rig lizard 2021 -...
TRANSCRIPT
TM
Rig Lizard® 2021
7/S6/XS 11/XXL 12/3XL8/M 9/L 10/XLiSEA
CUT: 3
impact protection
Tp-X™Technology
4243
Lira 1027, Santiago, Chile. / Tel:(56 2) 2635 83 23 www.puertoviejosa.cl / [email protected]
• La palma sintética con patrón de tejido único ofrece una comodidad y destreza inigualables
• La palma durable TP-X® utiliza el más alto grado de resistencia a la abrasión al mismo tiempo que mantiene el agarre resistente al aceite
• El exoesqueleto completamente resistente a impactos con guardas contra aplastamiento IR-X® de alto rendimiento proporciona mayor protección contra impactos que el competidor más cercano
protege puntos comunes de pellizcamiento y prensión
• La silleta reforzada del dedo índice y pulgar prolonga la vida útil del guante
• La guarda IR-X® adicional entre los dedos pulgar e índice
• Las costuras externas implementan un hilo hilvanado sobre uno central de doble puntada y agregan mayor durabilidad
• El puño de neopreno SlipFit® con respiración agrega comodidad y conveniencia
• El esquema de colores Hi-Vis incrementa la alerta visual
• Disponible en tallas 6 (XS) a 12 (3XL)
ZONAS DE PROTECCIÓN:ATRIBUTOS:
TALLAS:
CARACTERÍSTICAS:
Resistencia al Corte
Resistencia a Punzaduras
Resistencia a la Abrasión
Resistencia al Impacto
Resistencia a los Aceites
Page 1 of 3
EC TYPE-EXAMINATION CERTIFICATE
(EC Directive 89/686/EEC)
Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC
Certificate No: EC50225 Issue 1 05 April 2012
Certified since 05 April 2012
Issued to: Performance Fabrics Incorporated.
trading as: HEXARMOR.
2000 Oak Industrial Drive NE, Grand Rapids, MI 49505. USA
Authorised by: G Briggs Head of Laboratory
2019
� This Certificate remains the property of West Yorkshire
Materials Testing Service whom it must be returned to on request.
� This certificate is only valid if the seal is stamped.
PO Box 5, Morley, LS27 0QP Nepshaw Lane South, Morley, Leeds Tel 0113 253 0241 Fax 0113 252 7029 Head of Laboratory G. Briggs C. Text ATI
It is certified that the manufacturer’s technical file and the PPE detailed below have been assessed and found to be in accordance with EC Directive 89/686/EEC. PPE Product: Hexarmor Riglizard TM 2021 Mechanic’s Style Glove. – comprised of a 50% PVC, 40% Polyester 10% cotton fabric over a 100% polyester fabric and 60% Nylon,40% Polyurethane, covering the palm side of the glove with the back comprising of a 4 way spandex with thermoplastic rubber moulds, between the fingers is comprised of a synthetic leather, with a neoprene and lycra cuff. The gloves are available in 5 sizes. When examined the PPE satisfied the relevant requirements in the harmonized standards,
EN 388:2003 Performance Level 4, 2, 4, 3. The manufacturer’s information notices detailed within technical file reference 2021 in English have been assessed and found to have addressed all of the relevant requirements of the standards. However the detailed content of the notice is the responsibility of the manufacturer as are translations into other languages.
Page 2 of 3
EC TYPE-EXAMINATION CERTIFICATE
(EC Directive 89/686/EEC)
Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC
Certificate No: EC50225 Issue 1 05 April 2012
Certified since 05 April 2012
Issued to: Performance Fabrics Incorporated.
trading as: HEXARMOR.
2000 Oak Industrial Drive NE, Grand Rapids, MI 49505. USA
Authorised by: G Briggs Head of Laboratory
2019
� This Certificate remains the property of West Yorkshire
Materials Testing Service whom it must be returned to on request.
� This certificate is only valid if the seal is stamped.
PO Box 5, Morley, LS27 0QP Nepshaw Lane South, Morley, Leeds Tel 0113 253 0241 Fax 0113 252 7029 Head of Laboratory G. Briggs C. Text ATI
ALL TEST DOCUMENTS MUST BE INCLUDED IN THE TECHNICA L FILE
Requirement Assessment Technical Documentation
Technical File Technical file in order with PPE Directive (89/686/EEC)
Technical file Ref 2021 (dated 04 April 2012)
EN 420 innocuousness Glove meets all requirements BM Polyco MK11181
EN 420 Ergonomics and sizing
Glove meets all requirements Dexterity Level 4
BM Polyco MK11181 BM Polyco MK11181
EN 388 EN 388 Level 4,2,4,3
BM Polyco MK11181
Product Markings Marking meets the requirements of EN 388:2003, EN420:2003 A1:2009
Detailed in Technical file.
Page 3 of 3
EC TYPE-EXAMINATION CERTIFICATE
(EC Directive 89/686/EEC)
Notified body number: 2019 NOTIFIED UNDER ARTICLE 9 OF EC DIRECTIVE 89/686/EEC
Certificate No: EC50225 Issue 1 05 April 2012
Certified since 05 April 2012
Issued to: Performance Fabrics Incorporated.
trading as: HEXARMOR.
2000 Oak Industrial Drive NE, Grand Rapids, MI 49505. USA
Authorised by: G Briggs Head of Laboratory
2019
� This Certificate remains the property of West Yorkshire
Materials Testing Service whom it must be returned to on request.
� This certificate is only valid if the seal is stamped.
PO Box 5, Morley, LS27 0QP Nepshaw Lane South, Morley, Leeds Tel 0113 253 0241 Fax 0113 252 7029 Head of Laboratory G. Briggs C. Text ATI
Photograph of gloves: