revision to the operating instructions.st4 · revision to the operating instructions –...

Drive Technology \ Drive Automation \ System Integration \ Services

Revision

MOVIFIT® SC

Edition 01/2011 17069610 / EN

2

1 verviewupplement/Revision

1 Supplement/Revision

1.1 OverviewThe following amendments and revisions were made to the "MOVIFIT® SC" operatinginstructions:

• New entry added to the EBOX type code: Type "030 = 3 KW"

• New entry added to the ABOX type code: M12 motor protection switch

• Amendment to chapter "RUN PS" LED

• Revised "Error table" chapter

• Technical data added for type MTS11A030

INFORMATIONThis addendum describes amendments/revisions to the "MOVIFIT® SC" operatinginstructions, order number 11662611. Please observe the amendments and revisionsdescribed in the following chapters.

This document does not replace the detailed operating instructions.

OS

Revision to the Operating Instructions – MOVIFIT®-SC

1Type designation MOVIFIT® SCSupplement/Revision

1.2 Type designation MOVIFIT® SC1.2.1 EBOXNameplate The following figure shows an example nameplate of the EBOX of MOVIFIT® SC:

Type designation The following table shows the type designation of the EBOX of MOVIFIT® SC:

[A] External nameplate 9007200103334155[B] Internal nameplate [1] EBOX status field

[A]

[B]

[1]

[1]

14 12 15 ---- 12 -- -- 10

14 12 15 ---- 12 -- -- 10

MT S 11 A 015- 50 3 - P1 0 A - 00EBOX variant00 = Series

A = Version

Function level 0 = Classic1 = Technology

Fieldbus P1 = PROFIBUSD1 = DeviceNetE2 = PROFINETE3 = EtherNet/IP, Modbus/TCPZ1 = SBus slave

Connection type3 = 3-phase

Supply voltage50 = AC 380 – 500 VUnit power015 = 1.5 kW030 = 3.0 kW040 = 4.0 kW 1)

1) Available only with DV motors.

Version A

Series 11 = Standard (IP65)12 = Hygienicplus design (IP69K)Unit typeS = MOVIFIT® SC (motor starter)

MT = MOVIFIT® unit series

3

4

1 ype designation MOVIFIT® SCupplement/Revision

1.2.2 ABOXNameplate The following figure shows an example nameplate of the ABOX of MOVIFIT® SC:

Type designation The following table shows the type designation of the ABOX of MOVIFIT® SC:

[1] ABOX status field 9007200067321995

[1]13 12 -- --11 -- 10 10 --

MT A 11 A - 50 3 - S02 1 - D01 - 00 / M11ABOX optionM11 = Stainless steel mounting rail

ABOX variant 00 = Series

Maintenance switch D01 = Load disconnectorM12 = Motor protection switch up to 9 A1)

1) Motor protection switch M12 is mandatory for units with UL approval.

Fieldbus 1 = PROFIBUS2 = DeviceNet3 = EtherNet/IP, PROFINET, Modbus/TCP

Connection configurationS02 = Standard ABOX with terminals and

cable bushingsS42 = Hybrid ABOX with M12 for I/OsS52 = Hybrid ABOX with M12 for I/Os + busS62 = Hybrid ABOX with M12 for I/Os and

push-pull RJ45 for busConnection type 3 = 3-phase (AC)

Supply voltage 50 = 380 V – 500 V

A = Version

Series 11 = Standard (IP65)12 = Hygienicplus design (IP69K) 2)

2) Available in conjunction with CE.

Unit type A = Connection box

MT = MOVIFIT® unit series

TS


1Amendment LED "RUN PS" (motor starter status LED)Supplement/Revision

1.3 Amendment LED "RUN PS" (motor starter status LED)The following figure shows the "RUN PS" LED (shown unlit). In the sample figure, thePROFIBUS version is shown with "Technology" function level:

836134539

LED color

LED status Operating state Description

Yellow 2x flashing, break Ready, but manual operation without unit enable

24 V power supply and supply voltage OK.Stop manual mode to activate automatic mode.

DI0

3

DI0

1D

I02

DI0

0

DI0

4D

I05

DI0

6D

I07

DI0

8D

I09

DI1

0D

I11

DI1

2/D

O00

DI1

3/D

O01

DI1

4/D

O02

DI1

5/D

O03

SF/U

SR

BU

S-F

24V-C

24V-S

RU

N

RU

N P

S

MOVIFIT®

5

6

1 evisions to the error tableupplement/Revision

1.4 Revisions to the error table

Error Error no.

Sub-error no.

Inter-nal error no.

Cause Remedy

Motor-related error

"Output open" detected for drive 1

82 2 1 The measured output current of drive 1 is less than 2% IN,device when the drive is enabled.

Check the motor cable of drive 1.

"Output open" detected for drive 2

82 3 2 The measured output current of drive 2 is less than 2% IN,device when the drive is enabled for "dual-motor operation".

Check the motor cable of drive 2.

UL Protective functions for motor 1

84 7 1 Time violation of the limit of 750% IN, device on motor 1

Reduce the load on the driveChange parameter for soft startup time.

3 Time violation of the limit of 600% IN, device on motor 1






UL Protective functions for motor 2

84 8 2 Time violation of the limit of 750% IN, device on motor 2








RS


1Additional technical data for motor starter MTS11A030Supplement/Revision

1.5 Additional technical data for motor starter MTS11A0301.5.1 Version with operating point 400 V / 50 Hz

You find all the other technical data for the motor starter MTS11A030 in the "MOVIFIT®

SC" operating instructions, chapter "Technical Data" for MTS11A015 or MTS11A040.

1.5.2 Version with operating point 460 V / 60 Hz

You find all the other technical data for the motor starter MTS11A030 in the "MOVIFIT®

SC" operating instructions, chapter "Technical Data" for MTS11A015 or MTS11A040.

Motor starter MTS11A030Rated operating current (at 400 V) Imax AC 6.8 A (2 x 3.4 A)

Imin 0.5 A (2 x 0.5 A)

Motor starter MTS11A030Rated operating current (at 460 V) Imax AC 6.8 A (2 x 3.4 A)

Imin 0.5 A (2 x 0.5 A)

7

SEW-EURODRIVE—Driving the world

SEW-EURODRIVEDriving the world

www.sew-eurodrive.com

SEW-EURODRIVE GmbH & Co KGP.O. Box 3023D-76642 Bruchsal/GermanyPhone +49 7251 75-0Fax +49 7251 [email protected]

revision to the operating instructions.st4 · revision to the operating instructions –...

Documents