rfid i danmark presents: rfid conference2015.rfididk.org/wp-content/uploads/2015/05/rfid_i... ·...
TRANSCRIPT
RFID i Danmark presents:
RFID Conference International RFID Conference in Copenhagen May 21’st
Probably the largest RFID Events in Scandinavia in 2015We are very pleased to invite to what is probably the largest RFID Event in Scandinavia in 2015. Following up on the successful conferences in 2011, 2012, 2013 and 2014, RFID i Danmark and partners are organizing this Conference with international keynote speakers, exhibition, networking and a number of actual end-user case study presentations.
IT-University of Copenhagen · Rued Langgaards Vej 7 · DK-2300 Copenhagen S
Registration: 2015.rfididk.org/registration/
Cases:
Organizers:
Efficiency increase by RFID in tool-making and tool- management. In tool-making and tool-management it is required to identify each individual compo-nent whenever a tool is moved, installed or maintained. Identifica-tion is usually enabled by code engraved or printed on a surface or by an attached ID plate. This kind of identification, as well as paper instructions, is prone to mechanical defects and mistakes due to its manual read-out.
Pervasive RFID! Keynote presen-tation by Pankaj Shukla, Director, Global RFID Market Development at Zebra TechnologiesOver the last decade, RFID has established itself as a technology of immense value because of its high accuracy, speed of use and ability to solve variety of use cases in multiple verticals.
New Danish RFID case in manu-facturing – Hilding Anders Hilding Anders has been helping people get a good night’s sleep since 1939; “We are proud to deliver beds and mattresses for all needs – from the most basic, to the most exclusive. Over the last decade, Hilding Anders has acted as a consolidator in the European bedding industry. 14 acquisitions in ten years have made Hilding Anders the undisputed leader in their core geographies: Europe and Asia..
Keynote by Frank Honore, Google. The RAIN Alliance was founded in 2014 to promote, educate and increase aware-ness of UHF RFID to businesses and consumers worldwide. AIM Global, Impinj and Smarttrac were not very surprising as organisa-tions behind the initiative but on the list were as well Intel and Google. For the first time the RAIN Alliance will be properly introduced to Scandinavian companies and organizations.
-
Increased efficiency and competitiveness
through tracking and tracing
Implementation of tracking and tracing technologies
– typically by the use of radio waves – have already in-
creased efficiency and competitiveness for a number of
companies, in Denmark and around the world.
But, most companies – private as well as public – haven’t
even started yet.
At the annual RFID i Danmark conference, a number of
leading Danish and international companies will share
their experiences;
1 Why did they implement tracking and tracing techno-
logy?
2 Have significant advantages been achieved?
3 How could they justify the initial investment?
4 What Lessons learned during the implementation of
tracking and tracing?
5 What to do different, if they were to start from scratch
again?
6 Future plans with more tracking and tracing?
You can meet representatives from companies using
RFID in their production, logistics, retail business, service
maintenance history, localisation of employees and as-
sets – along with representatives from both manufactur-
ers of RFID equipment and tags as well as providers of
RFID based solutions.
They will share with you their experiences on how they
use RFID to optimize processes and create business value
in their particular company.
We will have high level visionary key note presentations
in plenum and we will again this year go into smaller
groups in parallel tracks.
This year we will have a track with use cases and in par-
allel we will have two WORKSHOPS. The focus of the use
cases will not be on the technologies, but rather on how
companies achieve advantages through the use of the
technologies.
The list of presentations will continuously be updated
here PRESENTATIONS where you also can find further
information about each presentation.
To learn more about current solutions and products you
get this unique opportunity to explore our RFID exhibi-
tion. Where suppliers will be ready to explain, demon-
strate and answer your questions. The list of exhibition-
ers will be updated on EXHIBITORS..
Henrik B. Granau
Founder of RFID i Danmark
The conference offers
· Insight in innovative RFID solutions
· Insight into RFID cost / benefit
· Inspiration for your own business
· Networking and knowledge sharing
Welcome
RFID i Danmark 2015 Conference
-
IT-Universitetet, CopenhagenThe IT University of Copenhagen is the youngest university in
Denmark (established in 1999). The IT University strives to create
value with IT and deliver top quality research and education within
a wide range of information technology subjects; from e.g. design
and games development to business and computer science.
Approximately 2,500 students are enrolled at the university, and it
has a staff close to 500, among them 50 PhD’s and 70 tenured fac-
ulty. More than half of the latter are from abroad. Most researchers
participate in collaborative projects with private companies, public
institutions and foreign researchers.
Web: www.itu.dk
Contact: Jørgen Staunstrup, [email protected]
.
Keynote presentations andWrap-up & Closing remarks
RFID i Danmark
It is the intention that on a non-profit basis the network is to be the gathering of all RFID activities in Denmark
and the purpose is to create opportunities and enhance competitiveness of both public and private companies
in Denmark through usages of RFID technology.
The network, which is organised as an association, works to reach its goals through exchange of experience,
construction of a public accessible knowledge database about RFID, newsletters and hosting of events.
Main sponsor:
Platin sponsor:
Denmark
Granau IT
Denmark
Premium sponsor:
Sponsors:
-
08.00-09.00
09.00-09.15
09.15-09.30
09.30-09.50
09.50-10.20
10.20-10.50
10.50-11.00 11.00-11.30
11.30-12.40
12.40-13.40 13.40-14.50 14.50-15.20
15.20-15.50
15.50-16.20
16.20-16.30
Key-note Presentations in Plenum
Arrival and registration Welcome by Jørgen Staunstrup, IT University Introduction to RFID i Danmark 2015 by Henrik B. Granau, RFID i Danmark
Highlights from RFID Journal Live 2015 in San Diego by Henrik B. Granau Pervasive RFID! by Pankaj Shukla, Director, Global RFID Market Development at Zebra Over the last decade, RFID has established itself as a technology of immense value because of its high accuracy, speed of use and ability to solve variety of use cases in multiple verticals.In this presentation, we will take a closer look at why RFID has so much appeal, the current trends in various industries and RFID technology itself; RFID’s use cases and benefits and lessons it has offered on this journey from a gee-whiz technology to a matured operational technology. The RAIN Alliance and why Google was a co-founder by Dr. Frank Honore, System Architect at Google [x], Life Sciences The RAIN Alliance was founded in 2014 to promote, educate and increase awareness of UHF RFID to businesses and consumers worldwide. AIM Global, Impinj and Smarttrac were not very surprising as organizations behind the initiative but on the list were as well Intel and Google (!)For the first time the RAIN Alliance will be properly introduced to Scan-dinavian companies and organizations and with the help from AIM Denmark we are proud to present to you both the RAIN Alliance – and why your organizations should consider joining the alliance – and Google’s own explanation on why they was a co-founder on the initiative.
Introduction to IT University projects with iBeacons
Coffee and Exhibition
Presentations and Workshops in parallel (see page 6-9)
Lunch and Exhibition
Presentations and Workshops in parallel (see page 6-9)
Coffee and Exhibition
Moods of Norway Increases Sales via RFID by Hans Petter Hübert, Supply Chain ManagerMoods of Norway has equipped 13 of its stores with RFID technology to better manage its inventory. This deployment follows a six-month pilot that boosted sales of men’s shirts and suits by double digits. During the pilot (which consisted of tagging men’s shirts and suits, and using a handheld reader to conduct inventory counts on the sales floor), the system not only provided 98 to 99 percent inventory accuracy, but also reduced the amount of labour employees spent perfor-ming manual inventory checks, thereby enabling more frequent checks.
What is next? by Awareness Track physical behavior and use Intelligent On-Site Marketing on “Point of Interest” by combining Apps, Wifi, Beacons and mCRM
Wrap-up and Closing Remarks by Henrik B. Granau, RFID i Danmark
The agenda is subject to alterations.
Plenum in Auditorium 1
-
150507_DENMARK_A5-Adv.V11.pdf 1 07-05-15 12:19
-
11.30-11.50
11.55-12.15
12.20-12.40
12.40-13.40
13.40-14.00
14.05-14.25
14.30-14.50
Presentations in Auditorium 1 - 11.30-14.50
While Workshops are conducted in parallel in separate rooms,the following presentations are presented in Auditorium 1. Efficiency increase by RFID in tool-making and tool-management by Yilmaz Benzer, Sales Manager Neosid Pemetzrieder GmbH & Co.KG In tool-making and tool-management it is required to identify each individual component whenever a tool is moved, installed or maintained. Identification is usually enabled by code engraved or printed on a surface or by an attached ID plate. This kind of identification, as well as paper instructions, is prone to mechanical defects and mistakes due to its manual read-out. A RFID system provides a machine-readable identification of tools and components. With all tool data and instructions stored centrally and interaction with ERP software, the system enhances efficiency and reduces mistakes by relieving workers. It enables automatic documentation and represents the basis for an automated tool- production and –management. Real Time Lorry Inventory on the Road by Geir Vevle, HRAFN - proof of delivery- proof automatic goods receival- proof of pickup
New Danish RFID case in manufacturing – Hilding Anders by Michael Holm Pedersen, Production Manager at Hilding Anders Denmark In the continuous improvement of automation and introduction of a new MES solution in Denmark, Hilding Anders realized that an advanced RFID platform was necessary to feed machines and IT-systems with live data. RFID improves the flexibility of the production, automates processes, reduces the risk for potential errors and delivers live data to the management about production flow. Lunch and Exhibition
Welcome to the 21st century’s cellar – The ultimate wine partner by Mathieu Nidegger,
Co-Founder of La Cave VivanteLa Cave Vivante offers a comprehensive and innovative approach to wine cellar management for both private and professional users. Our objective is to offer an automated just-in-time cellar management system that minimizes the financial investment of the user while simplifying the management of his cellar. To do this, we have developed a mobile application synchronized with an RFID recognition system installed inside the cellar of our customers. The system auto-matically monitors every entry or exit. No need to keep a wine cellar book, the stock is automatically updated.
Garment management at the Hospital by Lasse Cederquist, 2trace – Hygiene quality and powerful management tools
RFID projects in Italy by Luca Nardini, CAEN RFID Sales ManagerCAEN RFID is the leading manufacturer of UHF RFID devices in Italy since 2002. Many End Users around the world are using CAEN RFID technology for different applications like Fashion & Retail, Waste Management, Access Control, Logi- stics and Industrial Manufacturing. Hence, CAEN RFID have a good solid position to present the Italian UHF RFID scenario providing an overview of interesting and huge installations developed by its customers.
The agenda is subject to alterations.
-
Hvilke sporbarhedsteknologier er bedst egnet til hvilke
formål på et hospital? Hvilke standarder er de rigtige,
at basere sine installationer på? Findes der dokumen-
terede business cases, eller er RFID bare ’hype’? Hvor er
der eksempler på at RFID-teknologien rulles ud, efter
at være blevet afprøvet ?
Teknologier, der kan anvendes til sporing, identifika-
tion og opsamling af data er særdeles interessante for de
danske hospitaler. De massive investeringer i nyt hos-
pitalsbyggeri i Danmark har for alvor bragt RFID i fokus,
som en teknologi, der potentielt kan anvendes til at skabe
overblik og bidrage til de løbende effektiviseringskrav på
hospitalerne. Da vi står over for noget der er meget vigtigt
og som bliver stort for healthcare området i årene frem-
over er der dog fortsat mange uafklarede spørgsmål i
forhold til løsningerne og deres implementering.
’RFID’ dækker over mange forskellige teknologier, som er
baseret på forskellige internationale standarder, forskellige
frekvenser, og er af forskellig konkret udformning (med/
uden batterier osv.) Det er med andre ord let at tabe over-
blikket over de mange muligheder og kravene forbundet
med dem, og det medfører et behov for erfaringsudveks-
ling og vidensdeling på området –det vil vi skabe her!
Workshoppen er opdelt i to sessioner;
Del 1:
Hvor langt er man kommet i implementeringen af “it
understøttelse af Lokalisering og emneidentifikation” på
Det Ny Universitets Hospital i Århus, Region Midtjylland
– Gevinster, udfordringer og opdagelser indtil nu.
V/ Henrik Stilling it-arkitekt, Region Midtjylland (eller
Lead Architect – Service Logistik)Status rapportering om
gennemførte aktiviteter og erfaringer fra processen ved
Leverandør teamet bag DNU emnesporbarhed og
identifikation på DNU
V/ Keld Ole Nielsen Lyngsoe systems og Thomas
Toftkjær Systematic
Del 2:
Reference arkitektur for lokalisering og emneidentifika-
tion i sundhedsvæsenet.
Regionerne har i fællesskab udarbejdet en refer-
encearkitektur, et fælles grundlag for lokalisering og
emneidentifikation både internt i og på tværs af regioner.
Referencearkitekturen konsoliderer brugen af en række
globale standarder bl.a. fra GS1. Hvordan anvendes refe-
rencearkitekturen og hvad betyder globale standarder for
fremtidens sundhedsvæsen.
V/ Henrik Stilling it-arkitekt, Region Midtjylland (eller
Lead Architect – Service Logistik, Region Midtjylland)
Reference arkitektur for automatisering
Information om denne og mulighederne den giver
sygehusvæsenet i årene fremover
V/ Jesper Kervin Franke, GS1 Denmark
Vi håber at anden del bliver meget interaktiv og at vi vil
have deltagere fra alle regioner og andre relevante orga-
nisationer og styrelser – og at de vil blande sig i debatten.
Workshoppen arrangeres af AIM Denmark, GS1 Denmark
og RFID i Danmark.
HealthCare Workshop
HealthCare Workshop 11.30-14.50 (in Danish)
-
iBeacons giver helt nye muligheder for stedbestemt
kommunikation på smartphones og til lokalisering
af genstande. Teknologien benyttes i dag primært til
mobil markedsføring i detailhandlen, men udbredes
hurtigt til nye områder, fx formidling på museer,
vejvisning i bygninger og optimering af service.
iBeacons kan købes direkte hos producenterne, men til-
bydes også i stigende grad som en del af cloud-baserede
IT-platforme.
iBeacons er en afgrænset anvendelse af Bluetooth Low
Energi (BLE) standarden. BLE har mere at byde på end
blot en lokaliseringsteknologi. BLE kan kobles med sen-
sorer, fx temperatur-sensorer, så min/max temperaturen
under en forsendelse kan aflæses fra en standard mobil-
telefon.
Denne workshop giver dig indsigt i teknologien bag og
muligheder med iBeacon og viser eksempler på konkrete
løsninger og anvendelsesmuligheder.
Arrangør: Innovationsnetværket InfinIT og Alexandra
Instituttet A/S
Introduktion til iBeacon
iBeacons og hvordan de placere sig i forhold til andre
lokaliseringssteknoloiger
v/Tejs Scharling, InfinIT, Alexandra Instituttet
Brugsmuligheder og hvordan du kommer igang med
iBeacons
v/ Martin Wickings, HeyBuy
Retningsbestemt Beacon, udviklet af RTX
v/ RTX A/S
Andre anvendelser og perspektiver for brugen af iBea-
cons og dynamic Bluetooth beacons
v/Tejs Scharling, InfinIT, Alexandra Instituttet
Diskussion, erfaringsudveksling og afrunding.
• Netværk og flere aktiviteter.
Ret til ændringer I agendaen forbeholdes
iBeacons - det nye sort?
iBeacons Workshop 13.40-14.50 (in Danish)
-
Hvem er GS1 Denmark?GS1 er en global not-for-profit organisation, som udvikler standarder, der effektiviserer forsyningskæder. GS1 Standarderne giver unik produktidentifikation, automatiseret datafangst (stregkoder/RFID) og datadeling. Benefits inkluderer gennemsigtighed i forsyningskæden, bedre sporbarhed og høj datakvalitet.
Udvikling skal baseres på standarder GS1 Standarder er et fælles sprog for unik identifikation, automatiseret datafangst - fx via RFID - og datadeling. Det fælles sprog skal til for at understøtte alle anvendelser af RFID fra Business-to-Business til Business-to-Consumer.
GS1s standard for RFID hedder Electronic Product Code (EPC). EPC er en unik produktidentifikation, der indkodes i en RFID-tag, og er baseret på de allerede eksisterende identifikationsnøgler som fx GTIN, GLN og SSCC.
Hvad kan vi hjælpe jer med? Kontakt os på telefon 39 27 85 27 eller [email protected] eller besøgwww.gs1.dk
-
InfinIT Innovation network for IT
InfinIT is a Danish network for innovative utiliza-
tion of IT. Our goal is to convert the infinite pos-
sibilities that IT offers into concrete collaborations
between research and industry.
InfinIT invites researchers and enterprises wor-
king with process or product innovation with IT
to participate in collaboration projects and the
exchange of knowledge, thus creating a forum
where we can work together to generate exactly
the knowledge that Danish industry and society
needs.
InfinIT are continually involved in cooperations
with various domains e.g. Smart City, Lifestyle,
Internet of Things, Intelligent Buildings,
Wearables, Intelligent Transport Systems etc.
The tracking & positioning interest group
One of InfinIT’s eight interest groups focus on
developing new services based upon tracking- &
positioning technologies. This group is co-organ-
izer off The RFID i Danmark 2015 Conference.
The membership af InfinIT and the tracking &
positioning interest group is free.
Contact: Tejs Scharling, Lab Manager,
Web: www.infinit.dk
The Alexandra Institute The Alexandra Institute helps public and private
organisations develop innovative, IT-based products
and services based on cutting-edge IT research.
We are a non-profit company with a mission to
create value, growth and welfare in society.
Our team of specialists design novel, innovative
IT-based products and services. We apply our skills
in software, user involvement and innovation
methods to create technological solutions of
commercial relevance with the aim of helping
companies boost their business.
· We help you identify how IT can develop and
support your organisation and business
· We provide knowledge about the latest trends
within our areas of expertise
· We develop and optimise software
· We perform reviews of software and architecture
· We provide effectiveness evaluations, benefits
realisation analyses and best practice guidance
The Alexandra Institute also bring this knowledge
into play in our consultancy services and our
innovation networks. In this way, we contributes to
improving the innovation processes in organisa-
tions and to enhancing their competitive position.
Web: www.alexandra.dk
Contact: Ole Lehrmann Madsen, CEO, ole.l.madsen@
alexandra.dk
AIM Denmark Industry association for suppliers of automatic identi-
fication and data mobility
AIM Denmark works to promote the future markets
and technologies for automatic identification and data
mobility to benefit the members of the association.
AIM Denmark is a non-profit organisation and is a
part of the international AIM Global network.
THE PURPOSE OF AIM DENMARK IS
- To be the natural community for suppliers of
solutions and products using automatic identifi-
cation and data mobility.
- To increase usages of automatic identification and
data mobility.
- To give potential users of the technology the reas
surance of the suppliers being a parts of a global
professional ethical trade community.
- To be the common voice of the industry and by that
influence the political scene.
- To be the natural contact for the media regarding
automatic identification and data mobility.
Web: www.aimdenmark.dk
Contact: [email protected]
-
RFID i Danmark focus on strengthening the opportunities
for exchanging experiences – especially between compa-
nies, who has practical experience in the shared fields of
interest. It could be logistics, traceability, production, retail,
health care etc.
Community building today can happen effectively even
though all activity happens on the internet. A great supple-
ment to this is still meeting in person, seminars, company
visits etc. At RFID i Danmark we work with a combination of
virtual and physical networking.
As a member of RFID i Danmark you get access to webinars
and other information for only kr. 300 per year.
If you want to be a member of the more extensive network-
ing activities there are the following options
· For companies with more than 9 employees the annual
fee is kr. 6.400 ex. VAT and includes that 2 persons from
the company can participate in the networking meetings.
· For companies with less than 10 employees the annual
fee is kr. 3.200 ex. VAT and includes that 1 person from the
company can participate in the networking meetings.
· For private persons wanting to participate in networking
meetings the annual fee is kr. 1.800 ex. VAT.
Your challenges as starting point at
the networking meetings
The members chooses the agenda themselves, hence the
debate is always based on your current challenges. Ex-
change of experience is the keyword.
The RFID i Danmark secretariat has an extensive experi-
ence regarding RFID applications and the technologies put
knowledge and international relations at the disposal of the
group.
Gain:
· Presentation on every meeting from RFID i Danmark
about development and experiences – national and inter
national.
· A confidential forum for discussions and exchange of
knowledge.
· A possibility to present your own projects and get feed
back from the rest of the group.
· 2-3 meeting pr. year a 3 hours (mostly 13-16) visiting
members of the group.
· Networking dinner associated with the yearly RFID i Dan
mark conference.
RFID i Danmark will take care of the practical matter. So all
you have to do is concentrate on your outcome.
Join RFID i Danmark by doing one of the following
Send an e-mail to [email protected] with your name, com-
pany, e-mail, address, phone number and which of the four
options above you want. Then we will contact you.
Or visit our website at www.rfididk.org/363-2/ and register
by filling out the form. Then we will contact you.
If you have any other questions don’t hesitate to contact
Henrik Granau at 21 823 835 or visit us at our exhibition
stand at the conference.
RFID i Danmark
Join RFID i Danmark as a member
-
FEIG ELECTRONIC GmbH · Lange Straße 4 · D-35781 Weilburg Phone.: +49 6471 3109-0 · Fax: -99 · E-mail: [email protected] · www.feig.de
OBID® – RFID by FEIG ELECTRONIC
OBID i-scan®
OBID i-scan® Blade Handheld ReaderWireless HF handheld reader for inventory processes in libraries, laundries and logistical applications.
ID ISC.PRH200 offers
t Powerful “Boost Mode” up to 4W
t Seamless work integration
t Long operating times (up to 16h)
t Integrated antenna & WLAN module
ID ISC.PRH200
3448_AZ_iscan_PRH200_173x247_en_RZ_th.indd 1 13.05.14 14:19
-
Organizers:
Main sponsor:
Platin sponsor:
Denmark
Granau IT
Denmark
Premium sponsor:
Sponsors:
Exhibitors:
Denmark
Granau IT
Denmark
Denmark
Granau IT
Denmark
secure open
�IT-Universitetet