· rigid and precise cnc lathe nlx2500 . the premium machine to ... coolant cooling system...

NLX2500

Rigid and Precise CNC Lathe

NLX2500

www.dmgmori.com

The premium machine to support the next generation

The X-class has evolved from our best-selling N Series, which has sold 28,000 units.

The X-class machines have been designed based on feedback from thousands of customers

on the N Series, and offer high quality, high precision and high reliability.

The X-class machines flexibly meet a variety of needs and are worth the investment.

NLX2500MC/700

BMT:Built-in Motor Turret

Main features

Main features

■ Rapid traverse rate

X-axis 30 m/min (98.4 fpm) Z-axis 30 m/min (98.4 fpm) Y-axis 10 m/min (32.8 fpm) <Y, SY>

■ Travel

NLX2500/700 NLX2500/1250

Turret

X-axis 260 mm (10.2 in.)Z-axis 795 mm (31.3 in.) 1,345 mm (53.0 in.)

Y-axis ±50 mm (±2.0 in.)Spindle 1/Spindle 2 <SMC, SY> C-axis 360°Spindle 2 <SMC, SY> B-axis 734 mm (28.9 in.) 1,284 mm (50.6 in.)

Tailstock<2-axis turning> 650 mm (25.6 in.) ―<MC, Y> 734 mm (28.9 in.) 1,284 mm (50.6 in.)

● Photo: NLX2500MC/700

C-axis

B-axis

Z-axis

Y-axis

X-axis

NLX2500 series machines adopt slideways on all axes for improved

damping characteristics and dynamic rigidity.

■ 2-axis turningConstruction designed for increased basic performance of two-axis lathe

■ MC, YConstruction designed for increased milling performance

Built-in motor spindleBMT (Built-in Motor Turret)

The same holder with that of the NL SeriesX-axis

Z-axis

Digital tailstockHydraulic quill (option)

Belt-driven spindleOil coolerless

Basic structure

Slideways are used for all axes Increased ball screw rigidity

Dedicated platform

For the turning, milling and Y-axis specifications, different platforms have been developed and optimally-designed to suit each model.

Compared with conventional machine

53% UPX-axis 28% UPZ-axis

41% UPY-axis <Y specification>

NLX2500Y/700 NLX2500Y/1250

● Diagram: NLX2500/700

Slideways are used for all axes Increased ball screw rigidity

Dedicated platform


●: Standard features　×: Not applicable

Specifications 2-axis turning＊ MC Y SMC SYSpindle 1/Turret ● ● ● ● ●Turret (Milling) × ● ● ● ●Tailstock ● ● ● × ×Spindle 2 × × × ● ●Y-axis × × ● × ●

＊For 2-axis turning specifications only NLX2500/700

2-axis turning MC SYSpindle 2Tailstock Tailstock

Milling turret Milling turret

Variations

Turret

OptionOP

The built-in motor spindle minimizes vibration, achieving high-precision, high-output machining. <MC, Y, SMC, SY>

The high-rigidity digital

tailstock driven by a servo

motor significantly reduces

setup time.

■ Y-axis travel

±50 mm (±2.0 in.)

The Y-axis is created by linking the feed

of the X-axis and the simulating axes.

We have made the axis unit compact and

restricted the height of the machine.

Max. turning length

Max. turning diameter

Simulating axis

X-axis

Y-axis

Workpiece size

Spindle 1/Spindle 2 <SMC, SY>

Y-axis specifications <Y, SY> Tailstock <2-axis turning, MC, Y>

NLX2500/700 NLX2500/1250

2-axis turning MC, Y, SMC, SY MC, Y, SMC, SY

Max. turning diameter φ460 mm (φ18.1 in.) φ366 mm (φ14.4 in.)

Max. turning length 728 mm (28.6 in.) 705 mm (27.7 in.) 1,255 mm (49.4 in.)

Bar work capacity φ80 mm (φ3.1 in.)

10-inch 12-inch OP

■ Chuck size

Spindle 1

6-inch8-inch OP

Spindle 2 <SMC, SY>

2-axis turning MC, Y, SMC, SY

Spindle 13,500 min-1　2,500 min-1 OP

3,000 min-1 OP 4,000 min-1 OP

4,000 min-1

2,500 min-1 OP 4,000 min-1 OP

Spindle 2 ― 6,000 min-1　5,000 min-1 OP

■ Max. spindle speed

BMT:Built-in Motor Turret



■ Max. rotary tool spindle speed <MC, Y, SMC, SY>

10,000 min-1

■ Number of tool stations

■ Turret indexing time (1-station)

■ Tool tip rigidity


2-axis turning


MC

The turret with an optimum center of gravity location offers significantly improved tool tip rigidity.

0.27 sec.

27％UP

2-axis turning MC, Y, SMC, SY

0.34 sec.

22％UP

● Depending on the number and arrangement of tools, the turret indexing time may be longer.

Original technology

Main features

Main features

“Mature” and “Evolved” BMT Technology “Mature” and “Evolved” BMT Technology

● Improved milling power ● Improved milling accuracy

● Controls the turret’s heat and vibration ● Reduced energy loss

■ Turret temperature increases

■ Vibration amplitude

1/10 or less

1/3 or less

■ Displacement amount

Previous model (5,000 min-1)

3.05 μm

NLX2500 (10,000 min-1)

0.43 μm

NLX2500/700NLX2500 MC/700

NLX2500 Y/700NLX2500 SMC/700NLX2500 SY/700

10 tools12 tools＊ OP

12 tools10, 16, 20 tools OP

＊ If the tool holder is used in common with CL, SL or Dura and an I.D. cutting tool is mounted on the adjacent station, interference with the 10-inch standard chuck will occur.

NLX2500 MC/1250NLX2500 Y/1250

NLX2500 SMC/1250NLX2500 SY/1250



Turret

2-axis turning

MC, Y, SMC

SY＊

＊Made by Sauter (12- station bolt-tightened turret only)

DMG MORI SEIKI has developed a new technology to circulate coolant through the casting parts as a measure against thermal displacement that directly affects machining accuracy. Thermal displacement is caused by various factors including non-uniform expansion and contraction due to difference in thickness of the casting; uneven heat generation in the slideways; operating environment; and changes in ambient temperature due to season and time of day. The coolant circulation maintains a uniform temperature inside the casting parts, and minimizes deformation in the machine.

When using oil-based coolant, please be sure to consult with our sales representative.

・Uniform thermal displacement

・Resistance to changes in ambient temperature

・High-accuracy long-term machining

■ Effects of coolant circulation

Coolant cooling system (Separate type)

Coolant circulation for casting parts

Raised coolant temperature causes thermal displacement in the fixtures and workpiece, affecting the machining

accuracy of the workpiece. Use this unit to prevent the coolant from heating up. When using oil-based coolant,

the coolant temperature can become extremely high even with the standard coolant pump, so please be sure to

select this unit.

● We cannot guarantee that this unit will completely control the coolant temperature. It is designed to help prevent oil temperature increases.

OP

Coolant circulation for casting parts

Main features High precision

Main features

OptionOP

＊ Excluding NLX2500/700 and NLX2500MC/700

20-station turret specifications for long-term operation at night and complex machining

This is a turret with the high-rigidity, high-accuracy quick-change specifications conforming to the

VDI tooling system. It reduces setup time by substantially shortening tool mounting time.

●　With the 20-station turret you can machine a wide range of workpieces,

including those for whichautomation used to be difficult because they require many processes.

●　By using a high-rigidity, compact tooling system,

we have achieved machining ability and versatility which matches those of machining centers.

Support for 20-station turret＊

12-station VDI quick-change turret (Sauter Trifix) <Y, SY>

OP

OP

■ Mounting repeatability

6 μm/200 mm (7.9 in.)

High-precision equipment

High precision

High-precision equipment

The absolute magnetic linear scale (full closed-loop control) made by Magnescale is

effective for high-precision positioning, and is available as an option.

OP

0.01 μm

■ Resolution

● High accuracy, high resolution

● Greater accuracy than optical scale

● Highly resistant to condensation and oil

● Vibration and impact resistant characteristics

Direct scale feedbackDirect scale feedback

Reduction in environmental burden

1,415 W

992 W

0

800

200

400

600

1,000

1,200

1,400

1,600

Conventional machine NLX2500SERIES

(W)

Approx. Reduced by

30 % 30 %

A wide door opening offers better operability.

820 mm (32.3 in.)

2-axis turning specifications offer improved access to

the spindle.

■ Access to the spindle


Distance from the front of the machine to the spindle center is shortened by45 mm (1.8 in.).

■ Door opening width

MC, Y, SMC, SY

MC, Y, SMC, SY

Door opening width

1,450 mm (57.1 in.)

To conserve limited resources and protect global environment.The NLX2500 Series pursues a high "environmental performance" that

is required of machine tools.

LED with high luminous efficiency offers a high light output at a low wattage,

contributing to reducing electricity use.

If the operation panel is not touched for a certain amount of time, the interior light turns off. This saves energy and lengthens the life of the machine lights.

If the keyboard is not touched for a certain amount of time and NC operation is not being performed, power is cut off to the servo motor, the spindle, the coolant pump and the chip conveyor, thereby saving energy.

Automatic machine light function

Automatic sleep function

Operating efficiently, the machine

reduces power consumption.

New NC (M730＋HF motor)

Inverter hydraulic unit

LED lighting

As a result...

Standby power has been reduced

by approximately 30% by reviewing

the motor configuration and

improving the power-saving

functions. The machine is not only

eco-friendly, but also cost-effective.

Improved workability Environmental performance

Improved workability

Improved workability <MC, Y, SMC, SY> Accessibility <2-axis turning>

Comparison of power consumption

Power-saving function

LED lighting

30% reduction in standby power

NLX2500/700

NLX2500/1250

30% reduction in standby power

Machine type NLX2500/700

Gantry loader

Max. transfer weight kg (lb.) 5 (11) <×2>

Max. travel speed

X-axis (Hand moves up and down) m/min (fpm) 180 (590.6)

Z-axis (Loader moves right and left) m/min (fpm) 200 (656.2)

Y-axis (Loader moves back and forth) m/min (fpm) －

Loader hand

Hand type Parallel hands

Jaw stroke (radius) mm (in.) 10 (0.4)

Applicable workpiece size

Outer diameter mm (in.) φ40−150 (φ1.6−5.9)

Length mm (in.) 20−120 (0.8−4.7)

Max. mass kg (lb.) 5 (11)

Work stocker

Workpiece stocker type Track-type rotary table with two lifters

Number of pallet tables 14 [20] [26]

Max. loading capacity kg (lb.)/pallet 35 (77)

■ Loader hand

A close confirmation switch comes as a standard feature, thus improving the reliability of the work chucking.

■ Work stocker

A ball caster wheel conveyor is used because it does not cause many chip problems.

Rotary workstocker Flat workstockerConsultation is required

Workstocker for shaft workpieces Consultation is required

Belt conveyorConsultation is required

Parallel hands Back end hands Hand for shaft workpiecesConsultation is required

■ GX-05

OP

Peripheral equipment


Gantry loader

Support for a variety of automation systems

We have prepared the GX-05 that has a separate type workpiece stocker.

This GX-05 achieves the world's top level, high speed performance.

■ Loader travel speed (travel)

200 m/min (656.2 fpm)

●Please consult with our sales representative in the case that a workpiece diameter is less than 40 mm (1.6 in.), or a workpiece length is less than 20 mm (0.8 in.).

Transfer unit Consultation is required Turnover unit Consultation is required Transfer turnover unit Consultation is required Washing unit Consultation is required

Measuring system Consultation is required Quality inspection station Consultation is required

■14-station rotary workstocker

■Spindle orientation

■Hand air-blow

■Low air pressure detecting switch

■Air blow for chuck

■Ceiling shutter

■Auto power off

■Loader interface

Optional features

Standard features

■Others Consultation is required

● Turret-mounted workpiece-pusher

● 20-, 26-station rotary workstocker

● Pallet suitable for hexagonal workpieces

● Workpiece holding detector

●Mist collector

●External emergency stop button

●Ejecting chuter <NG, quality>

● For special accessories and specifications, please consult with our sales representative.

Gantry loader

■ Gantry-type loader system variations

Specifications

Other specifications

Type AⅠ Type AⅡ Type AⅢ Type AⅣ

1 2 122 123 3

1 233

MachineWork stockerLoaderTurnover unit

Units 1234

Type CⅠ Type CⅡ

Type CⅣ

Type EⅢ

Type CⅢ

31 12

43

1 1 24

31 12

43

1 1 24

2 1 14

23 3

Consultation is required

●Separate consultation is required for hollow cylinder specifications. (Type AⅠ, Type AⅢ, Type CⅠ, Type CⅢ, Type EⅢ)

OptionOP

Recommended accessories for bar feeder specification

● Bar feeder● Multi counter● Signal tower

● Guide bushing● Work stopper

OPExternal chip conveyor

OP

●Bar work capacity: Depending on the chuck/cylinder used and its restrictions, it may not be possible to reach full bar work capacity.

Bar feeder

Complete bar machining is possible on a single machine when coupled with a

workpiece unloader. You won’t need a work loader/unloader or turnover unit.

OP

φ80 mm (φ3.1 mm)

■ Bar work capacity

Specifications

Workpiece material and chip size　　◎: Optimum　○: Suitable　×: Not suitable

Steel Cast iron Aluminum, non-ferrous metal

Long Short Powdery Short Long Short Powdery

Hinge type ○ ○ × × ○ × ×Hinge type (Aluminum) × × × × × ○ ×Scraper type × ○ ○ ○ × × ×Magnet scraper type × ◎ ◎ ◎ × × ×

●The options table below the general options when using coolant. Changes may be necessary if you are not using coolant,or depending on the amount of coolant, compatibility with machines, or the specifications required.

●Please select a chip conveyor to suit the shape of your chips. When using special or difficult-to-cut material (chip hardness HRC45 or higher), please consult with our sales representative.●We have prepared several options for different chip shapes and material.

For details, please consult with our sales representative.

Workpiece unloader＊ (built-in type)

Bar feeder system



Chip size guidelines

Short: chips 50 mm (2.0 in.) or less in length, bundles of chips φ40 mm (φ1.6 in.) or less

Long: bigger than the above

We have further developed the previous parts catcher so that it can now be

customized more easily by the end user. Both spindles handle workpieces

up to double the previous length.

＊Standard for SMC, SY types. (Not including gantry loader specifications)●Not available when the steady rest is selected, because of interference.

For standard machines, it is necessary to remove the workpiece unloader when the steady rest specifications are selected.

φ80 mm(φ3.1 in.)

■ Applicable workpiece diameter

200 mm(7.9 in.)

■ Applicable workpiece length

3.0 kg(6.6 lb.)

■ Max. transfer weight

● This type of workpiece unloader is optional for the MC type with a distance between centers of 700 mm (27.6 in.).

● This type of workpiece unloader is optional for the MC type with a distance between centers of 1,250 mm (49.2 in.).

Turning Y, SMC, SY

OptionOP

DMSQP (DMG Mori Seiki Qualified Products) OP

Package OP

Comprehensive support with machine+ peripherals

DMG MORI SEIKI Service Center

■ Advantages of DMSQP● Qualified peripherals are arranged by DMG MORI SEIKI● Two-year warranty, the same as machines

(Parts relating to machine breakdown will be guaranteed free for 2 years from the date of installation, and labor costs to repair will be free for 1 year)

● Toll-free phone support is available 24 hours a day, 365 days a year (Japan only)

Coolant cooling system

Mist collector

Hydraulic steady rest

DMSQP

● For more details on DMSQP items, please contact our sales representative.

The DMSQP program is designed to certify peripherals that meet DMG MORI SEIKI standards in quality, performance and maintainability. DMSQP provides customers with even greater peace of mind.

Selected peripherals with superior quality, performance and maintainability.

DMG MORI SEIKI provides comprehensive support, from proposal to delivery and maintenance, for high-quality peripherals that offer superior performance and maintainability.

Comprehensive support with machine＋peripherals #

Machine

● For more details on packages, please contact our sales representative.

Example of packages #

Packages are available according to varieties of customers’ production forms.

Basic package Chip disposal package Rotary tool holder package

NLX2500_EB16ABV_FORM.indd 1 13/12/02 11:51

MAPPS Ⅳ

for CNC Lathes

High-performance operating system that pursues ease of use, and combines the best hardware in the industry with the advanced application/network systems.

Fixed-point in-machine cameraImages taken by cameras installed inside/outside the machine can be viewed on the programming screen. This function is useful for maintenance.

Examples of camera locations・　 Inside machine

(to check machining)

・　 Tool magazine (to check cutting tools)

・　 Chip bucket (to check chip accumulation)

Outstanding operability

Improved work efficiency

MAPPS: Mori Advanced Programming Production System

High-Performance Operating System

Alarm help functionWhen an alarm occurs, MAPPS identifies the cause of the trouble and provides solutions.

Improved ease of maintenance

File display and Memo functionData necessary for setups such as operating instructions, drawing data and text data can be viewed on MAPPS. Text data is editable.

Improved ease of setupProgram management

Viewable file types

・　PDF ・　 TXT (Editable)

・　 Any file that can be displayed with Internet Explorer is available

● 10.4-inch operation panel

● Macro programs such as GOTO, IF and WHILE cannot be used in DNC operating programs.

Vertical soft-keys

Keyboard

Mouse tray OP

The vertical soft-keys can be used as option buttons or shortcut keys to which you can assign your desired screens and functions, allowing you to quickly display the screen you want.

A PC-type keyboard is used as standard, making key input easy.

The mouse tray can be attached when using a mouse.

Mouse tray OP

▶　Outstanding operability thanks to upgraded hardware▶　Enhanced functionality by using CAM software (option)▶　New functions for easier setup and maintenance▶　 Various types of monitoring, including internal monitoring,

are possible on the screen (option)▶　 In the event of trouble, DMG MORI SEIKI’s remote maintenance

service solves it smoothly MORI-NET Global Edition Advance OP

MAPPS Ⅳ ＋ ESPRIT®

Consultation is requiredOP

DNC operation with external memory (USB) OP

DNC operation can be performed using programs stored in an external memory (USB). It is also possible to transfer data between an external memory and the NC memory and delete/copy/rename programs in an external memory.


MAPPS Ⅳ

■ Machining menu ■ Contour input■ List display function

■ DXF import function＊1 OP■ Relief machining OP

■ Simple soft jaw forming function

● The photo shown may differ from actual machine.● Information about the screen is current as of November 2013.

OptionOP

■ Remote Desktop <Patent pending> ■ License borrowing system ■ Support system

This function allows users to create programs simply by following the guidance on the screen.Much of the programming process has been simplified due to the minimal key entry required for even the most complex shapes.

ESPRIT® allows you to create complex 3D programming with high-added value. By just installing the software on your PC with connection to LAN, you will be able to use it. (Once the software is started on the computer, it can be used for up to 7 days without LAN connection)

ESPRIT® installed on your PC can be operated from your machine via LAN.＊3 (It cannot be simultaneously started up on more than one PC)

By borrowing the ESPRIT® license from the machine over LAN, ESPRIT® can be run on the PC up to 7 days without LAN connection (or turning on the machine).

Distributors/Trading companies, DMG MORI SEIKI Technical Centers and ESPRIT® Support Team will answer inquiries about the CAM software.

Conversational automatic programming

CAM software

● Postprocessor as standard● CAM software will be ready to use once your machine is installed● Cost for introducing CAM software can be saved● ESPRIT® data can be modified on the machine

(through Remote Desktop connection＊2)

● The software can be installed on multiple PCs on the network (It cannot be simultaneously started up on more than one PC)

● 2-year warranty support (including free update)

MORI Automatic Programming System for Lathes

OP

Application systems which let you create machining programs easily on your PC.

● Easy operation, simply by entering the product shapes while following the instructions on the screen.

● Its functions, data and operability are fully compatible with the conversational programming system of the MAPPS Ⅳ operating systems.

OP

LAN LAN

Machine

PCMachine PC

ESPRIT®

LicenseESPRIT®

LicenseLicense

Borrow license

ESPRIT® is available up to 7 days with no LAN connection

Remotely operate the PC screen from MAPPS

＊1 A mouse is required. Please prepare a mouse by yourself.

＊2 Applicable Operating Systems: Windows® Vista Business/Ultimate, Windows® 7 Professional/Ultimate＊3 A mouse is required. Please prepare a mouse by yourself.● A PC is required to use ESPRIT®. Please prepare PCs by yourself.


MAPPS Ⅳ

This is an application which allows you to remotely operate and view the MAPPS screens from your office computer.

This enables high-speed transfer of programming data between your office computer and machine, reducing the lead time of pre-machining processes.

DMG MORI SEIKI’s software Line-up

For shorter total production time for all our customers

This network system application achieves fast information sharing and increased production effi ciency.

Remote Maintenance/Machine Operation Monitoring Service

Machine Operation Monitoring System

Application for Data Transmission MAPPS Screen Remote Control and Browsing Application

【Plant】

【Plant】

[Standard features]

Receive e-mail notifi cation

View operating status report


【DMG MORI SEIKI’s Service Center】

【Company’s own server】

Server

Hub

Router

●　 Remote maintenance service by DMG MORI SEIKI Service Center

●　 Internet-based, high speed (max. 1 Gbps), large capacity network

●　 No server installation is required ― reduction in initial cost

●　 Download various data from the server located at DMG MORI SEIKI

●　 Intra-corporate network system

●　 Up to 30 machines can be connected with one server

●　 The operating status of your machines can be centrally managed in real time

■ Features

■ Features

【Office】

【Outside the office】


Receive remote diagnosis

Download data

Download data

Send alarm notifi cation

Hub

OP

OP

OP

Store operating status reports


【Office】


<Real time>Check operating status

■ Remote alarm support

When an alarm goes off, an alarm notification will be sent to the DMG MORI SEIKI Service Center simply by pressing the “Send e-mail” button on MAPPS. DMG MORI SEIKI service personnel will remotely diagnose the cause of the problem, and quickly provide solutions for machine recovery.

【Plant】【Plant】【DMG MORI SEIKI’s Service Center】

① E-mail describing the details of the alarm is sent to the Service Center from MAPPS.

② Remotely diagnose the cause of the problem.

③ Provide appropriate solutions for the problem, such as conducting remote operation, delivering replacement parts and sending service personnel.②

Problem Recovery

Upon receiving the alarm, the Service Center will contact the customer by phone. (Manual or Automatic alarm sending is selectable)

If recovery is not possible by remote operation, service personnel will quickly visit the customer’s factory.●　 This service may not be available in some

areas. Please contact our sales representative for details.


Conduct remote diagnosis



MORI-NET, MORI-SERVER, MORI-MONITORNetwork Application Systems

【Internet】【LAN】

NETWORK_E01_cs5.indd 1 13/09/19 19:57

OptionOP

DMG MORI SEIKI’s new proposal, ACT, is designed to strengthen connections between machine tools and peripheral equipment by standardizing communication and software of the entire system. With ACT, standardization of interfaces of peripherals, simplified wiring, and labor saving can be achieved.

This industrial network using the standard Ethernet (TCP/IP) offers high speed and reliable connection. Simple Plug and Play connections, which are made available just by connecting to the hub through MAPPS, enable you to build a system easily.The use of standard cables also helps to reduce costs.

MTConnect, which was introduced by the Association for Manufacturing Technology (AMT) in 2008, is a new XML (Extensible Markup Language) based communication protocol that offers an open interface. This interface allows you to build a system to monitor the operating status of your machines.

Advanced Communication Technology

MAPPS EtherNet/IP I/F OP

MAPPS MTConnect I/F

Advanced Communication Technology (ACT) connects machine tool and peripheral devices

■ Easy system construction■ Connection with existing devices■ Inexpensive devices

You can check the operating history on the Gantt chart screen.

●　 Connections between a machine and peripheral equipment become easy because standard LAN cables are used

●　 Thanks to increased versatility, your peripheral equipment can be used even when the machine tools are replaced by new ones

●　 Reliability is significantly increased by reducing the number of I/O cables

●　 Open communication interface allows you to access to your company’s system

●　 This makes it possible for you to build a system to monitor the operating status of your machines via the Internet

■ Features

■ Features

■ System examples

Operating status can be checked in real time.

Your machines are displayed all at once, allowing you to quickly call up the machine you wish to check.

■ Application examples

Industrial Network for Peripheral Equipment Control

Communication Interface for Monitoring Machine Operation

●　 A server and application must be prepared by the customer.●　For introduction of MTConnect, separate consultation is required.


Other devices

Measuring equipment Tool presetter

Machine

Hub

Robot

Adapter 1

ServerAdapter 2

Adapter 3

Outside the offi ce

Offi ce

Other terminal deviceAgent 1

Agent 2

Application

Router

NETWORK_E01_cs5.indd 2 13/09/19 19:57

MAPPS Ⅳ

③


MAPPS Ⅳ

This is an application which allows you to remotely operate and view the MAPPS screens from your office computer.

This enables high-speed transfer of programming data between your office computer and machine, reducing the lead time of pre-machining processes.

DMG MORI SEIKI’s software Line-up

For shorter total production time for all our customers

This network system application achieves fast information sharing and increased production effi ciency.

Remote Maintenance/Machine Operation Monitoring Service

Machine Operation Monitoring System

Application for Data Transmission MAPPS Screen Remote Control and Browsing Application

【Plant】

【Plant】

[Standard features]




【DMG MORI SEIKI’s Service Center】

【Company’s own server】

Server

Hub

Router

●　 Remote maintenance service by DMG MORI SEIKI Service Center

●　 Internet-based, high speed (max. 1 Gbps), large capacity network

●　 No server installation is required ― reduction in initial cost

●　 Download various data from the server located at DMG MORI SEIKI

●　 Intra-corporate network system

●　 Up to 30 machines can be connected with one server

●　 The operating status of your machines can be centrally managed in real time

■ Features

■ Features

【Office】



Receive remote diagnosis

Download data

Download data


Hub

OP

OP

OP



【Office】


<Real time>Check operating status

■ Remote alarm support

When an alarm goes off, an alarm notification will be sent to the DMG MORI SEIKI Service Center simply by pressing the “Send e-mail” button on MAPPS. DMG MORI SEIKI service personnel will remotely diagnose the cause of the problem, and quickly provide solutions for machine recovery.

【Plant】【Plant】【DMG MORI SEIKI’s Service Center】

① E-mail describing the details of the alarm is sent to the Service Center from MAPPS.

② Remotely diagnose the cause of the problem.

③ Provide appropriate solutions for the problem, such as conducting remote operation, delivering replacement parts and sending service personnel.②

Problem Recovery

Upon receiving the alarm, the Service Center will contact the customer by phone. (Manual or Automatic alarm sending is selectable)

If recovery is not possible by remote operation, service personnel will quickly visit the customer’s factory.●　 This service may not be available in some

areas. Please contact our sales representative for details.


Conduct remote diagnosis



MORI-NET, MORI-SERVER, MORI-MONITORNetwork Application Systems


NETWORK_E01_cs5.indd 1 13/09/19 19:57

OptionOP

DMG MORI SEIKI’s new proposal, ACT, is designed to strengthen connections between machine tools and peripheral equipment by standardizing communication and software of the entire system. With ACT, standardization of interfaces of peripherals, simplified wiring, and labor saving can be achieved.

This industrial network using the standard Ethernet (TCP/IP) offers high speed and reliable connection. Simple Plug and Play connections, which are made available just by connecting to the hub through MAPPS, enable you to build a system easily.The use of standard cables also helps to reduce costs.

MTConnect, which was introduced by the Association for Manufacturing Technology (AMT) in 2008, is a new XML (Extensible Markup Language) based communication protocol that offers an open interface. This interface allows you to build a system to monitor the operating status of your machines.

Advanced Communication Technology

MAPPS EtherNet/IP I/F OP

MAPPS MTConnect I/F

Advanced Communication Technology (ACT) connects machine tool and peripheral devices

■ Easy system construction■ Connection with existing devices■ Inexpensive devices

You can check the operating history on the Gantt chart screen.

●　 Connections between a machine and peripheral equipment become easy because standard LAN cables are used

●　 Thanks to increased versatility, your peripheral equipment can be used even when the machine tools are replaced by new ones

●　 Reliability is significantly increased by reducing the number of I/O cables

●　 Open communication interface allows you to access to your company’s system

●　 This makes it possible for you to build a system to monitor the operating status of your machines via the Internet

■ Features

■ Features

■ System examples

Operating status can be checked in real time.

Your machines are displayed all at once, allowing you to quickly call up the machine you wish to check.

■ Application examples

Industrial Network for Peripheral Equipment Control

Communication Interface for Monitoring Machine Operation

●　 A server and application must be prepared by the customer.●　For introduction of MTConnect, separate consultation is required.


Other devices

Measuring equipment Tool presetter

Machine

Hub

Robot

Adapter 1

ServerAdapter 2

Adapter 3

Outside the offi ce

Offi ce

Other terminal deviceAgent 1

Agent 2

Application

Router

NETWORK_E01_cs5.indd 2 13/09/19 19:57

OptionOP


Item NLX2500/700 NLX2500MC/700

Capacity

Swing over bed mm (in.) 590 (23.2) 787 (31.0) <interference with front cover: 486 (19.1)>

Swing over cross slide mm (in.) 360 (14.2) 541 (21.3)

Max. turning diameter mm (in.) 460 (18.1) 366 (14.4)＊1 356 (14.0)＊2

Standard turning diameter mm (in.) 268 (10.5)＊3 [217 (8.5)＊4] 271 (10.7)＊1 275 (10.8)＊2

Max. turning length mm (in.) 728 (28.6) 705 (27.7)

Bar work capacity mm (in.) 80 (3.1)＊5 [89 (3.5)＊6] 80 (3.1) [90 (3.5)＊7] [102 (4.0)＊7]

TravelX-axis mm (in.) 260 (10.2)

Z-axis mm (in.) 795 (31.3)

Spindle 1

Max. spindle speed min-1 3,500[4,000] [2,500＊6] [3,000＊6] 4,000 [4,000] [2,500＊7]

Spindle nose JIS A2-8

Through-spindle hole diameter mm (in.) 91 (3.6) [105 (4.1)＊8] 91 (3.6) [111 (4.4)＊8]

Spindle bearing inner diameter mm (in.) 130 (5.1)＊5 [150 (5.9)＊6] 140 (5.5)＊5 [160 (6.2)＊7]

Min. spindle indexing increment - 0.001°

Turret

Number of tool stations 10 [12＊9]

Shank height for square tool mm (in.) 25 (1.0)

Shank diameter for boring bar mm (in.) Max.: 50 (2.0) 50 (2.0)＊10

Turret indexing time sec. 0.34＊11 0.27＊11

Max. rotary tool spindle speed min-1 - 10,000

Feedrate Rapid traverse ratemm/min

(ipm)X, Z: 30,000 (1181.1),

Tailstock: 20,000 (787.4) <Retract>＊12, 7,000 (275.6) <Extend>

Tailstock

Tailstock travel mm (in.) 650 (25.6) 734 (28.9)

Taper hole of tailstock spindleLive center: MT5

[Built-in center: MT3] [Built-in center: MT4]

Motors

Motor for Spindle 1

3,500 min-1 kW (HP) 18.5/15 (24.7/20) <30 min./cont> -

4,000 min-1 kW (HP) - 18.5/18.5/15 (24.7/24.7/20) <25%ED/50%ED/cont>

[4,000 min-1 (High speed, High-torque)] kW (HP) 18.5/15 (24.7/20) <30 min./cont> -

[4,000 min-1 (High output)] kW (HP) 26/22 (34.7/30) <30 min./cont> 26/26/22 (34.7/34.7/30) <10 min./30 min./cont>

[2,500 min-1] kW (HP) 　18.5/15 (24.7/20) <30 min./cont>＊6 　22/18.5 (30/24.7) <30 min./cont>＊7

[3,000 min-1] kW (HP) 　18.5/15 (24.7/20) <30 min./cont>＊6 -

Rotary tool spindle drive motor 10,000 min-1 kW (HP) -5.5/5.5/3.7 (7.5/7.5/5) <3 min./5 min./cont>

[5.5/5.5/3.7 (7.5/7.5/5) <3 min./5 min./cont>]＊13

Feed motor kW (HP) X: 2.0 (2.7), Z: 3.0 (4.0)

Power sources(Standard)

Electrical power supply (cont) I94288A09 kVA 24.8 29.4

Compressed air supply MPa (psi), L/min (gpm) - 0.5 (72.5), 50 (13.2) <ANR>

Tank capacity Coolant tank capacity L (gal) 260 (68.6) 340 (89.8)

Machine size

Machine height mm (in.) 1,752 (69.0) 1,900 (74.8)

Floor space (width × depth) <Including a chip conveyor> mm (in.)3,699×1,814 (145.6×71.4) <Right discharge>2,560×2,718 (100.8×107.0) <Rear discharge>

3,994×1,980 (157.2×78.0) <Right discharge>3,036×2,907(119.5×114.4) <Rear discharge>

Mass of machine kg (lb.) 4,500 (9,900) 5,500 (12,100)

Noise data A-weighted, time-average radiated sound pressure level dB 58−67 (measurement uncertainty is 4 dB)

[ ] Option＊1 For O.D. cutting tool with an overhang of 35 mm (1.4 in.)＊2 For O.D. cutting tool with an overhang of 40 mm (1.6 in.)＊3 10-station turret specifications＊4 12-station turret specifications (Option)＊5 Through-spindle hole diameter φ91 mm (φ3.5 in.)＊6 Through-spindle hole diameter φ105 mm (φ4.1 in.) <Option>＊7 Through-spindle hole diameter φ111 mm (φ4.3 in.) <Option>＊8 Only for 12 inch chuck unit＊9 If the tool holder is used in common with CL, SL or Dura and an I.D. cutting tool is mounted on the adjacent station, interference with the 10-inch standard chuck will occur.＊10 Double boring holder＊11 This time is measured when the number of tools attached to the turret is half the number of tool stations. The turret indexing time may be longer depending on the number and arrangement of tools.＊12 When the fixed steady rest, hydraulic steady rest (bolt-tightened) or hydraulic tailstock is selected, the retraction speed of the tailstock spindle is limited to 7 m/min.＊13 12-station bolt-tightened turret specification● Bar work capacity: Depending on the chuck/cylinder used and its restrictions, it may not be possible to reach full bar work capacity.● Max. spindle speed: Max. spindle speed: Depending on restrictions imposed by the workpiece clamping device, fixture and tool used, it may not be possible to rotate at the maximum spindle speed.● ANR: ANR refers to a standard atmospheric state; i.e., temperature at 20°C (68°F); absolute pressure at 101.3 kPa (14.7 psi); and relative humidity at 65%.● Power sources・Machine size: the actual values may differ from those specified in the catalogue, depending on the optional features and peripheral equipment.●Compressed air supply: Please be sure to supply clean compressed air <air pressure: 0.7 MPa (101.5 psi), pressure dew point: 10℃ (50°F) or below>. ● A criterion capacity to select a compressor is 90 L/min (23.8 gpm) per 0.75 kW (1 HP). However, this figure may differ depending on the type of compressors and options attached. For details, please check the compressor specifications.● When the tool tip air blow is regularly used, air supply of more than 300 L/min (79.2 gpm) is separately required.● Noise data: the measurement was performed at the front of the NLX2500/700 machine with a maximum spindle speed of 4,000 min-1. For details, please consult with our sales representative.● The information in this catalog is valid as of November 2013.

NLX2500/700（121107）NLX2500MC/700（131126）

Machine specifications

Item NLX2500Y/700 NLX2500SMC/700 NLX2500SY/700

Capacity

Swing over bed mm (in.) 920 (36.2) <interference with front cover: 589 (23.2)>

Swing over cross slide mm (in.) 742 (29.2)

Max. turning diameter mm (in.) 366 (14.4)＊1 356 (14.0)＊2 [348 (13.7) <16-station Turret> ] [278 (10.9) <20-station Turret> ]

Standard turning diameter mm (in.) 271 (10.7)＊1 275 (10.8)＊2 [206 (8.1) <16-station Turret> ] [192 (7.6) <20-station Turret> ]

Max. turning length mm (in.) 705 (27.7)

Bar work capacity mm (in.)80 (3.1)

[90 (3.5) <Through-spindle hole diameter φ111 mm (φ4.3 in.)>] [102 (4.0) <Through-spindle hole diameter φ111 mm (φ4.3 in.)>]

Travel

X-axis mm (in.) 260 (10.2)

Y-axis mm (in.) ±50 (±2.0) - ±50 (±2.0)

Z-axis mm (in.) 795 (31.3)

Spindle 2 travel (B-axis) mm (in.) - 734 (28.9)

Spindle 1

Max. spindle speed min-1 4,000 [4,000] [2,500<Through-spindle hole diameter φ111 mm (φ4.3 in.)>]


Through-spindle hole diameter mm (in.) 91 (3.5) [111 (4.3)＊3]

Spindle bearing inner diameter mm (in.) 140 (5.5)

Min. spindle indexing increment 0.001°

Spindle 2

Max. spindle speed min-1 - 6,000 [5,000 <Through-spindle hole diameter φ73 mm (φ2.8)>]

Spindle nose - JIS A2-5 [JIS A2-6 <Through-spindle hole diameter φ73 mm (φ2.8)>]

Through-spindle hole diameter mm (in.) - 43 (1.6) [73 (2.8) <Through-spindle hole diameter φ73 mm (φ2.8)>]

Spindle bearing inner diameter mm (in.) - 85 (3.3) [120 (4.7) <Through-spindle hole diameter φ73 mm (φ2.8)>]

Min. spindle indexing increment - 0.001°

Turret

Number of tool stations 12 [10] [16] [20]

Shank height for square tool mm (in.) 25 (1.0) [20 (0.8) <16, 20-station Turret>]

Shank diameter for boring bar mm (in.) 50 (2.0) <Headstock 2 side 32 (1.3)> [32 (1.3)＊4] [25 (1.0) <16-station Turret>] [32 (1.3) <20-station Turret>]

Turret indexing time sec. 0.27＊5

Max. rotary tool spindle speed min-1 10,000


(ipm)

X, Z: 30,000 (1,181.1), Y: 10,000 (393.7),


X, Z, B: 30,000 (1,181.1)X, Z, B: 30,000 (1,181.1),

Y: 10,000 (393.7)

Tailstock

Tailstock travel mm (in.) 734 (28.9) -

Taper hole of tailstock spindleLive center: MT5

[Built-in center: MT3][Built-in center: MT4]

-

Motors

Motor for Spindle 1

4,000 min-1 kW (HP) 18.5/18.5/15 (24.7/24.7/20) <25%ED/50%ED/cont>

[4,000 min-1 (High output)] kW (HP) 26/26/22 (34.7/34.7/30) <10 min./30 min./cont>

[2,500 min-1] kW (HP) 22/18.5 (30/24.7) <30 min./cont> <Through-spindle hole diameter φ111 mm (φ4.3 in.)>

Spindle 2 drive motor6,000 min-1 kW (HP) - 11/7.5 (15/10) <25%ED/cont>

[5,000 min-1] kW (HP) - 11/7.5 (15/10) <25%ED/cont> <Through-spindle hole diameter φ73 mm (φ2.8)>

Rotary tool spindle drive motor 10,000 min-1 kW (HP)5.5/5.5/3.7 (7.5/7.5/5) <3 min./5 min./cont>＊7

[10.7/6.1 (14.3/8.1) <15%ED/100%ED>]＊8 5.5/5.5/3.7 (7.5/7.5/5) <3 min./5 min./cont>5.5/4.2 (7.5/5.6) <25%ED/100%ED>＊9

[5.5/5.5/3.7 (7.5/7.5/5) <3 min./5 min./cont>]＊10

[10.7/6.1 (14.3/8.1) <15%ED/100%ED>]＊8

Feed motor kW (HP)X, Y, Z: 3.0 (4.0),

Tailstock: 2.0 (2.7)X, B: 2.0 (2.7), Z: 3.0 (4.0) X, Y, Z: 3.0 (4.0), B: 2.0 (2.7)

Power sources(Standard)

Electrical power supply (cont) I94288A09 kVA 33.5 33.8 37.6

Compressed air supply MPa (psi), L/min (gpm) 0.5 (72.5), 50 (13.2) <ANR> 0.5 (72.5), 150 (39.6) <ANR>

Tank capacity Coolant tank capacity L (gal) 367 (96.9)

Machine size

Machine height mm (in.) 2,187 (86.1)

Floor space (width × depth) <Including a chip conveyor> mm (in.)3,994×2,080 (157.2×81.9) <Right discharge>3,056×2,977 (120.3×117.2) <Rear discharge>

Mass of machine kg (lb.) 6,140 (13,508) 6,040 (13,288) 6,360 (13,992)

Noise data A-weighted, time-average radiated sound pressure level dB 58−67 (measurement uncertainty is 4 dB)

[ ] Option＊1 For O.D. cutting tool with an overhang of 35 mm (1.4 in.)＊2 For O.D. cutting tool with an overhang of 40 mm (1.5 in.)＊3 Only for 12 inch chuck unit＊4 Double boring holder＊5 This time is measured when the number of tools attached to the turret is half the number of tool stations. The turret indexing time may be longer depending on the number and arrangement of tools.＊6When the fixed steady rest, hydraulic steady rest (bolt-tightened) or hydraulic tailstock is selected, the retraction speed of the tailstock spindle is limited to 7 m/min.＊710-station/12-station bolt-tightened turret, 16-station VDI turret, and 20-station bolt-tightened turret specifications＊8 12-station VDI quick-change turret (Sauter Trifix) specification＊9 12-station bolt-tightened turret specification＊10 10-station bolt-tightened turret, 16-station VDI turret, and 20-station bolt-tightened turret specifications● Bar work capacity: Depending on the chuck/cylinder used and its restrictions, it may not be possible to reach full bar work capacity.● Max. spindle speed: Max. spindle speed: Depending on restrictions imposed by the workpiece clamping device, fixture and tool used, it may not be possible to rotate at the maximum spindle speed.● ANR: ANR refers to a standard atmospheric state; i.e., temperature at 20°C (68°F); absolute pressure at 101.3 kPa (14.7 psi); and relative humidity at 65%.● Power sources/Machine size: the actual values may differ from those specified in the catalogue, depending on the optional features and peripheral equipment.● Compressed air supply: Please be sure to supply clean compressed air <air pressure: 0.7 MPa (101.5 psi), pressure dew point: 10℃ (50°F) or below>. ● A criterion capacity to select a compressor is 90 L/min (23.8 gpm) per 0.75 kW (1 HP). However, this figure may differ depending on the type of compressors and options attached. For details, please check the compressor specifications.● When the tool tip air blow is regularly used, air supply of more than 300 L/min (79.2 gpm) is separately required.● Noise data: the measurement was performed at the front of the NLX2500/700 machine with a maximum spindle speed of 4,000 min-1. For details, please consult with our sales representative.● The information in this catalog is valid as of November 2013.

NLX2500Y,SMC,SY/700（131126）

Machine specifications

Specifications

Item NLX2500MC/1250 NLX2500Y/1250 NLX2500SMC/1250 NLX2500SY/1250

Capacity

Swing over bed mm (in.) 920 (36.2) <interference with front cover: 615 (24.2)>

Swing over cross slide mm (in.) 742 (29.2)

Max. distance between spindle large noses mm (in.) ― 1,511 (59.4)

Max. turning diameter mm (in.) 366 (14.4)＊1 356 (14.0)＊2 [348 (13.7) <16-station Turret> ] [278 (10.9) <20-station Turret> ]

Standard turning diameter mm (in.) 271 (10.7)＊1 275 (10.8)＊2 [206 (8.1) <16-station Turret> ] [192 (7.6) <20-station Turret> ]

Max. turning length mm (in.) 1,255 (49.4)

Bar work capacity mm (in.)80 (3.1)

[90 (3.5) <Through-spindle hole diameter φ111 mm (φ4.3 in.)>] [102 (4.0) <Through-spindle hole diameter φ111 mm (φ4.3 in.)>]

Travel

X-axis mm (in.) 260 (10.2)

Y-axis mm (in.) ― ±50 (±2.0) ― ±50 (±2.0)

Z-axis mm (in.) 1,345 (53.0)

Spindle 2 travel (B-axis) mm (in.) ― 1,284 (50.6)

Spindle 1

Max. spindle speed min-1 4,000 [4,000] [2,500 <Through-spindle hole diameter φ111 mm (φ4.3 in.)>]


Through-spindle hole diameter mm (in.) 91 (3.5) [111 (4.3) <Only for 12 inch chuck unit>]

Spindle bearing inner diameter mm (in.) 140 (5.5)

Min. spindle indexing increment 0.001°

Spindle 2

Max. spindle speed min-1 ― 6,000 [5,000 <Through-spindle hole diameter φ73 mm (φ2.8)>]

Spindle nose ― JIS A2-5 [JIS A2-6 <Through-spindle hole diameter φ73 mm (φ2.8)>]

Through-spindle hole diameter mm (in.) ― 43 (1.6) [73 (2.8) <Through-spindle hole diameter φ73 mm (φ2.8)>]

Spindle bearing inner diameter mm (in.) ― 85 (3.3) [120 (4.7) <Through-spindle hole diameter φ73 mm (φ2.8)>]

Min. spindle indexing increment ― 0.001°

Turret

Number of tool stations 10 [12] [16] [20] 12 [10] [16] [20]

Shank height for square tool mm (in.) 25 (1.0) [20 (0.8) <16, 20-station Turret> ]

Shank diameter for boring bar mm (in.) 50 (2.0) <Headstock 2 side 32 (1.3)> [32 (1.3)＊3 ] [25 (1.0) <16-station Turret>] [32 (1.3) <20-station Turret>]

Turret indexing time sec. 0.27＊4

Max. rotary tool spindle speed min-1 10,000


(ipm)

X, Z: 30,000 (1,181.1) Tailstock: 20,000 (787.4) <Retract>＊5,

7,000 (275.6) <Extend>

X, Z: 30,000 (1,181.1), Y: 10,000 (393.7)


X, Z, B: 30,000 (1,181.1)X, Z, B: 30,000 (1,181.1)

Y: 10,000 (393.7)

TailstockTailstock travel mm (in.) 1,284 (50.6) ―

Taper hole of tailstock spindle Live center: MT5 [Built-in center: MT4] ―

Motors

Motor for Spindle 1

4,000 min-1 kW (HP) 18.5/18.5/15 (24.7/24.7/20) <25%ED/50%ED/cont>

[4,000 min-1 (High output)] kW (HP) 26/26/22 (34.7/34.7/30) <10 min./30 min./cont>

[2,500 min-1] kW (HP) 　22/18.5 (30/24.7) <30 min./cont> <Through-spindle hole diameter φ111 mm (φ4.3 in.)>

Spindle 2 drive motor

6,000 min-1 kW (HP) - 11/7.5 (15/10) <25%ED/cont>

[5,000 min-1] kW (HP) -11/7.5 (15/10) <25%ED/cont>

<Through-spindle hole diameter φ73 mm (φ2.8)>

Rotary tool spindledrive motor

10,000 min-1 kW (HP)

5.5/5.5/3.7 (7.5/7.5/5)<3 min./5 min./cont>

[5.5/5.5/3.7 (7.5/7.5/5)<3 min./5 min./cont>]＊9

5.5/5.5/3.7 (7.5/7.5/5) <3 min./5 min./cont>[10.7/6.1 (14.3/8.1) <15%ED/100%ED>]＊6

[5.5/5.5/3.7 (7.5/7.5/5) <3 min./5 min./cont>]＊7

5.5/5.5/3.7 (7.5/7.5/5)<3 min./5 min./cont>

[5.5/5.5/3.7 (7.5/7.5/5)<3 min./5 min./cont>]＊7

5.5/4.2 (7.5/5.6) <25%ED /100%ED>＊8

[5.5/5.5/3.7 (7.5/7.5/5) <3 min./5 min./cont>]＊7

[10.7/6.1 (14.3/8.1) <15%ED/100%ED>]＊6

Feed motor kW (HP)X: 2.0 (2.7), Tailstock: 3.0 (4.0),

Z: 4.5 (6.0)X, Y, Tailstock: 3.0 (4.0),

Z: 4.5 (6.0)X: 2.0 (2.7), Z: 4.5 (6.0),

B: 3.0 (4.0)X, Y, B: 3.0 (4.0),

Z: 4.5 (6.0)

Power sourcesElectrical power supply (cont) I94288A09 kVA 31.6 35.4 36.3 39.6

Compressed air supply MPa (psi), L/min (gpm) 0.5 (72.5), 50 (13.2) <ANR> 0.5 (72.5), 150 (39.6) <ANR>

Tank capacity Coolant tank capacity L (gal) 420 (110.9)

Machine size

Machine height mm (in.) 2,265 (89.2)

Floor space (width × depth) <Including a chip conveyor> mm (in.) 5,049×2,200 (198.8×86.6)

Mass of machine kg (lb.) 7,220 (15,884) 7,540 (16,588) 7,440 (16,368) 7,760 (17,072)

[ ] Option＊1 For O.D. cutting tool with an overhang of 35 mm (1.4 in.)＊2 For O.D. cutting tool with an overhang of 40 mm (1.6 in.)＊3 For double boring holder＊4 If the number of tools is half or less than half and the turret indexing function is ON, turret indexing time is 0.27 sec＊5 When the fixed steady rest, hydraulic steady rest (bolt-tightened) or hydraulic tailstock is selected, the retraction speed of the tailstock spindle is limited to 7 m/min.＊6 12-station VDI quick-change turret (Sauter Trifix) specification＊710-station bolt-tightened turret, 16-station VDI turret, and 20-station bolt-tightened turret specifications＊812-station bolt-tightened turret specification＊912-station bolt-tightened turret, 16-station VDI turret, and 20-station bolt-tightened turret specifications● Bar work capacity: Depending on the chuck/cylinder used and its restrictions, it may not be possible to reach full bar work capacity.● Max. spindle speed: Depending on restrictions imposed by the workpiece clamping device, fixture and tool used, it may not be possible to rotate at the maximum spindle speed.● ANR: ANR refers to a standard atmospheric state; i.e., temperature at 20°C (68°F); absolute pressure at 101.3 kPa (14.7 psi); and relative humidity at 65%.● Power sources・Machine size: the actual values may differ from those specified in the catalogue, depending on the optional features and peripheral equipment.●Compressed air supply: Please be sure to supply clean compressed air <air pressure: 0.7 MPa (101.5 psi), pressure dew point: 10℃ (50°F) or below>. ● A criterion capacity to select a compressor is 90 L/min (23.8 gpm) per 0.75 kW (1 HP). However, this figure may differ depending on the type of compressors and options attached. For details, please check the compressor specifications.● When the tool tip air blow is regularly used, air supply of more than 300 L/min (79.2 gpm) is separately required.● The information in this catalog is valid as of November 2013.

NLX2500Y,SMC,SY/1250（130304）

NLX2500NLX2500MCNLX2500Y

NLX2500Rigid and Precise CNC Lathe

NLX2500SYNLX2500SMC

●　 The tool cabinet is DMSQP (DMG Mori Seiki Qualified Products), not standard equipment.

Compliance with safety standardsThe X-class machine complies with safety standards of the respective countries around the world. (CE marking, UL, ANSI and other standards)

CE marking: a conformance display

CE: Communauté Européenne

UL: Underwriters Laboratories Inc.

ANSI: American National Standards Institute

DMSQP： DMG Mori Seiki Qualified Products


Nagoya Head Office □ 2-35-16 Meieki, Nakamura-ku, Nagoya City, Aichi 450-0002, Japan Phone: +81-52-587-1811

Tokyo Branch □ 18th floor, Shinagawa Intercity Tower A, 2-15-1 Konan Minato-ku, Tokyo 108-6018, Japan Phone: +81-3-5460-3570Nara Campus Nara No. 1 Plant □ 362 Idono-cho, Yamato-Koriyama City, Nara 639-1183, Japan Phone: +81-743-53-1121 Nara No. 2 Plant □ 106 Kita-Koriyama-cho, Yamato-Koriyama City, Nara 639-1160, Japan Phone: +81-743-53-1125Iga Campus □ 201 Midai, Iga City, Mie 519-1414, Japan Phone: +81-595-45-4151Chiba Campus □ 488-19 Suzumi-cho, Funabashi City, Chiba 274-0052, Japan Phone: +81-47-410-8800

DMG MORI SEIKI CO., LTD.

EXPORTATION: All contracts are subject to export permit by the Government of Japan. Customer shall comply with the laws and regulations of the exporting country governing the exportation or re-exportation of the Equipment, including but not limited to the Export Administration Regulations. The Equipment is subject to export restrictions imposed by Japan and other exporting countries and the Customer will not export or permit the export of the Equipment anywhere outside the exporting country without proper government authorization. To prevent the illegal diversion of the Equipment to individuals or nations that threaten international security, it may include a “Relocation Machine Security Function” that automatically disables the Equipment if it is moved following installation. If the Equipment is so-disabled, it can only be re-enabled by contacting DMG MORI SEIKI or its distributor representative. DMG MORI SEIKI and its distributor representative may refuse to re-enable the Equipment if it determines that doing so would be an unauthorized export of technology or otherwise violates applicable export restrictions. DMG MORI SEIKI and its distributor representative shall have no obligation to re-enable such Equipment. DMG MORI SEIKI and its distributor representative shall have no liability (including for lost profits or business interruption or under the limited service warranty included herein) as a result of the Equipment being disabled.

<Precautions for Machine Relocation>

●　 DCG, DDM, BMT and ORC are trademarks or registered trademarks of DMG MORI SEIKI CO., LTD. in Japan, the USA and other countries.●　 If you have any questions regarding the content, contact our sales representative.●　 The information in this catalog is valid as of December 2013. Designs and specifications are subject to changes without notice.●　 The machines shown in the catalog may differ from the actual machines. The location and the size of the nameplates may also differ from the actual machines, or the nameplates may not be

attached to some machines.●　 DMG MORI SEIKI is not responsible for differences between the information in the catalog and the actual machine.

2-year warranty, twice the peace of mind. For machines delivered outside of Japan, parts relating to machine breakdown will be guaranteed free for 2 years from the date of installation, and labor costs to repair will be free for 1 year. Please contact our sales representative for details.

NLX2500-EB16V

V.1312.CDT.0000

Created in Japan

· rigid and precise cnc lathe nlx2500 . the premium machine to ... coolant cooling system...

Documents