riing plus h - thermaltake.azureedge.net · more language (deutsch, español, français, italiano,...

2
More Language (Deutsch, Español, Français, Italiano, Português, Русский, Türkçe, 简体中文, 正體中文, 日本語, ภาษาไทย) Please visit www.thermaltake.com Parts List A x 3 B x 1 C x 1 H x 1 Installation Guide 1 3 2 Install the fans properly onto the radiator. D x 1 E x 1 F x 1 G x 1 I x 12 J x 12 K x 1 4 Radiator Fan TT Premium Edition Riing Plus H Patented 256 Colors Fan Controller PCI Slot Controller PWM Cable Mainboard Signal Bridge Cable (ASUS/MSI) Mainboard Signal Bridge Cable (GIGABYTE) LED Signal Bridge Cable Bridge Cable Long Screw Short Screw Velcro Connect the fan cable in numerical order onto the controller. (Start from port 1) Connect the PWM cable onto the mainboard (4Pin PWM) and controller. 5 Please turn off the power before installation. Please turn off the power before installation. 1 2 3 M/B 4Pin PWM Connect the power cable to the SATA connector and controller. If you want use the PCI Slot Controller, connect the bridge cable to the PCI Slot Controller and controller. A A B D D C H

Upload: others

Post on 29-Aug-2019

15 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Riing Plus H - thermaltake.azureedge.net · More Language (Deutsch, Español, Français, Italiano, Português, Русский, Türkçe, 简体中文, 正體中文, 日本語, ภาษาไทย)

More Language (Deutsch, Español, Français, Italiano, Português,

Русский, Türkçe, 简体中文, 正體中文, 日本語, ภาษาไทย)

Please visit www.thermaltake.com

Parts List

A x 3 B x 1 C x 1

H x 1

Installation Guide

1

32

Install the fans properly onto the radiator.

D x 1 E x 1 F x 1

G x 1 I x 12 J x 12 K x 1

4

Radiator Fan TT Premium Edition

Riing PlusHPatented

256 Colors

Fan Controller PCI Slot Controller PWM Cable Mainboard Signal Bridge Cable (ASUS/MSI)

Mainboard Signal Bridge Cable (GIGABYTE)

LED Signal Bridge Cable Bridge Cable Long Screw Short Screw Velcro

Connect the fan cable in numerical order onto

the controller. (Start from port 1)

Connect the PWM cable onto the mainboard (4Pin PWM)

and controller.

5

Please turn off the power before installation.

Please turn off the power before installation.

12

3M/B 4Pin PWM

Connect the power cable to the SATA

connector and controller. If you want use the PCI Slot Controller, connect the bridge

cable to the PCI Slot Controller and controller.

A

A

B

D

D

C

H

210 mm

297 mm

刀模線

105G是X X 雙銅單色 無無

其他特殊處理效果表面處理2

厚度(g/m )折數 材質雙面印刷 印刷色彩單面印刷

規格樣式單張 CHECK DESIGN

藍色線條為尺寸標示,請勿印刷上去!

產品料號

CA-1J7-00M1WN-01 View 37 RGB 說明書(夾頁) 17/12/26 A

產品名稱 印刷項目 發稿日期 版本

Poki

(17/12/26)

Mike.Lin

(17/12/26)

Page 2: Riing Plus H - thermaltake.azureedge.net · More Language (Deutsch, Español, Français, Italiano, Português, Русский, Türkçe, 简体中文, 正體中文, 日本語, ภาษาไทย)

© 2018 Thermaltake Technology Co., Ltd. All Rights Reserved.

www.thermaltake.com

If you want more…

Controller

LED IN

LED OUT

NO.1 Controller

NO.2 Controller1. Please power off the PC and check the Positive and

Negative ends on the connector before connecting

the cable to mainboard. Connecting the wrong end

can damage the controller.

2. Mainboard software can only control the LED color,

once Mainboard software is activated, LED color

function on the controller is disabled. The fan speed

is controlled by the controller.

CAUTIONCAUTION

1. Fan Speed:

Switch over between 2 fan speed modes LED indicator shows Blue : Normal mode 800~1500 rpm LED indicator shows Red : Low noise mode 400~1000 rpm

2. Light Mode:

Switch over between 7 LED modes. Wave , Full Lighted, RGB Spectrum, Flow, Ripple, Pulse, Blink

3. Color Mode:

When light mode is in Full Lighted, Ripple, Pulse and Blink: Switch over 7 LED colors . Red, Yellow, Green, Teal, Blue, White, Purple When light mode is in RGB Spectrum: Click to memorize and lock the color you want, click again to unlock the 256

colors auto rotation. When light mode is in Wave and Flow : LED color can not be adjusted.

4. Light Speed:

Switch over between 4 light speed modes. Slow, Normal, Fast, Extreme

If you want to control LED color via mainboard software, you can use

the mianboard signal bridge cable to connect the controllers.

If you want to connect two or more connectors,

you can use the LED signal bridge cable to

connect the controllers.

Aura Addressable Strip Header(s)

or

AOURS RGB Fusion with Digital LEDs

ASUS/MSI GIGABYTE

LED IN

E

EF

G

or

F F

210 mm

297 mm

刀模線

105G是X X 雙銅單色 無無

其他特殊處理效果表面處理2

厚度(g/m )折數 材質雙面印刷 印刷色彩單面印刷

規格樣式單張 CHECK DESIGN

藍色線條為尺寸標示,請勿印刷上去!

產品料號

CA-1J7-00M1WN-01 View 37 RGB 說明書(夾頁) 17/12/26 A

產品名稱 印刷項目 發稿日期 版本

Poki

(17/12/26)

Mike.Lin

(17/12/26)