revved 4 2008 promotional catalogue - cost less … · metric tap & die set ... m10x1.0,...

Included Tips

Length: W/tipWeight: W/GasApprox Temp Sold TipTorch TemperatureGas Container Cap.Operating Cap.One gas fill. AtMid setting

245mm265g

0250 - 550 C01300 C

38 ml (LEC)120 min

Specifications

Automatic Ignition Portable Multi-Function Heat Tool Kit

Applications

Automotive & truck repairsElectrical ComponentsField repairsShrink tubingSolder circuit boards

Equivalent to a power range of 30 - 125 Watt. Cordless, simple and safe operation anywhere. Ready to use in 15 seconds after ignition.

Unit colour may differ from displayed image

PRO-120K

®

Telescopic Inspection Mirror & Pick-Up Tool

featuring ball joints and telescopic handles for reaching into confined spaces. handles extend from 245mm to 520mm. The pick-up tool has an enclosed magnet with a 1 lb lifting capacity. The inspection mirror O.D: 50mm.

The telescopic

SU7032

Includes offset ratchet driver,includes double ended bit.Phillips:#2Slotted: 6.0mm

DA9369

DA9370

DA9371

DA9372

For cutting copper and aluminum 2cable up to 150mm

Overall Length: 420mm

2For cutting copper and aluminum cable up to 250mmOverall Length: 600mm

2For cutting copper and aluminum cable up to 400mmOverall Length: 700mm

For cutting copper and aluminum2cable up to 100mm


Aviation Snips

DA9493Left Cut

DA9494Straight Cut

Cuts up to 18 gauge cold rolled steel.

DA9495Right Cut

Folds out toclean burrs.

Hardened cutting wheel cuts 1/8” to 1-1/8” (3 - 30mm) overall diameter range.

Tube Cutters

DA3775

Mini Tube Cutter wheel cuts 1/8’ to 5/8’’ (3 - 15 mm) O.D. range.

Hardened alloy steel cutting

DA3770

E4700B

Air Saw

Capacity: 1.6mm mild steelStroke/Min: 10,000Stroke Length: 10mmAvg Air Cons: 1.2 CFM With Safety Lever 1/2” Square Drive

CORDLESS Impact Wrench Kit

Cordless electric impact wrench with soft grip for comfort. Rear dial provides the user with six different torque settings. 1 hour quick recharge with auto cut off. Includes two 19.2 volt NI-CD batteries and sturdy plastic carry case.

SpecificationsNo-Load Speed: 1800 rpmMax Torque: 540 Nm (398 ft-lb)Net Weight: 3.2 kgOverall Length: 254mmBattery Pack Type: Slide-In

19.2 volt

HUGE SALE

Offset Ratchet Driver

777

Stores advertised on this page of this catalogue are independent businesses. Every effort is made to ensure advertised stock is available, but due to factors beyond the control of Endeavour Tools Pty Ltd, products advertised in this catalogue may not be available at all stores. Pricing for products include GST and recommended only. Certain items may incur a freight charge in some stores. Endeavour Tools Pty Ltd reserves the right to correct printing errors and omissions. All sizes shown are approximate only, and accessories shown with the product are not included unless specified. All products in this catalogue were available at the time of preparation and Endeavour Tools will, within reason ensure stock of advertisedproduct is available, but cannot be held responsible for unforseen shortfalls beyond their control.

*All items are subject to availability *All prices are EACH and INCLUDE GST *

Your DistributorEndeavour

IWJA-1924T

Cable Cutters

NEWTool

Circuit Tester - Heavy Duty

DA1320

Power on type tester for 6, 12, 24 Volt AC & DC. Durable 4" cellulose acetate handles. 121mm stainless steel probe with point cover. 1500mm cord with heavy duty ground clip.

All Prices are Each & Include GST E & O.EAll Prices are Each & Include GST E & O.E

© E

nd

ea

vou

r To

ols

Pty

Ltd

02

08

z

MADE IN JAPAN

RWTUV

1015.$

50643.$

3517.$

8010.$

40164.$

008.$

2011.$

8015.$Each Aviation Snip

85236.$

6076.$

9582.$

3584.$

00105.$

BONUS SOCKETS

Includes Impact SocketSizes: 17, 18, 19 & 21mm

MADE IN JAPAN

Durable & Strong

Ergonomically correct design. All Airboy air inlets are made from

hardwearing Acetal Plastic that’s harder than brass.

Denmark

ENDEAVOURAIR TOOLS

MADE IN JAPAN

12 Month parts & labour warranty on all Endeavour Air Tools.

8mm Straight Pipe

124140100

8mm Bent Pipe with Rubber Tip

124140101R-TIP

124140112 300mm

124140113 500mm

124140114 1000mm

These extra 8mm straight pipe blow guns make it possible to clean places which are difficult to access.

long

EXTRA LONG 8mm Straight Pipe Blow Guns

Standard Blow Gun

Rubber TipBlow Guns

E1065

Impact Driver

Two Hammer ClutchReversible

Screw Capacity: 6mmMax Torque: 47.9 ft.lbsDrive: 1/4” HexFree Speed: 11,000 rpm

E1166 E1166-8

Air ScrewdriversReversible

Capacity: 6mmMax Torque: 15.0 NmDrive: 1/4” HexFree Speed: 1,800 rpm

Capacity: 8mmMax Torque: 24 NmDrive: 1/4” HexFree Speed: 800 rpm

E1430

1/2” Air Impact Wrench

Bolt Capacity: 16mmMax Torque: 280 ft.lbsWorking Torque: 0-243 ft.lbsAvg Air Cons: 4.2 CFM

Twin Hammer

E1770T

1’’ Air Impact Wrench

Bolt Capacity: 38mmMax Torque: 0-1,700 ft.lbsWorking Torque: 0-1,250 ft.lbsAvg Air Cons: 12.3 CFM

E5200

Air DrillsNon-Reversible

Chuck Capacity: 13mm -1/2”Drilling Capacity: 13mmFree Speed: 600 rpmAvg Air Cons: 3.5 CFM

E5305

Reversible

Chuck Capacity: 10mm - 3/8”Drilling Capacity: 10mmFree Speed: 2,000 rpmAvg Air Cons: 3.9 CFM

Rubber Grip

60pce Tap & Die Set Combination

TD-60H

Metric & Imperial sizes. Made of Carbon Steel.

110 pce Metric Tap & Die SetAttache type metal case for use in industrial, automotive and repair shops. “T” type tap holder.Die stock: 1” O/D (25.4mm)1 1/2” O/D (38.1mm)

Tap wrenches:No. 6No. 4

Sizes: M2 to M18 in metric fine & course threads.Taps: 70 piecesDies: 35 piecesMade of Carbon Steel

110-110M

124142130

Plastic Pipe Engine Cleaning Guns0.75 ltr plastic canister suitable for most liquid cleaning agents. The plastic pipe and nozzle overcomes corrosion problems with the metal nozzles. The nozzle is made from the same hardwearing plastic as the blow guns. The adjustment nut on the nozzle allows for the adjustment of the spray from the nozzle.

Pipe Length: 150mm

124142135Pipe Length: 200mm

124145102

Sandblasting Kit

For ordinary use, use a sand No. 00 with grain size of 0.3mm - 0.6mm.

For rougher work, use a sand No. 0 with grain size 0.4mm - 0.8mm

The sandblasting kit is used to remove rust, old paint and dirt. Includes suction pipe and protective full face mask. Carbide nozzle available as optional accessory.

For Removing Rust, Old

Paint and Dirt.

Ratchet Tap HoldersEasy to use ratchet operation means it can easily be operated with only one hand. These tap wrenches are made of fully hardened alloy steel.

Capacity: 0.6 - 1.5 kgWork Air Pressure: 7 kg/cm2Tube Length: 90 cm ~ 200 cmNet Weight: 0.86 kgOverall Length: 700mmAir Inlet: 1/4” NPT

Hose Reel 0.5 - 1.5 Kg

AT02

Rubber Grip

4NC/40, 6NC32, 8NC32, 10NC24, 12NC24, 10NF32, 1/4NC20, 5/16NC18, 3/8NC16, 7/16NC14, 1/2NF20, 1/4NF28, 5/16NF24, 3/8NF24, 7/16NF20, 1/2NF20, 1/8NPT27 M3X0.5, M4X0.7, M5X0.8, M6X1.0, M7X1.0, M8X1.25, M9X1.25, M10X1.5, M10X1.0, M12X1.75

Contains:Die Stock with adjustable guide.Adjustable Tap Wrench, T-Handle Tap Wrench Screw Pitch gauges, inch & metric, ScrewdriverTaps: (27 pcs.) Dies: (27 pcs.)

TR-310Sleeve Length: M3-M10

TR-512Sleeve Length: M8-M12


Rubber Grip

60233.$20355.$

80987.$

30198.$

2586.$

75545.$

50230.$

2539.$

0557.$

35315.$ 90373.$

90290.$

Air Blow Gun

0013.$

1023.$

9526.$

8030.$

1013.$

0040.$

0037.$

8087.$

Length: W/tipWeight: W/3x BatteryApprox Temp Sold TipBatteriesTime to reachOperating TempApprox. No. of SolderJoints Intermittently

190mm116g

0500 C3-1.5V Alkaline AA

0185 in 12 seconds

160 Joints/ UsingNew Batteries

Specifications

Battery Powered DualFunction Solder & Flashlight

Applications

General Electronic RepairsField ServiceFocused Flashlight

Rapid 12 second heat-up. Lightweight and compact for emergency tool kit.

Batteries Not Included. Unit colour may differ from displayed image

PRO-35K

HeightLengthWeight w/o fuelTorchGas Container Cap.Operating Cap.One gas fill. AtMid setting

175mm120mm300g

01350 C60 ml90 min

Specifications

Automatic Ignition ButanePowered Pro Torch

1350°C

Applications

BrazingSolderingPlumbingTool and Die ShopsAutomotive & Truck RepairsIndustrial MaintenanceElectronic Repairs

State of the art Waterproof Piezo Electronic Ignition system. Up to 120 minutes use on each filling. Powerful Wind-Resistant flame. Sturdy heavy dutyribbed aluminum body with comfort grip. High output flame for large jobs. Uses butane fuel that’s available almost anywhere.

Unit colour may differ from displayed image

PT-500

E2001S

Air Die GrinderWith Safety Lever

Collet Size: 1/4’’Free Speed: 25,000 rpmAvg Air Cons: 2.7 CFM

Available Optional: 1/8’’ Collet3mm Collet6mm Collet

E2515LA

5’’ Air Disc Grinder

Disc Size: 5’’Spindle Size: M14 x 2Free Speed: 10,000 rpmAvg Air Cons: 2.8 CFM

Polymer Body

Safety Lever

E3200

Oscillation Sander

Pad / Disc Size: 75 x 70mmStrokes/Min: 19,000Stroke: 2.3 mm (max)Oscillating Angle: 2.8°

E2022S

Air Extended Die Grinder With Safety Lever

Collet Size: 1/4’’Free Speed: 22,000 rpmAvg Air Cons: 4.5 CFM

AT01

Spring Balancer,0.6 kg - 1.5 kgCapacity: 0.6 kg - 1.5 kgLine Length: 1000mmNet Weight: 0.5 kg

AT217

Air HammerComplete with 4 Chisel Set

Shank Opening: 10.2mmBlow/Min: 4,500Bore Diameter: 19.05mmAvg Air Cons: 4.5 CFM

DA7361

3/8" Drive Torque Wrenches3/8" square drive. Torque range: 0-108Nm (0-80 ft/lbs).

DA7366 3/8" square drive. Torque range: 2.3-22.6Nm (20-200 in/lbs)

DA7362

1/2” Drive Torque Wrench1/2" square drive. Torque range: 0-203Nm (0-150 ft/lbs).

DA1268

Gauge Set - Screw PitchSAE & Metric 2 gauges for gauging of American national standard threads. SAE: 12, 13, 14, 16, 18, 20, 24, 27, 28, 32, 36, 40 Metric: 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, 1.5, 1.75, 27, 28. 12 blades in each tool.

AT710

10mm Air Belt Sander AT713

20mm Air Belt Sander

Belt Size: 20mm x 520mmBelt Speed: 16,000 rpmAvg Air Cons: 6.0 CFMBelt Size: 10mm x 330mm

Belt Speed: 16,000 rpmAvg Air Cons: 6.0 CFM

Capacity: 3/16” maxAir Pressure: 90 psi

Rivet Sizes: 3/32”, 1/8”, 5/32”, All Materials3/16” Aluminum and Steel

Air Riveter Kit 3/6” Capacity

AT103K

Kit Contains: ·AT103 Riveter·Plastic Carry Case·1 Valve Pusher Complete·1 Hose 5/16” Connection·1 Jaw Pusher Spring·2 Return Springs·1 Oiler, Blow Case, Joint Nut, O-rings·Nosepiece: 3/32”, 1/8”, 5/32”, 3/16”. 15pcs 5/32”, 15pcs 3/16”.·Spanner Gauge (14mm, 17mm)·Spanner (10mm, 15mm, 24mm)

Torque Wrenches

3/8” CORDLESS Right Angle Drill

AGAB1920V

Cordless electric right angle drill with softgrip for comfort. Heavy duty keyless chuck.Reversible with 2 speeds. 1 hour quick recharge with auto cut off. Includes two 19.2 volt NI-CD batteries and sturdy plastic carry case.

SpecificationsSpeed High: 0-1600 /minSpeed Low: 0-450 /minMax Torque: 310 kg-cmChuck Capacity: 0.8 - 10mmNet Weight: 2.4 kg

19.2 volt

Included Tip


NEWTool

AT24

Needle ScalerComplete with Needles

Number Needles: 24Blow/Min: 3,500Needle Diameter: 3 x 180mmAvg Air Cons: 7.8 CFMOverall Length: 348mm

NEWTool

®

®

30141.$

80266.$

60336.$

70233.$

1042.$

75164.$

3048.$

00386.$

90160.$55244.$

308.$

5586.$

8558.$

25496.$

6566.$

6067.$

0567.$

A Must For Any Tool Box

Great For Those Hard To Reach Applications

Also Drives

PART NO. SIZE BLADE SIZE BLADE BLADE TOTAL

LENGTH WIDTH LENGTH

PHILLIPS

888-1X75 #1 X 75 #1 75 mm 5.5 mm 165 mm

888-2X100 #2 X 100 #2 100 mm 6.3 mm 211 mm

888-2X150 #2 X 150 #2 150 mm 6.3 mm 261 mm

888-2X200 #2 X 200 #2 200 mm 6.3 mm 311 mm

888-2X300 #2 X 300 #2 300 mm 6.3 mm 411 mm

888-3X150 #3 X 150 #3 150 mm 8.0 mm 275 mm

SLOTTED

888-5-5X75 5.5 X 75 5.5 mm 0.7 mm 75 mm 5.5 mm 165 mm

888-6X100 6.0 X 100 6.0 mm 0.8 mm 100 mm 6.3 mm 211 mm

888-6X150 6.0 X 150 6.0 mm 0.8 mm 150 mm 6.3 mm 261 mm

888-6X200 6.0 X 200 6.0 mm 0.8 mm 200 mm 6.3 mm 311 mm

888-6X300 6.0 X 300 6.0 mm 0.8 mm 300 mm 6.3 mm 411 mm

888-8X150 8.0 X 150 8.0 mm 1.0 mm 150 mm 8.0 mm 275 mm

PART NO. SIZE BLADE BLADE TOTAL

LENGTH WIDTH LENGTH

222-C-T5 T-5 75 mm 3.0 mm 143 mm

222-C-T6 T-6 100 mm 3.0 mm 166 mm

222-C-T7H T-7 100 mm 3.0 mm 166 mm

222-C-T8H T-8H 100 mm 3.0 mm 166 mm

222-C-T9H T-9H 100 mm 3.0 mm 166 mm

222-C-T10H T-10H 125 mm 4.0 mm 215 mm

222-C-T10HLG T-10H 250 mm 4.0 mm 345 mm

222-C-T15H T-15H 125 mm 4.0 mm 215 mm

222-C-T15HLG T-15H 250 mm 4.0 mm 345 mm

222-C-T20H T-20H 125 mm 5.0 mm 215 mm

222-C-T20HLG T-20H 250 mm 5.0 mm 345 mm

222-C-T25H T-25H 125 mm 5.0 mm 215 mm

222-C-T25HLG T-25H 250 mm 5.0 mm 345 mm

222-C-T27H T-27H 125 mm 6.3 mm 236 mm

222-C-T30H T-30H 125 mm 6.3 mm 236 mm

222-C-T30HLG T-30H 250 mm 6.3 mm 345 mm

222-C-T40H T-40H 125 mm 7.0 mm 250 mm

Hardened Tip

PART NO. Hex TOTAL

Size LENGTH

HB-15 1.5 mm 145 mm

HB-20 2.0 mm 150 mm

HB-25 2.5 mm 180 mm

HB-30 3.0 mm 205 mm

HB-40 4.0 mm 220 mm

HB-50 5.0 mm 240 mm

HB-60 6.0 mm 260 mm

HB-80 8.0 mm 300 mm

Ball Ended Hex Driver

Deep Sleeve DriversDriver has a 60mm sleeve that can go down over bolts to tighten nuts.

8000-B-8MM

8000-B-10MM

Hex Opening:8mmO.L: 260mm

Hex Opening:10mmO.L: 260mm

Push lockingMechanism

“Tang-Thru”

HIGH-SOFT Grip Screwdriver"Tang-Thru"

Comfortable cushion grip. Colour coded - separate colour for phillips & slotted."Tang-Thru" - can be struck with a hammer (not to be used as a chisel). Chrome-Vanadium steel and magnetized.

Hardened TipsHexlobe (Torx®) screwdriversEfficient torque transfer. Doesn't damage grooves of the screw. Made from hardened steel. Hardened steel tip

Scrapers

380Scraper width: 21mmTotal length: 270mm

Ideal for scraping dried paint, rubbing off rust or carving at corners of aerated concrete. Tang through type is durable for heavy impact work. Blade is made of special steel, that is rust resistant and chrome plated.

385Scraper width: 16mmTotal length: 184mm

“Tang Thru”

Flexible Shafts

FBS-195Width: 18mmTotal length: 195mm

Includes flexible shaft, 45mm hex bit and double ended Phillips #2. Shaft is capable of being used up to 6000rpm. Max torque: Clockwise 160kg/cm; anticlockwise 140kg/cm.The shaft is designed for driving screws. Can also be used for removing, however not on a continuous basis as the internal wire can unwind.

FBS-300Width: 18mmTotal length: 300mm

Extra Long Bit Holders

Extra long for very hard to reach places. 1/4” hex drive fits directly into screwdriver. Supplied with Phillips #2 double-ended bit andremovable rotating safety handle.

JL-600Length: 600 mm

JL-300Length: 300 mm

Convenient drivers for minor fastening jobs. Ideal for work in extremely narrow spaces.

“Mini-Stubby” Screwdriver

Phillips #2 & Slotted 6.0mmOL: 42mm

98

Ball Ended Hex Drivers

T-Grip Hex Key Set

6560

This 6 piece set of ChromeMolybdenum Steel “T” Grip hex keys includes 2.5, 3.0, 4.0, 5.0, 6.0 and 8.0mm hex keys and comes complete with a durable steel stand.

Ratchet Driver

1236RH

The latest in multi-function bits. Slots in screwdriver head drives wing nuts, thumb screws, L hooks and eye hooks.

3/4" Square Drive Adjustable Torque Wrench

ARD500B2

E DU IG SO PL LA AYNA

EXTR

A LO

NG

Includes double ended bit. One end drives Phillips #1, #2; #3, the other end drives slotted 6.0mm screws.


Board Ripsaw

BN-200

Cuts through wallboard, plasterboard and woodenframes. Suits builders, plasters, electricians, plumbers and the home handy man. Can also cut through plastic dashboards and plastic interior panels of car doors for installing speakers and CD players in vehicles. Non-Retractable Blade. Includes 1 pull cutting blade.

Optional Blades for BN-200

BN-201Includes: 2 pull cutting blades

BN-202Includes: 2 push cutting blades

MADE IN JAPAN

Square Drive: 3/4” Gear Teeth: 40 Torque Range: 140-700 Nm Overall Length: 1032mmHead Depth: 25mm

15°offset

enables access

in difficult

situations

Reversing button on sideof the wrench.

72 Teeth Combination Button TypeReversible Wrench Set

7 imperial wrenches in a plastic blow mold case.Includes sizes: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 & 3/4”

PFG872-IMPPrice Per Set

MADE IN JAPAN

00594.$

30122.$

$9.80

$9.80

$9.80

$9.80

$9.80

$12.05

$12.20

$12.05

$12.75

$12.25

$12.75

$12.25

$12.75

$12.25

$12.25

$14.40

$13.05

$4.75

$5.35

$5.90

$7.10

$8.30

$9.05

$11.65

$16.15

$7.10

$9.00

$10.35

$12.55

$15.20

$13.30

$7.10

$9.30

$10.35

$12.55

$15.20

$12.20

7546.$

9011.$6510.$

PRICEEACH

PRICEEACH

PRICEEACH

2525.$ 2031.$

5517.$ 7010.$

8020.$2524.$

MA

DE IN

JA

PA

N

2018.$

658.$ 658.$

1013.$156.$

25-RH206Full turning ratchet.1/4” DriveChrome Vanadium

35-RH306Full turning ratchet.3/8” DriveChrome Vanadium

25-RH211Full turning ratchet.1/4” DriveChrome VanadiumRubber hand grip

35-RH311Full turning ratchet.3/8” DriveChrome VanadiumRubber hand grip

1/4” & 3/8” Square Drive FULL TURNING Ratchets

Overall Length: 11”

3/8”

3/8”

1/4”

1/4”

Overall Length: 6”

Swiveling head50 Nm Max Torque

3pce 3/8” Sq DriveExtension Set

35-2000 Length: 75mm, 150mm & 250mm 1/4” and

3/8” Drive Torx Socket Set

2-ETS7 1/4” dr: E6, E7, E8 3/8” dr: E10, E12, E14, E16 Supplied on Socket Rail

Screwdriver Magnetic Bit Holder

ATBH-1025 Magnetic female 1/4” hex drive and bit storage space in handle.

Flexible Driver Set

742TD-130

Power soft grip with flexible shank and bit belt holder, set includes:Phillips: 1, 2, 3Slotted: 4, 6 O/A: 33.3mm

T-Bar Driver with 10 Bits

742TD-150 Set includes: T Bar Screwdriver, Bit belt holder Phillips: 1, 2, 3 & Slotted: 4, 6 Hex: H2.5, H3, H4, H5, H6

Ratchet Driver Set

742TD-70Includes:Power grip ratchet screwdriverBit belt holderHex: H2.5, H3, H4, H5, H6Phillips: 1, 2, 3Slotted: 4, 6

Flexible Shaft

25-2000

1/4” 5pce extension set. Hex head for use with spanner and knurling for better grip.Lengths included are: 25, 50, 100, 150 & 200mm

5pce 1/4” Sq DriveExtension Set

Made In Spain

Size 92mm Capacity 12mm Weight 120g

GO2PK1010-111Includes:Sturdy Carry PouchHandy Grip Holder Unit111-10-BL Curved Jaw 10” Plier

Handy Twin Packs

112-05-BL

Length: 135mmCapacity: 30mmWeight: 190g

EPOXY RESIN

COATED121-12-BL

Length: 300mmCapacity: 75mmWeight: 890g

Curved Jaw Plier with Wire Cutter

GO2PK111-111Includes:Sturdy Carry Pouch111-10-BL Curved Jaw 10” Plier111-07-BL Curved Jaw 7” Plier

Made In Japan

3/4” Sq DriveExtension 65-6110


Micro Grip

MG2K-040

Made In Spain

®

Insulated Screwdriver Set

Each screwdriver protects against up to 1000 volts of electricity. Set contains: Phillips #0, #1 & #2 and slotted 1/8", 5/32", 7/32" & 1/4".

DA9615

Straight Jaw Plier

Made In Japan

Made In Spain


Made In Japan

With Knurled Shank & Hex Head

Made In Japan

EPOXY RESIN

COATED

856.$

4015.$

6514.$

0018.$

4530.$

7521.$

4524.$

8020.$

5561.$

5561.$

1081.$

2583.$

2032.$

6031.$

1533.$

NEWTool

3015.$

4537.$

5028.$

Telescopic Magnetic Pick-Up Tool with Needle

Multi-purpose needle, for spray nozzle cleaning and adjusting, line marking and sparkplug clean up. Magnetic tip for picking up small parts with telescopic end extending 150 to 670mm. Includes pocket clip.

DA6998

DA7296

7 piece Imperial size spanners in a plastic case. Includes sizes: 3/8", 7/16", 1/2”, 9/16",5/8", 11/16" & 3/4".

Stubby Spanner Set

Flare Nut Spanner Set

Made from chrome-vanadium steel & heat treated. Extra thick to avoid damage to soft metal fittings. 10x12, 13x14 & 15x17mm sizes.

DA7302

Safety Wire Twist Pliers

These wire twist pliers have automatic spring return and feature a right hand twist. Made from forged alloy steel, tapered jaws for easy access to confined areas, mated cutting edges to cut safety wire to 1/16" diameter and a long life mechanism.

Screw Extractor Set

DA12236 coarse threaded twist style extractors for easy removal of broken studs or screws. Made from heat treated chrome-moly steel. Sizes: 1/8", 1/4", 5/16", 7/16", 9/16" & 3/4".

Plastic Funnel with Strainer

DA0097Durable plastic funnel with strainer O.D. Funnel opening 150mm. Includes two spouts.

Flat Nose Retaining Ring Plier

DA0153Maximum Spread: 38mmOverall Length: 240mm

DA2899

Professional Snap Ring Plier Set

Retaining ring set, for internal and external use. Changeable alloy tips. Tempered steel professional circlip pliers set for internal & external use. Replaceable tips & spring ratchet locking mechanism to hold snap rings securely.

Vacuum Suction Cup

6" cup pulls out panel dents safely and easily. Can also be used for many other jobs including holding windshields for installation & lifting metal or plastic. Swivel steel bar permits pull with chain & jack. No trigger or gum to break off, simply lift the lipped edge to release vacuum.

DA6806

Cleaning Brush Set, Stainless Steel

DA1104 190mm steel handle. Stainless steel bristles. Consists of a curved and straight brush.

DA1207Forged steel square drive swivels 180 degrees. Strong chrome vanadium steel handle for any tough job.

Breaker Bar 1/2” Drive 24” Extra Long

DA6822

Sanding Block - PlasticDurable, lightweight ABS plastic. Features spring control sand paper loading clips for easy and fast performance. 106 x 212mm block size.

DA7004

Magnetic Pickup Tools

Telescopic from 125 to 635mmMagnetic capacity 2.2kgwith pocket clip

DA7047 Stainless steel telescoping shaft. Extends from 7" to 30". This magnet is ringed with a flexible insulating sleeve to make it convenient to pick up items. Magnetic Capacity 3.6 kg

DA9047

4pce Fluid Line Clamp SetThis tool helps stop hose liquid flow without damaging the hose. Suits hose sizes: 10mm, 15mm, 25mm, 45mm.

10 Piece Screw Extractor KitContains five spiral extractors #1 through #5 and five mechanicslength HSS drills. Removes bolts and screws up to 5/8”. Left hand extractors with right hand drills. Contains HSS drill sizes 5/64, 7/64, 5/32, 1/4 & 19/64”. Screw extractor sizes 5/64, 7/64, 5/32, 1/4 & 19/64”.

DA9178

3pce Punch Set Pin / Drift

DA9081

Non-sparking solid brass punches designed to prevent damage to the object being struck. Contains: 1/4" x 4" & 3/8" x 6" pin punches and 1/2" x 8" drift punch.

Letter Punch Set

DA9076

Made from hardened alloy steel. 10mm punches.

DA9469OL. 225mm

DA9470OL. 170mm

Nut Splitter

DA1226

Used when access over the nut is NOT possible. Works on rusted or frozen nuts up to 15/16" (23mm).

DA3957

For double or single flares on copper, brass, soft steel or aluminium tubing with sizes: 4.75, 5, 6, 8, 10mm, 1/4" & 1/2" O.D.

Double Flaring Tool Kit


GETTHE RIGHT

GEAR

4511.$

5010.$

7519.$

0059.$

4043.$

6022.$

6527.$

3028.$

1013.$

8025.$

1538.$

2515.$

0040.$

3543.$

8510.$

6530.$

5012.$

057.$

7512.$ 3515.$

9066.$NEW

Tool

revved 4 2008 promotional catalogue - cost less … · metric tap & die set ... m10x1.0,...

Documents