risser r 20150709_1430_unesco_fontenoy_-_room_ix
TRANSCRIPT
Roland RisserDirector, Building Technologies Office
Our Common Future Under Climate ChangeUS. Department of Energy’s Energy Efficiency and Renewable Energy Goals
2
U.S. Climate Goals
• Reduce GHG emissions 17% by 2020, 26-28% by 2025 and 83% by2050 (2005 baseline)
• By 2035, generate 80% of electricity from a diverse set of clean energy resources
• Double energy productivity by 2030
• Reduce net oil imports by half by 2020 (2008 baseline)
• Reduce CO2 emissions by 3 billion metric tons cumulatively by 2030through efficiency standards set between 2009 and 2016
3
Climate Policies Address All Sectors and Fuels
3
• Clean Power Plan• Building codes• Appliance &
equipment standards
• Appliance & Equipment standards
• Building codes• Green Mortgages• HFCs including SNAP
• HFCs including SNAP• Oil & Gas Methane• Efficiency standards and
programs
• Fuel economy standards
• Biofuels• Reduced VMT
• Interagency Methane Strategy• Agricultural programs
Sector Breakdown of 2012 Emissions
4
Recent EERE Accomplishments
DOE’s SuperTruckprogram enabled over 115% improvement in
tractor trailer efficiency
From 2009-2013 wind represented close to 30% of new electrical generation in
the U.S.
LED deployment within the U.S. has grown more than
90 times since 2009
5
Transportation Priorities
Program Goals
Vehicle Technologies • Cut battery costs by more than 50% by 2022• Eliminate almost 30% of vehicle weight by 2022• Cut the cost of electric drive systems by 50% by 2022• Demonstrate 35% fuel economy improvement for
passenger vehicles by 2020
Bioenergy Technologies • Make drop-in hydrocarbon fuels competitive with petroleum-based fuels (half the GHG emissions)
• Validate a mature technology plant model price of ethanol production of $2.15/gallon by 2017.
Hydrogen and Fuel Cell Technologies
• Reduce fuel cell system cost to $40/kW by 2020• Durability = 150,000 equivalent driving miles by 2020• Reduce the cost of renewably produced hydrogen to
$4/kg by 2020
6
Renewable Energy Priorities
Program Goals
Solar Energy • Concentrated Solar Power at $0.06/kWh by 2020• Utility-scale PV system at $1.00/Wdc by 2020• Commercial-scale PV system at $1.25/Wdc by 2020• Residential-scale PV system at $1.50/Wdc by 2020
Wind Energy • Utility-scale land wind at $0.042/kWh by 2030• Offshore wind energy systems $0.14/kWh by 2030• Wind makes up to 20% of U.S. electricity demand in 2030
Water Power • Improve components to allow an increase in wave energy conversion system power-to-weight ratio of 100%
• Expand the contribution of hydropower and pumped-storage hydropower in all identified resource classes
Geothermal technologies • 5-MW enhanced geothermal systems reservoir by 2020• Levelized cost of electricity from new geothermal systems
$0.06/kWh by 2030
7
End-Use Efficiency Priorities
Program Goals
Advanced Manufacturing • U.S. industry reduce its energy intensity by 2.5% per year
• Reduce life-cycle energy use by 50% in manufacturing processes and products
• Demonstrate technical and economic viability of energy management approaches (building off of ISO 50001)
Building Technologies • Reduce U.S. building-related energy use by 50 percent by2040
Federal Energy Management Program
• Reduce government-wide direct greenhouse gas emissions from targeted sources by 28% in FY 2020
• Ensure that 20% of federal electricity consumption is generated from renewable sources by 2020
Weatherization and Intergovernmental Activities
• Retrofit/Weatherize 300,000 homes of low-income families by 2022
• Accelerate investments in State and Local Sector Energy-Savings Performance Contract (ESPC)
8
Grid Modernization Initiative
Seamlessly integrating emerging technologies into the grid in a safe, reliable, and
cost-effective manner is critical to enable deployment at scale.
9
Low-GWP Advanced Cooling Has International Impacts
MagnetocaloricRefrigeration is just one solution that emits zero GWP
Year
Cap
(P
erc
en
t o
f B
ase
line
)
Source: Goetzler et al., 2014, “Research & Development Roadmap for Next-Generation Low Global Warming Potential Refrigerants, http://energy.gov/eere/buildings/downloads/research-development-roadmap-next-generation-low-global-warming-potential
Near-Term:
Develop low-GWP refrigerant replacements
Long-Term:
Eliminate GWP refrigerants entirely
10
Market Barrier DOE Activity Result
Technology isn’t available in market at reasonable price…
InnovationChallenge
… manufacturers are encouraged to develop a viable product that is not currently on the market.
Uncertain about real world performance…
Tech Demonstration
…a HIT is installed and monitored in a real world setting with energy performance communicated via a case study.
There are too many questions on how to choose or purchase …
Support Resources
… assistance on how to select, size, install, and properly operate a HIT to maximize energy performance is provided.
They are waiting until the broader market adopts…
Tech AdoptionCampaign
… end users (such as Better Buildings Alliance members) are encouraged to commit to installing the High Impact Technology.
High Impact Technology (HIT) Catalyst Program: Identify and guide technologies through early market introduction phases…
How We Stimulate Technology Adoption in the Market
Pre-
Adoption
All Early
Adopters …ultimately leading to broad market adoption.
11
Standards & Codes Lock in Savings
Building Energy Codes and Appliance Standards have proven to be one of our most effective methods in creating large energy savings,
utility bill savings, and CO2 reduction
Building Energy Codes Cumulative Savings (2010 – 2030)
– Energy savings: 14 quads
– Cost savings: $125 billion
– CO2 reduction: 1 billion metric tons
Appliance Standards Cumulative Savings (2009 -2030)
– Energy savings: 40 quads
– Cost savings: $480 billion
– CO2 reduction: 2.2 billion metric tons
12
Thinking Globally - ISO 50001 Energy Management
• ISO 50001 is an International Energy Management Standard for Industrial and Commercial customers that specifies the requirements for establishing, implementing, maintaining and improving an energy management system
• ISO 50001 offers a compliance pathway for many national mandatory or voluntary energy management policies
• ISO 50001 is a great opportunity for multi-lateral cooperation across more than 50 countries—aligned definitions allow for improved cross-border comparisons – a key feature of our climate goals