DO NOTSCALE FROM

THIS PRINT

QSS-XXX-XX-XX-D-RA-WT-XXXNo OF POSITIONS

-025, -050, -075, -100(PER ROW)

(SEE NOTE 4)

ROW SPECIFICATION-D: DOUBLE (USE QSS-25-01-D-XX-RA)

LEAD STYLE

PLATING SPECIFICATIONSEE TABLE 2

-RA: RIGHT ANGLE

OPTION-LS1: LOCKING SCREW (SEE FIG. 2, SHT 3) (FOR MATING WITH QTS-...-RA-..LS1)-MTI: THREADED INSERT (SEE FIG. 5, SHT 5)-SP: SOLDER PIN (NOT AVAILABLE W/LS1 OPTION) (USE SP-19-T) (SEE FIG. 3, SHT 4) -K: KAPTON PAD (SEE FIG. 4, SHEET 4) (USE K-500-300)

-WT: WELD TABN/A ON 25 POSITION

-01: .062 BOARD-02: .093 BOARD

.012 REF0.30.025 SQ0.64

REF (TYP) (SEE NOTE 4)

((No OF POS / 25) x .7875[20.003]) + .225[5.72] REF

.7838 REF19.91.069 REF1.75

"C" REF

((No OF POS / 25) x .7875[20.003]) + .005[0.13] REF

.186 4.71REF

.328 8.33 REF

.245 REF6.22

24 EQ SPACES@ .0250[.635]

7 EQ SPACES@ .080[2.03]

.096 REF2.44

.114±.003 2.89±0.08 (TYP) (SEE NOTE 4)

C2-F-MV

C3-F-MV

C15-A-CP

QSS-25-01-D-XX-RA

C3

02

01CL

LL

C2C C

.250 REF (TYP)6.35

((No OF POS / 25) x .7875[20.003]) + .550[13.97]

.560 14.22 REF

.280 7.11 REF

.006 REF0.15

((No OF POS / 25) x .7875[20.003]) + .300[7.62] REF

.250 MAX REF (TYP)6.35

.124 INSCRIBED3.15 REF (TYP) (SEE NOTE 9)

C1-A,F-DC

C14-A-CP

C1

C

FIG. 1QSS-075-01-XX-D-RA SHOWN

SHEET OF

UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN INCHES.TOLERANCES ARE:DECIMALS ANGLES.XX: .01 [.3] 2.XXX: .005 [.13].XXXX: .0020 [.051]

MATERIAL:.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP

BY:QSS-XXX-XX-XX-D-RA-WT-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTETHIS DOCUMENT CONTAINS INFORMATIONCONFIDENTIAL AND PROPRIETARY TOSAMTEC, INC. AND SHALL NOT BE REPRODUCEDOR TRANSFERRED TO OTHER DOCUMENTS ORDISCLOSED TO OTHERS OR USED FOR ANYPURPOSE OTHER THAN THAT WHICH IT WASOBTAINED WITHOUT THE EXPRESSED WRITTENCONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KEVIN B 01/22/02 51

SHEET SCALE: 1.5:1

INSULATOR: LCP, COLOR: BLACK

TERMINAL, GROUND PLANE & WELD TAB: PHOS BRONZE

F:\DWG\MISC\MKTG\QSS-XXX-XX-XX-D-RA-WT-XXX-MKT.SLDDRW

NOTES:

1. REPRESENTS A CRITICAL DIMENSION.2. BURR ALLOWANCE: .0010 MAX.3. MINIMUM PUSHOUT FORCE: 6 OZ.4. WELD TABS (WT-16-XX-T) NOT AVAILABLE ON -025 POSITION.5. IF NEEDED, -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.6. IM-1G18-XX-1-XX RETENTION TO BE 1.0 LBS. MINIMUM PRIOR TO SECOND ROW FILL.7. DESIGNED FOR USE WITH A .062 OR .093 THICK PCB8. ASSEMBLIES TO BE PACKAGED IN TRAYS.9. RECOMMENDED TORQUE ON HOLD DOWN SCREWS TO BE 20 IN-OZ +/- 5 IN-OZ.

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: info@SAMTEC.com code: 55322

REVISION Z

(SEE NOTE 4) "A"

.442 REF11.21

.010 REF0.25

(BOTH ROWS).001[0.00] - .006[0.15]

"B"

.113 REF2.87

.040 REF1.02

.025 REF0.64

.285 REF7.24

.1700 4.318

.0040 0.102

.207 REF5.25(SEE NOTE 4)

.354 REF8.99

.148 3.75(SEE NOTE 4)

C4-F-MV C5-F-CP

C6-B,F-DC

C7-F-CP

C10-F-CP

C11-F-CP

C12-F-CP

C13-F-OG

C8-F-CP

C9-F-CP

"F"

C-178-02-XX

IM-1G18-XX-1-XX (SEE TABLE 3)

WT-16-XX-T(SEE NOTE 4)(SEE TABLE 3)

C4

C6

C7

C8

C9

C10

C11

C12

C13

C5

C-177-01-XX

(SEE TABLE 3)

SEE TABLE 1

.018 REF0.457

30° TYP REF

DETAIL "F" SCALE 12 : 1

Z

SHEET OF

.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP

BY:QSS-XXX-XX-XX-D-RA-WT-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTETHIS DOCUMENT CONTAINS INFORMATIONCONFIDENTIAL AND PROPRIETARY TOSAMTEC, INC. AND SHALL NOT BE REPRODUCEDOR TRANSFERRED TO OTHER DOCUMENTS ORDISCLOSED TO OTHERS OR USED FOR ANYPURPOSE OTHER THAN THAT WHICH IT WASOBTAINED WITHOUT THE EXPRESSED WRITTENCONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KEVIN B 01/22/02 52

SHEET SCALE: 6:1

F:\DWG\MISC\MKTG\QSS-XXX-XX-XX-D-RA-WT-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: info@SAMTEC.com code: 55322

REVISION Z

FIG. 2QSS-075-01-X-D-RA-LS1 SHOWN

(SAME AS FIG. 1, EXCEPT AS SHOWN)

((No OF POS / 25) x .7875[20.003]) + .330[8.38] REF

"C" REF

.285 7.24 C16-B-CP

IN-PROCESS 1

C-177-01-XX

QSS-25-01-D-XX-RA

.424 10.77 C17-B-DC

IN-PROCESS 2

IM-1G18-XX-1-XX (SEE TABLE 3)

.442 11.21 C18-B-CP

IN-PROCESS 3

C-178-XX-XX

CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE

ASSEMBLY OPERATION START-UP INSPECTIONINSPECT CODE A

IN-PROCESS INSPECTIONINSPECT CODE B

FILL C-177-01-X C1, C14, C15 C16

FILL IM-1G18-XX-1-XX C1, C14, C15, C16 C17

FILL C-178-XX-X C1, C14, C15, C16, C17 C18

FILL WT-16-XX-T C1, C14, C15, C16, C17, C18 C6

SHEET OF

.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP

BY:QSS-XXX-XX-XX-D-RA-WT-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTETHIS DOCUMENT CONTAINS INFORMATIONCONFIDENTIAL AND PROPRIETARY TOSAMTEC, INC. AND SHALL NOT BE REPRODUCEDOR TRANSFERRED TO OTHER DOCUMENTS ORDISCLOSED TO OTHERS OR USED FOR ANYPURPOSE OTHER THAN THAT WHICH IT WASOBTAINED WITHOUT THE EXPRESSED WRITTENCONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KEVIN B 01/22/02 53

SHEET SCALE: 1.5:1

F:\DWG\MISC\MKTG\QSS-XXX-XX-XX-D-RA-WT-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: info@SAMTEC.com code: 55322

REVISION Z

((No. OF POSITIONS x .0315[.800]) - .246.10]) / 2 .020[.51]

.065±.010 1.65±0.25

.790 REF20.07

.250 REF6.35

"D" .020[.51]

QSS-075-01-X-D-RA-WT-K SHOWN(SAME AS FIG. 1, EXCEPT AS SHOWN)

FIG. 4

((No. OF POSITIONS /25) x .7875[20.0003]) + .300[7.62] .005[.13]

.035 REF0.89

.055 1.40

SP-19-T

QSS-25-01-D-XX-RA-SP

.081 REF2.06

QSS-075-01-X-D-RA-WT-SP SHOWN(SAME AS FIG. 1, EXCEPT AS SHOWN)

FIG. 3

SHEET OF

.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP

BY:

QSS-XXX-XX-XX-D-RA-WT-XXXDWG. NO.

DESCRIPTION:

PROPRIETARY NOTETHIS DOCUMENT CONTAINS INFORMATIONCONFIDENTIAL AND PROPRIETARY TOSAMTEC, INC. AND SHALL NOT BE REPRODUCEDOR TRANSFERRED TO OTHER DOCUMENTS ORDISCLOSED TO OTHERS OR USED FOR ANYPURPOSE OTHER THAN THAT WHICH IT WASOBTAINED WITHOUT THE EXPRESSED WRITTENCONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KEVIN B 01/22/02 54

SHEET SCALE: 1.5:1

F:\DWG\MISC\MKTG\QSS-XXX-XX-XX-D-RA-WT-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: info@SAMTEC.com code: 55322

REVISION Z

.274 6.96REF

QSS-075-01-X-D-RA-WT-MTI SHOWN(SAME AS FIG. 1, EXCEPT AS SHOWN)

FIG. 5

((No. OF POSITIONS /25) x .7875[20.003]) + .662[16.80] REF

((No. OF POSITIONS/25) x .7875[20.003]) + .947[24.04] REF

#4-40 THREAD REF

.081 REF2.06

SHEET OF

.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP

BY:

QSS-XXX-XX-XX-D-RA-WT-XXXDWG. NO.

DESCRIPTION:

PROPRIETARY NOTETHIS DOCUMENT CONTAINS INFORMATIONCONFIDENTIAL AND PROPRIETARY TOSAMTEC, INC. AND SHALL NOT BE REPRODUCEDOR TRANSFERRED TO OTHER DOCUMENTS ORDISCLOSED TO OTHERS OR USED FOR ANYPURPOSE OTHER THAN THAT WHICH IT WASOBTAINED WITHOUT THE EXPRESSED WRITTENCONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KEVIN B 01/22/02 55

SHEET SCALE: 1.5:1

F:\DWG\MISC\MKTG\QSS-XXX-XX-XX-D-RA-WT-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail: info@SAMTEC.com code: 55322

REVISION Z