retained building kings yard site

8/2/2019 Retained Building Kings Yard Site

1/12

ELECTRI CAL I NSTALLATI ON CERTI FI CATEI ssued in accordance with British Standard BS 76 71

Requireme nts for Electrical I nstallations

Certificate Reference:

1. DETAI LS OF THE CLI ENT

2. DETAI LS OF THE I NSTALLATI ON

3. DESI GN

4. CONSTRUCTI ON

5. I NSPECTI ON AND TESTI NG

6. DESI GN, CONSTRUCTI ON, I NSPECTI ON AND TESTI NG

Client Address:

InstallationAddress:

Extent of the

installation coveredby this certificate:

The installation is:

New

An addition

An alteration

I/We, being the person(s) responsible for the design of the electrical installation (as indicated by my/our signature(s) below)particulars of which are described above, having exercised reasonable skill and care when carrying out the design, hereby CERTIFYthat the design work for which I/we have been responsible is, to the best of my/our knowledge and belief,

in accordance with BS 7671: amended to except for the departures, detailed as follows:

Details of departures from BS 7671, as amended (Regulations 120.3, 133.5):

The extent of liability of the signatory/signatories is limited to the work described above as the subject of this certificate.

For the DESI GN of the instal lation:

Name: Position: Signature: Date:

Where there is divided responsibility for the design:


I/We, being the person(s) responsible for the construction of the electrical installation (as indicated by my/our signature(s) below)particulars of which are described above, having exercised reasonable skill and care when carrying out the construction, herebyCERTIFY that the construction work for which I/we have been responsible is, to the best of

my/our knowledge and belief, in accordance with BS 7671: amended to except for the

departures, if any, detailed as follows:



For the CONSTRUCTI ON of the installation:


I/We, being the person(s) responsible for the inspection and testing of the electrical installation (as indicated by my/oursignature(s) below) particulars of which are described above, having exercised reasonable skill and care when carrying out theinspection and testing, hereby CERTIFY that the work for which I/we have been responsible is to the best of my/our

knowledge and belief, in accordance with BS 7671: amended to except for the

departures, if any, detailed as follows:



For the I NSPECTI ON AND TESTI NG of the installation:


Report reviewed an d confirmed by:


I/We, being the person(s) responsible for the design, construction, inspection and testing of the electrical installation (as indicatedby my/our signature(s) below) particulars of which are described above, having exercised reasonable skill and care when carryingout the design, construction, inspection and testing, hereby CERTIFY that the said work for which I/We

have been responsible is to the best of my/our knowledge and belief, in accordance with BS 7671: amended to

except for the departures, if any, detailed as follows:



For the DESI GN, the CONSTRUCTI ON, and the I NSPECTI ON AND TESTI NG of the instal lation:

Name: Position: Signature: Date:Report reviewed an d confirmed by:


0039293

Page: 1 of 11

P J Carey (contactors) Ltd, Carey House, Great Central Way, Wembley Middlesex, HAR OHR

Retained Building, Kings Yard energy centre, Olympic Park Site, London

Landlords Power and lighting

N/A

N/A

2008 2011

None

2008 2011

None

Kevin Radway Electrician 23/11/2011

2008 2011

None

N/A N/A N/A N/A

N/A N/A N/A N/A

2008

2011

None

N/A N/A N/A N/A

N/A N/A N/A N/A

This form is based on the model shown in Appendix 6 of BS 7671:2008 amended 2011.


2/12

7 . DETAI LS OF THE ELECTRI CAL CONTRACTOR

8. SUPPLY CHARACTERI STI CS AND EARTHI NG ARRANGEMENTS

9. PARTI CULARS OF I NSTALLATI ON AT THE ORI GI N

10 . COMMENTS ON EXI STI NG I NSTALLATI ON

11 . NEXT I NSPECTI ON

DESIGN (1) Trading Title:

Address:Registration Number:

Telephone Number:

DESIGN (2) Trading Title:


Telephone Number:

CONSTRUCTION Trading Title:


Telephone Number:

INSPECTIONAND TESTING Trading Title:


Telephone Number:

System Type(s)

TN-S

TN-C-S

TNC

TT

IT

Num ber and Type of Live Conductors

ac:1-phase

(2 wire):2-phase(3 wire):3-phase(3 wire):

Other:

1-phase

(3 wire):

3-phase(4 wire):

dc:

2 pole:

3 pole:

Other:

Nature of Supply Parameters

Nominalvoltage(s):

U: Uo:

Nominal frequency, f:

Prospective faultcurrent, lpf:

External earth faultloop impedance, Ze:

Number of supplies:

Characteristics of Primary

Supply Overcurrent

Protective Device(s)

BS(EN):

Type:

Rated current:

Short-circuitcapacity:

Means of Earthing

Distributor'sfacility:

Installationearth electrode:

Details of I nstal lat ion Earth Electrode ( wh ere applicable)

Type:

Electroderesistance, RA:

Location:

Method ofmeasurement:

Maximum Demand (Load): Protective measure(s) against electric shock:

Main Sw itch or Circuit-Breaker

TypeBS(EN):

Number ofpoles:

Supplyconductorsmaterial:Supplyconductorscsa:

Voltage rating:

Ratedcurrent, ln:

RCD operatingcurrent:

RCD operatingtime:

Earthing and Protective Bonding Conductors

Earthing conductor

Conductormaterial:

Conductorcsa:

Continuitycheck:

Main protective bonding conductors

Conductormaterial:

Conductorcsa:

Continuitycheck:

Bonding of extraneous-conductive parts

Water service:

Gas service:

Oil service:

Structural Steel:

Lightningprotection:

Other services:

Note: Enter 'NONE' or, where appropriate, the page number(s) of additional page(s) of comments on theexisting installation.

I/We, the designer(s), RECOMMEND that this installation is further inspected and tested after aninterval of not more than:

Postcode:

Postcode:

Postcode:

Postcode:

Ref: 0039293 Page: 2 of 11

HPEMS Ltd

Paddon HouseStortford RoadDunmow. Essex

CM6 1DA

33898 /

01371 877250

Same as Above

HPEMS Ltd

Paddon HouseStortford RoadDunmow. Essex

CM6 1DA

33898 /

01371 877250

Same as Above

N/A

N/A

N/A

N/A

N/A N/A N/A

N/A N/A

N/A

N/AN/A

N/A

400 V 230 V

50 Hz5.5 kA

0.05

1

N/A

A

kA

N/A

N/A

N/A

N/A

N/A

ADS

60947-2 MCCB

3

Copper

25 2mm

1000 V

250 A

N/A mA

N/A ms

Copper 25 2mm

Copper 16 2mm

N/A

N/A

N/A

N/A

N/A

None

5 Years



3/12

12 . SCHEDULE OF I TEMS I NSPECTED

13 . SCHEDULE OF I TEMS TESTED

14 . SCHEDULE OF ADDI TI ONAL RECORDS ( See attached schedule)

Met hods of protection against e lectric shock

Basic and fau lt protection:

(i) SELV (ii) PELV

Double or reinforced insulation:

(iii) Double or Reinforced Insulation

Basic protection:

(i) Insulation oflive parts

(ii) Barriers orenclosures

(iii) Obstacles ** (iv) Placing outof reach **

Fault protection:

( i ) Automat ic disconnection of supply

Presence of earthing conductor

Presence of circuit protective conductors

Presence of main protective bonding conductors

Presence of earthing arrangements for combinedprotective and functional purposes

Presence of adequate arrangements for alternativesource(s), where applicable

FELV

Choice and setting of protective and monitoring devices(for fault protection and/or overcurrent protection)

( i i) Non-conducting location * *

Absence of protective conductors

( i ii ) Earth-free local equipotential bonding * *

Presence of earth-free local equipotential bonding

( iv) Electrical Separat ion

Provided for one i tem of current-using equipment

Provided for more than one i tem of current-usingequipment **

Additional protection:

Presence of residual current device(s)

Presence of supplementary bonding conductors

* * For use in control led supervised/ conditions only

Prevention of mutua l detrimental influence

(a) Proximity of non-electrical services and otherinfluences

(b) Segregation of Band I and Band II circuits or use ofBand II insulation

(c) Segregation of safety circuits

I denti f icationPresence of diagrams, instructions, circuit charts andsimilar information

Presence of danger notices and other warning notices

Labelling of protective devices, switches and terminals

Identification of conductors

Cables and ConductorsSelection of conductors for current carrying capacity andvoltage drop

Erection methods

Routing of cables in prescribed zones or withinmechanical protection

Cables incorporating earthed armour or sheath, or runwithin an earthed wiring system, or otherwise adequatelyprotected against nails, screws and the like

Additional protection provided by 30mA RCD for cables inconcealed walls (where required in premises not underthe supervision of skilled or instructed persons)

Connection of conductors

Presence of fire barriers, suitable seals and protectionagainst thermal effects

General

Presence and correct location of appropriate devices forisolation and switching

Adequacy of access to switchgear and other equipment

Particular protective measures for special installations

and locationsConnection of single-pole devices for protection orswitching in line conductors only

Correct connection of accessories and equipment

Presence of undervoltage protective devices

Selection of equipment and protective measuresappropriate to external influences

Selection of appropriate functional switching devices

External earth fault loop impedance, Ze

Installation earth electrode resistance, RA

Continuity of protective conductors

Continuity of ring final circuit conductors

Insulation resistance between live conductors

Insulation resistance between live conductors and earth

Protection by separation of circuits

Protection against direct contact by barrier or enclosureprovided during erection

Insulation of non-conducting floors or walls

Polarity

Earth fault loop impedance, Zs

Verification of phase sequence

Operation of residual current device(s)

Functional testing of assemblies

Verification of voltage drop

Note: Additional page(s) must be identified by the Electrical

Installation Cert serial and page number(s).All boxes must be completed. 'tick' indicates that an inspection or test was carried out and that the result was satisfactory. 'X ' indicates than aninspection or test was carried out and the result is not satisfactory. ' N/ A' indicates that an inspection or test was not applicable to the particularinstallation. 'LI M' indicates that, exceptionally, a limitation agreed with the person ordering the work prevented the inspection or test being carried out.

This form is based on the model shown in Appendix 6 of BS 7671:2008 amended 2011. Ref: 0039293 Page: 3 of 11

N/A N/A

N/A N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

LIM

N/A

N/A

N/A

N/A

N/A

8, 9, 10, 11


4/12

15 . CI RCUI T DETAI LS

16 . CODES FOR TYPE OF W I RI NG

TO BE COMPLETED I N EVERY CASE

Location of distribution board:

Distribution board designation:

TO BE COMPLETED ONLY I F THE DI STRI BUTI ON BOARD I S NOT CONNECTEDDI RECTLY TO THE ORIGI N OF THE I NSTALLATI ON

Supply to distributionboard is from:

Overcurrent protective device for thedistribution circuit:

TypeBS(EN): Rating:

No ofphases:

NominalVoltage:

Associated RCD(if any) BS(EN):

RCD Noof poles: RCD ln:

A: PVC/PVC cables

B: PVC cables in metallic conduit

C: PVC cables in non-metallic conduit

D: PVC cables in metallic trunking

E: PVC cables in non-metallic trunking

F: PVC/SWA cables

G: XLPE/SWA cables

H: Mineral-insulated cables

O - Other:

Ref: 0039293 Page: 4 of 11

Electrical Riser Cupboard groundfloor

DBL-G

PB-RBS/2

60947-2 MCCB 100 A

3 400 V

N/A

N/A N/A mA

Circuitnumber

andphase

Circuit designation

Typeofwiring

ReferenceMethod

Numberof

pointsserved

Live

mm2

Circuitconductors:

csa

cpc

mm2Maxdisconnecttime

permittedbyBS7671

s

BS(EN)

TypeNo

Rating

A

Overcurrent protectivedevices

Short-circuit

Capacity

kA

RCD

Operating

current

mAMaximumZ

s

permittedbyBS7671

1 L1 Grd mens WC HDs and cleaner socket O C 3 4 2.5 0.4 60898 C 20 10 N/A 1.15

1 L2 --- --- --- --- --- --- --- --- --- --- --- ---

1 L3 --- --- --- --- --- --- --- --- --- --- --- ---

2 L1 Ground Floor tea station O C 4 4 1.5 0.4 60898 C 20 10 N/A 1.15

2 L2 --- --- --- --- --- --- --- --- --- --- --- ---

2 L3 --- --- --- --- --- --- --- --- --- --- --- ---

3 L1 Ground Floor water heater O C 1 4 2.5 0.4 60898 C 20 10 N/A 1.15

3 L2 --- --- --- --- --- --- --- --- --- --- --- ---

3 L3 --- --- --- --- --- --- --- --- --- --- --- ---

4 L1 Ground floor trace heating O C 1 4 2.5 0.4 60898 C 20 10 N/A 1.15

4 L2 --- --- --- --- --- --- --- --- --- --- --- ---4 L3 --- --- --- --- --- --- --- --- --- --- --- ---

5 L1 --- --- --- --- --- --- --- --- --- --- --- ---

5 L2 --- --- --- --- --- --- --- --- --- --- --- ---

5 L3 --- --- --- --- --- --- --- --- --- --- --- ---

6 L1 Grd WC shower disabled alarm O C 1 4 2.5 0.4 60898 C 20 10 N/A 1.15

6 L2 --- --- --- --- --- --- --- --- --- --- --- ---

6 L3 --- --- --- --- --- --- --- --- --- --- --- ---

7 L1 Ground Ladies WC, HDs O C 2 4 2.5 0.4 60898 C 20 10 N/A 1.15

7 L2 --- --- --- --- --- --- --- --- --- --- --- ---

7 L3 --- --- --- --- --- --- --- --- --- --- --- ---

8 L1 Ground floor lift supply O C 1 4 2.5 0.4 60898 C 20 10 N/A 1.15

8 L2 --- --- --- --- --- --- --- --- --- --- --- ---

8 L3 --- --- --- --- --- --- --- --- --- --- --- ---

LSF/LSF



5/12

17 . CHARACTERI ST I CS AT THI S D.B. 18 . DETAI LS OF TEST I NSTRUMENTS

1 9 . TEST RESULTS

20 . TESTED BY

TO BE COMPLETED ONLY IF THE DI STRI BUTION BOARD I S NOT

CONNECTED DI RECTLY TO THE ORI GIN OF THE I NSTALLATI ON

Confirmation of supply polarity

Zs:

lpf:

Operating timesof associated RCD

(if any)

At ln:

At 5ln:

Test Instruments (serial numbers) used:

Earth fault loopimpedance:

InsulationResistance:

Continuity:

RCD:

Other:

Other:

Name:

Signature:

Position:

Date oftesting:

Ref: 0039293 Page: 5 of 11

0.03

6.5 kA

- ms

- ms

8934065

8934065

8934065

N/A

N/A

N/A

Circuitnumber

andphase

r1(Line)

rnNeutral)

Ring final circuits only(measured end to end)

r2(cpc)

R1+R2

Circuit impedances (Ohms)

All circuits(one column tobe completed)

R2

Line/Line

M

Line/Neutral

M

Line/Earth

M

Insulation resistance(record lower or lowest value)

Neutral/Earth

M

Polarity

Maximummeasuredearth fault

loopimpedance

Zs

At ln

ms

At 5 ln

ms

RCD Operatingtimes

Testbutton

operation

1 L1 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

1 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

1 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

2 L1 0.08 0.08 0.01 0.18 N/A N/A > 200 > 200 > 200 0.19 N/A N/A ---

2 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

2 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

3 L1 --- --- --- 0.01 N/A --- > 200 > 200 > 200 0.2 N/A N/A ---

3 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

3 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

4 L1 --- --- --- 0.15 N/A --- > 200 > 200 > 200 0.21 N/A N/A ---

4 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---4 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

5 L1 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

5 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

5 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

6 L1 --- --- --- 0.09 N/A --- > 200 > 200 > 200 0.18 N/A N/A ---

6 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

6 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

7 L1 --- --- --- 0.06 N/A --- > 200 > 200 > 200 0.18 N/A N/A ---

7 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

7 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

8 L1 --- --- --- 0.05 N/A --- > 200 > 200 > 200 0.17 N/A N/A ---

8 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

8 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

Kevin Radway Electrician23/11/2011



6/12

15 . CI RCUI T DETAI LS

16 . CODES FOR TYPE OF W I RI NG







TypeBS(EN): Rating:

No ofphases:

NominalVoltage:



A: PVC/PVC cables





F: PVC/SWA cables

G: XLPE/SWA cables


O - Other:

Ref: 0039293 Page: 6 of 11

Electrical Riser Cupboard groundfloor

DBL-G

PB-RBS/2

60947-2 MCCB 100 A

3 400 V

N/A

N/A N/A mA

Circuitnumber

andphase

Circuit designation

Typeofwiring

ReferenceMethod

Numberof

pointsserved

Live

mm2

Circuitconductors:

csa

cpc


permittedbyBS7671

s

BS(EN)

TypeNo

Rating

A


Short-circuit

Capacity

kA

RCD

Operating

current

mAMaximumZ

s

permittedbyBS7671

9 L1 Grd mens Acces WC HDs & cleaner skt O C 2 4 2.5 0.4 60898 C 20 10 N/A 1.15

9 L2 --- --- --- --- --- --- --- --- --- --- --- ---

9 L3 --- --- --- --- --- --- --- --- --- --- --- ---

10 L1 Grd Flr hall, access wc, riser & tea stn ltg O C 8 2.5 1.5 0.4 60898 C 10 10 N/A 2.30

10 L2 --- --- --- --- --- --- --- --- --- --- --- ---

10 L3 --- --- --- --- --- --- --- --- --- --- --- ---

11 L1 Grd flr mens WC & baby change lights O C 6 2.5 1.5 0.4 60898 C 10 10 --- 2.30

11 L2 --- --- --- --- --- --- --- --- --- --- --- ---

11 L3 --- --- --- --- --- --- --- --- --- --- --- ---

12 L1Grd Flr ladies WC , cleaners cupb and servicesvoid ltg

O C 9 2.5 1.5 0.4 60898 C 10 10 N/A 2.30

12 L2 --- --- --- --- --- --- --- --- --- --- --- ---12 L3 --- --- --- --- --- --- --- --- --- --- --- ---

LSF/LSF



7/12

17 . CHARACTERI ST I CS AT THI S D.B. 18 . DETAI LS OF TEST I NSTRUMENTS

1 9 . TEST RESULTS

20 . TESTED BY




Zs:

lpf:


(if any)

At ln:

At 5ln:




Continuity:

RCD:

Other:

Other:

Name:

Signature:

Position:

Date oftesting:

Ref: 0039293 Page: 7 of 11

0.03

6.5 kA

- ms

- ms

8934065

8934065

8934065

N/A

N/A

N/A

Circuitnumber

andphase

r1(Line)

rnNeutral)


r2(cpc)

R1+R2


All circuits(one column tobe completed)

R2

Line/Line

M

Line/Neutral

M

Line/Earth

M


Neutral/Earth

M

Polarity


loopimpedance

Zs

At ln

ms

At 5 ln

ms

RCD Operatingtimes

Testbutton

operation

9 L1 --- --- --- 0.11 N/A --- > 200 > 200 > 200 0.19 N/A N/A ---

9 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

9 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

10 L1 --- --- --- 0.36 N/A --- > 200 > 200 > 200 0.61 N/A N/A ---

10 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

10 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

11 L1 --- --- --- 0.30 N/A --- > 200 > 200 > 200 0.46 N/A N/A ---

11 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

11 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---

12 L1 --- --- --- 0.32 --- --- > 200 > 200 > 200 0.04 N/A N/A ---

12 L2 --- --- --- --- --- --- --- --- --- --- --- --- --- ---12 L3 --- --- --- --- --- --- --- --- --- --- --- --- --- ---




8/12

CI RCUI T DETAI LS

CODES FOR TYPE OF WI RI NG







TypeBS(EN): Rating:

No ofphases:

NominalVoltage:



A: PVC/PVC cables





F: PVC/SWA cables

G: XLPE/SWA cables


O - Other:

Ref: 0039293 Page: 8 of 11

Electrical Riser Cupboard first floor

DBL-1

PB-RBS/2

A

3 400 V

mA

Circuitnumber

andphase

Circuit designation

Typeofwiring

ReferenceMethod

Numberof

pointsserved

Live

mm2

Circuitconductors:

csa

cpc


permittedbyBS7671

s

BS(EN)

TypeNo

Rating

A


Short-circuit

Capacity

kA

RCD

Operating

current

mAMaximumZ

s

permittedbyBS7671

1 L1 --- --- --- --- --- --- --- --- --- --- --- ---

1 L21st Flr SS wc and access wc HDs + cleanerssockets

O C 3 4 2.5 0.4 60898 C 20 10 N/A 1.15

1 L32nd Flr SS wc and access wc HDs + cleanerssockets

O C 3 4 2.5 0.4 60898 C 20 10 N/A 1.15

2 L1 --- --- --- --- --- --- --- --- --- --- --- ---

2 L2 1st floor kitchen O C 4 4 2.5 0.4 60898 C 20 10 N/A 1.15

2 L3 2ndt floor kitchen O C 4 4 2.5 0.4 60898 C 20 10 N/A 1.15

3 L1 --- --- --- --- --- --- --- --- --- --- --- ---

3 L2 1st floor water heater O C 1 4 2.5 0.4 60898 C 20 10 N/A 1.15

3 L3 2nd floor water heater O C 4 4 2.5 0.4 60898 C 2 10 N/A N/A

4 L1 --- --- --- --- --- --- --- --- --- --- --- ---

4 L2 1st floor trace heating O C 1 4 2.5 0.4 60898 C 20 10 N/A 1.154 L3 2nd floor trace heating O C 1 4 2.5 0.4 60898 C 20 10 N/A 1.15

5 L1 --- --- --- --- --- --- --- --- --- --- --- ---

5 L2 --- --- --- --- --- --- --- --- --- --- --- ---

5 L3 --- --- --- --- --- --- --- --- --- --- --- ---

6 L1 --- --- --- --- --- --- --- --- --- --- --- ---

6 L2 1st floor ss wc HD O C 2 4 2.5 0.4 60898 C 20 10 N/A 1.15

6 L3 2nd floor Acess WC disabled alarm O C 1 4 2.5 0.4 60898 C 20 10 N/A 1.15

7 L1 --- --- --- --- --- --- --- --- --- --- --- ---

7 L2 1st floor Acess WC disabled alarm O C 1 4 2.5 0.4 60898 C 20 10 N/A 1.15

7 L3 --- --- --- --- --- --- --- --- --- --- --- ---

8 L1 --- --- --- --- --- --- --- --- --- --- --- ---

8 L2 --- --- --- --- --- --- --- --- --- --- --- ---

8 L3 2nd floor ss wc HD O C 2 4 2.5 0.4 60898 C 20 10 N/A 1.15

LSF/LSF



9/12

CH ARACTERI STI CS AT TH I S D .B. D ETAI LS OF TEST I N STRUM EN TS

TEST RESULTS

TESTED BY




Zs:

lpf:


(if any)

At ln:

At 5ln:




Continuity:

RCD:

Other:

Other:

Name:

Signature:

Position:

Date oftesting:

Ref: 0039293 Page: 9 of 11

0.03

6.5 kA

- ms

- ms

8934065

8934065

8934065

N/A

N/A

N/A

Circuitnumber

andphase

r1(Line)

rn(Neutral)


r2(cpc)

R1+R2


All circuits(one column to be

completed)

R2

Line/Line

M

Line/Neutral

M

Line/Earth

M


Neutral/Earth

M

Polarity


loopimpedance

Zs

At ln

ms

RCD Operatingtimes

At 5 ln

ms

1 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

1 L2 --- --- --- 0.16 N/A --- > 200 > 200 > 200 0.36 N/A N/A

1 L3 --- --- --- 0.02 N/A --- > 200 > 200 > 200 0.26 N/A N/A

2 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

2 L2 --- --- --- 0.08 N/A --- > 200 > 200 > 200 0.14 N/A N/A

2 L3 --- --- --- 0.11 N/A --- > 200 > 200 > 200 0.12 N/A N/A

3 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

3 L2 --- --- --- 0.05 N/A --- > 200 > 200 > 200 0.19 N/A N/A

3 L3 --- --- --- 0.12 N/A --- > 200 > 200 > 200 0.13 N/A N/A

4 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

4 L2 --- --- --- 0.04 N/A --- > 200 > 200 > 200 0.15 N/A N/A 4 L3 --- --- --- 0.09 N/A --- > 200 > 200 > 200 0.12 N/A N/A

5 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

5 L2 --- --- --- --- --- --- --- --- --- --- --- --- ---

5 L3 --- --- --- --- --- --- --- --- --- --- --- --- ---

6 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

6 L2 --- --- --- 0.06 N/A --- > 200 > 200 > 200 0.1 N/A N/A

6 L3 --- --- --- 0.07 N/A --- > 200 > 200 > 200 0.1 N/A N/A

7 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

7 L2 --- --- --- 0.05 N/A --- > 200 > 200 > 200 0.08 N/A N/A

7 L3 --- --- --- --- --- --- --- --- --- --- --- --- ---

8 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

8 L2 --- --- --- --- --- --- --- --- --- --- --- --- ---

8 L3 --- --- --- 0.16 N/A --- > 200 > 200 > 200 0.2 N/A N/A


This form is based on the model shown in Appendix 6 of BS 7671:2008 amended 2011


10/12

CI RCUI T DETAI LS

CODES FOR TYPE OF WI RI NG







TypeBS(EN): Rating:

No ofphases:

NominalVoltage:



A: PVC/PVC cables





F: PVC/SWA cables

G: XLPE/SWA cables


O - Other:

Ref: 0039293 Page: 10 of 11

Electrical Riser Cupboard first floor

DBL-1

PB-RBS/2

A

3 400 V

mA

Circuitnumber

andphase

Circuit designation

Typeofwiring

ReferenceMethod

Numberof

pointsserved

Live

mm2

Circuitconductors:

csa

cpc


permittedbyBS7671

s

BS(EN)

TypeNo

Rating

A


Short-circuit

Capacity

kA

RCD

Operating

current

mAMaximumZ

s

permittedbyBS7671

9 L1 --- --- --- --- --- --- --- --- --- --- --- ---

9 L2 --- --- --- --- --- --- --- --- --- --- --- ---

9 L3 --- --- --- --- --- --- --- --- --- --- --- ---

10 L1 --- --- --- --- --- --- --- --- --- --- --- ---

10 L2 Grd - 2nd stairs and landing s lighting O C 14 1.5 1.0 0.4 60898 C 10 10 N/A 2.30

10 L3 --- --- --- --- --- --- --- --- --- --- --- ---

11 L1 --- --- --- --- --- --- --- --- --- --- --- ---

11 L2 1st fllor hall and wc lights O C --- 2.5 1.5 0.4 60898 C 10 10 N/A 2.30

11 L3 2nd fllor hall and wc lights O C --- 2.5 1.5 0.4 60898 C 10 10 N/A 2.30

12 L1 --- --- --- --- --- --- --- --- --- --- --- ---

12 L21st floor service void, kitchen + cupboard lights

O C 7 2.5 1.5 0.4 60898 C 10 10 N/A 2.3012 L3 2ndt floor service void, kitchen + cupboard lights O C 7 2.5 1.5 0.4 60898 C 10 10 N/A 2.30

LSF/LSF



11/12

CH ARACTERI STI CS AT TH I S D .B. D ETAI LS OF TEST I N STRUM EN TS

TEST RESULTS

TESTED BY




Zs:

lpf:


(if any)

At ln:

At 5ln:




Continuity:

RCD:

Other:

Other:

Name:

Signature:

Position:

Date oftesting:

Ref: 0039293 Page: 11 of 11

0.03

6.5 kA

- ms

- ms

8934065

8934065

8934065

N/A

N/A

N/A

Circuitnumber

andphase

r1(Line)

rn(Neutral)


r2(cpc)

R1+R2


All circuits(one column to be

completed)

R2

Line/Line

M

Line/Neutral

M

Line/Earth

M


Neutral/Earth

M

Polarity


loopimpedance

Zs

At ln

ms

RCD Operatingtimes

At 5 ln

ms

9 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

9 L2 --- --- --- --- --- --- --- --- --- --- --- --- ---

9 L3 --- --- --- --- --- --- --- --- --- --- --- --- ---

10 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

10 L2 --- --- --- 1.4 N/A --- > 200 > 200 > 200 1 N/A N/A

10 L3 --- --- --- --- --- --- --- --- --- --- --- --- ---

11 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

11 L2 --- --- --- 0.37 N/A --- > 200 > 200 > 200 0.62 N/A N/A

11 L3 --- --- --- 0.45 N/A --- > 200 > 200 > 200 0.55 N/A N/A

12 L1 --- --- --- --- --- --- --- --- --- --- --- --- ---

12 L2 --- --- --- 0.39 N/A --- > 200 > 200 > 200 0.6 N/A N/A 12 L3 --- --- --- 0.42 N/A --- > 200 > 200 > 200 0.48 N/A N/A


This form is based on the model shown in Appendix 6 of BS 7671:2008 amended 2011


12/12

ELECTRI CAL I NSTALLATI ON CERTI FI CATE

GUI DANCE FOR RECI PI ENT ( to be appended to the Certif icate)

This safety Certificate has been issued to confirm that the electrical installation work to which itrelates has been designed, constructed and inspected and tested in accordance with British Standard7671 (as amended) (The IET Wiring Regulations).

You should have received an original Certificate and the contractor should have retained a duplicateCertificate. If you were the person ordering the work, but not the user of the installation, you shouldpass this Certificate, or a full copy of it including the schedules, immediately to the user.

The 'original' Certificate should be retained in a safe place and be shown to any person inspecting orundertaking further work on the electrical installation in the future. If you later vacate the property,this Certificate will demonstrate to the new owner that the electrical installation complied with the

requirements of British Standard 7671 at the time the certificate was issued. The Construction(Design and Management) Regulations require that for a project covered by those regulations, a copyof this Certificate, together with schedules is included in the project health and safety documentation.

For safety reasons, the electrical installation will need to be inspected at appropriate intervals by acompetent person. The maximum time interval recommended before the next inspection it stated onPage 2 under 'Next Inspection'.

This Certificate is intended to be issued only for a new electrical installation or new new workassociated with an alteration or addition to an existing installation. It should not have been issued forthe inspection of an existing electrical installation. An 'Electrical Installation Condition Report' should

be issued for such an inspection.

This Certificate is only valid if a Schedule of Inspections and Schedule of Test Results are appended.

retained building kings yard site

Documents