rico systemcatalogue 2009 english · cable ladders standard cable ladders 60 mm side height,...
TRANSCRIPT
Cable ladders60
Cable ladders
Cable ladders
Standard cable ladders60 mm side height, standard support spacing 1.5 m 55100 mm side height, standard support spacing bis 3.0 m 63
Cable ladders 61
This chapter contains an overview of the RICO cable ladder systems for various loads and applications, subdivided into product families.
see system pictures 7 and 8 Table of contents Page
Cab
le la
dd
ers
Cable ladders
62 Cable ladders
Standard cable ladders - System 60
Content
63
Table of contents Page
RICO-Cable ladders for laying cables and lines, especially power lines for various loads.
The RICO standard cable ladder systems with 60 mm side heightfor a standard support spacing of 1.5 m include:
see system pictures
Cab
le la
dd
ers
Cable ladders
Cable ladders
light-duty design: 151C1-...-L63 / 161C1-...-L63 64
heavy-duty design: 151C1-...-S63 / 161C1-...-S63 64
Molded components for cable ladders
bend: 151C2-...-A / 161C2-...-A 65
extension tee: 151C15-... / 161C15-... 65
crossing 151C20-... / 161C20-... 66
exit plate: 16C8-...-B 66
Jointing pieces for cable ladders
straight joint, bendable joint and hinge piece: 151E11-... / 161E11-... 67
screw: 16J6-P 67
hold down clamp: 16J6-A 67
Accessory for cable ladders
divider strip: 150C13-A / 160C13-A 68
Support corner: 16U6-A 68
Flat corner: 16C7-400-A 68
screw: 16C8-Z 68
Covers
covers for ladders, without or with locking: 15W12-... / 16W12-... 69
covers for molded components: 15C12-...-A / 16C12-...-A, 15C12-...-AR / 16C12-...-AR,15C12-...-T / 16C12-...-T, 15C12-...-TR / 16C12-...-TR
70
Accessory for covers
locking device 16N12-V 69
fixing clip 171W12-K 69
Standard cable ladders - System 60Cable ladder
cable ladder 151C1-...-L63 / 161C1-...-L63 with thickness 1.5 mm cable ladder 151C1-...-S63 / 161C1-...-S63 with thickness 2.0 mmMaterial -
- sheet steel, sides perforated continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Supply length - -
6000 mm, 3000 mm deliverable upon requestcable ladders are delivered folded to reduce transport volume
Technical data - - -
side height 60 mm, thickness 1.5 mm or 2.0 mmstandard support spacing 1.5 mrungs of C-profiles 25x10 mm perforated are rivited with 11 mm slots open to topside
Field of application - installation on brackets and consoles
Ordering information
Fixing details
Use hold down clamp 16J6-A when fixing on brackets.
Use bend 151C2-... / 161C2-... to produce curves.
Use extension tee 151C15-... / 161C15-... to produce junctions.
Use jointing pieces 151E11-... /161E11-... to connect trays.
Fixing material Page
hold down clamp 16J6-A 67
Width(mm)
Order No. cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.) cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight Order No. Weight Order No. Weight
200 151C1-200-L63 15.00 161C1-200-L63 15.75 151C1-200-S63 18.19 161C1-200-S63 21.00
300 151C1-300-L63 15.60 161C1-300-L63 16.38 151C1-300-S63 19.73 161C1-300-S63 21.90
400 151C1-400-L63 16.50 161C1-400-L63 17.33 151C1-400-S63 20.55 161C1-400-S63 22.90
500 151C1-500-L63 19.20 161C1-500-L63 20.16 151C1-500-S63 23.14 161C1-500-S63 25.90
600 151C1-600-L63 20.40 161C1-600-L63 21.42 151C1-600-S63 24.31 161C1-600-S63 27.30
Load diagram
Cable ladders64
1C1-...L63
1C1-...S63
protective end cap for rung 15J8-S25 194
Standard cable ladders - System 60Molded components for cable ladders
bend 151C2-...-A / 161C2-...-A, extension tee 151C15-... / 161C15-...
Material - -
sheet steel , sides perforated continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Technical data - -
side height 60 mm suitable for all ladder widths from 200 mm to 600 mm
Field of application - -
bend for making horizontal 90° curves extension tees for making 90° junctions, crossing made with 2 extension tees
Ordering information
Fixing details
bend
Connect sides of bend and ladder with straight joint 151E11-A / 161E11-A and screw 16J6-P.
extension tee
Cut out ladder side (width of extension tee+ 1280 mm).
Bore out the rung's rivets andseperated with chisel.
Insert extension tee.
Connect sides of extension tee and ladder with straight joint 151E11-A /161E11-A and screws 16J6-P.
Fasten loose ladder rungs to extensiontee support side with fixing screws 16J6-H-V.
Fixing material Page
screw 16J6-P 67
bend
Width(mm)
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
200 151C2-200-A 3.60 161C2-200-A 3.78
300 151C2-300-A 4.00 161C2-300-A 4.20
400 151C2-400-A 4.40 161C2-400-A 4.62
500 151C2-500-A 5.30 161C2-500-A 5.57
600 151C2-600-A 5.70 161C2-600-A 5.99
extension tee
Width(mm)
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
200 151C15-200 5.39 161C15-200 5.57
300 151C15-300 5.64 161C15-300 5.82
400 151C15-400 6.01 161C15-400 6.27
500 151C15-500 6.39 161C15-500 6.72
600 151C15-600 6.79 161C15-600 7.02
including 8 screws 15J6-H-V
Cable ladders 65
Cab
le la
dd
ers
1C2-...-A
1C15-...
Standard cable ladders - System 60Molded components for cable ladders
crossing 151C20-... / 161C20-..., exit plate 16C8-...-B
Material - -
sheet steel continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Technical data - suitable for all ladder widths from 200 mm to 600 mm
Field of application - -
crossing for making horizontal 90° curves exit plate for cable protection in vertical cable bends
Ordering information
Fixing details
crossing
Connect sides of crossing and ladders with straight joint 151E11-A / 161E11-A and screw 16J6-P.
crossing
Widths(mm)
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
200 151C20-200 6.80 161C20-200 7.14
300 151C20-300 7.50 161C20-300 7.88
400 151C20-400 8.30 161C20-400 8.72
500 151C20-500 9.80 161C20-500 10.29
600 151C20-600 11.00 161C20-600 11.55
exit plate
Width(mm)
Order No.hot dip galv. (kg/pce.)
Weight
190 16C8-200-B 0.51
290 16C8-300-B 0.82
390 16C8-400-B 1.06
490 16C8-500-B 1.41
590 16C8-600-B 1.72
including 2 fixing screws
Fixing material Page
screw 16J6-P 67
Cable ladders66
1C20-...
C8-...-B
Standard cable ladders - System 60Jointing pieces for cable ladders
jointing piece 151E11-... / 161E11-..., screw 16E1-Z, hold down clamp 16J6-A
Material - -
sheet steel continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Technical data - - -
side height H = 60 mm suitable for all ladder widths from 200 mm to 600 mm delivery including fixing screws
Field of application - to make straight, angular, upward or downward conncection of cable ladders
Ordering information
Fixing details
Mount jointing piece to or push it into ladder ends.
Fasten jointing piece and ladder side with 2 screws 16J6-P.
straight joint
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
151E11-A 0.14 161E11-A 0.15
including 2 screws 16J6-P (M8x16)
bendable joint
Order No..cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
151E11-B 0.14 161E11-B 0.15
including 4 screws 16J6-P (M8x16)
hinge piece
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Orer No. Weight
151E11-C 0.24 161E11-C 0.25
including 2 screws 16J6-P (M8x16)
accessories
Order No.hot dip galv. (kg/pce.)
Weight
Screw 16J6-P 0.02
Hold down clamp 16J6-A 0.02
Cable ladders 67
Cab
le la
dd
ers
1E11-...
Standard cable ladders - System 60Accessories for cable ladders
divider strip 150C13-A / 160C13-A, support corner 16U6-A, flat corner 16C7-400-A, fixing screws 16C8-Z
Material - -
sheet steel continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Technical data - suitable for all ladder widths from 200 mm to 600 mm
Field of application - - -
divider strip for dividing cable ladders for different kinds of cable, e.g. high voltage and low voltage current support corner for fixing ladders to brackets for changes in vertical directionflat corner for later addition of exits without sawing
Ordering information
divider strip
Length(mm)
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
3000 150C13-A 1.15 160C13-A 1.16
including fixing clips for divider strip 16C13-M
support corner
Order No.hot dip galv. (kg/pce.)
Weight
16U6-A 0.12
including 1 screw 16J6-S (M8x20)
flat corner
Radius(mm)
Order No.hot dip galv. (kg/pce.)
Weight
400 16C7-400-A 0.90
fixing screwM6x20
Order No.hot dip galv. (kg/pce.)
Weight
16C8-Z 0.015
5 5
302850
LL8,5x30
7x37
R
30
including 4 screws 16C8-Z
Cable ladders68
0C13-A
U6-A
C7-400-A
Standard cable ladders - System 60 Covers for cable ladders
cover 15W12-... / 16W12-... for cable ladders, locking device 16N12-V, fixing clip 171W12-K
Material - -
sheet steel continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Supply length - 3000 mm
Technical data - - -
for cable ladders for all ladder widths from 200 mm to 600 mmavailable with or without locking
Field of application - cable protection
Ordering information
Fixing details
Fix covers with fixing clips 171W12-K.
cover without locking
Width(mm)
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
200 15W12-200 5.25 16W12-200 5.51
300 15W12-300 7.70 16W12-300 8.09
400 15W12-400 10.10 16W12-400 10.61
500 15W12-500 12.50 16W12-500 13.13
600 15W12-600 14.90 16W12-600 15.65
cover with locking for cable ladder
Width(mm)
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
200 15W12-200-R 5.31 16W12-200-R 5.58
300 15W12-300-R 7.78 16W12-300-R 8.17
400 15W12-400-R 10.18 16W12-400-R 10.69
500 15W12-500-R 12.60 16W12-500-R 13.23
600 15W12-600-R 15.00 16W12-600-R 15.75
pre-mounted locking device 16N12-V
locking device
Bestell-Nr. hot dip galv. (kg/pce.)
Gewicht
16N12-V 0.02
58
fixing clip
Order No.stainless steel (kg/pce.)
Weight
171W12-K 0.02
13
13
3000
3000
B
B
1375
Cable ladders 69
Cab
le la
dd
ers
W12-...
N12-V
1W12-K
Standard cable ladders - System 60Covers for molded components
cover 15C12-...-A / 16C12-...-A, 15C12-...-AR / 16C12-...-AR for bend, cover 15C12-...-T / 16C12-...-T, 15C12-...-TR / 16C12-...-TR for extension tee
Material --
-
sheet steelcontinuously hot galvanized according to DIN EN 10327 or hot dip galvanized DIN EN ISO 1461 fixing clip made of stainless steel
Technical data - for all ladder widths of 200 mm to 600 mm
Field of application - protection of the cables
Ordering information
Fixing details
Fix covers with locking devices16N12-V or with fixing clips171W12-K .
Fixing material page
fixing clip 171W12-K 69
locking device 16N12-V 69
cover for bend
without locking with locking (pre-perforated)
Width (mm)
Order No.cont. hot galv.
Weight (kg/pce.)
Order No. hot dip galv.
Weight (kg/pce.)
Order No. cont. hot galv.
Weight (kg/pce.)
Order No. hot dip galv.
Weight (kg/pce.)
200 15C12-200-A 2.10 16C12-200-A 3.39 15C12-200-AR 2.14 16C12-200-AR 3.43
300 15C12-300-A 3.27 16C12-300-A 5.26 15C12-300-AR 3.31 16C12-300-AR 5.30
400 15C12-400-A 4.55 16C12-400-A 7.30 15C12-400-AR 4.59 16C12-400-AR 7.34
500 15C12-500-A 6.02 16C12-500-A 9.55 15C12-500-AR 6.06 16C12-500-AR 9.59
600 15C12-600-A 7.50 16C12-600-A 12.00 15C12-600-AR 7.54 16C12-600-AR 12.04
incl. 4 locking devices 16N12-V (locking devices are only enclosed)
cover for extension tee
without locking with locking (pre-perforated)
Width (mm)
Order No.cont. hot galv.
Weight (kg/pce.)
Order No.hot dip galv.
Weight (kg/pce.)
Order No. cont. hot galv.
Weight (kg/pce.)
Order No. hot dip galv.
Weight (kg/pce.)
200 15C12-200-T 2.72 16C12-200-T 4.42 15C12-200-TR 2.76 16C12-200-TR 4.46
300 15C12-300-T 3.27 16C12-300-T 5.30 15C12-300-TR 3.31 16C12-300-TR 5.34
400 15C12-400-T 3.82 16C12-400-T 6.19 15C12-400-TR 3.86 16C12-400-TR 6.23
500 15C12-500-T 4.37 16C12-500-T 7.07 15C12-500-TR 4.41 16C12-500-TR 7.11
600 15C12-600-T 4.92 16C12-600-T 7.96 15C12-600-TR 4.96 16C12-600-TR 8.00
incl. 4 locking devices 16N12-V (locking devices are only enclosed)
Cable ladders70
C12-...
notes / additions
Cable ladders 71
Cab
le la
dd
ers
Cable ladders
72 Cable ladders
Standard cable ladders - System 100
Content
73
RICO-Cable ladders for laying cables and lines, especially power lines for various loads.
The RICO-standard cable ladder system with 100 mm side heightfor support spacing of up to 3.0 m includes:
see system pictures 8Table of contents Seite
Kab
elp
rits
chen
Cable ladder
Cable ladders
low weight design: 153C1-...-L63 / 163C1-...-L63 74
Molded components for cable ladders
bend: 153C2-...-A / 163C2-...-A 75
extension tee: 153C15-... / 163C15-... 75
crossing 153C20-... / 163C20-... 76
exit plate: 16C8-...-B 76
Jointing pieces for cable ladders
straight joint, bendable joint and hinge piece: 153E11-... / 163E11-... 77
screw: 16J6-P 77
hold down clamp: 16J6-A 77
Accessories for cable ladders
divider strip: 152C13-A / 162C13-A 78
support corner: 16U6-A 78
flat corner: 16C7-400-A 78
screw: 16C8-Z 78
Covers
cover for ladders, without or with locking: 15W12-... / 16W12-... 79
cover for molded components: 15C12-...-A / 16C12-...-A, 15C12-...-AR / 16C12-...-AR,15C12-...-T / 16C12-...-T, 15C12-...-TR / 16C12-...-TR
80
Accessory for covers
locking device 16N12-V 79
fixing clip 173W12-K 79
Standard cable ladders - System 100Cable ladder
cable ladder 153C1-...-L63 / 163C1-...-L63
Material - -
sheet steel, sides continuously perforated continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Supply length - -
6000 mm, 3000 mm upon request to be deliveredcable ladders are delivered folded to reduce transport volume
Technical data - - -
side hieght 100 mm, thickness 1.5 mmsupport spacing max. 3.0 mrungs of C-Profil 25x10 perforated are riveted with 11 mm slots open to topside.
Field of application - installation on brackets
Ordering information
Fixing details
Use hold down clamp 16J6-A when fixing to brackets.
Use bend 15C2-...-LA / 163C2-...-LA to produce curves.
Use extension tees 153C15-...-L / 163C15-...-L to produce junctions.
Use jointing piece 153E11-... / 163E11-... to connect ladders.
Fixing details Page
hold down clamp 16J6-A 77
Width(mm)
Order No.cont. hot galv. (kg/pce.)
Weight Order No.hot dip galv. (kg/pce.)
Weight
200 153C1-200-L63 20.46 163C1-200-L63 21.96
300 153C1-300-L63 21.30 163C1-300-L63 22.86
400 153C1-400-L63 22.08 163C1-400-L63 23.76
500 153C1-500-L63 24.66 163C1-500-L63 26.58
600 153C1-600-L63 25.86 163C1-600-L63 27.78
Load diagram
3C1-...-L60
Cable ladders74
� � ��
��� ��� ���
Support spacing [m]
Side deflection [mm]under max. cable load
Max. cable capacity
���
���
���
���Load [kN
/m]
������
����
153C1-...-L63
protec. end cap for rung 15J8-S25 194
Standard cable ladders - System 100Molded components for cable ladders
bend 153C2-...-LA / 163C2-...-LA, extension tee 153C15-...-L / 163C15-...-L
Material - -
sheet steel, sides continuousky perforated continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Technical data - -
side height 100 mm suitable for all tray widths from 200 mm to 600 mm
Field of application - -
bend for making horizontal 90° curves extension tees for making 90° junctions
Ordering information
Fixing details
bend
Connect sides of bend and ladder with straight joint 153E11-A / 163E11-A and screws 16J6-P.
extension tee
Cut out ladder side (extension tee width + 1280 mm).
Bore out the rung's rivets and seperate with chisel.
Insert extension tee.
Connect sides of extension tee and ladder with straight joint 153E11-A / 163E11-A and screws 16J6-P.
Fasten loose ladder rungs to extensiontee support side with fixing screws16J6-H-V.
Fixing material Page
screw 16J6-P 77
bend
Width(mm)
Order No.cont. hot galv. (kg/pce.)
Weight Order No.hot dip galv. (kg/pce.)
Weight
200 153C2-200-LA 4.30 163C2-200-LA 4.52
300 153C2-300-LA 4.75 163C2-300-LA 4.99
400 153C2-400-LA 5.20 163C2-400-LA 5.46
500 153C2-500-LA 6.15 163C2-500-LA 6.46
600 153C2-600-LA 6.60 163C2-600-LA 6.93
extension tee
Width(mm)
Order No.cont. hot galv. (kg/pce.)
Weight Order No.hot dip galv. (kg/pce.)
Weight
200 153C15-200-L 5.78 163C15-200-L 6.07
300 153C15-300-L 6.02 163C15-300-L 6.32
400 153C15-400-L 6.26 163C15-400-L 6.57
500 153C15-500-L 6.88 163C15-500-L 7.22
600 153C15-600-L 7.16 163C15-600-L 7.52
3C2-...-LA
3C15-...-L
including 8 screws 15J6-H-V
Cable ladders 75
Cab
le la
dd
ers
Standard cable ladders - System 100Molded components for cable ladder
crossing 153C20-... / 163C20-..., exit plate 16C8-...-B
Material - -
sheet steel continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Technical data - suitable for all ladder widths from 200 mm to 600 mm
Field of application - -
crossing for making horizontal 90° curves exit plate for cable protection in vertical cable bends
Ordering information
Fixing details
Crossing
Connect sides of crossing and ladder with straight joint 151E11-A / 161E11-A and screws 16J6-P.
crossing
Width(mm) cont. hot galv. (kg/kit) hot dip galv. (kg/kit)
Order No. Weight Order No. Weight
200 153C20-200 8.80 163C20-200 9.24
300 153C20-300 9.60 163C20-300 10.08
400 153C20-400 10.45 163C20-400 10.97
500 153C20-500 12.00 163C20-500 12.60
600 153C20-600 13.25 163C20-600 13.91
exit plate
Width(mm)
Order No. hot dip galv. (kg/pce.)
Weight
190 16C8-200-B 0.51
290 16C8-300-B 0.82
390 16C8-400-B 1.06
490 16C8-500-B 1.41
490 16C8-600-B 1.72
Fixing material Page
screw 16J6-P 77
C20-...
C8-...-B
Cable ladders76
Standard cable ladders - System 100 Jointing piece for cable ladders
jointing piece 153E11-... / 163E11-..., accessories
Material - -
sheet steel continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Technical data - - -
side height H = 100 mm suitable for all ladder widths from 200 mm to 600 mm delivery including fixing screws
Field of application - making straight, angular, upward or downward connection of cable ladders
Ordering information
Fixing details
Mount jointing piece to or push itinto ladder ends.
Fasten jointign piece and laddersides with 2 screws 16J6-P.
straight joint
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
153E11-A 0.33 163E11-A 0.35
including 2 screws 16J6-P (M8x16)
bendable joint
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
153E11-B 0.31 163E11-B 0.33
including 4 screws 16J6-P (M8x16)
hinge piece
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
153E11-C 0.76 163E11-C 0.80
including 2 screws 16J6-P (M8x16)
accessories
Order No. hot dip galv. (kg/pce.)
Weight
Screw 16J6-P 0.02
Hold down clamp 16J6-A 0.02
3E11-...
Cable ladders 77
Cab
le la
dd
ers
Standard cable ladders - System 100Accessories for cable ladders
divider strip 152C13-A / 162C13-A, support corner 16U6-A, flat corner 16C7-400-A, fixing screw 16C8-Z
Material - -
sheet steel continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Techniscal data - suitable for all ladder widths from 200 mm to 600 mm
Anwendungsbereich - - -
divider strip for dividing cable ladders for different kinds of cable, e.g. high voltage and low voltage current support corner for fixing ladders to brackets for changes in vertical directionflat corner for later addition of exits without sawing
Ordering information
divider strip
Length(mm)
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
3000 152C13-A 2.75 162C13-A 2.89
including 4 fixing clips 15C13-M / 16C13-M
support corner
Order No.hot dip galv. (kg7pce.)
Weight
16U6-A 0.12
including 1 screw 16J6-S (M8x20)
flat corner
Radius(mm)
Order No. hot dip galv. (kg/pce.)
Weight
400 16C7-400-A 0.90
fixing screwM6x20
Order No.hot dip galv. (kg/pce.)
Weight
16C8-Z 0.015
5 5
302850
LL8,5x30
7x38Lochmittenabstand 100 mm
80
240,90
3000
7x37
R
C13-A
U6-A
C7-400-A
iincluding 4 screws 16C8-Z
Cable ladders78
Cable ladders 79
Cab
le la
dd
ers
Covers for cable ladder
cover 15W12-... / 16W12-... for cable ladders, locking device 16N12-V, fixing clip 173W12-K
Material - -
sheet steel continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Supply length - 3000 mm
Technical data - - -
for light cable ladders and for wide span cable ladders for all ladder widths from 200 mm to 600 mmavailable with or without locking
Field of application - cable protection
Ordering information
Fixing details
Fix covers with fixing clips 173W12-K.
fixing clip
Order No.stainless steel (kg/pce.)
Weight
173W12-K 0.03
98
cover without locking
Width(mm)
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
200 15W12-200 5.25 16W12-200 5.51
300 15W12-300 7.70 16W12-300 8.09
400 15W12-400 10.10 16W12-400 10.61
500 15W12-500 12.50 16W12-500 13.13
600 15W12-600 14.90 16W12-600 15.65
cover with lockinh for cable ladders
Width(mm)
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight
200 15W12-200-R 5.31 16W12-200-R 5.58
300 15W12-300-R 7.78 16W12-300-R 8.17
400 15W12-400-R 10.18 16W12-400-R 10.69
500 15W12-500-R 12.60 16W12-500-R 13.23
600 15W12-600-R 15.00 16W12-600-R 15.75
pre-mounted locking device 16N12-V
locking device
Order No.hot dip galv. (kg/pce.)
Weight
16N12-V 0.02
13
3000B
137513
B3000
W12-...
125
N12-V
3W12-K
Standard cable ladders - System 100Covers for molded components
cover 15C12-...-A / 16C12-...-A, 15C12-...-AR / 16C12-...-AR for bend, cover 15C12-...-T / 16C12-...-T, 15C12-...-TR / 16C12-...-TR for extension tee
Material - -
sheet steel continuously hot galvanized according to DIN EN 10327 or hot dip galvanized according to DIN EN ISO 1461
Technical data - for all ladder width from 200 mm to 600 mm
Field of application - cable protection
Ordering information
Fixing details
Fasten covers with locking devices16N12-V or with fixing clips173W12-K.
Fixing material Page
fixing clip 173W12-K 79
locking device 16N12-V 79
Cover for bend
without locking with locking (pre-perforated)
Width(mm)
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.) cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight Order No. Weight Order No. Weight
200 15C12-200-A 2.10 16C12-200-A 3.39 15C12-200-AR 2.14 16C12-200-AR 3.43
300 15C12-300-A 3.27 16C12-300-A 5.26 15C12-300-AR 3.31 16C12-300-AR 5.30
400 15C12-400-A 4.55 16C12-400-A 7.30 15C12-400-AR 4.59 16C12-400-AR 7.34
500 15C12-500-A 6.02 16C12-500-A 9.55 15C12-500-AR 6.06 16C12-500-AR 9.59
600 15C12-600-A 7.50 16C12-600-A 12.00 15C12-600-AR 7.54 16C12-600-AR 12.04
Cover for extension tee
without locking with locking (pre-perforated)
Width(mm)
Order No.cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.) cont. hot galv. (kg/pce.) hot dip galv. (kg/pce.)
Weight Order No. Weight Order No. Weight Order No. Weight
200 15C12-200-T 2.72 16C12-200-T 4.42 15C12-200-TR 2.76 16C12-200-TR 4.46
300 15C12-300-T 3.27 16C12-300-T 5.30 15C12-300-TR 3.31 16C12-300-TR 5.34
400 15C12-400-T 3.82 16C12-400-T 6.19 15C12-400-TR 3.86 16C12-400-TR 6.23
500 15C12-500-T 4.37 16C12-500-T 7.07 15C12-500-TR 4.41 16C12-500-TR 7.11
600 15C12-600-T 4.92 16C12-600-T 7.96 15C12-600-TR 4.96 16C12-600-TR 8.00
C12-...
Cable ladders80
notes / additions
Cable ladders 81
Cab
le la
dd
er