIONS

METERSETTINGS

TYPICAL CUTTING-IN SLEEVE INSTALLATIONS

MJ x FE Cutting-InSleevewithDualPurposeAccessories

Dimensions ShippingWt.Size ForPipeSize L L1 T Assembled

4 4.80-5.00O.D. 10 9.5 .35 33 6 6.90-7.10O.D. 10 9.5 .37 50 8 9.05-9.30O.D. 10 9.5 .39 6710 11.10-11.40O.D. 10 9.5 .41 12212 13.20-13.50O.D. 10 9.5 .43 157

FlangedendsarefacedanddrilledperANSI/AWWAC110/A21.10.Mechanicaljointendsaredesignedtoreceivebothstan-dardandoversizegrayorductileironpipeasshownabove.

DUAL PURPOSE CUTTING-IN SLEEVE

Pressure Gland PipeO.D. D.I.Pipe Noof Sizeof Rating, O.D. O.D. Wall Set Set Gland Weight Size psi B A Class Screws Screws Weight w/Acces.

3 350 7.69 3.96 50-56 4 Áx2 5 7 4 350 9.12 4.80 50-56 4 Áx2 6 13 6 350 11.12 6.90 50-56 6 Áx2 11 20 8 250 13.37 9.05 50-56 9 Áx2 13 25 10 250 15.62 11.10 50-56 12 Áx2 18 33 12 150 17.88 13.20 50-56 16 Áx2 23 38 14 250 20.25 15.30 53-56 20 Áx2½ 44 55 16 200 22.50 17.40 53-56 24 Áx2½ 51 64 18 200 24.75 19.50 53-56 24 Áx2½ 62 72 20 200 27.00 21.60 53-56 28 Áx3 73 91 24 150 31.50 25.80 53-56 32 Áx3 93 118*NotincludedinAWWAC110

MechanicalJointRetainerGlandsaredesignedtoprovideamethodforrestrain-ingmechanicaljointpipeandfittingsandotherstandardizedmechanicaljointsagainstpossiblejointseparation,ruptureorblow-outcausedbyinternalwaterpres-sure. Thesetscrewsaresquare-headedwithTypeCknurledcuppoints,andareshippedalreadyassembledintheGlands.Theyaremanufacturedof4140gradealloysteel,andareheattreatedtoaRock-wall“C”45/53casehardness.Tee-headboltsandgasketsarenotincluded,butmaybeorderedseparately.Recommend-edtorqueforsetscrewsis75footpounds,andsetscrewsonoppositesidesoftheglandsshouldbetightenedalternately. Tee-headboltholesizeandspac-ingareequaltoMJGlandsasshowninAWWAC-111.StandardmechanicalJointgasketsasshowninC-111shouldbeused.

DUCTILE IRON RETAINER GLANDS

*RETAINER GLAND ASSEMBLYPipeWallThickness:Sizes3"-12"arerecommendedforductileironpipeclass50thru56.Sizes14"thru24"arerecommendedforductileironpipeclass53thru56.



SeeInstallationsInstructions........................................................ Page50

MJxFEFlangeDimensionsareoninsidefront

cover.

sotis

Arrow

sotis

Cloud

sotis

Text Box


A H E A D O F T H E F L O W®

www.nibco.com

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.234.0557 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455

www.nibco.com4

Revision 5/9/2013

All of the advantages found in copper as a metal have been capitalized to the utmost in the manufacture of NIBCO® Fittings. Because of the accuracy of construc tion and design, copper plumbing is more efficient and less expensive.

NIBCO manufactures nine general types of fittings: Wrot Pressure; Cast Pressure; Wrot Drainage; Cast Drainage; Flanges; Flared Tube; Threaded Bronze; Insert Fittings for PEX; Barbed Insert Fittings for Polybutylene. Each has its particular place and use and each offers its own advantages when used for the proper service requirement.

Material & Construction — NIBCO Fittings are made from the highest quality raw materials — Cast Fittings are offered in traditional copper alloys C83600, and C84400 and high quality lead-free* dezincification-resistant (DZR) silicon brass alloy C87850 per ASTM Specification B584. Wrot Copper Fittings are made from commercially pure copper mill products already meeting current lead-free* requirements per ASTM Specifications B75 Alloy C12200.

*Lead Free refers to the wetted surface of pipe, fittings and fixtures in potable water systems that have a weighted average lead content 0.25%. Source: California Health & Safety Code (116875); Vermont Act 193.

NIBCO Fittings are produced to meet the requirements of applicable standards.

The majority of NIBCO® brand wrot and cast fittings are manufactured in the U.S.A. and Mexico*. The manufacturing plants at Stuarts Draft, VA, Nacogdoches, TX and Reynosa, Mexico are registered to ISO 9001 quality standards.

Following is suggested phrasing to be incorporated in your specifications or bills of material for Copper Tube Fittings.

WROT SOLDER JOINT FITTINGS — "Solder Joint Fittings shall be produced to one of the following specifications:

Specifications

1. "Material and workmanship shall be in accordance with ASME/ANSI B16.22; Wrought Copper and Copper Alloy Solder Joint Pressure Fittings.”

2. "The dimensional, material and workmanship shall meet the requirements of MSS SP-104; Wrought Copper Solder Joint Pressure Fittings.”

3. "The dimensional, material and workmanship of 5"–12" copper fittings shall meet the requirements of MSS SP-109 “Welded Fabricated Copper Solder Joint Pressure Fittings.”

4. "Third party certified to NSF/ANSI61."

5. "Lead-free* fittings are certified by NSF/ANSI 61, Annex G and are in compliance with Section 116875 of the California Health & Safety Code and Vermont Act 193."

CAST COPPER ALLOY SOLDER JOINT FITTINGS — “Cast Copper Alloy Solder Joint Fittings shall be in accor dance with ASME B16.18.”

WROT DRAINAGE FITTINGS — “Wrot Drainage Fittings shall be in accordance with ASME B16.29.”

CAST COPPER ALLOY SOLDER JOINT DRAINAGE FITTINGS — “Cast Copper Alloy Solder Joint Drainage Fittings shall be in accordance with ASME B16.23.”

CAST COPPER ALLOY FLARED TUBE FITTINGS — “Cast Copper Alloy Flared Tube Fittings shall be in accor dance with ASME B16.26.”

CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS —

CLASS 150 — "Cast Copper Alloy Flanges and Flanged Fittings shall meet the requirements of MSS SP-106" and/or "the workmanship and dimensions of Federal Specifications WW-F-406 or ASME Std. B16.24."

"CLASS 125 — Material, workmanship and dimensions of flanges shall be in accordance with MSS SP-106."

CAST BRONZE THREADED FITTINGS — “Cast Bronze Threaded Fittings shall be in accordance with ANSI/ASME B16.15.”

POLYBUTYLENE COPPER INSERT TYPE VALVES AND FITTINGS — “Wrot Copper Insert Fittings shall be manufactured per MSS SP-103.”

NIBCO® Copper Tube Fittings are all produced to above Standards. To simplify, write your specifications to read: “Copper Tube Fittings to be in accordance with specifications as outlined in NIBCO Copper Fittings Catalog.”

WROT COPPER MEDICAL GAS SYSTEM COMPONENTS — "Wrot copper fittings that are to be installed in medical gas applications shall be prepared in accordance with NFPA 99, Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1. Packaging shall be adequately protective and include labeling that identifies the preparer and states that the product has been cleaned and bagged for oxygen or med gas service."

For technical information and dimensions refer to the engineering section contained in this catalog.

* NIBCO, may, from time to time, source and/or supplement a wrot or cast fitting product from suppliers outside of the U.S.A. and/or Mexico.

Section 221300 - Faciltiy Sanitary and Storm 2.5 B - Copper Pipe Fittings

sotis

Cloud

sotis

Cloud


www.nibco.com


www.nibco.com5

Revision 5/9/2013

Wrot and Cast Pressure Fittings

600 Series – Wrot700 Series – Cast

Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8Air Chambers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Bulkhead Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Bushings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10Crosses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14Fitting Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Plugs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Return Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Straps & Hangers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-20Traps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Venturi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Y’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

The manufacturing plants at Stuarts Draft, VA, Nacogdoches, TX and Reynosa, Mexico manufacture products under a Quality Management System conforming to the current revision of ISO-9001 International Standards



www.nibco.com


www.nibco.com6

Revision 5/9/2013

703-2 Fitting Adapter Ftg x F – Cast APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

1/2 x 1/4 0.11 17/32

3/4 x 1/2 0.13 19/16

1 x 1/2 0.14 17/16

1 x 3/4 0.38 131/32

2 1/2 1.65 215/16

3 2.52 31/4

703-5 Special Drop Adapter C x F – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

1/2 0.16 3/4

3/4 0.24 7/8

703-5B Drop Adapter C x F – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

1/2 0.15 3/4

ADAPTERS

603 Adapter C x F – Wrot APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

1/8 0.03 13/32

1/8 x 1/4 0.03 1/2

1/4 0.03 5/8

1/4 x 3/8 0.04 7/8

3/8 0.04 11/16

3/8 x 1/4 0.03 9/16

3/8 x 1/2 0.09 29/32

3/8 x 3/4 0.10 1 1/2 0.09 27/32

1/2 x 1/4 0.06 1/2

1/2 x 3/8 0.04 17/32

1/2 x 3/4 0.14 1 5/8 x 1/2 0.11 3/4

5/8 x 3/4 0.13 29/32

3/4 0.15 29/32

3/4 x 1/2 0.10 5/8

3/4 x 1 0.21 11/8

1 0.24 31/32

1 x 1/2 0.14 5/8

1 x 3/4 0.19 25/32

1 x 1 1/4 0.28 17/32

1 1/4 0.33 13/32

1 1/4 x 1 0.28 29/32

1 1/4 x 1 1/2 0.40 11/4

1 1/2 0.44 11/8

1 1/2 x 1 0.43 25/32

1 1/2 x 1 1/4 0.47 11/32

1 1/2 x 2 0.78 11/32

2 0.63 13/32

2 x 1 1/2 0.74 111/32

2 1/2 1.15 13/16

3 1.88 15/16

4 3.14 17/8

703 Adapter C x F – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

1/4 x 1/2 0.13 27/32

1/2 x 1 0.28 1 3/4 x 3/8 0.17 3/4

3/4 x 1 1/4 0.54 11/8

1 x 1 1/2 0.68 13/32

1 1/4 x 3/4 0.29 13/16

1 1/4 x 2 0.98 15/32

2 x 1 1/4 0.81 27/32

2 1/2 1.62 13/8

3 2.34 11/2

4 4.23 19/16

603-2 Fitting Adapter Ftg x F – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

1/4 0.03 13/32

3/8 0.06 13/16

1/2 0.09 17/16

1/2 x 3/8 0.05 11/4

3/4 0.13 111/16

1 0.27 21/32

1 1/4 0.31 21/8

1 1/2 0.43 25/16

2 0.61 217/32

Consult price sheet for Made to Order items and for minimum order quantities.



www.nibco.com


www.nibco.com7

Revision 5/9/2013

ADAPTERS continued

604 Adapter C x M – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

1/8 x 1/4 0.03 7/16

1/4 0.03 23/32

1/4 x 1/2 0.07 – 3/8 0.04 15/32 3/8 x 1/4 0.06 – 3/8 x 1/2 0.09 1 3/8 x 3/4 0.15 15/16

1/2 0.07 5/8

1/2 x 1/4 0.05 5/8

1/2 x 3/8 0.05 19/32

1/2 x 3/4 0.14 31/32 1/2 x 1 0.25 11/2 5/8 x 1/2 0.08 3/4

5/8 x 3/4 0.16 11/8

3/4 0.14 13/16

3/4 x 1/2 0.10 27/32

3/4 x 1 0.26 17/16

1 0.21 31/32

1 x 1/2 0.19 31/32

1 x 3/4 0.18 29/32

1 x 1 1/4 0.38 11/2

1 x 1 1/2 0.46 17/32

1 1/4 0.35 15/16

1 1/4 x 3/4 0.30 31/32

1 1/4 x 1 0.25 15/32

1 1/4 x 1 1/2 0.51 119/32

1 1/2 0.46 31/32

1 1/2 x 1 0.44 13/32

1 1/2 x 1 1/4 0.38 13/16

1 1/2 x 2 0.76 11/8

2 0.81 13/32

2 x 1 1/2 0.58 111/32

2 1/2 1.19 127/32

3 1.39 21/8

4 3.19 –


704 Adapter C x M – Cast APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

3/4 x 3/8 0.16 13/16

3/4 x 1 1/4 0.38 17/32

3/4 x 1 1/2 0.59 117/32

1 x 1 1/2 0.64 29/32

1 x 2 1.14 15/8

1 1/4 x 2 0.87 19/32

2 x 1 1/4 1.08 15/16

2 x 2 1/2 1.57 115/32

2 1/2 1.49 117/32

2 1/2 x 2 1.83 111/16

3 1.97 11/2

4 3.66 111/16

5 8.60 25/8

604-F Flush Adapter C x M – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

1/2 0.03 9/16

3/4 0.03 19/32

704-H Hose Adapter C x Hose – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

1/2 0.09 3/16

NOTE: Fits 1/2," 5/8" and 3/4" Garden Hose.

604-2 Fitting Adapter Ftg x M – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

1/4 0.03 11/8

3/8 0.04 11/4

1/2 0.09 115/32

1/2 x 3/8 0.05 111/32

1/2 x 3/4 0.16 113/16

3/4 0.17 115/16

1 0.25 21/4

1 1/2 0.58 213/32

2 0.83 23/4

704-2 Fitting Adapter Ftg x M – Cast APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

3/4 x 1/2 0.12 123/32

3/4 x 1 0.27 131/32

1 x 3/4 0.20 115/16

1 1/4 0.43 25/32

1 1/2 0.54 213/32

2 0.89 23/4

2 1/2 1.55 33/8

3 2.21 323/32



www.nibco.com


www.nibco.com8

Revision 11/20/2012


www.nibco.com8

750 Bulkhead Fitting C x C – Cast APPROX. DIM. A DIM. B NOM. SIZE NET WT./LBS. INCHES INCHES

1/2 0.48 11/4 1 3/4 0.77 19/32 11/4

1 1.30 11/2 15/8

1 1/2 2.87 11/2 23/8

2 3.65 21/32 25/8

750-3 Bulkhead Fitting C x F – Cast APPROX. DIM. A DIM. B NOM. SIZE NET WT./LBS. INCHES INCHES

1/2 0.50 27/16 1 3/4 0.79 213/16 11/4

1 1.39 33/8 15/8

750-4 Bulkhead Fitting C x M – Cast APPROX. DIM. A DIM. B NOM. SIZE NET WT./LBS. INCHES INCHES

1/2 0.51 131/32 1 3/4 0.79 25/32 11/4

704-2-H Hose Adapter Ftg x Hose – Cast APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

3/4 F x 3/4 H 0.16 15/8

NOTE: Fits 1/2," 5/8" and 3/4" Garden Hose.

619 Air Chamber Ftg. – Wrot APPROX. DIM. A DIM. L NOM. SIZE NET WT./LBS. INCHES INCHES

1/2 x 6 0.20 1 6 1/2 x 12 0.41 1 12 1/2 x 14 0.76 11/8 14

620-L Air Chamber or Stub-Out Ftg – WrotAs Air Chamber, just solder one joint. When used as Stub-Out, simply pressure test system then cut off stub-out (save piece for future use) and install valve or fixture.

APPROX. DIM. L NOM. SIZE NET WT./LBS. INCHES

1/2 x 6 0.14 6 1/2 x 8 0.19 8 1/2 x 10 0.24 10 1/2 x 12 0.28 12 3/4 x 12 0.46 12

�AIR CHAMBERS

�BULKHEAD FITTINGS


618 Flush Bushing Ftg x C – Wrot APPROX. DIM. C NOM. SIZE NET WT./LBS. INCHES

1/4 x 1/8 0.01 3/32

3/8 x 1/4 0.01 3/16

1/2 x 1/4 0.04 9/32

1/2 x 3/8 0.02 3/16

5/8 x 1/2 0.03 3/32

3/4 x 3/8 0.11 15/32

3/4 x 1/2 0.08 11/32

3/4 x 5/8 0.04 7/32

1 x 1/2 0.22 15/32

1 x 3/4 0.12 7/32

1 1/4 x 1 0.17 5/32

1 1/2 x 1 1/4 0.22 1/4

2 x 1 1/2 0.66 5/16

618-3 Flush Bushing Ftg x F – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

1/2 x 1/8 0.04 9/16

1/2 x 1/4 0.02 9/16

3/4 x 3/8 0.06 13/16

1 x 1/2 0.12 31/32

1 1/2 x 1 0.25 15/32

718-3 Flush Bushing Ftg x F – Cast APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

1 1/4 x 3/4 0.18 11/32

�BUSHINGSADAPTERS continued



www.nibco.com


www.nibco.com9

Revision 5/9/2013


www.nibco.com9


CAPS

617 Tube Cap C – Wrot APPROX. DIM. N NOM. SIZE NET WT./LBS. INCHES

1/8 0.00 1/32

1/4 0.01 1/16

3/8 0.01 3/32

1/2 0.02 1/8

5/8 0.03 1/8

3/4 0.05 3/16

1 0.07 5/32

1 1/4 0.10 3/32

1 1/2 0.16 1/8

2 0.27 5/32

2 1/2 0.47 7/32

3 0.78 7/32

4 1.66 1/4

717 Tube Cap C – Cast APPROX. DIM. N NOM. SIZE NET WT./LBS. INCHES

5 5.48 7/16

6 9.07 17/32

717-D Drain Cap – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

1/2 0.06 21/32

�COUPLINGS

600 Reducing Coupling C x C – Wrot APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

1/8 x 3/16 O.D. 0.00 5/32

5/16 O.D. x 1/8 0.01 1/4

1/4 x 5/16 O.D. 0.01 3/16

1/4 x 1/8 0.01 3/16

3/8 x 1/4 0.02 3/16

3/8 x 5/16 O.D. 0.01 1/4

3/8 x 1/8 0.01 1/4

1/2 x 1/8 0.03 11/32

1/2 x 1/4 0.02 1/4

1/2 x 3/8 0.02 3/16

5/8 x 1/4 0.03 13/32

5/8 x 3/8 0.04 11/32

5/8 x 1/2 0.05 3/16

3/4 x 1/4 0.05 11/32

3/4 x 3/8 0.06 3/8

3/4 x 1/2 0.06 5/16

3/4 x 5/8 0.07 3/16

1 x 3/8 0.10 13/32

1 x 1/2 0.10 11/32

1 x 5/8 0.10 3/8

1 x 3/4 0.11 11/32

1 1/4 x 1/2 0.14 7/16

1 1/4 x 5/8 0.18 19/32

1 1/4 x 3/4 0.18 17/32

1 1/4 x 1 0.16 5/16

1 1/2 x 1/2 0.19 1/2

1 1/2 x 3/4 0.20 3/8

1 1/2 x 1 0.22 9/16

1 1/2 x 1 1/4 0.23 5/16

2 x 1/2 0.38 23/32

2 x 3/4 0.36 17/32

2 x 1 0.37 7/16

2 x 1 1/4 0.37 11/16

2 x 1 1/2 0.40 9/16

2 1/2 x 1 0.58 29/32

2 1/2 x 1 1/4 0.57 13/16

2 1/2 x 1 1/2 0.59 11/16

2 1/2 x 2 0.59 1/2

Continues…

APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

3 x 1 1/2 0.92 11/32

3 x 2 1.06 15/16

3 x 2 1/2 0.98 1/2

3 1/2 x 3 1.52 17/32

4 x 2 1.91 11/4

4 x 2 1/2 1.78 1 4 x 3 1.93 27/32

4 x 3 1/2 2.12 19/32

5 x 2 2.94 21/32

5 x 2 1/2 3.00 115/16

5 x 3 3.01 111/16

5 x 4 3.30 11/4

6 x 2 4.41 29/16

6 x 2 1/2 4.48 27/16

6 x 3 4.54 21/4

6 x 4 4.94 13/4

6 x 5 5.40 13/8

8 x 2 1/2 12.67 33/8

8 x 3 11.80 33/32

8 x 4 12.22 219/32

8 x 6 13.07 119/32

600-RS Coupling with Rolled Tube Stop C x C – Wrot APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

3/16 O.D. 0.00 1/8

1/8 0.01 1/8

5/16 O.D. 0.01 1/8

1/4 0.01 1/8

3/8 0.01 3/32

1/2 0.03 3/32

5/8 0.04 3/32

3/4 0.06 3/32

7/8 0.09 3/32

1 0.11 3/32

1 1/4 0.15 1/8

1 1/2 0.22 1/8

2 0.40 1/8

2 1/2 0.66 1/8

3 1.00 1/8

3 1/2 1.45 5/32

4 1.93 7/32



www.nibco.com


www.nibco.com10

Revision 5/9/2013

601 Coupling without Stop C x C – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

1/4 0.01 11/16

3/8 0.01 3/4

1/2 0.03 1 5/8 0.04 11/4

3/4 0.06 11/2

1 0.11 113/16

1 1/4 0.15 115/16

1 1/2 0.22 23/16

2 0.40 211/16

2 1/2 0.66 215/16

3 1.00 35/16

3 1/2 1.40 313/16

4 1.84 45/16

5 3.50 55/16

6 5.60 63/16

8 13.69 83/32

701 Reducing Coupling C x C – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

3 x 1 1/4 1.54 23/32

3 x 1 1.64 27/32

COUPLINGS continued


600-DS Coupling with Dimpled Tube Stop C x C – Wrot APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

3/16 O.D. 0.00 3/32

1/8 0.01 1/16

5/16 O.D. 0.01 3/32

1/4 0.01 1/16

3/8 0.01 3/32

1/2 0.03 3/32

5/8 0.04 3/32

3/4 0.06 3/32

7/8 0.09 3/32

1 0.11 3/32

1 1/4 0.15 1/8

1 1/2 0.22 1/8

2 0.40 1/8

2 1/2 0.66 1/8

3 1.00 1/8

3 1/2 1.45 5/32

4 1.93 7/32

5 3.53 7/32

6 5.63 7/32

8 14.48 15/32

701-D Drain Coupling C x C – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

1/2 0.08 1/4

3/4 0.14 1/4

1 0.22 1/4

702 Eccentric Coupling C x C – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

3/4 x 1/2 0.12 7/32

1 x 3/4 0.18 1/4

1 1/4 x 1 0.25 1/4

1 1/4 x 3/4 0.24 9/32

736 Cross-Over Coupling C x C – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

1/2 0.27 17/16

3/4 0.60 129/32



www.nibco.com


www.nibco.com11

Revision 5/9/2013

735 Cross C x C x C x C – Cast APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

3/8 0.08 5/16

1/2 0.14 7/16

3/4 0.28 9/16

1 0.54 23/32

1 1/4 0.78 7/8

1 1/2 1.05 1 2 2.00 11/4

2 1/2 2.96 11/2

�CROSSES ELBOWS

606 45° Elbow C x C – Wrot APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES

1/8 0.01 11/32 11/32

1/4 0.02 9/32 9/32

3/8 0.03 3/16 3/16

1/2 0.04 9/32 9/32

5/8 0.09 15/32 15/32

3/4 0.09 11/32 11/32

7/8 0.20 11/16 11/16

1 0.15 3/8 3/8

1 1/4 0.25 17/32 17/32

1 1/2 0.35 19/32 19/32

2 0.65 25/32 25/32

2 1/2 1.07 29/32 29/32

3 1.58 11/8 11/8

4 3.35 19/16 19/16

5 5.57 19/16 19/16

6 9.57 2 2 8 23.00 29/32 29/32

606-2 45° Fitting Elbow Ftg x C – Wrot APPROX. DIM. B DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES

1/4 0.02 9/16 1/4

3/8 0.02 21/32 3/16

1/2 0.04 3/4 7/32

5/8 0.08 11/8 13/32

3/4 0.10 11/16 5/16

1 0.16 19/32 15/32

1 1/4 0.25 119/32 17/32

1 1/2 0.35 125/32 19/32

2 0.65 23/16 25/32

2 1/2 1.06 23/16 29/32

3 1.55 219/32 15/32 Consult price sheet for Made to Order items and for minimum order quantities.

706-2 45° Fitting Elbow Ftg x C – Cast APPROX. DIM. B DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES

4 4.31 311/32 15/16

607 90° Elbow – Close Rough C x C – Wrot APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES

1/8 0.02 13/32 13/32

1/4 0.02 3/8 3/8

3/8 0.03 1/2 1/2

3/8 x 1/4 0.03 – – 1/2 0.04 11/32 11/32

1/2 x 3/8 0.04 7/16 21/32

3/4 0.10 1/2 13/16

3/4 x 1/2 0.10 9/16 25/32

3/4 x 5/8 0.11 29/32 7/8

7/8 0.20 29/32 29/32

1 0.18 21/32 21/32

1 x 1/2 0.18 – – 1 x 3/4 0.20 27/32 11/16

1 1/4 0.27 15/16 15/16

1 1/4 x 1 0.23 15/8 115/32

1 1/2 0.42 11/32 11/32

1 1/2 x 1 1/4 0.35 15/32 13/32

2 0.80 113/32 113/32

2 x 1 1/2 0.58 17/16 11/4

2 1/2 1.41 15/8 15/8

3 2.18 2 2 3 1/2 2.94 27/16 27/16

4 4.23 215/32 216/32

5 7.17 31/32 31/32

6 10.95 35/8 35/8

8 27.00 421/32 421/32



www.nibco.com


www.nibco.com12

Revision 5/9/2013

ELBOWS continued


707 90° Elbow – Close Rough C x C – Cast APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES

1 1/4 x 1/2 0.28 15/32 27/32

1 1/4 x 3/4 0.34 9/16 13/16

1 1/4 x 1 0.42 11/16 13/16

1 1/2 x 1 0.55 11/16 1 1 1/2 x 3/4 0.45 19/32 31/32

1 1/2 x 1/2 0.40 5/8 29/32

2 x 1 1/4 0.86 7/8 11/4

2 x 1 0.78 3/4 11/4

2 x 3/4 0.69 19/32 11/4

2 1/2 x 2 2.16 11/4 11/2

3 x 2 1/2 2.26 111/16 11/2

3 x 2 2.68 13/8 19/16

4 x 3 5.18 129/32 215/32

607-I 90° Elbow – Intermediate Radius C x C – Wrot APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES

1/2 0.05 19/32 19/32

5/8 0.09 7/8 7/8

3/4 0.14 13/16 13/16

1 0.24 11/16 11/16

607-LT 90° Elbow – Long Radius C x C – Wrot APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES

3/16 O.D. 0.01 13/32 13/32

1/8 0.02 1/2 1/2

5/16 O.D. 0.02 9/16 9/16

1/4 0.02 3/4 3/4

1/4 x 1/8 0.01 19/32 1/2

3/8 0.04 23/32 23/32

1/2 0.07 29/32 29/32

1/2 x 3/8 0.06 13/16 13/16

1/2 x 1/4 0.03 25/32 21/32

5/8 0.11 13/32 13/32

5/8 x 1/2 0.09 11/16 11/16

3/4 0.16 11/8 11/8

3/4 x 5/8 0.13 11/4 13/32

3/4 x 1/2 0.10 11/8 11/16

7/8 0.28 119/32 119/32

1 0.28 17/16 17/16

1 x 3/4 0.20 11/4 11/8

1 x 5/8 0.15 113/32 13/32

1 1/4 0.42 17/8 17/8

1 1/4 x 1 0.33 125/32 11/2

1 1/2 0.66 21/4 21/4

2 1.23 215/16 215/16

2 1/2 2.15 311/16 311/16

2 1/2 x 2 1.53 – – 3 2.93 41/32 41/32

3 1/2 5.63 – – 4 5.96 51/4 51/4

607-2 90° Fitting Elbow – Close Rough Ftg x C – Wrot APPROX. DIM. B DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES

1/8 0.01 7/8 1/2

1/4 0.02 3/4 3/8

3/8 0.03 15/16 1/2

1/2 0.04 31/32 3/8

3/4 0.11 111/32 17/32

1 0.20 13/4 27/32

1 1/4 0.28 23/32 15/16

1 1/2 0.43 211/32 11/32

2 0.82 229/32 13/8

2 1/2 1.39 315/32 129/32

3 2.09 313/16 23/32

4 4.00 43/4 225/32

607-2-I 90° Fitting Elbow – Intermediate Radius Ftg x C – Wrot APPROX. DIM. B DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES

1/2 0.05 15/32 19/32

5/8 0.09 19/16 7/8

3/4 0.14 15/8 13/16

1 0.24 21/32 11/16



www.nibco.com


www.nibco.com13

Revision 5/9/2013


607-2-LT 90° Fitting Elbow – Long Radius Ftg x C – Wrot APPROX. DIM. B DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES

1/8 0.01 13/16 1/2

1/4 0.02 11/8 3/4

3/8 0.05 11/8 7/8

1/2 0.08 19/16 13/32

1/2 x 3/8 0.06 13/16 3/4

5/8 0.11 125/32 13/32

3/4 0.16 115/16 11/8

1 0.32 21/2 121/32

1 1/4 0.47 231/32 17/8

1 1/2 0.66 313/32 21/4

2 1.27 411/32 215/16

2 1/2 2.16 57/32 311/16

3 3.10 53/4 41/32

4 7.80 – –

607-2-2 90° Fitting Elbow – Close Rough Ftg x Ftg – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

1/2 0.04 11/16

3/4 0.09 115/32

1 0.20 123/32

1 1/4 0.31 21/8

1 1/2 0.46 211/32

2 0.82 227/32

3 2.12 37/8

�ELBOWS continued

607-2-2-LT 90° Fitting Elbow – Long Radius Ftg x Ftg – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

1/4 0.02 27/32

3/8 0.04 11/8

1/2 0.08 119/32

5/8 0.11 125/32

3/4 0.16 115/16

1 0.31 21/2

1 1/4 0.43 229/32

1 1/2 0.65 37/16

2 1.25 411/32

707-2-4 90° Fitting Elbow Ftg x M – Cast APPROX. DIM. B DIM. E NOM. SIZE NET WT./LBS. INCHES INCHES

1/2 0.13 11/16 13/32

707-3 90° Elbow C x F – Cast APPROX. DIM. C DIM. E NOM. SIZE NET WT./LBS. INCHES INCHES

1/4 0.06 13/32 9/16

3/8 0.09 7/16 11/16

3/8 x 1/2 0.13 9/16 13/16

1/2 0.14 9/16 27/32

1/2 x 1/4 0.10 3/8 23/32

1/2 x 3/8 0.09 9/16 25/32

1/2 x 3/4 0.18 11/16 15/16

3/4 0.25 11/16 31/32

3/4 x 1/2 0.20 9/16 15/16

3/4 x 1 0.36 13/16 11/8

1 0.47 25/32 11/4

1 x 1/2 0.32 9/16 11/8

1 x 3/4 0.40 11/16 13/16

1 1/4 0.67 1 11/2

1 1/4 x 3/4 0.47 9/16 111/16

1 1/2 0.90 11/8 15/8

2 1.46 13/8 115/16

707-3-5 90° Drop Elbow C x F – Cast NOM. APPROX. DIM. A DIM. C DIM. E SIZE NET WT./LBS. INCHES INCHES INCHES

3/8 0.12 11/32 7/16 11/16

3/8 x 1/2 0.18 11/32 9/16 13/16

1/2 0.18 13/32 9/16 27/32

1/2 x 3/8 0.17 3/8 9/16 25/32

3/4 0.32 7/32 11/16 31/32

3/4 x 1/2 0.24 17/32 9/16 15/16

1 0.49 5/8 25/32 11/4



www.nibco.com


www.nibco.com14

Revision 5/9/2013

707-6 90° Union Elbow C x C – Cast APPROX. DIM. A DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES

3/8 0.17 13/16 5/16

1/2 0.25 15/16 7/16

3/4 0.39 117/32 9/16

1 0.64 121/32 23/32

1 1/4 0.94 119/32 23/32

708 90° Flanged Sink Elbow C x F – Cast NOM. APPROX. DIM. A DIM. C DIM. F SIZE NET WT./LBS. INCHES INCHES INCHES

1/2 0.21 7/8 9/16 13/4

764 90° Double Elbow C x C x C – Cast APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES

1 x 3/4 x 3/4 0.33 3/4 21/32

�ELBOWS continued


707-3-5-A 90° Hy-Set Elbow C x F – Cast APPROX. DIM. C DIM. E NOM. SIZE NET WT./LBS. INCHES INCHES

1/2 0.20 9/16 27/32

707-3-6 90° Union Elbow C x F – Cast APPROX. DIM. A DIM. E NOM. SIZE NET WT./LBS. INCHES INCHES

1/2 0.31 11/16 7/8

3/4 0.48 111/32 1 1 0.77 11/2 11/4

707-4 90° Elbow C x M – Cast APPROX. DIM. C DIM. E NOM. SIZE NET WT./LBS. INCHES INCHES

3/8 0.08 5/16 7/8

1/2 0.14 7/16 19/32

1/2 x 3/8 0.10 5/16 15/16

1/2 x 3/4 0.19 9/16 15/32

3/4 0.25 9/16 115/32

3/4 x 1/2 0.18 7/16 15/16

3/4 x 1 0.33 21/32 113/32

1 0.43 23/32 15/8

1 1/4 0.55 7/8 2 1 1/2 0.81 1 23/16

2 1.38 111/16 29/32

707-4-6 90° Union Elbow C x M – Cast APPROX. DIM. A DIM. E NOM. SIZE NET WT./LBS. INCHES INCHES

3/8 0.20 15/16 13/16

1/2 0.30 15/16 11/2

3/4 0.49 17/32 113/16

1 0.71 111/32 15/8

1 1/4 1.09 121/32 111/16

707-5 90° Drop Elbow C x C – Cast APPROX. DIM. A DIM. C NOM. SIZE NET WT./LBS. INCHES INCHES

1/2 0.13 13/32 7/16

3/4 0.24 17/32 9/16

707-5-A 90° Hy-Set Elbow C x C – Cast NOM. APPROX. DIM. A DIM. C DIM. D SIZE NET WT./LBS. INCHES INCHES INCHES

1/2 0.13 15/16 7/16 7/16

3/4 0.21 15/16 9/16 9/16



www.nibco.com


www.nibco.com15

Revision 5/9/2013


�FITTING REDUCERS APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

4 x 2 1.66 313/32

4 x 2 1/2 1.83 31/32

4 x 3 2.00 31/32

4 x 3 1/2 2.09 25/8

5 x 2 2.73 411/16

5 x 2 1/2 2.75 419/32

5 x 3 2.76 45/16

5 x 4 3.08 313/16

6 x 2 4.20 523/32

6 x 2 1/2 4.32 55/8

6 x 3 4.38 57/16

6 x 4 4.68 415/16

6 x 5 5.12 415/32

8 x 2 12.12 77/16

8 x 2 1/2 11.42 73/16

8 x 3 10.64 615/16

8 x 4 11.11 67/16

8 x 5 10.35 515/16

8 x 6 11.33 515/32

741 Companion Flange C – Cast NOM. APPROX. DIM. B DIM. F DIM. G DIM. W SIZE NET WT./LBS. INCHES INCHES INCHES INCHES

1/2 0.56 1/8 31/2 7/32 23/8

3/4 0.71 1/8 37/8 7/32 23/4

1 1.27 1/8 41/4 1/4 31/8

1 1/4 1.42 1/8 45/8 1/4 31/2

1 1/2 1.82 1/8 5 5/16 37/8

2 2.76 1/8 6 3/8 43/4

2 1/2 4.29 1/8 7 3/8 51/2

3 5.26 1/8 71/2 7/16 6 4 7.35 1/8 9 7/16 71/2

5 9.04 1/8 10 7/16 81/2

6 12.68 1/8 11 1/2 91/2

NOTE: Dim. B = Tube Stop to Flange Face

600-2 Fitting Reducer Ftg x C – Wrot APPROX. DIM. B NOM. SIZE NET WT./LBS. INCHES

1/4 x 1/8 0.01 17/32

3/8 x 1/8 0.01 23/32

3/8 x 1/4 0.01 19/32

1/2 x 1/4 0.02 27/32

1/2 x 3/8 0.02 11/16

5/8 x 1/4 0.03 11/32

5/8 x 3/8 0.04 31/32

5/8 x 1/2 0.05 7/8

3/4 x 1/4 0.05 13/32

3/4 x 3/8 0.05 11/8

3/4 x 1/2 0.06 11/8

3/4 x 5/8 0.06 15/16

1 x 3/8 0.08 19/32

1 x 1/2 0.09 11/4

1 x 5/8 0.09 13/8

1 x 3/4 0.10 17/32

1 1/4 x 1/2 0.13 13/8

1 1/4 x 3/4 0.16 11/2

1 1/4 x 1 0.15 15/16

1 1/2 x 1/2 0.16 119/32

1 1/2 x 3/4 0.20 117/32

1 1/2 x 1 0.21 15/8

1 1/2 x 1 1/4 0.23 113/32

2 x 1/2 0.34 115/16

2 x 3/4 0.34 127/32

2 x 1 0.35 127/32

2 x 1 1/4 0.34 23/32

2 x 1 1/2 0.39 131/32

2 1/2 x 1 0.51 29/32

2 1/2 x 1 1/4 0.60 29/32

2 1/2 x 1 1/2 0.59 23/8

2 1/2 x 2 0.65 131/32

3 x 1 1/4 0.88 31/4

3 x 1 1/2 0.81 219/32

3 x 2 0.99 29/16

3 x 2 1/2 1.03 21/4

3 1/2 x 3 1.48 211/32

Continues…

�FLANGES – CLASS 125

�FLANGES – CLASS 150

771 Companion Flange C – Cast NOM. APPROX. DIM. B DIM. F DIM. G DIM. W SIZE NET WT./LBS. INCHES INCHES INCHES INCHES

3/4 1.15 1/8 37/8 11/32 23/4

1 1.59 1/8 41/4 3/8 31/8

1 1/4 1.91 1/8 45/8 13/32 31/2

1 1/2 2.57 1/8 5 7/16 37/8

2 4.10 1/8 6 1/2 43/4

2 1/2 6.34 1/8 7 9/16 51/2

3 8.31 1/8 71/2 5/8 6 4 11.85 1/8 9 11/16 71/2

5 15.69 1/8 10 3/4 81/2

6 19.12 1/8 11 13/16 91/2

NOTE: Dim. B = Tube Stop to Flange Face

775 Threaded Companion Flange F – Cast NOM. APPROX. DIM. E DIM. F DIM. W SIZE NET WT./LBS. INCHES INCHES INCHES

2 4.13 1 6 43/4

2 1/2 6.43 13/16 7 51/2

3 7.13 13/16 71/2 6 4 11.47 15/16 9 71/2



www.nibco.com


www.nibco.com16

Revision 9/12/2011

623 Copper Hanger Strap APPROX. SIZE NET WT./LBS.

3/4" Wide x 25 Ft. Roll 1.93

624 Tube Strap APPROX. NOM. SIZE NET WT./LBS.

1/8 0.01 1/4 0.01 3/8 0.01 1/2 0.02 5/8 0.02 3/4 0.02 1 0.02 1 1/4 0.03 1 1/2 0.03 2 0.04 724-5-A Hy-Set Hanger C – Cast APPROX. DIM. C DIM. D NOM. SIZE NET WT./LBS. INCHES INCHES

1/2 0.05 23/32 15/8

3/4 0.09 27/32 15/8

1 0.13 1 15/8


�PLUGS

616 Fitted Plug Ftg - Wrot APPROX. DIM. A NOM. SIZE NET WT./LBS. INCHES

3/8 0.012 1/16

1/2 0.02 3/32

3/4 0.05 5/32

638 Return Bend C x C – Wrot APPROX. DIM. E DIM. J NOM. SIZE NET WT./LBS. INCHES INCHES

1/8 0.02 21/32 1 1/4 0.04 31/32 11/4

3/8 0.08 13/32 11/2

1/2 0.13 11/2 2 3/4 0.26 119/32 21/2

1 0.44 23/32 3 1 1/4 0.70 213/16 4 1 1/2 1.04 35/32 41/2

2 1.92 329/32 51/2

739 Return Bend – Closed C x C – Cast APPROX. DIM. E DIM. J NOM. SIZE NET WT./LBS. INCHES INCHES

3/4 0.29 15/32 15/16

�RETURN BENDS

�STRAPS & HANGERS

TEES

705 Baseboard Tee C x F x C – Cast APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. C D E

1/2 x 1/8 x 3/4 0.15 7/16 9/16 11/16

1/2 x 1/8 x 1/2 0.11 7/16 7/16 9/16

3/4 x 1/8 x 1 0.30 5/8 3/4 13/16

3/4 x 1/8 x 3/4 0.19 9/16 9/16 11/16

1 x 1/8 x 1 0.32 23/32 23/32 9/16

1 1/4 x 1/8 x 1 1/4 0.51 7/8 7/8 15/16

705-D Vent Elbow C x C – Cast APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. C D S

1/2 0.10 7/16 7/16 11/16

3/4 0.20 9/16 9/16 13/16

1 0.31 23/32 23/32 15/16



www.nibco.com


www.nibco.com17

Revision 10/31/2011


TEES continued

710-3 Tee F x F x C – Cast APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. C E S

1/2 0.20 9/16 7/8 7/8

3/4 0.37 11/16 1 1 3/4 x 1/2 x 1/2 0.26 11/16 31/32 7/8

3/4 x 1/2 x 3/4 0.30 11/16 1 15/16

3/4 x 3/4 x 1/2 0.31 11/16 31/32 31/32

710-3-4 Tee M x F x C – Cast APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. C E S

3/4 0.32 11/16 111/32 1 3/4 x 3/4 x 1/2 0.33 5/8 115/16 19/16

611 Tee C x C x C – Wrot APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. C F G

3/16 O.D. 0.01 7/32 7/32 7/32

1/8 0.02 15/16 15/16 1/4

1/8 x 1/8 x 1/4 0.02 13/32 13/32 9/32

1/8 x 1/8 x 3/16 O.D. 0.01 5/16 5/16 5/16

1/8 x 3/16 O.D. x 1/8 0.01 5/16 11/32 1/4

5/16 O.D. 0.02 3/8 3/8 5/16

5/16 O.D. x 1/8 x 1/8 0.02 3/8 13/32 11/32

5/16 O.D. x 1/8 x 5/16 O.D. 0.02 3/8 13/32 5/16

5/16 O.D. x 5/16 O.D. x 1/8 0.03 3/8 3/8 5/16

5/16 O.D. x 5/16 O.D. x 1/4 0.02 3/8 3/8 9/32

1/4 0.02 5/16 5/16 1/4

1/4 x 1/8 x 1/8 0.02 5/16 13/32 11/32

1/4 x 1/8 x 1/4 0.02 5/16 13/32 9/32

1/4 x 5/16 O.D. x 1/4 0.02 5/16 3/8 9/32

1/4 x 1/4 x 1/8 0.03 5/16 5/16 5/16

1/4 x 1/4 x 3/8 0.04 17/32 17/32 11/32

1/4 x 1/4 x 1/2 0.07 19/32 19/32 3/8

1/4 x 1/4 x 3/16 O.D. 0.02 5/16 5/16 7/16

1/4 x 1/4 x 5/16 O.D. 0.02 5/16 5/16 5/16

3/8 0.04 11/32 11/32 11/32

3/8 x 1/8 x 1/8 0.04 11/32 19/32 19/32

3/8 x 1/8 x 3/8 0.04 11/32 19/32 11/32

3/8 x 1/4 x 1/8 0.04 11/32 17/32 9/16

3/8 x 1/4 x 1/4 0.04 11/32 17/32 15/32

3/8 x 1/4 x 3/8 0.04 11/32 17/32 11/32

3/8 x 3/8 x 1/8 0.04 11/32 11/32 9/16

3/8 x 3/8 x 5/16 O.D. 0.04 11/32 11/32 15/32

3/8 x 3/8 x 1/4 0.04 11/32 11/32 15/32

3/8 x 3/8 x 1/2 0.07 17/32 17/32 3/8

1/2 0.06 11/32 11/32 11/32

1/2 x 1/4 x 3/8 0.06 5/16 5/8 13/32

1/2 x 3/8 x 1/4 0.06 5/16 17/32 9/16

1/2 x 3/8 x 3/8 0.06 5/16 17/32 1/2

1/2 x 3/8 x 1/2 0.07 7/16 17/32 3/8

1/2 x 1/2 x 1/8 0.06 1/4 1/4 11/16

1/2 x 1/2 x 1/4 0.06 5/16 5/16 9/16

1/2 x 1/2 x 3/8 0.07 5/16 5/16 13/32

1/2 x 1/2 x 5/8 0.11 5/8 5/8 7/16

1/2 x 1/2 x 3/4 0.12 17/32 17/32 11/32

1/2 x 1/2 x 1 0.29 1 1 21/32

Continues…

APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. C F G

5/8 0.12 7/16 7/16 7/16

5/8 x 3/8 x 3/8 0.11 7/16 3/4 5/8

5/8 x 3/8 x 5/8 0.10 7/16 3/4 7/16

5/8 x 1/2 x 1/2 0.11 7/16 19/32 13/32

5/8 x 1/2 x 5/8 0.10 7/16 5/8 7/16

5/8 x 5/8 x 1/4 0.11 7/16 7/16 3/4

5/8 x 5/8 x 3/8 0.09 7/16 7/16 5/8

5/8 x 5/8 x 1/2 0.11 7/16 7/16 13/32

5/8 x 5/8 x 3/4 0.15 23/32 23/32 1/2

3/4 0.16 7/16 7/16 7/16

3/4 x 3/8 x 3/8 0.12 7/16 23/32 21/32

3/4 x 3/8 x 1/2 0.12 7/16 23/32 17/32

3/4 x 3/8 x 3/4 0.15 17/32 27/32 1/2

3/4 x 1/2 x 3/8 0.12 7/16 21/32 21/32

3/4 x 1/2 x 1/2 0.12 13/32 19/32 1/2

3/4 x 1/2 x 3/4 0.16 1/2 5/8 15/32

3/4 x 5/8 x 5/8 0.15 1/2 3/4 11/16

3/4 x 5/8 x 3/4 0.15 17/32 11/16 1/2

3/4 x 3/4 x 1/8 0.12 7/16 7/16 13/16

3/4 x 3/4 x 1/4 0.12 13/32 13/32 25/32

3/4 x 3/4 x 3/8 0.12 13/32 13/32 21/32

3/4 x 3/4 x 1/2 0.12 3/8 3/8 15/32

3/4 x 3/4 x 5/8 0.16 17/32 17/32 11/16

3/4 x 3/4 x 1 0.22 23/32 23/32 1/2

7/8 0.30 23/32 23/32 23/32

1 0.31 11/16 11/16 21/32

1 x 1/2 x 1/2 0.22 1/2 25/32 11/16

1 x 1/2 x 3/4 0.24 9/16 7/8 11/16

1 x 1/2 x 1 0.30 11/16 11/32 21/32

1 x 3/4 x 1/2 0.22 15/32 11/16 11/16

1 x 3/4 x 3/4 0.24 9/16 25/32 23/32

1 x 3/4 x 1 0.31 11/16 31/32 21/32

1 x 1 x 1/4 0.22 1/2 1/2 13/16

1 x 1 x 3/8 0.22 1/2 1/2 29/32

1 x 1 x 1/2 0.23 1/2 1/2 11/16

1 x 1 x 5/8 0.24 19/32 19/32 29/32

1 x 1 x 3/4 0.25 19/32 19/32 23/32

1 x 1 x 1 1/4 0.42 15/32 15/32 7/8

1 x 1 x 1 1/2 0.59 111/32 111/32 31/32

Continues…

NOTE: Tee sizes are read Run x Run x Outlet.



www.nibco.com


www.nibco.com18

Revision 10/31/2011


1 1/4 0.43 13/16 13/16 13/16

1 1/4 x 1/2 x 1 1/4 0.42 13/16 17/32 13/16

1 1/4 x 3/4 x 1/2 0.31 15/32 3/4 25/32

1 1/4 x 3/4 x 3/4 0.36 21/32 15/16 3/4

1 1/4 x 3/4 x 1 0.45 25/32 11/16 29/32

1 1/4 x 3/4 x 1 1/4 0.41 13/16 11/8 13/16

1 1/4 x 1 x 1/2 0.31 15/32 19/32 13/16

1 1/4 x 1 x 3/4 0.37 21/32 13/16 25/32

1 1/4 x 1 x 1 0.47 25/32 31/32 29/32

1 1/4 x 1 x 1 1/4 0.41 13/16 11/32 13/16

1 1/4 x 1 1/4 x 3/8 0.30 15/32 15/32 29/32

1 1/4 x 1 1/4 x 1/2 0.31 15/32 15/32 25/32

1 1/4 x 1 1/4 x 3/4 0.39 21/32 21/32 3/4

1 1/4 x 1 1/4 x 1 0.45 25/32 25/32 27/32

1 1/4 x 1 1/4 x 1 1/2 0.57 13/16 13/16 29/32

1 1/4 x 1 1/4 x 2 1.04 115/16 115/16 11/4

1 1/2 0.62 15/16 15/16 15/16

1 1/2 x 1/2 x 1 1/2 0.60 11/32 113/32 31/32

1 1/2 x 3/4 x 1/2 0.39 1/2 29/32 11/32

1 1/2 x 3/4 x 3/4 0.47 19/32 13/32 29/32

1 1/2 x 3/4 x 1 0.54 25/32 11/4 11/32

1 1/2 x 3/4 x 1 1/4 0.60 29/32 111/32 11/16

1 1/2 x 3/4 x 1 1/2 0.59 15/16 13/8 15/16

1 1/2 x 1 x 1/2 0.39 1/2 25/32 11/32

1 1/2 x 1 x 3/4 0.46 11/16 31/32 15/16

1 1/2 x 1 x 1 0.54 3/4 11/16 31/32

1 1/2 x 1 x 1 1/4 0.60 29/32 11/8 11/16

1 1/2 x 1 x 1 1/2 0.60 11/32 111/32 29/32

1 1/2 x 1 1/4 x 1/2 0.41 1/2 25/32 11/32

1 1/2 x 1 1/4 x 3/4 0.46 19/32 29/32 15/16

1 1/2 x 1 1/4 x 1 0.54 25/32 1 11/32

1 1/2 x 1 1/4 x 1 1/4 0.59 31/32 13/32 31/32

1 1/2 x 1 1/4 x 1 1/2 0.60 11/32 13/16 29/32

1 1/2 x 1 1/2 x 1/2 0.40 1/2 1/2 1 1 1/2 x 1 1/2 x 3/4 0.48 19/32 19/32 15/16

1 1/2 x 1 1/2 x 1 0.55 3/4 3/4 15/16

1 1/2 x 1 1/2 x 1 1/4 0.61 29/32 29/32 1 1 1/2 x 1 1/2 x 2 1.05 111/16 111/16 11/4

Continues…


2 1.11 19/32 19/32 11/32

2 x 1/2 x 2 1.09 19/32 23/8 11/4

2 x 3/4 x 2 1.07 19/32 23/16 11/4

2 x 1 x 1 0.91 27/32 119/32 111/32

2 x 1 x 2 1.06 11/8 125/32 11/4

2 x 1 1/4 x 3/4 1.04 11/4 131/32 23/32

2 x 1 1/4 x 1 0.90 27/32 19/32 123/64

2 x 1 1/4 x 1 1/4 1.06 17/32 2 115/16

2 x 1 1/4 x 1 1/2 1.04 13/32 17/32 13/8

2 x 1 1/4 x 2 1.08 19/32 131/32 11/32

2 x 1 1/2 x 1/2 0.79 11/16 29/32 15/16

2 x 1 1/2 x 3/4 1.04 11/4 123/32 23/32

2 x 1 1/2 x 1 0.91 29/32 11/8 17/32

2 x 1 1/2 x 1 1/4 1.07 115/16 125/32 17/8

2 x 1 1/2 x 1 1/2 1.06 13/32 115/32 111/32

2 x 1 1/2 x 2 1.07 19/32 125/32 11/32

2 x 2 x 1/2 0.77 19/32 19/32 15/16

2 x 2 x 3/4 0.66 7/16 7/16 11/4

2 x 2 x 1 0.91 27/32 27/32 11/4

2 x 2 x 1 1/4 1.09 19/32 19/32 127/32

2 x 2 x 1 1/2 1.07 11/4 11/4 123/32

2 x 2 x 2 1/2 2.11 23/16 23/16 17/8

2 1/2 2.08 19/16 19/16 17/8

2 1/2 x 3/4 x 2 1/2 2.16 19/16 215/16 17/8

2 1/2 x 1 x 2 1/2 2.22 19/16 29/16 17/8

2 1/2 x 1 1/4 x 2 2.26 19/16 25/8 23/16

2 1/2 x 1 1/4 x 2 1/2 2.20 19/16 25/8 17/8

2 1/2 x 1 1/2 x 2 1/2 2.20 19/16 217/32 17/8

2 1/2 x 2 x 3/4 1.34 25/32 13/16 127/32

2 1/2 x 2 x 1 1.34 25/32 15/32 111/16

2 1/2 x 2 x 1 1/4 1.62 13/32 113/32 127/32

2 1/2 x 2 x 1 1/2 1.61 13/32 213/32 121/32

2 1/2 x 2 x 2 1.72 17/16 111/16 19/16

2 1/2 x 2 x 2 1/2 2.20 19/16 23/16 17/8

2 1/2 x 2 1/2 x 1/2 1.30 25/32 25/32 21/8

2 1/2 x 2 1/2 x 3/4 1.28 25/32 25/32 113/16

2 1/2 x 2 1/2 x 1 1.26 25/32 25/32 111/16

2 1/2 x 2 1/2 x 1 1/4 1.58 13/32 13/32 127/32

2 1/2 x 2 1/2 x 1 1/2 1.58 13/32 13/32 121/32

2 1/2 x 2 1/2 x 2 1.70 113/32 113/32 119/32

Continues…


3 3.12 17/8 17/8 21/32

3 x 3/4 x 3 3.28 113/16 31/4 23/16

3 x 1 x 3 3.34 113/16 31/4 23/16

3 x 1 1/4 x 3 3.28 113/16 27/8 23/16

3 x 1 1/2 x 3 3.31 113/16 229/32 23/16

3 x 2 x 2 2.34 115/32 131/32 131/32

3 x 2 x 2 1/2 3.18 113/16 225/32 21/2

3 x 2 x 3 3.31 113/16 221/32 23/16

3 x 2 1/2 x 1 3.08 113/16 215/32 31/4

3 x 2 1/2 x 1 1/4 3.07 113/16 215/32 229/32

3 x 2 1/2 x 2 2.34 115/32 127/32 131/32

3 x 2 1/2 x 2 1/2 3.21 113/16 215/32 21/2

3 x 2 1/2 x 3 3.35 113/16 215/32 33/16

3 x 3 x 1/2 1.94 27/32 27/32 23/8

3 x 3 x 3/4 1.94 27/32 27/32 23/16

3 x 3 x 1 1.88 27/32 27/32 15/16

3 x 3 x 1 1/4 2.44 115/32 115/32 27/16

3 x 3 x 1 1/2 2.40 115/32 115/32 29/32

3 x 3 x 2 2.32 115/32 115/32 131/32

3 x 3 x 2 1/2 3.34 113/16 113/16 21/2

3 1/2 6.57 217/32 217/32 217/32

4 7.89 213/32 213/32 217/32

4 x 1 x 4 7.58 23/8 41/4 223/32

4 x 2 x 2 7.62 23/8 4 315/16

4 x 2 x 4 7.86 23/8 4 223/32

4 x 2 1/2 x 2 1/2 7.52 23/8 325/32 329/32

4 x 2 1/2 x 4 7.84 23/8 325/32 223/32

4 x 3 x 2 7.50 23/8 39/16 315/16

4 x 3 x 2 1/2 7.42 23/8 39/16 329/32

4 x 3 x 3 7.43 23/8 39/16 31/2

4 x 3 x 4 7.76 23/8 323/32 223/32

4 x 4 x 1/2 4.42 13/32 13/32 27/8

4 x 4 x 3/4 4.17 13/32 13/32 229/32

4 x 4 x 1 4.45 31/32 31/32 29/16

4 x 4 x 1 1/4 4.60 111/32 111/32 27/8

4 x 4 x 1 1/2 4.50 19/32 19/32 23/4

4 x 4 x 2 4.98 111/32 111/32 27/16

4 x 4 x 2 1/2 7.78 23/8 23/8 329/32

4 x 4 x 3 7.77 23/8 23/8 31/2

Continued on next page.


611 Tee C x C x C – Wrot continued

TEES continued




www.nibco.com


www.nibco.com19

Revision 9/12/2011

611-HE Heat Exchanger Tee C x C x C – Wrot

Tube slips entirely through fitting on small end of run. Sizes same as listed under 611 where tee has one or more reductions on one end of run.

711 Tee C x C x C – Cast APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. C F G

1 1/4 x 1/2 x 1/2 0.50 5/8 27/32 1/2

1 1/4 x 1/2 x 1 0.48 3/4 3/4 3/8

1 1/2 x 1/2 x 1 1/4 0.70 7/8 31/32 1/2

2 x 3/4 x 3/4 0.82 21/32 7/8 1/2

2 x 1 x 1 1/2 1.23 1 11/4 5/8

2 x 2 x 3 3.11 121/32 121/32 13/16

2 1/2 x 1/2 x 2 1/2 2.46 11/2 27/32 1/2

2 1/2 x 1 1/2 x 1 1/2 1.76 1 17/32 7/8

2 1/2 x 1 1/2 x 2 2.02 11/4 115/32 7/8

2 1/2 x 2 1/2 x 3 2.98 13/4 13/4 113/32

3 x 2 x 1 1/2 2.63 1 11/4 15/32

3 x 2 1/2 x 1 1/2 2.53 1 13/32 113/32

3 x 3 x 4 6.96 211/32 211/32 123/32

4 x 2 x 2 4.64 11/4 13/4 25/32

711-A Supply and Return Tee C x C x C – Cast APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. C J

1/2 0.17 13/16 1

TEES continued


611 Tee C x C x C – Wrot continued APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. C F G

5 8.29 227/32 227/32 313/32

5 x 2 x 5 9.47 227/32 529/32 313/32

5 x 4 x 4 8.18 21/4 417/32 33/8

5 x 4 x 5 8.58 227/32 429/32 313/32

5 x 5 x 1 4.20 23/32 23/32 33/16

5 x 5 x 1 1/4 4.76 17/32 17/32 33/16

5 x 5 x 1 1/2 4.88 11/32 11/32 33/16

5 x 5 x 2 5.30 19/32 19/32 33/16

5 x 5 x 2 1/2 5.91 15/8 15/8 33/16

5 x 5 x 3 5.91 125/32 125/32 33/16

5 x 5 x 4 7.10 29/32 29/32 33/16

6 13.50 39/32 39/32 41/32

6 x 4 x 1 1/2 9.62 13/16 327/32 311/16

6 x 4 x 4 11.37 29/32 53/32 311/16

6 x 4 x 6 16.60 39/32 65/32 41/32

6 x 6 x 1/2 7.17 15/16 15/16 411/16

6 x 6 x 3/4 7.19 15/16 15/16 421/32

6 x 6 x 1 7.18 15/16 15/16 311/16

6 x 6 x 1 1/4 6.67 29/32 29/32 311/16

6 x 6 x 1 1/2 6.87 1 1 311/16

6 x 6 x 2 7.78 19/32 19/32 311/16

6 x 6 x 2 1/2 8.12 117/32 117/32 33/4

6 x 6 x 3 8.92 125/32 125/32 311/16

6 x 6 x 4 10.17 29/32 29/32 311/16

6 x 6 x 5 11.67 225/32 225/32 41/32

8 36.81 417/32 417/32 51/32

8 x 8 x 2 18.02 19/32 19/32 43/4

8 x 8 x 2 1/2 19.02 117/32 117/32 43/4

8 x 8 x 3 20.02 125/32 125/32 43/4

8 x 8 x 4 22.26 29/32 29/32 41/2

8 x 8 x 5 24.90 225/32 225/32 415/16

8 x 8 x 6 27.86 39/32 39/32 51/8


611-2 Fitting Tee C x Ftg x C – Wrot APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. B C F

1/2 0.07 11/32 3/8 15/32

3/4 0.15 113/32 1/2 1/2

711-5 Drop Tee C x C x C – Cast APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. A C

1/2 0.16 3/8 7/16



www.nibco.com


www.nibco.com20

Revision 5/9/2013

712 Tee C x C x F – Cast APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. E F G

1/4 0.08 13/16 9/32 9/32

3/8 0.11 11/16 7/16 7/16

3/8 x 3/8 x 1/4 0.12 11/16 7/16 7/16

1/2 0.14 27/32 9/16 9/16

1/2 x 1/2 x 1/4 0.16 13/16 1/2 1/2

1/2 x 1/2 x 3/8 0.15 13/16 1/2 1/2

1/2 x 1/2 x 3/4 0.23 15/16 11/16 11/16

3/4 0.33 1 21/32 21/32

3/4 x 1/2 x 3/4 0.28 1 21/32 11/16

3/4 x 3/4 x 3/8 0.23 7/8 1/2 1/2

3/4 x 3/4 x 1/2 0.24 29/32 9/16 9/16

3/4 x 3/4 x 1 0.40 11/8 7/8 7/8

1 0.54 11/4 7/8 7/8

1 x 1 x 1/2 0.35 11/8 9/16 9/16

1 x 1 x 3/4 0.42 13/16 11/16 11/16

1 1/4 0.76 17/16 1 1 1 1/4 x 1 1/4 x 1/2 0.49 11/4 9/16 9/16

1 1/4 x 1 1/4 x 3/4 0.55 15/16 11/16 11/16

1 1/4 x 1 1/4 x 1 0.66 17/16 7/8 7/8

1 1/2 1.08 15/8 11/8 11/8

1 1/2 x 1 1/2 x 1/2 0.62 13/8 9/16 9/16

1 1/2 x 1 1/2 x 3/4 0.70 17/16 11/16 11/16

1 1/2 x 1 1/2 x 1 0.79 11/2 13/16 13/16

2 1.74 17/8 13/8 13/8

2 x 2 x 1/2 0.97 15/8 17/32 17/32

2 x 2 x 3/4 1.10 111/16 11/16 11/16

2 x 2 x 1 1.23 13/4 13/16 13/16

712-5 Drop Tee C x C x F – Cast APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. A C E

1/2 0.25 3/8 9/16 7/8

3/4 0.38 1/2 11/16 1

713 Tee C x C x M – Cast APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. E F

1/2 0.14 13/32 7/16

3/4 0.29 19/32 9/16

714 Tee C x F x C – Cast APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. C E S

1/2 0.18 7/16 3/8 7/8

1/2 x 3/4 x 1/2 0.27 7/16 9/16 13/16

3/4 0.31 9/16 11/16 1 3/4 x 1/2 x 3/4 0.26 9/16 7/16 15/16

1 0.52 23/32 13/16 11/4

1 x 1/2 x 1 0.42 3/4 3/4 11/8

1 x 3/4 x 1 0.43 23/32 23/32 13/16

1 1/4 0.73 7/8 1 113/32

1 1/4 x 1/2 x 1 1/4 0.56 7/8 7/8 13/16

1 1/4 x 3/4 x 1 1/4 0.62 7/8 7/8 17/32

1 1/2 1.00 1 11/8 19/16

1 1/2 x 3/4 x 1 1/2 0.88 1 1 113/16

2 1.72 11/4 13/8 17/8

2 x 1/2 x 2 1.58 11/4 11/4 2 2 x 3/4 x 2 1.57 11/4 11/4 2

TEES continued


�TRAPS

698 Suction Line P-Trap C x C – WrotA major application of this fitting is on the suction line of a refregeration compressor. The line is looped, by use of the Suction Line P-Trap, to the floor prior to being run vertically upwards to prevent the drainage of oil back to the compressor during shut down periods. Additional P-Traps are used for each 20' or riser pipe. this prevents high velocity build-up as the oil or liquid begins to return to the compressor during this shut down period. APPROX. DIMENSIONS NET WT. INCHES NOM. SIZE LBS. C D J K

1/2 0.40 53/8 3 3 6 5/8 0.45 53/8 27/8 3 6 3/4 0.58 53/8 23/4 3 6 1 0.92 51/4 221/32 231/32 63/8

1 1/4 1.51 517/32 31/32 33/4 61/4

1 1/2 2.74 729/32 325/32 5 825/32

2 4.05 89/32 329/32 6 913/32


Product Features• Rated 6 DFU’s for venting DWV 2" and smaller• Includes 1-1/2” polypropylene tubular adapter• Unique technology opens at -0.01 psi and seals at 0 psi and above• Screening on air inlets to guard the seal• Protective rubber sleeve provides grip for installation and keeps valve free from debris• 100% functionally tested at 1/4" H20 and 30" H20 ensuring trouble free performance• Limited Lifetime Warranty

Model NumbersPFAAV6T 6 DFU AAV with 1-1/2 white tubular AdapterPFAAV6TA 6 DFU AAV with 1-1/2 black tubular Adapter

General SpecificationsAn air admittance valve shall be acceptable as a vent termination for any individual vent, common vent, circuit vent, loop vent, island fixture vent, vent stack or stack vent that is provided to prevent siphonage of a fixture trap. An air admittance valve is used as an alternative to secondary venting through the roof open to atmosphere.

The purpose of an air admittance valve is to provide a method of allowing air to enter the plumbing drainage system without the use of a vent extended to open air and to prevent sewer gases from escaping into a building. An air admittance valve is a one way valve designed to allow air to enter the plumbing drainage system when negative pressures develop in the piping system. The device shall close by gravity and seal the vent terminal at zero differential pressure (no flow conditions) and under positive internal pressures.

Product Location Specifications• Should be located a minimum of 4" above the weir of fixture

trap for single fixture and branch venting and 6" above flood level of highest fixture for stack venting

• Each valve should be installed in an accessible location

Installation• Read installation instructions prior to use of this product. Always consult local plumbing codes prior to installing an AAV. Individual, branch and circuit vents are permitted to terminate with a connection to an AAV.

• The AAV will only vent fixtures that are on the same floor and connect to a horizontal branch drain. The horizontal branch drain shall connect to the drainage stack a maximum of four branch intervals from the top of the stack. AAV should be located within the maximum developed length permitted for the vent. AAV must be located a minimum of 4 inches above the horizontal board and 6 inches above any insulation material and within 15 degrees of vertical.

• Every structure in which plumbing is installed shall have at least one primary stack vent. The stack vent should run as directly as possible from the building drain through to the open air.

• Apply pipe joint compound or thread seal tape to the male threads of the valve. Remove protective rubber sleeve after installation.

• Valves are intended for installation in the confines of a structure, cannot be exposed to outside elements and are intended for use between -400 F and 1500 F. AAVs must be accessible for inspection and service.

PFAAV6T

Air Admittance Valves

Distributed Exclusively by Ferguson and Wolseley Canada

©2011 Ferguson Enterprises, Inc. All Rights Reserved

®

®

DWV

Page 1of 2 OAT 04/11

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.8 - Air Admittance Valve

sotis

Line

sotis

Line

sotis

Text Box

DELETED - PRODUCT WILL NOT BE USED ON PROJECT

NO

NE

RK

FINISHED FLOOR CLEANOUTSWITH "TWIS-TO-FLOOR®" ADJUSTABLE TOPS

ROUND NICKEL BRONZE TOPFUNCTION: For use in finished floors bearing foot and medium load wheeled traffic. Allows for easy floor level adjustment.

REGULARLY FURNISHED: Duco Cast Iron Cleanout with RoundAdjustable Scoriated Secured NickelBronze Top. Closure Plug Type asIndicated By Figure Number Selected.

VARIATIONS: Flashing Flange -FFlange with Flashing Clamp -F-CCarpet Clamping Type -XCarpet Marker Type -YVandal Proof Top -UWide Flange (DX)

OPTIONAL MATERIALS:Galvanized Cast Iron -GPolished Bronze Top -PB

4020 SERIES

4020

SE

RIE

S2-

16-7

0JM

BH

S40

20

(Twis-to-Floor® design shown with gasketed plug.)

NOTE: Dimensions shown inparentheses are in millimeters.

NOTE: For applications using coredrilling, the largest diameter of the cleanout assembly is 6 5/16"(160).

TWIS-TO-FLOOR® ADJUSTMENT

NO-HUB OUTLET

"A" (Pipe Size) = 02(50), 03(75), 04(100) or 05(125)

Fig. 4020S.....Gasket Seal - ABS Plug Fig. 4021S.....Gasket Seal - Bronze Plug Fig. 4023S.....Taper Thread - Bronze Plug Fig. 4024S.....Taper Thread - ABS Plug

REV. DATE DESCRIPTION BY CKD. BY

WEIGHTPOUNDS

VOLUMECUBIC FEET

FIGURE NUMBER

LOCATIONF

IGU

RE

NU

MB

ER

DIM

EN

SIO

NS

AR

E S

UB

JEC

T T

O M

AN

UFA

CT

UR

ER

S T

OLE

RA

NC

E A

ND

CH

AN

GE

WIT

HO

UT

NO

TIC

EW

E C

AN

AS

SU

ME

NO

RE

SP

ON

SIB

ILIT

Y F

OR

US

E O

F S

UP

ER

SE

DE

D O

R V

OID

DAT

A

DR

AW

N B

Y:

CH

EC

KE

D B

Y:

AP

PR

OV

ED

BY

:D

ATE

:S

CA

LE:

SIZ

E AD

RA

WIN

G N

UM

BE

R

4"(100)

Flashing Flange(when specified)

Flashing Clamp(when specified)

Adj. Top and Frame

Min. 3 3/16"(81)Max. 4 3/8"(111)

"C.O." cast in Secured Cover

3 1/2"(89)

5 3/4"(145) DIA.

A9"(230) DIA.

H 10/17/00 New design JJ BSJ 05/03/01 Edited Outlet Text JJ CL

CLK 07/26/02 Corrected Clamp & Flange view JJCLL 12/17/04 Added Core-Drilling Note JJ

L

Plug Size

2 3/16"(56)

JAY R.SMITH MFG. CO.DIVISION OF SMITH INDUSTRIES, INC.POST OFFICE BOX 3237MONTGOMERY, ALABAMA 36109-0237 (USA)TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.comCUSTOMER

DRIVEN

SMITH®

MEMBER OF:

®

ASPE®

SANITARY

E

NGINEERINGPrevention Rather Than C

ure

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.9 B Floor Cleanouts

BS

COUNTERSUNK PLUGFig. 4470T . . . . . . . . . LESS COVER AND SCREWFig. 4472T . . . . . . . . . WITH COVER AND SCREW

NO

NE

RK

CLEANOUT PLUGS AND COVERSTAPER THREAD PLUGWITH ROUND COVER

FUNCTION: Used in Female Pipe Size openings in Drainage piping where a cleanout is required.Countersunk plugs have slot sized to receive 1/2"(13) thick steel bar stock. Face-of-wall cover is desirableon finished walls.

REGULARLY FURNISHED: Cast Bronze Taper Thread Plug withStainless Steel Round Cover andScrew as indicated by Figure Number.

OPTIONAL MATERIALS:Polished Bronze Cover -PBPrime Coated Steel Cover -PCStainless Steel Plug (See Fig. 9775)

4470, 4472

4470

, 447

22-

16-7

0JM

BH

B 7-30-93 Redrawn, Chg Var & update form TWK

S44

70E

VARIATIONS:Longer Screw (Specify Length)"T" Handle Plug -TP Plug tapped 1/4"(6) - 20 ThreadVandal Proof Screw -U

Stainless SteelCover

1/4(6)

1/4(6) - 20 x 2 1/2"(64) LongFlat Head Machine Screw

B DIAA

C 6-15-94 Chg'd Title EMB BSD 7-27-94 Submittal Update EMB

ASIZE

0150(40), 02(50), 0250(65)03(80), 0350(90), 04(100)

05(125)06(150)

08(200), 10(250)

BDIA

4 1/4(110)5 1/2(140)

7(180)9 1/4(235)11 1/4(285)


BSE 1-11-96 Added Millimeters EMB BS


WEIGHTPOUNDS

VOLUMECUBIC FEET

FIGURE NUMBER

LOCATIONF

IGU

RE

NU

MB

ER

DIM

EN

SIO

NS

AR

E S

UB

JEC

T T

O M

AN

UF

AC

TU

RE

RS

TO

LER

AN

CE

AN

D C

HA

NG

E W

ITH

OU

T N

OT

ICE

WE

CA

N A

SS

UM

E N

O R

ES

PO

NS

IBIL

ITY

FO

R U

SE

OF

SU

PE

RS

ED

ED

OR

VO

ID D

AT

A

DR

AW

N B

Y:

CH

EC

KE

D B

Y:

AP

PR

OV

ED

BY

:D

AT

E:

SC

ALE

:S

IZE A

DR

AW

ING

NU

MB

ER


DRIVEN

SMITH®

MEMBER OF:

®

ASPE®

SANITARY

ENGINEERINGPrevention Rather Than C

ure

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.9 E Wall Cleanouts

REV.

D 6-22-05 Rev. Variations/Optional Materials RN AM E 10/01/08 Rev. Figure Number JJ JM F 04/02/09 Rev. Drawing & Added Function JJ CR

DATE DESCRIPTION BY CKD. BY

WEIGHTPOUNDS

VOLUMECUBIC FEET

FIGURE NUMBER

LOCATION

FIG

UR

EN

UM

BE

R

DIM

EN

SIO

NS

AR

E S

UB

JEC

T T

O M

AN

UFA

CT

UR

ER

S T

OLE

RA

NC

E A

ND

CH

AN

GE

WIT

HO

UT

NO

TIC

EW

E C

AN

AS

SU

ME

NO

RE

SP

ON

SIB

ILIT

Y F

OR

US

E O

F S

UP

ER

SE

DE

D O

R V

OID

DAT

A

DR

AW

N B

Y:

CH

EC

KE

D B

Y:

AP

PR

OV

ED

BY

:D

ATE

:S

CA

LE:

SIZ

E AD

RA

WIN

G N

UM

BE

R

ROOF DRAIN AND OVERFLOW DRAIN

REGULARLY FURNISHED:Duco Cast Iron Bodies with Combined Flashing Clamp and Gravel Stop for Roof Drain and Combined Flashing Clamp and Gravel Stop with 3 1/2(89) HighInternal Water Dam Standpipe for Overflow Drain. Deck Plate with Securing Holes Provided to receive both Drains. Both Drains Provided with Polyethylene Domes.

OPTIONAL MATERIALS:Aluminum Dome -ADCast Iron Dome -CIDGalvanized Cast Iron Dome -CIDGGalvanized Cast Iron Body & Collar -GRough Bronze Dome -RBDStainless Steel Mesh Secured to Dome - SSMDAcid Resistant Coated - ARC

VARIATIONS:L Speedi-Set Service Weight 02(50), 03(75), and 04(100)" sizes onlyLXH Speedi-Set Extra Heavy 02(50), 03(75), and 04(100)" sizes onlyT Threaded OutletExpansion Joint (Specify Fig.1710)Extension (Specify Height) -ESecondary Flashing Clamp -C2 (For Extensions)Adjustable Extension - AEExternal Waterdam Collar -WD Specify Height -WD2(50), -WD3(75) or -WD4(100)Vandal Proof Dome -U

1800

Formerly SQ-1-3182

1800

JJB

WB

WF

08/2

7/03

NO

NE

s180

0

5 1/4(135)

B

Polyethylene Dome

Combined FlashingClamp And Gravel

Stop

Deck Platewith Securing

BracketsA

11 DIA(280)

15 1/4 DIA(390)

FREE AREASQ IN(SQ CM)

102.5(661)

102.5(661)

02(50), 03(75), 04(100)

05(125), 06(150)

ASIZE

B DCAULK, NO-HUB,

& SPEEDI-SETStandpipe(Pipe Size)THREADED C

5(125)

5(125)

3 3/4(95)

3 3/4(95)

3 3/4(95)

3 3/4(95)

4(100)

6(150)


1800C...........CAULK OUTLET1800Y...........NO HUB OUTLET

NOTE: This Dimension to Internal Stop of Speedi-Set Gasket.

*

*

24 (610) 48 (1220) x 24 (610)

A

B

3 1/2(89)

5 1/4(135)

C* C*

15 1/4 DIA(390)

D

11 DIA(280)

JAY R.SMITH MFG. CO.®

DIVISION OF SMITH INDUSTRIES, INC.POST OFFICE BOX 3237MONTGOMERY, ALABAMA 36109-0237 (USA)TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.comCUSTOMER

DRIVEN

SMITH®

MEMBER OF:

®

ASPE®

SANITARY

EN G IN E E RINGPrevention Rather Than Cure

FUNCTION: Used on flat roofs of any construction (other than poured in place) where an emergency overflow drain can be used in combination with a standard roof drain. Large sump drain bodies with low profile domes provide sufficient free area for quick drainage of rainwater while protecting the drain sump and connected piping from the intrusion of debris. Internal standpipe type overflow drain receives water only when the build-up is greater than the setting of the standpipe. Water dam standpipe can be cut to achieve various water depths on the roof. Attached wide dual drain deck plate with securing holes enables both drains to be secured to the roof deck from the top surface of the roof reducing installation time, reducing the number of roof penetrations and eliminating the need for an underdeck clamp. The wide dual deck plate also recesses the drains slightly to prevent water build-up at the base of the drains.

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.10 A-1/2 - Roof Drain

sotis

Text Box

RD-1 & ORD-1

REV.

D 6-22-05 Rev. Variations/Optional Materials RN AM E 10/01/08 Rev. Figure Number JJ JM F 04/02/09 Rev. Drawing & Added Function JJ CR

DATE DESCRIPTION BY CKD. BY

WEIGHTPOUNDS

VOLUMECUBIC FEET

FIGURE NUMBER

LOCATION

FIG

UR

EN

UM

BE

R

DIM

EN

SIO

NS

AR

E S

UB

JEC

T T

O M

AN

UFA

CT

UR

ER

S T

OLE

RA

NC

E A

ND

CH

AN

GE

WIT

HO

UT

NO

TIC

EW

E C

AN

AS

SU

ME

NO

RE

SP

ON

SIB

ILIT

Y F

OR

US

E O

F S

UP

ER

SE

DE

D O

R V

OID

DAT

A

DR

AW

N B

Y:

CH

EC

KE

D B

Y:

AP

PR

OV

ED

BY

:D

ATE

:S

CA

LE:

SIZ

E AD

RA

WIN

G N

UM

BE

R

ROOF DRAIN AND OVERFLOW DRAIN

REGULARLY FURNISHED:Duco Cast Iron Bodies with Combined Flashing Clamp and Gravel Stop for Roof Drain and Combined Flashing Clamp and Gravel Stop with 3 1/2(89) HighInternal Water Dam Standpipe for Overflow Drain. Deck Plate with Securing Holes Provided to receive both Drains. Both Drains Provided with Polyethylene Domes.

OPTIONAL MATERIALS:Aluminum Dome -ADCast Iron Dome -CIDGalvanized Cast Iron Dome -CIDGGalvanized Cast Iron Body & Collar -GRough Bronze Dome -RBDStainless Steel Mesh Secured to Dome - SSMDAcid Resistant Coated - ARC

VARIATIONS:L Speedi-Set Service Weight 02(50), 03(75), and 04(100)" sizes onlyLXH Speedi-Set Extra Heavy 02(50), 03(75), and 04(100)" sizes onlyT Threaded OutletExpansion Joint (Specify Fig.1710)Extension (Specify Height) -ESecondary Flashing Clamp -C2 (For Extensions)Adjustable Extension - AEExternal Waterdam Collar -WD Specify Height -WD2(50), -WD3(75) or -WD4(100)Vandal Proof Dome -U

1800

Formerly SQ-1-3182

1800

JJB

WB

WF

08/2

7/03

NO

NE

s180

0

5 1/4(135)

B

Polyethylene Dome

Combined FlashingClamp And Gravel

Stop

Deck Platewith Securing

BracketsA

11 DIA(280)

15 1/4 DIA(390)

FREE AREASQ IN(SQ CM)

102.5(661)

102.5(661)

02(50), 03(75), 04(100)

05(125), 06(150)

ASIZE

B DCAULK, NO-HUB,

& SPEEDI-SETStandpipe(Pipe Size)THREADED C

5(125)

5(125)

3 3/4(95)

3 3/4(95)

3 3/4(95)

3 3/4(95)

4(100)

6(150)


1800C...........CAULK OUTLET1800Y...........NO HUB OUTLET

NOTE: This Dimension to Internal Stop of Speedi-Set Gasket.

*

*

24 (610) 48 (1220) x 24 (610)

A

B

3 1/2(89)

5 1/4(135)

C* C*

15 1/4 DIA(390)

D

11 DIA(280)

JAY R.SMITH MFG. CO.®

DIVISION OF SMITH INDUSTRIES, INC.POST OFFICE BOX 3237MONTGOMERY, ALABAMA 36109-0237 (USA)TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.comCUSTOMER

DRIVEN

SMITH®

MEMBER OF:

®

ASPE®

SANITARY

EN G IN E E RINGPrevention Rather Than Cure

FUNCTION: Used on flat roofs of any construction (other than poured in place) where an emergency overflow drain can be used in combination with a standard roof drain. Large sump drain bodies with low profile domes provide sufficient free area for quick drainage of rainwater while protecting the drain sump and connected piping from the intrusion of debris. Internal standpipe type overflow drain receives water only when the build-up is greater than the setting of the standpipe. Water dam standpipe can be cut to achieve various water depths on the roof. Attached wide dual drain deck plate with securing holes enables both drains to be secured to the roof deck from the top surface of the roof reducing installation time, reducing the number of roof penetrations and eliminating the need for an underdeck clamp. The wide dual deck plate also recesses the drains slightly to prevent water build-up at the base of the drains.

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.10 A-3/4 - Roof Drain

sotis

Text Box

RD-2 & ORD-2

sotis

Text Box

Changed per Addendum B

FIG

UR

EN

UM

BE

RD

RA

WN

BY

:

DIM

EN

SIO

NS

AR

E S

UB

JEC

T T

O M

AN

UFA

CT

UR

ER

S T

OLE

RA

NC

E A

ND

CH

AN

GE

WIT

HO

UT

NO

TIC

E

WE

CA

N A

SS

UM

E N

O R

ES

PO

NS

IBIL

ITY

FO

R U

SE

OF

SU

PE

RS

ED

ED

OR

VO

ID D

ATA

CH

EC

KE

D B

Y:

AP

PR

OV

ED

BY

:D

ATE

:S

CA

LE:

DR

AW

ING

NU

MB

ER

LOCATION

FIGURE NUMBERVOLUMECUBIC FEET

WEIGHTPOUNDS

CKD. BYDATEREV. DESCRIPTION

SIZ

E AN

ON

E

FLOOR OR SHOWER DRAINSWITH ADJUSTABLE STRAINER HEADS

FUNCTION: General service floor drain for use in showers, toilets, kitchens and other finished areas where foot traffic is expected. The round top strainer head is used for all types of poured finished floors. The square top is particularly adaptable to floors that are finished in material of square or straight line pattern. Reversible flashing collar permits adjustment of the strainer to meet finished floor level.

REGULARLY FURNISHED: Duco Cast Iron Body with Flashing Collar and Adjustable Strainer Head as Indicated by Suffix Letter Selected.

VARIATIONS:CI Funnel Strainer -F37Hinged Grate -HL Speedi-Set Service Weight 2(50), 3(75) & 4"(100) onlyLXH Speedi-Set Extra Heavy 2(50), 3(75) & 4"(100) onlySediment Bucket -BTrap Primer Connection -P050 1/2" (13) & -P075 3/4" (19)Vandal Proof Screws -UWide Flanged Strainer (Specify Fig. DX2005) Under Deck Clamp -UDC

OPTIONAL MATERIALS:Bronze Body -BBChrome Plated Strainer -CPGalvanized Cast Iron Body -GNickel Bronze Strainer -NBPolished Bronze Strainer -PBStainless Steel (Specify Fig. 9700-A)

2005

2005

PJ

TD

TD

5-17

-85

S20

05K

SEE PM0457 FOR OPTIONAL STRAINER HEADS.

J 04/10/03 Added 6" to Pipe Size JJ CLK 05/10/05 Revised ANSI Note JJ AM

NOTE: Dimensions shown in parentheses are in millimeters.

Meets ANSI Spec A112.6.3-2001 02(50), 03(75) or 04"(100) sizes only.

StrainerSize

BDIA or SQ

05 (125)06 (150)07 (180)08 (205)•09 (230)•10 (255)

*CollarIn HighPosition

X MIN MAX1 1/4(32)2 1/4(57)1 1/4(32)2 1/4(57)1 1/4(32)2 1/4(57)1 1/2(38)2 1/2(64)1 1/2(38)2 3/8(60)1 1/2(38)2 3/8(60)

*CollarIn Low

PositionXX

MIN MAX 3/4(19) 1 5/8(41) 3/4(19) 1 5/8(41) 7/8(22) 1 7/8(48) 1(25) 1 7/8(48) 1(25) 1 7/8(48) 1(25) 1 7/8(48)

Free AreaSQ IN

(SQ CM)

ROUND SQUARE 7(45) 6.5(42) 9(58) 12.5(81) 14(90) 11(71) 17(110) 14(90) 18(116) 16(103) 23(48) 16(103)

OutletSize

02(50)03(75)04(100)

Nickel BronzeStrainer Head

05(125) DIA or SQ06(150) DIA or SQ08(205) DIA or SQ

Fig. 2005L……(A) ROUND TOPFig. 2005L……(B) SQUARE TOP

Fig. 2005Y……(F) ROUND TOPFig. 2005Y.……(B) SQUARE TOP

A (Pipe Size) = 02(50), 03(75), 04(100), 05(125) or 06(150)

NO-HUB OUTLET

••

NO-HUB OUTLET

MAX

HighPosition

MAX

LowPosition

MAX

HighPositionLow

Position

MAX

Trap PrimerConnection(When Specified)

XX-MIN X-MIN

4(100) 1 1/4 (32)

Trap PrimerConnection(When Specified)

XX-MIN X-MIN

4(100)

SeepageOpenings

SeepageOpenings

**6 3/4 (170)

A

9 (230) DIA

B DIA or SQ

9 (230) DIA

B DIA or SQ

**6 3/4 (170)

A

1 1/4 (32)

sss

s

t 2 5/8"(67)

t This dimension to internal stop of speedi-set gasket.• Add 3/8"(10) to all min/max dimensions for round strainers.* Collar is reversible to obtain extreme high and low strainer positions.•• Not available for 5"(125) size strainer.** MIN 6 3/4"(170) hole required for core drilled application.


DRIVEN

SMITH®

MEMBER OF:

®

ASPE®

SANITARY

E


ure

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.10 A-5 Roof Drain

sotis

Text Box

RD-3

sotis

Text Box

Added per Addendum B


WEIGHTPOUNDS

VOLUMECUBIC FEET

FIGURE NUMBER

LOCATIONF

IGU

RE

NU

MB

ER

DIM

EN

SIO

NS

AR

E S

UB

JEC

T T

O M

AN

UFA

CT

UR

ER

S T

OLE

RA

NC

E A

ND

CH

AN

GE

WIT

HO

UT

NO

TIC

EW

E C

AN

AS

SU

ME

NO

RE

SP

ON

SIB

ILIT

Y F

OR

US

E O

F S

UP

ER

SE

DE

D O

R V

OID

DAT

A

DR

AW

N B

Y:

CH

EC

KE

D B

Y:

AP

PR

OV

ED

BY

:D

ATE

:S

CA

LE:

SIZ

E AD

RA

WIN

G N

UM

BE

R

08(200)9 1/4(235)5 7/8(149)

(3) MountingHoles At 120°

5/8(16)

C

2 (51)

A B

Wall Flange

F

E

D

NPT Thread

ROOF ACCESSORYDOWNSPOUT NOZZLE

FUNCTION: Used as a parapet overflow or at the base of a wall where a concealed leader discharges rainwater toground. Nozzle design diverts water away from building, eliminating wall stains. Wall flange covers rough opening andserves as anchor.

Fig. 1770T

REGULARLY FURNISHED:Cast Bronze Nozzle and Flange.

OPTIONAL MATERIALS:Nickel Bronze -NBPolished Bronze -PB

VARIATIONS:Bird Screen -BS

1770

1770

CR

JDJD

2-25

-85

NO

NE

S17

70F


02(50)2 3/4(70)2 3/4(70)

03(75)4

(100)3 1/2(89)

04(100)5

(125)3 7/8(98)

05(125)6

(150)4 3/8(111)

06(150)7 1/4(185)

5(125)C=RAD

D

E

F

A=PIPE

B=DIA

10(255) 12(305)11 1/8(283)7 1/4(185)

13 1/4(335)

8(205)

1 5/8(41)

1 3/8(35)

1 3/8(35)

1 3/8(35)

1 3/8(35)

1 3/8(35)

1 3/4(44)

2(51)

2 3/8(60)

2 1/16(52)

2 1/16(52)

2 1/16(52)

2 1/16(52)

2 1/16(52)

2 3/4(70)

2 15/16(75)

5 15/16(149)

5 5/8(143)

5 5/8(143)

5 5/8(143)

5 5/8(143)

5 5/8(143)

5 3/8(138)

7 9/16(192)

BSDEF

04/05/046-16-05

Added Bird Screen Variation JJ CL6-16-99 Revised Millimeters

Revised Table RN CL

CMD


DRIVEN

SMITH®

MEMBER OF:

®

ASPE®

SANITARY

E


ure

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.10 A-6 Emergency Overflow Nozzle

sotis

Text Box

EOD-1

sotis

Text Box

Added per Addendum B

sotis

Cloud

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.10-B-1 Floor Drain

sotis

Text Box

Tag: FD-1

sotis

Text Box


sotis

Text Box

Tag: FD-2

sotis

Text Box


sotis

Text Box

Tag: FD-3

sotis

Text Box


sotis

Text Box

Tag: FD-4


WEIGHTPOUNDS

VOLUMECUBIC FEET

FIGURE NUMBER

LOCATIONF

IGU

RE

NU

MB

ER

DIM

EN

SIO

NS

AR

E S

UB

JEC

T T

O M

AN

UFA

CT

UR

ER

S T

OLE

RA

NC

E A

ND

CH

AN

GE

WIT

HO

UT

NO

TIC

EW

E C

AN

AS

SU

ME

NO

RE

SP

ON

SIB

ILIT

Y F

OR

US

E O

F S

UP

ER

SE

DE

D O

R V

OID

DAT

A

DR

AW

N B

Y:

CH

EC

KE

D B

Y:

AP

PR

OV

ED

BY

:D

ATE

:S

CA

LE:

SIZ

E AD

RA

WIN

G N

UM

BE

R

A

B*2 1/2 (64)

1 5/8 (41)

8 (205) DIA8 1/2 (215) DIA12 (305) DIA 12 (305) DIA

8 1/2 (215) DIA

8 (205) DIA

5 1/2 (140)

Seepage Openings

Collar Can Be UsedAs Flashing Clamp(When Specified)

Trap PrimerConnection

(When Specified)

4 (100)

1 5/8 (41)

A

B6(150)

FLOOR DRAINSWITH 8 1/2" (215) ROUND TOPS

MEDIUM DUTY DRAINSFUNCTION: Used in moderate traffic areas where waste water contains no sediment or debris and floor constructionrequires shallow drain body. Body flange and flashing collar serve as anchor in on-grade locations and as flashing clampwhen installed in waterproof floors.

REGULARLY FURNISHED:Duco Cast Iron Body and Flashing Collarwith Cast Iron Bar Grate.

VARIATIONS:Closure Plug -XP (Fig. 2110 only)Deflector Grate -DGDome Grate -DFlat Bottom Strainer -FBS (Fig. 2110 only)L Speedi-Set Service Weight (Fig. 2110 only)LXH Speedi-Set Extra Heavy (Fig. 2110 only)NO-HUB Adaptor (Specify Fig. 2646Y) (Fig. 2115 only)Sediment Bucket -BSquare Top -STrap Primer Connection -P050 1/2" (13) & -P075 3/4" (19)Vandal Proof Grate -UWide Flange Deck Drain (Specify Fig. DX2565)T Threaded Outlet

OPTIONAL MATERIALS:Ductile Iron Grate -MGalvanized Cast Iron -GNickel Bronze Top -NBPolished Bronze Top -PBStainless Steel (Specify Fig. 9710)

ASIZE

B

02 (50) 03 (80) 04 (100)

4 1/4 (110) 3 3/4 (95) 3 1/4 (83)3 3/4 (95) for Caulk,NO-HUB, and Speedi-Set,2 (51) for Threaded

A SIZE

B

02 (50) 03 (80) 04 (100)

*This dimension to internal stop ofSpeedi-Set gasket.**Meets U.S. Gov't Spec. per WW-P-541-b,Type 220, 02 (50) and 03" (80) sizes only.See Fig. 2130 for 04" (100) size.

Add 3/16" (5) when bronze top is specified.

Fig. 2115C . . . CAULK OUTLETFig. 2115T . . . THREADED OUTLET**

Fig. 2110C . . . CAULK OUTLETFig. 2110Y . . . NO-HUB OUTLET

2110, 2115

2110

, 211

5P

JT

DT

D5-

17-8

5N

ON

ES

2110

F

BS

Free Area14.25 SQ IN(360) SQ CM

NOTE: Dimensions shown inparenthesis are in millimeters.

D 11-1-96 Revised EMB

*

*Not available on Fig. 2110Tthreaded outlet drain.

E 12-11-97 Revised Var & added note EMB DGF 05/10/05 Revised ANSI note JJ AM


DRIVEN

SMITH®

MEMBER OF:

®

ASPE®

SANITARY

E


ure

Meets ANSI Spec A112.6.3-2001 02(50), 03(75) or 04"(100) sizes only.

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.10-C-1 Garage Drain

sotis

Text Box

Tag: GD-1

sotis

Line

sotis

Line

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.10-C-2 Planter Drain

sotis

Text Box

Tag: PD-1

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.10-C-3 Area Drain

sotis

Text Box

Tag: AD-1

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.12 - A Grease Interceptor

sotis

Text Box

Tag: Grease Interceptor

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.12.B - Covers

sotis

Text Box

Grease Interceptor

sotis

Text Box

Rev 1 - Access Hatches will still be installed in ramp above

PLA

N V

IEW

A -

VIE

W A

VIE

W B

B -

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.13-A-1 Garage Drain Sump

sotis

Text Box

Tag: SUMP -1

sotis

Callout

+ 12" Extension Ring Model 57R-12

sotis

Callout

+ 12" Extension Ring Model 57R-12

sotis

Text Box

Section 221300-Facility Sanitary and Storm Water Systems 2.13-A-1 Garage Drain Sump

sotis

Text Box

Tag: SUMP -1

sotis

Cloud

partners.skanska.com resource station/resources...detailed, grouped by each number submittal...

Documents