Name - Jeevan Raj Title – Senior Electrical Designer

Permanent Address- Room No-106 Vighnharte App. Near Hindmata School, Thane Belapur Road Digha, New Mumbai, Maharashtra, India, Pincode- 400708, India .

Local Address- Al Wosail Tower, Al Tawen St. West Bay, P.O. Box 18130, Doha, State of Qatar.Mobile+974, 50205607, +91 9892299649.

E-mail Ids- Jeevan.raj1979@gmail.com & Jeevan.raj@ WorleyParsons.com

Software Learned

PDMS Design & Draft (v-11.3 to 12.00 SP6.9) COMOS software AutoCAD R-14 to 2012, Microstation V8. Familiar with ProArc Familiar With CCS (Change Cantrol System) Familiar with Optwin. CG Lux Familiar with Microsoft Excel & Microsoft word. Taken Training PDS, Microstation v8.5, Chalmite

Areas of Expertise 3D modeling PDMS Design & Draft (v-11.3 to 12.00 SP6.9) AutoCAD R-14 to 2014.

CAREER SUMMARY

Total of +11 Years of Experience in Design Department Related to Oil & gas projects, (Offshore and Onshore) Wellhead Platform, Process Platform, Power Projects, Building Services, Laboratories, Infrastructure Project, Chemical Plants, Hydrocarbons and Petrochemical Projects. Highly Skilled in PDMS software for Electrical Designing.

EXPERIENCE

Year – Present

May 2014 to till date

Title - WorleyParsons, Doha, Qatar

An Electrical Designer, Responsible for the following:

Preparation of Layout plan and sections, Single line Diagrams for 400kV,132kV, 33kV, 11kV, Lighting and Small Power Distribution Board, GIS Substation, Preparation of Electrical General Arrangement Drawings, Cable Tray & Support Details, Cable Trench Layout, Earthing and Lightning Protection Layouts, Cable Routing Layout, Lighting & Small Power Layouts, Bill of materials etc.

Current Working Project:

Project – QEZ3 Master Planning & Engineering Consultancy Services.

Name - Jeevan Raj Title – Senior Electrical Designer

The project consists of Preliminary Engineering Design,

Responsibility - 400KV/132KV HV Cable Routing Layouts, 11KV MV cable Routing Layouts, 415V LV Cable Routing & respective Single line Diagrams.

In WorleyParsons worked on Projects.

Project – Lusail development Primary infrastructure construction package of following substations.

The project consists of detailed design,

Responsibility - Layout plan & Sections, Substation Equipment layout, Substation earthing Layout, Substation Lighting, small power, cable tray, & lightning protection layout, Overall Street lighting, earthing & Overall cable routing layout, Installation details for Lighting, earthing, Cable Ladder & Lightning protection.

Project – Feed for Hamad International Airport Jet A-1 Supply.

The project consists of Feed Engineering,

1. Prepared Overall Street lighting Layout, Overall cable routing Layout & Overall earthing layout.

2. Substation Equipment Layout, cable tray layout, small power layout, lighting layout, Earthing layout & lightning protection layout.

Year – Year

June 2004 to

May 2014

Title – Aker Solutions, Mumbai, India.

As Senior Electrical Designer, Responsiblties:

PDMS Modeling Electrical Equipment like MCCs, PMCCs, MLDBs, Transformers, VFDs, small power and Lighting DBs, Socket outlets, Lighting Fixtures, Earth Bosses, Earthing Bus etc. Modeling Cable tray for Electrical, Instrumentation & Telecom. MTO and reports extract direct from PDMS model. Preparation of Layout plan and sections, Single line Diagrams for 33kV, 11kV, Lighting and Small Power Distribution Board, Preparation of Electrical General Arrangement Drawings, Cable Tray & Support Details, Cable Trench Layout, Earthing and Lightning Protection Layouts, Cable Routing Layout, Lighting & Small Power Layouts, Bill of materials etc.

In Aker Solutions worked on projects:Project – EDWARD GRIEG EPC Norwegian Project. (20 Slot well-head and Process Platform.)

Client – Lundin

Used Software – PDMS 12.0, COMOS, ProArc and CCS.

Scope of work - Detail Engineering.

Role – Area Lead Designer for Process Area.

Responsibility - On this project for modeling of Electrical equipment, Power Sockets, cable trays and MCTs (for Electrical, Instrument & Telecom cables), Preparation of Cable ladder/ tray ISO, overall area ISO, Equipment Room Layout, Power Layout, lighting Layouts, Interface between PDMS and COMOS, collect information from COMOS, Co-ordination To interact with other disciplines mainly Civil, Piping , Instrument, Telecom and Safety to take care of Electrical Requirements and Interface for different Areas,

Name - Jeevan Raj Title – Senior Electrical Designer

Read GA drawings interface with respective PRE, Used ProArc software for governing documentation.

Project – Ekofisk 2/4z EPC Norwegian Project,

36 Slot well-head Platform in Greater Ekofisk area.

(Deputed to Aker Engineering & Technology Oslo, Norway for This Projects from 1st April 2011 to 30

September 2012)

Client – ConocoPhillips

Used Software – PDMS 12.0, COMOS, ProArc, Microstation and CCS.

Scope of work - Detail Engineering.

Role – Area Lead Designer for Wellhead Area.

Responsibility - On this project for modeling of Electrical equipment, Power Sockets, cable trays and MCTs (for Electrical, Instrument & Telecom cables), Preparation of Cable ladder/ tray ISO, overall area ISO, Equipment Room Layout, Power Layout, lighting Layouts, Interface between PDMS and COMOS, collect information from COMOS, Co-ordination To interact with other disciplines mainly Civil, Piping , Instrument, Telecom and Safety to take care of Electrical Requirements and Interface for different Areas, Read GA drawings interface with respective PRE, Used ProArc software for governing documentation.

Project – D1 Development Platform Project (ONGC), Three well-head platforms D1-B, D1-C, D1-D and including D1-B & D1 bridge module

Client – ONGC

Used Software – PDMS 11.6., MDS, AutoCad.

Scope of work - Detail Engineering.

Role – Senior PDMS Designer.

Responsibility - On this project for modeling of Electrical equipment, Power Sockets, cable trays (for Electrical & Instrument cables), preparing Power Layouts, Cable tray Layouts, Earthing Layouts & Lighting Layouts with respective SLD, Bill of Materials & preparing Electrical standard installation details

Project – Supreme Petrochem Ltd. – Expandable Polystyrene (EPS) Project.

Client - Supreme Petrochem Ltd.

Used Software - AutoCad

Scope of work - Detail Engineering.

Role – Electrical and Instrumentation Designer.

Responsibility - On this project for preparing Power Layouts, Cable tray Layouts (for Electrical & Instrument cables), Earthing Layouts & Lighting Layouts with respective SLD, Bill of Materials & preparing Electrical standard installation details.

Project – HUL - CLS Plant

Client - Hindustan Unilever Ltd.

Name - Jeevan Raj Title – Senior Electrical Designer

Used Software – PDMS 11.6., AutoCad.

Scope of work - Detail Engineering.

Role – PDMS (E & I) Designer.

Responsibility - On this project for Modeling of Electrical equipment, Power Sockets, cable trays (for Electrical & Instrument cables), preparing Power Layouts, Cable tray Layouts, Earthing Layouts & Lighting Layouts with respective SLD, Bill of Materials & preparing Electrical standard installation details.

Project – CPP – Chlorine Dioxide Plant.

Client - Century Pulp and Paper.

Used Software – PDMS 11.3, AutoCad.

Scope of work - Detail Engineering.

Role – PDMS Designer.

Responsibility - Involved on this project for modeling of Electrical Equipment & cable trays.

Project – MA Condensate Project.

Client - Reliance Industries Ltd.

Used Software – PDMS 11.6, AutoCad,

Scope of work - Detail Engineering.

Role – PDMS Designer.

Responsibility - On this project for modeling of Electrical equipment, Power Sockets, cable trays, preparing Equipment layout, Power Layouts, Cable tray Layouts, Cable cellar layout, Earthing Layouts & Lighting Layouts with respective SLD, Bill of Materials & preparing Electrical standard installation details.

Project – KG-D6 Block Field Development Project.

Client - Reliance Industries Ltd.

Used Software – PDMS 11.6, AutoCad,

Scope of work - Detail Engineering.

Role – PDMS Designer.

Responsibility - On this project for modeling of Electrical equipment, Power Sockets, cable trays, preparing Equipment layout, Power Layouts, Cable tray Layouts, Cable cellar layout, Earthing Layouts & Lighting Layouts with respective SLD, Bill of Materials & preparing Electrical standard installation details.

Project – Themis - OSD Plant

Client - Themis Laboratories Private Ltd.

Used Software – AutoCad,

Name - Jeevan Raj Title – Senior Electrical Designer

Scope of work - Detail Engineering.

Role – Electrical Designer.

Responsibility - On this project for preparing Equipment layout, Power Layouts, Cable tray Layouts, Earthing Layouts & Lighting Layouts with respective SLD, Bill of Materials & preparing Electrical standard installation details.

Project – PTA-3 Project At Hazira

Client - Reliance Industries Ltd.

Used Software – Microstation, AutoCad, PDS, Naviswork,

Scope of work - Detail Engineering.

Role – Senior Draughtsman.

Responsibility - On this project for preparing Power Layouts, Cable tray Layouts & Lighting Layouts with respective SLD and sectional details.

Project – CP-11 PSF Project at Hazira

Client - Reliance Industries Ltd.

Used Software – AutoCad, Microstation.

Scope of work - Detail Engineering.

Role – Electrical Draughtsman.

Responsibility - On this project for preparing Power Layouts, Cable tray Layouts & Lighting Layouts with respective SLD and sectional details.

Education:

Diploma in Mech. Draughtsman from Gupte Academy Dadar, Mumbai, India. Pass out 2004.

AutoCAD from Gupte Academy Dadar, Mumbai, India. Pass out 2004.

Personal Details:

Date of Birth : 1st Jan 1979

Nationality : Indian

Passport No : H5587200Date of Issue : 20th Oct. 2009Date of Expiry : 19th Oct. 2019